clk: mmp: add pxa168 DT support for clock driver

It adds the DT support for pxa168 clock subsystem.
Signed-off-by: Chao Xie <chao.xie@marvell.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>

Documentation/devicetree/bindings/clock/marvell,pxa168.txt

+* Marvell PXA168 Clock Controller
+
+The PXA168 clock subsystem generates and supplies clock to various
+controllers within the PXA168 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "marvell,pxa168-clock" - controller compatible with PXA168 SoC.
+
+- reg: physical base address of the clock subsystem and length of memory mapped
+  region. There are 3 places in SOC has clock control logic:
+  "mpmu", "apmu", "apbc". So three reg spaces need to be defined.
+
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/marvell,pxa168.h>.

drivers/clk/mmp/Makefile

@@ -6,6 +6,8 @@ obj-y += clk-apbc.o clk-apmu.o clk-frac.o clk-mix.o clk-gate.o clk.o
 
 obj-$(CONFIG_RESET_CONTROLLER) += reset.o
 
+obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o
+
 obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
 obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
 obj-$(CONFIG_CPU_MMP2) += clk-mmp2.o

include/dt-bindings/clock/marvell,pxa168.h

+#ifndef __DTS_MARVELL_PXA168_CLOCK_H
+#define __DTS_MARVELL_PXA168_CLOCK_H
+
+/* fixed clocks and plls */
+#define PXA168_CLK_CLK32		1
+#define PXA168_CLK_VCTCXO		2
+#define PXA168_CLK_PLL1			3
+#define PXA168_CLK_PLL1_2		8
+#define PXA168_CLK_PLL1_4		9
+#define PXA168_CLK_PLL1_8		10
+#define PXA168_CLK_PLL1_16		11
+#define PXA168_CLK_PLL1_6		12
+#define PXA168_CLK_PLL1_12		13
+#define PXA168_CLK_PLL1_24		14
+#define PXA168_CLK_PLL1_48		15
+#define PXA168_CLK_PLL1_96		16
+#define PXA168_CLK_PLL1_13		17
+#define PXA168_CLK_PLL1_13_1_5		18
+#define PXA168_CLK_PLL1_2_1_5		19
+#define PXA168_CLK_PLL1_3_16		20
+#define PXA168_CLK_UART_PLL		27
+
+/* apb periphrals */
+#define PXA168_CLK_TWSI0		60
+#define PXA168_CLK_TWSI1		61
+#define PXA168_CLK_TWSI2		62
+#define PXA168_CLK_TWSI3		63
+#define PXA168_CLK_GPIO			64
+#define PXA168_CLK_KPC			65
+#define PXA168_CLK_RTC			66
+#define PXA168_CLK_PWM0			67
+#define PXA168_CLK_PWM1			68
+#define PXA168_CLK_PWM2			69
+#define PXA168_CLK_PWM3			70
+#define PXA168_CLK_UART0		71
+#define PXA168_CLK_UART1		72
+#define PXA168_CLK_UART2		73
+#define PXA168_CLK_SSP0			74
+#define PXA168_CLK_SSP1			75
+#define PXA168_CLK_SSP2			76
+#define PXA168_CLK_SSP3			77
+#define PXA168_CLK_SSP4			78
+
+/* axi periphrals */
+#define PXA168_CLK_DFC			100
+#define PXA168_CLK_SDH0			101
+#define PXA168_CLK_SDH1			102
+#define PXA168_CLK_SDH2			103
+#define PXA168_CLK_USB			104
+#define PXA168_CLK_SPH			105
+#define PXA168_CLK_DISP0		106
+#define PXA168_CLK_CCIC0		107
+#define PXA168_CLK_CCIC0_PHY		108
+#define PXA168_CLK_CCIC0_SPHY		109
+
+#define PXA168_NR_CLKS			200
+#endif