[PATCH] Clean up IRQ mapping code
On the larger ppc64 machines we remap the interrupt numbers used by the hardware/firmware to virtual IRQ numbers < NR_IRQS. Up until now we have used an array for the "real" (hardware) -> virtual IRQ number mapping, but with new machines coming out that will have 24-bit hardware IRQ numbers, this will break. However, in fact it is only the XICS interrupt controller which cares about this mapping. This patch moves that side of the mapping (real -> virtual) into the XICS code and makes it use a radix tree. On iSeries we have a similar issue, where the "real" IRQ numbers that we need are in fact an encoding of the bus/device/function address of the device. This patch fixes iSeries to use the virt->real IRQ mapping, allowing us to support larger iSeries machines. This patch also gets rid of the temporary hack that Stephen Rothwell submitted. On machines with OpenPIC (including the G5) the mapping is explicitly 1-1, and that hasn't changed. For other machines this patch cleans up and simplifies the code that sets up the virtual->real mapping. I have tested this code and verified that G5, pSeries and iSeries boot and run correctly with this patch.
Showing
Please register or sign in to comment