Commit aafda4e0 authored by Adrian Bunk's avatar Adrian Bunk Committed by Linus Torvalds

[PATCH] update OBSOLETE_OSS_DRIVER schedule and dependencies

Update the schedule for the removal of drivers depending on
OBSOLETE_OSS_DRIVER as follows:

- adjust OBSOLETE_OSS_DRIVER dependencie
- from the release of 2.6.16 till the release of 2.6.17:
  approx. two months for users to report problems with the ALSA
  drivers for the same hardware
- after the release of 2.6.17 (and before 2.6.18):
  remove the subset of drivers marked at OBSOLETE_OSS_DRIVER without
  known regressions in the ALSA drivers for the same hardware

Additionally, correct some OBSOLETE_OSS_DRIVER dependencies.
A rationale of the changes is in
  http://lkml.org/lkml/2006/1/28/135Signed-off-by: default avatarAdrian Bunk <bunk@stusta.de>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent bf104e64
......@@ -25,8 +25,9 @@ Who: Adrian Bunk <bunk@stusta.de>
---------------------------
What: drivers depending on OBSOLETE_OSS_DRIVER
When: January 2006
What: drivers that were depending on OBSOLETE_OSS_DRIVER
(config options already removed)
When: before 2.6.19
Why: OSS drivers with ALSA replacements
Who: Adrian Bunk <bunk@stusta.de>
......
......@@ -5,23 +5,9 @@
#
# Prompt user for primary drivers.
config OBSOLETE_OSS_DRIVER
bool "Obsolete OSS drivers"
depends on SOUND_PRIME
help
This option enables support for obsolete OSS drivers that
are scheduled for removal in the near future since there
are ALSA drivers for the same hardware.
Please contact Adrian Bunk <bunk@stusta.de> if you had to
say Y here because your soundcard is not properly supported
by ALSA.
If unsure, say N.
config SOUND_BT878
tristate "BT878 audio dma"
depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
depends on SOUND_PRIME && PCI
---help---
Audio DMA support for bt878 based grabber boards. As you might have
already noticed, bt878 is listed with two functions in /proc/pci.
......@@ -35,48 +21,9 @@ config SOUND_BT878
To compile this driver as a module, choose M here: the module will
be called btaudio.
config SOUND_CMPCI
tristate "C-Media PCI (CMI8338/8738)"
depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a PCI sound card using the CMI8338
or the CMI8738 chipset. Data on these chips are available at
<http://www.cmedia.com.tw/>.
A userspace utility to control some internal registers of these
chips is available at
<http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
config SOUND_CMPCI_FM
bool "Enable legacy FM"
depends on SOUND_CMPCI && X86
help
Say Y here to enable the legacy FM (frequency-modulation) synthesizer
support on a card using the CMI8338 or CMI8378 chipset. Even it is
enabled, you need to set fmio as proper value to enable it.
Say N here if you don't need this.
config SOUND_CMPCI_MIDI
bool "Enable legacy MPU-401"
depends on SOUND_CMPCI && X86
help
Say Y here to enable the legacy MPU401 MIDI synthesizer support on a
card using the CMI8338 or CMI8378 chipset. Even it is enabled,
you need to set mpuio as proper value to enable it.
Say N here if you don't need this.
config SOUND_CMPCI_JOYSTICK
bool "Enable joystick"
depends on SOUND_CMPCI && X86 && (GAMEPORT=y || SOUND_CMPCI=GAMEPORT)
help
Say Y here in order to enable the joystick port on a sound card using
the CMI8338 or the CMI8738 chipset. You need to config the
gameport support and set joystick parameter as 1 to use it.
Say N here if you don't need this.
config SOUND_EMU10K1
tristate "Creative SBLive! (EMU10K1)"
depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
depends on SOUND_PRIME && PCI
---help---
Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
such as the Creative SBLive!, SB PCI512 or Emu-APS.
......@@ -108,13 +55,6 @@ config SOUND_FUSION
series) when wired as native sound drivers with AC97 codecs. If
this driver does not work try the CS4232 driver.
config SOUND_CS4281
tristate "Crystal Sound CS4281"
depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Picture and feature list at
<http://www.pcbroker.com/crystal4281.html>.
config SOUND_BCM_CS4297A
tristate "Crystal Sound CS4297a (for Swarm)"
depends on SOUND_PRIME && SIBYTE_SWARM
......@@ -125,22 +65,9 @@ config SOUND_BCM_CS4297A
note that CONFIG_KGDB should not be enabled at the same
time, since it also attempts to use this UART port.
config SOUND_ES1370
tristate "Ensoniq AudioPCI (ES1370)"
depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a PCI sound card utilizing the Ensoniq
ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find
out if your sound card uses an ES1370 without removing your
computer's cover, use lspci -n and look for the PCI ID
1274:5000. Since Ensoniq was bought by Creative Labs,
Sound Blaster 64/PCI models are either ES1370 or ES1371 based.
This driver differs slightly from OSS/Free, so PLEASE READ
<file:Documentation/sound/oss/es1370>.
config SOUND_ES1371
tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
depends on SOUND_PRIME && PCI
help
Say Y or M if you have a PCI sound card utilizing the Ensoniq
ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
......@@ -151,33 +78,6 @@ config SOUND_ES1371
slightly from OSS/Free, so PLEASE READ
<file:Documentation/sound/oss/es1371>.
config SOUND_ESSSOLO1
tristate "ESS Technology Solo1"
depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a PCI sound card utilizing the ESS Technology
Solo1 chip. To find out if your sound card uses a
Solo1 chip without removing your computer's cover, use
lspci -n and look for the PCI ID 125D:1969. This driver
differs slightly from OSS/Free, so PLEASE READ
<file:Documentation/sound/oss/solo1>.
config SOUND_MAESTRO
tristate "ESS Maestro, Maestro2, Maestro2E driver"
depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a sound system driven by ESS's Maestro line
of PCI sound chips. These include the Maestro 1, Maestro 2, and
Maestro 2E. See <file:Documentation/sound/oss/Maestro> for more
details.
config SOUND_MAESTRO3
tristate "ESS Maestro3/Allegro driver (EXPERIMENTAL)"
depends on SOUND_PRIME && PCI && EXPERIMENTAL && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a sound system driven by ESS's Maestro 3
PCI sound chip.
config SOUND_ICH
tristate "Intel ICH (i8xx) audio support"
depends on SOUND_PRIME && PCI
......@@ -185,24 +85,6 @@ config SOUND_ICH
Support for integral audio in Intel's I/O Controller Hub (ICH)
chipset, as used on the 810/820/840 motherboards.
config SOUND_HARMONY
tristate "PA Harmony audio driver"
depends on GSC_LASI && SOUND_PRIME && OBSOLETE_OSS_DRIVER
help
Say 'Y' or 'M' to include support for Harmony soundchip
on HP 712, 715/new and many other GSC based machines.
config SOUND_SONICVIBES
tristate "S3 SonicVibes"
depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a PCI sound card utilizing the S3
SonicVibes chipset. To find out if your sound card uses a
SonicVibes chip without removing your computer's cover, use
lspci -n and look for the PCI ID 5333:CA00. This driver
differs slightly from OSS/Free, so PLEASE READ
<file:Documentation/sound/oss/sonicvibes>.
config SOUND_VWSND
tristate "SGI Visual Workstation Sound"
depends on SOUND_PRIME && X86_VISWS
......@@ -231,10 +113,6 @@ config SOUND_VRC5477
integrated, multi-function controller chip for MIPS CPUs. Works
with the AC97 codec.
config SOUND_AU1000
tristate "Au1000 Sound"
depends on SOUND_PRIME && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && OBSOLETE_OSS_DRIVER
config SOUND_AU1550_AC97
tristate "Au1550 AC97 Sound"
depends on SOUND_PRIME && SOC_AU1550
......@@ -505,26 +383,6 @@ config MSND_FIFOSIZE
and Pinnacle). Larger values reduce the chance of data overruns at
the expense of overall latency. If unsure, use the default.
config SOUND_VIA82CXXX
tristate "VIA 82C686 Audio Codec"
depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y here to include support for the audio codec found on VIA
82Cxxx-based chips. Typically these are built into a motherboard.
DO NOT select Sound Blaster or Adlib with this driver, unless
you have a Sound Blaster or Adlib card in addition to your VIA
audio chip.
config MIDI_VIA82CXXX
bool "VIA 82C686 MIDI"
depends on SOUND_VIA82CXXX && ISA_DMA_API
help
Answer Y to use the MIDI interface of the Via686. You may need to
enable this in the BIOS before it will work. This is for connection
to external MIDI hardware, and is not required for software playback
of MIDI files.
config SOUND_OSS
tristate "OSS sound modules"
depends on SOUND_PRIME && ISA_DMA_API
......@@ -576,18 +434,6 @@ config SOUND_AD1889
Say M here if you have a sound card based on the Analog Devices
AD1889 chip.
config SOUND_SGALAXY
tristate "Aztech Sound Galaxy (non-PnP) cards"
depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
help
This module initializes the older non Plug and Play sound galaxy
cards from Aztech. It supports the Waverider Pro 32 - 3D and the
Galaxy Washington 16.
If you compile the driver into the kernel, you have to add
"sgalaxy=<io>,<irq>,<dma>,<dma2>,<sgbase>" to the kernel command
line.
config SOUND_ADLIB
tristate "Adlib Cards"
depends on SOUND_OSS
......@@ -612,56 +458,6 @@ config SOUND_ACI_MIXER
This driver is also available as a module and will be called aci.
config SOUND_CS4232
tristate "Crystal CS4232 based (PnP) cards"
depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
help
Say Y here if you have a card based on the Crystal CS4232 chip set,
which uses its own Plug and Play protocol.
If you compile the driver into the kernel, you have to add
"cs4232=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
command line.
See <file:Documentation/sound/oss/CS4232> for more information on
configuring this card.
config SOUND_SSCAPE
tristate "Ensoniq SoundScape support"
depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
help
Answer Y if you have a sound card based on the Ensoniq SoundScape
chipset. Such cards are being manufactured at least by Ensoniq, Spea
and Reveal (Reveal makes also other cards).
If you compile the driver into the kernel, you have to add
"sscape=<io>,<irq>,<dma>,<mpuio>,<mpuirq>" to the kernel command
line.
config SOUND_GUS
tristate "Gravis Ultrasound support"
depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
help
Say Y here for any type of Gravis Ultrasound card, including the GUS
or GUS MAX. See also <file:Documentation/sound/oss/ultrasound> for more
information on configuring this card with modules.
If you compile the driver into the kernel, you have to add
"gus=<io>,<irq>,<dma>,<dma2>" to the kernel command line.
config SOUND_GUS16
bool "16 bit sampling option of GUS (_NOT_ GUS MAX)"
depends on SOUND_GUS
help
Support for Gravis Ulstrasound (GUS) cards (other than the GUS),
sampling at 16-bit width.
config SOUND_GUSMAX
bool "GUS MAX support"
depends on SOUND_GUS
help
Support for Gravis Ulstrasound MAX.
config SOUND_VMIDI
tristate "Loopback MIDI device support"
depends on SOUND_OSS
......@@ -742,7 +538,7 @@ config SOUND_MPU401
config SOUND_NM256
tristate "NM256AV/NM256ZX audio support"
depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
depends on SOUND_OSS
help
Say M here to include audio support for the NeoMagic 256AV/256ZX
chipsets. These are the audio chipsets found in the Sony
......@@ -752,35 +548,6 @@ config SOUND_NM256
See <file:Documentation/sound/oss/NM256> for further information.
config SOUND_MAD16
tristate "OPTi MAD16 and/or Mozart based cards"
depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
---help---
Answer Y if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi
82C928 or 82C929 or 82C931) audio interface chip. These chips are
quite common so it's possible that many no-name cards have one of
them. In addition the MAD16 chip is used in some cards made by known
manufacturers such as Turtle Beach (Tropez), Reveal (some models)
and Diamond (latest ones). Note however that the Tropez sound cards
have their own driver; if you have one of those, say N here and Y or
M to "Full support for Turtle Beach WaveFront", below.
If you compile the driver into the kernel, you have to add
"mad16=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the
kernel command line.
See also <file:Documentation/sound/oss/Opti> and
<file:Documentation/sound/oss/MAD16> for more information on setting
these cards up as modules.
config MAD16_OLDCARD
bool "Support MIDI in older MAD16 based cards (requires SB)"
depends on SOUND_MAD16
help
Answer Y (or M) if you have an older card based on the C928 or
Mozart chipset and you want to have MIDI support. If you enable this
option you also need to enable support for Sound Blaster.
config SOUND_PAS
tristate "ProAudioSpectrum 16 support"
depends on SOUND_OSS
......@@ -873,53 +640,9 @@ config SOUND_SB
You can say M here to compile this driver as a module; the module is
called sb.
config SOUND_AWE32_SYNTH
tristate "AWE32 synth"
depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
help
Say Y here if you have a Sound Blaster SB32, AWE32-PnP, SB AWE64 or
similar sound card. See <file:Documentation/sound/oss/README.awe>,
<file:Documentation/sound/oss/AWE32> and the Soundblaster-AWE
mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
for more info.
config SOUND_WAVEFRONT
tristate "Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, Maui) synth/soundcards"
depends on SOUND_OSS && m && OBSOLETE_OSS_DRIVER
help
Answer Y or M if you have a Tropez Plus, Tropez or Maui sound card
and read the files <file:Documentation/sound/oss/Wavefront> and
<file:Documentation/sound/oss/Tropez+>.
config SOUND_MAUI
tristate "Limited support for Turtle Beach Wave Front (Maui, Tropez) synthesizers"
depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
help
Say Y here if you have a Turtle Beach Wave Front, Maui, or Tropez
sound card.
If you compile the driver into the kernel, you have to add
"maui=<io>,<irq>" to the kernel command line.
config MAUI_HAVE_BOOT
bool "Have OSWF.MOT firmware file"
depends on SOUND_MAUI=y && !STANDALONE
help
Turtle Beach Maui and Tropez sound cards have a microcontroller
which needs to be initialized prior to use. OSWF.MOT is a file
distributed with the card's DOS/Windows drivers. Answer Y if you
have this file.
config MAUI_BOOT_FILE
string "Full pathname of OSWF.MOT firmware file"
depends on MAUI_HAVE_BOOT
default "/etc/sound/oswf.mot"
help
Enter the full pathname of your OSWF.MOT file, starting from /.
config SOUND_YM3812
tristate "Yamaha FM synthesizer (YM3812/OPL-3) support"
depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
depends on SOUND_OSS
---help---
Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4).
Answering Y is usually a safe and recommended choice, however some
......@@ -933,18 +656,6 @@ config SOUND_YM3812
If unsure, say Y.
config SOUND_OPL3SA1
tristate "Yamaha OPL3-SA1 audio controller"
depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a Yamaha OPL3-SA1 sound chip, which is
usually built into motherboards. Read
<file:Documentation/sound/oss/OPL3-SA> for details.
If you compile the driver into the kernel, you have to add
"opl3sa=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
command line.
config SOUND_OPL3SA2
tristate "Yamaha OPL3-SA2 and SA3 based PnP cards"
depends on SOUND_OSS
......@@ -959,19 +670,6 @@ config SOUND_OPL3SA2
"opl3sa2=<io>,<irq>,<dma>,<dma2>,<mssio>,<mpuio>" to the kernel
command line.
config SOUND_YMFPCI
tristate "Yamaha YMF7xx PCI audio (native mode)"
depends on SOUND_OSS && PCI && OBSOLETE_OSS_DRIVER
help
Support for Yamaha cards including the YMF711, YMF715, YMF718,
YMF719, YMF724, Waveforce 192XG, and Waveforce 192 Digital.
config SOUND_YMFPCI_LEGACY
bool "Yamaha PCI legacy ports support"
depends on SOUND_YMFPCI
help
Support for YMF7xx PCI cards emulating an MP401.
config SOUND_UART6850
tristate "6850 UART support"
depends on SOUND_OSS
......@@ -1101,30 +799,6 @@ config SOUND_KAHLUA
tristate "XpressAudio Sound Blaster emulation"
depends on SOUND_SB
config SOUND_ALI5455
tristate "ALi5455 audio support"
depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
config SOUND_FORTE
tristate "ForteMedia FM801 driver"
depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y or M if you want driver support for the ForteMedia FM801 PCI
audio controller (Abit AU10, Genius Sound Maker, HP Workstation
zx2000, and others).
config SOUND_RME96XX
tristate "RME Hammerfall (RME96XX) support"
depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
help
Say Y or M if you have a Hammerfall or Hammerfall light
multichannel card from RME. If you want to access advanced
features of the card, read <file:Documentation/sound/oss/rme96xx>.
config SOUND_AD1980
tristate "AD1980 front/back switch plugin"
depends on SOUND_PRIME && OBSOLETE_OSS_DRIVER
config SOUND_SH_DAC_AUDIO
tristate "SuperH DAC audio support"
depends on SOUND_PRIME && CPU_SH3
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment