Skip to content

L
linux
Commit a9f8f40a authored by David S. Miller's avatar David S. Miller
Browse files
Options

Merge branch 'selftests-forwarding-Add-tests-for-VXLAN-routing' 

Ido Schimmel says:

====================
selftests: forwarding: Add tests for VXLAN routing

VXLAN routing allows hosts in different overlay networks (i.e.,
different VNIs) to communicate with one another.

Two popular routing models are asymmetric and symmetric routing.

In asymmetric routing the ingress VTEP routes the packet into the
correct VXLAN tunnel, whereas the egress VTEP only bridges the packet to
the correct host. Therefore, packets in different directions use
different VNIs - the target VNI.

In symmetric routing both the ingress and egress VTEPs perform routing
in the overlay network into / from the VXLAN tunnel. Packets in
different directions use the same VNI - the L3 VNI. Different tenants
(VRFs) use different L3 VNIs.

Patch #1 adds a test for asymmetric routing. Patches #2-#3 reuse the
topology and add test cases for ARP decapsulation and suppression.

Patch #4 adds a test for symmetric routing.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents a2ff7e49 4dba72fd
Show whitespace changes
Inline Side-by-side
Showing with 1118 additions and 0 deletions
tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh 0 → 100755
View file @ a9f8f40a
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# +---------------------------+ +------------------------------+
# | vrf-h1 | | vrf-h2 |
# | + $h1 | | + $h2 |
# | | 10.1.1.101/24 | | | 10.1.2.101/24 |
# | | default via 10.1.1.1 | | | default via 10.1.2.1 |
# +----|----------------------+ +----|-------------------------+
# | |
# +----|--------------------------------------------|-------------------------+
# | SW | | |
# | +--|--------------------------------------------|-----------------------+ |
# | | + $swp1 br1 + $swp2 | |
# | | vid 10 pvid untagged vid 20 pvid untagged | |
# | | | |
# | | + vx10 + vx20 | |
# | | local 10.0.0.1 local 10.0.0.1 | |
# | | remote 10.0.0.2 remote 10.0.0.2 | |
# | | id 1000 id 2000 | |
# | | dstport 4789 dstport 4789 | |
# | | vid 10 pvid untagged vid 20 pvid untagged | |
# | | | |
# | +-----------------------------------+-----------------------------------+ |
# | | |
# | +-----------------------------------|-----------------------------------+ |
# | | | | |
# | | +--------------------------------+--------------------------------+ | |
# | | | | | |
# | | + vlan10 vlan20 + | |
# | | | 10.1.1.11/24 10.1.2.11/24 | | |
# | | | | | |
# | | + vlan10-v (macvlan) vlan20-v (macvlan) + | |
# | | 10.1.1.1/24 10.1.2.1/24 | |
# | | 00:00:5e:00:01:01 00:00:5e:00:01:01 | |
# | | vrf-green | |
# | +-----------------------------------------------------------------------+ |
# | |
# | + $rp1 +lo |
# | | 192.0.2.1/24 10.0.0.1/32 |
# +----|----------------------------------------------------------------------+
# |
# +----|--------------------------------------------------------+
# | | vrf-spine |
# | + $rp2 |
# | 192.0.2.2/24 |
# | | (maybe) HW
# =============================================================================
# | | (likely) SW
# | |
# | + v1 (veth) |
# | | 192.0.3.2/24 |
# +----|--------------------------------------------------------+
# |
# +----|----------------------------------------------------------------------+
# | + v2 (veth) +lo NS1 (netns) |
# | 192.0.3.1/24 10.0.0.2/32 |
# | |
# | +-----------------------------------------------------------------------+ |
# | | vrf-green | |
# | | + vlan10-v (macvlan) vlan20-v (macvlan) + | |
# | | | 10.1.1.1/24 10.1.2.1/24 | | |
# | | | 00:00:5e:00:01:01 00:00:5e:00:01:01 | | |
# | | | | | |
# | | + vlan10 vlan20 + | |
# | | | 10.1.1.12/24 10.1.2.12/24 | | |
# | | | | | |
# | | +--------------------------------+--------------------------------+ | |
# | | | | |
# | +-----------------------------------|-----------------------------------+ |
# | | |
# | +-----------------------------------+-----------------------------------+ |
# | | | |
# | | + vx10 + vx20 | |
# | | local 10.0.0.2 local 10.0.0.2 | |
# | | remote 10.0.0.1 remote 10.0.0.1 | |
# | | id 1000 id 2000 | |
# | | dstport 4789 dstport 4789 | |
# | | vid 10 pvid untagged vid 20 pvid untagged | |
# | | | |
# | | + w1 (veth) + w3 (veth) | |
# | | | vid 10 pvid untagged br1 | vid 20 pvid untagged | |
# | +--|------------------------------------------|-------------------------+ |
# | | | |
# | | | |
# | +--|----------------------+ +--|-------------------------+ |
# | | | vrf-h1 | | | vrf-h2 | |
# | | + w2 (veth) | | + w4 (veth) | |
# | | 10.1.1.102/24 | | 10.1.2.102/24 | |
# | | default via 10.1.1.1 | | default via 10.1.2.1 | |
# | +-------------------------+ +----------------------------+ |
# +---------------------------------------------------------------------------+
ALL_TESTS="
ping_ipv4
arp_decap
arp_suppression
"
NUM_NETIFS=6
source lib.sh
require_command $ARPING
hx_create()
{
local vrf_name=$1; shift
local if_name=$1; shift
local ip_addr=$1; shift
local gw_ip=$1; shift
vrf_create $vrf_name
ip link set dev $if_name master $vrf_name
ip link set dev $vrf_name up
ip link set dev $if_name up
ip address add $ip_addr/24 dev $if_name
ip neigh replace $gw_ip lladdr 00:00:5e:00:01:01 nud permanent \
dev $if_name
ip route add default vrf $vrf_name nexthop via $gw_ip
}
export -f hx_create
hx_destroy()
{
local vrf_name=$1; shift
local if_name=$1; shift
local ip_addr=$1; shift
local gw_ip=$1; shift
ip route del default vrf $vrf_name nexthop via $gw_ip
ip neigh del $gw_ip dev $if_name
ip address del $ip_addr/24 dev $if_name
ip link set dev $if_name down
vrf_destroy $vrf_name
}
h1_create()
{
hx_create "vrf-h1" $h1 10.1.1.101 10.1.1.1
}
h1_destroy()
{
hx_destroy "vrf-h1" $h1 10.1.1.101 10.1.1.1
}
h2_create()
{
hx_create "vrf-h2" $h2 10.1.2.101 10.1.2.1
}
h2_destroy()
{
hx_destroy "vrf-h2" $h2 10.1.2.101 10.1.2.1
}
switch_create()
{
ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \
mcast_snooping 0
# Make sure the bridge uses the MAC address of the local port and not
# that of the VxLAN's device.
ip link set dev br1 address $(mac_get $swp1)
ip link set dev br1 up
ip link set dev $rp1 up
ip address add dev $rp1 192.0.2.1/24
ip route add 10.0.0.2/32 nexthop via 192.0.2.2
ip link add name vx10 type vxlan id 1000 \
local 10.0.0.1 remote 10.0.0.2 dstport 4789 \
nolearning noudpcsum tos inherit ttl 100
ip link set dev vx10 up
ip link set dev vx10 master br1
bridge vlan add vid 10 dev vx10 pvid untagged
ip link add name vx20 type vxlan id 2000 \
local 10.0.0.1 remote 10.0.0.2 dstport 4789 \
nolearning noudpcsum tos inherit ttl 100
ip link set dev vx20 up
ip link set dev vx20 master br1
bridge vlan add vid 20 dev vx20 pvid untagged
ip link set dev $swp1 master br1
ip link set dev $swp1 up
bridge vlan add vid 10 dev $swp1 pvid untagged
ip link set dev $swp2 master br1
ip link set dev $swp2 up
bridge vlan add vid 20 dev $swp2 pvid untagged
ip address add 10.0.0.1/32 dev lo
# Create SVIs
vrf_create "vrf-green"
ip link set dev vrf-green up
ip link add link br1 name vlan10 up master vrf-green type vlan id 10
ip address add 10.1.1.11/24 dev vlan10
ip link add link vlan10 name vlan10-v up master vrf-green \
address 00:00:5e:00:01:01 type macvlan mode private
ip address add 10.1.1.1/24 dev vlan10-v
ip link add link br1 name vlan20 up master vrf-green type vlan id 20
ip address add 10.1.2.11/24 dev vlan20
ip link add link vlan20 name vlan20-v up master vrf-green \
address 00:00:5e:00:01:01 type macvlan mode private
ip address add 10.1.2.1/24 dev vlan20-v
bridge vlan add vid 10 dev br1 self
bridge vlan add vid 20 dev br1 self
bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
}
switch_destroy()
{
bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 20
bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 10
bridge vlan del vid 20 dev br1 self
bridge vlan del vid 10 dev br1 self
ip link del dev vlan20
ip link del dev vlan10
vrf_destroy "vrf-green"
ip address del 10.0.0.1/32 dev lo
bridge vlan del vid 20 dev $swp2
ip link set dev $swp2 down
ip link set dev $swp2 nomaster
bridge vlan del vid 10 dev $swp1
ip link set dev $swp1 down
ip link set dev $swp1 nomaster
bridge vlan del vid 20 dev vx20
ip link set dev vx20 nomaster
ip link set dev vx20 down
ip link del dev vx20
bridge vlan del vid 10 dev vx10
ip link set dev vx10 nomaster
ip link set dev vx10 down
ip link del dev vx10
ip route del 10.0.0.2/32 nexthop via 192.0.2.2
ip address del dev $rp1 192.0.2.1/24
ip link set dev $rp1 down
ip link set dev br1 down
ip link del dev br1
}
spine_create()
{
vrf_create "vrf-spine"
ip link set dev $rp2 master vrf-spine
ip link set dev v1 master vrf-spine
ip link set dev vrf-spine up
ip link set dev $rp2 up
ip link set dev v1 up
ip address add 192.0.2.2/24 dev $rp2
ip address add 192.0.3.2/24 dev v1
ip route add 10.0.0.1/32 vrf vrf-spine nexthop via 192.0.2.1
ip route add 10.0.0.2/32 vrf vrf-spine nexthop via 192.0.3.1
}
spine_destroy()
{
ip route del 10.0.0.2/32 vrf vrf-spine nexthop via 192.0.3.1
ip route del 10.0.0.1/32 vrf vrf-spine nexthop via 192.0.2.1
ip address del 192.0.3.2/24 dev v1
ip address del 192.0.2.2/24 dev $rp2
ip link set dev v1 down
ip link set dev $rp2 down
vrf_destroy "vrf-spine"
}
ns_h1_create()
{
hx_create "vrf-h1" w2 10.1.1.102 10.1.1.1
}
export -f ns_h1_create
ns_h2_create()
{
hx_create "vrf-h2" w4 10.1.2.102 10.1.2.1
}
export -f ns_h2_create
ns_switch_create()
{
ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \
mcast_snooping 0
ip link set dev br1 up
ip link set dev v2 up
ip address add dev v2 192.0.3.1/24
ip route add 10.0.0.1/32 nexthop via 192.0.3.2
ip link add name vx10 type vxlan id 1000 \
local 10.0.0.2 remote 10.0.0.1 dstport 4789 \
nolearning noudpcsum tos inherit ttl 100
ip link set dev vx10 up
ip link set dev vx10 master br1
bridge vlan add vid 10 dev vx10 pvid untagged
ip link add name vx20 type vxlan id 2000 \
local 10.0.0.2 remote 10.0.0.1 dstport 4789 \
nolearning noudpcsum tos inherit ttl 100
ip link set dev vx20 up
ip link set dev vx20 master br1
bridge vlan add vid 20 dev vx20 pvid untagged
ip link set dev w1 master br1
ip link set dev w1 up
bridge vlan add vid 10 dev w1 pvid untagged
ip link set dev w3 master br1
ip link set dev w3 up
bridge vlan add vid 20 dev w3 pvid untagged
ip address add 10.0.0.2/32 dev lo
# Create SVIs
vrf_create "vrf-green"
ip link set dev vrf-green up
ip link add link br1 name vlan10 up master vrf-green type vlan id 10
ip address add 10.1.1.12/24 dev vlan10
ip link add link vlan10 name vlan10-v up master vrf-green \
address 00:00:5e:00:01:01 type macvlan mode private
ip address add 10.1.1.1/24 dev vlan10-v
ip link add link br1 name vlan20 up master vrf-green type vlan id 20
ip address add 10.1.2.12/24 dev vlan20
ip link add link vlan20 name vlan20-v up master vrf-green \
address 00:00:5e:00:01:01 type macvlan mode private
ip address add 10.1.2.1/24 dev vlan20-v
bridge vlan add vid 10 dev br1 self
bridge vlan add vid 20 dev br1 self
bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
}
export -f ns_switch_create
ns_init()
{
ip link add name w1 type veth peer name w2
ip link add name w3 type veth peer name w4
ip link set dev lo up
ns_h1_create
ns_h2_create
ns_switch_create
}
export -f ns_init
ns1_create()
{
ip netns add ns1
ip link set dev v2 netns ns1
in_ns ns1 ns_init
}
ns1_destroy()
{
ip netns exec ns1 ip link set dev v2 netns 1
ip netns del ns1
}
macs_populate()
{
local mac1=$1; shift
local mac2=$1; shift
local ip1=$1; shift
local ip2=$1; shift
local dst=$1; shift
bridge fdb add $mac1 dev vx10 self master extern_learn static \
dst $dst vlan 10
bridge fdb add $mac2 dev vx20 self master extern_learn static \
dst $dst vlan 20
ip neigh add $ip1 lladdr $mac1 nud noarp dev vlan10 \
extern_learn
ip neigh add $ip2 lladdr $mac2 nud noarp dev vlan20 \
extern_learn
}
export -f macs_populate
macs_initialize()
{
local h1_ns_mac=$(in_ns ns1 mac_get w2)
local h2_ns_mac=$(in_ns ns1 mac_get w4)
local h1_mac=$(mac_get $h1)
local h2_mac=$(mac_get $h2)
macs_populate $h1_ns_mac $h2_ns_mac 10.1.1.102 10.1.2.102 10.0.0.2
in_ns ns1 macs_populate $h1_mac $h2_mac 10.1.1.101 10.1.2.101 10.0.0.1
}
setup_prepare()
{
h1=${NETIFS[p1]}
swp1=${NETIFS[p2]}
swp2=${NETIFS[p3]}
h2=${NETIFS[p4]}
rp1=${NETIFS[p5]}
rp2=${NETIFS[p6]}
vrf_prepare
forwarding_enable
h1_create
h2_create
switch_create
ip link add name v1 type veth peer name v2
spine_create
ns1_create
macs_initialize
}
cleanup()
{
pre_cleanup
ns1_destroy
spine_destroy
ip link del dev v1
switch_destroy
h2_destroy
h1_destroy
forwarding_restore
vrf_cleanup
}
ping_ipv4()
{
ping_test $h1 10.1.2.101 ": local->local vid 10->vid 20"
ping_test $h1 10.1.1.102 ": local->remote vid 10->vid 10"
ping_test $h2 10.1.2.102 ": local->remote vid 20->vid 20"
ping_test $h1 10.1.2.102 ": local->remote vid 10->vid 20"
ping_test $h2 10.1.1.102 ": local->remote vid 20->vid 10"
}
arp_decap()
{
# Repeat the ping tests, but without populating the neighbours. This
# makes sure we correctly decapsulate ARP packets
log_info "deleting neighbours from vlan interfaces"
ip neigh del 10.1.1.102 dev vlan10
ip neigh del 10.1.2.102 dev vlan20
ping_ipv4
ip neigh replace 10.1.1.102 lladdr $(in_ns ns1 mac_get w2) nud noarp \
dev vlan10 extern_learn
ip neigh replace 10.1.2.102 lladdr $(in_ns ns1 mac_get w4) nud noarp \
dev vlan20 extern_learn
}
arp_suppression_compare()
{
local expect=$1; shift
local actual=$(in_ns ns1 tc_rule_stats_get vx10 1 ingress)
(( expect == actual ))
check_err $? "expected $expect arps got $actual"
}
arp_suppression()
{
ip link set dev vx10 type bridge_slave neigh_suppress on
in_ns ns1 tc qdisc add dev vx10 clsact
in_ns ns1 tc filter add dev vx10 ingress proto arp pref 1 handle 101 \
flower dst_mac ff:ff:ff:ff:ff:ff arp_tip 10.1.1.102 arp_op \
request action pass
# The neighbour is configured on the SVI and ARP suppression is on, so
# the ARP request should be suppressed
RET=0
$ARPING -I $h1 -fqb -c 1 -w 1 10.1.1.102
check_err $? "arping failed"
arp_suppression_compare 0
log_test "neigh_suppress: on / neigh exists: yes"
# Delete the neighbour from the the SVI. A single ARP request should be
# received by the remote VTEP
RET=0
ip neigh del 10.1.1.102 dev vlan10
$ARPING -I $h1 -fqb -c 1 -w 1 10.1.1.102
check_err $? "arping failed"
arp_suppression_compare 1
log_test "neigh_suppress: on / neigh exists: no"
# Turn off ARP suppression and make sure ARP is not suppressed,
# regardless of neighbour existence on the SVI
RET=0
ip neigh del 10.1.1.102 dev vlan10 &> /dev/null
ip link set dev vx10 type bridge_slave neigh_suppress off
$ARPING -I $h1 -fqb -c 1 -w 1 10.1.1.102
check_err $? "arping failed"
arp_suppression_compare 2
log_test "neigh_suppress: off / neigh exists: no"
RET=0
ip neigh add 10.1.1.102 lladdr $(in_ns ns1 mac_get w2) nud noarp \
dev vlan10 extern_learn
$ARPING -I $h1 -fqb -c 1 -w 1 10.1.1.102
check_err $? "arping failed"
arp_suppression_compare 3
log_test "neigh_suppress: off / neigh exists: yes"
in_ns ns1 tc qdisc del dev vx10 clsact
}
trap cleanup EXIT
setup_prepare
setup_wait
tests_run
exit $EXIT_STATUS
tools/testing/selftests/net/forwarding/vxlan_symmetric.sh 0 → 100755
View file @ a9f8f40a
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# +---------------------------+ +------------------------------+
# | vrf-h1 | | vrf-h2 |
# | + $h1 | | + $h2 |
# | | 10.1.1.101/24 | | | 10.1.2.101/24 |
# | | default via 10.1.1.1 | | | default via 10.1.2.1 |
# +----|----------------------+ +----|-------------------------+
# | |
# +----|--------------------------------------------|-------------------------+
# | SW | | |
# | +--|--------------------------------------------|-----------------------+ |
# | | + $swp1 br1 + $swp2 | |
# | | vid 10 pvid untagged vid 20 pvid untagged | |
# | | | |
# | | + vx10 + vx20 | |
# | | local 10.0.0.1 local 10.0.0.1 | |
# | | remote 10.0.0.2 remote 10.0.0.2 | |
# | | id 1010 id 1020 | |
# | | dstport 4789 dstport 4789 | |
# | | vid 10 pvid untagged vid 20 pvid untagged | |
# | | | |
# | | + vx4001 | |
# | | local 10.0.0.1 | |
# | | remote 10.0.0.2 | |
# | | id 104001 | |
# | | dstport 4789 | |
# | | vid 4001 pvid untagged | |
# | | | |
# | +-----------------------------------+-----------------------------------+ |
# | | |
# | +-----------------------------------|-----------------------------------+ |
# | | | | |
# | | +--------------------------------+--------------------------------+ | |
# | | | | | | |
# | | + vlan10 | vlan20 + | |
# | | | 10.1.1.11/24 | 10.1.2.11/24 | | |
# | | | | | | |
# | | + vlan10-v (macvlan) + vlan20-v (macvlan) + | |
# | | 10.1.1.1/24 vlan4001 10.1.2.1/24 | |
# | | 00:00:5e:00:01:01 00:00:5e:00:01:01 | |
# | | vrf-green | |
# | +-----------------------------------------------------------------------+ |
# | |
# | + $rp1 +lo |
# | | 192.0.2.1/24 10.0.0.1/32 |
# +----|----------------------------------------------------------------------+
# |
# +----|--------------------------------------------------------+
# | | vrf-spine |
# | + $rp2 |
# | 192.0.2.2/24 |
# | | (maybe) HW
# =============================================================================
# | | (likely) SW
# | |
# | + v1 (veth) |
# | | 192.0.3.2/24 |
# +----|--------------------------------------------------------+
# |
# +----|----------------------------------------------------------------------+
# | + v2 (veth) +lo NS1 (netns) |
# | 192.0.3.1/24 10.0.0.2/32 |
# | |
# | +-----------------------------------------------------------------------+ |
# | | vrf-green | |
# | | + vlan10-v (macvlan) vlan20-v (macvlan) + | |
# | | | 10.1.1.1/24 10.1.2.1/24 | | |
# | | | 00:00:5e:00:01:01 00:00:5e:00:01:01 | | |
# | | | vlan4001 | | |
# | | + vlan10 + vlan20 + | |
# | | | 10.1.1.12/24 | 10.1.2.12/24 | | |
# | | | | | | |
# | | +--------------------------------+--------------------------------+ | |
# | | | | |
# | +-----------------------------------|-----------------------------------+ |
# | | |
# | +-----------------------------------+-----------------------------------+ |
# | | | |
# | | + vx10 + vx20 | |
# | | local 10.0.0.2 local 10.0.0.2 | |
# | | remote 10.0.0.1 remote 10.0.0.1 | |
# | | id 1010 id 1020 | |
# | | dstport 4789 dstport 4789 | |
# | | vid 10 pvid untagged vid 20 pvid untagged | |
# | | | |
# | | + vx4001 | |
# | | local 10.0.0.2 | |
# | | remote 10.0.0.1 | |
# | | id 104001 | |
# | | dstport 4789 | |
# | | vid 4001 pvid untagged | |
# | | | |
# | | + w1 (veth) + w3 (veth) | |
# | | | vid 10 pvid untagged br1 | vid 20 pvid untagged | |
# | +--|------------------------------------------|-------------------------+ |
# | | | |
# | | | |
# | +--|----------------------+ +--|-------------------------+ |
# | | | vrf-h1 | | | vrf-h2 | |
# | | + w2 (veth) | | + w4 (veth) | |
# | | 10.1.1.102/24 | | 10.1.2.102/24 | |
# | | default via 10.1.1.1 | | default via 10.1.2.1 | |
# | +-------------------------+ +----------------------------+ |
# +---------------------------------------------------------------------------+
ALL_TESTS="
ping_ipv4
"
NUM_NETIFS=6
source lib.sh
hx_create()
{
local vrf_name=$1; shift
local if_name=$1; shift
local ip_addr=$1; shift
local gw_ip=$1; shift
vrf_create $vrf_name
ip link set dev $if_name master $vrf_name
ip link set dev $vrf_name up
ip link set dev $if_name up
ip address add $ip_addr/24 dev $if_name
ip neigh replace $gw_ip lladdr 00:00:5e:00:01:01 nud permanent \
dev $if_name
ip route add default vrf $vrf_name nexthop via $gw_ip
}
export -f hx_create
hx_destroy()
{
local vrf_name=$1; shift
local if_name=$1; shift
local ip_addr=$1; shift
local gw_ip=$1; shift
ip route del default vrf $vrf_name nexthop via $gw_ip
ip neigh del $gw_ip dev $if_name
ip address del $ip_addr/24 dev $if_name
ip link set dev $if_name down
vrf_destroy $vrf_name
}
h1_create()
{
hx_create "vrf-h1" $h1 10.1.1.101 10.1.1.1
}
h1_destroy()
{
hx_destroy "vrf-h1" $h1 10.1.1.101 10.1.1.1
}
h2_create()
{
hx_create "vrf-h2" $h2 10.1.2.101 10.1.2.1
}
h2_destroy()
{
hx_destroy "vrf-h2" $h2 10.1.2.101 10.1.2.1
}
switch_create()
{
ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \
mcast_snooping 0
# Make sure the bridge uses the MAC address of the local port and not
# that of the VxLAN's device.
ip link set dev br1 address $(mac_get $swp1)
ip link set dev br1 up
ip link set dev $rp1 up
ip address add dev $rp1 192.0.2.1/24
ip route add 10.0.0.2/32 nexthop via 192.0.2.2
ip link add name vx10 type vxlan id 1010 \
local 10.0.0.1 remote 10.0.0.2 dstport 4789 \
nolearning noudpcsum tos inherit ttl 100
ip link set dev vx10 up
ip link set dev vx10 master br1
bridge vlan add vid 10 dev vx10 pvid untagged
ip link add name vx20 type vxlan id 1020 \
local 10.0.0.1 remote 10.0.0.2 dstport 4789 \
nolearning noudpcsum tos inherit ttl 100
ip link set dev vx20 up
ip link set dev vx20 master br1
bridge vlan add vid 20 dev vx20 pvid untagged
ip link set dev $swp1 master br1
ip link set dev $swp1 up
bridge vlan add vid 10 dev $swp1 pvid untagged
ip link set dev $swp2 master br1
ip link set dev $swp2 up
bridge vlan add vid 20 dev $swp2 pvid untagged
ip link add name vx4001 type vxlan id 104001 \
local 10.0.0.1 dstport 4789 \
nolearning noudpcsum tos inherit ttl 100
ip link set dev vx4001 up
ip link set dev vx4001 master br1
bridge vlan add vid 4001 dev vx4001 pvid untagged
ip address add 10.0.0.1/32 dev lo
# Create SVIs
vrf_create "vrf-green"
ip link set dev vrf-green up
ip link add link br1 name vlan10 up master vrf-green type vlan id 10
ip address add 10.1.1.11/24 dev vlan10
ip link add link vlan10 name vlan10-v up master vrf-green \
address 00:00:5e:00:01:01 type macvlan mode private
ip address add 10.1.1.1/24 dev vlan10-v
ip link add link br1 name vlan20 up master vrf-green type vlan id 20
ip address add 10.1.2.11/24 dev vlan20
ip link add link vlan20 name vlan20-v up master vrf-green \
address 00:00:5e:00:01:01 type macvlan mode private
ip address add 10.1.2.1/24 dev vlan20-v
ip link add link br1 name vlan4001 up master vrf-green \
type vlan id 4001
bridge vlan add vid 10 dev br1 self
bridge vlan add vid 20 dev br1 self
bridge vlan add vid 4001 dev br1 self
bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
}
switch_destroy()
{
bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 20
bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 10
bridge vlan del vid 4001 dev br1 self
bridge vlan del vid 20 dev br1 self
bridge vlan del vid 10 dev br1 self
ip link del dev vlan4001
ip link del dev vlan20
ip link del dev vlan10
vrf_destroy "vrf-green"
ip address del 10.0.0.1/32 dev lo
bridge vlan del vid 20 dev $swp2
ip link set dev $swp2 down
ip link set dev $swp2 nomaster
bridge vlan del vid 10 dev $swp1
ip link set dev $swp1 down
ip link set dev $swp1 nomaster
bridge vlan del vid 4001 dev vx4001
ip link set dev vx4001 nomaster
ip link set dev vx4001 down
ip link del dev vx4001
bridge vlan del vid 20 dev vx20
ip link set dev vx20 nomaster
ip link set dev vx20 down
ip link del dev vx20
bridge vlan del vid 10 dev vx10
ip link set dev vx10 nomaster
ip link set dev vx10 down
ip link del dev vx10
ip route del 10.0.0.2/32 nexthop via 192.0.2.2
ip address del dev $rp1 192.0.2.1/24
ip link set dev $rp1 down
ip link set dev br1 down
ip link del dev br1
}
spine_create()
{
vrf_create "vrf-spine"
ip link set dev $rp2 master vrf-spine
ip link set dev v1 master vrf-spine
ip link set dev vrf-spine up
ip link set dev $rp2 up
ip link set dev v1 up
ip address add 192.0.2.2/24 dev $rp2
ip address add 192.0.3.2/24 dev v1
ip route add 10.0.0.1/32 vrf vrf-spine nexthop via 192.0.2.1
ip route add 10.0.0.2/32 vrf vrf-spine nexthop via 192.0.3.1
}
spine_destroy()
{
ip route del 10.0.0.2/32 vrf vrf-spine nexthop via 192.0.3.1
ip route del 10.0.0.1/32 vrf vrf-spine nexthop via 192.0.2.1
ip address del 192.0.3.2/24 dev v1
ip address del 192.0.2.2/24 dev $rp2
ip link set dev v1 down
ip link set dev $rp2 down
vrf_destroy "vrf-spine"
}
ns_h1_create()
{
hx_create "vrf-h1" w2 10.1.1.102 10.1.1.1
}
export -f ns_h1_create
ns_h2_create()
{
hx_create "vrf-h2" w4 10.1.2.102 10.1.2.1
}
export -f ns_h2_create
ns_switch_create()
{
ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \
mcast_snooping 0
ip link set dev br1 up
ip link set dev v2 up
ip address add dev v2 192.0.3.1/24
ip route add 10.0.0.1/32 nexthop via 192.0.3.2
ip link add name vx10 type vxlan id 1010 \
local 10.0.0.2 remote 10.0.0.1 dstport 4789 \
nolearning noudpcsum tos inherit ttl 100
ip link set dev vx10 up
ip link set dev vx10 master br1
bridge vlan add vid 10 dev vx10 pvid untagged
ip link add name vx20 type vxlan id 1020 \
local 10.0.0.2 remote 10.0.0.1 dstport 4789 \
nolearning noudpcsum tos inherit ttl 100
ip link set dev vx20 up
ip link set dev vx20 master br1
bridge vlan add vid 20 dev vx20 pvid untagged
ip link add name vx4001 type vxlan id 104001 \
local 10.0.0.2 dstport 4789 \
nolearning noudpcsum tos inherit ttl 100
ip link set dev vx4001 up
ip link set dev vx4001 master br1
bridge vlan add vid 4001 dev vx4001 pvid untagged
ip link set dev w1 master br1
ip link set dev w1 up
bridge vlan add vid 10 dev w1 pvid untagged
ip link set dev w3 master br1
ip link set dev w3 up
bridge vlan add vid 20 dev w3 pvid untagged
ip address add 10.0.0.2/32 dev lo
# Create SVIs
vrf_create "vrf-green"
ip link set dev vrf-green up
ip link add link br1 name vlan10 up master vrf-green type vlan id 10
ip address add 10.1.1.12/24 dev vlan10
ip link add link vlan10 name vlan10-v up master vrf-green \
address 00:00:5e:00:01:01 type macvlan mode private
ip address add 10.1.1.1/24 dev vlan10-v
ip link add link br1 name vlan20 up master vrf-green type vlan id 20
ip address add 10.1.2.12/24 dev vlan20
ip link add link vlan20 name vlan20-v up master vrf-green \
address 00:00:5e:00:01:01 type macvlan mode private
ip address add 10.1.2.1/24 dev vlan20-v
ip link add link br1 name vlan4001 up master vrf-green \
type vlan id 4001
bridge vlan add vid 10 dev br1 self
bridge vlan add vid 20 dev br1 self
bridge vlan add vid 4001 dev br1 self
bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
}
export -f ns_switch_create
ns_init()
{
ip link add name w1 type veth peer name w2
ip link add name w3 type veth peer name w4
ip link set dev lo up
ns_h1_create
ns_h2_create
ns_switch_create
}
export -f ns_init
ns1_create()
{
ip netns add ns1
ip link set dev v2 netns ns1
in_ns ns1 ns_init
}
ns1_destroy()
{
ip netns exec ns1 ip link set dev v2 netns 1
ip netns del ns1
}
__l2_vni_init()
{
local mac1=$1; shift
local mac2=$1; shift
local ip1=$1; shift
local ip2=$1; shift
local dst=$1; shift
bridge fdb add $mac1 dev vx10 self master extern_learn static \
dst $dst vlan 10
bridge fdb add $mac2 dev vx20 self master extern_learn static \
dst $dst vlan 20
ip neigh add $ip1 lladdr $mac1 nud noarp dev vlan10 \
extern_learn
ip neigh add $ip2 lladdr $mac2 nud noarp dev vlan20 \
extern_learn
}
export -f __l2_vni_init
l2_vni_init()
{
local h1_ns_mac=$(in_ns ns1 mac_get w2)
local h2_ns_mac=$(in_ns ns1 mac_get w4)
local h1_mac=$(mac_get $h1)
local h2_mac=$(mac_get $h2)
__l2_vni_init $h1_ns_mac $h2_ns_mac 10.1.1.102 10.1.2.102 10.0.0.2
in_ns ns1 __l2_vni_init $h1_mac $h2_mac 10.1.1.101 10.1.2.101 10.0.0.1
}
__l3_vni_init()
{
local mac=$1; shift
local vtep_ip=$1; shift
local host1_ip=$1; shift
local host2_ip=$1; shift
bridge fdb add $mac dev vx4001 self master extern_learn static \
dst $vtep_ip vlan 4001
ip neigh add $vtep_ip lladdr $mac nud noarp dev vlan4001 extern_learn
ip route add $host1_ip/32 vrf vrf-green nexthop via $vtep_ip \
dev vlan4001 onlink
ip route add $host2_ip/32 vrf vrf-green nexthop via $vtep_ip \
dev vlan4001 onlink
}
export -f __l3_vni_init
l3_vni_init()
{
local vlan4001_ns_mac=$(in_ns ns1 mac_get vlan4001)
local vlan4001_mac=$(mac_get vlan4001)
__l3_vni_init $vlan4001_ns_mac 10.0.0.2 10.1.1.102 10.1.2.102
in_ns ns1 __l3_vni_init $vlan4001_mac 10.0.0.1 10.1.1.101 10.1.2.101
}
setup_prepare()
{
h1=${NETIFS[p1]}
swp1=${NETIFS[p2]}
swp2=${NETIFS[p3]}
h2=${NETIFS[p4]}
rp1=${NETIFS[p5]}
rp2=${NETIFS[p6]}
vrf_prepare
forwarding_enable
h1_create
h2_create
switch_create
ip link add name v1 type veth peer name v2
spine_create
ns1_create
l2_vni_init
l3_vni_init
}
cleanup()
{
pre_cleanup
ns1_destroy
spine_destroy
ip link del dev v1
switch_destroy
h2_destroy
h1_destroy
forwarding_restore
vrf_cleanup
}
ping_ipv4()
{
ping_test $h1 10.1.2.101 ": local->local vid 10->vid 20"
ping_test $h1 10.1.1.102 ": local->remote vid 10->vid 10"
ping_test $h2 10.1.2.102 ": local->remote vid 20->vid 20"
ping_test $h1 10.1.2.102 ": local->remote vid 10->vid 20"
ping_test $h2 10.1.1.102 ": local->remote vid 20->vid 10"
}
trap cleanup EXIT
setup_prepare
setup_wait
tests_run
exit $EXIT_STATUS
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7