Skip to content

L
linux
Commit accdab6d authored by Olof Johansson's avatar Olof Johansson
Browse files
Options

Merge tag 'imx-soc-5.10' of... 

Merge tag 'imx-soc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc

i.MX SoC update for 5.10:

- A series from Fabio Estevam to remove legacy non-DT i.MX platforms
  support and related board files. This is a natural move, as the
  platforms had been converted to DT for years, and we have not seen
  any users around these legacy non-DT support for a while.
- Enable cpufreq support for i.MX7ULP platform.

* tag 'imx-soc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (26 commits)
  clk: imx: imx35: Remove mx35_clocks_init()
  clk: imx: imx31: Remove mx31_clocks_init()
  clk: imx: imx27: Remove mx27_clocks_init()
  ARM: imx: Remove unused definitions
  ARM: imx35: Retrieve the IIM base address from devicetree
  ARM: imx3: Retrieve the AVIC base address from devicetree
  ARM: imx3: Retrieve the CCM base address from devicetree
  ARM: imx31: Retrieve the IIM base address from devicetree
  ARM: imx27: Retrieve the CCM base address from devicetree
  ARM: imx27: Retrieve the SYSCTRL base address from devicetree
  ARM: imx: Remove remnant board file support pieces
  ARM: imx: Remove imx device directory
  ARM: imx: Remove iomux-v3 board code
  ARM: imx3: Remove imx3 soc_init()
  ARM: imx31: Remove remaining i.MX31 board code
  ARM: imx27: Retrieve AVIC base address from devicetree
  ARM: imx27: Get rid of mm-imx27.c
  ARM: imx27: Remove iomux-v1 board code
  ARM: imx27: Remove imx27_soc_init()
  ARM: imx7ulp: enable cpufreq
  ...

Link: https://lore.kernel.org/r/20200923073009.23678-2-shawnguo@kernel.orgSigned-off-by: default avatarOlof Johansson <olof@lixom.net>
parents a4f07008 fb956b3e
Show whitespace changes
Inline Side-by-side
Showing with 167 additions and 16212 deletions
arch/arm/configs/imx_v4_v5_defconfig
View file @ accdab6d
...@@ -20,9 +20,9 @@ CONFIG_MACH_MX27ADS=y ...@@ -20,9 +20,9 @@ CONFIG_MACH_MX27ADS=y
CONFIG_MACH_MX27_3DS=y CONFIG_MACH_MX27_3DS=y
CONFIG_MACH_IMX27_VISSTRIM_M10=y CONFIG_MACH_IMX27_VISSTRIM_M10=y
CONFIG_MACH_PCA100=y CONFIG_MACH_PCA100=y
CONFIG_MACH_IMX27_DT=y
CONFIG_SOC_IMX1=y CONFIG_SOC_IMX1=y
CONFIG_SOC_IMX25=y CONFIG_SOC_IMX25=y
CONFIG_SOC_IMX27=y
CONFIG_AEABI=y CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ZBOOT_ROM_BSS=0x0
......
arch/arm/configs/imx_v6_v7_defconfig
View file @ accdab6d
...@@ -15,20 +15,8 @@ CONFIG_PERF_EVENTS=y ...@@ -15,20 +15,8 @@ CONFIG_PERF_EVENTS=y
# CONFIG_COMPAT_BRK is not set # CONFIG_COMPAT_BRK is not set
CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_MULTI_V6=y
CONFIG_ARCH_MXC=y CONFIG_ARCH_MXC=y
CONFIG_MACH_MX31LILLY=y CONFIG_SOC_IMX31=y
CONFIG_MACH_MX31LITE=y CONFIG_SOC_IMX35=y
CONFIG_MACH_PCM037=y
CONFIG_MACH_PCM037_EET=y
CONFIG_MACH_MX31_3DS=y
CONFIG_MACH_MX31MOBOARD=y
CONFIG_MACH_QONG=y
CONFIG_MACH_ARMADILLO5X0=y
CONFIG_MACH_KZM_ARM11_01=y
CONFIG_MACH_IMX31_DT=y
CONFIG_MACH_IMX35_DT=y
CONFIG_MACH_PCM043=y
CONFIG_MACH_MX35_3DS=y
CONFIG_MACH_VPR200=y
CONFIG_SOC_IMX50=y CONFIG_SOC_IMX50=y
CONFIG_SOC_IMX51=y CONFIG_SOC_IMX51=y
CONFIG_SOC_IMX53=y CONFIG_SOC_IMX53=y
......
arch/arm/configs/multi_v5_defconfig
View file @ accdab6d
...@@ -29,8 +29,8 @@ CONFIG_MACH_MX27ADS=y ...@@ -29,8 +29,8 @@ CONFIG_MACH_MX27ADS=y
CONFIG_MACH_MX27_3DS=y CONFIG_MACH_MX27_3DS=y
CONFIG_MACH_IMX27_VISSTRIM_M10=y CONFIG_MACH_IMX27_VISSTRIM_M10=y
CONFIG_MACH_PCA100=y CONFIG_MACH_PCA100=y
CONFIG_MACH_IMX27_DT=y
CONFIG_SOC_IMX25=y CONFIG_SOC_IMX25=y
CONFIG_SOC_IMX27=y
CONFIG_ARCH_MVEBU=y CONFIG_ARCH_MVEBU=y
CONFIG_MACH_KIRKWOOD=y CONFIG_MACH_KIRKWOOD=y
CONFIG_ARCH_ORION5X=y CONFIG_ARCH_ORION5X=y
......
arch/arm/mach-imx/3ds_debugboard.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com>
*/
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/smsc911x.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include "3ds_debugboard.h"
#include "hardware.h"
/* LAN9217 ethernet base address */
#define LAN9217_BASE_ADDR(n) (n + 0x0)
/* External UART */
#define UARTA_BASE_ADDR(n) (n + 0x8000)
#define UARTB_BASE_ADDR(n) (n + 0x10000)
#define BOARD_IO_ADDR(n) (n + 0x20000)
/* LED switchs */
#define LED_SWITCH_REG 0x00
/* buttons */
#define SWITCH_BUTTONS_REG 0x08
/* status, interrupt */
#define INTR_STATUS_REG 0x10
#define INTR_MASK_REG 0x38
#define INTR_RESET_REG 0x20
/* magic word for debug CPLD */
#define MAGIC_NUMBER1_REG 0x40
#define MAGIC_NUMBER2_REG 0x48
/* CPLD code version */
#define CPLD_CODE_VER_REG 0x50
/* magic word for debug CPLD */
#define MAGIC_NUMBER3_REG 0x58
/* module reset register*/
#define MODULE_RESET_REG 0x60
/* CPU ID and Personality ID */
#define MCU_BOARD_ID_REG 0x68
#define MXC_MAX_EXP_IO_LINES 16
/* interrupts like external uart , external ethernet etc*/
#define EXPIO_INT_ENET 0
#define EXPIO_INT_XUART_A 1
#define EXPIO_INT_XUART_B 2
#define EXPIO_INT_BUTTON_A 3
#define EXPIO_INT_BUTTON_B 4
static void __iomem *brd_io;
static struct irq_domain *domain;
static struct resource smsc911x_resources[] = {
{
.flags = IORESOURCE_MEM,
} , {
.flags = IORESOURCE_IRQ,
},
};
static struct smsc911x_platform_config smsc911x_config = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
};
static struct platform_device smsc_lan9217_device = {
.name = "smsc911x",
.id = -1,
.dev = {
.platform_data = &smsc911x_config,
},
.num_resources = ARRAY_SIZE(smsc911x_resources),
.resource = smsc911x_resources,
};
static void mxc_expio_irq_handler(struct irq_desc *desc)
{
u32 imr_val;
u32 int_valid;
u32 expio_irq;
/* irq = gpio irq number */
desc->irq_data.chip->irq_mask(&desc->irq_data);
imr_val = imx_readw(brd_io + INTR_MASK_REG);
int_valid = imx_readw(brd_io + INTR_STATUS_REG) & ~imr_val;
expio_irq = 0;
for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
if ((int_valid & 1) == 0)
continue;
generic_handle_irq(irq_find_mapping(domain, expio_irq));
}
desc->irq_data.chip->irq_ack(&desc->irq_data);
desc->irq_data.chip->irq_unmask(&desc->irq_data);
}
/*
* Disable an expio pin's interrupt by setting the bit in the imr.
* Irq is an expio virtual irq number
*/
static void expio_mask_irq(struct irq_data *d)
{
u16 reg;
u32 expio = d->hwirq;
reg = imx_readw(brd_io + INTR_MASK_REG);
reg |= (1 << expio);
imx_writew(reg, brd_io + INTR_MASK_REG);
}
static void expio_ack_irq(struct irq_data *d)
{
u32 expio = d->hwirq;
imx_writew(1 << expio, brd_io + INTR_RESET_REG);
imx_writew(0, brd_io + INTR_RESET_REG);
expio_mask_irq(d);
}
static void expio_unmask_irq(struct irq_data *d)
{
u16 reg;
u32 expio = d->hwirq;
reg = imx_readw(brd_io + INTR_MASK_REG);
reg &= ~(1 << expio);
imx_writew(reg, brd_io + INTR_MASK_REG);
}
static struct irq_chip expio_irq_chip = {
.irq_ack = expio_ack_irq,
.irq_mask = expio_mask_irq,
.irq_unmask = expio_unmask_irq,
};
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
REGULATOR_SUPPLY("vddvario", "smsc911x"),
};
int __init mxc_expio_init(u32 base, u32 intr_gpio)
{
u32 p_irq = gpio_to_irq(intr_gpio);
int irq_base;
int i;
brd_io = ioremap(BOARD_IO_ADDR(base), SZ_4K);
if (brd_io == NULL)
return -ENOMEM;
if ((imx_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) ||
(imx_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) ||
(imx_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) {
pr_info("3-Stack Debug board not detected\n");
iounmap(brd_io);
brd_io = NULL;
return -ENODEV;
}
pr_info("3-Stack Debug board detected, rev = 0x%04X\n",
readw(brd_io + CPLD_CODE_VER_REG));
/*
* Configure INT line as GPIO input
*/
gpio_request(intr_gpio, "expio_pirq");
gpio_direction_input(intr_gpio);
/* disable the interrupt and clear the status */
imx_writew(0, brd_io + INTR_MASK_REG);
imx_writew(0xFFFF, brd_io + INTR_RESET_REG);
imx_writew(0, brd_io + INTR_RESET_REG);
imx_writew(0x1F, brd_io + INTR_MASK_REG);
irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id());
WARN_ON(irq_base < 0);
domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0,
&irq_domain_simple_ops, NULL);
WARN_ON(!domain);
for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) {
irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq);
irq_clear_status_flags(i, IRQ_NOREQUEST);
}
irq_set_irq_type(p_irq, IRQF_TRIGGER_LOW);
irq_set_chained_handler(p_irq, mxc_expio_irq_handler);
/* Register Lan device on the debugboard */
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
smsc911x_resources[0].start = LAN9217_BASE_ADDR(base);
smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1;
smsc911x_resources[1].start = irq_find_mapping(domain, EXPIO_INT_ENET);
smsc911x_resources[1].end = irq_find_mapping(domain, EXPIO_INT_ENET);
platform_device_register(&smsc_lan9217_device);
return 0;
}
arch/arm/mach-imx/3ds_debugboard.h deleted 100644 → 0
View file @ a4f07008
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
*/
#ifndef __ASM_ARCH_MXC_3DS_DB_H__
#define __ASM_ARCH_MXC_3DS_DB_H__
extern int __init mxc_expio_init(u32 base, u32 intr_gpio);
#endif /* __ASM_ARCH_MXC_3DS_DB_H__ */
arch/arm/mach-imx/Kconfig
View file @ accdab6d
...@@ -47,371 +47,26 @@ config HAVE_IMX_SRC ...@@ -47,371 +47,26 @@ config HAVE_IMX_SRC
def_bool y if SMP def_bool y if SMP
select ARCH_HAS_RESET_CONTROLLER select ARCH_HAS_RESET_CONTROLLER
config IMX_HAVE_IOMUX_V1 if ARCH_MULTI_V6
bool
config ARCH_MXC_IOMUX_V3 comment "ARM1136 platforms"
bool
config SOC_IMX21
bool
select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
config SOC_IMX27
bool
select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
select PINCTRL_IMX27
config SOC_IMX31 config SOC_IMX31
bool bool "i.MX31 support"
select CPU_V6 select CPU_V6
select MXC_AVIC select MXC_AVIC
help
This enables support for Freescale i.MX31 processor
config SOC_IMX35 config SOC_IMX35
bool bool "i.MX35 support"
select ARCH_MXC_IOMUX_V3
select MXC_AVIC select MXC_AVIC
select PINCTRL_IMX35 select PINCTRL_IMX35
if ARCH_MULTI_V5
comment "MX21 platforms:"
config MACH_MX21ADS
bool "MX21ADS platform"
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select SOC_IMX21
help
Include support for MX21ADS platform. This includes specific
configurations for the board and its peripherals.
comment "MX27 platforms:"
config MACH_MX27ADS
bool "MX27ADS platform"
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
select SOC_IMX27
help
Include support for MX27ADS platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX27_3DS
bool "MX27PDK platform"
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MX2_CAMERA
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_DEBUG_BOARD
select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX27
help
Include support for MX27PDK platform. This includes specific
configurations for the board and its peripherals.
config MACH_IMX27_VISSTRIM_M10
bool "Vista Silicon i.MX27 Visstrim_m10"
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MX2_CAMERA
select IMX_HAVE_PLATFORM_MX2_EMMA
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select LEDS_GPIO_REGISTER
select SOC_IMX27
help
Include support for Visstrim_m10 platform and its different variants.
This includes specific configurations for the board and its
peripherals.
config MACH_PCA100
bool "Phytec phyCARD-s (pca100)"
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
select IMX_HAVE_PLATFORM_SPI_IMX
select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX27
help
Include support for phyCARD-s (aka pca100) platform. This
includes specific configurations for the module and its peripherals.
config MACH_IMX27_DT
bool "Support i.MX27 platforms from device tree"
select SOC_IMX27
help
Include support for Freescale i.MX27 based platforms
using the device tree for discovery
endif
if ARCH_MULTI_V6
comment "MX31 platforms:"
config MACH_MX31ADS
bool "Support MX31ADS platforms"
default y
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select SOC_IMX31
help
Include support for MX31ADS platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX31ADS_WM1133_EV1
bool "Support Wolfson Microelectronics 1133-EV1 module"
depends on MACH_MX31ADS
depends on MFD_WM8350_I2C
depends on REGULATOR_WM8350 = y
help help
Include support for the Wolfson Microelectronics 1133-EV1 PMU This enables support for Freescale i.MX31 processor
and audio module for the MX31ADS platform.
config MACH_MX31LILLY
bool "Support MX31 LILLY-1131 platforms (INCO startec)"
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX31
help
Include support for mx31 based LILLY1131 modules. This includes
specific configurations for the board and its peripherals.
config MACH_MX31LITE
bool "Support MX31 LITEKIT (LogicPD)"
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_RTC
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX31
help
Include support for MX31 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
config MACH_PCM037
bool "Support Phytec pcm037 (i.MX31) platforms"
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX31
help
Include support for Phytec pcm037 platform. This includes
specific configurations for the board and its peripherals.
config MACH_PCM037_EET
bool "Support pcm037 EET board extensions"
depends on MACH_PCM037
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_SPI_IMX
help
Add support for PCM037 EET baseboard extensions. If you are using the
OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
command-line parameter.
config MACH_MX31_3DS
bool "Support MX31PDK (3DS)"
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_DEBUG_BOARD
select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX31
help
Include support for MX31PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX31_3DS_MXC_NAND_USE_BBT
bool "Make the MXC NAND driver use the in flash Bad Block Table"
depends on MACH_MX31_3DS
depends on MTD_NAND_MXC
help
Enable this if you want that the MXC NAND driver uses the in flash
Bad Block Table to know what blocks are bad instead of scanning the
entire flash looking for bad block markers.
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX31
help
Include support for mx31moboard platform. This includes specific
configurations for the board and its peripherals.
config MACH_QONG
bool "Support Dave/DENX QongEVB-LITE platform"
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_UART
select SOC_IMX31
help
Include support for Dave/DENX QongEVB-LITE platform. This includes
specific configurations for the board and its peripherals.
config MACH_ARMADILLO5X0
bool "Support Atmark Armadillo-500 Development Base Board"
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX31
help
Include support for Atmark Armadillo-500 platform. This includes
specific configurations for the board and its peripherals.
config MACH_KZM_ARM11_01
bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
select IMX_HAVE_PLATFORM_IMX_UART
select SOC_IMX31
help
Include support for KZM-ARM11-01. This includes specific
configurations for the board and its peripherals.
config MACH_BUG
bool "Support Buglabs BUGBase platform"
default y
select IMX_HAVE_PLATFORM_IMX_UART
select SOC_IMX31
help
Include support for BUGBase 1.3 platform. This includes specific
configurations for the board and its peripherals.
config MACH_IMX31_DT
bool "Support i.MX31 platforms from device tree"
select SOC_IMX31
help
Include support for Freescale i.MX31 based platforms
using the device tree for discovery.
comment "MX35 platforms:"
config MACH_IMX35_DT
bool "Support i.MX35 platforms from device tree"
select SOC_IMX35
help
Include support for Freescale i.MX35 based platforms
using the device tree for discovery.
config MACH_PCM043
bool "Support Phytec pcm043 (i.MX35) platforms"
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX35
help
Include support for Phytec pcm043 platform. This includes
specific configurations for the board and its peripherals.
config MACH_MX35_3DS
bool "Support MX35PDK platform"
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_RTC
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select MXC_DEBUG_BOARD
select SOC_IMX35
help
Include support for MX35PDK platform. This includes specific
configurations for the board and its peripherals.
config MACH_VPR200
bool "Support VPR200 platform"
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select SOC_IMX35
help
Include support for VPR200 platform. This includes specific
configurations for the board and its peripherals.
endif endif
comment "Device tree only"
if ARCH_MULTI_V4T if ARCH_MULTI_V4T
config SOC_IMX1 config SOC_IMX1
...@@ -428,12 +83,20 @@ if ARCH_MULTI_V5 ...@@ -428,12 +83,20 @@ if ARCH_MULTI_V5
config SOC_IMX25 config SOC_IMX25
bool "i.MX25 support" bool "i.MX25 support"
select ARCH_MXC_IOMUX_V3
select CPU_ARM926T select CPU_ARM926T
select MXC_AVIC select MXC_AVIC
select PINCTRL_IMX25 select PINCTRL_IMX25
help help
This enables support for Freescale i.MX25 processor This enables support for Freescale i.MX25 processor
config SOC_IMX27
bool "i.MX27 support"
select CPU_ARM926T
select MXC_AVIC
select PINCTRL_IMX27
help
This enables support for Freescale i.MX27 processor
endif endif
if ARCH_MULTI_V7 if ARCH_MULTI_V7
...@@ -541,10 +204,10 @@ config SOC_LS1021A ...@@ -541,10 +204,10 @@ config SOC_LS1021A
endif endif
comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms"
if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M
comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms"
config SOC_IMX7D_CA7 config SOC_IMX7D_CA7
bool bool
select ARM_GIC select ARM_GIC
...@@ -607,6 +270,4 @@ endchoice ...@@ -607,6 +270,4 @@ endchoice
endif endif
source "arch/arm/mach-imx/devices/Kconfig"
endif endif
arch/arm/mach-imx/Makefile
View file @ accdab6d
# SPDX-License-Identifier: GPL-2.0 # SPDX-License-Identifier: GPL-2.0
obj-y := cpu.o system.o irq-common.o obj-y := cpu.o system.o irq-common.o
obj-$(CONFIG_SOC_IMX21) += mm-imx21.o
obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o
obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o mach-imx27.o
obj-$(CONFIG_SOC_IMX27) += mm-imx27.o ehci-imx27.o
obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o ehci-imx31.o obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o mach-imx31.o
obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o mach-imx35.o
imx5-pm-$(CONFIG_PM) += pm-imx5.o imx5-pm-$(CONFIG_PM) += pm-imx5.o
obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y) obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y)
obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_MXC_TZIC) += tzic.o obj-$(CONFIG_MXC_TZIC) += tzic.o
obj-$(CONFIG_MXC_AVIC) += avic.o obj-$(CONFIG_MXC_AVIC) += avic.o
...@@ -37,37 +31,6 @@ obj-y += ssi-fiq.o ...@@ -37,37 +31,6 @@ obj-y += ssi-fiq.o
obj-y += ssi-fiq-ksym.o obj-y += ssi-fiq-ksym.o
endif endif
# i.MX21 based machines
obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
# i.MX27 based machines
obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o
obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o
# i.MX31 based machines
obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o
obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o
obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o
obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o
obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o
obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o
obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \
mx31moboard-marxbot.o mx31moboard-smartbot.o
obj-$(CONFIG_MACH_QONG) += mach-qong.o
obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
obj-$(CONFIG_MACH_BUG) += mach-bug.o
obj-$(CONFIG_MACH_IMX31_DT) += imx31-dt.o
# i.MX35 based machines
obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
obj-$(CONFIG_MACH_IMX35_DT) += imx35-dt.o
obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
...@@ -105,5 +68,3 @@ obj-$(CONFIG_SOC_IMX53) += mach-imx53.o ...@@ -105,5 +68,3 @@ obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
obj-$(CONFIG_SOC_VF610) += mach-vf610.o obj-$(CONFIG_SOC_VF610) += mach-vf610.o
obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o
obj-y += devices/
arch/arm/mach-imx/board-mx31lilly.h deleted 100644 → 0
View file @ a4f07008
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
*
* Based on code for mobots boards,
* Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
*/
#ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
#define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
#ifndef __ASSEMBLY__
enum mx31lilly_boards {
MX31LILLY_NOBOARD = 0,
MX31LILLY_DB = 1,
};
/*
* This CPU module needs a baseboard to work. After basic initializing
* its own devices, it calls the baseboard's init function.
*/
extern void mx31lilly_db_init(void);
#endif
#endif /* __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ */
arch/arm/mach-imx/board-mx31lite.h deleted 100644 → 0
View file @ a4f07008
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
*
* Based on code for mobots boards,
* Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
*/
#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
#ifndef __ASSEMBLY__
enum mx31lite_boards {
MX31LITE_NOBOARD = 0,
MX31LITE_DB = 1,
};
/*
* This CPU module needs a baseboard to work. After basic initializing
* its own devices, it calls the baseboard's init function.
*/
extern void mx31lite_db_init(void);
#endif
#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
arch/arm/mach-imx/board-mx31moboard.h deleted 100644 → 0
View file @ a4f07008
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
*/
#ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
#define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
#ifndef __ASSEMBLY__
enum mx31moboard_boards {
MX31NOBOARD = 0,
MX31DEVBOARD = 1,
MX31MARXBOT = 2,
MX31SMARTBOT = 3,
MX31EYEBOT = 4,
};
/*
* This CPU module needs a baseboard to work. After basic initializing
* its own devices, it calls the baseboard's init function.
*/
extern void mx31moboard_devboard_init(void);
extern void mx31moboard_marxbot_init(void);
extern void mx31moboard_smartbot_init(int board);
#endif
#endif /* __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ */
arch/arm/mach-imx/common.h
View file @ accdab6d
...@@ -17,29 +17,14 @@ struct device_node; ...@@ -17,29 +17,14 @@ struct device_node;
enum mxc_cpu_pwr_mode; enum mxc_cpu_pwr_mode;
struct of_device_id; struct of_device_id;
void mx21_map_io(void);
void mx27_map_io(void);
void mx31_map_io(void); void mx31_map_io(void);
void mx35_map_io(void); void mx35_map_io(void);
void imx21_init_early(void); void imx21_init_early(void);
void imx27_init_early(void);
void imx31_init_early(void); void imx31_init_early(void);
void imx35_init_early(void); void imx35_init_early(void);
void mxc_init_irq(void __iomem *); void mxc_init_irq(void __iomem *);
void mx21_init_irq(void);
void mx27_init_irq(void);
void mx31_init_irq(void); void mx31_init_irq(void);
void mx35_init_irq(void); void mx35_init_irq(void);
void imx21_soc_init(void);
void imx27_soc_init(void);
void imx31_soc_init(void);
void imx35_soc_init(void);
int mx21_clocks_init(unsigned long lref, unsigned long fref);
int mx27_clocks_init(unsigned long fref);
int mx31_clocks_init(unsigned long fref);
int mx35_clocks_init(void);
struct platform_device *mxc_register_gpio(char *name, int id,
resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
void mxc_set_cpu_type(unsigned int type); void mxc_set_cpu_type(unsigned int type);
void mxc_restart(enum reboot_mode, const char *); void mxc_restart(enum reboot_mode, const char *);
void mxc_arch_reset_init(void __iomem *); void mxc_arch_reset_init(void __iomem *);
......
arch/arm/mach-imx/cpu-imx27.c
View file @ accdab6d
...@@ -9,6 +9,7 @@ ...@@ -9,6 +9,7 @@
*/ */
#include <linux/io.h> #include <linux/io.h>
#include <linux/of_address.h>
#include <linux/module.h> #include <linux/module.h>
#include "hardware.h" #include "hardware.h"
...@@ -17,16 +18,23 @@ static int mx27_cpu_rev = -1; ...@@ -17,16 +18,23 @@ static int mx27_cpu_rev = -1;
static int mx27_cpu_partnumber; static int mx27_cpu_partnumber;
#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */ #define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */
#define SYSCTRL_OFFSET 0x800 /* Offset from CCM base address */
static int mx27_read_cpu_rev(void) static int mx27_read_cpu_rev(void)
{ {
void __iomem *ccm_base;
struct device_node *np;
u32 val; u32 val;
np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm");
ccm_base = of_iomap(np, 0);
BUG_ON(!ccm_base);
/* /*
* now we have access to the IO registers. As we need * now we have access to the IO registers. As we need
* the silicon revision very early we read it here to * the silicon revision very early we read it here to
* avoid any further hooks * avoid any further hooks
*/ */
val = imx_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR + SYS_CHIP_ID)); val = imx_readl(ccm_base + SYSCTRL_OFFSET + SYS_CHIP_ID);
mx27_cpu_partnumber = (int)((val >> 12) & 0xFFFF); mx27_cpu_partnumber = (int)((val >> 12) & 0xFFFF);
......
arch/arm/mach-imx/cpu-imx31.c
View file @ accdab6d
...@@ -6,6 +6,7 @@ ...@@ -6,6 +6,7 @@
*/ */
#include <linux/module.h> #include <linux/module.h>
#include <linux/of_address.h>
#include <linux/io.h> #include <linux/io.h>
#include "common.h" #include "common.h"
...@@ -32,10 +33,16 @@ static struct { ...@@ -32,10 +33,16 @@ static struct {
static int mx31_read_cpu_rev(void) static int mx31_read_cpu_rev(void)
{ {
void __iomem *iim_base;
struct device_node *np;
u32 i, srev; u32 i, srev;
np = of_find_compatible_node(NULL, NULL, "fsl,imx31-iim");
iim_base = of_iomap(np, 0);
BUG_ON(!iim_base);
/* read SREV register from IIM module */ /* read SREV register from IIM module */
srev = imx_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV)); srev = imx_readl(iim_base + MXC_IIMSREV);
srev &= 0xff; srev &= 0xff;
for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++) for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
......
arch/arm/mach-imx/cpu-imx35.c
View file @ accdab6d
...@@ -5,6 +5,7 @@ ...@@ -5,6 +5,7 @@
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
*/ */
#include <linux/module.h> #include <linux/module.h>
#include <linux/of_address.h>
#include <linux/io.h> #include <linux/io.h>
#include "hardware.h" #include "hardware.h"
...@@ -14,9 +15,15 @@ static int mx35_cpu_rev = -1; ...@@ -14,9 +15,15 @@ static int mx35_cpu_rev = -1;
static int mx35_read_cpu_rev(void) static int mx35_read_cpu_rev(void)
{ {
void __iomem *iim_base;
struct device_node *np;
u32 rev; u32 rev;
rev = imx_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV)); np = of_find_compatible_node(NULL, NULL, "fsl,imx35-iim");
iim_base = of_iomap(np, 0);
BUG_ON(!iim_base);
rev = imx_readl(iim_base + MXC_IIMSREV);
switch (rev) { switch (rev) {
case 0x00: case 0x00:
return IMX_CHIP_REVISION_1_0; return IMX_CHIP_REVISION_1_0;
......
arch/arm/mach-imx/devices-imx21.h deleted 100644 → 0
View file @ a4f07008
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "devices/devices-common.h"
extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data;
#define imx21_add_imx21_hcd(pdata) \
imx_add_imx21_hcd(&imx21_imx21_hcd_data, pdata)
extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data;
#define imx21_add_imx2_wdt() \
imx_add_imx2_wdt(&imx21_imx2_wdt_data)
extern const struct imx_imx_fb_data imx21_imx_fb_data;
#define imx21_add_imx_fb(pdata) \
imx_add_imx_fb(&imx21_imx_fb_data, pdata)
extern const struct imx_imx_i2c_data imx21_imx_i2c_data;
#define imx21_add_imx_i2c(pdata) \
imx_add_imx_i2c(&imx21_imx_i2c_data, pdata)
extern const struct imx_imx_keypad_data imx21_imx_keypad_data;
#define imx21_add_imx_keypad(pdata) \
imx_add_imx_keypad(&imx21_imx_keypad_data, pdata)
extern const struct imx_imx_ssi_data imx21_imx_ssi_data[];
#define imx21_add_imx_ssi(id, pdata) \
imx_add_imx_ssi(&imx21_imx_ssi_data[id], pdata)
extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[];
#define imx21_add_imx_uart(id, pdata) \
imx_add_imx_uart_1irq(&imx21_imx_uart_data[id], pdata)
#define imx21_add_imx_uart0(pdata) imx21_add_imx_uart(0, pdata)
#define imx21_add_imx_uart1(pdata) imx21_add_imx_uart(1, pdata)
#define imx21_add_imx_uart2(pdata) imx21_add_imx_uart(2, pdata)
#define imx21_add_imx_uart3(pdata) imx21_add_imx_uart(3, pdata)
extern const struct imx_mxc_mmc_data imx21_mxc_mmc_data[];
#define imx21_add_mxc_mmc(id, pdata) \
imx_add_mxc_mmc(&imx21_mxc_mmc_data[id], pdata)
extern const struct imx_mxc_nand_data imx21_mxc_nand_data;
#define imx21_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx21_mxc_nand_data, pdata)
extern const struct imx_mxc_w1_data imx21_mxc_w1_data;
#define imx21_add_mxc_w1() \
imx_add_mxc_w1(&imx21_mxc_w1_data)
extern const struct imx_spi_imx_data imx21_cspi_data[];
#define imx21_add_cspi(id, pdata) \
imx_add_spi_imx(&imx21_cspi_data[id], pdata)
#define imx21_add_spi_imx0(pdata) imx21_add_cspi(0, pdata)
#define imx21_add_spi_imx1(pdata) imx21_add_cspi(1, pdata)
arch/arm/mach-imx/devices-imx27.h deleted 100644 → 0
View file @ a4f07008
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "devices/devices-common.h"
extern const struct imx_fec_data imx27_fec_data;
#define imx27_add_fec(pdata) \
imx_add_fec(&imx27_fec_data, pdata)
extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data;
#define imx27_add_fsl_usb2_udc(pdata) \
imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata)
extern const struct imx_imx27_coda_data imx27_coda_data;
#define imx27_add_coda() \
imx_add_imx27_coda(&imx27_coda_data)
extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data;
#define imx27_add_imx2_wdt() \
imx_add_imx2_wdt(&imx27_imx2_wdt_data)
extern const struct imx_imx_fb_data imx27_imx_fb_data;
#define imx27_add_imx_fb(pdata) \
imx_add_imx_fb(&imx27_imx_fb_data, pdata)
extern const struct imx_imx_i2c_data imx27_imx_i2c_data[];
#define imx27_add_imx_i2c(id, pdata) \
imx_add_imx_i2c(&imx27_imx_i2c_data[id], pdata)
extern const struct imx_imx_keypad_data imx27_imx_keypad_data;
#define imx27_add_imx_keypad(pdata) \
imx_add_imx_keypad(&imx27_imx_keypad_data, pdata)
extern const struct imx_imx_ssi_data imx27_imx_ssi_data[];
#define imx27_add_imx_ssi(id, pdata) \
imx_add_imx_ssi(&imx27_imx_ssi_data[id], pdata)
extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[];
#define imx27_add_imx_uart(id, pdata) \
imx_add_imx_uart_1irq(&imx27_imx_uart_data[id], pdata)
#define imx27_add_imx_uart0(pdata) imx27_add_imx_uart(0, pdata)
#define imx27_add_imx_uart1(pdata) imx27_add_imx_uart(1, pdata)
#define imx27_add_imx_uart2(pdata) imx27_add_imx_uart(2, pdata)
#define imx27_add_imx_uart3(pdata) imx27_add_imx_uart(3, pdata)
#define imx27_add_imx_uart4(pdata) imx27_add_imx_uart(4, pdata)
#define imx27_add_imx_uart5(pdata) imx27_add_imx_uart(5, pdata)
extern const struct imx_mx2_camera_data imx27_mx2_camera_data;
#define imx27_add_mx2_camera(pdata) \
imx_add_mx2_camera(&imx27_mx2_camera_data, pdata)
extern const struct imx_mx2_emma_data imx27_mx2_emmaprp_data;
#define imx27_add_mx2_emmaprp() \
imx_add_mx2_emmaprp(&imx27_mx2_emmaprp_data)
extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data;
#define imx27_add_mxc_ehci_otg(pdata) \
imx_add_mxc_ehci(&imx27_mxc_ehci_otg_data, pdata)
extern const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[];
#define imx27_add_mxc_ehci_hs(id, pdata) \
imx_add_mxc_ehci(&imx27_mxc_ehci_hs_data[id - 1], pdata)
extern const struct imx_mxc_mmc_data imx27_mxc_mmc_data[];
#define imx27_add_mxc_mmc(id, pdata) \
imx_add_mxc_mmc(&imx27_mxc_mmc_data[id], pdata)
extern const struct imx_mxc_nand_data imx27_mxc_nand_data;
#define imx27_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx27_mxc_nand_data, pdata)
extern const struct imx_mxc_w1_data imx27_mxc_w1_data;
#define imx27_add_mxc_w1() \
imx_add_mxc_w1(&imx27_mxc_w1_data)
extern const struct imx_spi_imx_data imx27_cspi_data[];
#define imx27_add_cspi(id, gtable) \
imx_add_spi_imx(&imx27_cspi_data[id], gtable)
#define imx27_add_spi_imx0(gtable) imx27_add_cspi(0, gtable)
#define imx27_add_spi_imx1(gtable) imx27_add_cspi(1, gtable)
#define imx27_add_spi_imx2(gtable) imx27_add_cspi(2, gtable)
extern const struct imx_pata_imx_data imx27_pata_imx_data;
#define imx27_add_pata_imx() \
imx_add_pata_imx(&imx27_pata_imx_data)
arch/arm/mach-imx/devices-imx31.h deleted 100644 → 0
View file @ a4f07008
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "devices/devices-common.h"
extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data;
#define imx31_add_fsl_usb2_udc(pdata) \
imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata)
extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data;
#define imx31_add_imx2_wdt() \
imx_add_imx2_wdt(&imx31_imx2_wdt_data)
extern const struct imx_imx_i2c_data imx31_imx_i2c_data[];
#define imx31_add_imx_i2c(id, pdata) \
imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata)
#define imx31_add_imx_i2c0(pdata) imx31_add_imx_i2c(0, pdata)
#define imx31_add_imx_i2c1(pdata) imx31_add_imx_i2c(1, pdata)
#define imx31_add_imx_i2c2(pdata) imx31_add_imx_i2c(2, pdata)
extern const struct imx_imx_keypad_data imx31_imx_keypad_data;
#define imx31_add_imx_keypad(pdata) \
imx_add_imx_keypad(&imx31_imx_keypad_data, pdata)
extern const struct imx_imx_ssi_data imx31_imx_ssi_data[];
#define imx31_add_imx_ssi(id, pdata) \
imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata)
extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[];
#define imx31_add_imx_uart(id, pdata) \
imx_add_imx_uart_1irq(&imx31_imx_uart_data[id], pdata)
#define imx31_add_imx_uart0(pdata) imx31_add_imx_uart(0, pdata)
#define imx31_add_imx_uart1(pdata) imx31_add_imx_uart(1, pdata)
#define imx31_add_imx_uart2(pdata) imx31_add_imx_uart(2, pdata)
#define imx31_add_imx_uart3(pdata) imx31_add_imx_uart(3, pdata)
#define imx31_add_imx_uart4(pdata) imx31_add_imx_uart(4, pdata)
extern const struct imx_ipu_core_data imx31_ipu_core_data;
#define imx31_add_ipu_core() \
imx_add_ipu_core(&imx31_ipu_core_data)
#define imx31_alloc_mx3_camera(pdata) \
imx_alloc_mx3_camera(&imx31_ipu_core_data, pdata)
#define imx31_add_mx3_sdc_fb(pdata) \
imx_add_mx3_sdc_fb(&imx31_ipu_core_data, pdata)
extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data;
#define imx31_add_mxc_ehci_otg(pdata) \
imx_add_mxc_ehci(&imx31_mxc_ehci_otg_data, pdata)
extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[];
#define imx31_add_mxc_ehci_hs(id, pdata) \
imx_add_mxc_ehci(&imx31_mxc_ehci_hs_data[id - 1], pdata)
extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[];
#define imx31_add_mxc_mmc(id, pdata) \
imx_add_mxc_mmc(&imx31_mxc_mmc_data[id], pdata)
extern const struct imx_mxc_nand_data imx31_mxc_nand_data;
#define imx31_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx31_mxc_nand_data, pdata)
extern const struct imx_mxc_rtc_data imx31_mxc_rtc_data;
#define imx31_add_mxc_rtc() \
imx_add_mxc_rtc(&imx31_mxc_rtc_data)
extern const struct imx_mxc_w1_data imx31_mxc_w1_data;
#define imx31_add_mxc_w1() \
imx_add_mxc_w1(&imx31_mxc_w1_data)
extern const struct imx_spi_imx_data imx31_cspi_data[];
#define imx31_add_cspi(id, gtable) \
imx_add_spi_imx(&imx31_cspi_data[id], gtable)
#define imx31_add_spi_imx0(gtable) imx31_add_cspi(0, gtable)
#define imx31_add_spi_imx1(gtable) imx31_add_cspi(1, gtable)
#define imx31_add_spi_imx2(gtable) imx31_add_cspi(2, gtable)
extern const struct imx_pata_imx_data imx31_pata_imx_data;
#define imx31_add_pata_imx() \
imx_add_pata_imx(&imx31_pata_imx_data)
arch/arm/mach-imx/devices-imx35.h deleted 100644 → 0
View file @ a4f07008
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "devices/devices-common.h"
extern const struct imx_fec_data imx35_fec_data;
#define imx35_add_fec(pdata) \
imx_add_fec(&imx35_fec_data, pdata)
extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data;
#define imx35_add_fsl_usb2_udc(pdata) \
imx_add_fsl_usb2_udc(&imx35_fsl_usb2_udc_data, pdata)
extern const struct imx_flexcan_data imx35_flexcan_data[];
#define imx35_add_flexcan(id) \
imx_add_flexcan(&imx35_flexcan_data[id])
#define imx35_add_flexcan0() imx35_add_flexcan(0)
#define imx35_add_flexcan1() imx35_add_flexcan(1)
extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data;
#define imx35_add_imx2_wdt() \
imx_add_imx2_wdt(&imx35_imx2_wdt_data)
extern const struct imx_imx_i2c_data imx35_imx_i2c_data[];
#define imx35_add_imx_i2c(id, pdata) \
imx_add_imx_i2c(&imx35_imx_i2c_data[id], pdata)
#define imx35_add_imx_i2c0(pdata) imx35_add_imx_i2c(0, pdata)
#define imx35_add_imx_i2c1(pdata) imx35_add_imx_i2c(1, pdata)
#define imx35_add_imx_i2c2(pdata) imx35_add_imx_i2c(2, pdata)
extern const struct imx_imx_keypad_data imx35_imx_keypad_data;
#define imx35_add_imx_keypad(pdata) \
imx_add_imx_keypad(&imx35_imx_keypad_data, pdata)
extern const struct imx_imx_ssi_data imx35_imx_ssi_data[];
#define imx35_add_imx_ssi(id, pdata) \
imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata)
extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[];
#define imx35_add_imx_uart(id, pdata) \
imx_add_imx_uart_1irq(&imx35_imx_uart_data[id], pdata)
#define imx35_add_imx_uart0(pdata) imx35_add_imx_uart(0, pdata)
#define imx35_add_imx_uart1(pdata) imx35_add_imx_uart(1, pdata)
#define imx35_add_imx_uart2(pdata) imx35_add_imx_uart(2, pdata)
extern const struct imx_ipu_core_data imx35_ipu_core_data;
#define imx35_add_ipu_core() \
imx_add_ipu_core(&imx35_ipu_core_data)
#define imx35_alloc_mx3_camera(pdata) \
imx_alloc_mx3_camera(&imx35_ipu_core_data, pdata)
#define imx35_add_mx3_sdc_fb(pdata) \
imx_add_mx3_sdc_fb(&imx35_ipu_core_data, pdata)
extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data;
#define imx35_add_mxc_ehci_otg(pdata) \
imx_add_mxc_ehci(&imx35_mxc_ehci_otg_data, pdata)
extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data;
#define imx35_add_mxc_ehci_hs(pdata) \
imx_add_mxc_ehci(&imx35_mxc_ehci_hs_data, pdata)
extern const struct imx_mxc_nand_data imx35_mxc_nand_data;
#define imx35_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx35_mxc_nand_data, pdata)
extern const struct imx_mxc_rtc_data imx35_mxc_rtc_data;
#define imx35_add_mxc_rtc() \
imx_add_mxc_rtc(&imx35_mxc_rtc_data)
extern const struct imx_mxc_w1_data imx35_mxc_w1_data;
#define imx35_add_mxc_w1() \
imx_add_mxc_w1(&imx35_mxc_w1_data)
extern const struct imx_sdhci_esdhc_imx_data imx35_sdhci_esdhc_imx_data[];
#define imx35_add_sdhci_esdhc_imx(id, pdata) \
imx_add_sdhci_esdhc_imx(&imx35_sdhci_esdhc_imx_data[id], pdata)
extern const struct imx_spi_imx_data imx35_cspi_data[];
#define imx35_add_cspi(id, pdata) \
imx_add_spi_imx(&imx35_cspi_data[id], pdata)
#define imx35_add_spi_imx0(pdata) imx35_add_cspi(0, pdata)
#define imx35_add_spi_imx1(pdata) imx35_add_cspi(1, pdata)
extern const struct imx_pata_imx_data imx35_pata_imx_data;
#define imx35_add_pata_imx() \
imx_add_pata_imx(&imx35_pata_imx_data)
arch/arm/mach-imx/devices/Kconfig deleted 100644 → 0
View file @ a4f07008
# SPDX-License-Identifier: GPL-2.0-only
config IMX_HAVE_PLATFORM_FEC
bool
default y if SOC_IMX25 || SOC_IMX27 || SOC_IMX35
config IMX_HAVE_PLATFORM_FLEXCAN
bool
config IMX_HAVE_PLATFORM_FSL_USB2_UDC
bool
config IMX_HAVE_PLATFORM_GPIO_KEYS
bool
config IMX_HAVE_PLATFORM_IMX21_HCD
bool
config IMX_HAVE_PLATFORM_IMX27_CODA
bool
default y if SOC_IMX27
config IMX_HAVE_PLATFORM_IMX2_WDT
bool
config IMX_HAVE_PLATFORM_IMX_FB
bool
config IMX_HAVE_PLATFORM_IMX_I2C
bool
config IMX_HAVE_PLATFORM_IMX_KEYPAD
bool
config IMX_HAVE_PLATFORM_PATA_IMX
bool
config IMX_HAVE_PLATFORM_IMX_SSI
bool
config IMX_HAVE_PLATFORM_IMX_UART
bool
config IMX_HAVE_PLATFORM_IPU_CORE
bool
config IMX_HAVE_PLATFORM_MX2_CAMERA
bool
config IMX_HAVE_PLATFORM_MX2_EMMA
bool
config IMX_HAVE_PLATFORM_MXC_EHCI
bool
config IMX_HAVE_PLATFORM_MXC_MMC
bool
config IMX_HAVE_PLATFORM_MXC_NAND
bool
config IMX_HAVE_PLATFORM_MXC_RTC
bool
config IMX_HAVE_PLATFORM_MXC_W1
bool
config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
bool
config IMX_HAVE_PLATFORM_SPI_IMX
bool
arch/arm/mach-imx/devices/Makefile deleted 100644 → 0
View file @ a4f07008
# SPDX-License-Identifier: GPL-2.0
obj-y := devices.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o
obj-y += platform-gpio-mxc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX27_CODA) += platform-imx27-coda.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o
obj-y += platform-imx-dma.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_FB) += platform-imx-fb.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_KEYPAD) += platform-imx-keypad.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_PATA_IMX) += platform-pata_imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IPU_CORE) += platform-ipu-core.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o
arch/arm/mach-imx/devices/devices-common.h deleted 100644 → 0
View file @ a4f07008
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2009-2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/gpio/machine.h>
#include <linux/platform_data/dma-imx-sdma.h>
extern struct device mxc_aips_bus;
extern struct device mxc_ahb_bus;
static inline struct platform_device *imx_add_platform_device_dmamask(
const char *name, int id,
const struct resource *res, unsigned int num_resources,
const void *data, size_t size_data, u64 dmamask)
{
struct platform_device_info pdevinfo = {
.name = name,
.id = id,
.res = res,
.num_res = num_resources,
.data = data,
.size_data = size_data,
.dma_mask = dmamask,
};
return platform_device_register_full(&pdevinfo);
}
static inline struct platform_device *imx_add_platform_device(
const char *name, int id,
const struct resource *res, unsigned int num_resources,
const void *data, size_t size_data)
{
return imx_add_platform_device_dmamask(
name, id, res, num_resources, data, size_data, 0);
}
#include <linux/fec.h>
struct imx_fec_data {
const char *devid;
resource_size_t iobase;
resource_size_t irq;
};
struct platform_device *__init imx_add_fec(
const struct imx_fec_data *data,
const struct fec_platform_data *pdata);
struct imx_flexcan_data {
int id;
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
};
struct platform_device *__init imx_add_flexcan(
const struct imx_flexcan_data *data);
#include <linux/fsl_devices.h>
struct imx_fsl_usb2_udc_data {
const char *devid;
resource_size_t iobase;
resource_size_t irq;
};
struct platform_device *__init imx_add_fsl_usb2_udc(
const struct imx_fsl_usb2_udc_data *data,
const struct fsl_usb2_platform_data *pdata);
#include <linux/gpio_keys.h>
struct platform_device *__init imx_add_gpio_keys(
const struct gpio_keys_platform_data *pdata);
#include <linux/platform_data/usb-mx2.h>
struct imx_imx21_hcd_data {
resource_size_t iobase;
resource_size_t irq;
};
struct platform_device *__init imx_add_imx21_hcd(
const struct imx_imx21_hcd_data *data,
const struct mx21_usbh_platform_data *pdata);
struct imx_imx27_coda_data {
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
};
struct platform_device *__init imx_add_imx27_coda(
const struct imx_imx27_coda_data *data);
struct imx_imx2_wdt_data {
int id;
resource_size_t iobase;
resource_size_t iosize;
};
struct platform_device *__init imx_add_imx2_wdt(
const struct imx_imx2_wdt_data *data);
struct imx_imxdi_rtc_data {
resource_size_t iobase;
resource_size_t irq;
};
struct platform_device *__init imx_add_imxdi_rtc(
const struct imx_imxdi_rtc_data *data);
#include <linux/platform_data/video-imxfb.h>
struct imx_imx_fb_data {
const char *devid;
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
};
struct platform_device *__init imx_add_imx_fb(
const struct imx_imx_fb_data *data,
const struct imx_fb_platform_data *pdata);
#include <linux/platform_data/i2c-imx.h>
struct imx_imx_i2c_data {
const char *devid;
int id;
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
};
struct platform_device *__init imx_add_imx_i2c(
const struct imx_imx_i2c_data *data,
const struct imxi2c_platform_data *pdata);
#include <linux/input/matrix_keypad.h>
struct imx_imx_keypad_data {
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
};
struct platform_device *__init imx_add_imx_keypad(
const struct imx_imx_keypad_data *data,
const struct matrix_keymap_data *pdata);
#include <linux/platform_data/asoc-imx-ssi.h>
struct imx_imx_ssi_data {
int id;
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
resource_size_t dmatx0;
resource_size_t dmarx0;
resource_size_t dmatx1;
resource_size_t dmarx1;
};
struct platform_device *__init imx_add_imx_ssi(
const struct imx_imx_ssi_data *data,
const struct imx_ssi_platform_data *pdata);
#include <linux/platform_data/serial-imx.h>
struct imx_imx_uart_1irq_data {
int id;
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
};
struct platform_device *__init imx_add_imx_uart_1irq(
const struct imx_imx_uart_1irq_data *data,
const struct imxuart_platform_data *pdata);
#include <linux/platform_data/video-mx3fb.h>
#include <linux/platform_data/media/camera-mx3.h>
struct imx_ipu_core_data {
resource_size_t iobase;
resource_size_t synirq;
resource_size_t errirq;
};
struct platform_device *__init imx_add_ipu_core(
const struct imx_ipu_core_data *data);
struct platform_device *__init imx_alloc_mx3_camera(
const struct imx_ipu_core_data *data,
const struct mx3_camera_pdata *pdata);
struct platform_device *__init imx_add_mx3_sdc_fb(
const struct imx_ipu_core_data *data,
struct mx3fb_platform_data *pdata);
#include <linux/platform_data/media/camera-mx2.h>
struct imx_mx2_camera_data {
const char *devid;
resource_size_t iobasecsi;
resource_size_t iosizecsi;
resource_size_t irqcsi;
resource_size_t iobaseemmaprp;
resource_size_t iosizeemmaprp;
resource_size_t irqemmaprp;
};
struct platform_device *__init imx_add_mx2_camera(
const struct imx_mx2_camera_data *data,
const struct mx2_camera_platform_data *pdata);
struct imx_mx2_emma_data {
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
};
struct platform_device *__init imx_add_mx2_emmaprp(
const struct imx_mx2_emma_data *data);
#include <linux/platform_data/usb-ehci-mxc.h>
struct imx_mxc_ehci_data {
int id;
resource_size_t iobase;
resource_size_t irq;
};
struct platform_device *__init imx_add_mxc_ehci(
const struct imx_mxc_ehci_data *data,
const struct mxc_usbh_platform_data *pdata);
#include <linux/platform_data/mmc-mxcmmc.h>
struct imx_mxc_mmc_data {
const char *devid;
int id;
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
resource_size_t dmareq;
};
struct platform_device *__init imx_add_mxc_mmc(
const struct imx_mxc_mmc_data *data,
const struct imxmmc_platform_data *pdata);
#include <linux/platform_data/mtd-mxc_nand.h>
struct imx_mxc_nand_data {
const char *devid;
/*
* id is traditionally 0, but -1 is more appropriate. We use -1 for new
* machines but don't change existing devices as the nand device usually
* appears in the kernel command line to pass its partitioning.
*/
int id;
resource_size_t iobase;
resource_size_t iosize;
resource_size_t axibase;
resource_size_t irq;
};
struct platform_device *__init imx_add_mxc_nand(
const struct imx_mxc_nand_data *data,
const struct mxc_nand_platform_data *pdata);
struct imx_pata_imx_data {
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
};
struct platform_device *__init imx_add_pata_imx(
const struct imx_pata_imx_data *data);
/* mxc_rtc */
struct imx_mxc_rtc_data {
const char *devid;
resource_size_t iobase;
resource_size_t irq;
};
struct platform_device *__init imx_add_mxc_rtc(
const struct imx_mxc_rtc_data *data);
/* mxc_w1 */
struct imx_mxc_w1_data {
resource_size_t iobase;
};
struct platform_device *__init imx_add_mxc_w1(
const struct imx_mxc_w1_data *data);
#include <linux/platform_data/mmc-esdhc-imx.h>
struct imx_sdhci_esdhc_imx_data {
const char *devid;
int id;
resource_size_t iobase;
resource_size_t irq;
};
struct platform_device *__init imx_add_sdhci_esdhc_imx(
const struct imx_sdhci_esdhc_imx_data *data,
const struct esdhc_platform_data *pdata);
struct imx_spi_imx_data {
const char *devid;
int id;
resource_size_t iobase;
resource_size_t iosize;
int irq;
};
struct platform_device *__init imx_add_spi_imx(
const struct imx_spi_imx_data *data, struct gpiod_lookup_table *gtable);
struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase,
int irq);
struct platform_device *imx_add_imx_sdma(char *name,
resource_size_t iobase, int irq, struct sdma_platform_data *pdata);
arch/arm/mach-imx/devices/devices.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2008 Sascha Hauer, kernel@pengutronix.de
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include "../common.h"
#include "devices-common.h"
struct device mxc_aips_bus = {
.init_name = "mxc_aips",
};
struct device mxc_ahb_bus = {
.init_name = "mxc_ahb",
};
int __init mxc_device_init(void)
{
int ret;
ret = device_register(&mxc_aips_bus);
if (ret < 0)
goto done;
ret = device_register(&mxc_ahb_bus);
done:
return ret;
}
arch/arm/mach-imx/devices/platform-fec.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include <linux/dma-mapping.h>
#include <linux/sizes.h>
#include "../hardware.h"
#include "devices-common.h"
#define imx_fec_data_entry_single(soc, _devid) \
{ \
.devid = _devid, \
.iobase = soc ## _FEC_BASE_ADDR, \
.irq = soc ## _INT_FEC, \
}
#ifdef CONFIG_SOC_IMX27
const struct imx_fec_data imx27_fec_data __initconst =
imx_fec_data_entry_single(MX27, "imx27-fec");
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX35
/* i.mx35 has the i.mx27 type fec */
const struct imx_fec_data imx35_fec_data __initconst =
imx_fec_data_entry_single(MX35, "imx27-fec");
#endif
struct platform_device *__init imx_add_fec(
const struct imx_fec_data *data,
const struct fec_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device_dmamask(data->devid, 0,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
arch/arm/mach-imx/devices/platform-flexcan.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de>
*/
#include "../hardware.h"
#include "devices-common.h"
#define imx_flexcan_data_entry_single(soc, _id, _hwid, _size) \
{ \
.id = _id, \
.iobase = soc ## _CAN ## _hwid ## _BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_CAN ## _hwid, \
}
#define imx_flexcan_data_entry(soc, _id, _hwid, _size) \
[_id] = imx_flexcan_data_entry_single(soc, _id, _hwid, _size)
#ifdef CONFIG_SOC_IMX35
const struct imx_flexcan_data imx35_flexcan_data[] __initconst = {
#define imx35_flexcan_data_entry(_id, _hwid) \
imx_flexcan_data_entry(MX35, _id, _hwid, SZ_16K)
imx35_flexcan_data_entry(0, 1),
imx35_flexcan_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_flexcan(
const struct imx_flexcan_data *data)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device("flexcan", data->id,
res, ARRAY_SIZE(res), NULL, 0);
}
arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include <linux/dma-mapping.h>
#include "../hardware.h"
#include "devices-common.h"
#define imx_fsl_usb2_udc_data_entry_single(soc, _devid) \
{ \
.devid = _devid, \
.iobase = soc ## _USB_OTG_BASE_ADDR, \
.irq = soc ## _INT_USB_OTG, \
}
#ifdef CONFIG_SOC_IMX27
const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_fsl_usb2_udc(
const struct imx_fsl_usb2_udc_data *data,
const struct fsl_usb2_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_512 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device_dmamask(data->devid, -1,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
arch/arm/mach-imx/devices/platform-gpio-mxc.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2011 Linaro Limited
*/
#include "devices-common.h"
#include "../common.h"
struct platform_device *__init mxc_register_gpio(char *name, int id,
resource_size_t iobase, resource_size_t iosize, int irq, int irq_high)
{
struct resource res[] = {
{
.start = iobase,
.end = iobase + iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = irq,
.end = irq,
.flags = IORESOURCE_IRQ,
}, {
.start = irq_high,
.end = irq_high,
.flags = IORESOURCE_IRQ,
},
};
unsigned int nres;
nres = irq_high ? ARRAY_SIZE(res) : ARRAY_SIZE(res) - 1;
return platform_device_register_resndata(&mxc_aips_bus, name, id, res, nres, NULL, 0);
}
arch/arm/mach-imx/devices/platform-gpio_keys.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
*/
#include <linux/sizes.h>
#include "../hardware.h"
#include "devices-common.h"
struct platform_device *__init imx_add_gpio_keys(
const struct gpio_keys_platform_data *pdata)
{
return imx_add_platform_device("gpio-keys", -1, NULL,
0, pdata, sizeof(*pdata));
}
arch/arm/mach-imx/devices/platform-imx-dma.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "devices-common.h"
struct platform_device __init __maybe_unused *imx_add_imx_dma(char *name,
resource_size_t iobase, int irq)
{
struct resource res[] = {
{
.start = iobase,
.end = iobase + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = irq,
.end = irq,
.flags = IORESOURCE_IRQ,
},
};
return platform_device_register_resndata(&mxc_ahb_bus,
name, -1, res, ARRAY_SIZE(res), NULL, 0);
}
struct platform_device __init __maybe_unused *imx_add_imx_sdma(char *name,
resource_size_t iobase, int irq, struct sdma_platform_data *pdata)
{
struct resource res[] = {
{
.start = iobase,
.end = iobase + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = irq,
.end = irq,
.flags = IORESOURCE_IRQ,
},
};
return platform_device_register_resndata(&mxc_ahb_bus, name,
-1, res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
}
arch/arm/mach-imx/devices/platform-imx-fb.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include <linux/dma-mapping.h>
#include "../hardware.h"
#include "devices-common.h"
#define imx_imx_fb_data_entry_single(soc, _devid, _size) \
{ \
.devid = _devid, \
.iobase = soc ## _LCDC_BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_LCDC, \
}
#ifdef CONFIG_SOC_IMX21
const struct imx_imx_fb_data imx21_imx_fb_data __initconst =
imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_fb_data imx27_imx_fb_data __initconst =
imx_imx_fb_data_entry_single(MX27, "imx21-fb", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX27 */
struct platform_device *__init imx_add_imx_fb(
const struct imx_imx_fb_data *data,
const struct imx_fb_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device_dmamask(data->devid, 0,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
arch/arm/mach-imx/devices/platform-imx-i2c.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2009-2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "../hardware.h"
#include "devices-common.h"
#define imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size) \
{ \
.devid = _devid, \
.id = _id, \
.iobase = soc ## _I2C ## _hwid ## _BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_I2C ## _hwid, \
}
#define imx_imx_i2c_data_entry(soc, _devid, _id, _hwid, _size) \
[_id] = imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size)
#ifdef CONFIG_SOC_IMX21
const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst =
imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = {
#define imx27_imx_i2c_data_entry(_id, _hwid) \
imx_imx_i2c_data_entry(MX27, "imx21-i2c", _id, _hwid, SZ_4K)
imx27_imx_i2c_data_entry(0, 1),
imx27_imx_i2c_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = {
#define imx31_imx_i2c_data_entry(_id, _hwid) \
imx_imx_i2c_data_entry(MX31, "imx21-i2c", _id, _hwid, SZ_4K)
imx31_imx_i2c_data_entry(0, 1),
imx31_imx_i2c_data_entry(1, 2),
imx31_imx_i2c_data_entry(2, 3),
};
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = {
#define imx35_imx_i2c_data_entry(_id, _hwid) \
imx_imx_i2c_data_entry(MX35, "imx21-i2c", _id, _hwid, SZ_4K)
imx35_imx_i2c_data_entry(0, 1),
imx35_imx_i2c_data_entry(1, 2),
imx35_imx_i2c_data_entry(2, 3),
};
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_imx_i2c(
const struct imx_imx_i2c_data *data,
const struct imxi2c_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device(data->devid, data->id,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata));
}
arch/arm/mach-imx/devices/platform-imx-keypad.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "../hardware.h"
#include "devices-common.h"
#define imx_imx_keypad_data_entry_single(soc, _size) \
{ \
.iobase = soc ## _KPP_BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_KPP, \
}
#ifdef CONFIG_SOC_IMX21
const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst =
imx_imx_keypad_data_entry_single(MX21, SZ_16);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst =
imx_imx_keypad_data_entry_single(MX27, SZ_16);
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_imx_keypad_data imx31_imx_keypad_data __initconst =
imx_imx_keypad_data_entry_single(MX31, SZ_16);
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst =
imx_imx_keypad_data_entry_single(MX35, SZ_16);
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_imx_keypad(
const struct imx_imx_keypad_data *data,
const struct matrix_keymap_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device("imx-keypad", -1,
res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
}
arch/arm/mach-imx/devices/platform-imx-ssi.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "../hardware.h"
#include "devices-common.h"
#define imx_imx_ssi_data_entry(soc, _id, _hwid, _size) \
[_id] = { \
.id = _id, \
.iobase = soc ## _SSI ## _hwid ## _BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_SSI ## _hwid, \
.dmatx0 = soc ## _DMA_REQ_SSI ## _hwid ## _TX0, \
.dmarx0 = soc ## _DMA_REQ_SSI ## _hwid ## _RX0, \
.dmatx1 = soc ## _DMA_REQ_SSI ## _hwid ## _TX1, \
.dmarx1 = soc ## _DMA_REQ_SSI ## _hwid ## _RX1, \
}
#ifdef CONFIG_SOC_IMX21
const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst = {
#define imx21_imx_ssi_data_entry(_id, _hwid) \
imx_imx_ssi_data_entry(MX21, _id, _hwid, SZ_4K)
imx21_imx_ssi_data_entry(0, 1),
imx21_imx_ssi_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = {
#define imx27_imx_ssi_data_entry(_id, _hwid) \
imx_imx_ssi_data_entry(MX27, _id, _hwid, SZ_4K)
imx27_imx_ssi_data_entry(0, 1),
imx27_imx_ssi_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst = {
#define imx31_imx_ssi_data_entry(_id, _hwid) \
imx_imx_ssi_data_entry(MX31, _id, _hwid, SZ_4K)
imx31_imx_ssi_data_entry(0, 1),
imx31_imx_ssi_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = {
#define imx35_imx_ssi_data_entry(_id, _hwid) \
imx_imx_ssi_data_entry(MX35, _id, _hwid, SZ_4K)
imx35_imx_ssi_data_entry(0, 1),
imx35_imx_ssi_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_imx_ssi(
const struct imx_imx_ssi_data *data,
const struct imx_ssi_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
#define DMARES(_name) { \
.name = #_name, \
.start = data->dma ## _name, \
.end = data->dma ## _name, \
.flags = IORESOURCE_DMA, \
}
DMARES(tx0),
DMARES(rx0),
DMARES(tx1),
DMARES(rx1),
};
return imx_add_platform_device("imx-ssi", data->id,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata));
}
arch/arm/mach-imx/devices/platform-imx-uart.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2009-2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "../hardware.h"
#include "devices-common.h"
#define imx_imx_uart_3irq_data_entry(soc, _id, _hwid, _size) \
[_id] = { \
.id = _id, \
.iobase = soc ## _UART ## _hwid ## _BASE_ADDR, \
.iosize = _size, \
.irqrx = soc ## _INT_UART ## _hwid ## RX, \
.irqtx = soc ## _INT_UART ## _hwid ## TX, \
.irqrts = soc ## _INT_UART ## _hwid ## RTS, \
}
#define imx_imx_uart_1irq_data_entry(soc, _id, _hwid, _size) \
[_id] = { \
.id = _id, \
.iobase = soc ## _UART ## _hwid ## _BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_UART ## _hwid, \
}
#ifdef CONFIG_SOC_IMX21
const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = {
#define imx21_imx_uart_data_entry(_id, _hwid) \
imx_imx_uart_1irq_data_entry(MX21, _id, _hwid, SZ_4K)
imx21_imx_uart_data_entry(0, 1),
imx21_imx_uart_data_entry(1, 2),
imx21_imx_uart_data_entry(2, 3),
imx21_imx_uart_data_entry(3, 4),
};
#endif
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = {
#define imx27_imx_uart_data_entry(_id, _hwid) \
imx_imx_uart_1irq_data_entry(MX27, _id, _hwid, SZ_4K)
imx27_imx_uart_data_entry(0, 1),
imx27_imx_uart_data_entry(1, 2),
imx27_imx_uart_data_entry(2, 3),
imx27_imx_uart_data_entry(3, 4),
imx27_imx_uart_data_entry(4, 5),
imx27_imx_uart_data_entry(5, 6),
};
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = {
#define imx31_imx_uart_data_entry(_id, _hwid) \
imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_4K)
imx31_imx_uart_data_entry(0, 1),
imx31_imx_uart_data_entry(1, 2),
imx31_imx_uart_data_entry(2, 3),
imx31_imx_uart_data_entry(3, 4),
imx31_imx_uart_data_entry(4, 5),
};
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
#define imx35_imx_uart_data_entry(_id, _hwid) \
imx_imx_uart_1irq_data_entry(MX35, _id, _hwid, SZ_16K)
imx35_imx_uart_data_entry(0, 1),
imx35_imx_uart_data_entry(1, 2),
imx35_imx_uart_data_entry(2, 3),
};
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_imx_uart_1irq(
const struct imx_imx_uart_1irq_data *data,
const struct imxuart_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
/* i.mx21 type uart runs on all i.mx except i.mx1 */
return imx_add_platform_device("imx21-uart", data->id,
res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
}
arch/arm/mach-imx/devices/platform-imx2-wdt.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include <linux/sizes.h>
#include "../hardware.h"
#include "devices-common.h"
#define imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size) \
{ \
.id = _id, \
.iobase = soc ## _WDOG ## _hwid ## _BASE_ADDR, \
.iosize = _size, \
}
#define imx_imx2_wdt_data_entry(soc, _id, _hwid, _size) \
[_id] = imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size)
#ifdef CONFIG_SOC_IMX21
const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst =
imx_imx2_wdt_data_entry_single(MX21, 0, , SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst =
imx_imx2_wdt_data_entry_single(MX27, 0, , SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_imx2_wdt_data imx31_imx2_wdt_data __initconst =
imx_imx2_wdt_data_entry_single(MX31, 0, , SZ_16K);
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_imx2_wdt_data imx35_imx2_wdt_data __initconst =
imx_imx2_wdt_data_entry_single(MX35, 0, , SZ_16K);
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_imx2_wdt(
const struct imx_imx2_wdt_data *data)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
},
};
return imx_add_platform_device("imx2-wdt", data->id,
res, ARRAY_SIZE(res), NULL, 0);
}
arch/arm/mach-imx/devices/platform-imx21-hcd.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "../hardware.h"
#include "devices-common.h"
#define imx_imx21_hcd_data_entry_single(soc) \
{ \
.iobase = soc ## _USBOTG_BASE_ADDR, \
.irq = soc ## _INT_USBHOST, \
}
#ifdef CONFIG_SOC_IMX21
const struct imx_imx21_hcd_data imx21_imx21_hcd_data __initconst =
imx_imx21_hcd_data_entry_single(MX21);
#endif /* ifdef CONFIG_SOC_IMX21 */
struct platform_device *__init imx_add_imx21_hcd(
const struct imx_imx21_hcd_data *data,
const struct mx21_usbh_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_8K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device_dmamask("imx21-hcd", 0,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
arch/arm/mach-imx/devices/platform-imx27-coda.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2012 Vista Silicon
* Javier Martin <javier.martin@vista-silicon.com>
*/
#include "../hardware.h"
#include "devices-common.h"
#ifdef CONFIG_SOC_IMX27
const struct imx_imx27_coda_data imx27_coda_data __initconst = {
.iobase = MX27_VPU_BASE_ADDR,
.iosize = SZ_512,
.irq = MX27_INT_VPU,
};
#endif
struct platform_device *__init imx_add_imx27_coda(
const struct imx_imx27_coda_data *data)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device_dmamask("coda-imx27", 0, res, 2, NULL,
0, DMA_BIT_MASK(32));
}
arch/arm/mach-imx/devices/platform-ipu-core.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2011 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include <linux/dma-mapping.h>
#include "../hardware.h"
#include "devices-common.h"
#define imx_ipu_core_entry_single(soc) \
{ \
.iobase = soc ## _IPU_CTRL_BASE_ADDR, \
.synirq = soc ## _INT_IPU_SYN, \
.errirq = soc ## _INT_IPU_ERR, \
}
#ifdef CONFIG_SOC_IMX31
const struct imx_ipu_core_data imx31_ipu_core_data __initconst =
imx_ipu_core_entry_single(MX31);
#endif
#ifdef CONFIG_SOC_IMX35
const struct imx_ipu_core_data imx35_ipu_core_data __initconst =
imx_ipu_core_entry_single(MX35);
#endif
static struct platform_device *imx_ipu_coredev __initdata;
struct platform_device *__init imx_add_ipu_core(
const struct imx_ipu_core_data *data)
{
/* The resource order is important! */
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + 0x5f,
.flags = IORESOURCE_MEM,
}, {
.start = data->iobase + 0x88,
.end = data->iobase + 0xb3,
.flags = IORESOURCE_MEM,
}, {
.start = data->synirq,
.end = data->synirq,
.flags = IORESOURCE_IRQ,
}, {
.start = data->errirq,
.end = data->errirq,
.flags = IORESOURCE_IRQ,
},
};
return imx_ipu_coredev = imx_add_platform_device("ipu-core", -1,
res, ARRAY_SIZE(res), NULL, 0);
}
struct platform_device *__init imx_alloc_mx3_camera(
const struct imx_ipu_core_data *data,
const struct mx3_camera_pdata *pdata)
{
struct resource res[] = {
{
.start = data->iobase + 0x60,
.end = data->iobase + 0x87,
.flags = IORESOURCE_MEM,
},
};
int ret = -ENOMEM;
struct platform_device *pdev;
if (IS_ERR_OR_NULL(imx_ipu_coredev))
return ERR_PTR(-ENODEV);
pdev = platform_device_alloc("mx3-camera", 0);
if (!pdev)
return ERR_PTR(-ENOMEM);
pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
if (!pdev->dev.dma_mask)
goto err;
*pdev->dev.dma_mask = DMA_BIT_MASK(32);
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
if (ret)
goto err;
if (pdata) {
struct mx3_camera_pdata *copied_pdata;
ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
if (ret) {
err:
kfree(pdev->dev.dma_mask);
platform_device_put(pdev);
return ERR_PTR(-ENODEV);
}
copied_pdata = dev_get_platdata(&pdev->dev);
copied_pdata->dma_dev = &imx_ipu_coredev->dev;
}
return pdev;
}
struct platform_device *__init imx_add_mx3_sdc_fb(
const struct imx_ipu_core_data *data,
struct mx3fb_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase + 0xb4,
.end = data->iobase + 0x1bf,
.flags = IORESOURCE_MEM,
},
};
if (IS_ERR_OR_NULL(imx_ipu_coredev))
return ERR_PTR(-ENODEV);
pdata->dma_dev = &imx_ipu_coredev->dev;
return imx_add_platform_device_dmamask("mx3_sdc_fb", -1,
res, ARRAY_SIZE(res), pdata, sizeof(*pdata),
DMA_BIT_MASK(32));
}
arch/arm/mach-imx/devices/platform-mx2-camera.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "../hardware.h"
#include "devices-common.h"
#define imx_mx2_camera_data_entry_single(soc, _devid) \
{ \
.devid = _devid, \
.iobasecsi = soc ## _CSI_BASE_ADDR, \
.iosizecsi = SZ_4K, \
.irqcsi = soc ## _INT_CSI, \
}
#define imx_mx2_camera_data_entry_single_emma(soc, _devid) \
{ \
.devid = _devid, \
.iobasecsi = soc ## _CSI_BASE_ADDR, \
.iosizecsi = SZ_32, \
.irqcsi = soc ## _INT_CSI, \
.iobaseemmaprp = soc ## _EMMAPRP_BASE_ADDR, \
.iosizeemmaprp = SZ_32, \
.irqemmaprp = soc ## _INT_EMMAPRP, \
}
#ifdef CONFIG_SOC_IMX27
const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst =
imx_mx2_camera_data_entry_single_emma(MX27, "imx27-camera");
#endif /* ifdef CONFIG_SOC_IMX27 */
struct platform_device *__init imx_add_mx2_camera(
const struct imx_mx2_camera_data *data,
const struct mx2_camera_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobasecsi,
.end = data->iobasecsi + data->iosizecsi - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irqcsi,
.end = data->irqcsi,
.flags = IORESOURCE_IRQ,
}, {
.start = data->iobaseemmaprp,
.end = data->iobaseemmaprp + data->iosizeemmaprp - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irqemmaprp,
.end = data->irqemmaprp,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device_dmamask(data->devid, 0,
res, data->iobaseemmaprp ? 4 : 2,
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
arch/arm/mach-imx/devices/platform-mx2-emma.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "../hardware.h"
#include "devices-common.h"
#define imx_mx2_emmaprp_data_entry_single(soc) \
{ \
.iobase = soc ## _EMMAPRP_BASE_ADDR, \
.iosize = SZ_256, \
.irq = soc ## _INT_EMMAPRP, \
}
#ifdef CONFIG_SOC_IMX27
const struct imx_mx2_emma_data imx27_mx2_emmaprp_data __initconst =
imx_mx2_emmaprp_data_entry_single(MX27);
#endif /* ifdef CONFIG_SOC_IMX27 */
struct platform_device *__init imx_add_mx2_emmaprp(
const struct imx_mx2_emma_data *data)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device_dmamask("m2m-emmaprp", 0,
res, 2, NULL, 0, DMA_BIT_MASK(32));
}
arch/arm/mach-imx/devices/platform-mxc-ehci.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include <linux/dma-mapping.h>
#include "../hardware.h"
#include "devices-common.h"
#define imx_mxc_ehci_data_entry_single(soc, _id, hs) \
{ \
.id = _id, \
.iobase = soc ## _USB_ ## hs ## _BASE_ADDR, \
.irq = soc ## _INT_USB_ ## hs, \
}
#ifdef CONFIG_SOC_IMX27
const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst =
imx_mxc_ehci_data_entry_single(MX27, 0, OTG);
const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[] __initconst = {
imx_mxc_ehci_data_entry_single(MX27, 1, HS1),
imx_mxc_ehci_data_entry_single(MX27, 2, HS2),
};
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data __initconst =
imx_mxc_ehci_data_entry_single(MX31, 0, OTG);
const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[] __initconst = {
imx_mxc_ehci_data_entry_single(MX31, 1, HS1),
imx_mxc_ehci_data_entry_single(MX31, 2, HS2),
};
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data __initconst =
imx_mxc_ehci_data_entry_single(MX35, 0, OTG);
const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst =
imx_mxc_ehci_data_entry_single(MX35, 1, HS);
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_mxc_ehci(
const struct imx_mxc_ehci_data *data,
const struct mxc_usbh_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_512 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device_dmamask("mxc-ehci", data->id,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
arch/arm/mach-imx/devices/platform-mxc-mmc.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include <linux/dma-mapping.h>
#include "../hardware.h"
#include "devices-common.h"
#define imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size) \
{ \
.devid = _devid, \
.id = _id, \
.iobase = soc ## _SDHC ## _hwid ## _BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_SDHC ## _hwid, \
.dmareq = soc ## _DMA_REQ_SDHC ## _hwid, \
}
#define imx_mxc_mmc_data_entry(soc, _devid, _id, _hwid, _size) \
[_id] = imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size)
#ifdef CONFIG_SOC_IMX21
const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst = {
#define imx21_mxc_mmc_data_entry(_id, _hwid) \
imx_mxc_mmc_data_entry(MX21, "imx21-mmc", _id, _hwid, SZ_4K)
imx21_mxc_mmc_data_entry(0, 1),
imx21_mxc_mmc_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX27
const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst = {
#define imx27_mxc_mmc_data_entry(_id, _hwid) \
imx_mxc_mmc_data_entry(MX27, "imx21-mmc", _id, _hwid, SZ_4K)
imx27_mxc_mmc_data_entry(0, 1),
imx27_mxc_mmc_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst = {
#define imx31_mxc_mmc_data_entry(_id, _hwid) \
imx_mxc_mmc_data_entry(MX31, "imx31-mmc", _id, _hwid, SZ_16K)
imx31_mxc_mmc_data_entry(0, 1),
imx31_mxc_mmc_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX31 */
struct platform_device *__init imx_add_mxc_mmc(
const struct imx_mxc_mmc_data *data,
const struct imxmmc_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
}, {
.start = data->dmareq,
.end = data->dmareq,
.flags = IORESOURCE_DMA,
},
};
return imx_add_platform_device_dmamask(data->devid, data->id,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
arch/arm/mach-imx/devices/platform-mxc_nand.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2009-2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include <linux/sizes.h>
#include "../hardware.h"
#include "devices-common.h"
#define imx_mxc_nand_data_entry_single(soc, _devid, _size) \
{ \
.devid = _devid, \
.iobase = soc ## _NFC_BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_NFC \
}
#define imx_mxc_nandv3_data_entry_single(soc, _devid, _size) \
{ \
.devid = _devid, \
.id = -1, \
.iobase = soc ## _NFC_BASE_ADDR, \
.iosize = _size, \
.axibase = soc ## _NFC_AXI_BASE_ADDR, \
.irq = soc ## _INT_NFC \
}
#ifdef CONFIG_SOC_IMX21
const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst =
imx_mxc_nand_data_entry_single(MX21, "imx21-nand", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX27
const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst =
imx_mxc_nand_data_entry_single(MX27, "imx27-nand", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst =
imx_mxc_nand_data_entry_single(MX31, "imx27-nand", SZ_4K);
#endif
#ifdef CONFIG_SOC_IMX35
const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst =
imx_mxc_nand_data_entry_single(MX35, "imx25-nand", SZ_8K);
#endif
struct platform_device *__init imx_add_mxc_nand(
const struct imx_mxc_nand_data *data,
const struct mxc_nand_platform_data *pdata)
{
/* AXI has to come first, that's how the mxc_nand driver expect it */
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
}, {
.start = data->axibase,
.end = data->axibase + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
};
return imx_add_platform_device(data->devid, data->id,
res, ARRAY_SIZE(res) - !data->axibase,
pdata, sizeof(*pdata));
}
arch/arm/mach-imx/devices/platform-mxc_rtc.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010-2011 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "../hardware.h"
#include "devices-common.h"
#define imx_mxc_rtc_data_entry_single(soc, _devid) \
{ \
.devid = _devid, \
.iobase = soc ## _RTC_BASE_ADDR, \
.irq = soc ## _INT_RTC, \
}
#ifdef CONFIG_SOC_IMX31
const struct imx_mxc_rtc_data imx31_mxc_rtc_data __initconst =
imx_mxc_rtc_data_entry_single(MX31, "imx21-rtc");
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_mxc_rtc_data imx35_mxc_rtc_data __initconst =
imx_mxc_rtc_data_entry_single(MX35, "imx21-rtc");
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_mxc_rtc(
const struct imx_mxc_rtc_data *data)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device(data->devid, -1,
res, ARRAY_SIZE(res), NULL, 0);
}
arch/arm/mach-imx/devices/platform-mxc_w1.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include "../hardware.h"
#include "devices-common.h"
#define imx_mxc_w1_data_entry_single(soc) \
{ \
.iobase = soc ## _OWIRE_BASE_ADDR, \
}
#ifdef CONFIG_SOC_IMX21
const struct imx_mxc_w1_data imx21_mxc_w1_data __initconst =
imx_mxc_w1_data_entry_single(MX21);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX27
const struct imx_mxc_w1_data imx27_mxc_w1_data __initconst =
imx_mxc_w1_data_entry_single(MX27);
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_mxc_w1_data imx31_mxc_w1_data __initconst =
imx_mxc_w1_data_entry_single(MX31);
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_mxc_w1_data imx35_mxc_w1_data __initconst =
imx_mxc_w1_data_entry_single(MX35);
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_mxc_w1(
const struct imx_mxc_w1_data *data)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
return imx_add_platform_device("mxc_w1", 0,
res, ARRAY_SIZE(res), NULL, 0);
}
arch/arm/mach-imx/devices/platform-pata_imx.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
#include "../hardware.h"
#include "devices-common.h"
#define imx_pata_imx_data_entry_single(soc, _size) \
{ \
.iobase = soc ## _ATA_BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_ATA, \
}
#ifdef CONFIG_SOC_IMX27
const struct imx_pata_imx_data imx27_pata_imx_data __initconst =
imx_pata_imx_data_entry_single(MX27, SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_pata_imx_data imx31_pata_imx_data __initconst =
imx_pata_imx_data_entry_single(MX31, SZ_16K);
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_pata_imx_data imx35_pata_imx_data __initconst =
imx_pata_imx_data_entry_single(MX35, SZ_16K);
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_pata_imx(
const struct imx_pata_imx_data *data)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
},
{
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device("pata_imx", -1,
res, ARRAY_SIZE(res), NULL, 0);
}
arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010 Pengutronix, Wolfram Sang <kernel@pengutronix.de>
*/
#include <linux/platform_data/mmc-esdhc-imx.h>
#include "../hardware.h"
#include "devices-common.h"
#define imx_sdhci_esdhc_imx_data_entry_single(soc, _devid, _id, hwid) \
{ \
.devid = _devid, \
.id = _id, \
.iobase = soc ## _ESDHC ## hwid ## _BASE_ADDR, \
.irq = soc ## _INT_ESDHC ## hwid, \
}
#define imx_sdhci_esdhc_imx_data_entry(soc, devid, id, hwid) \
[id] = imx_sdhci_esdhc_imx_data_entry_single(soc, devid, id, hwid)
#ifdef CONFIG_SOC_IMX35
const struct imx_sdhci_esdhc_imx_data
imx35_sdhci_esdhc_imx_data[] __initconst = {
#define imx35_sdhci_esdhc_imx_data_entry(_id, _hwid) \
imx_sdhci_esdhc_imx_data_entry(MX35, "sdhci-esdhc-imx35", _id, _hwid)
imx35_sdhci_esdhc_imx_data_entry(0, 1),
imx35_sdhci_esdhc_imx_data_entry(1, 2),
imx35_sdhci_esdhc_imx_data_entry(2, 3),
};
#endif /* ifdef CONFIG_SOC_IMX35 */
static const struct esdhc_platform_data default_esdhc_pdata __initconst = {
.wp_type = ESDHC_WP_NONE,
.cd_type = ESDHC_CD_NONE,
};
struct platform_device *__init imx_add_sdhci_esdhc_imx(
const struct imx_sdhci_esdhc_imx_data *data,
const struct esdhc_platform_data *pdata)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
/*
* If machine does not provide pdata, use the default one
* which means no WP/CD support
*/
if (!pdata)
pdata = &default_esdhc_pdata;
return imx_add_platform_device_dmamask(data->devid, data->id, res,
ARRAY_SIZE(res), pdata, sizeof(*pdata),
DMA_BIT_MASK(32));
}
arch/arm/mach-imx/devices/platform-spi_imx.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2009-2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*/
#include <linux/gpio/machine.h>
#include "../hardware.h"
#include "devices-common.h"
#define imx_spi_imx_data_entry_single(soc, type, _devid, _id, hwid, _size) \
{ \
.devid = _devid, \
.id = _id, \
.iobase = soc ## _ ## type ## hwid ## _BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_ ## type ## hwid, \
}
#define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size) \
[id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size)
#ifdef CONFIG_SOC_IMX21
const struct imx_spi_imx_data imx21_cspi_data[] __initconst = {
#define imx21_cspi_data_entry(_id, _hwid) \
imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K)
imx21_cspi_data_entry(0, 1),
imx21_cspi_data_entry(1, 2),
};
#endif
#ifdef CONFIG_SOC_IMX27
const struct imx_spi_imx_data imx27_cspi_data[] __initconst = {
#define imx27_cspi_data_entry(_id, _hwid) \
imx_spi_imx_data_entry(MX27, CSPI, "imx27-cspi", _id, _hwid, SZ_4K)
imx27_cspi_data_entry(0, 1),
imx27_cspi_data_entry(1, 2),
imx27_cspi_data_entry(2, 3),
};
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_spi_imx_data imx31_cspi_data[] __initconst = {
#define imx31_cspi_data_entry(_id, _hwid) \
imx_spi_imx_data_entry(MX31, CSPI, "imx31-cspi", _id, _hwid, SZ_4K)
imx31_cspi_data_entry(0, 1),
imx31_cspi_data_entry(1, 2),
imx31_cspi_data_entry(2, 3),
};
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_spi_imx_data imx35_cspi_data[] __initconst = {
#define imx35_cspi_data_entry(_id, _hwid) \
imx_spi_imx_data_entry(MX35, CSPI, "imx35-cspi", _id, _hwid, SZ_4K)
imx35_cspi_data_entry(0, 1),
imx35_cspi_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_spi_imx(
const struct imx_spi_imx_data *data, struct gpiod_lookup_table *gtable)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
if (gtable)
gpiod_add_lookup_table(gtable);
return imx_add_platform_device(data->devid, data->id,
res, ARRAY_SIZE(res), NULL, 0);
}
arch/arm/mach-imx/ehci-imx27.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
* Copyright (C) 2010 Freescale Semiconductor, Inc.
*/
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX27_OTG_SIC_SHIFT 29
#define MX27_OTG_SIC_MASK (0x3 << MX27_OTG_SIC_SHIFT)
#define MX27_OTG_PM_BIT (1 << 24)
#define MX27_H2_SIC_SHIFT 21
#define MX27_H2_SIC_MASK (0x3 << MX27_H2_SIC_SHIFT)
#define MX27_H2_PM_BIT (1 << 16)
#define MX27_H2_DT_BIT (1 << 5)
#define MX27_H1_SIC_SHIFT 13
#define MX27_H1_SIC_MASK (0x3 << MX27_H1_SIC_SHIFT)
#define MX27_H1_PM_BIT (1 << 8)
#define MX27_H1_DT_BIT (1 << 4)
int mx27_initialize_usb_hw(int port, unsigned int flags)
{
unsigned int v;
v = readl(MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
switch (port) {
case 0: /* OTG port */
v &= ~(MX27_OTG_SIC_MASK | MX27_OTG_PM_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX27_OTG_PM_BIT;
break;
case 1: /* H1 port */
v &= ~(MX27_H1_SIC_MASK | MX27_H1_PM_BIT | MX27_H1_DT_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX27_H1_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX27_H1_DT_BIT;
break;
case 2: /* H2 port */
v &= ~(MX27_H2_SIC_MASK | MX27_H2_PM_BIT | MX27_H2_DT_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H2_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX27_H2_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX27_H2_DT_BIT;
break;
default:
return -EINVAL;
}
writel(v, MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
return 0;
}
arch/arm/mach-imx/ehci-imx31.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
* Copyright (C) 2010 Freescale Semiconductor, Inc.
*/
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX31_OTG_SIC_SHIFT 29
#define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT)
#define MX31_OTG_PM_BIT (1 << 24)
#define MX31_H2_SIC_SHIFT 21
#define MX31_H2_SIC_MASK (0x3 << MX31_H2_SIC_SHIFT)
#define MX31_H2_PM_BIT (1 << 16)
#define MX31_H2_DT_BIT (1 << 5)
#define MX31_H1_SIC_SHIFT 13
#define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT)
#define MX31_H1_PM_BIT (1 << 8)
#define MX31_H1_DT_BIT (1 << 4)
int mx31_initialize_usb_hw(int port, unsigned int flags)
{
unsigned int v;
v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
switch (port) {
case 0: /* OTG port */
v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_OTG_PM_BIT;
break;
case 1: /* H1 port */
v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_H1_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX31_H1_DT_BIT;
break;
case 2: /* H2 port */
v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_H2_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX31_H2_DT_BIT;
break;
default:
return -EINVAL;
}
writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
return 0;
}
arch/arm/mach-imx/ehci-imx35.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
* Copyright (C) 2010 Freescale Semiconductor, Inc.
*/
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX35_OTG_SIC_SHIFT 29
#define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT)
#define MX35_OTG_PM_BIT (1 << 24)
#define MX35_OTG_PP_BIT (1 << 11)
#define MX35_OTG_OCPOL_BIT (1 << 3)
#define MX35_H1_SIC_SHIFT 21
#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT)
#define MX35_H1_PP_BIT (1 << 18)
#define MX35_H1_PM_BIT (1 << 16)
#define MX35_H1_IPPUE_UP_BIT (1 << 7)
#define MX35_H1_IPPUE_DOWN_BIT (1 << 6)
#define MX35_H1_TLL_BIT (1 << 5)
#define MX35_H1_USBTE_BIT (1 << 4)
#define MX35_H1_OCPOL_BIT (1 << 2)
int mx35_initialize_usb_hw(int port, unsigned int flags)
{
unsigned int v;
v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
switch (port) {
case 0: /* OTG port */
v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT | MX35_OTG_PP_BIT |
MX35_OTG_OCPOL_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX35_OTG_PM_BIT;
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
v |= MX35_OTG_PP_BIT;
if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
v |= MX35_OTG_OCPOL_BIT;
break;
case 1: /* H1 port */
v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_PP_BIT |
MX35_H1_OCPOL_BIT | MX35_H1_TLL_BIT | MX35_H1_USBTE_BIT |
MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX35_H1_PM_BIT;
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
v |= MX35_H1_PP_BIT;
if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
v |= MX35_H1_OCPOL_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX35_H1_TLL_BIT;
if (flags & MXC_EHCI_INTERNAL_PHY)
v |= MX35_H1_USBTE_BIT;
if (flags & MXC_EHCI_IPPUE_DOWN)
v |= MX35_H1_IPPUE_DOWN_BIT;
if (flags & MXC_EHCI_IPPUE_UP)
v |= MX35_H1_IPPUE_UP_BIT;
break;
default:
return -EINVAL;
}
writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
return 0;
}
arch/arm/mach-imx/ehci.h deleted 100644 → 0
View file @ a4f07008
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __MACH_IMX_EHCI_H
#define __MACH_IMX_EHCI_H
/* values for portsc field */
#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
#define MXC_EHCI_FORCE_FS (1 << 24)
#define MXC_EHCI_UTMI_8BIT (0 << 28)
#define MXC_EHCI_UTMI_16BIT (1 << 28)
#define MXC_EHCI_SERIAL (1 << 29)
#define MXC_EHCI_MODE_UTMI (0 << 30)
#define MXC_EHCI_MODE_PHILIPS (1 << 30)
#define MXC_EHCI_MODE_ULPI (2 << 30)
#define MXC_EHCI_MODE_SERIAL (3 << 30)
/* values for flags field */
#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0)
#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0)
#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0)
#define MXC_EHCI_INTERFACE_MASK (0xf)
#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6)
#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7)
#define MXC_EHCI_TTL_ENABLED (1 << 8)
#define MXC_EHCI_INTERNAL_PHY (1 << 9)
#define MXC_EHCI_IPPUE_DOWN (1 << 10)
#define MXC_EHCI_IPPUE_UP (1 << 11)
#define MXC_EHCI_WAKEUP_ENABLED (1 << 12)
#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13)
#define MXC_USBCTRL_OFFSET 0
#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8
#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc
#define MXC_USBH2CTRL_OFFSET 0x14
int mx25_initialize_usb_hw(int port, unsigned int flags);
int mx31_initialize_usb_hw(int port, unsigned int flags);
int mx35_initialize_usb_hw(int port, unsigned int flags);
int mx27_initialize_usb_hw(int port, unsigned int flags);
#endif /* __MACH_IMX_EHCI_H */
arch/arm/mach-imx/hardware.h
View file @ accdab6d
...@@ -97,7 +97,6 @@ ...@@ -97,7 +97,6 @@
#include "mx31.h" #include "mx31.h"
#include "mx35.h" #include "mx35.h"
#include "mx2x.h" #include "mx2x.h"
#include "mx21.h"
#include "mx27.h" #include "mx27.h"
#define imx_map_entry(soc, name, _type) { \ #define imx_map_entry(soc, name, _type) { \
......
arch/arm/mach-imx/imx27-dt.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2012 Sascha Hauer, Pengutronix
*/
#include <linux/irq.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "common.h"
#include "mx27.h"
static const char * const imx27_dt_board_compat[] __initconst = {
"fsl,imx27",
NULL
};
DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
.init_late = imx27_pm_init,
.dt_compat = imx27_dt_board_compat,
MACHINE_END
arch/arm/mach-imx/iomux-imx31.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
* Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
*/
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include "hardware.h"
#include "iomux-mx3.h"
/*
* IOMUX register (base) addresses
*/
#define IOMUX_BASE MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR)
#define IOMUXINT_OBS1 (IOMUX_BASE + 0x000)
#define IOMUXINT_OBS2 (IOMUX_BASE + 0x004)
#define IOMUXGPR (IOMUX_BASE + 0x008)
#define IOMUXSW_MUX_CTL (IOMUX_BASE + 0x00C)
#define IOMUXSW_PAD_CTL (IOMUX_BASE + 0x154)
static DEFINE_SPINLOCK(gpio_mux_lock);
#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)
static DECLARE_BITMAP(mxc_pin_alloc_map, NB_PORTS * 32);
/*
* set the mode for a IOMUX pin.
*/
void mxc_iomux_mode(unsigned int pin_mode)
{
u32 field;
u32 l;
u32 mode;
void __iomem *reg;
reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK);
field = pin_mode & 0x3;
mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT;
spin_lock(&gpio_mux_lock);
l = imx_readl(reg);
l &= ~(0xff << (field * 8));
l |= mode << (field * 8);
imx_writel(l, reg);
spin_unlock(&gpio_mux_lock);
}
/*
* This function configures the pad value for a IOMUX pin.
*/
void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
{
u32 field, l;
void __iomem *reg;
pin &= IOMUX_PADNUM_MASK;
reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
field = (pin + 2) % 3;
pr_debug("%s: reg offset = 0x%x, field = %d\n",
__func__, (pin + 2) / 3, field);
spin_lock(&gpio_mux_lock);
l = imx_readl(reg);
l &= ~(0x1ff << (field * 10));
l |= config << (field * 10);
imx_writel(l, reg);
spin_unlock(&gpio_mux_lock);
}
/*
* allocs a single pin:
* - reserves the pin so that it is not claimed by another driver
* - setups the iomux according to the configuration
*/
int mxc_iomux_alloc_pin(unsigned int pin, const char *label)
{
unsigned pad = pin & IOMUX_PADNUM_MASK;
if (pad >= (PIN_MAX + 1)) {
printk(KERN_ERR "mxc_iomux: Attempt to request nonexistent pin %u for \"%s\"\n",
pad, label ? label : "?");
return -EINVAL;
}
if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
pad, label ? label : "?");
return -EBUSY;
}
mxc_iomux_mode(pin);
return 0;
}
int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
const char *label)
{
const unsigned int *p = pin_list;
int i;
int ret = -EINVAL;
for (i = 0; i < count; i++) {
ret = mxc_iomux_alloc_pin(*p, label);
if (ret)
goto setup_error;
p++;
}
return 0;
setup_error:
mxc_iomux_release_multiple_pins(pin_list, i);
return ret;
}
void mxc_iomux_release_pin(unsigned int pin)
{
unsigned pad = pin & IOMUX_PADNUM_MASK;
if (pad < (PIN_MAX + 1))
clear_bit(pad, mxc_pin_alloc_map);
}
void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count)
{
const unsigned int *p = pin_list;
int i;
for (i = 0; i < count; i++) {
mxc_iomux_release_pin(*p);
p++;
}
}
/*
* This function enables/disables the general purpose function for a particular
* signal.
*/
void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en)
{
u32 l;
spin_lock(&gpio_mux_lock);
l = imx_readl(IOMUXGPR);
if (en)
l |= gp;
else
l &= ~gp;
imx_writel(l, IOMUXGPR);
spin_unlock(&gpio_mux_lock);
}
arch/arm/mach-imx/iomux-mx21.h deleted 100644 → 0
View file @ a4f07008
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
*/
#ifndef __MACH_IOMUX_MX21_H__
#define __MACH_IOMUX_MX21_H__
#include "iomux-mx2x.h"
#include "iomux-v1.h"
/* Primary GPIO pin functions */
#define PB22_PF_USBH1_BYP (GPIO_PORTB | GPIO_PF | 22)
#define PB25_PF_USBH1_ON (GPIO_PORTB | GPIO_PF | 25)
#define PC5_PF_USBOTG_SDA (GPIO_PORTC | GPIO_PF | 5)
#define PC6_PF_USBOTG_SCL (GPIO_PORTC | GPIO_PF | 6)
#define PC7_PF_USBOTG_ON (GPIO_PORTC | GPIO_PF | 7)
#define PC8_PF_USBOTG_FS (GPIO_PORTC | GPIO_PF | 8)
#define PC9_PF_USBOTG_OE (GPIO_PORTC | GPIO_PF | 9)
#define PC10_PF_USBOTG_TXDM (GPIO_PORTC | GPIO_PF | 10)
#define PC11_PF_USBOTG_TXDP (GPIO_PORTC | GPIO_PF | 11)
#define PC12_PF_USBOTG_RXDM (GPIO_PORTC | GPIO_PF | 12)
#define PC13_PF_USBOTG_RXDP (GPIO_PORTC | GPIO_PF | 13)
#define PC16_PF_SAP_FS (GPIO_PORTC | GPIO_PF | 16)
#define PC17_PF_SAP_RXD (GPIO_PORTC | GPIO_PF | 17)
#define PC18_PF_SAP_TXD (GPIO_PORTC | GPIO_PF | 18)
#define PC19_PF_SAP_CLK (GPIO_PORTC | GPIO_PF | 19)
#define PE0_PF_TEST_WB2 (GPIO_PORTE | GPIO_PF | 0)
#define PE1_PF_TEST_WB1 (GPIO_PORTE | GPIO_PF | 1)
#define PE2_PF_TEST_WB0 (GPIO_PORTE | GPIO_PF | 2)
#define PF1_PF_NFCE (GPIO_PORTF | GPIO_PF | 1)
#define PF3_PF_NFCLE (GPIO_PORTF | GPIO_PF | 3)
#define PF7_PF_NFIO0 (GPIO_PORTF | GPIO_PF | 7)
#define PF8_PF_NFIO1 (GPIO_PORTF | GPIO_PF | 8)
#define PF9_PF_NFIO2 (GPIO_PORTF | GPIO_PF | 9)
#define PF10_PF_NFIO3 (GPIO_PORTF | GPIO_PF | 10)
#define PF11_PF_NFIO4 (GPIO_PORTF | GPIO_PF | 11)
#define PF12_PF_NFIO5 (GPIO_PORTF | GPIO_PF | 12)
#define PF13_PF_NFIO6 (GPIO_PORTF | GPIO_PF | 13)
#define PF14_PF_NFIO7 (GPIO_PORTF | GPIO_PF | 14)
#define PF16_PF_RES (GPIO_PORTF | GPIO_PF | 16)
/* Alternate GPIO pin functions */
#define PA5_AF_BMI_CLK_CS (GPIO_PORTA | GPIO_AF | 5)
#define PA6_AF_BMI_D0 (GPIO_PORTA | GPIO_AF | 6)
#define PA7_AF_BMI_D1 (GPIO_PORTA | GPIO_AF | 7)
#define PA8_AF_BMI_D2 (GPIO_PORTA | GPIO_AF | 8)
#define PA9_AF_BMI_D3 (GPIO_PORTA | GPIO_AF | 9)
#define PA10_AF_BMI_D4 (GPIO_PORTA | GPIO_AF | 10)
#define PA11_AF_BMI_D5 (GPIO_PORTA | GPIO_AF | 11)
#define PA12_AF_BMI_D6 (GPIO_PORTA | GPIO_AF | 12)
#define PA13_AF_BMI_D7 (GPIO_PORTA | GPIO_AF | 13)
#define PA14_AF_BMI_D8 (GPIO_PORTA | GPIO_AF | 14)
#define PA15_AF_BMI_D9 (GPIO_PORTA | GPIO_AF | 15)
#define PA16_AF_BMI_D10 (GPIO_PORTA | GPIO_AF | 16)
#define PA17_AF_BMI_D11 (GPIO_PORTA | GPIO_AF | 17)
#define PA18_AF_BMI_D12 (GPIO_PORTA | GPIO_AF | 18)
#define PA19_AF_BMI_D13 (GPIO_PORTA | GPIO_AF | 19)
#define PA20_AF_BMI_D14 (GPIO_PORTA | GPIO_AF | 20)
#define PA21_AF_BMI_D15 (GPIO_PORTA | GPIO_AF | 21)
#define PA22_AF_BMI_READ_REQ (GPIO_PORTA | GPIO_AF | 22)
#define PA23_AF_BMI_WRITE (GPIO_PORTA | GPIO_AF | 23)
#define PA29_AF_BMI_RX_FULL (GPIO_PORTA | GPIO_AF | 29)
#define PA30_AF_BMI_READ (GPIO_PORTA | GPIO_AF | 30)
/* AIN GPIO pin functions */
#define PC14_AIN_SYS_CLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
#define PD21_AIN_USBH2_FS (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21)
#define PD22_AIN_USBH2_OE (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22)
#define PD23_AIN_USBH2_TXDM (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23)
#define PD24_AIN_USBH2_TXDP (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24)
#define PE8_AIN_IR_TXD (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8)
#define PF0_AIN_PC_RST (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0)
#define PF1_AIN_PC_CE1 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1)
#define PF2_AIN_PC_CE2 (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2)
#define PF3_AIN_PC_POE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3)
#define PF4_AIN_PC_OE (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4)
#define PF5_AIN_PC_RW (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5)
/* BIN GPIO pin functions */
#define PC14_BIN_SYS_CLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
#define PD27_BIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27)
/* CIN GPIO pin functions */
#define PB26_CIN_USBH1_RXDAT (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26)
/* AOUT GPIO pin functions */
#define PA29_AOUT_BMI_WAIT (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29)
#define PD19_AOUT_USBH2_RXDM (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19)
#define PD20_AOUT_USBH2_RXDP (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20)
#define PD25_AOUT_EXT_DMAREQ (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25)
#define PD26_AOUT_USBOTG_RXDAT (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26)
#define PE9_AOUT_IR_RXD (GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9)
#define PF6_AOUT_PC_BVD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6)
#define PF7_AOUT_PC_BVD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7)
#define PF8_AOUT_PC_VS2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8)
#define PF9_AOUT_PC_VS1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9)
#define PF10_AOUT_PC_WP (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10)
#define PF11_AOUT_PC_READY (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11)
#define PF12_AOUT_PC_WAIT (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12)
#define PF13_AOUT_PC_CD2 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13)
#define PF14_AOUT_PC_CD1 (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14)
#endif /* ifndef __MACH_IOMUX_MX21_H__ */
arch/arm/mach-imx/iomux-mx27.h deleted 100644 → 0
View file @ a4f07008
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
*/
#ifndef __MACH_IOMUX_MX27_H__
#define __MACH_IOMUX_MX27_H__
#include "iomux-mx2x.h"
#include "iomux-v1.h"
/* Primary GPIO pin functions */
#define PA0_PF_USBH2_CLK (GPIO_PORTA | GPIO_PF | 0)
#define PA1_PF_USBH2_DIR (GPIO_PORTA | GPIO_PF | 1)
#define PA2_PF_USBH2_DATA7 (GPIO_PORTA | GPIO_PF | 2)
#define PA3_PF_USBH2_NXT (GPIO_PORTA | GPIO_PF | 3)
#define PA4_PF_USBH2_STP (GPIO_PORTA | GPIO_PF | 4)
#define PB22_PF_USBH1_SUSP (GPIO_PORTB | GPIO_PF | 22)
#define PB25_PF_USBH1_RCV (GPIO_PORTB | GPIO_PF | 25)
#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_PF | GPIO_IN | 6)
#define PC7_PF_USBOTG_DATA5 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 7)
#define PC8_PF_USBOTG_DATA6 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 8)
#define PC9_PF_USBOTG_DATA0 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
#define PC10_PF_USBOTG_DATA2 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 10)
#define PC11_PF_USBOTG_DATA1 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
#define PC12_PF_USBOTG_DATA4 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 12)
#define PC13_PF_USBOTG_DATA3 (GPIO_PORTC | GPIO_PF | GPIO_OUT | 13)
#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 16)
#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 17)
#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 18)
#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 19)
#define PD0_PF_SD3_CMD (GPIO_PORTD | GPIO_PF | 0)
#define PD1_PF_SD3_CLK (GPIO_PORTD | GPIO_PF | 1)
#define PD2_PF_ATA_DATA0 (GPIO_PORTD | GPIO_PF | 2)
#define PD3_PF_ATA_DATA1 (GPIO_PORTD | GPIO_PF | 3)
#define PD4_PF_ATA_DATA2 (GPIO_PORTD | GPIO_PF | 4)
#define PD5_PF_ATA_DATA3 (GPIO_PORTD | GPIO_PF | 5)
#define PD6_PF_ATA_DATA4 (GPIO_PORTD | GPIO_PF | 6)
#define PD7_PF_ATA_DATA5 (GPIO_PORTD | GPIO_PF | 7)
#define PD8_PF_ATA_DATA6 (GPIO_PORTD | GPIO_PF | 8)
#define PD9_PF_ATA_DATA7 (GPIO_PORTD | GPIO_PF | 9)
#define PD10_PF_ATA_DATA8 (GPIO_PORTD | GPIO_PF | 10)
#define PD11_PF_ATA_DATA9 (GPIO_PORTD | GPIO_PF | 11)
#define PD12_PF_ATA_DATA10 (GPIO_PORTD | GPIO_PF | 12)
#define PD13_PF_ATA_DATA11 (GPIO_PORTD | GPIO_PF | 13)
#define PD14_PF_ATA_DATA12 (GPIO_PORTD | GPIO_PF | 14)
#define PD15_PF_ATA_DATA13 (GPIO_PORTD | GPIO_PF | 15)
#define PD16_PF_ATA_DATA14 (GPIO_PORTD | GPIO_PF | 16)
#define PE0_PF_USBOTG_NXT (GPIO_PORTE | GPIO_PF | GPIO_OUT | 0)
#define PE1_PF_USBOTG_STP (GPIO_PORTE | GPIO_PF | GPIO_OUT | 1)
#define PE2_PF_USBOTG_DIR (GPIO_PORTE | GPIO_PF | GPIO_OUT | 2)
#define PE24_PF_USBOTG_CLK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 24)
#define PE25_PF_USBOTG_DATA7 (GPIO_PORTE | GPIO_PF | GPIO_OUT | 25)
#define PF1_PF_NFCLE (GPIO_PORTF | GPIO_PF | 1)
#define PF3_PF_NFCE (GPIO_PORTF | GPIO_PF | 3)
#define PF7_PF_PC_POE (GPIO_PORTF | GPIO_PF | 7)
#define PF8_PF_PC_RW (GPIO_PORTF | GPIO_PF | 8)
#define PF9_PF_PC_IOIS16 (GPIO_PORTF | GPIO_PF | 9)
#define PF10_PF_PC_RST (GPIO_PORTF | GPIO_PF | 10)
#define PF11_PF_PC_BVD2 (GPIO_PORTF | GPIO_PF | 11)
#define PF12_PF_PC_BVD1 (GPIO_PORTF | GPIO_PF | 12)
#define PF13_PF_PC_VS2 (GPIO_PORTF | GPIO_PF | 13)
#define PF14_PF_PC_VS1 (GPIO_PORTF | GPIO_PF | 14)
#define PF16_PF_PC_PWRON (GPIO_PORTF | GPIO_PF | 16)
#define PF17_PF_PC_READY (GPIO_PORTF | GPIO_PF | 17)
#define PF18_PF_PC_WAIT (GPIO_PORTF | GPIO_PF | 18)
#define PF19_PF_PC_CD2 (GPIO_PORTF | GPIO_PF | 19)
#define PF20_PF_PC_CD1 (GPIO_PORTF | GPIO_PF | 20)
#define PF23_PF_ATA_DATA15 (GPIO_PORTF | GPIO_PF | 23)
/* Alternate GPIO pin functions */
#define PB4_AF_MSHC_DATA0 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 4)
#define PB5_AF_MSHC_DATA1 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 5)
#define PB6_AF_MSHC_DATA2 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 6)
#define PB7_AF_MSHC_DATA4 (GPIO_PORTB | GPIO_AF | GPIO_OUT | 7)
#define PB8_AF_MSHC_BS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 8)
#define PB9_AF_MSHC_SCLK (GPIO_PORTB | GPIO_AF | GPIO_OUT | 9)
#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 10)
#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 11)
#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 12)
#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 13)
#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 18)
#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 19)
#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 20)
#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 21)
#define PC8_AF_FEC_MDIO (GPIO_PORTC | GPIO_AF | GPIO_IN | 8)
#define PC24_AF_GPT5_TOUT (GPIO_PORTC | GPIO_AF | 24)
#define PC25_AF_GPT5_TIN (GPIO_PORTC | GPIO_AF | 25)
#define PC26_AF_GPT4_TOUT (GPIO_PORTC | GPIO_AF | 26)
#define PC27_AF_GPT4_TIN (GPIO_PORTC | GPIO_AF | 27)
#define PD1_AF_ETMTRACE_PKT15 (GPIO_PORTD | GPIO_AF | 1)
#define PD6_AF_ETMTRACE_PKT14 (GPIO_PORTD | GPIO_AF | 6)
#define PD7_AF_ETMTRACE_PKT13 (GPIO_PORTD | GPIO_AF | 7)
#define PD9_AF_ETMTRACE_PKT12 (GPIO_PORTD | GPIO_AF | 9)
#define PD2_AF_SD3_D0 (GPIO_PORTD | GPIO_AF | 2)
#define PD3_AF_SD3_D1 (GPIO_PORTD | GPIO_AF | 3)
#define PD4_AF_SD3_D2 (GPIO_PORTD | GPIO_AF | 4)
#define PD5_AF_SD3_D3 (GPIO_PORTD | GPIO_AF | 5)
#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_AF | GPIO_IN | 8)
#define PD10_AF_ETMTRACE_PKT11 (GPIO_PORTD | GPIO_AF | 10)
#define PD11_AF_ETMTRACE_PKT10 (GPIO_PORTD | GPIO_AF | 11)
#define PD12_AF_ETMTRACE_PKT9 (GPIO_PORTD | GPIO_AF | 12)
#define PD13_AF_ETMTRACE_PKT8 (GPIO_PORTD | GPIO_AF | 13)
#define PD14_AF_ETMTRACE_PKT7 (GPIO_PORTD | GPIO_AF | 14)
#define PD15_AF_ETMTRACE_PKT6 (GPIO_PORTD | GPIO_AF | 15)
#define PD16_AF_ETMTRACE_PKT5 (GPIO_PORTD | GPIO_AF | 16)
#define PF1_AF_ETMTRACE_PKT0 (GPIO_PORTF | GPIO_AF | 1)
#define PF3_AF_ETMTRACE_PKT2 (GPIO_PORTF | GPIO_AF | 3)
#define PF5_AF_ETMPIPESTAT11 (GPIO_PORTF | GPIO_AF | 5)
#define PF7_AF_ATA_BUFFER_EN (GPIO_PORTF | GPIO_AF | 7)
#define PF8_AF_ATA_IORDY (GPIO_PORTF | GPIO_AF | 8)
#define PF9_AF_ATA_INTRQ (GPIO_PORTF | GPIO_AF | 9)
#define PF10_AF_ATA_RESET (GPIO_PORTF | GPIO_AF | 10)
#define PF11_AF_ATA_DMACK (GPIO_PORTF | GPIO_AF | 11)
#define PF12_AF_ATA_DMAREQ (GPIO_PORTF | GPIO_AF | 12)
#define PF13_AF_ATA_DA0 (GPIO_PORTF | GPIO_AF | 13)
#define PF14_AF_ATA_DA1 (GPIO_PORTF | GPIO_AF | 14)
#define PF15_AF_ETMTRACE_SYNC (GPIO_PORTF | GPIO_AF | 15)
#define PF16_AF_ATA_DA2 (GPIO_PORTF | GPIO_AF | 16)
#define PF17_AF_ATA_CS0 (GPIO_PORTF | GPIO_AF | 17)
#define PF18_AF_ATA_CS1 (GPIO_PORTF | GPIO_AF | 18)
#define PF19_AF_ATA_DIOW (GPIO_PORTF | GPIO_AF | 19)
#define PF20_AF_ATA_DIOR (GPIO_PORTF | GPIO_AF | 20)
#define PF22_AF_ETMTRACE_CLK (GPIO_PORTF | GPIO_AF | 22)
#define PF23_AF_ETMTRACE_PKT4 (GPIO_PORTF | GPIO_AF | 23)
/* AIN GPIO pin functions */
#define PC14_AIN_SSI1_MCLK (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
#define PC15_AIN_GPT6_TOUT (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15)
#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0)
#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1)
#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2)
#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3)
#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9)
#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16)
#define PD27_AIN_EXT_DMA_GRANT (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27)
#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23)
/* BIN GPIO pin functions */
#define PC14_BIN_SSI2_MCLK (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
/* CIN GPIO pin functions */
#define PD2_CIN_SLCDC1_DAT0 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2)
#define PD3_CIN_SLCDC1_DAT1 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3)
#define PD4_CIN_SLCDC1_DAT2 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4)
#define PD5_CIN_SLCDC1_DAT3 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5)
#define PD6_CIN_SLCDC1_DAT4 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6)
#define PD7_CIN_SLCDC1_DAT5 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7)
#define PD8_CIN_SLCDC1_DAT6 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8)
#define PD9_CIN_SLCDC1_DAT7 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9)
#define PD10_CIN_SLCDC1_DAT8 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10)
#define PD11_CIN_SLCDC1_DAT9 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11)
#define PD12_CIN_SLCDC1_DAT10 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12)
#define PD13_CIN_SLCDC1_DAT11 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13)
#define PD14_CIN_SLCDC1_DAT12 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14)
#define PD15_CIN_SLCDC1_DAT13 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15)
#define PD16_CIN_SLCDC1_DAT14 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16)
#define PD23_CIN_SLCDC1_DAT15 (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23)
#define PF27_CIN_EXT_DMA_GRANT (GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27)
/* LCDC_TESTx on PBxx omitted, because it's not clear what they do */
/* AOUT GPIO pin functions */
#define PC14_AOUT_GPT6_TIN (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14)
#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4)
#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5)
#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6)
#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7)
#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10)
#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11)
#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12)
#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13)
#define PD14_AOUT_FEC_RX_CLK (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14)
#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15)
/* BOUT GPIO pin functions */
#define PC17_BOUT_PC_IOIS16 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17)
#define PC18_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18)
#define PC19_BOUT_PC_BVD1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19)
#define PC28_BOUT_PC_BVD2 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28)
#define PC29_BOUT_PC_VS1 (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29)
#define PC30_BOUT_PC_READY (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30)
#define PC31_BOUT_PC_WAIT (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31)
#endif /* __MACH_IOMUX_MX27_H__ */
arch/arm/mach-imx/iomux-mx2x.h deleted 100644 → 0
View file @ a4f07008
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
*/
#ifndef __MACH_IOMUX_MX2x_H__
#define __MACH_IOMUX_MX2x_H__
/* Primary GPIO pin functions */
#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_PF | GPIO_OUT | 5)
#define PA6_PF_LD0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 6)
#define PA7_PF_LD1 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 7)
#define PA8_PF_LD2 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 8)
#define PA9_PF_LD3 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 9)
#define PA10_PF_LD4 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 10)
#define PA11_PF_LD5 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 11)
#define PA12_PF_LD6 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 12)
#define PA13_PF_LD7 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 13)
#define PA14_PF_LD8 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 14)
#define PA15_PF_LD9 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
#define PA16_PF_LD10 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
#define PA17_PF_LD11 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 17)
#define PA18_PF_LD12 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 18)
#define PA19_PF_LD13 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 19)
#define PA20_PF_LD14 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 20)
#define PA21_PF_LD15 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 21)
#define PA22_PF_LD16 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 22)
#define PA23_PF_LD17 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 23)
#define PA24_PF_REV (GPIO_PORTA | GPIO_PF | GPIO_OUT | 24)
#define PA25_PF_CLS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 25)
#define PA26_PF_PS (GPIO_PORTA | GPIO_PF | GPIO_OUT | 26)
#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_PF | GPIO_OUT | 27)
#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 28)
#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_PF | GPIO_OUT | 29)
#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_PF | GPIO_OUT | 30)
#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_PF | GPIO_OUT | 31)
#define PB4_PF_SD2_D0 (GPIO_PORTB | GPIO_PF | 4)
#define PB5_PF_SD2_D1 (GPIO_PORTB | GPIO_PF | 5)
#define PB6_PF_SD2_D2 (GPIO_PORTB | GPIO_PF | 6)
#define PB7_PF_SD2_D3 (GPIO_PORTB | GPIO_PF | 7)
#define PB8_PF_SD2_CMD (GPIO_PORTB | GPIO_PF | 8)
#define PB9_PF_SD2_CLK (GPIO_PORTB | GPIO_PF | 9)
#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 10)
#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 11)
#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 12)
#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 13)
#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 14)
#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 15)
#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_PF | GPIO_OUT | 16)
#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 17)
#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 18)
#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_PF | GPIO_OUT | 19)
#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 20)
#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_PF | GPIO_OUT | 21)
#define PB23_PF_USB_PWR (GPIO_PORTB | GPIO_PF | 23)
#define PB24_PF_USB_OC (GPIO_PORTB | GPIO_PF | 24)
#define PB26_PF_USBH1_FS (GPIO_PORTB | GPIO_PF | 26)
#define PB27_PF_USBH1_OE (GPIO_PORTB | GPIO_PF | 27)
#define PB28_PF_USBH1_TXDM (GPIO_PORTB | GPIO_PF | 28)
#define PB29_PF_USBH1_TXDP (GPIO_PORTB | GPIO_PF | 29)
#define PB30_PF_USBH1_RXDM (GPIO_PORTB | GPIO_PF | 30)
#define PB31_PF_USBH1_RXDP (GPIO_PORTB | GPIO_PF | 31)
#define PC14_PF_TOUT (GPIO_PORTC | GPIO_PF | 14)
#define PC15_PF_TIN (GPIO_PORTC | GPIO_PF | 15)
#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 20)
#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 21)
#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 22)
#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 23)
#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 24)
#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 25)
#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 26)
#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 27)
#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_PF | GPIO_IN | 28)
#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 29)
#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 30)
#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_PF | GPIO_IN | 31)
#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
#define PD19_PF_CSPI2_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
#define PD20_PF_CSPI2_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
#define PD21_PF_CSPI2_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
#define PD22_PF_CSPI2_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
#define PD23_PF_CSPI2_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 23)
#define PD24_PF_CSPI2_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_PF | GPIO_IN | 30)
#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_PF | GPIO_OUT | 31)
#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 3)
#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 4)
#define PE5_PF_PWMO (GPIO_PORTE | GPIO_PF | 5)
#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 6)
#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 7)
#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 8)
#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 9)
#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 10)
#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 11)
#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_PF | GPIO_OUT | 12)
#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_PF | GPIO_IN | 13)
#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_PF | GPIO_OUT | 14)
#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_PF | GPIO_IN | 15)
#define PE16_PF_RTCK (GPIO_PORTE | GPIO_PF | GPIO_OUT | 16)
#define PE17_PF_RESET_OUT (GPIO_PORTE | GPIO_PF | 17)
#define PE18_PF_SD1_D0 (GPIO_PORTE | GPIO_PF | 18)
#define PE19_PF_SD1_D1 (GPIO_PORTE | GPIO_PF | 19)
#define PE20_PF_SD1_D2 (GPIO_PORTE | GPIO_PF | 20)
#define PE21_PF_SD1_D3 (GPIO_PORTE | GPIO_PF | 21)
#define PE22_PF_SD1_CMD (GPIO_PORTE | GPIO_PF | 22)
#define PE23_PF_SD1_CLK (GPIO_PORTE | GPIO_PF | 23)
#define PF0_PF_NRFB (GPIO_PORTF | GPIO_PF | 0)
#define PF2_PF_NFWP (GPIO_PORTF | GPIO_PF | 2)
#define PF4_PF_NFALE (GPIO_PORTF | GPIO_PF | 4)
#define PF5_PF_NFRE (GPIO_PORTF | GPIO_PF | 5)
#define PF6_PF_NFWE (GPIO_PORTF | GPIO_PF | 6)
#define PF15_PF_CLKO (GPIO_PORTF | GPIO_PF | 15)
#define PF21_PF_CS4 (GPIO_PORTF | GPIO_PF | 21)
#define PF22_PF_CS5 (GPIO_PORTF | GPIO_PF | 22)
/* Alternate GPIO pin functions */
#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_AF | GPIO_IN | 26)
#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_AF | GPIO_OUT | 28)
#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_AF | GPIO_OUT | 29)
#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_AF | GPIO_IN | 31)
#define PC28_AF_SLCDC2_D0 (GPIO_PORTC | GPIO_AF | 28)
#define PC29_AF_SLCDC2_RS (GPIO_PORTC | GPIO_AF | 29)
#define PC30_AF_SLCDC2_CS (GPIO_PORTC | GPIO_AF | 30)
#define PC31_AF_SLCDC2_CLK (GPIO_PORTC | GPIO_AF | 31)
#define PD19_AF_USBH2_DATA4 (GPIO_PORTD | GPIO_AF | 19)
#define PD20_AF_USBH2_DATA3 (GPIO_PORTD | GPIO_AF | 20)
#define PD21_AF_USBH2_DATA6 (GPIO_PORTD | GPIO_AF | 21)
#define PD22_AF_USBH2_DATA0 (GPIO_PORTD | GPIO_AF | 22)
#define PD23_AF_USBH2_DATA2 (GPIO_PORTD | GPIO_AF | 23)
#define PD24_AF_USBH2_DATA1 (GPIO_PORTD | GPIO_AF | 24)
#define PD26_AF_USBH2_DATA5 (GPIO_PORTD | GPIO_AF | 26)
#define PE0_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 0)
#define PE1_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 1)
#define PE2_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 2)
#define PE3_AF_KP_COL7 (GPIO_PORTE | GPIO_AF | 3)
#define PE4_AF_KP_ROW7 (GPIO_PORTE | GPIO_AF | 4)
#define PE6_AF_KP_COL6 (GPIO_PORTE | GPIO_AF | 6)
#define PE7_AF_KP_ROW6 (GPIO_PORTE | GPIO_AF | 7)
#define PE16_AF_OWIRE (GPIO_PORTE | GPIO_AF | 16)
#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_AF | GPIO_IN | 18)
#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_AF | GPIO_OUT | 21)
#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_AF | GPIO_OUT | 22)
#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_AF | GPIO_OUT | 23)
/* AIN GPIO pin functions */
#define PA6_AIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6)
#define PA7_AIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7)
#define PA8_AIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8)
#define PA0_AIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
#define PA11_AIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11)
#define PA13_AIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13)
#define PA15_AIN_SLCDC1_DAT9 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15)
#define PA17_AIN_SLCDC1_DAT11 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
#define PA19_AIN_SLCDC1_DAT13 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19)
#define PA21_AIN_SLCDC1_DAT15 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21)
#define PA22_AIN_EXT_DMAGRANT (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22)
#define PA24_AIN_SLCDC1_D0 (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24)
#define PA25_AIN_SLCDC1_RS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25)
#define PA26_AIN_SLCDC1_CS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26)
#define PA27_AIN_SLCDC1_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27)
#define PB6_AIN_SLCDC1_D0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6)
#define PB7_AIN_SLCDC1_RS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7)
#define PB8_AIN_SLCDC1_CS (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8)
#define PB9_AIN_SLCDC1_CLK (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9)
#define PB25_AIN_SLCDC1_DAT0 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25)
#define PB26_AIN_SLCDC1_DAT1 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26)
#define PB27_AIN_SLCDC1_DAT2 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27)
#define PB28_AIN_SLCDC1_DAT3 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28)
#define PB29_AIN_SLCDC1_DAT4 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29)
#define PB30_AIN_SLCDC1_DAT5 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30)
#define PB31_AIN_SLCDC1_DAT6 (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31)
#define PC5_AIN_SLCDC1_DAT7 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5)
#define PC6_AIN_SLCDC1_DAT8 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6)
#define PC7_AIN_SLCDC1_DAT9 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7)
#define PC8_AIN_SLCDC1_DAT10 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8)
#define PC9_AIN_SLCDC1_DAT11 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9)
#define PC10_AIN_SLCDC1_DAT12 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10)
#define PC11_AIN_SLCDC1_DAT13 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11)
#define PC12_AIN_SLCDC1_DAT14 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12)
#define PC13_AIN_SLCDC1_DAT15 (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13)
#define PE5_AIN_PC_SPKOUT (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5)
/* BIN GPIO pin functions */
#define PE5_BIN_TOUT2 (GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5)
/* CIN GPIO pin functions */
#define PA14_CIN_SLCDC1_DAT0 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14)
#define PA15_CIN_SLCDC1_DAT1 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15)
#define PA16_CIN_SLCDC1_DAT2 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16)
#define PA17_CIN_SLCDC1_DAT3 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17)
#define PA18_CIN_SLCDC1_DAT4 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18)
#define PA19_CIN_SLCDC1_DAT5 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19)
#define PA20_CIN_SLCDC1_DAT6 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20)
#define PA21_CIN_SLCDC1_DAT7 (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21)
#define PB30_CIN_UART4_CTS (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30)
#define PE5_CIN_TOUT3 (GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5)
/* AOUT GPIO pin functions */
#define PB29_AOUT_UART4_RXD (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29)
#define PB31_AOUT_UART4_RTS (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31)
#define PC8_AOUT_USBOTG_TXR_INT (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 8)
#define PC15_AOUT_WKGD (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15)
#define PF21_AOUT_DTACK (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21)
#endif /* ifndef __MACH_IOMUX_MX2x_H__ */
arch/arm/mach-imx/iomux-mx3.h deleted 100644 → 0
View file @ a4f07008
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
*/
#ifndef __MACH_IOMUX_MX3_H__
#define __MACH_IOMUX_MX3_H__
#include <linux/types.h>
/*
* various IOMUX output functions
*/
#define IOMUX_OCONFIG_GPIO (0 << 4) /* used as GPIO */
#define IOMUX_OCONFIG_FUNC (1 << 4) /* used as function */
#define IOMUX_OCONFIG_ALT1 (2 << 4) /* used as alternate function 1 */
#define IOMUX_OCONFIG_ALT2 (3 << 4) /* used as alternate function 2 */
#define IOMUX_OCONFIG_ALT3 (4 << 4) /* used as alternate function 3 */
#define IOMUX_OCONFIG_ALT4 (5 << 4) /* used as alternate function 4 */
#define IOMUX_OCONFIG_ALT5 (6 << 4) /* used as alternate function 5 */
#define IOMUX_OCONFIG_ALT6 (7 << 4) /* used as alternate function 6 */
#define IOMUX_ICONFIG_NONE 0 /* not configured for input */
#define IOMUX_ICONFIG_GPIO 1 /* used as GPIO */
#define IOMUX_ICONFIG_FUNC 2 /* used as function */
#define IOMUX_ICONFIG_ALT1 4 /* used as alternate function 1 */
#define IOMUX_ICONFIG_ALT2 8 /* used as alternate function 2 */
#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO)
#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC)
#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1)
#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2)
/*
* various IOMUX pad functions
*/
enum iomux_pad_config {
PAD_CTL_NOLOOPBACK = 0x0 << 9,
PAD_CTL_LOOPBACK = 0x1 << 9,
PAD_CTL_PKE_NONE = 0x0 << 8,
PAD_CTL_PKE_ENABLE = 0x1 << 8,
PAD_CTL_PUE_KEEPER = 0x0 << 7,
PAD_CTL_PUE_PUD = 0x1 << 7,
PAD_CTL_100K_PD = 0x0 << 5,
PAD_CTL_100K_PU = 0x1 << 5,
PAD_CTL_47K_PU = 0x2 << 5,
PAD_CTL_22K_PU = 0x3 << 5,
PAD_CTL_HYS_CMOS = 0x0 << 4,
PAD_CTL_HYS_SCHMITZ = 0x1 << 4,
PAD_CTL_ODE_CMOS = 0x0 << 3,
PAD_CTL_ODE_OpenDrain = 0x1 << 3,
PAD_CTL_DRV_NORMAL = 0x0 << 1,
PAD_CTL_DRV_HIGH = 0x1 << 1,
PAD_CTL_DRV_MAX = 0x2 << 1,
PAD_CTL_SRE_SLOW = 0x0 << 0,
PAD_CTL_SRE_FAST = 0x1 << 0
};
/*
* various IOMUX general purpose functions
*/
enum iomux_gp_func {
MUX_PGP_FIRI = 1 << 0,
MUX_DDR_MODE = 1 << 1,
MUX_PGP_CSPI_BB = 1 << 2,
MUX_PGP_ATA_1 = 1 << 3,
MUX_PGP_ATA_2 = 1 << 4,
MUX_PGP_ATA_3 = 1 << 5,
MUX_PGP_ATA_4 = 1 << 6,
MUX_PGP_ATA_5 = 1 << 7,
MUX_PGP_ATA_6 = 1 << 8,
MUX_PGP_ATA_7 = 1 << 9,
MUX_PGP_ATA_8 = 1 << 10,
MUX_PGP_UH2 = 1 << 11,
MUX_SDCTL_CSD0_SEL = 1 << 12,
MUX_SDCTL_CSD1_SEL = 1 << 13,
MUX_CSPI1_UART3 = 1 << 14,
MUX_EXTDMAREQ2_MBX_SEL = 1 << 15,
MUX_TAMPER_DETECT_EN = 1 << 16,
MUX_PGP_USB_4WIRE = 1 << 17,
MUX_PGP_USB_COMMON = 1 << 18,
MUX_SDHC_MEMSTICK1 = 1 << 19,
MUX_SDHC_MEMSTICK2 = 1 << 20,
MUX_PGP_SPLL_BYP = 1 << 21,
MUX_PGP_UPLL_BYP = 1 << 22,
MUX_PGP_MSHC1_CLK_SEL = 1 << 23,
MUX_PGP_MSHC2_CLK_SEL = 1 << 24,
MUX_CSPI3_UART5_SEL = 1 << 25,
MUX_PGP_ATA_9 = 1 << 26,
MUX_PGP_USB_SUSPEND = 1 << 27,
MUX_PGP_USB_OTG_LOOPBACK = 1 << 28,
MUX_PGP_USB_HS1_LOOPBACK = 1 << 29,
MUX_PGP_USB_HS2_LOOPBACK = 1 << 30,
MUX_CLKO_DDR_MODE = 1 << 31,
};
/*
* setups a single pin:
* - reserves the pin so that it is not claimed by another driver
* - setups the iomux according to the configuration
* - if the pin is configured as a GPIO, we claim it through kernel gpiolib
*/
int mxc_iomux_alloc_pin(unsigned int pin, const char *label);
/*
* setups multiple pins
* convenient way to call the above function with tables
*/
int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
const char *label);
/*
* releases a single pin:
* - make it available for a future use by another driver
* - frees the GPIO if the pin was configured as GPIO
* - DOES NOT reconfigure the IOMUX in its reset state
*/
void mxc_iomux_release_pin(unsigned int pin);
/*
* releases multiple pins
* convenvient way to call the above function with tables
*/
void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count);
/*
* This function enables/disables the general purpose function for a particular
* signal.
*/
void mxc_iomux_set_gpr(enum iomux_gp_func, bool en);
/*
* This function only configures the iomux hardware.
* It is called by the setup functions and should not be called directly anymore.
* It is here visible for backward compatibility
*/
void mxc_iomux_mode(unsigned int pin_mode);
#define IOMUX_PADNUM_MASK 0x1ff
#define IOMUX_GPIONUM_SHIFT 9
#define IOMUX_GPIONUM_MASK (0xff << IOMUX_GPIONUM_SHIFT)
#define IOMUX_MODE_SHIFT 17
#define IOMUX_MODE_MASK (0xff << IOMUX_MODE_SHIFT)
#define IOMUX_PIN(gpionum, padnum) \
(((gpionum << IOMUX_GPIONUM_SHIFT) & IOMUX_GPIONUM_MASK) | \
(padnum & IOMUX_PADNUM_MASK))
#define IOMUX_MODE(pin, mode) (pin | mode << IOMUX_MODE_SHIFT)
#define IOMUX_TO_GPIO(iomux_pin) \
((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT)
/*
* This enumeration is constructed based on the Section
* "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated
* value is constructed based on the rules described above.
*/
enum iomux_pins {
MX31_PIN_TTM_PAD = IOMUX_PIN(0xff, 0),
MX31_PIN_CSPI3_SPI_RDY = IOMUX_PIN(0xff, 1),
MX31_PIN_CSPI3_SCLK = IOMUX_PIN(0xff, 2),
MX31_PIN_CSPI3_MISO = IOMUX_PIN(0xff, 3),
MX31_PIN_CSPI3_MOSI = IOMUX_PIN(0xff, 4),
MX31_PIN_CLKSS = IOMUX_PIN(0xff, 5),
MX31_PIN_CE_CONTROL = IOMUX_PIN(0xff, 6),
MX31_PIN_ATA_RESET_B = IOMUX_PIN(95, 7),
MX31_PIN_ATA_DMACK = IOMUX_PIN(94, 8),
MX31_PIN_ATA_DIOW = IOMUX_PIN(93, 9),
MX31_PIN_ATA_DIOR = IOMUX_PIN(92, 10),
MX31_PIN_ATA_CS1 = IOMUX_PIN(91, 11),
MX31_PIN_ATA_CS0 = IOMUX_PIN(90, 12),
MX31_PIN_SD1_DATA3 = IOMUX_PIN(63, 13),
MX31_PIN_SD1_DATA2 = IOMUX_PIN(62, 14),
MX31_PIN_SD1_DATA1 = IOMUX_PIN(61, 15),
MX31_PIN_SD1_DATA0 = IOMUX_PIN(60, 16),
MX31_PIN_SD1_CLK = IOMUX_PIN(59, 17),
MX31_PIN_SD1_CMD = IOMUX_PIN(58, 18),
MX31_PIN_D3_SPL = IOMUX_PIN(0xff, 19),
MX31_PIN_D3_CLS = IOMUX_PIN(0xff, 20),
MX31_PIN_D3_REV = IOMUX_PIN(0xff, 21),
MX31_PIN_CONTRAST = IOMUX_PIN(0xff, 22),
MX31_PIN_VSYNC3 = IOMUX_PIN(0xff, 23),
MX31_PIN_READ = IOMUX_PIN(0xff, 24),
MX31_PIN_WRITE = IOMUX_PIN(0xff, 25),
MX31_PIN_PAR_RS = IOMUX_PIN(0xff, 26),
MX31_PIN_SER_RS = IOMUX_PIN(89, 27),
MX31_PIN_LCS1 = IOMUX_PIN(88, 28),
MX31_PIN_LCS0 = IOMUX_PIN(87, 29),
MX31_PIN_SD_D_CLK = IOMUX_PIN(86, 30),
MX31_PIN_SD_D_IO = IOMUX_PIN(85, 31),
MX31_PIN_SD_D_I = IOMUX_PIN(84, 32),
MX31_PIN_DRDY0 = IOMUX_PIN(0xff, 33),
MX31_PIN_FPSHIFT = IOMUX_PIN(0xff, 34),
MX31_PIN_HSYNC = IOMUX_PIN(0xff, 35),
MX31_PIN_VSYNC0 = IOMUX_PIN(0xff, 36),
MX31_PIN_LD17 = IOMUX_PIN(0xff, 37),
MX31_PIN_LD16 = IOMUX_PIN(0xff, 38),
MX31_PIN_LD15 = IOMUX_PIN(0xff, 39),
MX31_PIN_LD14 = IOMUX_PIN(0xff, 40),
MX31_PIN_LD13 = IOMUX_PIN(0xff, 41),
MX31_PIN_LD12 = IOMUX_PIN(0xff, 42),
MX31_PIN_LD11 = IOMUX_PIN(0xff, 43),
MX31_PIN_LD10 = IOMUX_PIN(0xff, 44),
MX31_PIN_LD9 = IOMUX_PIN(0xff, 45),
MX31_PIN_LD8 = IOMUX_PIN(0xff, 46),
MX31_PIN_LD7 = IOMUX_PIN(0xff, 47),
MX31_PIN_LD6 = IOMUX_PIN(0xff, 48),
MX31_PIN_LD5 = IOMUX_PIN(0xff, 49),
MX31_PIN_LD4 = IOMUX_PIN(0xff, 50),
MX31_PIN_LD3 = IOMUX_PIN(0xff, 51),
MX31_PIN_LD2 = IOMUX_PIN(0xff, 52),
MX31_PIN_LD1 = IOMUX_PIN(0xff, 53),
MX31_PIN_LD0 = IOMUX_PIN(0xff, 54),
MX31_PIN_USBH2_DATA1 = IOMUX_PIN(0xff, 55),
MX31_PIN_USBH2_DATA0 = IOMUX_PIN(0xff, 56),
MX31_PIN_USBH2_NXT = IOMUX_PIN(0xff, 57),
MX31_PIN_USBH2_STP = IOMUX_PIN(0xff, 58),
MX31_PIN_USBH2_DIR = IOMUX_PIN(0xff, 59),
MX31_PIN_USBH2_CLK = IOMUX_PIN(0xff, 60),
MX31_PIN_USBOTG_DATA7 = IOMUX_PIN(0xff, 61),
MX31_PIN_USBOTG_DATA6 = IOMUX_PIN(0xff, 62),
MX31_PIN_USBOTG_DATA5 = IOMUX_PIN(0xff, 63),
MX31_PIN_USBOTG_DATA4 = IOMUX_PIN(0xff, 64),
MX31_PIN_USBOTG_DATA3 = IOMUX_PIN(0xff, 65),
MX31_PIN_USBOTG_DATA2 = IOMUX_PIN(0xff, 66),
MX31_PIN_USBOTG_DATA1 = IOMUX_PIN(0xff, 67),
MX31_PIN_USBOTG_DATA0 = IOMUX_PIN(0xff, 68),
MX31_PIN_USBOTG_NXT = IOMUX_PIN(0xff, 69),
MX31_PIN_USBOTG_STP = IOMUX_PIN(0xff, 70),
MX31_PIN_USBOTG_DIR = IOMUX_PIN(0xff, 71),
MX31_PIN_USBOTG_CLK = IOMUX_PIN(0xff, 72),
MX31_PIN_USB_BYP = IOMUX_PIN(31, 73),
MX31_PIN_USB_OC = IOMUX_PIN(30, 74),
MX31_PIN_USB_PWR = IOMUX_PIN(29, 75),
MX31_PIN_SJC_MOD = IOMUX_PIN(0xff, 76),
MX31_PIN_DE_B = IOMUX_PIN(0xff, 77),
MX31_PIN_TRSTB = IOMUX_PIN(0xff, 78),
MX31_PIN_TDO = IOMUX_PIN(0xff, 79),
MX31_PIN_TDI = IOMUX_PIN(0xff, 80),
MX31_PIN_TMS = IOMUX_PIN(0xff, 81),
MX31_PIN_TCK = IOMUX_PIN(0xff, 82),
MX31_PIN_RTCK = IOMUX_PIN(0xff, 83),
MX31_PIN_KEY_COL7 = IOMUX_PIN(57, 84),
MX31_PIN_KEY_COL6 = IOMUX_PIN(56, 85),
MX31_PIN_KEY_COL5 = IOMUX_PIN(55, 86),
MX31_PIN_KEY_COL4 = IOMUX_PIN(54, 87),
MX31_PIN_KEY_COL3 = IOMUX_PIN(0xff, 88),
MX31_PIN_KEY_COL2 = IOMUX_PIN(0xff, 89),
MX31_PIN_KEY_COL1 = IOMUX_PIN(0xff, 90),
MX31_PIN_KEY_COL0 = IOMUX_PIN(0xff, 91),
MX31_PIN_KEY_ROW7 = IOMUX_PIN(53, 92),
MX31_PIN_KEY_ROW6 = IOMUX_PIN(52, 93),
MX31_PIN_KEY_ROW5 = IOMUX_PIN(51, 94),
MX31_PIN_KEY_ROW4 = IOMUX_PIN(50, 95),
MX31_PIN_KEY_ROW3 = IOMUX_PIN(0xff, 96),
MX31_PIN_KEY_ROW2 = IOMUX_PIN(0xff, 97),
MX31_PIN_KEY_ROW1 = IOMUX_PIN(0xff, 98),
MX31_PIN_KEY_ROW0 = IOMUX_PIN(0xff, 99),
MX31_PIN_BATT_LINE = IOMUX_PIN(49, 100),
MX31_PIN_CTS2 = IOMUX_PIN(0xff, 101),
MX31_PIN_RTS2 = IOMUX_PIN(0xff, 102),
MX31_PIN_TXD2 = IOMUX_PIN(28, 103),
MX31_PIN_RXD2 = IOMUX_PIN(27, 104),
MX31_PIN_DTR_DCE2 = IOMUX_PIN(48, 105),
MX31_PIN_DCD_DTE1 = IOMUX_PIN(47, 106),
MX31_PIN_RI_DTE1 = IOMUX_PIN(46, 107),
MX31_PIN_DSR_DTE1 = IOMUX_PIN(45, 108),
MX31_PIN_DTR_DTE1 = IOMUX_PIN(44, 109),
MX31_PIN_DCD_DCE1 = IOMUX_PIN(43, 110),
MX31_PIN_RI_DCE1 = IOMUX_PIN(42, 111),
MX31_PIN_DSR_DCE1 = IOMUX_PIN(41, 112),
MX31_PIN_DTR_DCE1 = IOMUX_PIN(40, 113),
MX31_PIN_CTS1 = IOMUX_PIN(39, 114),
MX31_PIN_RTS1 = IOMUX_PIN(38, 115),
MX31_PIN_TXD1 = IOMUX_PIN(37, 116),
MX31_PIN_RXD1 = IOMUX_PIN(36, 117),
MX31_PIN_CSPI2_SPI_RDY = IOMUX_PIN(0xff, 118),
MX31_PIN_CSPI2_SCLK = IOMUX_PIN(0xff, 119),
MX31_PIN_CSPI2_SS2 = IOMUX_PIN(0xff, 120),
MX31_PIN_CSPI2_SS1 = IOMUX_PIN(0xff, 121),
MX31_PIN_CSPI2_SS0 = IOMUX_PIN(0xff, 122),
MX31_PIN_CSPI2_MISO = IOMUX_PIN(0xff, 123),
MX31_PIN_CSPI2_MOSI = IOMUX_PIN(0xff, 124),
MX31_PIN_CSPI1_SPI_RDY = IOMUX_PIN(0xff, 125),
MX31_PIN_CSPI1_SCLK = IOMUX_PIN(0xff, 126),
MX31_PIN_CSPI1_SS2 = IOMUX_PIN(0xff, 127),
MX31_PIN_CSPI1_SS1 = IOMUX_PIN(0xff, 128),
MX31_PIN_CSPI1_SS0 = IOMUX_PIN(0xff, 129),
MX31_PIN_CSPI1_MISO = IOMUX_PIN(0xff, 130),
MX31_PIN_CSPI1_MOSI = IOMUX_PIN(0xff, 131),
MX31_PIN_SFS6 = IOMUX_PIN(26, 132),
MX31_PIN_SCK6 = IOMUX_PIN(25, 133),
MX31_PIN_SRXD6 = IOMUX_PIN(24, 134),
MX31_PIN_STXD6 = IOMUX_PIN(23, 135),
MX31_PIN_SFS5 = IOMUX_PIN(0xff, 136),
MX31_PIN_SCK5 = IOMUX_PIN(0xff, 137),
MX31_PIN_SRXD5 = IOMUX_PIN(22, 138),
MX31_PIN_STXD5 = IOMUX_PIN(21, 139),
MX31_PIN_SFS4 = IOMUX_PIN(0xff, 140),
MX31_PIN_SCK4 = IOMUX_PIN(0xff, 141),
MX31_PIN_SRXD4 = IOMUX_PIN(20, 142),
MX31_PIN_STXD4 = IOMUX_PIN(19, 143),
MX31_PIN_SFS3 = IOMUX_PIN(0xff, 144),
MX31_PIN_SCK3 = IOMUX_PIN(0xff, 145),
MX31_PIN_SRXD3 = IOMUX_PIN(18, 146),
MX31_PIN_STXD3 = IOMUX_PIN(17, 147),
MX31_PIN_I2C_DAT = IOMUX_PIN(0xff, 148),
MX31_PIN_I2C_CLK = IOMUX_PIN(0xff, 149),
MX31_PIN_CSI_PIXCLK = IOMUX_PIN(83, 150),
MX31_PIN_CSI_HSYNC = IOMUX_PIN(82, 151),
MX31_PIN_CSI_VSYNC = IOMUX_PIN(81, 152),
MX31_PIN_CSI_MCLK = IOMUX_PIN(80, 153),
MX31_PIN_CSI_D15 = IOMUX_PIN(79, 154),
MX31_PIN_CSI_D14 = IOMUX_PIN(78, 155),
MX31_PIN_CSI_D13 = IOMUX_PIN(77, 156),
MX31_PIN_CSI_D12 = IOMUX_PIN(76, 157),
MX31_PIN_CSI_D11 = IOMUX_PIN(75, 158),
MX31_PIN_CSI_D10 = IOMUX_PIN(74, 159),
MX31_PIN_CSI_D9 = IOMUX_PIN(73, 160),
MX31_PIN_CSI_D8 = IOMUX_PIN(72, 161),
MX31_PIN_CSI_D7 = IOMUX_PIN(71, 162),
MX31_PIN_CSI_D6 = IOMUX_PIN(70, 163),
MX31_PIN_CSI_D5 = IOMUX_PIN(69, 164),
MX31_PIN_CSI_D4 = IOMUX_PIN(68, 165),
MX31_PIN_M_GRANT = IOMUX_PIN(0xff, 166),
MX31_PIN_M_REQUEST = IOMUX_PIN(0xff, 167),
MX31_PIN_PC_POE = IOMUX_PIN(0xff, 168),
MX31_PIN_PC_RW_B = IOMUX_PIN(0xff, 169),
MX31_PIN_IOIS16 = IOMUX_PIN(0xff, 170),
MX31_PIN_PC_RST = IOMUX_PIN(0xff, 171),
MX31_PIN_PC_BVD2 = IOMUX_PIN(0xff, 172),
MX31_PIN_PC_BVD1 = IOMUX_PIN(0xff, 173),
MX31_PIN_PC_VS2 = IOMUX_PIN(0xff, 174),
MX31_PIN_PC_VS1 = IOMUX_PIN(0xff, 175),
MX31_PIN_PC_PWRON = IOMUX_PIN(0xff, 176),
MX31_PIN_PC_READY = IOMUX_PIN(0xff, 177),
MX31_PIN_PC_WAIT_B = IOMUX_PIN(0xff, 178),
MX31_PIN_PC_CD2_B = IOMUX_PIN(0xff, 179),
MX31_PIN_PC_CD1_B = IOMUX_PIN(0xff, 180),
MX31_PIN_D0 = IOMUX_PIN(0xff, 181),
MX31_PIN_D1 = IOMUX_PIN(0xff, 182),
MX31_PIN_D2 = IOMUX_PIN(0xff, 183),
MX31_PIN_D3 = IOMUX_PIN(0xff, 184),
MX31_PIN_D4 = IOMUX_PIN(0xff, 185),
MX31_PIN_D5 = IOMUX_PIN(0xff, 186),
MX31_PIN_D6 = IOMUX_PIN(0xff, 187),
MX31_PIN_D7 = IOMUX_PIN(0xff, 188),
MX31_PIN_D8 = IOMUX_PIN(0xff, 189),
MX31_PIN_D9 = IOMUX_PIN(0xff, 190),
MX31_PIN_D10 = IOMUX_PIN(0xff, 191),
MX31_PIN_D11 = IOMUX_PIN(0xff, 192),
MX31_PIN_D12 = IOMUX_PIN(0xff, 193),
MX31_PIN_D13 = IOMUX_PIN(0xff, 194),
MX31_PIN_D14 = IOMUX_PIN(0xff, 195),
MX31_PIN_D15 = IOMUX_PIN(0xff, 196),
MX31_PIN_NFRB = IOMUX_PIN(16, 197),
MX31_PIN_NFCE_B = IOMUX_PIN(15, 198),
MX31_PIN_NFWP_B = IOMUX_PIN(14, 199),
MX31_PIN_NFCLE = IOMUX_PIN(13, 200),
MX31_PIN_NFALE = IOMUX_PIN(12, 201),
MX31_PIN_NFRE_B = IOMUX_PIN(11, 202),
MX31_PIN_NFWE_B = IOMUX_PIN(10, 203),
MX31_PIN_SDQS3 = IOMUX_PIN(0xff, 204),
MX31_PIN_SDQS2 = IOMUX_PIN(0xff, 205),
MX31_PIN_SDQS1 = IOMUX_PIN(0xff, 206),
MX31_PIN_SDQS0 = IOMUX_PIN(0xff, 207),
MX31_PIN_SDCLK_B = IOMUX_PIN(0xff, 208),
MX31_PIN_SDCLK = IOMUX_PIN(0xff, 209),
MX31_PIN_SDCKE1 = IOMUX_PIN(0xff, 210),
MX31_PIN_SDCKE0 = IOMUX_PIN(0xff, 211),
MX31_PIN_SDWE = IOMUX_PIN(0xff, 212),
MX31_PIN_CAS = IOMUX_PIN(0xff, 213),
MX31_PIN_RAS = IOMUX_PIN(0xff, 214),
MX31_PIN_RW = IOMUX_PIN(0xff, 215),
MX31_PIN_BCLK = IOMUX_PIN(0xff, 216),
MX31_PIN_LBA = IOMUX_PIN(0xff, 217),
MX31_PIN_ECB = IOMUX_PIN(0xff, 218),
MX31_PIN_CS5 = IOMUX_PIN(0xff, 219),
MX31_PIN_CS4 = IOMUX_PIN(0xff, 220),
MX31_PIN_CS3 = IOMUX_PIN(0xff, 221),
MX31_PIN_CS2 = IOMUX_PIN(0xff, 222),
MX31_PIN_CS1 = IOMUX_PIN(0xff, 223),
MX31_PIN_CS0 = IOMUX_PIN(0xff, 224),
MX31_PIN_OE = IOMUX_PIN(0xff, 225),
MX31_PIN_EB1 = IOMUX_PIN(0xff, 226),
MX31_PIN_EB0 = IOMUX_PIN(0xff, 227),
MX31_PIN_DQM3 = IOMUX_PIN(0xff, 228),
MX31_PIN_DQM2 = IOMUX_PIN(0xff, 229),
MX31_PIN_DQM1 = IOMUX_PIN(0xff, 230),
MX31_PIN_DQM0 = IOMUX_PIN(0xff, 231),
MX31_PIN_SD31 = IOMUX_PIN(0xff, 232),
MX31_PIN_SD30 = IOMUX_PIN(0xff, 233),
MX31_PIN_SD29 = IOMUX_PIN(0xff, 234),
MX31_PIN_SD28 = IOMUX_PIN(0xff, 235),
MX31_PIN_SD27 = IOMUX_PIN(0xff, 236),
MX31_PIN_SD26 = IOMUX_PIN(0xff, 237),
MX31_PIN_SD25 = IOMUX_PIN(0xff, 238),
MX31_PIN_SD24 = IOMUX_PIN(0xff, 239),
MX31_PIN_SD23 = IOMUX_PIN(0xff, 240),
MX31_PIN_SD22 = IOMUX_PIN(0xff, 241),
MX31_PIN_SD21 = IOMUX_PIN(0xff, 242),
MX31_PIN_SD20 = IOMUX_PIN(0xff, 243),
MX31_PIN_SD19 = IOMUX_PIN(0xff, 244),
MX31_PIN_SD18 = IOMUX_PIN(0xff, 245),
MX31_PIN_SD17 = IOMUX_PIN(0xff, 246),
MX31_PIN_SD16 = IOMUX_PIN(0xff, 247),
MX31_PIN_SD15 = IOMUX_PIN(0xff, 248),
MX31_PIN_SD14 = IOMUX_PIN(0xff, 249),
MX31_PIN_SD13 = IOMUX_PIN(0xff, 250),
MX31_PIN_SD12 = IOMUX_PIN(0xff, 251),
MX31_PIN_SD11 = IOMUX_PIN(0xff, 252),
MX31_PIN_SD10 = IOMUX_PIN(0xff, 253),
MX31_PIN_SD9 = IOMUX_PIN(0xff, 254),
MX31_PIN_SD8 = IOMUX_PIN(0xff, 255),
MX31_PIN_SD7 = IOMUX_PIN(0xff, 256),
MX31_PIN_SD6 = IOMUX_PIN(0xff, 257),
MX31_PIN_SD5 = IOMUX_PIN(0xff, 258),
MX31_PIN_SD4 = IOMUX_PIN(0xff, 259),
MX31_PIN_SD3 = IOMUX_PIN(0xff, 260),
MX31_PIN_SD2 = IOMUX_PIN(0xff, 261),
MX31_PIN_SD1 = IOMUX_PIN(0xff, 262),
MX31_PIN_SD0 = IOMUX_PIN(0xff, 263),
MX31_PIN_SDBA0 = IOMUX_PIN(0xff, 264),
MX31_PIN_SDBA1 = IOMUX_PIN(0xff, 265),
MX31_PIN_A25 = IOMUX_PIN(0xff, 266),
MX31_PIN_A24 = IOMUX_PIN(0xff, 267),
MX31_PIN_A23 = IOMUX_PIN(0xff, 268),
MX31_PIN_A22 = IOMUX_PIN(0xff, 269),
MX31_PIN_A21 = IOMUX_PIN(0xff, 270),
MX31_PIN_A20 = IOMUX_PIN(0xff, 271),
MX31_PIN_A19 = IOMUX_PIN(0xff, 272),
MX31_PIN_A18 = IOMUX_PIN(0xff, 273),
MX31_PIN_A17 = IOMUX_PIN(0xff, 274),
MX31_PIN_A16 = IOMUX_PIN(0xff, 275),
MX31_PIN_A14 = IOMUX_PIN(0xff, 276),
MX31_PIN_A15 = IOMUX_PIN(0xff, 277),
MX31_PIN_A13 = IOMUX_PIN(0xff, 278),
MX31_PIN_A12 = IOMUX_PIN(0xff, 279),
MX31_PIN_A11 = IOMUX_PIN(0xff, 280),
MX31_PIN_MA10 = IOMUX_PIN(0xff, 281),
MX31_PIN_A10 = IOMUX_PIN(0xff, 282),
MX31_PIN_A9 = IOMUX_PIN(0xff, 283),
MX31_PIN_A8 = IOMUX_PIN(0xff, 284),
MX31_PIN_A7 = IOMUX_PIN(0xff, 285),
MX31_PIN_A6 = IOMUX_PIN(0xff, 286),
MX31_PIN_A5 = IOMUX_PIN(0xff, 287),
MX31_PIN_A4 = IOMUX_PIN(0xff, 288),
MX31_PIN_A3 = IOMUX_PIN(0xff, 289),
MX31_PIN_A2 = IOMUX_PIN(0xff, 290),
MX31_PIN_A1 = IOMUX_PIN(0xff, 291),
MX31_PIN_A0 = IOMUX_PIN(0xff, 292),
MX31_PIN_VPG1 = IOMUX_PIN(0xff, 293),
MX31_PIN_VPG0 = IOMUX_PIN(0xff, 294),
MX31_PIN_DVFS1 = IOMUX_PIN(0xff, 295),
MX31_PIN_DVFS0 = IOMUX_PIN(0xff, 296),
MX31_PIN_VSTBY = IOMUX_PIN(0xff, 297),
MX31_PIN_POWER_FAIL = IOMUX_PIN(0xff, 298),
MX31_PIN_CKIL = IOMUX_PIN(0xff, 299),
MX31_PIN_BOOT_MODE4 = IOMUX_PIN(0xff, 300),
MX31_PIN_BOOT_MODE3 = IOMUX_PIN(0xff, 301),
MX31_PIN_BOOT_MODE2 = IOMUX_PIN(0xff, 302),
MX31_PIN_BOOT_MODE1 = IOMUX_PIN(0xff, 303),
MX31_PIN_BOOT_MODE0 = IOMUX_PIN(0xff, 304),
MX31_PIN_CLKO = IOMUX_PIN(0xff, 305),
MX31_PIN_POR_B = IOMUX_PIN(0xff, 306),
MX31_PIN_RESET_IN_B = IOMUX_PIN(0xff, 307),
MX31_PIN_CKIH = IOMUX_PIN(0xff, 308),
MX31_PIN_SIMPD0 = IOMUX_PIN(35, 309),
MX31_PIN_SRX0 = IOMUX_PIN(34, 310),
MX31_PIN_STX0 = IOMUX_PIN(33, 311),
MX31_PIN_SVEN0 = IOMUX_PIN(32, 312),
MX31_PIN_SRST0 = IOMUX_PIN(67, 313),
MX31_PIN_SCLK0 = IOMUX_PIN(66, 314),
MX31_PIN_GPIO3_1 = IOMUX_PIN(65, 315),
MX31_PIN_GPIO3_0 = IOMUX_PIN(64, 316),
MX31_PIN_GPIO1_6 = IOMUX_PIN( 6, 317),
MX31_PIN_GPIO1_5 = IOMUX_PIN( 5, 318),
MX31_PIN_GPIO1_4 = IOMUX_PIN( 4, 319),
MX31_PIN_GPIO1_3 = IOMUX_PIN( 3, 320),
MX31_PIN_GPIO1_2 = IOMUX_PIN( 2, 321),
MX31_PIN_GPIO1_1 = IOMUX_PIN( 1, 322),
MX31_PIN_GPIO1_0 = IOMUX_PIN( 0, 323),
MX31_PIN_PWMO = IOMUX_PIN( 9, 324),
MX31_PIN_WATCHDOG_RST = IOMUX_PIN(0xff, 325),
MX31_PIN_COMPARE = IOMUX_PIN( 8, 326),
MX31_PIN_CAPTURE = IOMUX_PIN( 7, 327),
};
#define PIN_MAX 327
#define NB_PORTS 12 /* NB_PINS/32, we chose 32 pins per "PORT" */
/*
* Convenience values for use with mxc_iomux_mode()
*
* Format here is MX31_PIN_(pin name)__(function)
*/
#define MX31_PIN_CSPI3_MOSI__RXD3 IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSPI3_MISO__TXD3 IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSPI3_SCLK__RTS3 IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSPI3_SPI_RDY__CTS3 IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CTS1__CTS1 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_RTS1__SFS IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_ALT2)
#define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_TXD1__SCK IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_ALT2)
#define MX31_PIN_RXD1__RXD1 IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_RXD1__STXDA IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_ALT2)
#define MX31_PIN_DCD_DCE1__DCD_DCE1 IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_RI_DCE1__RI_DCE1 IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_DSR_DCE1__DSR_DCE1 IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_DTR_DCE1__DTR_DCE1 IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_DTR_DCE1__SRXDA IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_ALT2)
#define MX31_PIN_CTS2__CTS2 IOMUX_MODE(MX31_PIN_CTS2, IOMUX_CONFIG_FUNC)
#define MX31_PIN_RTS2__RTS2 IOMUX_MODE(MX31_PIN_RTS2, IOMUX_CONFIG_FUNC)
#define MX31_PIN_TXD2__TXD2 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_FUNC)
#define MX31_PIN_RXD2__RXD2 IOMUX_MODE(MX31_PIN_RXD2, IOMUX_CONFIG_FUNC)
#define MX31_PIN_DCD_DTE1__DCD_DTE2 IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT1)
#define MX31_PIN_RI_DTE1__RI_DTE2 IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT1)
#define MX31_PIN_DSR_DTE1__DSR_DTE2 IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_ALT1)
#define MX31_PIN_DTR_DTE1__DTR_DTE2 IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_OCONFIG_ALT3 | IOMUX_ICONFIG_NONE)
#define MX31_PIN_PC_RST__CTS5 IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT2)
#define MX31_PIN_PC_VS2__RTS5 IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT2)
#define MX31_PIN_PC_BVD2__TXD5 IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT2)
#define MX31_PIN_PC_BVD1__RXD5 IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT2)
#define MX31_PIN_CSPI1_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI1_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI1_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI1_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI1_SS0__SS0 IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI1_SS1__SS1 IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI1_SS2__SS2 IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI2_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI2_MOSI__SCL IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSPI2_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI2_MISO__SDA IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSPI2_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI2_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI2_SPI_RDY, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI2_SS0__SS0 IOMUX_MODE(MX31_PIN_CSPI2_SS0, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI2_SS1__SS1 IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI2_SS2__SS2 IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI3_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI3_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI3_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI3_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_FUNC)
#define MX31_PIN_BATT_LINE__OWIRE IOMUX_MODE(MX31_PIN_BATT_LINE, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CS4__CS4 IOMUX_MODE(MX31_PIN_CS4, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SD1_DATA3__SD1_DATA3 IOMUX_MODE(MX31_PIN_SD1_DATA3, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SD1_DATA2__SD1_DATA2 IOMUX_MODE(MX31_PIN_SD1_DATA2, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SD1_DATA1__SD1_DATA1 IOMUX_MODE(MX31_PIN_SD1_DATA1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SD1_DATA0__SD1_DATA0 IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SD1_CLK__SD1_CLK IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SD1_CMD__SD1_CMD IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC)
#define MX31_PIN_ATA_CS0__GPIO3_26 IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
#define MX31_PIN_ATA_CS1__GPIO3_27 IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
#define MX31_PIN_PC_PWRON__SD2_DATA3 IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
#define MX31_PIN_PC_VS1__SD2_DATA2 IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
#define MX31_PIN_PC_READY__SD2_DATA1 IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
#define MX31_PIN_PC_WAIT_B__SD2_DATA0 IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
#define MX31_PIN_PC_CD2_B__SD2_CLK IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
#define MX31_PIN_PC_CD1_B__SD2_CMD IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
#define MX31_PIN_ATA_DIOR__GPIO3_28 IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
#define MX31_PIN_ATA_DIOW__GPIO3_29 IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
#define MX31_PIN_LD0__LD0 IOMUX_MODE(MX31_PIN_LD0, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LD1__LD1 IOMUX_MODE(MX31_PIN_LD1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LD2__LD2 IOMUX_MODE(MX31_PIN_LD2, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LD3__LD3 IOMUX_MODE(MX31_PIN_LD3, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LD4__LD4 IOMUX_MODE(MX31_PIN_LD4, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LD5__LD5 IOMUX_MODE(MX31_PIN_LD5, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LD6__LD6 IOMUX_MODE(MX31_PIN_LD6, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LD7__LD7 IOMUX_MODE(MX31_PIN_LD7, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LD8__LD8 IOMUX_MODE(MX31_PIN_LD8, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LD9__LD9 IOMUX_MODE(MX31_PIN_LD9, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LD10__LD10 IOMUX_MODE(MX31_PIN_LD10, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LD11__LD11 IOMUX_MODE(MX31_PIN_LD11, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LD12__LD12 IOMUX_MODE(MX31_PIN_LD12, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LD13__LD13 IOMUX_MODE(MX31_PIN_LD13, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LD14__LD14 IOMUX_MODE(MX31_PIN_LD14, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LD15__LD15 IOMUX_MODE(MX31_PIN_LD15, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LD16__LD16 IOMUX_MODE(MX31_PIN_LD16, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LD17__LD17 IOMUX_MODE(MX31_PIN_LD17, IOMUX_CONFIG_FUNC)
#define MX31_PIN_VSYNC3__VSYNC3 IOMUX_MODE(MX31_PIN_VSYNC3, IOMUX_CONFIG_FUNC)
#define MX31_PIN_HSYNC__HSYNC IOMUX_MODE(MX31_PIN_HSYNC, IOMUX_CONFIG_FUNC)
#define MX31_PIN_FPSHIFT__FPSHIFT IOMUX_MODE(MX31_PIN_FPSHIFT, IOMUX_CONFIG_FUNC)
#define MX31_PIN_DRDY0__DRDY0 IOMUX_MODE(MX31_PIN_DRDY0, IOMUX_CONFIG_FUNC)
#define MX31_PIN_D3_REV__D3_REV IOMUX_MODE(MX31_PIN_D3_REV, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CONTRAST__CONTRAST IOMUX_MODE(MX31_PIN_CONTRAST, IOMUX_CONFIG_FUNC)
#define MX31_PIN_D3_SPL__D3_SPL IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC)
#define MX31_PIN_D3_CLS__D3_CLS IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC)
#define MX31_PIN_GPIO1_1__GPIO IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO)
#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
#define MX31_PIN_CSPI2_SS2__I2C3_SDA IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSPI2_SCLK__I2C3_SCL IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSI_D7__CSI_D7 IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSI_D8__CSI_D8 IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSI_D9__CSI_D9 IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSI_D10__CSI_D10 IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSI_D11__CSI_D11 IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSI_D12__CSI_D12 IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSI_D13__CSI_D13 IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSI_D14__CSI_D14 IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSI_D15__CSI_D15 IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSI_HSYNC__CSI_HSYNC IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSI_MCLK__CSI_MCLK IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSI_VSYNC__CSI_VSYNC IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
#define MX31_PIN_CSI_D4__GPIO3_4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_GPIO)
#define MX31_PIN_CSI_D5__GPIO3_5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO)
#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3 IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4 IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5 IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6 IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7 IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_CLK__USBOTG_CLK IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSPI1_MISO__USBH1_RXDP IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSPI1_SS0__USBH1_TXDM IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSPI1_SS1__USBH1_TXDP IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSPI1_SS2__USBH1_RCV IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSPI1_SCLK__USBH1_OEB IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
#define MX31_PIN_SFS6__USBH1_SUSPEND IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_FUNC)
#define MX31_PIN_NFRE_B__GPIO1_11 IOMUX_MODE(MX31_PIN_NFRE_B, IOMUX_CONFIG_GPIO)
#define MX31_PIN_NFALE__GPIO1_12 IOMUX_MODE(MX31_PIN_NFALE, IOMUX_CONFIG_GPIO)
#define MX31_PIN_USBH2_DATA0__USBH2_DATA0 IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBH2_DATA1__USBH2_DATA1 IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_STXD3__USBH2_DATA2 IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SRXD3__USBH2_DATA3 IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SCK3__USBH2_DATA4 IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SFS3__USBH2_DATA5 IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC)
#define MX31_PIN_STXD6__USBH2_DATA6 IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SRXD6__USBH2_DATA7 IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBH2_CLK__USBH2_CLK IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBH2_DIR__USBH2_DIR IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBH2_NXT__USBH2_NXT IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBH2_STP__USBH2_STP IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SCK6__GPIO1_25 IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO)
#define MX31_PIN_USB_OC__GPIO1_30 IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
#define MX31_PIN_I2C_DAT__I2C1_SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
#define MX31_PIN_I2C_CLK__I2C1_SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
#define MX31_PIN_GPIO1_0__GPIO1_0 IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO)
#define MX31_PIN_SVEN0__GPIO2_0 IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO)
#define MX31_PIN_STX0__GPIO2_1 IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO)
#define MX31_PIN_SRX0__GPIO2_2 IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO)
#define MX31_PIN_SIMPD0__GPIO2_3 IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO)
#define MX31_PIN_DTR_DCE1__GPIO2_8 IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO)
#define MX31_PIN_DSR_DCE1__GPIO2_9 IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_GPIO)
#define MX31_PIN_RI_DCE1__GPIO2_10 IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_GPIO)
#define MX31_PIN_DCD_DCE1__GPIO2_11 IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO)
#define MX31_PIN_STXD5__GPIO1_21 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
#define MX31_PIN_SRXD5__GPIO1_22 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
#define MX31_PIN_GPIO1_3__GPIO1_3 IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO)
#define MX31_PIN_CSPI2_SS1__CSPI3_SS1 IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_ALT1)
#define MX31_PIN_RTS1__GPIO2_6 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO)
#define MX31_PIN_CTS1__GPIO2_7 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO)
#define MX31_PIN_LCS0__GPIO3_23 IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
#define MX31_PIN_STXD4__STXD4 IOMUX_MODE(MX31_PIN_STXD4, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SRXD4__SRXD4 IOMUX_MODE(MX31_PIN_SRXD4, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SCK4__SCK4 IOMUX_MODE(MX31_PIN_SCK4, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SFS4__SFS4 IOMUX_MODE(MX31_PIN_SFS4, IOMUX_CONFIG_FUNC)
#define MX31_PIN_STXD5__STXD5 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SRXD5__SRXD5 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SCK5__SCK5 IOMUX_MODE(MX31_PIN_SCK5, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SFS5__SFS5 IOMUX_MODE(MX31_PIN_SFS5, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_ROW0_KEY_ROW0 IOMUX_MODE(MX31_PIN_KEY_ROW0, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_ROW1_KEY_ROW1 IOMUX_MODE(MX31_PIN_KEY_ROW1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_ROW2_KEY_ROW2 IOMUX_MODE(MX31_PIN_KEY_ROW2, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_ROW3_KEY_ROW3 IOMUX_MODE(MX31_PIN_KEY_ROW3, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_ROW4_KEY_ROW4 IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_ROW4_GPIO IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO)
#define MX31_PIN_KEY_ROW5_KEY_ROW5 IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_ROW6_KEY_ROW6 IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_ROW7_KEY_ROW7 IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_COL0_KEY_COL0 IOMUX_MODE(MX31_PIN_KEY_COL0, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_COL1_KEY_COL1 IOMUX_MODE(MX31_PIN_KEY_COL1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_COL2_KEY_COL2 IOMUX_MODE(MX31_PIN_KEY_COL2, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_COL3_KEY_COL3 IOMUX_MODE(MX31_PIN_KEY_COL3, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_COL4_KEY_COL4 IOMUX_MODE(MX31_PIN_KEY_COL4, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_COL5_KEY_COL5 IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_COL6_KEY_COL6 IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_COL7_KEY_COL7 IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_FUNC)
#define MX31_PIN_WATCHDOG_RST__WATCHDOG_RST IOMUX_MODE(MX31_PIN_WATCHDOG_RST, IOMUX_CONFIG_FUNC)
/*
* XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed with cspi2_ss0,
* cspi2_ss1, cspi1_ss0 cspi1_ss1
*/
/*
* This function configures the pad value for a IOMUX pin.
*/
void mxc_iomux_set_pad(enum iomux_pins, u32);
#endif /* ifndef __MACH_IOMUX_MX3_H__ */
arch/arm/mach-imx/iomux-mx35.h deleted 100644 → 0
View file @ a4f07008
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
*/
#ifndef __MACH_IOMUX_MX35_H__
#define __MACH_IOMUX_MX35_H__
#include "iomux-v3.h"
/*
* The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
* If <padname> or <padmode> refers to a GPIO, it is named
* GPIO_<unit>_<num> see also iomux-v3.h
*/
/* PAD MUX ALT INPSE PATH */
#define MX35_PAD_CAPTURE__GPT_CAPIN1 IOMUX_PAD(0x328, 0x004, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CAPTURE__GPT_CMPOUT2 IOMUX_PAD(0x328, 0x004, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CAPTURE__CSPI2_SS1 IOMUX_PAD(0x328, 0x004, 2, 0x7f4, 0, NO_PAD_CTRL)
#define MX35_PAD_CAPTURE__EPIT1_EPITO IOMUX_PAD(0x328, 0x004, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CAPTURE__CCM_CLK32K IOMUX_PAD(0x328, 0x004, 4, 0x7d0, 0, NO_PAD_CTRL)
#define MX35_PAD_CAPTURE__GPIO1_4 IOMUX_PAD(0x328, 0x004, 5, 0x850, 0, NO_PAD_CTRL)
#define MX35_PAD_COMPARE__GPT_CMPOUT1 IOMUX_PAD(0x32c, 0x008, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_COMPARE__GPT_CAPIN2 IOMUX_PAD(0x32c, 0x008, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_COMPARE__GPT_CMPOUT3 IOMUX_PAD(0x32c, 0x008, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_COMPARE__EPIT2_EPITO IOMUX_PAD(0x32c, 0x008, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_COMPARE__GPIO1_5 IOMUX_PAD(0x32c, 0x008, 5, 0x854, 0, NO_PAD_CTRL)
#define MX35_PAD_COMPARE__SDMA_EXTDMA_2 IOMUX_PAD(0x32c, 0x008, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_WDOG_RST__WDOG_WDOG_B IOMUX_PAD(0x330, 0x00c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE IOMUX_PAD(0x330, 0x00c, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_WDOG_RST__GPIO1_6 IOMUX_PAD(0x330, 0x00c, 5, 0x858, 0, NO_PAD_CTRL)
#define MX35_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x334, 0x010, 0, 0x82c, 0, NO_PAD_CTRL)
#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY IOMUX_PAD(0x334, 0x010, 1, 0x7d4, 0, NO_PAD_CTRL)
#define MX35_PAD_GPIO1_0__OWIRE_LINE IOMUX_PAD(0x334, 0x010, 2, 0x990, 0, NO_PAD_CTRL)
#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0 IOMUX_PAD(0x334, 0x010, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x338, 0x014, 0, 0x838, 0, NO_PAD_CTRL)
#define MX35_PAD_GPIO1_1__PWM_PWMO IOMUX_PAD(0x338, 0x014, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_GPIO1_1__CSPI1_SS2 IOMUX_PAD(0x338, 0x014, 3, 0x7d8, 0, NO_PAD_CTRL)
#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT IOMUX_PAD(0x338, 0x014, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1 IOMUX_PAD(0x338, 0x014, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_GPIO2_0__GPIO2_0 IOMUX_PAD(0x33c, 0x018, 0, 0x868, 0, NO_PAD_CTRL)
#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK IOMUX_PAD(0x33c, 0x018, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_GPIO3_0__GPIO3_0 IOMUX_PAD(0x340, 0x01c, 0, 0x8e8, 0, NO_PAD_CTRL)
#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK IOMUX_PAD(0x340, 0x01c, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B IOMUX_PAD(0x344, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_POR_B__CCM_POR_B IOMUX_PAD(0x348, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CLKO__CCM_CLKO IOMUX_PAD(0x34c, 0x020, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CLKO__GPIO1_8 IOMUX_PAD(0x34c, 0x020, 5, 0x860, 0, NO_PAD_CTRL)
#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0 IOMUX_PAD(0x350, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1 IOMUX_PAD(0x354, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0 IOMUX_PAD(0x358, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1 IOMUX_PAD(0x35c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26 IOMUX_PAD(0x360, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_VSTBY__CCM_VSTBY IOMUX_PAD(0x364, 0x024, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_VSTBY__GPIO1_7 IOMUX_PAD(0x364, 0x024, 5, 0x85c, 0, NO_PAD_CTRL)
#define MX35_PAD_A0__EMI_EIM_DA_L_0 IOMUX_PAD(0x368, 0x028, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A1__EMI_EIM_DA_L_1 IOMUX_PAD(0x36c, 0x02c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A2__EMI_EIM_DA_L_2 IOMUX_PAD(0x370, 0x030, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A3__EMI_EIM_DA_L_3 IOMUX_PAD(0x374, 0x034, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A4__EMI_EIM_DA_L_4 IOMUX_PAD(0x378, 0x038, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A5__EMI_EIM_DA_L_5 IOMUX_PAD(0x37c, 0x03c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A6__EMI_EIM_DA_L_6 IOMUX_PAD(0x380, 0x040, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A7__EMI_EIM_DA_L_7 IOMUX_PAD(0x384, 0x044, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A8__EMI_EIM_DA_H_8 IOMUX_PAD(0x388, 0x048, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A9__EMI_EIM_DA_H_9 IOMUX_PAD(0x38c, 0x04c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A10__EMI_EIM_DA_H_10 IOMUX_PAD(0x390, 0x050, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_MA10__EMI_MA10 IOMUX_PAD(0x394, 0x054, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A11__EMI_EIM_DA_H_11 IOMUX_PAD(0x398, 0x058, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A12__EMI_EIM_DA_H_12 IOMUX_PAD(0x39c, 0x05c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A13__EMI_EIM_DA_H_13 IOMUX_PAD(0x3a0, 0x060, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A14__EMI_EIM_DA_H2_14 IOMUX_PAD(0x3a4, 0x064, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A15__EMI_EIM_DA_H2_15 IOMUX_PAD(0x3a8, 0x068, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A16__EMI_EIM_A_16 IOMUX_PAD(0x3ac, 0x06c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A17__EMI_EIM_A_17 IOMUX_PAD(0x3b0, 0x070, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A18__EMI_EIM_A_18 IOMUX_PAD(0x3b4, 0x074, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A19__EMI_EIM_A_19 IOMUX_PAD(0x3b8, 0x078, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A20__EMI_EIM_A_20 IOMUX_PAD(0x3bc, 0x07c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A21__EMI_EIM_A_21 IOMUX_PAD(0x3c0, 0x080, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A22__EMI_EIM_A_22 IOMUX_PAD(0x3c4, 0x084, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A23__EMI_EIM_A_23 IOMUX_PAD(0x3c8, 0x088, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A24__EMI_EIM_A_24 IOMUX_PAD(0x3cc, 0x08c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_A25__EMI_EIM_A_25 IOMUX_PAD(0x3d0, 0x090, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SDBA1__EMI_EIM_SDBA1 IOMUX_PAD(0x3d4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SDBA0__EMI_EIM_SDBA0 IOMUX_PAD(0x3d8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD0__EMI_DRAM_D_0 IOMUX_PAD(0x3dc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1__EMI_DRAM_D_1 IOMUX_PAD(0x3e0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD2__EMI_DRAM_D_2 IOMUX_PAD(0x3e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD3__EMI_DRAM_D_3 IOMUX_PAD(0x3e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD4__EMI_DRAM_D_4 IOMUX_PAD(0x3ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD5__EMI_DRAM_D_5 IOMUX_PAD(0x3f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD6__EMI_DRAM_D_6 IOMUX_PAD(0x3f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD7__EMI_DRAM_D_7 IOMUX_PAD(0x3f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD8__EMI_DRAM_D_8 IOMUX_PAD(0x3fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD9__EMI_DRAM_D_9 IOMUX_PAD(0x400, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD10__EMI_DRAM_D_10 IOMUX_PAD(0x404, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD11__EMI_DRAM_D_11 IOMUX_PAD(0x408, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD12__EMI_DRAM_D_12 IOMUX_PAD(0x40c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD13__EMI_DRAM_D_13 IOMUX_PAD(0x410, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD14__EMI_DRAM_D_14 IOMUX_PAD(0x414, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD15__EMI_DRAM_D_15 IOMUX_PAD(0x418, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD16__EMI_DRAM_D_16 IOMUX_PAD(0x41c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD17__EMI_DRAM_D_17 IOMUX_PAD(0x420, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD18__EMI_DRAM_D_18 IOMUX_PAD(0x424, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD19__EMI_DRAM_D_19 IOMUX_PAD(0x428, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD20__EMI_DRAM_D_20 IOMUX_PAD(0x42c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD21__EMI_DRAM_D_21 IOMUX_PAD(0x430, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD22__EMI_DRAM_D_22 IOMUX_PAD(0x434, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD23__EMI_DRAM_D_23 IOMUX_PAD(0x438, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD24__EMI_DRAM_D_24 IOMUX_PAD(0x43c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD25__EMI_DRAM_D_25 IOMUX_PAD(0x440, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD26__EMI_DRAM_D_26 IOMUX_PAD(0x444, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD27__EMI_DRAM_D_27 IOMUX_PAD(0x448, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD28__EMI_DRAM_D_28 IOMUX_PAD(0x44c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD29__EMI_DRAM_D_29 IOMUX_PAD(0x450, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD30__EMI_DRAM_D_30 IOMUX_PAD(0x454, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD31__EMI_DRAM_D_31 IOMUX_PAD(0x458, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_DQM0__EMI_DRAM_DQM_0 IOMUX_PAD(0x45c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_DQM1__EMI_DRAM_DQM_1 IOMUX_PAD(0x460, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_DQM2__EMI_DRAM_DQM_2 IOMUX_PAD(0x464, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_DQM3__EMI_DRAM_DQM_3 IOMUX_PAD(0x468, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_EB0__EMI_EIM_EB0_B IOMUX_PAD(0x46c, 0x094, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_EB1__EMI_EIM_EB1_B IOMUX_PAD(0x470, 0x098, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_OE__EMI_EIM_OE IOMUX_PAD(0x474, 0x09c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CS0__EMI_EIM_CS0 IOMUX_PAD(0x478, 0x0a0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CS1__EMI_EIM_CS1 IOMUX_PAD(0x47c, 0x0a4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CS1__EMI_NANDF_CE3 IOMUX_PAD(0x47c, 0x0a4, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CS2__EMI_EIM_CS2 IOMUX_PAD(0x480, 0x0a8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CS3__EMI_EIM_CS3 IOMUX_PAD(0x484, 0x0ac, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CS4__EMI_EIM_CS4 IOMUX_PAD(0x488, 0x0b0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CS4__EMI_DTACK_B IOMUX_PAD(0x488, 0x0b0, 1, 0x800, 0, NO_PAD_CTRL)
#define MX35_PAD_CS4__EMI_NANDF_CE1 IOMUX_PAD(0x488, 0x0b0, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CS4__GPIO1_20 IOMUX_PAD(0x488, 0x0b0, 5, 0x83c, 0, NO_PAD_CTRL)
#define MX35_PAD_CS5__EMI_EIM_CS5 IOMUX_PAD(0x48c, 0x0b4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CS5__CSPI2_SS2 IOMUX_PAD(0x48c, 0x0b4, 1, 0x7f8, 0, NO_PAD_CTRL)
#define MX35_PAD_CS5__CSPI1_SS2 IOMUX_PAD(0x48c, 0x0b4, 2, 0x7d8, 1, NO_PAD_CTRL)
#define MX35_PAD_CS5__EMI_NANDF_CE2 IOMUX_PAD(0x48c, 0x0b4, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CS5__GPIO1_21 IOMUX_PAD(0x48c, 0x0b4, 5, 0x840, 0, NO_PAD_CTRL)
#define MX35_PAD_NF_CE0__EMI_NANDF_CE0 IOMUX_PAD(0x490, 0x0b8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_NF_CE0__GPIO1_22 IOMUX_PAD(0x490, 0x0b8, 5, 0x844, 0, NO_PAD_CTRL)
#define MX35_PAD_ECB__EMI_EIM_ECB IOMUX_PAD(0x494, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LBA__EMI_EIM_LBA IOMUX_PAD(0x498, 0x0bc, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_BCLK__EMI_EIM_BCLK IOMUX_PAD(0x49c, 0x0c0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_RW__EMI_EIM_RW IOMUX_PAD(0x4a0, 0x0c4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_RAS__EMI_DRAM_RAS IOMUX_PAD(0x4a4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CAS__EMI_DRAM_CAS IOMUX_PAD(0x4a8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SDWE__EMI_DRAM_SDWE IOMUX_PAD(0x4ac, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0 IOMUX_PAD(0x4b0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1 IOMUX_PAD(0x4b4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK IOMUX_PAD(0x4b8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0 IOMUX_PAD(0x4bc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1 IOMUX_PAD(0x4c0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2 IOMUX_PAD(0x4c4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3 IOMUX_PAD(0x4c8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B IOMUX_PAD(0x4cc, 0x0c8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3 IOMUX_PAD(0x4cc, 0x0c8, 1, 0x9d8, 0, NO_PAD_CTRL)
#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x4cc, 0x0c8, 2, 0x924, 0, NO_PAD_CTRL)
#define MX35_PAD_NFWE_B__GPIO2_18 IOMUX_PAD(0x4cc, 0x0c8, 5, 0x88c, 0, NO_PAD_CTRL)
#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0 IOMUX_PAD(0x4cc, 0x0c8, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B IOMUX_PAD(0x4d0, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR IOMUX_PAD(0x4d0, 0x0cc, 1, 0x9ec, 0, NO_PAD_CTRL)
#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK IOMUX_PAD(0x4d0, 0x0cc, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_NFRE_B__GPIO2_19 IOMUX_PAD(0x4d0, 0x0cc, 5, 0x890, 0, NO_PAD_CTRL)
#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1 IOMUX_PAD(0x4d0, 0x0cc, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_NFALE__EMI_NANDF_ALE IOMUX_PAD(0x4d4, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_NFALE__USB_TOP_USBH2_STP IOMUX_PAD(0x4d4, 0x0d0, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_NFALE__IPU_DISPB_CS0 IOMUX_PAD(0x4d4, 0x0d0, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_NFALE__GPIO2_20 IOMUX_PAD(0x4d4, 0x0d0, 5, 0x898, 0, NO_PAD_CTRL)
#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2 IOMUX_PAD(0x4d4, 0x0d0, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_NFCLE__EMI_NANDF_CLE IOMUX_PAD(0x4d8, 0x0d4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT IOMUX_PAD(0x4d8, 0x0d4, 1, 0x9f0, 0, NO_PAD_CTRL)
#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS IOMUX_PAD(0x4d8, 0x0d4, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_NFCLE__GPIO2_21 IOMUX_PAD(0x4d8, 0x0d4, 5, 0x89c, 0, NO_PAD_CTRL)
#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3 IOMUX_PAD(0x4d8, 0x0d4, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B IOMUX_PAD(0x4dc, 0x0d8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7 IOMUX_PAD(0x4dc, 0x0d8, 1, 0x9e8, 0, NO_PAD_CTRL)
#define MX35_PAD_NFWP_B__IPU_DISPB_WR IOMUX_PAD(0x4dc, 0x0d8, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_NFWP_B__GPIO2_22 IOMUX_PAD(0x4dc, 0x0d8, 5, 0x8a0, 0, NO_PAD_CTRL)
#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL IOMUX_PAD(0x4dc, 0x0d8, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_NFRB__EMI_NANDF_RB IOMUX_PAD(0x4e0, 0x0dc, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_NFRB__IPU_DISPB_RD IOMUX_PAD(0x4e0, 0x0dc, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_NFRB__GPIO2_23 IOMUX_PAD(0x4e0, 0x0dc, 5, 0x8a4, 0, NO_PAD_CTRL)
#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK IOMUX_PAD(0x4e0, 0x0dc, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D15__EMI_EIM_D_15 IOMUX_PAD(0x4e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D14__EMI_EIM_D_14 IOMUX_PAD(0x4e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D13__EMI_EIM_D_13 IOMUX_PAD(0x4ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D12__EMI_EIM_D_12 IOMUX_PAD(0x4f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D11__EMI_EIM_D_11 IOMUX_PAD(0x4f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D10__EMI_EIM_D_10 IOMUX_PAD(0x4f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D9__EMI_EIM_D_9 IOMUX_PAD(0x4fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D8__EMI_EIM_D_8 IOMUX_PAD(0x500, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D7__EMI_EIM_D_7 IOMUX_PAD(0x504, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D6__EMI_EIM_D_6 IOMUX_PAD(0x508, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D5__EMI_EIM_D_5 IOMUX_PAD(0x50c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D4__EMI_EIM_D_4 IOMUX_PAD(0x510, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3__EMI_EIM_D_3 IOMUX_PAD(0x514, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D2__EMI_EIM_D_2 IOMUX_PAD(0x518, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D1__EMI_EIM_D_1 IOMUX_PAD(0x51c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D0__EMI_EIM_D_0 IOMUX_PAD(0x520, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_D8__IPU_CSI_D_8 IOMUX_PAD(0x524, 0x0e0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_D8__KPP_COL_0 IOMUX_PAD(0x524, 0x0e0, 1, 0x950, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_D8__GPIO1_20 IOMUX_PAD(0x524, 0x0e0, 5, 0x83c, 1, NO_PAD_CTRL)
#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13 IOMUX_PAD(0x524, 0x0e0, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_D9__IPU_CSI_D_9 IOMUX_PAD(0x528, 0x0e4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_D9__KPP_COL_1 IOMUX_PAD(0x528, 0x0e4, 1, 0x954, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_D9__GPIO1_21 IOMUX_PAD(0x528, 0x0e4, 5, 0x840, 1, NO_PAD_CTRL)
#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14 IOMUX_PAD(0x528, 0x0e4, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_D10__IPU_CSI_D_10 IOMUX_PAD(0x52c, 0x0e8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_D10__KPP_COL_2 IOMUX_PAD(0x52c, 0x0e8, 1, 0x958, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_D10__GPIO1_22 IOMUX_PAD(0x52c, 0x0e8, 5, 0x844, 1, NO_PAD_CTRL)
#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15 IOMUX_PAD(0x52c, 0x0e8, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_D11__IPU_CSI_D_11 IOMUX_PAD(0x530, 0x0ec, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_D11__KPP_COL_3 IOMUX_PAD(0x530, 0x0ec, 1, 0x95c, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_D11__GPIO1_23 IOMUX_PAD(0x530, 0x0ec, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_D12__IPU_CSI_D_12 IOMUX_PAD(0x534, 0x0f0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_D12__KPP_ROW_0 IOMUX_PAD(0x534, 0x0f0, 1, 0x970, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_D12__GPIO1_24 IOMUX_PAD(0x534, 0x0f0, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_D13__IPU_CSI_D_13 IOMUX_PAD(0x538, 0x0f4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_D13__KPP_ROW_1 IOMUX_PAD(0x538, 0x0f4, 1, 0x974, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_D13__GPIO1_25 IOMUX_PAD(0x538, 0x0f4, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_D14__IPU_CSI_D_14 IOMUX_PAD(0x53c, 0x0f8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_D14__KPP_ROW_2 IOMUX_PAD(0x53c, 0x0f8, 1, 0x978, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_D14__GPIO1_26 IOMUX_PAD(0x53c, 0x0f8, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_D15__IPU_CSI_D_15 IOMUX_PAD(0x540, 0x0fc, 0, 0x97c, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_D15__KPP_ROW_3 IOMUX_PAD(0x540, 0x0fc, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_D15__GPIO1_27 IOMUX_PAD(0x540, 0x0fc, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK IOMUX_PAD(0x544, 0x100, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_MCLK__GPIO1_28 IOMUX_PAD(0x544, 0x100, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC IOMUX_PAD(0x548, 0x104, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_VSYNC__GPIO1_29 IOMUX_PAD(0x548, 0x104, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC IOMUX_PAD(0x54c, 0x108, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_HSYNC__GPIO1_30 IOMUX_PAD(0x54c, 0x108, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK IOMUX_PAD(0x550, 0x10c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSI_PIXCLK__GPIO1_31 IOMUX_PAD(0x550, 0x10c, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_I2C1_CLK__I2C1_SCL IOMUX_PAD(0x554, 0x110, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_I2C1_CLK__GPIO2_24 IOMUX_PAD(0x554, 0x110, 5, 0x8a8, 0, NO_PAD_CTRL)
#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK IOMUX_PAD(0x554, 0x110, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_I2C1_DAT__I2C1_SDA IOMUX_PAD(0x558, 0x114, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_I2C1_DAT__GPIO2_25 IOMUX_PAD(0x558, 0x114, 5, 0x8ac, 0, NO_PAD_CTRL)
#define MX35_PAD_I2C2_CLK__I2C2_SCL IOMUX_PAD(0x55c, 0x118, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_I2C2_CLK__CAN1_TXCAN IOMUX_PAD(0x55c, 0x118, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR IOMUX_PAD(0x55c, 0x118, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_I2C2_CLK__GPIO2_26 IOMUX_PAD(0x55c, 0x118, 5, 0x8b0, 0, NO_PAD_CTRL)
#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2 IOMUX_PAD(0x55c, 0x118, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_I2C2_DAT__I2C2_SDA IOMUX_PAD(0x560, 0x11c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_I2C2_DAT__CAN1_RXCAN IOMUX_PAD(0x560, 0x11c, 1, 0x7c8, 0, NO_PAD_CTRL)
#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC IOMUX_PAD(0x560, 0x11c, 2, 0x9f4, 0, NO_PAD_CTRL)
#define MX35_PAD_I2C2_DAT__GPIO2_27 IOMUX_PAD(0x560, 0x11c, 5, 0x8b4, 0, NO_PAD_CTRL)
#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3 IOMUX_PAD(0x560, 0x11c, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD IOMUX_PAD(0x564, 0x120, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_STXD4__GPIO2_28 IOMUX_PAD(0x564, 0x120, 5, 0x8b8, 0, NO_PAD_CTRL)
#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0 IOMUX_PAD(0x564, 0x120, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD IOMUX_PAD(0x568, 0x124, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SRXD4__GPIO2_29 IOMUX_PAD(0x568, 0x124, 5, 0x8bc, 0, NO_PAD_CTRL)
#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1 IOMUX_PAD(0x568, 0x124, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC IOMUX_PAD(0x56c, 0x128, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SCK4__GPIO2_30 IOMUX_PAD(0x56c, 0x128, 5, 0x8c4, 0, NO_PAD_CTRL)
#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2 IOMUX_PAD(0x56c, 0x128, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS IOMUX_PAD(0x570, 0x12c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_STXFS4__GPIO2_31 IOMUX_PAD(0x570, 0x12c, 5, 0x8c8, 0, NO_PAD_CTRL)
#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3 IOMUX_PAD(0x570, 0x12c, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD IOMUX_PAD(0x574, 0x130, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x574, 0x130, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_STXD5__CSPI2_MOSI IOMUX_PAD(0x574, 0x130, 2, 0x7ec, 0, NO_PAD_CTRL)
#define MX35_PAD_STXD5__GPIO1_0 IOMUX_PAD(0x574, 0x130, 5, 0x82c, 1, NO_PAD_CTRL)
#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4 IOMUX_PAD(0x574, 0x130, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD IOMUX_PAD(0x578, 0x134, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1 IOMUX_PAD(0x578, 0x134, 1, 0x998, 0, NO_PAD_CTRL)
#define MX35_PAD_SRXD5__CSPI2_MISO IOMUX_PAD(0x578, 0x134, 2, 0x7e8, 0, NO_PAD_CTRL)
#define MX35_PAD_SRXD5__GPIO1_1 IOMUX_PAD(0x578, 0x134, 5, 0x838, 1, NO_PAD_CTRL)
#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5 IOMUX_PAD(0x578, 0x134, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC IOMUX_PAD(0x57c, 0x138, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x57c, 0x138, 1, 0x994, 0, NO_PAD_CTRL)
#define MX35_PAD_SCK5__CSPI2_SCLK IOMUX_PAD(0x57c, 0x138, 2, 0x7e0, 0, NO_PAD_CTRL)
#define MX35_PAD_SCK5__GPIO1_2 IOMUX_PAD(0x57c, 0x138, 5, 0x848, 0, NO_PAD_CTRL)
#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6 IOMUX_PAD(0x57c, 0x138, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS IOMUX_PAD(0x580, 0x13c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_STXFS5__CSPI2_RDY IOMUX_PAD(0x580, 0x13c, 2, 0x7e4, 0, NO_PAD_CTRL)
#define MX35_PAD_STXFS5__GPIO1_3 IOMUX_PAD(0x580, 0x13c, 5, 0x84c, 0, NO_PAD_CTRL)
#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7 IOMUX_PAD(0x580, 0x13c, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SCKR__ESAI_SCKR IOMUX_PAD(0x584, 0x140, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SCKR__GPIO1_4 IOMUX_PAD(0x584, 0x140, 5, 0x850, 1, NO_PAD_CTRL)
#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10 IOMUX_PAD(0x584, 0x140, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FSR__ESAI_FSR IOMUX_PAD(0x588, 0x144, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FSR__GPIO1_5 IOMUX_PAD(0x588, 0x144, 5, 0x854, 1, NO_PAD_CTRL)
#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11 IOMUX_PAD(0x588, 0x144, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_HCKR__ESAI_HCKR IOMUX_PAD(0x58c, 0x148, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS IOMUX_PAD(0x58c, 0x148, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_HCKR__CSPI2_SS0 IOMUX_PAD(0x58c, 0x148, 2, 0x7f0, 0, NO_PAD_CTRL)
#define MX35_PAD_HCKR__IPU_FLASH_STROBE IOMUX_PAD(0x58c, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_HCKR__GPIO1_6 IOMUX_PAD(0x58c, 0x148, 5, 0x858, 1, NO_PAD_CTRL)
#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12 IOMUX_PAD(0x58c, 0x148, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SCKT__ESAI_SCKT IOMUX_PAD(0x590, 0x14c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SCKT__GPIO1_7 IOMUX_PAD(0x590, 0x14c, 5, 0x85c, 1, NO_PAD_CTRL)
#define MX35_PAD_SCKT__IPU_CSI_D_0 IOMUX_PAD(0x590, 0x14c, 6, 0x930, 0, NO_PAD_CTRL)
#define MX35_PAD_SCKT__KPP_ROW_2 IOMUX_PAD(0x590, 0x14c, 7, 0x978, 1, NO_PAD_CTRL)
#define MX35_PAD_FST__ESAI_FST IOMUX_PAD(0x594, 0x150, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FST__GPIO1_8 IOMUX_PAD(0x594, 0x150, 5, 0x860, 1, NO_PAD_CTRL)
#define MX35_PAD_FST__IPU_CSI_D_1 IOMUX_PAD(0x594, 0x150, 6, 0x934, 0, NO_PAD_CTRL)
#define MX35_PAD_FST__KPP_ROW_3 IOMUX_PAD(0x594, 0x150, 7, 0x97c, 1, NO_PAD_CTRL)
#define MX35_PAD_HCKT__ESAI_HCKT IOMUX_PAD(0x598, 0x154, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC IOMUX_PAD(0x598, 0x154, 1, 0x7a8, 0, NO_PAD_CTRL)
#define MX35_PAD_HCKT__GPIO1_9 IOMUX_PAD(0x598, 0x154, 5, 0x864, 0, NO_PAD_CTRL)
#define MX35_PAD_HCKT__IPU_CSI_D_2 IOMUX_PAD(0x598, 0x154, 6, 0x938, 0, NO_PAD_CTRL)
#define MX35_PAD_HCKT__KPP_COL_3 IOMUX_PAD(0x598, 0x154, 7, 0x95c, 1, NO_PAD_CTRL)
#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0 IOMUX_PAD(0x59c, 0x158, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC IOMUX_PAD(0x59c, 0x158, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TX5_RX0__CSPI2_SS2 IOMUX_PAD(0x59c, 0x158, 2, 0x7f8, 1, NO_PAD_CTRL)
#define MX35_PAD_TX5_RX0__CAN2_TXCAN IOMUX_PAD(0x59c, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TX5_RX0__UART2_DTR IOMUX_PAD(0x59c, 0x158, 4, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TX5_RX0__GPIO1_10 IOMUX_PAD(0x59c, 0x158, 5, 0x830, 0, NO_PAD_CTRL)
#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0 IOMUX_PAD(0x59c, 0x158, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1 IOMUX_PAD(0x5a0, 0x15c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS IOMUX_PAD(0x5a0, 0x15c, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TX4_RX1__CSPI2_SS3 IOMUX_PAD(0x5a0, 0x15c, 2, 0x7fc, 0, NO_PAD_CTRL)
#define MX35_PAD_TX4_RX1__CAN2_RXCAN IOMUX_PAD(0x5a0, 0x15c, 3, 0x7cc, 0, NO_PAD_CTRL)
#define MX35_PAD_TX4_RX1__UART2_DSR IOMUX_PAD(0x5a0, 0x15c, 4, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TX4_RX1__GPIO1_11 IOMUX_PAD(0x5a0, 0x15c, 5, 0x834, 0, NO_PAD_CTRL)
#define MX35_PAD_TX4_RX1__IPU_CSI_D_3 IOMUX_PAD(0x5a0, 0x15c, 6, 0x93c, 0, NO_PAD_CTRL)
#define MX35_PAD_TX4_RX1__KPP_ROW_0 IOMUX_PAD(0x5a0, 0x15c, 7, 0x970, 1, NO_PAD_CTRL)
#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2 IOMUX_PAD(0x5a4, 0x160, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TX3_RX2__I2C3_SCL IOMUX_PAD(0x5a4, 0x160, 1, 0x91c, 0, NO_PAD_CTRL)
#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1 IOMUX_PAD(0x5a4, 0x160, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TX3_RX2__GPIO1_12 IOMUX_PAD(0x5a4, 0x160, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TX3_RX2__IPU_CSI_D_4 IOMUX_PAD(0x5a4, 0x160, 6, 0x940, 0, NO_PAD_CTRL)
#define MX35_PAD_TX3_RX2__KPP_ROW_1 IOMUX_PAD(0x5a4, 0x160, 7, 0x974, 1, NO_PAD_CTRL)
#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3 IOMUX_PAD(0x5a8, 0x164, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TX2_RX3__I2C3_SDA IOMUX_PAD(0x5a8, 0x164, 1, 0x920, 0, NO_PAD_CTRL)
#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2 IOMUX_PAD(0x5a8, 0x164, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TX2_RX3__GPIO1_13 IOMUX_PAD(0x5a8, 0x164, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TX2_RX3__IPU_CSI_D_5 IOMUX_PAD(0x5a8, 0x164, 6, 0x944, 0, NO_PAD_CTRL)
#define MX35_PAD_TX2_RX3__KPP_COL_0 IOMUX_PAD(0x5a8, 0x164, 7, 0x950, 1, NO_PAD_CTRL)
#define MX35_PAD_TX1__ESAI_TX1 IOMUX_PAD(0x5ac, 0x168, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TX1__CCM_PMIC_RDY IOMUX_PAD(0x5ac, 0x168, 1, 0x7d4, 1, NO_PAD_CTRL)
#define MX35_PAD_TX1__CSPI1_SS2 IOMUX_PAD(0x5ac, 0x168, 2, 0x7d8, 2, NO_PAD_CTRL)
#define MX35_PAD_TX1__EMI_NANDF_CE3 IOMUX_PAD(0x5ac, 0x168, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TX1__UART2_RI IOMUX_PAD(0x5ac, 0x168, 4, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TX1__GPIO1_14 IOMUX_PAD(0x5ac, 0x168, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TX1__IPU_CSI_D_6 IOMUX_PAD(0x5ac, 0x168, 6, 0x948, 0, NO_PAD_CTRL)
#define MX35_PAD_TX1__KPP_COL_1 IOMUX_PAD(0x5ac, 0x168, 7, 0x954, 1, NO_PAD_CTRL)
#define MX35_PAD_TX0__ESAI_TX0 IOMUX_PAD(0x5b0, 0x16c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x5b0, 0x16c, 1, 0x994, 1, NO_PAD_CTRL)
#define MX35_PAD_TX0__CSPI1_SS3 IOMUX_PAD(0x5b0, 0x16c, 2, 0x7dc, 0, NO_PAD_CTRL)
#define MX35_PAD_TX0__EMI_DTACK_B IOMUX_PAD(0x5b0, 0x16c, 3, 0x800, 1, NO_PAD_CTRL)
#define MX35_PAD_TX0__UART2_DCD IOMUX_PAD(0x5b0, 0x16c, 4, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TX0__GPIO1_15 IOMUX_PAD(0x5b0, 0x16c, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TX0__IPU_CSI_D_7 IOMUX_PAD(0x5b0, 0x16c, 6, 0x94c, 0, NO_PAD_CTRL)
#define MX35_PAD_TX0__KPP_COL_2 IOMUX_PAD(0x5b0, 0x16c, 7, 0x958, 1, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI IOMUX_PAD(0x5b4, 0x170, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_MOSI__GPIO1_16 IOMUX_PAD(0x5b4, 0x170, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2 IOMUX_PAD(0x5b4, 0x170, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_MISO__CSPI1_MISO IOMUX_PAD(0x5b8, 0x174, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_MISO__GPIO1_17 IOMUX_PAD(0x5b8, 0x174, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3 IOMUX_PAD(0x5b8, 0x174, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_SS0__CSPI1_SS0 IOMUX_PAD(0x5bc, 0x178, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_SS0__OWIRE_LINE IOMUX_PAD(0x5bc, 0x178, 1, 0x990, 1, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_SS0__CSPI2_SS3 IOMUX_PAD(0x5bc, 0x178, 2, 0x7fc, 1, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_SS0__GPIO1_18 IOMUX_PAD(0x5bc, 0x178, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4 IOMUX_PAD(0x5bc, 0x178, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_SS1__CSPI1_SS1 IOMUX_PAD(0x5c0, 0x17c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_SS1__PWM_PWMO IOMUX_PAD(0x5c0, 0x17c, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_SS1__CCM_CLK32K IOMUX_PAD(0x5c0, 0x17c, 2, 0x7d0, 1, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_SS1__GPIO1_19 IOMUX_PAD(0x5c0, 0x17c, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29 IOMUX_PAD(0x5c0, 0x17c, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5 IOMUX_PAD(0x5c0, 0x17c, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK IOMUX_PAD(0x5c4, 0x180, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_SCLK__GPIO3_4 IOMUX_PAD(0x5c4, 0x180, 5, 0x904, 0, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30 IOMUX_PAD(0x5c4, 0x180, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1 IOMUX_PAD(0x5c4, 0x180, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY IOMUX_PAD(0x5c8, 0x184, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5 IOMUX_PAD(0x5c8, 0x184, 5, 0x908, 0, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31 IOMUX_PAD(0x5c8, 0x184, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2 IOMUX_PAD(0x5c8, 0x184, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_RXD1__UART1_RXD_MUX IOMUX_PAD(0x5cc, 0x188, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_RXD1__CSPI2_MOSI IOMUX_PAD(0x5cc, 0x188, 1, 0x7ec, 1, NO_PAD_CTRL)
#define MX35_PAD_RXD1__KPP_COL_4 IOMUX_PAD(0x5cc, 0x188, 4, 0x960, 0, NO_PAD_CTRL)
#define MX35_PAD_RXD1__GPIO3_6 IOMUX_PAD(0x5cc, 0x188, 5, 0x90c, 0, NO_PAD_CTRL)
#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16 IOMUX_PAD(0x5cc, 0x188, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TXD1__UART1_TXD_MUX IOMUX_PAD(0x5d0, 0x18c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TXD1__CSPI2_MISO IOMUX_PAD(0x5d0, 0x18c, 1, 0x7e8, 1, NO_PAD_CTRL)
#define MX35_PAD_TXD1__KPP_COL_5 IOMUX_PAD(0x5d0, 0x18c, 4, 0x964, 0, NO_PAD_CTRL)
#define MX35_PAD_TXD1__GPIO3_7 IOMUX_PAD(0x5d0, 0x18c, 5, 0x910, 0, NO_PAD_CTRL)
#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17 IOMUX_PAD(0x5d0, 0x18c, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_RTS1__UART1_RTS IOMUX_PAD(0x5d4, 0x190, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_RTS1__CSPI2_SCLK IOMUX_PAD(0x5d4, 0x190, 1, 0x7e0, 1, NO_PAD_CTRL)
#define MX35_PAD_RTS1__I2C3_SCL IOMUX_PAD(0x5d4, 0x190, 2, 0x91c, 1, NO_PAD_CTRL)
#define MX35_PAD_RTS1__IPU_CSI_D_0 IOMUX_PAD(0x5d4, 0x190, 3, 0x930, 1, NO_PAD_CTRL)
#define MX35_PAD_RTS1__KPP_COL_6 IOMUX_PAD(0x5d4, 0x190, 4, 0x968, 0, NO_PAD_CTRL)
#define MX35_PAD_RTS1__GPIO3_8 IOMUX_PAD(0x5d4, 0x190, 5, 0x914, 0, NO_PAD_CTRL)
#define MX35_PAD_RTS1__EMI_NANDF_CE1 IOMUX_PAD(0x5d4, 0x190, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18 IOMUX_PAD(0x5d4, 0x190, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CTS1__UART1_CTS IOMUX_PAD(0x5d8, 0x194, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CTS1__CSPI2_RDY IOMUX_PAD(0x5d8, 0x194, 1, 0x7e4, 1, NO_PAD_CTRL)
#define MX35_PAD_CTS1__I2C3_SDA IOMUX_PAD(0x5d8, 0x194, 2, 0x920, 1, NO_PAD_CTRL)
#define MX35_PAD_CTS1__IPU_CSI_D_1 IOMUX_PAD(0x5d8, 0x194, 3, 0x934, 1, NO_PAD_CTRL)
#define MX35_PAD_CTS1__KPP_COL_7 IOMUX_PAD(0x5d8, 0x194, 4, 0x96c, 0, NO_PAD_CTRL)
#define MX35_PAD_CTS1__GPIO3_9 IOMUX_PAD(0x5d8, 0x194, 5, 0x918, 0, NO_PAD_CTRL)
#define MX35_PAD_CTS1__EMI_NANDF_CE2 IOMUX_PAD(0x5d8, 0x194, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19 IOMUX_PAD(0x5d8, 0x194, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_RXD2__UART2_RXD_MUX IOMUX_PAD(0x5dc, 0x198, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_RXD2__KPP_ROW_4 IOMUX_PAD(0x5dc, 0x198, 4, 0x980, 0, NO_PAD_CTRL)
#define MX35_PAD_RXD2__GPIO3_10 IOMUX_PAD(0x5dc, 0x198, 5, 0x8ec, 0, NO_PAD_CTRL)
#define MX35_PAD_TXD2__UART2_TXD_MUX IOMUX_PAD(0x5e0, 0x19c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x5e0, 0x19c, 1, 0x994, 2, NO_PAD_CTRL)
#define MX35_PAD_TXD2__KPP_ROW_5 IOMUX_PAD(0x5e0, 0x19c, 4, 0x984, 0, NO_PAD_CTRL)
#define MX35_PAD_TXD2__GPIO3_11 IOMUX_PAD(0x5e0, 0x19c, 5, 0x8f0, 0, NO_PAD_CTRL)
#define MX35_PAD_RTS2__UART2_RTS IOMUX_PAD(0x5e4, 0x1a0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1 IOMUX_PAD(0x5e4, 0x1a0, 1, 0x998, 1, NO_PAD_CTRL)
#define MX35_PAD_RTS2__CAN2_RXCAN IOMUX_PAD(0x5e4, 0x1a0, 2, 0x7cc, 1, NO_PAD_CTRL)
#define MX35_PAD_RTS2__IPU_CSI_D_2 IOMUX_PAD(0x5e4, 0x1a0, 3, 0x938, 1, NO_PAD_CTRL)
#define MX35_PAD_RTS2__KPP_ROW_6 IOMUX_PAD(0x5e4, 0x1a0, 4, 0x988, 0, NO_PAD_CTRL)
#define MX35_PAD_RTS2__GPIO3_12 IOMUX_PAD(0x5e4, 0x1a0, 5, 0x8f4, 0, NO_PAD_CTRL)
#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC IOMUX_PAD(0x5e4, 0x1a0, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_RTS2__UART3_RXD_MUX IOMUX_PAD(0x5e4, 0x1a0, 7, 0x9a0, 0, NO_PAD_CTRL)
#define MX35_PAD_CTS2__UART2_CTS IOMUX_PAD(0x5e8, 0x1a4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x5e8, 0x1a4, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CTS2__CAN2_TXCAN IOMUX_PAD(0x5e8, 0x1a4, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CTS2__IPU_CSI_D_3 IOMUX_PAD(0x5e8, 0x1a4, 3, 0x93c, 1, NO_PAD_CTRL)
#define MX35_PAD_CTS2__KPP_ROW_7 IOMUX_PAD(0x5e8, 0x1a4, 4, 0x98c, 0, NO_PAD_CTRL)
#define MX35_PAD_CTS2__GPIO3_13 IOMUX_PAD(0x5e8, 0x1a4, 5, 0x8f8, 0, NO_PAD_CTRL)
#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS IOMUX_PAD(0x5e8, 0x1a4, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CTS2__UART3_TXD_MUX IOMUX_PAD(0x5e8, 0x1a4, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_RTCK__ARM11P_TOP_RTCK IOMUX_PAD(0x5ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TCK__SJC_TCK IOMUX_PAD(0x5f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TMS__SJC_TMS IOMUX_PAD(0x5f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TDI__SJC_TDI IOMUX_PAD(0x5f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TDO__SJC_TDO IOMUX_PAD(0x5fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TRSTB__SJC_TRSTB IOMUX_PAD(0x600, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_DE_B__SJC_DE_B IOMUX_PAD(0x604, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SJC_MOD__SJC_MOD IOMUX_PAD(0x608, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR IOMUX_PAD(0x60c, 0x1a8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR IOMUX_PAD(0x60c, 0x1a8, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_USBOTG_PWR__GPIO3_14 IOMUX_PAD(0x60c, 0x1a8, 5, 0x8fc, 0, NO_PAD_CTRL)
#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC IOMUX_PAD(0x610, 0x1ac, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC IOMUX_PAD(0x610, 0x1ac, 1, 0x9f4, 1, NO_PAD_CTRL)
#define MX35_PAD_USBOTG_OC__GPIO3_15 IOMUX_PAD(0x610, 0x1ac, 5, 0x900, 0, NO_PAD_CTRL)
#define MX35_PAD_LD0__IPU_DISPB_DAT_0 IOMUX_PAD(0x614, 0x1b0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD0__GPIO2_0 IOMUX_PAD(0x614, 0x1b0, 5, 0x868, 1, NO_PAD_CTRL)
#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0 IOMUX_PAD(0x614, 0x1b0, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD1__IPU_DISPB_DAT_1 IOMUX_PAD(0x618, 0x1b4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD1__GPIO2_1 IOMUX_PAD(0x618, 0x1b4, 5, 0x894, 0, NO_PAD_CTRL)
#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1 IOMUX_PAD(0x618, 0x1b4, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD2__IPU_DISPB_DAT_2 IOMUX_PAD(0x61c, 0x1b8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD2__GPIO2_2 IOMUX_PAD(0x61c, 0x1b8, 5, 0x8c0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2 IOMUX_PAD(0x61c, 0x1b8, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD3__IPU_DISPB_DAT_3 IOMUX_PAD(0x620, 0x1bc, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD3__GPIO2_3 IOMUX_PAD(0x620, 0x1bc, 5, 0x8cc, 0, NO_PAD_CTRL)
#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3 IOMUX_PAD(0x620, 0x1bc, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD4__IPU_DISPB_DAT_4 IOMUX_PAD(0x624, 0x1c0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD4__GPIO2_4 IOMUX_PAD(0x624, 0x1c0, 5, 0x8d0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4 IOMUX_PAD(0x624, 0x1c0, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD5__IPU_DISPB_DAT_5 IOMUX_PAD(0x628, 0x1c4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD5__GPIO2_5 IOMUX_PAD(0x628, 0x1c4, 5, 0x8d4, 0, NO_PAD_CTRL)
#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5 IOMUX_PAD(0x628, 0x1c4, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD6__IPU_DISPB_DAT_6 IOMUX_PAD(0x62c, 0x1c8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD6__GPIO2_6 IOMUX_PAD(0x62c, 0x1c8, 5, 0x8d8, 0, NO_PAD_CTRL)
#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6 IOMUX_PAD(0x62c, 0x1c8, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD7__IPU_DISPB_DAT_7 IOMUX_PAD(0x630, 0x1cc, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD7__GPIO2_7 IOMUX_PAD(0x630, 0x1cc, 5, 0x8dc, 0, NO_PAD_CTRL)
#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7 IOMUX_PAD(0x630, 0x1cc, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD8__IPU_DISPB_DAT_8 IOMUX_PAD(0x634, 0x1d0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD8__GPIO2_8 IOMUX_PAD(0x634, 0x1d0, 5, 0x8e0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8 IOMUX_PAD(0x634, 0x1d0, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD9__IPU_DISPB_DAT_9 IOMUX_PAD(0x638, 0x1d4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD9__GPIO2_9 IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4, 0, NO_PAD_CTRL)
#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9 IOMUX_PAD(0x638, 0x1d4, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD10__IPU_DISPB_DAT_10 IOMUX_PAD(0x63c, 0x1d8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD10__GPIO2_10 IOMUX_PAD(0x63c, 0x1d8, 5, 0x86c, 0, NO_PAD_CTRL)
#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10 IOMUX_PAD(0x63c, 0x1d8, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD11__IPU_DISPB_DAT_11 IOMUX_PAD(0x640, 0x1dc, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD11__GPIO2_11 IOMUX_PAD(0x640, 0x1dc, 5, 0x870, 0, NO_PAD_CTRL)
#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11 IOMUX_PAD(0x640, 0x1dc, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4 IOMUX_PAD(0x640, 0x1dc, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD12__IPU_DISPB_DAT_12 IOMUX_PAD(0x644, 0x1e0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD12__GPIO2_12 IOMUX_PAD(0x644, 0x1e0, 5, 0x874, 0, NO_PAD_CTRL)
#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12 IOMUX_PAD(0x644, 0x1e0, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5 IOMUX_PAD(0x644, 0x1e0, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD13__IPU_DISPB_DAT_13 IOMUX_PAD(0x648, 0x1e4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD13__GPIO2_13 IOMUX_PAD(0x648, 0x1e4, 5, 0x878, 0, NO_PAD_CTRL)
#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13 IOMUX_PAD(0x648, 0x1e4, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6 IOMUX_PAD(0x648, 0x1e4, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD14__IPU_DISPB_DAT_14 IOMUX_PAD(0x64c, 0x1e8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD14__GPIO2_14 IOMUX_PAD(0x64c, 0x1e8, 5, 0x87c, 0, NO_PAD_CTRL)
#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0 IOMUX_PAD(0x64c, 0x1e8, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7 IOMUX_PAD(0x64c, 0x1e8, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD15__IPU_DISPB_DAT_15 IOMUX_PAD(0x650, 0x1ec, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD15__GPIO2_15 IOMUX_PAD(0x650, 0x1ec, 5, 0x880, 0, NO_PAD_CTRL)
#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1 IOMUX_PAD(0x650, 0x1ec, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8 IOMUX_PAD(0x650, 0x1ec, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD16__IPU_DISPB_DAT_16 IOMUX_PAD(0x654, 0x1f0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x654, 0x1f0, 2, 0x928, 0, NO_PAD_CTRL)
#define MX35_PAD_LD16__GPIO2_16 IOMUX_PAD(0x654, 0x1f0, 5, 0x884, 0, NO_PAD_CTRL)
#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2 IOMUX_PAD(0x654, 0x1f0, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9 IOMUX_PAD(0x654, 0x1f0, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD17__IPU_DISPB_DAT_17 IOMUX_PAD(0x658, 0x1f4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD17__IPU_DISPB_CS2 IOMUX_PAD(0x658, 0x1f4, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD17__GPIO2_17 IOMUX_PAD(0x658, 0x1f4, 5, 0x888, 0, NO_PAD_CTRL)
#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3 IOMUX_PAD(0x658, 0x1f4, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10 IOMUX_PAD(0x658, 0x1f4, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD18__IPU_DISPB_DAT_18 IOMUX_PAD(0x65c, 0x1f8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x65c, 0x1f8, 1, 0x924, 1, NO_PAD_CTRL)
#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x65c, 0x1f8, 2, 0x928, 1, NO_PAD_CTRL)
#define MX35_PAD_LD18__ESDHC3_CMD IOMUX_PAD(0x65c, 0x1f8, 3, 0x818, 0, NO_PAD_CTRL)
#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3 IOMUX_PAD(0x65c, 0x1f8, 4, 0x9b0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD18__GPIO3_24 IOMUX_PAD(0x65c, 0x1f8, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4 IOMUX_PAD(0x65c, 0x1f8, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11 IOMUX_PAD(0x65c, 0x1f8, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD19__IPU_DISPB_DAT_19 IOMUX_PAD(0x660, 0x1fc, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD19__IPU_DISPB_BCLK IOMUX_PAD(0x660, 0x1fc, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD19__IPU_DISPB_CS1 IOMUX_PAD(0x660, 0x1fc, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD19__ESDHC3_CLK IOMUX_PAD(0x660, 0x1fc, 3, 0x814, 0, NO_PAD_CTRL)
#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR IOMUX_PAD(0x660, 0x1fc, 4, 0x9c4, 0, NO_PAD_CTRL)
#define MX35_PAD_LD19__GPIO3_25 IOMUX_PAD(0x660, 0x1fc, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5 IOMUX_PAD(0x660, 0x1fc, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12 IOMUX_PAD(0x660, 0x1fc, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD20__IPU_DISPB_DAT_20 IOMUX_PAD(0x664, 0x200, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD20__IPU_DISPB_CS0 IOMUX_PAD(0x664, 0x200, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD20__IPU_DISPB_SD_CLK IOMUX_PAD(0x664, 0x200, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD20__ESDHC3_DAT0 IOMUX_PAD(0x664, 0x200, 3, 0x81c, 0, NO_PAD_CTRL)
#define MX35_PAD_LD20__GPIO3_26 IOMUX_PAD(0x664, 0x200, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3 IOMUX_PAD(0x664, 0x200, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13 IOMUX_PAD(0x664, 0x200, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD21__IPU_DISPB_DAT_21 IOMUX_PAD(0x668, 0x204, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD21__IPU_DISPB_PAR_RS IOMUX_PAD(0x668, 0x204, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD21__IPU_DISPB_SER_RS IOMUX_PAD(0x668, 0x204, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD21__ESDHC3_DAT1 IOMUX_PAD(0x668, 0x204, 3, 0x820, 0, NO_PAD_CTRL)
#define MX35_PAD_LD21__USB_TOP_USBOTG_STP IOMUX_PAD(0x668, 0x204, 4, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD21__GPIO3_27 IOMUX_PAD(0x668, 0x204, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL IOMUX_PAD(0x668, 0x204, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14 IOMUX_PAD(0x668, 0x204, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD22__IPU_DISPB_DAT_22 IOMUX_PAD(0x66c, 0x208, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD22__IPU_DISPB_WR IOMUX_PAD(0x66c, 0x208, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD22__IPU_DISPB_SD_D_I IOMUX_PAD(0x66c, 0x208, 2, 0x92c, 0, NO_PAD_CTRL)
#define MX35_PAD_LD22__ESDHC3_DAT2 IOMUX_PAD(0x66c, 0x208, 3, 0x824, 0, NO_PAD_CTRL)
#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT IOMUX_PAD(0x66c, 0x208, 4, 0x9c8, 0, NO_PAD_CTRL)
#define MX35_PAD_LD22__GPIO3_28 IOMUX_PAD(0x66c, 0x208, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR IOMUX_PAD(0x66c, 0x208, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD22__ARM11P_TOP_TRCTL IOMUX_PAD(0x66c, 0x208, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD23__IPU_DISPB_DAT_23 IOMUX_PAD(0x670, 0x20c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD23__IPU_DISPB_RD IOMUX_PAD(0x670, 0x20c, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO IOMUX_PAD(0x670, 0x20c, 2, 0x92c, 1, NO_PAD_CTRL)
#define MX35_PAD_LD23__ESDHC3_DAT3 IOMUX_PAD(0x670, 0x20c, 3, 0x828, 0, NO_PAD_CTRL)
#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7 IOMUX_PAD(0x670, 0x20c, 4, 0x9c0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD23__GPIO3_29 IOMUX_PAD(0x670, 0x20c, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS IOMUX_PAD(0x670, 0x20c, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_LD23__ARM11P_TOP_TRCLK IOMUX_PAD(0x670, 0x20c, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC IOMUX_PAD(0x674, 0x210, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO IOMUX_PAD(0x674, 0x210, 2, 0x92c, 2, NO_PAD_CTRL)
#define MX35_PAD_D3_HSYNC__GPIO3_30 IOMUX_PAD(0x674, 0x210, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE IOMUX_PAD(0x674, 0x210, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15 IOMUX_PAD(0x674, 0x210, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK IOMUX_PAD(0x678, 0x214, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK IOMUX_PAD(0x678, 0x214, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_FPSHIFT__GPIO3_31 IOMUX_PAD(0x678, 0x214, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0 IOMUX_PAD(0x678, 0x214, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16 IOMUX_PAD(0x678, 0x214, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY IOMUX_PAD(0x67c, 0x218, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O IOMUX_PAD(0x67c, 0x218, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_DRDY__GPIO1_0 IOMUX_PAD(0x67c, 0x218, 5, 0x82c, 2, NO_PAD_CTRL)
#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1 IOMUX_PAD(0x67c, 0x218, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17 IOMUX_PAD(0x67c, 0x218, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR IOMUX_PAD(0x680, 0x21c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CONTRAST__GPIO1_1 IOMUX_PAD(0x680, 0x21c, 5, 0x838, 2, NO_PAD_CTRL)
#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2 IOMUX_PAD(0x680, 0x21c, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18 IOMUX_PAD(0x680, 0x21c, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC IOMUX_PAD(0x684, 0x220, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1 IOMUX_PAD(0x684, 0x220, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_VSYNC__GPIO1_2 IOMUX_PAD(0x684, 0x220, 5, 0x848, 1, NO_PAD_CTRL)
#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD IOMUX_PAD(0x684, 0x220, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19 IOMUX_PAD(0x684, 0x220, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV IOMUX_PAD(0x688, 0x224, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS IOMUX_PAD(0x688, 0x224, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_REV__GPIO1_3 IOMUX_PAD(0x688, 0x224, 5, 0x84c, 1, NO_PAD_CTRL)
#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB IOMUX_PAD(0x688, 0x224, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20 IOMUX_PAD(0x688, 0x224, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS IOMUX_PAD(0x68c, 0x228, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_CLS__IPU_DISPB_CS2 IOMUX_PAD(0x68c, 0x228, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_CLS__GPIO1_4 IOMUX_PAD(0x68c, 0x228, 5, 0x850, 2, NO_PAD_CTRL)
#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0 IOMUX_PAD(0x68c, 0x228, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21 IOMUX_PAD(0x68c, 0x228, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL IOMUX_PAD(0x690, 0x22c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x690, 0x22c, 2, 0x928, 2, NO_PAD_CTRL)
#define MX35_PAD_D3_SPL__GPIO1_5 IOMUX_PAD(0x690, 0x22c, 5, 0x854, 2, NO_PAD_CTRL)
#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1 IOMUX_PAD(0x690, 0x22c, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22 IOMUX_PAD(0x690, 0x22c, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_CMD__ESDHC1_CMD IOMUX_PAD(0x694, 0x230, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_CMD__MSHC_SCLK IOMUX_PAD(0x694, 0x230, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x694, 0x230, 3, 0x924, 2, NO_PAD_CTRL)
#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4 IOMUX_PAD(0x694, 0x230, 4, 0x9b4, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_CMD__GPIO1_6 IOMUX_PAD(0x694, 0x230, 5, 0x858, 2, NO_PAD_CTRL)
#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL IOMUX_PAD(0x694, 0x230, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_CLK__ESDHC1_CLK IOMUX_PAD(0x698, 0x234, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_CLK__MSHC_BS IOMUX_PAD(0x698, 0x234, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK IOMUX_PAD(0x698, 0x234, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x698, 0x234, 4, 0x9b8, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_CLK__GPIO1_7 IOMUX_PAD(0x698, 0x234, 5, 0x85c, 2, NO_PAD_CTRL)
#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK IOMUX_PAD(0x698, 0x234, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0 IOMUX_PAD(0x69c, 0x238, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_DATA0__MSHC_DATA_0 IOMUX_PAD(0x69c, 0x238, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0 IOMUX_PAD(0x69c, 0x238, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6 IOMUX_PAD(0x69c, 0x238, 4, 0x9bc, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_DATA0__GPIO1_8 IOMUX_PAD(0x69c, 0x238, 5, 0x860, 2, NO_PAD_CTRL)
#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23 IOMUX_PAD(0x69c, 0x238, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1 IOMUX_PAD(0x6a0, 0x23c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_DATA1__MSHC_DATA_1 IOMUX_PAD(0x6a0, 0x23c, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS IOMUX_PAD(0x6a0, 0x23c, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0 IOMUX_PAD(0x6a0, 0x23c, 4, 0x9a4, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_DATA1__GPIO1_9 IOMUX_PAD(0x6a0, 0x23c, 5, 0x864, 1, NO_PAD_CTRL)
#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24 IOMUX_PAD(0x6a0, 0x23c, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2 IOMUX_PAD(0x6a4, 0x240, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_DATA2__MSHC_DATA_2 IOMUX_PAD(0x6a4, 0x240, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR IOMUX_PAD(0x6a4, 0x240, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1 IOMUX_PAD(0x6a4, 0x240, 4, 0x9a8, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_DATA2__GPIO1_10 IOMUX_PAD(0x6a4, 0x240, 5, 0x830, 1, NO_PAD_CTRL)
#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25 IOMUX_PAD(0x6a4, 0x240, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3 IOMUX_PAD(0x6a8, 0x244, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_DATA3__MSHC_DATA_3 IOMUX_PAD(0x6a8, 0x244, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD IOMUX_PAD(0x6a8, 0x244, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2 IOMUX_PAD(0x6a8, 0x244, 4, 0x9ac, 0, NO_PAD_CTRL)
#define MX35_PAD_SD1_DATA3__GPIO1_11 IOMUX_PAD(0x6a8, 0x244, 5, 0x834, 1, NO_PAD_CTRL)
#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26 IOMUX_PAD(0x6a8, 0x244, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD2_CMD__ESDHC2_CMD IOMUX_PAD(0x6ac, 0x248, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD2_CMD__I2C3_SCL IOMUX_PAD(0x6ac, 0x248, 1, 0x91c, 2, NO_PAD_CTRL)
#define MX35_PAD_SD2_CMD__ESDHC1_DAT4 IOMUX_PAD(0x6ac, 0x248, 2, 0x804, 0, NO_PAD_CTRL)
#define MX35_PAD_SD2_CMD__IPU_CSI_D_2 IOMUX_PAD(0x6ac, 0x248, 3, 0x938, 2, NO_PAD_CTRL)
#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4 IOMUX_PAD(0x6ac, 0x248, 4, 0x9dc, 0, NO_PAD_CTRL)
#define MX35_PAD_SD2_CMD__GPIO2_0 IOMUX_PAD(0x6ac, 0x248, 5, 0x868, 2, NO_PAD_CTRL)
#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x6ac, 0x248, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x6ac, 0x248, 7, 0x928, 3, NO_PAD_CTRL)
#define MX35_PAD_SD2_CLK__ESDHC2_CLK IOMUX_PAD(0x6b0, 0x24c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD2_CLK__I2C3_SDA IOMUX_PAD(0x6b0, 0x24c, 1, 0x920, 2, NO_PAD_CTRL)
#define MX35_PAD_SD2_CLK__ESDHC1_DAT5 IOMUX_PAD(0x6b0, 0x24c, 2, 0x808, 0, NO_PAD_CTRL)
#define MX35_PAD_SD2_CLK__IPU_CSI_D_3 IOMUX_PAD(0x6b0, 0x24c, 3, 0x93c, 2, NO_PAD_CTRL)
#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5 IOMUX_PAD(0x6b0, 0x24c, 4, 0x9e0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD2_CLK__GPIO2_1 IOMUX_PAD(0x6b0, 0x24c, 5, 0x894, 1, NO_PAD_CTRL)
#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1 IOMUX_PAD(0x6b0, 0x24c, 6, 0x998, 2, NO_PAD_CTRL)
#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2 IOMUX_PAD(0x6b0, 0x24c, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0 IOMUX_PAD(0x6b4, 0x250, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX IOMUX_PAD(0x6b4, 0x250, 1, 0x9a0, 1, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6 IOMUX_PAD(0x6b4, 0x250, 2, 0x80c, 0, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4 IOMUX_PAD(0x6b4, 0x250, 3, 0x940, 1, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6 IOMUX_PAD(0x6b4, 0x250, 4, 0x9e4, 0, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA0__GPIO2_2 IOMUX_PAD(0x6b4, 0x250, 5, 0x8c0, 1, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x6b4, 0x250, 6, 0x994, 3, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1 IOMUX_PAD(0x6b8, 0x254, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX IOMUX_PAD(0x6b8, 0x254, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7 IOMUX_PAD(0x6b8, 0x254, 2, 0x810, 0, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5 IOMUX_PAD(0x6b8, 0x254, 3, 0x944, 1, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0 IOMUX_PAD(0x6b8, 0x254, 4, 0x9cc, 0, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA1__GPIO2_3 IOMUX_PAD(0x6b8, 0x254, 5, 0x8cc, 1, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2 IOMUX_PAD(0x6bc, 0x258, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA2__UART3_RTS IOMUX_PAD(0x6bc, 0x258, 1, 0x99c, 0, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA2__CAN1_RXCAN IOMUX_PAD(0x6bc, 0x258, 2, 0x7c8, 1, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6 IOMUX_PAD(0x6bc, 0x258, 3, 0x948, 1, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1 IOMUX_PAD(0x6bc, 0x258, 4, 0x9d0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA2__GPIO2_4 IOMUX_PAD(0x6bc, 0x258, 5, 0x8d0, 1, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3 IOMUX_PAD(0x6c0, 0x25c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA3__UART3_CTS IOMUX_PAD(0x6c0, 0x25c, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA3__CAN1_TXCAN IOMUX_PAD(0x6c0, 0x25c, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7 IOMUX_PAD(0x6c0, 0x25c, 3, 0x94c, 1, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2 IOMUX_PAD(0x6c0, 0x25c, 4, 0x9d4, 0, NO_PAD_CTRL)
#define MX35_PAD_SD2_DATA3__GPIO2_5 IOMUX_PAD(0x6c0, 0x25c, 5, 0x8d4, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_CS0__ATA_CS0 IOMUX_PAD(0x6c4, 0x260, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_CS0__CSPI1_SS3 IOMUX_PAD(0x6c4, 0x260, 1, 0x7dc, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1 IOMUX_PAD(0x6c4, 0x260, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_CS0__GPIO2_6 IOMUX_PAD(0x6c4, 0x260, 5, 0x8d8, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_CS0__IPU_DIAGB_0 IOMUX_PAD(0x6c4, 0x260, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0 IOMUX_PAD(0x6c4, 0x260, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_CS1__ATA_CS1 IOMUX_PAD(0x6c8, 0x264, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2 IOMUX_PAD(0x6c8, 0x264, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_CS1__CSPI2_SS0 IOMUX_PAD(0x6c8, 0x264, 4, 0x7f0, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_CS1__GPIO2_7 IOMUX_PAD(0x6c8, 0x264, 5, 0x8dc, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_CS1__IPU_DIAGB_1 IOMUX_PAD(0x6c8, 0x264, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1 IOMUX_PAD(0x6c8, 0x264, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DIOR__ATA_DIOR IOMUX_PAD(0x6cc, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0 IOMUX_PAD(0x6cc, 0x268, 1, 0x81c, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR IOMUX_PAD(0x6cc, 0x268, 2, 0x9c4, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0 IOMUX_PAD(0x6cc, 0x268, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DIOR__CSPI2_SS1 IOMUX_PAD(0x6cc, 0x268, 4, 0x7f4, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DIOR__GPIO2_8 IOMUX_PAD(0x6cc, 0x268, 5, 0x8e0, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2 IOMUX_PAD(0x6cc, 0x268, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2 IOMUX_PAD(0x6cc, 0x268, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DIOW__ATA_DIOW IOMUX_PAD(0x6d0, 0x26c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1 IOMUX_PAD(0x6d0, 0x26c, 1, 0x820, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP IOMUX_PAD(0x6d0, 0x26c, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1 IOMUX_PAD(0x6d0, 0x26c, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DIOW__CSPI2_MOSI IOMUX_PAD(0x6d0, 0x26c, 4, 0x7ec, 2, NO_PAD_CTRL)
#define MX35_PAD_ATA_DIOW__GPIO2_9 IOMUX_PAD(0x6d0, 0x26c, 5, 0x8e4, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3 IOMUX_PAD(0x6d0, 0x26c, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3 IOMUX_PAD(0x6d0, 0x26c, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DMACK__ATA_DMACK IOMUX_PAD(0x6d4, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2 IOMUX_PAD(0x6d4, 0x270, 1, 0x824, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT IOMUX_PAD(0x6d4, 0x270, 2, 0x9c8, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DMACK__CSPI2_MISO IOMUX_PAD(0x6d4, 0x270, 4, 0x7e8, 2, NO_PAD_CTRL)
#define MX35_PAD_ATA_DMACK__GPIO2_10 IOMUX_PAD(0x6d4, 0x270, 5, 0x86c, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4 IOMUX_PAD(0x6d4, 0x270, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0 IOMUX_PAD(0x6d4, 0x270, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_RESET_B__ATA_RESET_B IOMUX_PAD(0x6d8, 0x274, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3 IOMUX_PAD(0x6d8, 0x274, 1, 0x828, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0 IOMUX_PAD(0x6d8, 0x274, 2, 0x9a4, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O IOMUX_PAD(0x6d8, 0x274, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_RESET_B__CSPI2_RDY IOMUX_PAD(0x6d8, 0x274, 4, 0x7e4, 2, NO_PAD_CTRL)
#define MX35_PAD_ATA_RESET_B__GPIO2_11 IOMUX_PAD(0x6d8, 0x274, 5, 0x870, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5 IOMUX_PAD(0x6d8, 0x274, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1 IOMUX_PAD(0x6d8, 0x274, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_IORDY__ATA_IORDY IOMUX_PAD(0x6dc, 0x278, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4 IOMUX_PAD(0x6dc, 0x278, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1 IOMUX_PAD(0x6dc, 0x278, 2, 0x9a8, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO IOMUX_PAD(0x6dc, 0x278, 3, 0x92c, 3, NO_PAD_CTRL)
#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4 IOMUX_PAD(0x6dc, 0x278, 4, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_IORDY__GPIO2_12 IOMUX_PAD(0x6dc, 0x278, 5, 0x874, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6 IOMUX_PAD(0x6dc, 0x278, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2 IOMUX_PAD(0x6dc, 0x278, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA0__ATA_DATA_0 IOMUX_PAD(0x6e0, 0x27c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5 IOMUX_PAD(0x6e0, 0x27c, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2 IOMUX_PAD(0x6e0, 0x27c, 2, 0x9ac, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x6e0, 0x27c, 3, 0x928, 4, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5 IOMUX_PAD(0x6e0, 0x27c, 4, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA0__GPIO2_13 IOMUX_PAD(0x6e0, 0x27c, 5, 0x878, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7 IOMUX_PAD(0x6e0, 0x27c, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3 IOMUX_PAD(0x6e0, 0x27c, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA1__ATA_DATA_1 IOMUX_PAD(0x6e4, 0x280, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6 IOMUX_PAD(0x6e4, 0x280, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3 IOMUX_PAD(0x6e4, 0x280, 2, 0x9b0, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK IOMUX_PAD(0x6e4, 0x280, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6 IOMUX_PAD(0x6e4, 0x280, 4, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA1__GPIO2_14 IOMUX_PAD(0x6e4, 0x280, 5, 0x87c, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8 IOMUX_PAD(0x6e4, 0x280, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27 IOMUX_PAD(0x6e4, 0x280, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA2__ATA_DATA_2 IOMUX_PAD(0x6e8, 0x284, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7 IOMUX_PAD(0x6e8, 0x284, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4 IOMUX_PAD(0x6e8, 0x284, 2, 0x9b4, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS IOMUX_PAD(0x6e8, 0x284, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7 IOMUX_PAD(0x6e8, 0x284, 4, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA2__GPIO2_15 IOMUX_PAD(0x6e8, 0x284, 5, 0x880, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9 IOMUX_PAD(0x6e8, 0x284, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28 IOMUX_PAD(0x6e8, 0x284, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA3__ATA_DATA_3 IOMUX_PAD(0x6ec, 0x288, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA3__ESDHC3_CLK IOMUX_PAD(0x6ec, 0x288, 1, 0x814, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x6ec, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA3__CSPI2_SCLK IOMUX_PAD(0x6ec, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA3__GPIO2_16 IOMUX_PAD(0x6ec, 0x288, 5, 0x884, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10 IOMUX_PAD(0x6ec, 0x288, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29 IOMUX_PAD(0x6ec, 0x288, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA4__ATA_DATA_4 IOMUX_PAD(0x6f0, 0x28c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA4__ESDHC3_CMD IOMUX_PAD(0x6f0, 0x28c, 1, 0x818, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6 IOMUX_PAD(0x6f0, 0x28c, 2, 0x9bc, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA4__GPIO2_17 IOMUX_PAD(0x6f0, 0x28c, 5, 0x888, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11 IOMUX_PAD(0x6f0, 0x28c, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30 IOMUX_PAD(0x6f0, 0x28c, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA5__ATA_DATA_5 IOMUX_PAD(0x6f4, 0x290, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7 IOMUX_PAD(0x6f4, 0x290, 2, 0x9c0, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA5__GPIO2_18 IOMUX_PAD(0x6f4, 0x290, 5, 0x88c, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12 IOMUX_PAD(0x6f4, 0x290, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31 IOMUX_PAD(0x6f4, 0x290, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA6__ATA_DATA_6 IOMUX_PAD(0x6f8, 0x294, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA6__CAN1_TXCAN IOMUX_PAD(0x6f8, 0x294, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA6__UART1_DTR IOMUX_PAD(0x6f8, 0x294, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD IOMUX_PAD(0x6f8, 0x294, 3, 0x7b4, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA6__GPIO2_19 IOMUX_PAD(0x6f8, 0x294, 5, 0x890, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13 IOMUX_PAD(0x6f8, 0x294, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA7__ATA_DATA_7 IOMUX_PAD(0x6fc, 0x298, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA7__CAN1_RXCAN IOMUX_PAD(0x6fc, 0x298, 1, 0x7c8, 2, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA7__UART1_DSR IOMUX_PAD(0x6fc, 0x298, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD IOMUX_PAD(0x6fc, 0x298, 3, 0x7b0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA7__GPIO2_20 IOMUX_PAD(0x6fc, 0x298, 5, 0x898, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14 IOMUX_PAD(0x6fc, 0x298, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA8__ATA_DATA_8 IOMUX_PAD(0x700, 0x29c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA8__UART3_RTS IOMUX_PAD(0x700, 0x29c, 1, 0x99c, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA8__UART1_RI IOMUX_PAD(0x700, 0x29c, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC IOMUX_PAD(0x700, 0x29c, 3, 0x7c0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA8__GPIO2_21 IOMUX_PAD(0x700, 0x29c, 5, 0x89c, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15 IOMUX_PAD(0x700, 0x29c, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA9__ATA_DATA_9 IOMUX_PAD(0x704, 0x2a0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA9__UART3_CTS IOMUX_PAD(0x704, 0x2a0, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA9__UART1_DCD IOMUX_PAD(0x704, 0x2a0, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS IOMUX_PAD(0x704, 0x2a0, 3, 0x7c4, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA9__GPIO2_22 IOMUX_PAD(0x704, 0x2a0, 5, 0x8a0, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16 IOMUX_PAD(0x704, 0x2a0, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA10__ATA_DATA_10 IOMUX_PAD(0x708, 0x2a4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX IOMUX_PAD(0x708, 0x2a4, 1, 0x9a0, 2, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC IOMUX_PAD(0x708, 0x2a4, 3, 0x7b8, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA10__GPIO2_23 IOMUX_PAD(0x708, 0x2a4, 5, 0x8a4, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17 IOMUX_PAD(0x708, 0x2a4, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA11__ATA_DATA_11 IOMUX_PAD(0x70c, 0x2a8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX IOMUX_PAD(0x70c, 0x2a8, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS IOMUX_PAD(0x70c, 0x2a8, 3, 0x7bc, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA11__GPIO2_24 IOMUX_PAD(0x70c, 0x2a8, 5, 0x8a8, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18 IOMUX_PAD(0x70c, 0x2a8, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA12__ATA_DATA_12 IOMUX_PAD(0x710, 0x2ac, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA12__I2C3_SCL IOMUX_PAD(0x710, 0x2ac, 1, 0x91c, 3, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA12__GPIO2_25 IOMUX_PAD(0x710, 0x2ac, 5, 0x8ac, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19 IOMUX_PAD(0x710, 0x2ac, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA13__ATA_DATA_13 IOMUX_PAD(0x714, 0x2b0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA13__I2C3_SDA IOMUX_PAD(0x714, 0x2b0, 1, 0x920, 3, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA13__GPIO2_26 IOMUX_PAD(0x714, 0x2b0, 5, 0x8b0, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20 IOMUX_PAD(0x714, 0x2b0, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA14__ATA_DATA_14 IOMUX_PAD(0x718, 0x2b4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0 IOMUX_PAD(0x718, 0x2b4, 1, 0x930, 2, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA14__KPP_ROW_0 IOMUX_PAD(0x718, 0x2b4, 3, 0x970, 2, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA14__GPIO2_27 IOMUX_PAD(0x718, 0x2b4, 5, 0x8b4, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21 IOMUX_PAD(0x718, 0x2b4, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA15__ATA_DATA_15 IOMUX_PAD(0x71c, 0x2b8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1 IOMUX_PAD(0x71c, 0x2b8, 1, 0x934, 2, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA15__KPP_ROW_1 IOMUX_PAD(0x71c, 0x2b8, 3, 0x974, 2, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA15__GPIO2_28 IOMUX_PAD(0x71c, 0x2b8, 5, 0x8b8, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22 IOMUX_PAD(0x71c, 0x2b8, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_INTRQ__ATA_INTRQ IOMUX_PAD(0x720, 0x2bc, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2 IOMUX_PAD(0x720, 0x2bc, 1, 0x938, 3, NO_PAD_CTRL)
#define MX35_PAD_ATA_INTRQ__KPP_ROW_2 IOMUX_PAD(0x720, 0x2bc, 3, 0x978, 2, NO_PAD_CTRL)
#define MX35_PAD_ATA_INTRQ__GPIO2_29 IOMUX_PAD(0x720, 0x2bc, 5, 0x8bc, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23 IOMUX_PAD(0x720, 0x2bc, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN IOMUX_PAD(0x724, 0x2c0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3 IOMUX_PAD(0x724, 0x2c0, 1, 0x93c, 3, NO_PAD_CTRL)
#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3 IOMUX_PAD(0x724, 0x2c0, 3, 0x97c, 2, NO_PAD_CTRL)
#define MX35_PAD_ATA_BUFF_EN__GPIO2_30 IOMUX_PAD(0x724, 0x2c0, 5, 0x8c4, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24 IOMUX_PAD(0x724, 0x2c0, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DMARQ__ATA_DMARQ IOMUX_PAD(0x728, 0x2c4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4 IOMUX_PAD(0x728, 0x2c4, 1, 0x940, 2, NO_PAD_CTRL)
#define MX35_PAD_ATA_DMARQ__KPP_COL_0 IOMUX_PAD(0x728, 0x2c4, 3, 0x950, 2, NO_PAD_CTRL)
#define MX35_PAD_ATA_DMARQ__GPIO2_31 IOMUX_PAD(0x728, 0x2c4, 5, 0x8c8, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25 IOMUX_PAD(0x728, 0x2c4, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4 IOMUX_PAD(0x728, 0x2c4, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DA0__ATA_DA_0 IOMUX_PAD(0x72c, 0x2c8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DA0__IPU_CSI_D_5 IOMUX_PAD(0x72c, 0x2c8, 1, 0x944, 2, NO_PAD_CTRL)
#define MX35_PAD_ATA_DA0__KPP_COL_1 IOMUX_PAD(0x72c, 0x2c8, 3, 0x954, 2, NO_PAD_CTRL)
#define MX35_PAD_ATA_DA0__GPIO3_0 IOMUX_PAD(0x72c, 0x2c8, 5, 0x8e8, 1, NO_PAD_CTRL)
#define MX35_PAD_ATA_DA0__IPU_DIAGB_26 IOMUX_PAD(0x72c, 0x2c8, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5 IOMUX_PAD(0x72c, 0x2c8, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DA1__ATA_DA_1 IOMUX_PAD(0x730, 0x2cc, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DA1__IPU_CSI_D_6 IOMUX_PAD(0x730, 0x2cc, 1, 0x948, 2, NO_PAD_CTRL)
#define MX35_PAD_ATA_DA1__KPP_COL_2 IOMUX_PAD(0x730, 0x2cc, 3, 0x958, 2, NO_PAD_CTRL)
#define MX35_PAD_ATA_DA1__GPIO3_1 IOMUX_PAD(0x730, 0x2cc, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DA1__IPU_DIAGB_27 IOMUX_PAD(0x730, 0x2cc, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6 IOMUX_PAD(0x730, 0x2cc, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DA2__ATA_DA_2 IOMUX_PAD(0x734, 0x2d0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DA2__IPU_CSI_D_7 IOMUX_PAD(0x734, 0x2d0, 1, 0x94c, 2, NO_PAD_CTRL)
#define MX35_PAD_ATA_DA2__KPP_COL_3 IOMUX_PAD(0x734, 0x2d0, 3, 0x95c, 2, NO_PAD_CTRL)
#define MX35_PAD_ATA_DA2__GPIO3_2 IOMUX_PAD(0x734, 0x2d0, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DA2__IPU_DIAGB_28 IOMUX_PAD(0x734, 0x2d0, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7 IOMUX_PAD(0x734, 0x2d0, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_MLB_CLK__MLB_MLBCLK IOMUX_PAD(0x738, 0x2d4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_MLB_CLK__GPIO3_3 IOMUX_PAD(0x738, 0x2d4, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_MLB_DAT__MLB_MLBDAT IOMUX_PAD(0x73c, 0x2d8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_MLB_DAT__GPIO3_4 IOMUX_PAD(0x73c, 0x2d8, 5, 0x904, 1, NO_PAD_CTRL)
#define MX35_PAD_MLB_SIG__MLB_MLBSIG IOMUX_PAD(0x740, 0x2dc, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_MLB_SIG__GPIO3_5 IOMUX_PAD(0x740, 0x2dc, 5, 0x908, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK IOMUX_PAD(0x744, 0x2e0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4 IOMUX_PAD(0x744, 0x2e0, 1, 0x804, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX IOMUX_PAD(0x744, 0x2e0, 2, 0x9a0, 3, NO_PAD_CTRL)
#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR IOMUX_PAD(0x744, 0x2e0, 3, 0x9ec, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI IOMUX_PAD(0x744, 0x2e0, 4, 0x7ec, 3, NO_PAD_CTRL)
#define MX35_PAD_FEC_TX_CLK__GPIO3_6 IOMUX_PAD(0x744, 0x2e0, 5, 0x90c, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x744, 0x2e0, 6, 0x928, 5, NO_PAD_CTRL)
#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0 IOMUX_PAD(0x744, 0x2e0, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK IOMUX_PAD(0x748, 0x2e4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5 IOMUX_PAD(0x748, 0x2e4, 1, 0x808, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX IOMUX_PAD(0x748, 0x2e4, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP IOMUX_PAD(0x748, 0x2e4, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO IOMUX_PAD(0x748, 0x2e4, 4, 0x7e8, 3, NO_PAD_CTRL)
#define MX35_PAD_FEC_RX_CLK__GPIO3_7 IOMUX_PAD(0x748, 0x2e4, 5, 0x910, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I IOMUX_PAD(0x748, 0x2e4, 6, 0x92c, 4, NO_PAD_CTRL)
#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1 IOMUX_PAD(0x748, 0x2e4, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x74c, 0x2e8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6 IOMUX_PAD(0x74c, 0x2e8, 1, 0x80c, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_RX_DV__UART3_RTS IOMUX_PAD(0x74c, 0x2e8, 2, 0x99c, 2, NO_PAD_CTRL)
#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT IOMUX_PAD(0x74c, 0x2e8, 3, 0x9f0, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK IOMUX_PAD(0x74c, 0x2e8, 4, 0x7e0, 3, NO_PAD_CTRL)
#define MX35_PAD_FEC_RX_DV__GPIO3_8 IOMUX_PAD(0x74c, 0x2e8, 5, 0x914, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK IOMUX_PAD(0x74c, 0x2e8, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2 IOMUX_PAD(0x74c, 0x2e8, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_COL__FEC_COL IOMUX_PAD(0x750, 0x2ec, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_COL__ESDHC1_DAT7 IOMUX_PAD(0x750, 0x2ec, 1, 0x810, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_COL__UART3_CTS IOMUX_PAD(0x750, 0x2ec, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0 IOMUX_PAD(0x750, 0x2ec, 3, 0x9cc, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_COL__CSPI2_RDY IOMUX_PAD(0x750, 0x2ec, 4, 0x7e4, 3, NO_PAD_CTRL)
#define MX35_PAD_FEC_COL__GPIO3_9 IOMUX_PAD(0x750, 0x2ec, 5, 0x918, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS IOMUX_PAD(0x750, 0x2ec, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3 IOMUX_PAD(0x750, 0x2ec, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0 IOMUX_PAD(0x754, 0x2f0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA0__PWM_PWMO IOMUX_PAD(0x754, 0x2f0, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA0__UART3_DTR IOMUX_PAD(0x754, 0x2f0, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1 IOMUX_PAD(0x754, 0x2f0, 3, 0x9d0, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA0__CSPI2_SS0 IOMUX_PAD(0x754, 0x2f0, 4, 0x7f0, 2, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA0__GPIO3_10 IOMUX_PAD(0x754, 0x2f0, 5, 0x8ec, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1 IOMUX_PAD(0x754, 0x2f0, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4 IOMUX_PAD(0x754, 0x2f0, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0 IOMUX_PAD(0x758, 0x2f4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x758, 0x2f4, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_TDATA0__UART3_DSR IOMUX_PAD(0x758, 0x2f4, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2 IOMUX_PAD(0x758, 0x2f4, 3, 0x9d4, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_TDATA0__CSPI2_SS1 IOMUX_PAD(0x758, 0x2f4, 4, 0x7f4, 2, NO_PAD_CTRL)
#define MX35_PAD_FEC_TDATA0__GPIO3_11 IOMUX_PAD(0x758, 0x2f4, 5, 0x8f0, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0 IOMUX_PAD(0x758, 0x2f4, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5 IOMUX_PAD(0x758, 0x2f4, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x75c, 0x2f8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1 IOMUX_PAD(0x75c, 0x2f8, 1, 0x998, 3, NO_PAD_CTRL)
#define MX35_PAD_FEC_TX_EN__UART3_RI IOMUX_PAD(0x75c, 0x2f8, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3 IOMUX_PAD(0x75c, 0x2f8, 3, 0x9d8, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_TX_EN__GPIO3_12 IOMUX_PAD(0x75c, 0x2f8, 5, 0x8f4, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS IOMUX_PAD(0x75c, 0x2f8, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6 IOMUX_PAD(0x75c, 0x2f8, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x760, 0x2fc, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_MDC__CAN2_TXCAN IOMUX_PAD(0x760, 0x2fc, 1, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_MDC__UART3_DCD IOMUX_PAD(0x760, 0x2fc, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4 IOMUX_PAD(0x760, 0x2fc, 3, 0x9dc, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_MDC__GPIO3_13 IOMUX_PAD(0x760, 0x2fc, 5, 0x8f8, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_MDC__IPU_DISPB_WR IOMUX_PAD(0x760, 0x2fc, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7 IOMUX_PAD(0x760, 0x2fc, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x764, 0x300, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_MDIO__CAN2_RXCAN IOMUX_PAD(0x764, 0x300, 1, 0x7cc, 2, NO_PAD_CTRL)
#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5 IOMUX_PAD(0x764, 0x300, 3, 0x9e0, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_MDIO__GPIO3_14 IOMUX_PAD(0x764, 0x300, 5, 0x8fc, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD IOMUX_PAD(0x764, 0x300, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8 IOMUX_PAD(0x764, 0x300, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR IOMUX_PAD(0x768, 0x304, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE IOMUX_PAD(0x768, 0x304, 1, 0x990, 2, NO_PAD_CTRL)
#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x768, 0x304, 2, 0x994, 4, NO_PAD_CTRL)
#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6 IOMUX_PAD(0x768, 0x304, 3, 0x9e4, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_TX_ERR__GPIO3_15 IOMUX_PAD(0x768, 0x304, 5, 0x900, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x768, 0x304, 6, 0x924, 3, NO_PAD_CTRL)
#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9 IOMUX_PAD(0x768, 0x304, 7, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR IOMUX_PAD(0x76c, 0x308, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0 IOMUX_PAD(0x76c, 0x308, 1, 0x930, 3, NO_PAD_CTRL)
#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7 IOMUX_PAD(0x76c, 0x308, 3, 0x9e8, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_RX_ERR__KPP_COL_4 IOMUX_PAD(0x76c, 0x308, 4, 0x960, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_RX_ERR__GPIO3_16 IOMUX_PAD(0x76c, 0x308, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO IOMUX_PAD(0x76c, 0x308, 6, 0x92c, 5, NO_PAD_CTRL)
#define MX35_PAD_FEC_CRS__FEC_CRS IOMUX_PAD(0x770, 0x30c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_CRS__IPU_CSI_D_1 IOMUX_PAD(0x770, 0x30c, 1, 0x934, 3, NO_PAD_CTRL)
#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR IOMUX_PAD(0x770, 0x30c, 3, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_CRS__KPP_COL_5 IOMUX_PAD(0x770, 0x30c, 4, 0x964, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_CRS__GPIO3_17 IOMUX_PAD(0x770, 0x30c, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE IOMUX_PAD(0x770, 0x30c, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1 IOMUX_PAD(0x774, 0x310, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2 IOMUX_PAD(0x774, 0x310, 1, 0x938, 4, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC IOMUX_PAD(0x774, 0x310, 2, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC IOMUX_PAD(0x774, 0x310, 3, 0x9f4, 2, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA1__KPP_COL_6 IOMUX_PAD(0x774, 0x310, 4, 0x968, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA1__GPIO3_18 IOMUX_PAD(0x774, 0x310, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0 IOMUX_PAD(0x774, 0x310, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1 IOMUX_PAD(0x778, 0x314, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3 IOMUX_PAD(0x778, 0x314, 1, 0x93c, 4, NO_PAD_CTRL)
#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS IOMUX_PAD(0x778, 0x314, 2, 0x7bc, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_TDATA1__KPP_COL_7 IOMUX_PAD(0x778, 0x314, 4, 0x96c, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_TDATA1__GPIO3_19 IOMUX_PAD(0x778, 0x314, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1 IOMUX_PAD(0x778, 0x314, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2 IOMUX_PAD(0x77c, 0x318, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4 IOMUX_PAD(0x77c, 0x318, 1, 0x940, 3, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD IOMUX_PAD(0x77c, 0x318, 2, 0x7b4, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA2__KPP_ROW_4 IOMUX_PAD(0x77c, 0x318, 4, 0x980, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA2__GPIO3_20 IOMUX_PAD(0x77c, 0x318, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2 IOMUX_PAD(0x780, 0x31c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5 IOMUX_PAD(0x780, 0x31c, 1, 0x944, 3, NO_PAD_CTRL)
#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD IOMUX_PAD(0x780, 0x31c, 2, 0x7b0, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_TDATA2__KPP_ROW_5 IOMUX_PAD(0x780, 0x31c, 4, 0x984, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_TDATA2__GPIO3_21 IOMUX_PAD(0x780, 0x31c, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3 IOMUX_PAD(0x784, 0x320, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6 IOMUX_PAD(0x784, 0x320, 1, 0x948, 3, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC IOMUX_PAD(0x784, 0x320, 2, 0x7c0, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA3__KPP_ROW_6 IOMUX_PAD(0x784, 0x320, 4, 0x988, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_RDATA3__GPIO3_22 IOMUX_PAD(0x784, 0x320, 6, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3 IOMUX_PAD(0x788, 0x324, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7 IOMUX_PAD(0x788, 0x324, 1, 0x94c, 3, NO_PAD_CTRL)
#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS IOMUX_PAD(0x788, 0x324, 2, 0x7c4, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_TDATA3__KPP_ROW_7 IOMUX_PAD(0x788, 0x324, 4, 0x98c, 1, NO_PAD_CTRL)
#define MX35_PAD_FEC_TDATA3__GPIO3_23 IOMUX_PAD(0x788, 0x324, 5, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK IOMUX_PAD(0x78c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX35_PAD_TEST_MODE__TCU_TEST_MODE IOMUX_PAD(0x790, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#endif /* __MACH_IOMUX_MX35_H__ */
arch/arm/mach-imx/iomux-v1.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* arch/arm/plat-mxc/iomux-v1.c
*
* Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH
* Copyright (C) 2009 Uwe Kleine-Koenig, Pengutronix
*
* Common code for i.MX1, i.MX21 and i.MX27
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/gpio.h>
#include <asm/mach/map.h>
#include "hardware.h"
#include "iomux-v1.h"
static void __iomem *imx_iomuxv1_baseaddr;
static unsigned imx_iomuxv1_numports;
static inline unsigned long imx_iomuxv1_readl(unsigned offset)
{
return imx_readl(imx_iomuxv1_baseaddr + offset);
}
static inline void imx_iomuxv1_writel(unsigned long val, unsigned offset)
{
imx_writel(val, imx_iomuxv1_baseaddr + offset);
}
static inline void imx_iomuxv1_rmwl(unsigned offset,
unsigned long mask, unsigned long value)
{
unsigned long reg = imx_iomuxv1_readl(offset);
reg &= ~mask;
reg |= value;
imx_iomuxv1_writel(reg, offset);
}
static inline void imx_iomuxv1_set_puen(
unsigned int port, unsigned int pin, int on)
{
unsigned long mask = 1 << pin;
imx_iomuxv1_rmwl(MXC_PUEN(port), mask, on ? mask : 0);
}
static inline void imx_iomuxv1_set_ddir(
unsigned int port, unsigned int pin, int out)
{
unsigned long mask = 1 << pin;
imx_iomuxv1_rmwl(MXC_DDIR(port), mask, out ? mask : 0);
}
static inline void imx_iomuxv1_set_gpr(
unsigned int port, unsigned int pin, int af)
{
unsigned long mask = 1 << pin;
imx_iomuxv1_rmwl(MXC_GPR(port), mask, af ? mask : 0);
}
static inline void imx_iomuxv1_set_gius(
unsigned int port, unsigned int pin, int inuse)
{
unsigned long mask = 1 << pin;
imx_iomuxv1_rmwl(MXC_GIUS(port), mask, inuse ? mask : 0);
}
static inline void imx_iomuxv1_set_ocr(
unsigned int port, unsigned int pin, unsigned int ocr)
{
unsigned long shift = (pin & 0xf) << 1;
unsigned long mask = 3 << shift;
unsigned long value = ocr << shift;
unsigned long offset = pin < 16 ? MXC_OCR1(port) : MXC_OCR2(port);
imx_iomuxv1_rmwl(offset, mask, value);
}
static inline void imx_iomuxv1_set_iconfa(
unsigned int port, unsigned int pin, unsigned int aout)
{
unsigned long shift = (pin & 0xf) << 1;
unsigned long mask = 3 << shift;
unsigned long value = aout << shift;
unsigned long offset = pin < 16 ? MXC_ICONFA1(port) : MXC_ICONFA2(port);
imx_iomuxv1_rmwl(offset, mask, value);
}
static inline void imx_iomuxv1_set_iconfb(
unsigned int port, unsigned int pin, unsigned int bout)
{
unsigned long shift = (pin & 0xf) << 1;
unsigned long mask = 3 << shift;
unsigned long value = bout << shift;
unsigned long offset = pin < 16 ? MXC_ICONFB1(port) : MXC_ICONFB2(port);
imx_iomuxv1_rmwl(offset, mask, value);
}
int mxc_gpio_mode(int gpio_mode)
{
unsigned int pin = gpio_mode & GPIO_PIN_MASK;
unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
unsigned int aout = (gpio_mode >> GPIO_AOUT_SHIFT) & 3;
unsigned int bout = (gpio_mode >> GPIO_BOUT_SHIFT) & 3;
if (port >= imx_iomuxv1_numports)
return -EINVAL;
/* Pullup enable */
imx_iomuxv1_set_puen(port, pin, gpio_mode & GPIO_PUEN);
/* Data direction */
imx_iomuxv1_set_ddir(port, pin, gpio_mode & GPIO_OUT);
/* Primary / alternate function */
imx_iomuxv1_set_gpr(port, pin, gpio_mode & GPIO_AF);
/* use as gpio? */
imx_iomuxv1_set_gius(port, pin, !(gpio_mode & (GPIO_PF | GPIO_AF)));
imx_iomuxv1_set_ocr(port, pin, ocr);
imx_iomuxv1_set_iconfa(port, pin, aout);
imx_iomuxv1_set_iconfb(port, pin, bout);
return 0;
}
static int imx_iomuxv1_setup_multiple(const int *list, unsigned count)
{
size_t i;
int ret = 0;
for (i = 0; i < count; ++i) {
ret = mxc_gpio_mode(list[i]);
if (ret)
return ret;
}
return ret;
}
int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
const char *label)
{
int ret;
ret = imx_iomuxv1_setup_multiple(pin_list, count);
return ret;
}
int __init imx_iomuxv1_init(void __iomem *base, int numports)
{
imx_iomuxv1_baseaddr = base;
imx_iomuxv1_numports = numports;
return 0;
}
arch/arm/mach-imx/iomux-v1.h deleted 100644 → 0
View file @ a4f07008
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
*/
#ifndef __MACH_IOMUX_V1_H__
#define __MACH_IOMUX_V1_H__
/*
* GPIO Module and I/O Multiplexer
* x = 0..3 for reg_A, reg_B, reg_C, reg_D
*/
#define MXC_DDIR(x) (0x00 + ((x) << 8))
#define MXC_OCR1(x) (0x04 + ((x) << 8))
#define MXC_OCR2(x) (0x08 + ((x) << 8))
#define MXC_ICONFA1(x) (0x0c + ((x) << 8))
#define MXC_ICONFA2(x) (0x10 + ((x) << 8))
#define MXC_ICONFB1(x) (0x14 + ((x) << 8))
#define MXC_ICONFB2(x) (0x18 + ((x) << 8))
#define MXC_DR(x) (0x1c + ((x) << 8))
#define MXC_GIUS(x) (0x20 + ((x) << 8))
#define MXC_SSR(x) (0x24 + ((x) << 8))
#define MXC_ICR1(x) (0x28 + ((x) << 8))
#define MXC_ICR2(x) (0x2c + ((x) << 8))
#define MXC_IMR(x) (0x30 + ((x) << 8))
#define MXC_ISR(x) (0x34 + ((x) << 8))
#define MXC_GPR(x) (0x38 + ((x) << 8))
#define MXC_SWR(x) (0x3c + ((x) << 8))
#define MXC_PUEN(x) (0x40 + ((x) << 8))
#define MX1_NUM_GPIO_PORT 4
#define MX21_NUM_GPIO_PORT 6
#define MX27_NUM_GPIO_PORT 6
#define GPIO_PIN_MASK 0x1f
#define GPIO_PORT_SHIFT 5
#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
#define GPIO_OUT (1 << 8)
#define GPIO_IN (0 << 8)
#define GPIO_PUEN (1 << 9)
#define GPIO_PF (1 << 10)
#define GPIO_AF (1 << 11)
#define GPIO_OCR_SHIFT 12
#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT)
#define GPIO_AIN (0 << GPIO_OCR_SHIFT)
#define GPIO_BIN (1 << GPIO_OCR_SHIFT)
#define GPIO_CIN (2 << GPIO_OCR_SHIFT)
#define GPIO_GPIO (3 << GPIO_OCR_SHIFT)
#define GPIO_AOUT_SHIFT 14
#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT)
#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT)
#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT)
#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT)
#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT)
#define GPIO_BOUT_SHIFT 16
#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT)
#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT)
#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT)
#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT)
#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT)
extern int mxc_gpio_mode(int gpio_mode);
extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
const char *label);
extern int imx_iomuxv1_init(void __iomem *base, int numports);
#endif /* __MACH_IOMUX_V1_H__ */
arch/arm/mach-imx/iomux-v3.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
* Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
* <armlinux@phytec.de>
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/gpio.h>
#include <asm/mach/map.h>
#include "hardware.h"
#include "iomux-v3.h"
static void __iomem *base;
/*
* configures a single pad in the iomuxer
*/
int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
{
u32 mux_ctrl_ofs = (pad & MUX_CTRL_OFS_MASK) >> MUX_CTRL_OFS_SHIFT;
u32 mux_mode = (pad & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
u32 sel_input_ofs = (pad & MUX_SEL_INPUT_OFS_MASK) >> MUX_SEL_INPUT_OFS_SHIFT;
u32 sel_input = (pad & MUX_SEL_INPUT_MASK) >> MUX_SEL_INPUT_SHIFT;
u32 pad_ctrl_ofs = (pad & MUX_PAD_CTRL_OFS_MASK) >> MUX_PAD_CTRL_OFS_SHIFT;
u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT;
if (mux_ctrl_ofs)
imx_writel(mux_mode, base + mux_ctrl_ofs);
if (sel_input_ofs)
imx_writel(sel_input, base + sel_input_ofs);
if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
imx_writel(pad_ctrl, base + pad_ctrl_ofs);
return 0;
}
int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list,
unsigned count)
{
const iomux_v3_cfg_t *p = pad_list;
int i;
int ret;
for (i = 0; i < count; i++) {
ret = mxc_iomux_v3_setup_pad(*p);
if (ret)
return ret;
p++;
}
return 0;
}
void mxc_iomux_v3_init(void __iomem *iomux_v3_base)
{
base = iomux_v3_base;
}
arch/arm/mach-imx/iomux-v3.h deleted 100644 → 0
View file @ a4f07008
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
* <armlinux@phytec.de>
*/
#ifndef __MACH_IOMUX_V3_H__
#define __MACH_IOMUX_V3_H__
/*
* build IOMUX_PAD structure
*
* This iomux scheme is based around pads, which are the physical balls
* on the processor.
*
* - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
* things like driving strength and pullup/pulldown.
* - Each pad can have but not necessarily does have an output routing register
* (IOMUXC_SW_MUX_CTL_PAD_x).
* - Each pad can have but not necessarily does have an input routing register
* (IOMUXC_x_SELECT_INPUT)
*
* The three register sets do not have a fixed offset to each other,
* hence we order this table by pad control registers (which all pads
* have) and put the optional i/o routing registers into additional
* fields.
*
* The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
* If <padname> or <padmode> refers to a GPIO, it is named
* GPIO_<unit>_<num>
*
* IOMUX/PAD Bit field definitions
*
* MUX_CTRL_OFS: 0..11 (12)
* PAD_CTRL_OFS: 12..23 (12)
* SEL_INPUT_OFS: 24..35 (12)
* MUX_MODE + SION: 36..40 (5)
* PAD_CTRL + NO_PAD_CTRL: 41..57 (17)
* SEL_INP: 58..61 (4)
* reserved: 63 (1)
*/
typedef u64 iomux_v3_cfg_t;
#define MUX_CTRL_OFS_SHIFT 0
#define MUX_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_CTRL_OFS_SHIFT)
#define MUX_PAD_CTRL_OFS_SHIFT 12
#define MUX_PAD_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_PAD_CTRL_OFS_SHIFT)
#define MUX_SEL_INPUT_OFS_SHIFT 24
#define MUX_SEL_INPUT_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_SEL_INPUT_OFS_SHIFT)
#define MUX_MODE_SHIFT 36
#define MUX_MODE_MASK ((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT)
#define MUX_PAD_CTRL_SHIFT 41
#define MUX_PAD_CTRL_MASK ((iomux_v3_cfg_t)0x1ffff << MUX_PAD_CTRL_SHIFT)
#define MUX_SEL_INPUT_SHIFT 58
#define MUX_SEL_INPUT_MASK ((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT)
#define MUX_PAD_CTRL(x) ((iomux_v3_cfg_t)(x) << MUX_PAD_CTRL_SHIFT)
#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _sel_input_ofs, \
_sel_input, _pad_ctrl) \
(((iomux_v3_cfg_t)(_mux_ctrl_ofs) << MUX_CTRL_OFS_SHIFT) | \
((iomux_v3_cfg_t)(_mux_mode) << MUX_MODE_SHIFT) | \
((iomux_v3_cfg_t)(_pad_ctrl_ofs) << MUX_PAD_CTRL_OFS_SHIFT) | \
((iomux_v3_cfg_t)(_pad_ctrl) << MUX_PAD_CTRL_SHIFT) | \
((iomux_v3_cfg_t)(_sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT) | \
((iomux_v3_cfg_t)(_sel_input) << MUX_SEL_INPUT_SHIFT))
#define NEW_PAD_CTRL(cfg, pad) (((cfg) & ~MUX_PAD_CTRL_MASK) | MUX_PAD_CTRL(pad))
/*
* Use to set PAD control
*/
#define NO_PAD_CTRL (1 << 16)
#define PAD_CTL_DVS (1 << 13)
#define PAD_CTL_HYS (1 << 8)
#define PAD_CTL_PKE (1 << 7)
#define PAD_CTL_PUE (1 << 6 | PAD_CTL_PKE)
#define PAD_CTL_PUS_100K_DOWN (0 << 4 | PAD_CTL_PUE)
#define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE)
#define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE)
#define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE)
#define PAD_CTL_ODE (1 << 3)
#define PAD_CTL_DSE_LOW (0 << 1)
#define PAD_CTL_DSE_MED (1 << 1)
#define PAD_CTL_DSE_HIGH (2 << 1)
#define PAD_CTL_DSE_MAX (3 << 1)
#define PAD_CTL_SRE_FAST (1 << 0)
#define PAD_CTL_SRE_SLOW (0 << 0)
#define IOMUX_CONFIG_SION (0x1 << 4)
#define MX51_NUM_GPIO_PORT 4
#define GPIO_PIN_MASK 0x1f
#define GPIO_PORT_SHIFT 5
#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
/*
* setups a single pad in the iomuxer
*/
int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
/*
* setups multiple pads
* convenient way to call the above function with tables
*/
int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list,
unsigned count);
/*
* Initialise the iomux controller
*/
void mxc_iomux_v3_init(void __iomem *iomux_v3_base);
#endif /* __MACH_IOMUX_V3_H__*/
arch/arm/mach-imx/mach-armadillo5x0.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* armadillo5x0.c
*
* Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
* updates in http://alberdroid.blogspot.com/
*
* Based on Atmark Techno, Inc. armadillo 500 BSP 2008
* Based on mx31ads.c and pcm037.c Great Work!
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/smsc911x.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
#include <linux/io.h>
#include <linux/input.h>
#include <linux/i2c.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/delay.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
#include "common.h"
#include "devices-imx31.h"
#include "crmregs-imx3.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
static int armadillo5x0_pins[] = {
/* UART1 */
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
/* UART2 */
MX31_PIN_CTS2__CTS2,
MX31_PIN_RTS2__RTS2,
MX31_PIN_TXD2__TXD2,
MX31_PIN_RXD2__RXD2,
/* LAN9118_IRQ */
IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO),
/* SDHC1 */
MX31_PIN_SD1_DATA3__SD1_DATA3,
MX31_PIN_SD1_DATA2__SD1_DATA2,
MX31_PIN_SD1_DATA1__SD1_DATA1,
MX31_PIN_SD1_DATA0__SD1_DATA0,
MX31_PIN_SD1_CLK__SD1_CLK,
MX31_PIN_SD1_CMD__SD1_CMD,
/* Framebuffer */
MX31_PIN_LD0__LD0,
MX31_PIN_LD1__LD1,
MX31_PIN_LD2__LD2,
MX31_PIN_LD3__LD3,
MX31_PIN_LD4__LD4,
MX31_PIN_LD5__LD5,
MX31_PIN_LD6__LD6,
MX31_PIN_LD7__LD7,
MX31_PIN_LD8__LD8,
MX31_PIN_LD9__LD9,
MX31_PIN_LD10__LD10,
MX31_PIN_LD11__LD11,
MX31_PIN_LD12__LD12,
MX31_PIN_LD13__LD13,
MX31_PIN_LD14__LD14,
MX31_PIN_LD15__LD15,
MX31_PIN_LD16__LD16,
MX31_PIN_LD17__LD17,
MX31_PIN_VSYNC3__VSYNC3,
MX31_PIN_HSYNC__HSYNC,
MX31_PIN_FPSHIFT__FPSHIFT,
MX31_PIN_DRDY0__DRDY0,
IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
/* I2C2 */
MX31_PIN_CSPI2_MOSI__SCL,
MX31_PIN_CSPI2_MISO__SDA,
/* OTG */
MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
MX31_PIN_USBOTG_CLK__USBOTG_CLK,
MX31_PIN_USBOTG_DIR__USBOTG_DIR,
MX31_PIN_USBOTG_NXT__USBOTG_NXT,
MX31_PIN_USBOTG_STP__USBOTG_STP,
/* USB host 2 */
IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
};
/* USB */
#define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4)
#define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6)
#define USBH2_CS IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
static int usbotg_init(struct platform_device *pdev)
{
int err;
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
/* Chip already enabled by hardware */
/* OTG phy reset*/
err = gpio_request(OTG_RESET, "USB-OTG-RESET");
if (err) {
pr_err("Failed to request the usb otg reset gpio\n");
return err;
}
err = gpio_direction_output(OTG_RESET, 1/*HIGH*/);
if (err) {
pr_err("Failed to reset the usb otg phy\n");
goto otg_free_reset;
}
gpio_set_value(OTG_RESET, 0/*LOW*/);
mdelay(5);
gpio_set_value(OTG_RESET, 1/*HIGH*/);
mdelay(10);
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
MXC_EHCI_INTERFACE_DIFF_UNI);
otg_free_reset:
gpio_free(OTG_RESET);
return err;
}
static int usbh2_init(struct platform_device *pdev)
{
int err;
mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
mxc_iomux_set_gpr(MUX_PGP_UH2, true);
/* Enable the chip */
err = gpio_request(USBH2_CS, "USB-H2-CS");
if (err) {
pr_err("Failed to request the usb host 2 CS gpio\n");
return err;
}
err = gpio_direction_output(USBH2_CS, 0/*Enabled*/);
if (err) {
pr_err("Failed to drive the usb host 2 CS gpio\n");
goto h2_free_cs;
}
/* H2 phy reset*/
err = gpio_request(USBH2_RESET, "USB-H2-RESET");
if (err) {
pr_err("Failed to request the usb host 2 reset gpio\n");
goto h2_free_cs;
}
err = gpio_direction_output(USBH2_RESET, 1/*HIGH*/);
if (err) {
pr_err("Failed to reset the usb host 2 phy\n");
goto h2_free_reset;
}
gpio_set_value(USBH2_RESET, 0/*LOW*/);
mdelay(5);
gpio_set_value(USBH2_RESET, 1/*HIGH*/);
mdelay(10);
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
MXC_EHCI_INTERFACE_DIFF_UNI);
h2_free_reset:
gpio_free(USBH2_RESET);
h2_free_cs:
gpio_free(USBH2_CS);
return err;
}
static struct mxc_usbh_platform_data usbotg_pdata __initdata = {
.init = usbotg_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
};
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
};
/* RTC over I2C*/
#define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4)
static struct i2c_board_info armadillo5x0_i2c_rtc = {
I2C_BOARD_INFO("s35390a", 0x30),
};
/* GPIO BUTTONS */
static struct gpio_keys_button armadillo5x0_buttons[] = {
{
.code = KEY_ENTER, /*28*/
.gpio = IOMUX_TO_GPIO(MX31_PIN_SCLK0),
.active_low = 1,
.desc = "menu",
.wakeup = 1,
}, {
.code = KEY_BACK, /*158*/
.gpio = IOMUX_TO_GPIO(MX31_PIN_SRST0),
.active_low = 1,
.desc = "back",
.wakeup = 1,
}
};
static const struct gpio_keys_platform_data
armadillo5x0_button_data __initconst = {
.buttons = armadillo5x0_buttons,
.nbuttons = ARRAY_SIZE(armadillo5x0_buttons),
};
/*
* NAND Flash
*/
static const struct mxc_nand_platform_data
armadillo5x0_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
};
/*
* MTD NOR Flash
*/
static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
{
.name = "nor.bootloader",
.offset = 0x00000000,
.size = 4*32*1024,
}, {
.name = "nor.kernel",
.offset = MTDPART_OFS_APPEND,
.size = 16*128*1024,
}, {
.name = "nor.userland",
.offset = MTDPART_OFS_APPEND,
.size = 110*128*1024,
}, {
.name = "nor.config",
.offset = MTDPART_OFS_APPEND,
.size = 1*128*1024,
},
};
static const struct physmap_flash_data
armadillo5x0_nor_flash_pdata __initconst = {
.width = 2,
.parts = armadillo5x0_nor_flash_partitions,
.nr_parts = ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
};
static const struct resource armadillo5x0_nor_flash_resource __initconst = {
.flags = IORESOURCE_MEM,
.start = MX31_CS0_BASE_ADDR,
.end = MX31_CS0_BASE_ADDR + SZ_64M - 1,
};
/*
* FB support
*/
static const struct fb_videomode fb_modedb[] = {
{ /* 640x480 @ 60 Hz */
.name = "CRT-VGA",
.refresh = 60,
.xres = 640,
.yres = 480,
.pixclock = 39721,
.left_margin = 35,
.right_margin = 115,
.upper_margin = 43,
.lower_margin = 1,
.hsync_len = 10,
.vsync_len = 1,
.sync = FB_SYNC_OE_ACT_HIGH,
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
}, {/* 800x600 @ 56 Hz */
.name = "CRT-SVGA",
.refresh = 56,
.xres = 800,
.yres = 600,
.pixclock = 30000,
.left_margin = 30,
.right_margin = 108,
.upper_margin = 13,
.lower_margin = 10,
.hsync_len = 10,
.vsync_len = 1,
.sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_HOR_HIGH_ACT |
FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
},
};
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "CRT-VGA",
.mode = fb_modedb,
.num_modes = ARRAY_SIZE(fb_modedb),
};
/*
* SDHC 1
* MMC support
*/
static int armadillo5x0_sdhc1_get_ro(struct device *dev)
{
return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
}
static int armadillo5x0_sdhc1_init(struct device *dev,
irq_handler_t detect_irq, void *data)
{
int ret;
int gpio_det, gpio_wp;
gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK);
gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B);
ret = gpio_request(gpio_det, "sdhc-card-detect");
if (ret)
return ret;
gpio_direction_input(gpio_det);
ret = gpio_request(gpio_wp, "sdhc-write-protect");
if (ret)
goto err_gpio_free;
gpio_direction_input(gpio_wp);
/* When supported the trigger type have to be BOTH */
ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)),
detect_irq, IRQF_TRIGGER_FALLING,
"sdhc-detect", data);
if (ret)
goto err_gpio_free_2;
return 0;
err_gpio_free_2:
gpio_free(gpio_wp);
err_gpio_free:
gpio_free(gpio_det);
return ret;
}
static void armadillo5x0_sdhc1_exit(struct device *dev, void *data)
{
free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)), data);
gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK));
gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
}
static const struct imxmmc_platform_data sdhc_pdata __initconst = {
.get_ro = armadillo5x0_sdhc1_get_ro,
.init = armadillo5x0_sdhc1_init,
.exit = armadillo5x0_sdhc1_exit,
};
/*
* SMSC 9118
* Network support
*/
static struct resource armadillo5x0_smc911x_resources[] = {
{
.start = MX31_CS3_BASE_ADDR,
.end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
.flags = IORESOURCE_MEM,
}, {
/* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
static struct smsc911x_platform_config smsc911x_info = {
.flags = SMSC911X_USE_16BIT,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
};
static struct platform_device armadillo5x0_smc911x_device = {
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(armadillo5x0_smc911x_resources),
.resource = armadillo5x0_smc911x_resources,
.dev = {
.platform_data = &smsc911x_info,
},
};
/* UART device data */
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static struct platform_device *devices[] __initdata = {
&armadillo5x0_smc911x_device,
};
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
REGULATOR_SUPPLY("vddvario", "smsc911x"),
};
/*
* Perform board specific initializations
*/
static void __init armadillo5x0_init(void)
{
imx31_soc_init();
mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
imx31_add_imx_i2c1(NULL);
/* Register UART */
imx31_add_imx_uart0(&uart_pdata);
imx31_add_imx_uart1(&uart_pdata);
/* Register FB */
imx31_add_ipu_core();
imx31_add_mx3_sdc_fb(&mx3fb_pdata);
/* Register NOR Flash */
platform_device_register_resndata(NULL, "physmap-flash", -1,
&armadillo5x0_nor_flash_resource, 1,
&armadillo5x0_nor_flash_pdata,
sizeof(armadillo5x0_nor_flash_pdata));
/* Register NAND Flash */
imx31_add_mxc_nand(&armadillo5x0_nand_board_info);
/* set NAND page size to 2k if not configured via boot mode pins */
imx_writel(imx_readl(mx3_ccm_base + MXC_CCM_RCSR) | (1 << 30),
mx3_ccm_base + MXC_CCM_RCSR);
}
static void __init armadillo5x0_late(void)
{
armadillo5x0_smc911x_resources[1].start =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
armadillo5x0_smc911x_resources[1].end =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
platform_add_devices(devices, ARRAY_SIZE(devices));
imx_add_gpio_keys(&armadillo5x0_button_data);
/* SMSC9118 IRQ pin */
gpio_direction_input(MX31_PIN_GPIO1_0);
/* Register SDHC */
imx31_add_mxc_mmc(0, &sdhc_pdata);
/* RTC */
/* Get RTC IRQ and register the chip */
if (!gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc")) {
if (!gpio_direction_input(ARMADILLO5X0_RTC_GPIO))
armadillo5x0_i2c_rtc.irq =
gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
else
gpio_free(ARMADILLO5X0_RTC_GPIO);
}
if (armadillo5x0_i2c_rtc.irq == 0)
pr_warn("armadillo5x0_init: failed to get RTC IRQ\n");
i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
/* USB */
usbotg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (usbotg_pdata.otg)
imx31_add_mxc_ehci_otg(&usbotg_pdata);
usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (usbh2_pdata.otg)
imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
}
static void __init armadillo5x0_timer_init(void)
{
mx31_clocks_init(26000000);
}
MACHINE_START(ARMADILLO5X0, "Armadillo-500")
/* Maintainer: Alberto Panizzo */
.atag_offset = 0x100,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.init_time = armadillo5x0_timer_init,
.init_machine = armadillo5x0_init,
.init_late = armadillo5x0_late,
.restart = mxc_restart,
MACHINE_END
arch/arm/mach-imx/mach-bug.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright (C) 2002 Shane Nay (shane@minirl.com)
* Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2011 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/mach/time.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include "common.h"
#include "devices-imx31.h"
#include "hardware.h"
#include "iomux-mx3.h"
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static const unsigned int bug_pins[] __initconst = {
MX31_PIN_PC_RST__CTS5,
MX31_PIN_PC_VS2__RTS5,
MX31_PIN_PC_BVD2__TXD5,
MX31_PIN_PC_BVD1__RXD5,
};
static void __init bug_board_init(void)
{
imx31_soc_init();
mxc_iomux_setup_multiple_pins(bug_pins,
ARRAY_SIZE(bug_pins), "uart-4");
imx31_add_imx_uart4(&uart_pdata);
}
static void __init bug_timer_init(void)
{
mx31_clocks_init(26000000);
}
MACHINE_START(BUG, "BugLabs BUGBase")
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.init_time = bug_timer_init,
.init_machine = bug_board_init,
.restart = mxc_restart,
MACHINE_END
arch/arm/mach-imx/mm-imx27.c → arch/arm/mach-imx/mach-imx27.c
View file @ accdab6d
// SPDX-License-Identifier: GPL-2.0-or-later // SPDX-License-Identifier: GPL-2.0-or-later
/* /*
* arch/arm/mach-imx/mm-imx27.c * Copyright 2012 Sascha Hauer, Pengutronix
*
* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
*/ */
#include <linux/mm.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/pinctrl/machine.h> #include <linux/irq.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/mm.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h> #include <asm/mach/map.h>
#include <asm/mach/time.h>
#include "common.h" #include "common.h"
#include "devices/devices-common.h"
#include "hardware.h" #include "hardware.h"
#include "iomux-v1.h" #include "mx27.h"
/* MX27 memory map definition */ /* MX27 memory map definition */
static struct map_desc imx27_io_desc[] __initdata = { static struct map_desc imx27_io_desc[] __initdata = {
...@@ -44,45 +46,36 @@ static struct map_desc imx27_io_desc[] __initdata = { ...@@ -44,45 +46,36 @@ static struct map_desc imx27_io_desc[] __initdata = {
* system startup to create static physical to virtual * system startup to create static physical to virtual
* memory map for the IO modules. * memory map for the IO modules.
*/ */
void __init mx27_map_io(void) static void __init mx27_map_io(void)
{ {
iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc)); iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc));
} }
void __init imx27_init_early(void) static void __init imx27_init_early(void)
{ {
mxc_set_cpu_type(MXC_CPU_MX27); mxc_set_cpu_type(MXC_CPU_MX27);
imx_iomuxv1_init(MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR),
MX27_NUM_GPIO_PORT);
} }
void __init mx27_init_irq(void) static void __init mx27_init_irq(void)
{ {
mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR)); void __iomem *avic_base;
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "fsl,avic");
avic_base = of_iomap(np, 0);
BUG_ON(!avic_base);
mxc_init_irq(avic_base);
} }
static const struct resource imx27_audmux_res[] __initconst = { static const char * const imx27_dt_board_compat[] __initconst = {
DEFINE_RES_MEM(MX27_AUDMUX_BASE_ADDR, SZ_4K), "fsl,imx27",
NULL
}; };
void __init imx27_soc_init(void) DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
{ .map_io = mx27_map_io,
mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR)); .init_early = imx27_init_early,
mxc_device_init(); .init_irq = mx27_init_irq,
.init_late = imx27_pm_init,
/* i.mx27 has the i.mx21 type gpio */ .dt_compat = imx27_dt_board_compat,
mxc_register_gpio("imx21-gpio", 0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); MACHINE_END
mxc_register_gpio("imx21-gpio", 1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 2, MX27_GPIO3_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
pinctrl_provide_dummies();
imx_add_imx_dma("imx27-dma", MX27_DMA_BASE_ADDR, MX27_INT_DMACH0);
/* imx27 has the imx21 type audmux */
platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res,
ARRAY_SIZE(imx27_audmux_res));
imx27_pm_init();
}
arch/arm/mach-imx/mach-imx27_visstrim_m10.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* mach-imx27_visstrim_m10.c
*
* Copyright 2010 Javier Martin <javier.martin@vista-silicon.com>
*
* Based on mach-pcm038.c, mach-pca100.c, mach-mx27ads.c and others.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
#include <linux/platform_data/pca953x.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/leds.h>
#include <linux/platform_data/asoc-mx27vis.h>
#include <sound/tlv320aic32x4.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/system_info.h>
#include <asm/memblock.h>
#include "common.h"
#include "devices-imx27.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx27.h"
#define TVP5150_RSTN (GPIO_PORTC + 18)
#define TVP5150_PWDN (GPIO_PORTC + 19)
#define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
#define SDHC1_IRQ_GPIO IMX_GPIO_NR(2, 25)
#define VERSION_MASK 0x7
#define MOTHERBOARD_SHIFT 4
#define EXPBOARD_SHIFT 0
#define MOTHERBOARD_BIT2 (GPIO_PORTD + 31)
#define MOTHERBOARD_BIT1 (GPIO_PORTD + 30)
#define MOTHERBOARD_BIT0 (GPIO_PORTD + 29)
#define EXPBOARD_BIT2 (GPIO_PORTD + 25)
#define EXPBOARD_BIT1 (GPIO_PORTD + 27)
#define EXPBOARD_BIT0 (GPIO_PORTD + 28)
#define AMP_GAIN_0 (GPIO_PORTF + 9)
#define AMP_GAIN_1 (GPIO_PORTF + 8)
#define AMP_MUTE_SDL (GPIO_PORTE + 5)
#define AMP_MUTE_SDR (GPIO_PORTF + 7)
static const int visstrim_m10_pins[] __initconst = {
/* UART1 (console) */
PE12_PF_UART1_TXD,
PE13_PF_UART1_RXD,
PE14_PF_UART1_CTS,
PE15_PF_UART1_RTS,
/* FEC */
PD0_AIN_FEC_TXD0,
PD1_AIN_FEC_TXD1,
PD2_AIN_FEC_TXD2,
PD3_AIN_FEC_TXD3,
PD4_AOUT_FEC_RX_ER,
PD5_AOUT_FEC_RXD1,
PD6_AOUT_FEC_RXD2,
PD7_AOUT_FEC_RXD3,
PD8_AF_FEC_MDIO,
PD9_AIN_FEC_MDC,
PD10_AOUT_FEC_CRS,
PD11_AOUT_FEC_TX_CLK,
PD12_AOUT_FEC_RXD0,
PD13_AOUT_FEC_RX_DV,
PD14_AOUT_FEC_RX_CLK,
PD15_AOUT_FEC_COL,
PD16_AIN_FEC_TX_ER,
PF23_AIN_FEC_TX_EN,
/* SSI1 */
PC20_PF_SSI1_FS,
PC21_PF_SSI1_RXD,
PC22_PF_SSI1_TXD,
PC23_PF_SSI1_CLK,
/* SDHC1 */
PE18_PF_SD1_D0,
PE19_PF_SD1_D1,
PE20_PF_SD1_D2,
PE21_PF_SD1_D3,
PE22_PF_SD1_CMD,
PE23_PF_SD1_CLK,
/* Both I2Cs */
PD17_PF_I2C_DATA,
PD18_PF_I2C_CLK,
PC5_PF_I2C2_SDA,
PC6_PF_I2C2_SCL,
/* USB OTG */
OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
PC9_PF_USBOTG_DATA0,
PC11_PF_USBOTG_DATA1,
PC10_PF_USBOTG_DATA2,
PC13_PF_USBOTG_DATA3,
PC12_PF_USBOTG_DATA4,
PC7_PF_USBOTG_DATA5,
PC8_PF_USBOTG_DATA6,
PE25_PF_USBOTG_DATA7,
PE24_PF_USBOTG_CLK,
PE2_PF_USBOTG_DIR,
PE0_PF_USBOTG_NXT,
PE1_PF_USBOTG_STP,
PB23_PF_USB_PWR,
PB24_PF_USB_OC,
/* CSI */
TVP5150_RSTN | GPIO_GPIO | GPIO_OUT,
TVP5150_PWDN | GPIO_GPIO | GPIO_OUT,
PB10_PF_CSI_D0,
PB11_PF_CSI_D1,
PB12_PF_CSI_D2,
PB13_PF_CSI_D3,
PB14_PF_CSI_D4,
PB15_PF_CSI_MCLK,
PB16_PF_CSI_PIXCLK,
PB17_PF_CSI_D5,
PB18_PF_CSI_D6,
PB19_PF_CSI_D7,
PB20_PF_CSI_VSYNC,
PB21_PF_CSI_HSYNC,
/* mother board version */
MOTHERBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
MOTHERBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
MOTHERBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
/* expansion board version */
EXPBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
EXPBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
EXPBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
/* Audio AMP control */
AMP_GAIN_0 | GPIO_GPIO | GPIO_OUT,
AMP_GAIN_1 | GPIO_GPIO | GPIO_OUT,
AMP_MUTE_SDL | GPIO_GPIO | GPIO_OUT,
AMP_MUTE_SDR | GPIO_GPIO | GPIO_OUT,
};
static struct gpio visstrim_m10_version_gpios[] = {
{ EXPBOARD_BIT0, GPIOF_IN, "exp-version-0" },
{ EXPBOARD_BIT1, GPIOF_IN, "exp-version-1" },
{ EXPBOARD_BIT2, GPIOF_IN, "exp-version-2" },
{ MOTHERBOARD_BIT0, GPIOF_IN, "mother-version-0" },
{ MOTHERBOARD_BIT1, GPIOF_IN, "mother-version-1" },
{ MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" },
};
static const struct gpio visstrim_m10_gpios[] __initconst = {
{
.gpio = TVP5150_RSTN,
.flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH,
.label = "tvp5150_rstn",
},
{
.gpio = TVP5150_PWDN,
.flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
.label = "tvp5150_pwdn",
},
{
.gpio = OTG_PHY_CS_GPIO,
.flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
.label = "usbotg_cs",
},
{
.gpio = AMP_GAIN_0,
.flags = GPIOF_DIR_OUT,
.label = "amp-gain-0",
},
{
.gpio = AMP_GAIN_1,
.flags = GPIOF_DIR_OUT,
.label = "amp-gain-1",
},
{
.gpio = AMP_MUTE_SDL,
.flags = GPIOF_DIR_OUT,
.label = "amp-mute-sdl",
},
{
.gpio = AMP_MUTE_SDR,
.flags = GPIOF_DIR_OUT,
.label = "amp-mute-sdr",
},
};
/* Camera */
static struct mx2_camera_platform_data visstrim_camera = {
.flags = MX2_CAMERA_CCIR | MX2_CAMERA_CCIR_INTERLACE |
MX2_CAMERA_PCLK_SAMPLE_RISING,
.clk = 100000,
};
static phys_addr_t mx2_camera_base __initdata;
#define MX2_CAMERA_BUF_SIZE SZ_8M
static void __init visstrim_analog_camera_init(void)
{
struct platform_device *pdev;
gpio_set_value(TVP5150_PWDN, 1);
ndelay(1);
gpio_set_value(TVP5150_RSTN, 0);
ndelay(500);
gpio_set_value(TVP5150_RSTN, 1);
ndelay(200000);
pdev = imx27_add_mx2_camera(&visstrim_camera);
if (IS_ERR(pdev))
return;
dma_declare_coherent_memory(&pdev->dev, mx2_camera_base,
mx2_camera_base, MX2_CAMERA_BUF_SIZE);
}
static void __init visstrim_reserve(void)
{
/* reserve 4 MiB for mx2-camera */
mx2_camera_base = arm_memblock_steal(3 * MX2_CAMERA_BUF_SIZE,
MX2_CAMERA_BUF_SIZE);
}
/* GPIOs used as events for applications */
static struct gpio_keys_button visstrim_gpio_keys[] = {
{
.type = EV_KEY,
.code = KEY_RESTART,
.gpio = (GPIO_PORTC + 15),
.desc = "Default config",
.active_low = 0,
.wakeup = 1,
},
{
.type = EV_KEY,
.code = KEY_RECORD,
.gpio = (GPIO_PORTF + 14),
.desc = "Record",
.active_low = 0,
.wakeup = 1,
},
{
.type = EV_KEY,
.code = KEY_STOP,
.gpio = (GPIO_PORTF + 13),
.desc = "Stop",
.active_low = 0,
.wakeup = 1,
}
};
static const struct gpio_keys_platform_data
visstrim_gpio_keys_platform_data __initconst = {
.buttons = visstrim_gpio_keys,
.nbuttons = ARRAY_SIZE(visstrim_gpio_keys),
};
/* led */
static const struct gpio_led visstrim_m10_leds[] __initconst = {
{
.name = "visstrim:ld0",
.default_trigger = "nand-disk",
.gpio = (GPIO_PORTC + 29),
},
{
.name = "visstrim:ld1",
.default_trigger = "nand-disk",
.gpio = (GPIO_PORTC + 24),
},
{
.name = "visstrim:ld2",
.default_trigger = "nand-disk",
.gpio = (GPIO_PORTC + 28),
},
{
.name = "visstrim:ld3",
.default_trigger = "nand-disk",
.gpio = (GPIO_PORTC + 25),
},
};
static const struct gpio_led_platform_data visstrim_m10_led_data __initconst = {
.leds = visstrim_m10_leds,
.num_leds = ARRAY_SIZE(visstrim_m10_leds),
};
/* Visstrim_SM10 has a microSD slot connected to sdhc1 */
static int visstrim_m10_sdhc1_init(struct device *dev,
irq_handler_t detect_irq, void *data)
{
int ret;
ret = request_irq(gpio_to_irq(SDHC1_IRQ_GPIO), detect_irq,
IRQF_TRIGGER_FALLING, "mmc-detect", data);
return ret;
}
static void visstrim_m10_sdhc1_exit(struct device *dev, void *data)
{
free_irq(gpio_to_irq(SDHC1_IRQ_GPIO), data);
}
static const struct imxmmc_platform_data visstrim_m10_sdhc_pdata __initconst = {
.init = visstrim_m10_sdhc1_init,
.exit = visstrim_m10_sdhc1_exit,
};
/* Visstrim_SM10 NOR flash */
static struct physmap_flash_data visstrim_m10_flash_data = {
.width = 2,
};
static struct resource visstrim_m10_flash_resource = {
.start = 0xc0000000,
.end = 0xc0000000 + SZ_64M - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device visstrim_m10_nor_mtd_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &visstrim_m10_flash_data,
},
.num_resources = 1,
.resource = &visstrim_m10_flash_resource,
};
static struct platform_device *platform_devices[] __initdata = {
&visstrim_m10_nor_mtd_device,
};
/* Visstrim_M10 uses UART0 as console */
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
/* I2C */
static const struct imxi2c_platform_data visstrim_m10_i2c_data __initconst = {
.bitrate = 100000,
};
static struct pca953x_platform_data visstrim_m10_pca9555_pdata = {
.gpio_base = 240, /* After MX27 internal GPIOs */
.invert = 0,
};
static struct aic32x4_pdata visstrim_m10_aic32x4_pdata = {
.power_cfg = AIC32X4_PWR_MICBIAS_2075_LDOIN |
AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE |
AIC32X4_PWR_AIC32X4_LDO_ENABLE |
AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36 |
AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED,
.micpga_routing = AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K |
AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K,
.swapdacs = false,
};
static struct i2c_board_info visstrim_m10_i2c_devices[] = {
{
I2C_BOARD_INFO("pca9555", 0x20),
.platform_data = &visstrim_m10_pca9555_pdata,
},
{
I2C_BOARD_INFO("tlv320aic32x4", 0x18),
.platform_data = &visstrim_m10_aic32x4_pdata,
},
{
I2C_BOARD_INFO("m41t00", 0x68),
}
};
/* USB OTG */
static int otg_phy_init(struct platform_device *pdev)
{
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
static const struct mxc_usbh_platform_data
visstrim_m10_usbotg_pdata __initconst = {
.init = otg_phy_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
};
/* SSI */
static const struct imx_ssi_platform_data visstrim_m10_ssi_pdata __initconst = {
.flags = IMX_SSI_DMA | IMX_SSI_SYN,
};
/* coda */
static void __init visstrim_coda_init(void)
{
struct platform_device *pdev;
pdev = imx27_add_coda();
dma_declare_coherent_memory(&pdev->dev,
mx2_camera_base + MX2_CAMERA_BUF_SIZE,
mx2_camera_base + MX2_CAMERA_BUF_SIZE,
MX2_CAMERA_BUF_SIZE);
}
/* DMA deinterlace */
static struct platform_device visstrim_deinterlace = {
.name = "m2m-deinterlace",
.id = 0,
};
static void __init visstrim_deinterlace_init(void)
{
int ret = -ENOMEM;
struct platform_device *pdev = &visstrim_deinterlace;
ret = platform_device_register(pdev);
dma_declare_coherent_memory(&pdev->dev,
mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE,
mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE,
MX2_CAMERA_BUF_SIZE);
}
/* Emma-PrP for format conversion */
static void __init visstrim_emmaprp_init(void)
{
struct platform_device *pdev;
int ret;
pdev = imx27_add_mx2_emmaprp();
if (IS_ERR(pdev))
return;
/*
* Use the same memory area as the analog camera since both
* devices are, by nature, exclusive.
*/
ret = dma_declare_coherent_memory(&pdev->dev,
mx2_camera_base, mx2_camera_base,
MX2_CAMERA_BUF_SIZE);
if (ret)
pr_err("Failed to declare memory for emmaprp\n");
}
/* Audio */
static const struct snd_mx27vis_platform_data snd_mx27vis_pdata __initconst = {
.amp_gain0_gpio = AMP_GAIN_0,
.amp_gain1_gpio = AMP_GAIN_1,
.amp_mutel_gpio = AMP_MUTE_SDL,
.amp_muter_gpio = AMP_MUTE_SDR,
};
static void __init visstrim_m10_revision(void)
{
int exp_version = 0;
int mo_version = 0;
int ret;
ret = gpio_request_array(visstrim_m10_version_gpios,
ARRAY_SIZE(visstrim_m10_version_gpios));
if (ret) {
pr_err("Failed to request version gpios");
return;
}
/* Get expansion board version (negative logic) */
exp_version |= !gpio_get_value(EXPBOARD_BIT2) << 2;
exp_version |= !gpio_get_value(EXPBOARD_BIT1) << 1;
exp_version |= !gpio_get_value(EXPBOARD_BIT0);
/* Get mother board version (negative logic) */
mo_version |= !gpio_get_value(MOTHERBOARD_BIT2) << 2;
mo_version |= !gpio_get_value(MOTHERBOARD_BIT1) << 1;
mo_version |= !gpio_get_value(MOTHERBOARD_BIT0);
system_rev = 0x27000;
system_rev |= (mo_version << MOTHERBOARD_SHIFT);
system_rev |= (exp_version << EXPBOARD_SHIFT);
}
static void __init visstrim_m10_board_init(void)
{
int ret;
imx27_soc_init();
visstrim_m10_revision();
ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins,
ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10");
if (ret)
pr_err("Failed to setup pins (%d)\n", ret);
imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
imx27_add_imx_uart0(&uart_pdata);
imx27_add_imx_i2c(0, &visstrim_m10_i2c_data);
imx27_add_imx_i2c(1, &visstrim_m10_i2c_data);
i2c_register_board_info(0, visstrim_m10_i2c_devices,
ARRAY_SIZE(visstrim_m10_i2c_devices));
imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata);
imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata);
imx27_add_fec(NULL);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
static void __init visstrim_m10_late_init(void)
{
int mo_version, ret;
ret = gpio_request_array(visstrim_m10_gpios,
ARRAY_SIZE(visstrim_m10_gpios));
if (ret)
pr_err("Failed to request gpios (%d)\n", ret);
imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
imx_add_platform_device("mx27vis", 0, NULL, 0, &snd_mx27vis_pdata,
sizeof(snd_mx27vis_pdata));
gpio_led_register_device(0, &visstrim_m10_led_data);
/* Use mother board version to decide what video devices we shall use */
mo_version = (system_rev >> MOTHERBOARD_SHIFT) & VERSION_MASK;
if (mo_version & 0x1) {
visstrim_emmaprp_init();
/*
* Despite not being used, tvp5150 must be
* powered on to avoid I2C problems. To minimize
* power consupmtion keep reset enabled.
*/
gpio_set_value(TVP5150_PWDN, 1);
ndelay(1);
gpio_set_value(TVP5150_RSTN, 0);
} else {
visstrim_deinterlace_init();
visstrim_analog_camera_init();
}
visstrim_coda_init();
}
static void __init visstrim_m10_timer_init(void)
{
mx27_clocks_init((unsigned long)25000000);
}
MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
.atag_offset = 0x100,
.reserve = visstrim_reserve,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
.init_time = visstrim_m10_timer_init,
.init_machine = visstrim_m10_board_init,
.init_late = visstrim_m10_late_init,
.restart = mxc_restart,
MACHINE_END
arch/arm/mach-imx/mach-imx7ulp.c
View file @ accdab6d
...@@ -67,6 +67,9 @@ static const char *const imx7ulp_dt_compat[] __initconst = { ...@@ -67,6 +67,9 @@ static const char *const imx7ulp_dt_compat[] __initconst = {
static void __init imx7ulp_init_late(void) static void __init imx7ulp_init_late(void)
{ {
if (IS_ENABLED(CONFIG_ARM_IMX_CPUFREQ_DT))
platform_device_register_simple("imx-cpufreq-dt", -1, NULL, 0);
imx7ulp_cpuidle_init(); imx7ulp_cpuidle_init();
} }
......
arch/arm/mach-imx/mach-kzm_arm11_01.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* KZM-ARM11-01 support
* Copyright (C) 2009 Yoichi Yuasa <yuasa@linux-mips.org>
*
* based on code for MX31ADS,
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright (C) 2002 Shane Nay (shane@minirl.com)
* Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
*/
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/smsc911x.h>
#include <linux/types.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/memory.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include "common.h"
#include "devices-imx31.h"
#include "hardware.h"
#include "iomux-mx3.h"
#define KZM_ARM11_IO_ADDRESS(x) (IOMEM( \
IMX_IO_P2V_MODULE(x, MX31_CS4) ?: \
IMX_IO_P2V_MODULE(x, MX31_CS5)) ?: \
MX31_IO_ADDRESS(x))
/*
* KZM-ARM11-01 Board Control Registers on FPGA
*/
#define KZM_ARM11_CTL1 (MX31_CS4_BASE_ADDR + 0x1000)
#define KZM_ARM11_CTL2 (MX31_CS4_BASE_ADDR + 0x1001)
#define KZM_ARM11_RSW1 (MX31_CS4_BASE_ADDR + 0x1002)
#define KZM_ARM11_BACK_LIGHT (MX31_CS4_BASE_ADDR + 0x1004)
#define KZM_ARM11_FPGA_REV (MX31_CS4_BASE_ADDR + 0x1008)
#define KZM_ARM11_7SEG_LED (MX31_CS4_BASE_ADDR + 0x1010)
#define KZM_ARM11_LEDS (MX31_CS4_BASE_ADDR + 0x1020)
#define KZM_ARM11_DIPSW2 (MX31_CS4_BASE_ADDR + 0x1003)
/*
* External UART for touch panel on FPGA
*/
#define KZM_ARM11_16550 (MX31_CS4_BASE_ADDR + 0x1050)
#if IS_ENABLED(CONFIG_SERIAL_8250)
/*
* KZM-ARM11-01 has an external UART on FPGA
*/
static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550),
.mapbase = KZM_ARM11_16550,
/* irq number is run-time assigned */
.irqflags = IRQ_TYPE_EDGE_RISING,
.uartclk = 14745600,
.regshift = 0,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
UPF_BUGGY_UART,
},
{},
};
static struct resource serial8250_resources[] = {
{
.start = KZM_ARM11_16550,
.end = KZM_ARM11_16550 + 0x10,
.flags = IORESOURCE_MEM,
},
{
/* irq number is run-time assigned */
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device serial_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = serial_platform_data,
},
.num_resources = ARRAY_SIZE(serial8250_resources),
.resource = serial8250_resources,
};
static int __init kzm_init_ext_uart(void)
{
u8 tmp;
/*
* GPIO 1-1: external UART interrupt line
*/
mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO));
gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "ext-uart-int");
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
/*
* Unmask UART interrupt
*/
tmp = __raw_readb(KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
tmp |= 0x2;
__raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
serial_platform_data[0].irq =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
serial8250_resources[1].start =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
serial8250_resources[1].end =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
return platform_device_register(&serial_device);
}
#else
static inline int kzm_init_ext_uart(void)
{
return 0;
}
#endif
/*
* SMSC LAN9118
*/
#if IS_ENABLED(CONFIG_SMSC911X)
static struct smsc911x_platform_config kzm_smsc9118_config = {
.phy_interface = PHY_INTERFACE_MODE_MII,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
};
static struct resource kzm_smsc9118_resources[] = {
{
.start = MX31_CS5_BASE_ADDR,
.end = MX31_CS5_BASE_ADDR + SZ_128K - 1,
.flags = IORESOURCE_MEM,
},
{
/* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
static struct platform_device kzm_smsc9118_device = {
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(kzm_smsc9118_resources),
.resource = kzm_smsc9118_resources,
.dev = {
.platform_data = &kzm_smsc9118_config,
},
};
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
REGULATOR_SUPPLY("vddvario", "smsc911x"),
};
static int __init kzm_init_smsc9118(void)
{
/*
* GPIO 1-2: SMSC9118 interrupt line
*/
mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO));
gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int");
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
kzm_smsc9118_resources[1].start =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
kzm_smsc9118_resources[1].end =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
return platform_device_register(&kzm_smsc9118_device);
}
#else
static inline int kzm_init_smsc9118(void)
{
return 0;
}
#endif
#if IS_ENABLED(CONFIG_SERIAL_IMX)
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static void __init kzm_init_imx_uart(void)
{
imx31_add_imx_uart0(&uart_pdata);
imx31_add_imx_uart1(&uart_pdata);
}
#else
static inline void kzm_init_imx_uart(void)
{
}
#endif
static int kzm_pins[] __initdata = {
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
MX31_PIN_DCD_DCE1__DCD_DCE1,
MX31_PIN_RI_DCE1__RI_DCE1,
MX31_PIN_DSR_DCE1__DSR_DCE1,
MX31_PIN_DTR_DCE1__DTR_DCE1,
MX31_PIN_CTS2__CTS2,
MX31_PIN_RTS2__RTS2,
MX31_PIN_TXD2__TXD2,
MX31_PIN_RXD2__RXD2,
MX31_PIN_DCD_DTE1__DCD_DTE2,
MX31_PIN_RI_DTE1__RI_DTE2,
MX31_PIN_DSR_DTE1__DSR_DTE2,
MX31_PIN_DTR_DTE1__DTR_DTE2,
};
/*
* Board specific initialization.
*/
static void __init kzm_board_init(void)
{
imx31_soc_init();
mxc_iomux_setup_multiple_pins(kzm_pins,
ARRAY_SIZE(kzm_pins), "kzm");
kzm_init_imx_uart();
pr_info("Clock input source is 26MHz\n");
}
static void __init kzm_late_init(void)
{
kzm_init_ext_uart();
kzm_init_smsc9118();
}
/*
* This structure defines static mappings for the kzm-arm11-01 board.
*/
static struct map_desc kzm_io_desc[] __initdata = {
{
.virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
.length = MX31_CS4_SIZE,
.type = MT_DEVICE
},
{
.virtual = (unsigned long)MX31_CS5_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
.length = MX31_CS5_SIZE,
.type = MT_DEVICE
},
};
/*
* Set up static virtual mappings.
*/
static void __init kzm_map_io(void)
{
mx31_map_io();
iotable_init(kzm_io_desc, ARRAY_SIZE(kzm_io_desc));
}
static void __init kzm_timer_init(void)
{
mx31_clocks_init(26000000);
}
MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
.atag_offset = 0x100,
.map_io = kzm_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.init_time = kzm_timer_init,
.init_machine = kzm_board_init,
.init_late = kzm_late_init,
.restart = mxc_restart,
MACHINE_END
arch/arm/mach-imx/mach-mx21ads.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright (C) 2002 Shane Nay (shane@minirl.com)
* Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
*/
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/physmap.h>
#include <linux/gpio/driver.h>
#include <linux/gpio/machine.h>
#include <linux/gpio.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "common.h"
#include "devices-imx21.h"
#include "hardware.h"
#include "iomux-mx21.h"
#define MX21ADS_CS8900A_REG (MX21_CS1_BASE_ADDR + 0x000000)
#define MX21ADS_ST16C255_IOBASE_REG (MX21_CS1_BASE_ADDR + 0x200000)
#define MX21ADS_VERSION_REG (MX21_CS1_BASE_ADDR + 0x400000)
#define MX21ADS_IO_REG (MX21_CS1_BASE_ADDR + 0x800000)
#define MX21ADS_MMC_CD IMX_GPIO_NR(4, 25)
#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11)
#define MX21ADS_MMGPIO_BASE (6 * 32)
/* MX21ADS_IO_REG bit definitions */
#define MX21ADS_IO_SD_WP (MX21ADS_MMGPIO_BASE + 0)
#define MX21ADS_IO_TP6 (MX21ADS_IO_SD_WP)
#define MX21ADS_IO_SW_SEL (MX21ADS_MMGPIO_BASE + 1)
#define MX21ADS_IO_TP7 (MX21ADS_IO_SW_SEL)
#define MX21ADS_IO_RESET_E_UART (MX21ADS_MMGPIO_BASE + 2)
#define MX21ADS_IO_RESET_BASE (MX21ADS_MMGPIO_BASE + 3)
#define MX21ADS_IO_CSI_CTL2 (MX21ADS_MMGPIO_BASE + 4)
#define MX21ADS_IO_CSI_CTL1 (MX21ADS_MMGPIO_BASE + 5)
#define MX21ADS_IO_CSI_CTL0 (MX21ADS_MMGPIO_BASE + 6)
#define MX21ADS_IO_UART1_EN (MX21ADS_MMGPIO_BASE + 7)
#define MX21ADS_IO_UART4_EN (MX21ADS_MMGPIO_BASE + 8)
#define MX21ADS_IO_LCDON (MX21ADS_MMGPIO_BASE + 9)
#define MX21ADS_IO_IRDA_EN (MX21ADS_MMGPIO_BASE + 10)
#define MX21ADS_IO_IRDA_FIR_SEL (MX21ADS_MMGPIO_BASE + 11)
#define MX21ADS_IO_IRDA_MD0_B (MX21ADS_MMGPIO_BASE + 12)
#define MX21ADS_IO_IRDA_MD1 (MX21ADS_MMGPIO_BASE + 13)
#define MX21ADS_IO_LED4_ON (MX21ADS_MMGPIO_BASE + 14)
#define MX21ADS_IO_LED3_ON (MX21ADS_MMGPIO_BASE + 15)
static const int mx21ads_pins[] __initconst = {
/* CS8900A */
(GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11),
/* UART1 */
PE12_PF_UART1_TXD,
PE13_PF_UART1_RXD,
PE14_PF_UART1_CTS,
PE15_PF_UART1_RTS,
/* UART3 (IrDA) - only TXD and RXD */
PE8_PF_UART3_TXD,
PE9_PF_UART3_RXD,
/* UART4 */
PB26_AF_UART4_RTS,
PB28_AF_UART4_TXD,
PB29_AF_UART4_CTS,
PB31_AF_UART4_RXD,
/* LCDC */
PA5_PF_LSCLK,
PA6_PF_LD0,
PA7_PF_LD1,
PA8_PF_LD2,
PA9_PF_LD3,
PA10_PF_LD4,
PA11_PF_LD5,
PA12_PF_LD6,
PA13_PF_LD7,
PA14_PF_LD8,
PA15_PF_LD9,
PA16_PF_LD10,
PA17_PF_LD11,
PA18_PF_LD12,
PA19_PF_LD13,
PA20_PF_LD14,
PA21_PF_LD15,
PA22_PF_LD16,
PA24_PF_REV, /* Sharp panel dedicated signal */
PA25_PF_CLS, /* Sharp panel dedicated signal */
PA26_PF_PS, /* Sharp panel dedicated signal */
PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */
PA28_PF_HSYNC,
PA29_PF_VSYNC,
PA30_PF_CONTRAST,
PA31_PF_OE_ACD,
/* MMC/SDHC */
PE18_PF_SD1_D0,
PE19_PF_SD1_D1,
PE20_PF_SD1_D2,
PE21_PF_SD1_D3,
PE22_PF_SD1_CMD,
PE23_PF_SD1_CLK,
/* NFC */
PF0_PF_NRFB,
PF1_PF_NFCE,
PF2_PF_NFWP,
PF3_PF_NFCLE,
PF4_PF_NFALE,
PF5_PF_NFRE,
PF6_PF_NFWE,
PF7_PF_NFIO0,
PF8_PF_NFIO1,
PF9_PF_NFIO2,
PF10_PF_NFIO3,
PF11_PF_NFIO4,
PF12_PF_NFIO5,
PF13_PF_NFIO6,
PF14_PF_NFIO7,
};
/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */
static struct physmap_flash_data mx21ads_flash_data = {
.width = 4,
};
static struct resource mx21ads_flash_resource =
DEFINE_RES_MEM(MX21_CS0_BASE_ADDR, SZ_32M);
static struct platform_device mx21ads_nor_mtd_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &mx21ads_flash_data,
},
.num_resources = 1,
.resource = &mx21ads_flash_resource,
};
static struct resource mx21ads_cs8900_resources[] __initdata = {
DEFINE_RES_MEM(MX21ADS_CS8900A_REG, SZ_1K),
/* irq number is run-time assigned */
DEFINE_RES_IRQ(-1),
};
static const struct platform_device_info mx21ads_cs8900_devinfo __initconst = {
.name = "cs89x0",
.id = 0,
.res = mx21ads_cs8900_resources,
.num_res = ARRAY_SIZE(mx21ads_cs8900_resources),
};
static const struct imxuart_platform_data uart_pdata_rts __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static const struct imxuart_platform_data uart_pdata_norts __initconst = {
};
static struct resource mx21ads_mmgpio_resource =
DEFINE_RES_MEM_NAMED(MX21ADS_IO_REG, SZ_2, "dat");
static struct bgpio_pdata mx21ads_mmgpio_pdata = {
.label = "mx21ads-mmgpio",
.base = MX21ADS_MMGPIO_BASE,
.ngpio = 16,
};
static struct platform_device mx21ads_mmgpio = {
.name = "basic-mmio-gpio",
.id = PLATFORM_DEVID_AUTO,
.resource = &mx21ads_mmgpio_resource,
.num_resources = 1,
.dev = {
.platform_data = &mx21ads_mmgpio_pdata,
},
};
static struct regulator_consumer_supply mx21ads_lcd_regulator_consumer =
REGULATOR_SUPPLY("lcd", "imx-fb.0");
static struct regulator_init_data mx21ads_lcd_regulator_init_data = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.consumer_supplies = &mx21ads_lcd_regulator_consumer,
.num_consumer_supplies = 1,
};
static struct fixed_voltage_config mx21ads_lcd_regulator_pdata = {
.supply_name = "LCD",
.microvolts = 3300000,
.init_data = &mx21ads_lcd_regulator_init_data,
};
static struct platform_device mx21ads_lcd_regulator = {
.name = "reg-fixed-voltage",
.id = PLATFORM_DEVID_AUTO,
.dev = {
.platform_data = &mx21ads_lcd_regulator_pdata,
},
};
static struct gpiod_lookup_table mx21ads_lcd_regulator_gpiod_table = {
.dev_id = "reg-fixed-voltage.0", /* Let's hope ID 0 is what we get */
.table = {
GPIO_LOOKUP("mx21ads-mmgpio", 9, NULL, GPIO_ACTIVE_HIGH),
{ },
},
};
/*
* Connected is a portrait Sharp-QVGA display
* of type: LQ035Q7DB02
*/
static struct imx_fb_videomode mx21ads_modes[] = {
{
.mode = {
.name = "Sharp-LQ035Q7",
.refresh = 60,
.xres = 240,
.yres = 320,
.pixclock = 188679, /* in ps (5.3MHz) */
.hsync_len = 2,
.left_margin = 6,
.right_margin = 16,
.vsync_len = 1,
.upper_margin = 8,
.lower_margin = 10,
},
.pcr = 0xfb108bc7,
.bpp = 16,
},
};
static const struct imx_fb_platform_data mx21ads_fb_data __initconst = {
.mode = mx21ads_modes,
.num_modes = ARRAY_SIZE(mx21ads_modes),
.pwmr = 0x00a903ff,
.lscr1 = 0x00120300,
.dmacr = 0x00020008,
};
static int mx21ads_sdhc_get_ro(struct device *dev)
{
return gpio_get_value(MX21ADS_IO_SD_WP);
}
static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
int ret;
ret = gpio_request(MX21ADS_IO_SD_WP, "mmc-ro");
if (ret)
return ret;
return request_irq(gpio_to_irq(MX21ADS_MMC_CD), detect_irq,
IRQF_TRIGGER_FALLING, "mmc-detect", data);
}
static void mx21ads_sdhc_exit(struct device *dev, void *data)
{
free_irq(gpio_to_irq(MX21ADS_MMC_CD), data);
gpio_free(MX21ADS_IO_SD_WP);
}
static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = {
.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */
.get_ro = mx21ads_sdhc_get_ro,
.init = mx21ads_sdhc_init,
.exit = mx21ads_sdhc_exit,
};
static const struct mxc_nand_platform_data
mx21ads_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
};
static struct platform_device *platform_devices[] __initdata = {
&mx21ads_mmgpio,
&mx21ads_lcd_regulator,
&mx21ads_nor_mtd_device,
};
static void __init mx21ads_board_init(void)
{
imx21_soc_init();
mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
"mx21ads");
imx21_add_imx_uart0(&uart_pdata_rts);
imx21_add_imx_uart2(&uart_pdata_norts);
imx21_add_imx_uart3(&uart_pdata_rts);
imx21_add_mxc_nand(&mx21ads_nand_board_info);
imx21_add_imx_fb(&mx21ads_fb_data);
}
static void __init mx21ads_late_init(void)
{
imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata);
gpiod_add_lookup_table(&mx21ads_lcd_regulator_gpiod_table);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
mx21ads_cs8900_resources[1].start =
gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO);
mx21ads_cs8900_resources[1].end =
gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO);
platform_device_register_full(&mx21ads_cs8900_devinfo);
}
static void __init mx21ads_timer_init(void)
{
mx21_clocks_init(32768, 26000000);
}
MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
/* maintainer: Freescale Semiconductor, Inc. */
.atag_offset = 0x100,
.map_io = mx21_map_io,
.init_early = imx21_init_early,
.init_irq = mx21_init_irq,
.init_time = mx21ads_timer_init,
.init_machine = mx21ads_board_init,
.init_late = mx21ads_late_init,
.restart = mxc_restart,
MACHINE_END
arch/arm/mach-imx/mach-mx27_3ds.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
*/
/*
* This machine is known as:
* - i.MX27 3-Stack Development System
* - i.MX27 Platform Development Kit (i.MX27 PDK)
*/
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/gpio/machine.h>
#include <linux/irq.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/delay.h>
#include <linux/mfd/mc13783.h>
#include <linux/spi/spi.h>
#include <linux/regulator/machine.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx27.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx27.h"
#include "ulpi.h"
#define SD1_EN_GPIO IMX_GPIO_NR(2, 25)
#define OTG_PHY_RESET_GPIO IMX_GPIO_NR(2, 23)
#define SPI2_SS0 IMX_GPIO_NR(4, 21)
#define PMIC_INT IMX_GPIO_NR(3, 14)
#define SPI1_SS0 IMX_GPIO_NR(4, 28)
#define SD1_CD IMX_GPIO_NR(2, 26)
#define LCD_RESET IMX_GPIO_NR(1, 3)
#define LCD_ENABLE IMX_GPIO_NR(1, 31)
static const int mx27pdk_pins[] __initconst = {
/* UART1 */
PE12_PF_UART1_TXD,
PE13_PF_UART1_RXD,
PE14_PF_UART1_CTS,
PE15_PF_UART1_RTS,
/* FEC */
PD0_AIN_FEC_TXD0,
PD1_AIN_FEC_TXD1,
PD2_AIN_FEC_TXD2,
PD3_AIN_FEC_TXD3,
PD4_AOUT_FEC_RX_ER,
PD5_AOUT_FEC_RXD1,
PD6_AOUT_FEC_RXD2,
PD7_AOUT_FEC_RXD3,
PD8_AF_FEC_MDIO,
PD9_AIN_FEC_MDC,
PD10_AOUT_FEC_CRS,
PD11_AOUT_FEC_TX_CLK,
PD12_AOUT_FEC_RXD0,
PD13_AOUT_FEC_RX_DV,
PD14_AOUT_FEC_RX_CLK,
PD15_AOUT_FEC_COL,
PD16_AIN_FEC_TX_ER,
PF23_AIN_FEC_TX_EN,
/* SDHC1 */
PE18_PF_SD1_D0,
PE19_PF_SD1_D1,
PE20_PF_SD1_D2,
PE21_PF_SD1_D3,
PE22_PF_SD1_CMD,
PE23_PF_SD1_CLK,
SD1_EN_GPIO | GPIO_GPIO | GPIO_OUT,
/* OTG */
OTG_PHY_RESET_GPIO | GPIO_GPIO | GPIO_OUT,
PC7_PF_USBOTG_DATA5,
PC8_PF_USBOTG_DATA6,
PC9_PF_USBOTG_DATA0,
PC10_PF_USBOTG_DATA2,
PC11_PF_USBOTG_DATA1,
PC12_PF_USBOTG_DATA4,
PC13_PF_USBOTG_DATA3,
PE0_PF_USBOTG_NXT,
PE1_PF_USBOTG_STP,
PE2_PF_USBOTG_DIR,
PE24_PF_USBOTG_CLK,
PE25_PF_USBOTG_DATA7,
/* CSPI1 */
PD31_PF_CSPI1_MOSI,
PD30_PF_CSPI1_MISO,
PD29_PF_CSPI1_SCLK,
PD25_PF_CSPI1_RDY,
SPI1_SS0 | GPIO_GPIO | GPIO_OUT,
/* CSPI2 */
PD22_PF_CSPI2_SCLK,
PD23_PF_CSPI2_MISO,
PD24_PF_CSPI2_MOSI,
SPI2_SS0 | GPIO_GPIO | GPIO_OUT,
/* I2C1 */
PD17_PF_I2C_DATA,
PD18_PF_I2C_CLK,
/* PMIC INT */
PMIC_INT | GPIO_GPIO | GPIO_IN,
/* LCD */
PA5_PF_LSCLK,
PA6_PF_LD0,
PA7_PF_LD1,
PA8_PF_LD2,
PA9_PF_LD3,
PA10_PF_LD4,
PA11_PF_LD5,
PA12_PF_LD6,
PA13_PF_LD7,
PA14_PF_LD8,
PA15_PF_LD9,
PA16_PF_LD10,
PA17_PF_LD11,
PA18_PF_LD12,
PA19_PF_LD13,
PA20_PF_LD14,
PA21_PF_LD15,
PA22_PF_LD16,
PA23_PF_LD17,
PA28_PF_HSYNC,
PA29_PF_VSYNC,
PA30_PF_CONTRAST,
LCD_ENABLE | GPIO_GPIO | GPIO_OUT,
LCD_RESET | GPIO_GPIO | GPIO_OUT,
/* SSI4 */
PC16_PF_SSI4_FS,
PC17_PF_SSI4_RXD,
PC18_PF_SSI4_TXD,
PC19_PF_SSI4_CLK,
};
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
/*
* Matrix keyboard
*/
static const uint32_t mx27_3ds_keymap[] = {
KEY(0, 0, KEY_UP),
KEY(0, 1, KEY_DOWN),
KEY(1, 0, KEY_RIGHT),
KEY(1, 1, KEY_LEFT),
KEY(1, 2, KEY_ENTER),
KEY(2, 0, KEY_F6),
KEY(2, 1, KEY_F8),
KEY(2, 2, KEY_F9),
KEY(2, 3, KEY_F10),
};
static const struct matrix_keymap_data mx27_3ds_keymap_data __initconst = {
.keymap = mx27_3ds_keymap,
.keymap_size = ARRAY_SIZE(mx27_3ds_keymap),
};
static int mx27_3ds_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
return request_irq(gpio_to_irq(SD1_CD), detect_irq,
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
}
static void mx27_3ds_sdhc1_exit(struct device *dev, void *data)
{
free_irq(gpio_to_irq(SD1_CD), data);
}
static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
.init = mx27_3ds_sdhc1_init,
.exit = mx27_3ds_sdhc1_exit,
};
static void mx27_3ds_sdhc1_enable_level_translator(void)
{
/* Turn on TXB0108 OE pin */
gpio_request(SD1_EN_GPIO, "sd1_enable");
gpio_direction_output(SD1_EN_GPIO, 1);
}
static int otg_phy_init(void)
{
gpio_request(OTG_PHY_RESET_GPIO, "usb-otg-reset");
gpio_direction_output(OTG_PHY_RESET_GPIO, 0);
mdelay(1);
gpio_set_value(OTG_PHY_RESET_GPIO, 1);
return 0;
}
static int mx27_3ds_otg_init(struct platform_device *pdev)
{
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
}
static struct mxc_usbh_platform_data otg_pdata __initdata = {
.init = mx27_3ds_otg_init,
.portsc = MXC_EHCI_MODE_ULPI,
};
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
};
static bool otg_mode_host __initdata;
static int __init mx27_3ds_otg_mode(char *options)
{
if (!strcmp(options, "host"))
otg_mode_host = true;
else if (!strcmp(options, "device"))
otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
return 1;
}
__setup("otg_mode=", mx27_3ds_otg_mode);
/* Regulators */
static struct regulator_init_data gpo_init = {
.constraints = {
.boot_on = 1,
.always_on = 1,
}
};
static struct regulator_consumer_supply vmmc1_consumers[] = {
REGULATOR_SUPPLY("vcore", "spi0.0"),
};
static struct regulator_init_data vmmc1_init = {
.constraints = {
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers),
.consumer_supplies = vmmc1_consumers,
};
static struct regulator_consumer_supply vgen_consumers[] = {
REGULATOR_SUPPLY("vdd", "spi0.0"),
};
static struct regulator_init_data vgen_init = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
},
.num_consumer_supplies = ARRAY_SIZE(vgen_consumers),
.consumer_supplies = vgen_consumers,
};
static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = {
{
.id = MC13783_REG_VMMC1,
.init_data = &vmmc1_init,
}, {
.id = MC13783_REG_VGEN,
.init_data = &vgen_init,
}, {
.id = MC13783_REG_GPO1, /* Turn on 1.8V */
.init_data = &gpo_init,
}, {
.id = MC13783_REG_GPO3, /* Turn on 3.3V */
.init_data = &gpo_init,
},
};
/* MC13783 */
static struct mc13xxx_codec_platform_data mx27_3ds_codec = {
.dac_ssi_port = MC13783_SSI1_PORT,
.adc_ssi_port = MC13783_SSI1_PORT,
};
static struct mc13xxx_platform_data mc13783_pdata = {
.regulators = {
.regulators = mx27_3ds_regulators,
.num_regulators = ARRAY_SIZE(mx27_3ds_regulators),
},
.flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC |
MC13XXX_USE_CODEC,
.codec = &mx27_3ds_codec,
};
static struct imx_ssi_platform_data mx27_3ds_ssi_pdata = {
.flags = IMX_SSI_DMA | IMX_SSI_NET,
};
/* SPI */
static struct gpiod_lookup_table mx27_spi1_gpiod_table = {
.dev_id = "imx27-cspi.0", /* Actual device name for spi1 */
.table = {
/*
* The i.MX27 has the i.MX21 GPIO controller, the SPI1 CS GPIO
* SPI1_SS0 is numbered IMX_GPIO_NR(4, 28).
*
* This is in "bank 4" which is subtracted by one in the macro
* so this is actually bank 3 on "imx21-gpio.3".
*/
GPIO_LOOKUP_IDX("imx21-gpio.3", 28, "cs", 0, GPIO_ACTIVE_LOW),
{ },
},
};
static struct gpiod_lookup_table mx27_spi2_gpiod_table = {
.dev_id = "imx27-cspi.1", /* Actual device name for spi2 */
.table = {
/*
* The i.MX27 has the i.MX21 GPIO controller, the SPI2 CS GPIO
* SPI2_SS0 is numbered IMX_GPIO_NR(4, 21).
*
* This is in "bank 4" which is subtracted by one in the macro
* so this is actually bank 3 on "imx21-gpio.3".
*/
GPIO_LOOKUP_IDX("imx21-gpio.3", 21, "cs", 0, GPIO_ACTIVE_LOW),
{ },
},
};
static struct imx_fb_videomode mx27_3ds_modes[] = {
{ /* 480x640 @ 60 Hz */
.mode = {
.name = "Epson-VGA",
.refresh = 60,
.xres = 480,
.yres = 640,
.pixclock = 41701,
.left_margin = 20,
.right_margin = 41,
.upper_margin = 10,
.lower_margin = 5,
.hsync_len = 20,
.vsync_len = 10,
.sync = FB_SYNC_OE_ACT_HIGH |
FB_SYNC_CLK_INVERT,
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
},
.bpp = 16,
.pcr = 0xFAC08B82,
},
};
static const struct imx_fb_platform_data mx27_3ds_fb_data __initconst = {
.mode = mx27_3ds_modes,
.num_modes = ARRAY_SIZE(mx27_3ds_modes),
.pwmr = 0x00A903FF,
.lscr1 = 0x00120300,
.dmacr = 0x00020010,
};
/* LCD */
static struct gpiod_lookup_table mx27_3ds_lcd_gpiod_table = {
.dev_id = "spi0.0", /* Bus 0 chipselect 0 */
.table = {
/*
* The i.MX27 has the i.MX21 GPIO controller, the GPIOs
* numbered IMX_GPIO_NR(1, 3) and IMX_GPIO_NR(1, 31)
* are in "bank 1" which is subtracted by one in the macro
* so these are actually bank 0 on "imx21-gpio.0".
*/
GPIO_LOOKUP("imx21-gpio.0", 3, "reset", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("imx21-gpio.0", 31, "enable", GPIO_ACTIVE_HIGH),
{ },
},
};
static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
{
.modalias = "mc13783",
.max_speed_hz = 1000000,
.bus_num = 1,
.chip_select = 0, /* SS0 */
.platform_data = &mc13783_pdata,
/* irq number is run-time assigned */
.mode = SPI_CS_HIGH,
}, {
.modalias = "l4f00242t03",
.max_speed_hz = 5000000,
.bus_num = 0,
.chip_select = 0, /* SS0 */
},
};
static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
.bitrate = 100000,
};
static void __init mx27pdk_init(void)
{
imx27_soc_init();
mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
"mx27pdk");
imx27_add_imx_uart0(&uart_pdata);
imx27_add_fec(NULL);
imx27_add_imx_keypad(&mx27_3ds_keymap_data);
imx27_add_imx2_wdt();
imx27_add_spi_imx1(&mx27_spi2_gpiod_table);
imx27_add_spi_imx0(&mx27_spi1_gpiod_table);
imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
imx27_add_imx_fb(&mx27_3ds_fb_data);
imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
}
static void __init mx27pdk_late_init(void)
{
mx27_3ds_sdhc1_enable_level_translator();
imx27_add_mxc_mmc(0, &sdhc1_pdata);
otg_phy_init();
if (otg_mode_host) {
otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (otg_pdata.otg)
imx27_add_mxc_ehci_otg(&otg_pdata);
}
if (!otg_mode_host)
imx27_add_fsl_usb2_udc(&otg_device_pdata);
gpiod_add_lookup_table(&mx27_3ds_lcd_gpiod_table);
mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT);
spi_register_board_info(mx27_3ds_spi_devs,
ARRAY_SIZE(mx27_3ds_spi_devs));
if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28)))
pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
}
static void __init mx27pdk_timer_init(void)
{
mx27_clocks_init(26000000);
}
MACHINE_START(MX27_3DS, "Freescale MX27PDK")
/* maintainer: Freescale Semiconductor, Inc. */
.atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
.init_time = mx27pdk_timer_init,
.init_machine = mx27pdk_init,
.init_late = mx27pdk_late_init,
.restart = mxc_restart,
MACHINE_END
arch/arm/mach-imx/mach-mx27ads.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright (C) 2002 Shane Nay (shane@minirl.com)
* Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
*/
#include <linux/gpio/driver.h>
/* Needed for gpio_to_irq() */
#include <linux/gpio.h>
#include <linux/gpio/machine.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include "common.h"
#include "devices-imx27.h"
#include "hardware.h"
#include "iomux-mx27.h"
/*
* Base address of PBC controller, CS4
*/
#define PBC_BASE_ADDRESS 0xf4300000
#define PBC_REG_ADDR(offset) (void __force __iomem *) \
(PBC_BASE_ADDRESS + (offset))
/* When the PBC address connection is fixed in h/w, defined as 1 */
#define PBC_ADDR_SH 0
/* Offsets for the PBC Controller register */
/*
* PBC Board version register offset
*/
#define PBC_VERSION_REG PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
/*
* PBC Board control register 1 set address.
*/
#define PBC_BCTRL1_SET_REG PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
/*
* PBC Board control register 1 clear address.
*/
#define PBC_BCTRL1_CLEAR_REG PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
/* PBC Board Control Register 1 bit definitions */
#define PBC_BCTRL1_LCDON 0x0800 /* Enable the LCD */
/* to determine the correct external crystal reference */
#define CKIH_27MHZ_BIT_SET (1 << 3)
static const int mx27ads_pins[] __initconst = {
/* UART0 */
PE12_PF_UART1_TXD,
PE13_PF_UART1_RXD,
PE14_PF_UART1_CTS,
PE15_PF_UART1_RTS,
/* UART1 */
PE3_PF_UART2_CTS,
PE4_PF_UART2_RTS,
PE6_PF_UART2_TXD,
PE7_PF_UART2_RXD,
/* UART2 */
PE8_PF_UART3_TXD,
PE9_PF_UART3_RXD,
PE10_PF_UART3_CTS,
PE11_PF_UART3_RTS,
/* UART3 */
PB26_AF_UART4_RTS,
PB28_AF_UART4_TXD,
PB29_AF_UART4_CTS,
PB31_AF_UART4_RXD,
/* UART4 */
PB18_AF_UART5_TXD,
PB19_AF_UART5_RXD,
PB20_AF_UART5_CTS,
PB21_AF_UART5_RTS,
/* UART5 */
PB10_AF_UART6_TXD,
PB12_AF_UART6_CTS,
PB11_AF_UART6_RXD,
PB13_AF_UART6_RTS,
/* FEC */
PD0_AIN_FEC_TXD0,
PD1_AIN_FEC_TXD1,
PD2_AIN_FEC_TXD2,
PD3_AIN_FEC_TXD3,
PD4_AOUT_FEC_RX_ER,
PD5_AOUT_FEC_RXD1,
PD6_AOUT_FEC_RXD2,
PD7_AOUT_FEC_RXD3,
PD8_AF_FEC_MDIO,
PD9_AIN_FEC_MDC,
PD10_AOUT_FEC_CRS,
PD11_AOUT_FEC_TX_CLK,
PD12_AOUT_FEC_RXD0,
PD13_AOUT_FEC_RX_DV,
PD14_AOUT_FEC_RX_CLK,
PD15_AOUT_FEC_COL,
PD16_AIN_FEC_TX_ER,
PF23_AIN_FEC_TX_EN,
/* I2C2 */
PC5_PF_I2C2_SDA,
PC6_PF_I2C2_SCL,
/* FB */
PA5_PF_LSCLK,
PA6_PF_LD0,
PA7_PF_LD1,
PA8_PF_LD2,
PA9_PF_LD3,
PA10_PF_LD4,
PA11_PF_LD5,
PA12_PF_LD6,
PA13_PF_LD7,
PA14_PF_LD8,
PA15_PF_LD9,
PA16_PF_LD10,
PA17_PF_LD11,
PA18_PF_LD12,
PA19_PF_LD13,
PA20_PF_LD14,
PA21_PF_LD15,
PA22_PF_LD16,
PA23_PF_LD17,
PA24_PF_REV,
PA25_PF_CLS,
PA26_PF_PS,
PA27_PF_SPL_SPR,
PA28_PF_HSYNC,
PA29_PF_VSYNC,
PA30_PF_CONTRAST,
PA31_PF_OE_ACD,
/* OWIRE */
PE16_AF_OWIRE,
/* SDHC1*/
PE18_PF_SD1_D0,
PE19_PF_SD1_D1,
PE20_PF_SD1_D2,
PE21_PF_SD1_D3,
PE22_PF_SD1_CMD,
PE23_PF_SD1_CLK,
/* SDHC2*/
PB4_PF_SD2_D0,
PB5_PF_SD2_D1,
PB6_PF_SD2_D2,
PB7_PF_SD2_D3,
PB8_PF_SD2_CMD,
PB9_PF_SD2_CLK,
};
static const struct mxc_nand_platform_data
mx27ads_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
};
/* ADS's NOR flash */
static struct physmap_flash_data mx27ads_flash_data = {
.width = 2,
};
static struct resource mx27ads_flash_resource = {
.start = 0xc0000000,
.end = 0xc0000000 + 0x02000000 - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device mx27ads_nor_mtd_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &mx27ads_flash_data,
},
.num_resources = 1,
.resource = &mx27ads_flash_resource,
};
static const struct imxi2c_platform_data mx27ads_i2c1_data __initconst = {
.bitrate = 100000,
};
static struct i2c_board_info mx27ads_i2c_devices[] = {
};
static void vgpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
if (value)
imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
else
imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
}
static int vgpio_dir_out(struct gpio_chip *chip, unsigned offset, int value)
{
return 0;
}
#define MX27ADS_LCD_GPIO (6 * 32)
static struct regulator_consumer_supply mx27ads_lcd_regulator_consumer =
REGULATOR_SUPPLY("lcd", "imx-fb.0");
static struct regulator_init_data mx27ads_lcd_regulator_init_data = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.consumer_supplies = &mx27ads_lcd_regulator_consumer,
.num_consumer_supplies = 1,
};
static struct fixed_voltage_config mx27ads_lcd_regulator_pdata = {
.supply_name = "LCD",
.microvolts = 3300000,
.init_data = &mx27ads_lcd_regulator_init_data,
};
static struct gpiod_lookup_table mx27ads_lcd_regulator_gpiod_table = {
.dev_id = "reg-fixed-voltage.0", /* Let's hope ID 0 is what we get */
.table = {
GPIO_LOOKUP("LCD", 0, NULL, GPIO_ACTIVE_LOW),
{ },
},
};
static void __init mx27ads_regulator_init(void)
{
struct gpio_chip *vchip;
vchip = kzalloc(sizeof(*vchip), GFP_KERNEL);
vchip->owner = THIS_MODULE;
vchip->label = "LCD";
vchip->base = MX27ADS_LCD_GPIO;
vchip->ngpio = 1;
vchip->direction_output = vgpio_dir_out;
vchip->set = vgpio_set;
gpiochip_add_data(vchip, NULL);
gpiod_add_lookup_table(&mx27ads_lcd_regulator_gpiod_table);
platform_device_register_data(NULL, "reg-fixed-voltage",
PLATFORM_DEVID_AUTO,
&mx27ads_lcd_regulator_pdata,
sizeof(mx27ads_lcd_regulator_pdata));
}
static struct imx_fb_videomode mx27ads_modes[] = {
{
.mode = {
.name = "Sharp-LQ035Q7",
.refresh = 60,
.xres = 240,
.yres = 320,
.pixclock = 188679, /* in ps (5.3MHz) */
.hsync_len = 1,
.left_margin = 9,
.right_margin = 16,
.vsync_len = 1,
.upper_margin = 7,
.lower_margin = 9,
},
.bpp = 16,
.pcr = 0xFB008BC0,
},
};
static const struct imx_fb_platform_data mx27ads_fb_data __initconst = {
.mode = mx27ads_modes,
.num_modes = ARRAY_SIZE(mx27ads_modes),
/*
* - HSYNC active high
* - VSYNC active high
* - clk notenabled while idle
* - clock inverted
* - data not inverted
* - data enable low active
* - enable sharp mode
*/
.pwmr = 0x00A903FF,
.lscr1 = 0x00120300,
.dmacr = 0x00020010,
};
static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
return request_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), detect_irq,
IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
}
static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
return request_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), detect_irq,
IRQF_TRIGGER_RISING, "sdhc2-card-detect", data);
}
static void mx27ads_sdhc1_exit(struct device *dev, void *data)
{
free_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), data);
}
static void mx27ads_sdhc2_exit(struct device *dev, void *data)
{
free_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), data);
}
static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
.init = mx27ads_sdhc1_init,
.exit = mx27ads_sdhc1_exit,
};
static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
.init = mx27ads_sdhc2_init,
.exit = mx27ads_sdhc2_exit,
};
static struct platform_device *platform_devices[] __initdata = {
&mx27ads_nor_mtd_device,
};
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static void __init mx27ads_board_init(void)
{
imx27_soc_init();
mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
"mx27ads");
imx27_add_imx_uart0(&uart_pdata);
imx27_add_imx_uart1(&uart_pdata);
imx27_add_imx_uart2(&uart_pdata);
imx27_add_imx_uart3(&uart_pdata);
imx27_add_imx_uart4(&uart_pdata);
imx27_add_imx_uart5(&uart_pdata);
imx27_add_mxc_nand(&mx27ads_nand_board_info);
/* only the i2c master 1 is used on this CPU card */
i2c_register_board_info(1, mx27ads_i2c_devices,
ARRAY_SIZE(mx27ads_i2c_devices));
imx27_add_imx_i2c(1, &mx27ads_i2c1_data);
imx27_add_imx_fb(&mx27ads_fb_data);
imx27_add_fec(NULL);
imx27_add_mxc_w1();
}
static void __init mx27ads_late_init(void)
{
mx27ads_regulator_init();
imx27_add_mxc_mmc(0, &sdhc1_pdata);
imx27_add_mxc_mmc(1, &sdhc2_pdata);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
static void __init mx27ads_timer_init(void)
{
unsigned long fref = 26000000;
if ((imx_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
fref = 27000000;
mx27_clocks_init(fref);
}
static struct map_desc mx27ads_io_desc[] __initdata = {
{
.virtual = PBC_BASE_ADDRESS,
.pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR),
.length = SZ_1M,
.type = MT_DEVICE,
},
};
static void __init mx27ads_map_io(void)
{
mx27_map_io();
iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
}
MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
/* maintainer: Freescale Semiconductor, Inc. */
.atag_offset = 0x100,
.map_io = mx27ads_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
.init_time = mx27ads_timer_init,
.init_machine = mx27ads_board_init,
.init_late = mx27ads_late_init,
.restart = mxc_restart,
MACHINE_END
arch/arm/mach-imx/mach-mx31_3ds.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
*/
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/gpio/machine.h>
#include <linux/platform_device.h>
#include <linux/mfd/mc13783.h>
#include <linux/spi/spi.h>
#include <linux/regulator/machine.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx31.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
static int mx31_3ds_pins[] = {
/* UART1 */
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
/*SPI0*/
IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_ALT1),
IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_ALT1),
/* SPI 1 */
MX31_PIN_CSPI2_SCLK__SCLK,
MX31_PIN_CSPI2_MOSI__MOSI,
MX31_PIN_CSPI2_MISO__MISO,
MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
MX31_PIN_CSPI2_SS0__SS0,
MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */
/* MC13783 IRQ */
IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO),
/* USB OTG reset */
IOMUX_MODE(MX31_PIN_USB_PWR, IOMUX_CONFIG_GPIO),
/* USB OTG */
MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
MX31_PIN_USBOTG_CLK__USBOTG_CLK,
MX31_PIN_USBOTG_DIR__USBOTG_DIR,
MX31_PIN_USBOTG_NXT__USBOTG_NXT,
MX31_PIN_USBOTG_STP__USBOTG_STP,
/*Keyboard*/
MX31_PIN_KEY_ROW0_KEY_ROW0,
MX31_PIN_KEY_ROW1_KEY_ROW1,
MX31_PIN_KEY_ROW2_KEY_ROW2,
MX31_PIN_KEY_COL0_KEY_COL0,
MX31_PIN_KEY_COL1_KEY_COL1,
MX31_PIN_KEY_COL2_KEY_COL2,
MX31_PIN_KEY_COL3_KEY_COL3,
/* USB Host 2 */
IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT1),
IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT1),
IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT1),
IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT1),
IOMUX_MODE(MX31_PIN_IOIS16, IOMUX_CONFIG_ALT1),
IOMUX_MODE(MX31_PIN_PC_RW_B, IOMUX_CONFIG_ALT1),
/* USB Host2 reset */
IOMUX_MODE(MX31_PIN_USB_BYP, IOMUX_CONFIG_GPIO),
/* I2C1 */
MX31_PIN_I2C_CLK__I2C1_SCL,
MX31_PIN_I2C_DAT__I2C1_SDA,
/* SDHC1 */
MX31_PIN_SD1_DATA3__SD1_DATA3,
MX31_PIN_SD1_DATA2__SD1_DATA2,
MX31_PIN_SD1_DATA1__SD1_DATA1,
MX31_PIN_SD1_DATA0__SD1_DATA0,
MX31_PIN_SD1_CLK__SD1_CLK,
MX31_PIN_SD1_CMD__SD1_CMD,
MX31_PIN_GPIO3_1__GPIO3_1, /* Card detect */
MX31_PIN_GPIO3_0__GPIO3_0, /* OE */
/* Framebuffer */
MX31_PIN_LD0__LD0,
MX31_PIN_LD1__LD1,
MX31_PIN_LD2__LD2,
MX31_PIN_LD3__LD3,
MX31_PIN_LD4__LD4,
MX31_PIN_LD5__LD5,
MX31_PIN_LD6__LD6,
MX31_PIN_LD7__LD7,
MX31_PIN_LD8__LD8,
MX31_PIN_LD9__LD9,
MX31_PIN_LD10__LD10,
MX31_PIN_LD11__LD11,
MX31_PIN_LD12__LD12,
MX31_PIN_LD13__LD13,
MX31_PIN_LD14__LD14,
MX31_PIN_LD15__LD15,
MX31_PIN_LD16__LD16,
MX31_PIN_LD17__LD17,
MX31_PIN_VSYNC3__VSYNC3,
MX31_PIN_HSYNC__HSYNC,
MX31_PIN_FPSHIFT__FPSHIFT,
MX31_PIN_CONTRAST__CONTRAST,
/* SSI */
MX31_PIN_STXD4__STXD4,
MX31_PIN_SRXD4__SRXD4,
MX31_PIN_SCK4__SCK4,
MX31_PIN_SFS4__SFS4,
};
/*
* FB support
*/
static const struct fb_videomode fb_modedb[] = {
{ /* 480x640 @ 60 Hz */
.name = "Epson-VGA",
.refresh = 60,
.xres = 480,
.yres = 640,
.pixclock = 41701,
.left_margin = 20,
.right_margin = 41,
.upper_margin = 10,
.lower_margin = 5,
.hsync_len = 20,
.vsync_len = 10,
.sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
},
};
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "Epson-VGA",
.mode = fb_modedb,
.num_modes = ARRAY_SIZE(fb_modedb),
};
/* LCD */
static struct gpiod_lookup_table mx31_3ds_lcd_gpiod_table = {
.dev_id = "spi0.2", /* Bus 0 chipselect 2 */
.table = {
/*
* "reset" has IOMUX_TO_GPIO(IOMUX_PIN(88, 28)).
* The macro only shifts 88 to bits 9..16 and then
* mask it and shift it back. The GPIO number is 88.
* 88 is 2*32+24
*/
GPIO_LOOKUP("imx31-gpio.2", 24, "reset", GPIO_ACTIVE_HIGH),
/*
* Same reasoning as above for
* IOMUX_TO_GPIO(IOMUX_PIN(89, 27), pin 89 is 2*32+25.
*/
GPIO_LOOKUP("imx31-gpio.2", 25, "enable", GPIO_ACTIVE_HIGH),
{ },
},
};
/*
* Support for SD card slot in personality board
*/
#define MX31_3DS_GPIO_SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
#define MX31_3DS_GPIO_SDHC1_BE IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
static struct gpio mx31_3ds_sdhc1_gpios[] = {
{ MX31_3DS_GPIO_SDHC1_CD, GPIOF_IN, "sdhc1-card-detect" },
{ MX31_3DS_GPIO_SDHC1_BE, GPIOF_OUT_INIT_LOW, "sdhc1-bus-en" },
};
static int mx31_3ds_sdhc1_init(struct device *dev,
irq_handler_t detect_irq,
void *data)
{
int ret;
ret = gpio_request_array(mx31_3ds_sdhc1_gpios,
ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
if (ret) {
pr_warn("Unable to request the SD/MMC GPIOs.\n");
return ret;
}
ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)),
detect_irq,
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"sdhc1-detect", data);
if (ret) {
pr_warn("Unable to request the SD/MMC card-detect IRQ.\n");
goto gpio_free;
}
return 0;
gpio_free:
gpio_free_array(mx31_3ds_sdhc1_gpios,
ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
return ret;
}
static void mx31_3ds_sdhc1_exit(struct device *dev, void *data)
{
free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)), data);
gpio_free_array(mx31_3ds_sdhc1_gpios,
ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
}
static void mx31_3ds_sdhc1_setpower(struct device *dev, unsigned int vdd)
{
/*
* While the voltage stuff is done by the driver, activate the
* Buffer Enable Pin only if there is a card in slot to fix the card
* voltage issue caused by bi-directional chip TXB0108 on 3Stack.
* Done here because at this stage we have for sure a debounced value
* of the presence of the card, showed by the value of vdd.
* 7 == ilog2(MMC_VDD_165_195)
*/
if (vdd > 7)
gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 1);
else
gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 0);
}
static struct imxmmc_platform_data sdhc1_pdata = {
.init = mx31_3ds_sdhc1_init,
.exit = mx31_3ds_sdhc1_exit,
.setpower = mx31_3ds_sdhc1_setpower,
};
/*
* Matrix keyboard
*/
static const uint32_t mx31_3ds_keymap[] = {
KEY(0, 0, KEY_UP),
KEY(0, 1, KEY_DOWN),
KEY(1, 0, KEY_RIGHT),
KEY(1, 1, KEY_LEFT),
KEY(1, 2, KEY_ENTER),
KEY(2, 0, KEY_F6),
KEY(2, 1, KEY_F8),
KEY(2, 2, KEY_F9),
KEY(2, 3, KEY_F10),
};
static const struct matrix_keymap_data mx31_3ds_keymap_data __initconst = {
.keymap = mx31_3ds_keymap,
.keymap_size = ARRAY_SIZE(mx31_3ds_keymap),
};
/* Regulators */
static struct regulator_init_data pwgtx_init = {
.constraints = {
.boot_on = 1,
.always_on = 1,
},
};
static struct regulator_init_data gpo_init = {
.constraints = {
.boot_on = 1,
.always_on = 1,
}
};
static struct regulator_consumer_supply vmmc2_consumers[] = {
REGULATOR_SUPPLY("vmmc", "imx31-mmc.0"),
};
static struct regulator_init_data vmmc2_init = {
.constraints = {
.min_uV = 3000000,
.max_uV = 3000000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(vmmc2_consumers),
.consumer_supplies = vmmc2_consumers,
};
static struct regulator_consumer_supply vmmc1_consumers[] = {
REGULATOR_SUPPLY("vcore", "spi0.0"),
};
static struct regulator_init_data vmmc1_init = {
.constraints = {
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers),
.consumer_supplies = vmmc1_consumers,
};
static struct regulator_consumer_supply vgen_consumers[] = {
REGULATOR_SUPPLY("vdd", "spi0.0"),
};
static struct regulator_init_data vgen_init = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(vgen_consumers),
.consumer_supplies = vgen_consumers,
};
static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = {
{
.id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */
.init_data = &pwgtx_init,
}, {
.id = MC13783_REG_PWGT2SPI, /* Power Gate for L2 Cache. */
.init_data = &pwgtx_init,
}, {
.id = MC13783_REG_GPO1, /* Turn on 1.8V */
.init_data = &gpo_init,
}, {
.id = MC13783_REG_GPO3, /* Turn on 3.3V */
.init_data = &gpo_init,
}, {
.id = MC13783_REG_VMMC2, /* Power MMC/SD, WiFi/Bluetooth. */
.init_data = &vmmc2_init,
}, {
.id = MC13783_REG_VMMC1, /* Power LCD, CMOS, FM, GPS, Accel. */
.init_data = &vmmc1_init,
}, {
.id = MC13783_REG_VGEN, /* Power LCD */
.init_data = &vgen_init,
},
};
/* MC13783 */
static struct mc13xxx_codec_platform_data mx31_3ds_codec = {
.dac_ssi_port = MC13783_SSI1_PORT,
.adc_ssi_port = MC13783_SSI1_PORT,
};
static struct mc13xxx_platform_data mc13783_pdata = {
.regulators = {
.regulators = mx31_3ds_regulators,
.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
},
.codec = &mx31_3ds_codec,
.flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC | MC13XXX_USE_CODEC,
};
static struct imx_ssi_platform_data mx31_3ds_ssi_pdata = {
.flags = IMX_SSI_DMA | IMX_SSI_NET,
};
static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
{
.modalias = "mc13783",
.max_speed_hz = 1000000,
.bus_num = 1,
.chip_select = 2, /* SS2 */
.platform_data = &mc13783_pdata,
/* irq number is run-time assigned */
.mode = SPI_CS_HIGH,
}, {
.modalias = "l4f00242t03",
.max_speed_hz = 5000000,
.bus_num = 0,
.chip_select = 2, /* SS2 */
},
};
/*
* NAND Flash
*/
static const struct mxc_nand_platform_data
mx31_3ds_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
#ifdef CONFIG_MACH_MX31_3DS_MXC_NAND_USE_BBT
.flash_bbt = 1,
#endif
};
/*
* USB OTG
*/
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
#define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR)
#define USBH2_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_BYP)
static int mx31_3ds_usbotg_init(void)
{
int err;
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
err = gpio_request(USBOTG_RST_B, "otgusb-reset");
if (err) {
pr_err("Failed to request the USB OTG reset gpio\n");
return err;
}
err = gpio_direction_output(USBOTG_RST_B, 0);
if (err) {
pr_err("Failed to drive the USB OTG reset gpio\n");
goto usbotg_free_reset;
}
mdelay(1);
gpio_set_value(USBOTG_RST_B, 1);
return 0;
usbotg_free_reset:
gpio_free(USBOTG_RST_B);
return err;
}
static int mx31_3ds_otg_init(struct platform_device *pdev)
{
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
static int mx31_3ds_host2_init(struct platform_device *pdev)
{
int err;
mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_PC_VS2, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_PC_BVD1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_PC_BVD2, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_PC_RST, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_IOIS16, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_PC_RW_B, USB_PAD_CFG);
err = gpio_request(USBH2_RST_B, "usbh2-reset");
if (err) {
pr_err("Failed to request the USB Host 2 reset gpio\n");
return err;
}
err = gpio_direction_output(USBH2_RST_B, 0);
if (err) {
pr_err("Failed to drive the USB Host 2 reset gpio\n");
goto usbotg_free_reset;
}
mdelay(1);
gpio_set_value(USBH2_RST_B, 1);
mdelay(10);
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
usbotg_free_reset:
gpio_free(USBH2_RST_B);
return err;
}
static struct mxc_usbh_platform_data otg_pdata __initdata = {
.init = mx31_3ds_otg_init,
.portsc = MXC_EHCI_MODE_ULPI,
};
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = mx31_3ds_host2_init,
.portsc = MXC_EHCI_MODE_ULPI,
};
static const struct fsl_usb2_platform_data usbotg_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
};
static bool otg_mode_host __initdata;
static int __init mx31_3ds_otg_mode(char *options)
{
if (!strcmp(options, "host"))
otg_mode_host = true;
else if (!strcmp(options, "device"))
otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
return 1;
}
__setup("otg_mode=", mx31_3ds_otg_mode);
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static const struct imxi2c_platform_data mx31_3ds_i2c0_data __initconst = {
.bitrate = 100000,
};
static void __init mx31_3ds_init(void)
{
imx31_soc_init();
/* Configure SPI1 IOMUX */
mxc_iomux_set_gpr(MUX_PGP_CSPI_BB, true);
mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
"mx31_3ds");
imx31_add_imx_uart0(&uart_pdata);
imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
imx31_add_spi_imx1(NULL);
imx31_add_imx_keypad(&mx31_3ds_keymap_data);
imx31_add_imx2_wdt();
imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
imx31_add_spi_imx0(NULL);
imx31_add_ipu_core();
imx31_add_mx3_sdc_fb(&mx3fb_pdata);
imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata);
imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
}
static void __init mx31_3ds_late(void)
{
gpiod_add_lookup_table(&mx31_3ds_lcd_gpiod_table);
mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(mx31_3ds_spi_devs,
ARRAY_SIZE(mx31_3ds_spi_devs));
mx31_3ds_usbotg_init();
if (otg_mode_host) {
otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (otg_pdata.otg)
imx31_add_mxc_ehci_otg(&otg_pdata);
}
usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (usbh2_pdata.otg)
imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
if (!otg_mode_host)
imx31_add_fsl_usb2_udc(&usbotg_pdata);
if (mxc_expio_init(MX31_CS5_BASE_ADDR, IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)))
printk(KERN_WARNING "Init of the debug board failed, all "
"devices on the debug board are unusable.\n");
imx31_add_mxc_mmc(0, &sdhc1_pdata);
}
static void __init mx31_3ds_timer_init(void)
{
mx31_clocks_init(26000000);
}
MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */
.atag_offset = 0x100,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.init_time = mx31_3ds_timer_init,
.init_machine = mx31_3ds_init,
.init_late = mx31_3ds_late,
.restart = mxc_restart,
MACHINE_END
arch/arm/mach-imx/mach-mx31ads.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright (C) 2002 Shane Nay (shane@minirl.com)
* Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/serial_8250.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
#include <linux/mfd/wm8350/audio.h>
#include <linux/mfd/wm8350/core.h>
#include <linux/mfd/wm8350/pmic.h>
#endif
#include "common.h"
#include "devices-imx31.h"
#include "hardware.h"
#include "iomux-mx3.h"
/* Base address of PBC controller */
#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT
/* PBC Board interrupt status register */
#define PBC_INTSTATUS 0x000016
/* PBC Board interrupt current status register */
#define PBC_INTCURR_STATUS 0x000018
/* PBC Interrupt mask register set address */
#define PBC_INTMASK_SET 0x00001A
/* PBC Interrupt mask register clear address */
#define PBC_INTMASK_CLEAR 0x00001C
/* External UART A */
#define PBC_SC16C652_UARTA 0x010000
/* External UART B */
#define PBC_SC16C652_UARTB 0x010010
#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS)
#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS)
#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
#define EXPIO_INT_XUART_INTA 10
#define EXPIO_INT_XUART_INTB 11
#define MXC_MAX_EXP_IO_LINES 16
/* CS8900 */
#define EXPIO_INT_ENET_INT 8
#define CS4_CS8900_MMIO_START 0x20000
static struct irq_domain *domain;
/*
* The serial port definition structure.
*/
static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
.mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
.uartclk = 14745600,
.regshift = 0,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
}, {
.membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
.mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
.uartclk = 14745600,
.regshift = 0,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
},
{},
};
static struct platform_device serial_device = {
.name = "serial8250",
.id = 0,
.dev = {
.platform_data = serial_platform_data,
},
};
static struct resource mx31ads_cs8900_resources[] __initdata = {
DEFINE_RES_MEM(MX31_CS4_BASE_ADDR + CS4_CS8900_MMIO_START, SZ_64K),
DEFINE_RES_IRQ(-1),
};
static const struct platform_device_info mx31ads_cs8900_devinfo __initconst = {
.name = "cs89x0",
.id = 0,
.res = mx31ads_cs8900_resources,
.num_res = ARRAY_SIZE(mx31ads_cs8900_resources),
};
static int __init mxc_init_extuart(void)
{
serial_platform_data[0].irq = irq_find_mapping(domain,
EXPIO_INT_XUART_INTA);
serial_platform_data[1].irq = irq_find_mapping(domain,
EXPIO_INT_XUART_INTB);
return platform_device_register(&serial_device);
}
static void __init mxc_init_ext_ethernet(void)
{
mx31ads_cs8900_resources[1].start =
irq_find_mapping(domain, EXPIO_INT_ENET_INT);
mx31ads_cs8900_resources[1].end =
irq_find_mapping(domain, EXPIO_INT_ENET_INT);
platform_device_register_full(
(struct platform_device_info *)&mx31ads_cs8900_devinfo);
}
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static unsigned int uart_pins[] = {
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1
};
static inline void mxc_init_imx_uart(void)
{
mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
imx31_add_imx_uart0(&uart_pdata);
}
static void mx31ads_expio_irq_handler(struct irq_desc *desc)
{
u32 imr_val;
u32 int_valid;
u32 expio_irq;
imr_val = imx_readw(PBC_INTMASK_SET_REG);
int_valid = imx_readw(PBC_INTSTATUS_REG) & imr_val;
expio_irq = 0;
for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
if ((int_valid & 1) == 0)
continue;
generic_handle_irq(irq_find_mapping(domain, expio_irq));
}
}
/*
* Disable an expio pin's interrupt by setting the bit in the imr.
* @param d an expio virtual irq description
*/
static void expio_mask_irq(struct irq_data *d)
{
u32 expio = d->hwirq;
/* mask the interrupt */
imx_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
imx_readw(PBC_INTMASK_CLEAR_REG);
}
/*
* Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
* @param d an expio virtual irq description
*/
static void expio_ack_irq(struct irq_data *d)
{
u32 expio = d->hwirq;
/* clear the interrupt status */
imx_writew(1 << expio, PBC_INTSTATUS_REG);
}
/*
* Enable a expio pin's interrupt by clearing the bit in the imr.
* @param d an expio virtual irq description
*/
static void expio_unmask_irq(struct irq_data *d)
{
u32 expio = d->hwirq;
/* unmask the interrupt */
imx_writew(1 << expio, PBC_INTMASK_SET_REG);
}
static struct irq_chip expio_irq_chip = {
.name = "EXPIO(CPLD)",
.irq_ack = expio_ack_irq,
.irq_mask = expio_mask_irq,
.irq_unmask = expio_unmask_irq,
};
static void __init mx31ads_init_expio(void)
{
int irq_base;
int i, irq;
printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n");
/*
* Configure INT line as GPIO input
*/
mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
/* disable the interrupt and clear the status */
imx_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
imx_writew(0xFFFF, PBC_INTSTATUS_REG);
irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id());
WARN_ON(irq_base < 0);
domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0,
&irq_domain_simple_ops, NULL);
WARN_ON(!domain);
for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) {
irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq);
irq_clear_status_flags(i, IRQ_NOREQUEST);
}
irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_4));
irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
irq_set_chained_handler(irq, mx31ads_expio_irq_handler);
}
#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
/* This section defines setup for the Wolfson Microelectronics
* 1133-EV1 PMU/audio board. When other PMU boards are supported the
* regulator definitions may be shared with them, but for now they can
* only be used with this board so would generate warnings about
* unused statics and some of the configuration is specific to this
* module.
*/
/* CPU */
static struct regulator_consumer_supply sw1a_consumers[] = {
{
.supply = "cpu_vcc",
}
};
static struct regulator_init_data sw1a_data = {
.constraints = {
.name = "SW1A",
.min_uV = 1275000,
.max_uV = 1600000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_MODE,
.valid_modes_mask = REGULATOR_MODE_NORMAL |
REGULATOR_MODE_FAST,
.state_mem = {
.uV = 1400000,
.mode = REGULATOR_MODE_NORMAL,
.enabled = 1,
},
.initial_state = PM_SUSPEND_MEM,
.always_on = 1,
.boot_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(sw1a_consumers),
.consumer_supplies = sw1a_consumers,
};
/* System IO - High */
static struct regulator_init_data viohi_data = {
.constraints = {
.name = "VIOHO",
.min_uV = 2800000,
.max_uV = 2800000,
.state_mem = {
.uV = 2800000,
.mode = REGULATOR_MODE_NORMAL,
.enabled = 1,
},
.initial_state = PM_SUSPEND_MEM,
.always_on = 1,
.boot_on = 1,
},
};
/* System IO - Low */
static struct regulator_init_data violo_data = {
.constraints = {
.name = "VIOLO",
.min_uV = 1800000,
.max_uV = 1800000,
.state_mem = {
.uV = 1800000,
.mode = REGULATOR_MODE_NORMAL,
.enabled = 1,
},
.initial_state = PM_SUSPEND_MEM,
.always_on = 1,
.boot_on = 1,
},
};
/* DDR RAM */
static struct regulator_init_data sw2a_data = {
.constraints = {
.name = "SW2A",
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.state_mem = {
.uV = 1800000,
.mode = REGULATOR_MODE_NORMAL,
.enabled = 1,
},
.state_disk = {
.mode = REGULATOR_MODE_NORMAL,
.enabled = 0,
},
.always_on = 1,
.boot_on = 1,
.initial_state = PM_SUSPEND_MEM,
},
};
static struct regulator_init_data ldo1_data = {
.constraints = {
.name = "VCAM/VMMC1/VMMC2",
.min_uV = 2800000,
.max_uV = 2800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
},
};
static struct regulator_consumer_supply ldo2_consumers[] = {
{ .supply = "AVDD", .dev_name = "1-001a" },
{ .supply = "HPVDD", .dev_name = "1-001a" },
};
/* CODEC and SIM */
static struct regulator_init_data ldo2_data = {
.constraints = {
.name = "VESIM/VSIM/AVDD",
.min_uV = 3300000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
},
.num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
.consumer_supplies = ldo2_consumers,
};
/* General */
static struct regulator_init_data vdig_data = {
.constraints = {
.name = "VDIG",
.min_uV = 1500000,
.max_uV = 1500000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.apply_uV = 1,
.always_on = 1,
.boot_on = 1,
},
};
/* Tranceivers */
static struct regulator_init_data ldo4_data = {
.constraints = {
.name = "VRF1/CVDD_2.775",
.min_uV = 2500000,
.max_uV = 2500000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.apply_uV = 1,
.always_on = 1,
.boot_on = 1,
},
};
static struct wm8350_led_platform_data wm8350_led_data = {
.name = "wm8350:white",
.default_trigger = "heartbeat",
.max_uA = 27899,
};
static struct wm8350_audio_platform_data imx32ads_wm8350_setup = {
.vmid_discharge_msecs = 1000,
.drain_msecs = 30,
.cap_discharge_msecs = 700,
.vmid_charge_msecs = 700,
.vmid_s_curve = WM8350_S_CURVE_SLOW,
.dis_out4 = WM8350_DISCHARGE_SLOW,
.dis_out3 = WM8350_DISCHARGE_SLOW,
.dis_out2 = WM8350_DISCHARGE_SLOW,
.dis_out1 = WM8350_DISCHARGE_SLOW,
.vroi_out4 = WM8350_TIE_OFF_500R,
.vroi_out3 = WM8350_TIE_OFF_500R,
.vroi_out2 = WM8350_TIE_OFF_500R,
.vroi_out1 = WM8350_TIE_OFF_500R,
.vroi_enable = 0,
.codec_current_on = WM8350_CODEC_ISEL_1_0,
.codec_current_standby = WM8350_CODEC_ISEL_0_5,
.codec_current_charge = WM8350_CODEC_ISEL_1_5,
};
static int mx31_wm8350_init(struct wm8350 *wm8350)
{
wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
WM8350_GPIO_DEBOUNCE_ON);
wm8350_gpio_config(wm8350, 3, WM8350_GPIO_DIR_IN,
WM8350_GPIO3_PWR_OFF_IN, WM8350_GPIO_ACTIVE_HIGH,
WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
WM8350_GPIO_DEBOUNCE_ON);
wm8350_gpio_config(wm8350, 4, WM8350_GPIO_DIR_IN,
WM8350_GPIO4_MR_IN, WM8350_GPIO_ACTIVE_HIGH,
WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
WM8350_GPIO_DEBOUNCE_OFF);
wm8350_gpio_config(wm8350, 7, WM8350_GPIO_DIR_IN,
WM8350_GPIO7_HIBERNATE_IN, WM8350_GPIO_ACTIVE_HIGH,
WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
WM8350_GPIO_DEBOUNCE_OFF);
wm8350_gpio_config(wm8350, 6, WM8350_GPIO_DIR_OUT,
WM8350_GPIO6_SDOUT_OUT, WM8350_GPIO_ACTIVE_HIGH,
WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
WM8350_GPIO_DEBOUNCE_OFF);
wm8350_gpio_config(wm8350, 8, WM8350_GPIO_DIR_OUT,
WM8350_GPIO8_VCC_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
WM8350_GPIO_DEBOUNCE_OFF);
wm8350_gpio_config(wm8350, 9, WM8350_GPIO_DIR_OUT,
WM8350_GPIO9_BATT_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
WM8350_GPIO_DEBOUNCE_OFF);
wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
wm8350_register_regulator(wm8350, WM8350_DCDC_6, &sw2a_data);
wm8350_register_regulator(wm8350, WM8350_LDO_1, &ldo1_data);
wm8350_register_regulator(wm8350, WM8350_LDO_2, &ldo2_data);
wm8350_register_regulator(wm8350, WM8350_LDO_3, &vdig_data);
wm8350_register_regulator(wm8350, WM8350_LDO_4, &ldo4_data);
/* LEDs */
wm8350_dcdc_set_slot(wm8350, WM8350_DCDC_5, 1, 1,
WM8350_DC5_ERRACT_SHUTDOWN_CONV);
wm8350_isink_set_flash(wm8350, WM8350_ISINK_A,
WM8350_ISINK_FLASH_DISABLE,
WM8350_ISINK_FLASH_TRIG_BIT,
WM8350_ISINK_FLASH_DUR_32MS,
WM8350_ISINK_FLASH_ON_INSTANT,
WM8350_ISINK_FLASH_OFF_INSTANT,
WM8350_ISINK_FLASH_MODE_EN);
wm8350_dcdc25_set_mode(wm8350, WM8350_DCDC_5,
WM8350_ISINK_MODE_BOOST,
WM8350_ISINK_ILIM_NORMAL,
WM8350_DC5_RMP_20V,
WM8350_DC5_FBSRC_ISINKA);
wm8350_register_led(wm8350, 0, WM8350_DCDC_5, WM8350_ISINK_A,
&wm8350_led_data);
wm8350->codec.platform_data = &imx32ads_wm8350_setup;
regulator_has_full_constraints();
return 0;
}
static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
.init = mx31_wm8350_init,
};
#endif
static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
{
I2C_BOARD_INFO("wm8350", 0x1a),
.platform_data = &mx31_wm8350_pdata,
/* irq number is run-time assigned */
},
#endif
};
static void __init mxc_init_i2c(void)
{
#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
mx31ads_i2c1_devices[0].irq =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
#endif
i2c_register_board_info(1, mx31ads_i2c1_devices,
ARRAY_SIZE(mx31ads_i2c1_devices));
mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1));
mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1));
imx31_add_imx_i2c1(NULL);
}
static unsigned int ssi_pins[] = {
MX31_PIN_SFS5__SFS5,
MX31_PIN_SCK5__SCK5,
MX31_PIN_SRXD5__SRXD5,
MX31_PIN_STXD5__STXD5,
};
static void __init mxc_init_audio(void)
{
imx31_add_imx_ssi(0, NULL);
mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
}
/*
* Static mappings, starting from the CS4 start address up to the start address
* of the CS8900.
*/
static struct map_desc mx31ads_io_desc[] __initdata = {
{
.virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
.length = CS4_CS8900_MMIO_START,
.type = MT_DEVICE
},
};
static void __init mx31ads_map_io(void)
{
mx31_map_io();
iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
}
static void __init mx31ads_init(void)
{
imx31_soc_init();
mxc_init_imx_uart();
mxc_init_audio();
}
static void __init mx31ads_late(void)
{
mx31ads_init_expio();
mxc_init_extuart();
mxc_init_i2c();
mxc_init_ext_ethernet();
}
static void __init mx31ads_timer_init(void)
{
mx31_clocks_init(26000000);
}
MACHINE_START(MX31ADS, "Freescale MX31ADS")
/* Maintainer: Freescale Semiconductor, Inc. */
.atag_offset = 0x100,
.map_io = mx31ads_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.init_time = mx31ads_timer_init,
.init_machine = mx31ads_init,
.init_late = mx31ads_late,
.restart = mxc_restart,
MACHINE_END
arch/arm/mach-imx/mach-mx31lilly.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* LILLY-1131 module support
*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
*
* based on code for other MX31 boards,
*
* Copyright 2005-2007 Freescale Semiconductor
* Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
* Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/moduleparam.h>
#include <linux/smsc911x.h>
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/mfd/mc13783.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include "board-mx31lilly.h"
#include "common.h"
#include "devices-imx31.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
/*
* This file contains module-specific initialization routines for LILLY-1131.
* Initialization of peripherals found on the baseboard is implemented in the
* appropriate baseboard support code.
*/
static unsigned int mx31lilly_pins[] __initdata = {
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
MX31_PIN_CTS2__CTS2,
MX31_PIN_RTS2__RTS2,
MX31_PIN_TXD2__TXD2,
MX31_PIN_RXD2__RXD2,
MX31_PIN_CSPI3_MOSI__RXD3,
MX31_PIN_CSPI3_MISO__TXD3,
MX31_PIN_CSPI3_SCLK__RTS3,
MX31_PIN_CSPI3_SPI_RDY__CTS3,
};
/* UART */
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
/* SMSC ethernet support */
static struct resource smsc91x_resources[] = {
{
.start = MX31_CS4_BASE_ADDR,
.end = MX31_CS4_BASE_ADDR + 0xffff,
.flags = IORESOURCE_MEM,
},
{
/* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
}
};
static struct smsc911x_platform_config smsc911x_config = {
.phy_interface = PHY_INTERFACE_MODE_MII,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
.flags = SMSC911X_USE_32BIT |
SMSC911X_SAVE_MAC_ADDRESS |
SMSC911X_FORCE_INTERNAL_PHY,
};
static struct platform_device smsc91x_device = {
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(smsc91x_resources),
.resource = smsc91x_resources,
.dev = {
.platform_data = &smsc911x_config,
}
};
/* NOR flash */
static struct physmap_flash_data nor_flash_data = {
.width = 2,
};
static struct resource nor_flash_resource = {
.start = 0xa0000000,
.end = 0xa1ffffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device physmap_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &nor_flash_data,
},
.resource = &nor_flash_resource,
.num_resources = 1,
};
/* USB */
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
static int usbh1_init(struct platform_device *pdev)
{
int pins[] = {
MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
MX31_PIN_CSPI1_MISO__USBH1_RXDP,
MX31_PIN_CSPI1_SS0__USBH1_TXDM,
MX31_PIN_CSPI1_SS1__USBH1_TXDP,
MX31_PIN_CSPI1_SS2__USBH1_RCV,
MX31_PIN_CSPI1_SCLK__USBH1_OEB,
MX31_PIN_CSPI1_SPI_RDY__USBH1_FS,
};
mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H1");
mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
mdelay(10);
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
MXC_EHCI_INTERFACE_SINGLE_UNI);
}
static int usbh2_init(struct platform_device *pdev)
{
int pins[] = {
MX31_PIN_USBH2_DATA0__USBH2_DATA0,
MX31_PIN_USBH2_DATA1__USBH2_DATA1,
MX31_PIN_USBH2_CLK__USBH2_CLK,
MX31_PIN_USBH2_DIR__USBH2_DIR,
MX31_PIN_USBH2_NXT__USBH2_NXT,
MX31_PIN_USBH2_STP__USBH2_STP,
};
mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
mxc_iomux_set_gpr(MUX_PGP_UH2, true);
/* chip select */
mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
"USBH2_CS");
gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
mdelay(10);
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
.init = usbh1_init,
.portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
};
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
};
static void __init lilly1131_usb_init(void)
{
imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (usbh2_pdata.otg)
imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
}
static struct mc13xxx_platform_data mc13783_pdata __initdata = {
.flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN,
};
static struct spi_board_info mc13783_dev __initdata = {
.modalias = "mc13783",
.max_speed_hz = 1000000,
.bus_num = 1,
.chip_select = 0,
.platform_data = &mc13783_pdata,
/* irq number is run-time assigned */
};
static struct platform_device *devices[] __initdata = {
&smsc91x_device,
&physmap_flash_device,
};
static int mx31lilly_baseboard;
core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
REGULATOR_SUPPLY("vddvario", "smsc911x"),
};
static void __init mx31lilly_board_init(void)
{
imx31_soc_init();
mxc_iomux_setup_multiple_pins(mx31lilly_pins,
ARRAY_SIZE(mx31lilly_pins), "mx31lily");
imx31_add_imx_uart0(&uart_pdata);
imx31_add_imx_uart1(&uart_pdata);
imx31_add_imx_uart2(&uart_pdata);
mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
/* SPI */
mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK");
mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX");
mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX");
mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY");
mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0");
mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1");
mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2");
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK");
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX");
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX");
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY");
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0");
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
imx31_add_spi_imx0(NULL);
imx31_add_spi_imx1(NULL);
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
}
static void __init mx31lilly_late_init(void)
{
if (mx31lilly_baseboard == MX31LILLY_DB)
mx31lilly_db_init();
mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(&mc13783_dev, 1);
smsc91x_resources[1].start =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
smsc91x_resources[1].end =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
platform_add_devices(devices, ARRAY_SIZE(devices));
/* USB */
lilly1131_usb_init();
}
static void __init mx31lilly_timer_init(void)
{
mx31_clocks_init(26000000);
}
MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
.atag_offset = 0x100,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.init_time = mx31lilly_timer_init,
.init_machine = mx31lilly_board_init,
.init_late = mx31lilly_late_init,
.restart = mxc_restart,
MACHINE_END
arch/arm/mach-imx/mach-mx31lite.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright (C) 2002 Shane Nay (shane@minirl.com)
* Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/memory.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/moduleparam.h>
#include <linux/smsc911x.h>
#include <linux/mfd/mc13783.h>
#include <linux/spi/spi.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/mtd/physmap.h>
#include <linux/delay.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <asm/page.h>
#include <asm/setup.h>
#include "board-mx31lite.h"
#include "common.h"
#include "devices-imx31.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
/*
* This file contains the module-specific initialization routines.
*/
static unsigned int mx31lite_pins[] = {
/* UART1 */
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
/* SPI 0 */
MX31_PIN_CSPI1_SCLK__SCLK,
MX31_PIN_CSPI1_MOSI__MOSI,
MX31_PIN_CSPI1_MISO__MISO,
MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
MX31_PIN_CSPI1_SS0__SS0,
MX31_PIN_CSPI1_SS1__SS1,
MX31_PIN_CSPI1_SS2__SS2,
/* LAN9117 IRQ pin */
IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
/* SPI 1 */
MX31_PIN_CSPI2_SCLK__SCLK,
MX31_PIN_CSPI2_MOSI__MOSI,
MX31_PIN_CSPI2_MISO__MISO,
MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
MX31_PIN_CSPI2_SS0__SS0,
MX31_PIN_CSPI2_SS1__SS1,
MX31_PIN_CSPI2_SS2__SS2,
};
/* UART */
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static const struct mxc_nand_platform_data
mx31lite_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
};
static struct smsc911x_platform_config smsc911x_config = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.flags = SMSC911X_USE_16BIT,
};
static struct resource smsc911x_resources[] = {
{
.start = MX31_CS4_BASE_ADDR,
.end = MX31_CS4_BASE_ADDR + 0x100,
.flags = IORESOURCE_MEM,
}, {
/* irq number is run-time assigned */
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device smsc911x_device = {
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(smsc911x_resources),
.resource = smsc911x_resources,
.dev = {
.platform_data = &smsc911x_config,
},
};
static struct mc13xxx_platform_data mc13783_pdata __initdata = {
.flags = MC13XXX_USE_RTC,
};
static struct spi_board_info mc13783_spi_dev __initdata = {
.modalias = "mc13783",
.max_speed_hz = 1000000,
.bus_num = 1,
.chip_select = 0,
.platform_data = &mc13783_pdata,
/* irq number is run-time assigned */
};
/*
* USB
*/
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
static int usbh2_init(struct platform_device *pdev)
{
int pins[] = {
MX31_PIN_USBH2_DATA0__USBH2_DATA0,
MX31_PIN_USBH2_DATA1__USBH2_DATA1,
MX31_PIN_USBH2_CLK__USBH2_CLK,
MX31_PIN_USBH2_DIR__USBH2_DIR,
MX31_PIN_USBH2_NXT__USBH2_NXT,
MX31_PIN_USBH2_STP__USBH2_STP,
};
mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
mxc_iomux_set_gpr(MUX_PGP_UH2, true);
/* chip select */
mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
"USBH2_CS");
gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
mdelay(10);
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
};
/*
* NOR flash
*/
static struct physmap_flash_data nor_flash_data = {
.width = 2,
};
static struct resource nor_flash_resource = {
.start = 0xa0000000,
.end = 0xa1ffffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device physmap_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &nor_flash_data,
},
.resource = &nor_flash_resource,
.num_resources = 1,
};
/*
* This structure defines the MX31 memory map.
*/
static struct map_desc mx31lite_io_desc[] __initdata = {
{
.virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
.length = MX31_CS4_SIZE,
.type = MT_DEVICE
}
};
/*
* Set up static virtual mappings.
*/
static void __init mx31lite_map_io(void)
{
mx31_map_io();
iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
}
static int mx31lite_baseboard;
core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
REGULATOR_SUPPLY("vddvario", "smsc911x"),
};
static void __init mx31lite_init(void)
{
imx31_soc_init();
mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
"mx31lite");
imx31_add_imx_uart0(&uart_pdata);
imx31_add_spi_imx0(NULL);
/* NOR and NAND flash */
platform_device_register(&physmap_flash_device);
imx31_add_mxc_nand(&mx31lite_nand_board_info);
imx31_add_spi_imx1(NULL);
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
}
static void __init mx31lite_late(void)
{
int ret;
if (mx31lite_baseboard == MX31LITE_DB)
mx31lite_db_init();
mc13783_spi_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(&mc13783_spi_dev, 1);
/* USB */
usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (usbh2_pdata.otg)
imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
/* SMSC9117 IRQ pin */
ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
if (ret)
pr_warn("could not get LAN irq gpio\n");
else {
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
smsc911x_resources[1].start =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6));
smsc911x_resources[1].end =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6));
platform_device_register(&smsc911x_device);
}
}
static void __init mx31lite_timer_init(void)
{
mx31_clocks_init(26000000);
}
MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
/* Maintainer: Freescale Semiconductor, Inc. */
.atag_offset = 0x100,
.map_io = mx31lite_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.init_time = mx31lite_timer_init,
.init_machine = mx31lite_init,
.init_late = mx31lite_late,
.restart = mxc_restart,
MACHINE_END
arch/arm/mach-imx/mach-mx31moboard.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2008 Valentin Longchamp, EPFL Mobots group
*/
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/gfp.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/moduleparam.h>
#include <linux/leds.h>
#include <linux/memory.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/mc13783.h>
#include <linux/spi/spi.h>
#include <linux/types.h>
#include <linux/memblock.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/input.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <asm/memblock.h>
#include <linux/platform_data/asoc-imx-ssi.h>
#include "board-mx31moboard.h"
#include "common.h"
#include "devices-imx31.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
static unsigned int moboard_pins[] = {
/* UART0 */
MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
MX31_PIN_CTS1__GPIO2_7,
/* UART4 */
MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
/* I2C0 */
MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL,
/* I2C1 */
MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL,
/* SDHC1 */
MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2,
MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
/* USB reset */
MX31_PIN_GPIO1_0__GPIO1_0,
/* USB OTG */
MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
MX31_PIN_USB_OC__GPIO1_30,
/* USB H2 */
MX31_PIN_USBH2_DATA0__USBH2_DATA0,
MX31_PIN_USBH2_DATA1__USBH2_DATA1,
MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3,
MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5,
MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7,
MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR,
MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP,
MX31_PIN_SCK6__GPIO1_25,
/* LEDs */
MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
/* SPI1 */
MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2,
/* Atlas IRQ */
MX31_PIN_GPIO1_3__GPIO1_3,
/* SPI2 */
MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO,
MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY,
MX31_PIN_CSPI2_SS1__CSPI3_SS1,
/* SSI */
MX31_PIN_STXD4__STXD4, MX31_PIN_SRXD4__SRXD4,
MX31_PIN_SCK4__SCK4, MX31_PIN_SFS4__SFS4,
};
static struct physmap_flash_data mx31moboard_flash_data = {
.width = 2,
};
static struct resource mx31moboard_flash_resource = {
.start = 0xa0000000,
.end = 0xa1ffffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device mx31moboard_flash = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &mx31moboard_flash_data,
},
.resource = &mx31moboard_flash_resource,
.num_resources = 1,
};
static void __init moboard_uart0_init(void)
{
if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack")) {
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
}
}
static const struct imxuart_platform_data uart0_pdata __initconst = {
};
static const struct imxuart_platform_data uart4_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static const struct imxi2c_platform_data moboard_i2c0_data __initconst = {
.bitrate = 400000,
};
static const struct imxi2c_platform_data moboard_i2c1_data __initconst = {
.bitrate = 100000,
};
static struct regulator_consumer_supply sdhc_consumers[] = {
{
.dev_name = "imx31-mmc.0",
.supply = "sdhc0_vcc",
},
{
.dev_name = "imx31-mmc.1",
.supply = "sdhc1_vcc",
},
};
static struct regulator_init_data sdhc_vreg_data = {
.constraints = {
.min_uV = 2700000,
.max_uV = 3000000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
.valid_modes_mask = REGULATOR_MODE_NORMAL |
REGULATOR_MODE_FAST,
.always_on = 0,
.boot_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(sdhc_consumers),
.consumer_supplies = sdhc_consumers,
};
static struct regulator_consumer_supply cam_consumers[] = {
{
.dev_name = "mx3_camera.0",
.supply = "cam_vcc",
},
};
static struct regulator_init_data cam_vreg_data = {
.constraints = {
.min_uV = 2700000,
.max_uV = 3000000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
.valid_modes_mask = REGULATOR_MODE_NORMAL |
REGULATOR_MODE_FAST,
.always_on = 0,
.boot_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
.consumer_supplies = cam_consumers,
};
static struct mc13xxx_regulator_init_data moboard_regulators[] = {
{
.id = MC13783_REG_VMMC1,
.init_data = &sdhc_vreg_data,
},
{
.id = MC13783_REG_VCAM,
.init_data = &cam_vreg_data,
},
};
static struct mc13xxx_led_platform_data moboard_led[] = {
{
.id = MC13783_LED_R1,
.name = "coreboard-led-4:red",
},
{
.id = MC13783_LED_G1,
.name = "coreboard-led-4:green",
},
{
.id = MC13783_LED_B1,
.name = "coreboard-led-4:blue",
},
{
.id = MC13783_LED_R2,
.name = "coreboard-led-5:red",
},
{
.id = MC13783_LED_G2,
.name = "coreboard-led-5:green",
},
{
.id = MC13783_LED_B2,
.name = "coreboard-led-5:blue",
},
};
static struct mc13xxx_leds_platform_data moboard_leds = {
.num_leds = ARRAY_SIZE(moboard_led),
.led = moboard_led,
.led_control[0] = MC13783_LED_C0_ENABLE | MC13783_LED_C0_ABMODE(0),
.led_control[1] = MC13783_LED_C1_SLEWLIM,
.led_control[2] = MC13783_LED_C2_SLEWLIM,
.led_control[3] = MC13783_LED_C3_PERIOD(0) |
MC13783_LED_C3_CURRENT_R1(2) |
MC13783_LED_C3_CURRENT_G1(2) |
MC13783_LED_C3_CURRENT_B1(2),
.led_control[4] = MC13783_LED_C4_PERIOD(0) |
MC13783_LED_C4_CURRENT_R2(3) |
MC13783_LED_C4_CURRENT_G2(3) |
MC13783_LED_C4_CURRENT_B2(3),
};
static struct mc13xxx_buttons_platform_data moboard_buttons = {
.b1on_flags = MC13783_BUTTON_DBNC_750MS | MC13783_BUTTON_ENABLE |
MC13783_BUTTON_POL_INVERT,
.b1on_key = KEY_POWER,
};
static struct mc13xxx_codec_platform_data moboard_codec = {
.dac_ssi_port = MC13783_SSI1_PORT,
.adc_ssi_port = MC13783_SSI1_PORT,
};
static struct mc13xxx_platform_data moboard_pmic = {
.regulators = {
.regulators = moboard_regulators,
.num_regulators = ARRAY_SIZE(moboard_regulators),
},
.leds = &moboard_leds,
.buttons = &moboard_buttons,
.codec = &moboard_codec,
.flags = MC13XXX_USE_RTC | MC13XXX_USE_ADC | MC13XXX_USE_CODEC,
};
static struct imx_ssi_platform_data moboard_ssi_pdata = {
.flags = IMX_SSI_DMA | IMX_SSI_NET,
};
static struct spi_board_info moboard_spi_board_info[] __initdata = {
{
.modalias = "mc13783",
/* irq number is run-time assigned */
.max_speed_hz = 300000,
.bus_num = 1,
.chip_select = 0,
.platform_data = &moboard_pmic,
.mode = SPI_CS_HIGH,
},
};
#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
static int moboard_sdhc1_get_ro(struct device *dev)
{
return !gpio_get_value(SDHC1_WP);
}
static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
int ret;
ret = gpio_request(SDHC1_CD, "sdhc-detect");
if (ret)
return ret;
gpio_direction_input(SDHC1_CD);
ret = gpio_request(SDHC1_WP, "sdhc-wp");
if (ret)
goto err_gpio_free;
gpio_direction_input(SDHC1_WP);
ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"sdhc1-card-detect", data);
if (ret)
goto err_gpio_free_2;
return 0;
err_gpio_free_2:
gpio_free(SDHC1_WP);
err_gpio_free:
gpio_free(SDHC1_CD);
return ret;
}
static void moboard_sdhc1_exit(struct device *dev, void *data)
{
free_irq(gpio_to_irq(SDHC1_CD), data);
gpio_free(SDHC1_WP);
gpio_free(SDHC1_CD);
}
static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
.get_ro = moboard_sdhc1_get_ro,
.init = moboard_sdhc1_init,
.exit = moboard_sdhc1_exit,
};
/*
* this pin is dedicated for all mx31moboard systems, so we do it here
*/
#define USB_RESET_B IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS)
#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
static void usb_xcvr_reset(void)
{
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG | PAD_CTL_100K_PU);
mxc_iomux_set_gpr(MUX_PGP_UH2, true);
mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG | PAD_CTL_100K_PD);
gpio_request(OTG_EN_B, "usb-udc-en");
gpio_direction_output(OTG_EN_B, 0);
gpio_request(USBH2_EN_B, "usbh2-en");
gpio_direction_output(USBH2_EN_B, 0);
gpio_request(USB_RESET_B, "usb-reset");
gpio_direction_output(USB_RESET_B, 0);
mdelay(1);
gpio_set_value(USB_RESET_B, 1);
mdelay(1);
}
static int moboard_usbh2_init_hw(struct platform_device *pdev)
{
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = moboard_usbh2_init_hw,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
};
static int __init moboard_usbh2_init(void)
{
struct platform_device *pdev;
usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (!usbh2_pdata.otg)
return -ENODEV;
pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
return PTR_ERR_OR_ZERO(pdev);
}
static const struct gpio_led mx31moboard_leds[] __initconst = {
{
.name = "coreboard-led-0:red:running",
.default_trigger = "heartbeat",
.gpio = IOMUX_TO_GPIO(MX31_PIN_SVEN0),
}, {
.name = "coreboard-led-1:red",
.gpio = IOMUX_TO_GPIO(MX31_PIN_STX0),
}, {
.name = "coreboard-led-2:red",
.gpio = IOMUX_TO_GPIO(MX31_PIN_SRX0),
}, {
.name = "coreboard-led-3:red",
.gpio = IOMUX_TO_GPIO(MX31_PIN_SIMPD0),
},
};
static const struct gpio_led_platform_data mx31moboard_led_pdata __initconst = {
.num_leds = ARRAY_SIZE(mx31moboard_leds),
.leds = mx31moboard_leds,
};
static struct platform_device *devices[] __initdata = {
&mx31moboard_flash,
};
static struct mx3_camera_pdata camera_pdata __initdata = {
.flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
.mclk_10khz = 4800,
};
static phys_addr_t mx3_camera_base __initdata;
#define MX3_CAMERA_BUF_SIZE SZ_4M
static int __init mx31moboard_init_cam(void)
{
int ret;
struct platform_device *pdev;
imx31_add_ipu_core();
pdev = imx31_alloc_mx3_camera(&camera_pdata);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
ret = dma_declare_coherent_memory(&pdev->dev,
mx3_camera_base, mx3_camera_base,
MX3_CAMERA_BUF_SIZE);
if (ret)
goto err;
ret = platform_device_add(pdev);
if (ret)
err:
platform_device_put(pdev);
return ret;
}
static void mx31moboard_poweroff(void)
{
struct clk *clk = clk_get_sys("imx2-wdt.0", NULL);
if (!IS_ERR(clk))
clk_prepare_enable(clk);
mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST);
imx_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
}
static int mx31moboard_baseboard;
core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
/*
* Board specific initialization.
*/
static void __init mx31moboard_init(void)
{
imx31_soc_init();
mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
"moboard");
platform_add_devices(devices, ARRAY_SIZE(devices));
imx31_add_imx2_wdt();
imx31_add_imx_uart0(&uart0_pdata);
imx31_add_imx_uart4(&uart4_pdata);
imx31_add_imx_i2c0(&moboard_i2c0_data);
imx31_add_imx_i2c1(&moboard_i2c1_data);
imx31_add_spi_imx1(NULL);
imx31_add_spi_imx2(NULL);
mx31moboard_init_cam();
imx31_add_imx_ssi(0, &moboard_ssi_pdata);
pm_power_off = mx31moboard_poweroff;
}
static void __init mx31moboard_late(void)
{
gpio_led_register_device(-1, &mx31moboard_led_pdata);
moboard_uart0_init();
gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
moboard_spi_board_info[0].irq =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(moboard_spi_board_info,
ARRAY_SIZE(moboard_spi_board_info));
imx31_add_mxc_mmc(0, &sdhc1_pdata);
usb_xcvr_reset();
moboard_usbh2_init();
imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
switch (mx31moboard_baseboard) {
case MX31NOBOARD:
break;
case MX31DEVBOARD:
mx31moboard_devboard_init();
break;
case MX31MARXBOT:
mx31moboard_marxbot_init();
break;
case MX31SMARTBOT:
case MX31EYEBOT:
mx31moboard_smartbot_init(mx31moboard_baseboard);
break;
default:
printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
mx31moboard_baseboard);
}
}
static void __init mx31moboard_timer_init(void)
{
mx31_clocks_init(26000000);
}
static void __init mx31moboard_reserve(void)
{
/* reserve 4 MiB for mx3-camera */
mx3_camera_base = arm_memblock_steal(MX3_CAMERA_BUF_SIZE,
MX3_CAMERA_BUF_SIZE);
}
MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
/* Maintainer: Philippe Retornaz, EPFL Mobots group */
.atag_offset = 0x100,
.reserve = mx31moboard_reserve,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.init_time = mx31moboard_timer_init,
.init_machine = mx31moboard_init,
.init_late = mx31moboard_late,
.restart = mxc_restart,
MACHINE_END
arch/arm/mach-imx/mach-mx35_3ds.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
*
* Copyright (C) 2011 Meprolight, Ltd.
* Alex Gershgorin <alexg@meprolight.com>
*
* Modified from i.MX31 3-Stack Development System
*/
/*
* This machine is known as:
* - i.MX35 3-Stack Development System
* - i.MX35 Platform Development Kit (i.MX35 PDK)
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/memory.h>
#include <linux/gpio.h>
#include <linux/usb/otg.h>
#include <linux/mtd/physmap.h>
#include <linux/mfd/mc13892.h>
#include <linux/regulator/machine.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <video/platform_lcd.h>
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx35.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx35.h"
#define GPIO_MC9S08DZ60_GPS_ENABLE 0
#define GPIO_MC9S08DZ60_HDD_ENABLE 4
#define GPIO_MC9S08DZ60_WIFI_ENABLE 5
#define GPIO_MC9S08DZ60_LCD_ENABLE 6
#define GPIO_MC9S08DZ60_SPEAKER_ENABLE 8
static const struct fb_videomode fb_modedb[] = {
{
/* 800x480 @ 55 Hz */
.name = "Ceramate-CLAA070VC01",
.refresh = 55,
.xres = 800,
.yres = 480,
.pixclock = 40000,
.left_margin = 40,
.right_margin = 40,
.upper_margin = 5,
.lower_margin = 5,
.hsync_len = 20,
.vsync_len = 10,
.sync = FB_SYNC_OE_ACT_HIGH,
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
},
};
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "Ceramate-CLAA070VC01",
.mode = fb_modedb,
.num_modes = ARRAY_SIZE(fb_modedb),
};
static struct i2c_board_info __initdata i2c_devices_3ds[] = {
{
I2C_BOARD_INFO("mc9s08dz60", 0x69),
},
};
static int lcd_power_gpio = -ENXIO;
static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip, void *data)
{
return !strcmp(chip->label, data);
}
static void mx35_3ds_lcd_set_power(
struct plat_lcd_data *pd, unsigned int power)
{
struct gpio_chip *chip;
if (!gpio_is_valid(lcd_power_gpio)) {
chip = gpiochip_find(
"mc9s08dz60", mc9s08dz60_gpiochip_match);
if (chip) {
lcd_power_gpio =
chip->base + GPIO_MC9S08DZ60_LCD_ENABLE;
if (gpio_request(lcd_power_gpio, "lcd_power") < 0) {
pr_err("error: gpio already requested!\n");
lcd_power_gpio = -ENXIO;
}
} else {
pr_err("error: didn't find mc9s08dz60 gpio chip\n");
}
}
if (gpio_is_valid(lcd_power_gpio))
gpio_set_value_cansleep(lcd_power_gpio, power);
}
static struct plat_lcd_data mx35_3ds_lcd_data = {
.set_power = mx35_3ds_lcd_set_power,
};
static struct platform_device mx35_3ds_lcd = {
.name = "platform-lcd",
.dev.platform_data = &mx35_3ds_lcd_data,
};
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static struct physmap_flash_data mx35pdk_flash_data = {
.width = 2,
};
static struct resource mx35pdk_flash_resource = {
.start = MX35_CS0_BASE_ADDR,
.end = MX35_CS0_BASE_ADDR + SZ_64M - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device mx35pdk_flash = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &mx35pdk_flash_data,
},
.resource = &mx35pdk_flash_resource,
.num_resources = 1,
};
static const struct mxc_nand_platform_data mx35pdk_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
.flash_bbt = 1,
};
static struct platform_device *devices[] __initdata = {
&mx35pdk_flash,
};
static const iomux_v3_cfg_t mx35pdk_pads[] __initconst = {
/* UART1 */
MX35_PAD_CTS1__UART1_CTS,
MX35_PAD_RTS1__UART1_RTS,
MX35_PAD_TXD1__UART1_TXD_MUX,
MX35_PAD_RXD1__UART1_RXD_MUX,
/* FEC */
MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
MX35_PAD_FEC_RX_DV__FEC_RX_DV,
MX35_PAD_FEC_COL__FEC_COL,
MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
MX35_PAD_FEC_TX_EN__FEC_TX_EN,
MX35_PAD_FEC_MDC__FEC_MDC,
MX35_PAD_FEC_MDIO__FEC_MDIO,
MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
MX35_PAD_FEC_CRS__FEC_CRS,
MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
/* USBOTG */
MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
/* USBH1 */
MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
/* SDCARD */
MX35_PAD_SD1_CMD__ESDHC1_CMD,
MX35_PAD_SD1_CLK__ESDHC1_CLK,
MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
/* I2C1 */
MX35_PAD_I2C1_CLK__I2C1_SCL,
MX35_PAD_I2C1_DAT__I2C1_SDA,
/* Display */
MX35_PAD_LD0__IPU_DISPB_DAT_0,
MX35_PAD_LD1__IPU_DISPB_DAT_1,
MX35_PAD_LD2__IPU_DISPB_DAT_2,
MX35_PAD_LD3__IPU_DISPB_DAT_3,
MX35_PAD_LD4__IPU_DISPB_DAT_4,
MX35_PAD_LD5__IPU_DISPB_DAT_5,
MX35_PAD_LD6__IPU_DISPB_DAT_6,
MX35_PAD_LD7__IPU_DISPB_DAT_7,
MX35_PAD_LD8__IPU_DISPB_DAT_8,
MX35_PAD_LD9__IPU_DISPB_DAT_9,
MX35_PAD_LD10__IPU_DISPB_DAT_10,
MX35_PAD_LD11__IPU_DISPB_DAT_11,
MX35_PAD_LD12__IPU_DISPB_DAT_12,
MX35_PAD_LD13__IPU_DISPB_DAT_13,
MX35_PAD_LD14__IPU_DISPB_DAT_14,
MX35_PAD_LD15__IPU_DISPB_DAT_15,
MX35_PAD_LD16__IPU_DISPB_DAT_16,
MX35_PAD_LD17__IPU_DISPB_DAT_17,
MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
/*PMIC IRQ*/
MX35_PAD_GPIO2_0__GPIO2_0,
};
static struct regulator_consumer_supply sw1_consumers[] = {
{
.supply = "cpu_vcc",
}
};
static struct regulator_consumer_supply vcam_consumers[] = {
/* sgtl5000 */
REGULATOR_SUPPLY("VDDA", "0-000a"),
};
static struct regulator_init_data sw1_init = {
.constraints = {
.name = "SW1",
.min_uV = 600000,
.max_uV = 1375000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
.valid_modes_mask = 0,
.always_on = 1,
.boot_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(sw1_consumers),
.consumer_supplies = sw1_consumers,
};
static struct regulator_init_data sw2_init = {
.constraints = {
.name = "SW2",
.always_on = 1,
.boot_on = 1,
}
};
static struct regulator_init_data sw3_init = {
.constraints = {
.name = "SW3",
.always_on = 1,
.boot_on = 1,
}
};
static struct regulator_init_data sw4_init = {
.constraints = {
.name = "SW4",
.always_on = 1,
.boot_on = 1,
}
};
static struct regulator_init_data viohi_init = {
.constraints = {
.name = "VIOHI",
.boot_on = 1,
}
};
static struct regulator_init_data vusb_init = {
.constraints = {
.name = "VUSB",
.boot_on = 1,
}
};
static struct regulator_init_data vdig_init = {
.constraints = {
.name = "VDIG",
.boot_on = 1,
}
};
static struct regulator_init_data vpll_init = {
.constraints = {
.name = "VPLL",
.boot_on = 1,
}
};
static struct regulator_init_data vusb2_init = {
.constraints = {
.name = "VUSB2",
.boot_on = 1,
}
};
static struct regulator_init_data vvideo_init = {
.constraints = {
.name = "VVIDEO",
.boot_on = 1
}
};
static struct regulator_init_data vcam_init = {
.constraints = {
.name = "VCAM",
.min_uV = 2500000,
.max_uV = 3000000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_MODE,
.valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
.boot_on = 1
},
.num_consumer_supplies = ARRAY_SIZE(vcam_consumers),
.consumer_supplies = vcam_consumers,
};
static struct regulator_init_data vgen1_init = {
.constraints = {
.name = "VGEN1",
}
};
static struct regulator_init_data vgen2_init = {
.constraints = {
.name = "VGEN2",
.boot_on = 1,
}
};
static struct regulator_init_data vgen3_init = {
.constraints = {
.name = "VGEN3",
}
};
static struct mc13xxx_regulator_init_data mx35_3ds_regulators[] = {
{ .id = MC13892_SW1, .init_data = &sw1_init },
{ .id = MC13892_SW2, .init_data = &sw2_init },
{ .id = MC13892_SW3, .init_data = &sw3_init },
{ .id = MC13892_SW4, .init_data = &sw4_init },
{ .id = MC13892_VIOHI, .init_data = &viohi_init },
{ .id = MC13892_VPLL, .init_data = &vpll_init },
{ .id = MC13892_VDIG, .init_data = &vdig_init },
{ .id = MC13892_VUSB2, .init_data = &vusb2_init },
{ .id = MC13892_VVIDEO, .init_data = &vvideo_init },
{ .id = MC13892_VCAM, .init_data = &vcam_init },
{ .id = MC13892_VGEN1, .init_data = &vgen1_init },
{ .id = MC13892_VGEN2, .init_data = &vgen2_init },
{ .id = MC13892_VGEN3, .init_data = &vgen3_init },
{ .id = MC13892_VUSB, .init_data = &vusb_init },
};
static struct mc13xxx_platform_data mx35_3ds_mc13892_data = {
.flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN,
.regulators = {
.num_regulators = ARRAY_SIZE(mx35_3ds_regulators),
.regulators = mx35_3ds_regulators,
},
};
#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0)
static struct i2c_board_info mx35_3ds_i2c_mc13892 = {
I2C_BOARD_INFO("mc13892", 0x08),
.platform_data = &mx35_3ds_mc13892_data,
/* irq number is run-time assigned */
};
static void __init imx35_3ds_init_mc13892(void)
{
int ret = gpio_request_one(GPIO_PMIC_INT, GPIOF_DIR_IN, "pmic irq");
if (ret) {
pr_err("failed to get pmic irq: %d\n", ret);
return;
}
mx35_3ds_i2c_mc13892.irq = gpio_to_irq(GPIO_PMIC_INT);
i2c_register_board_info(0, &mx35_3ds_i2c_mc13892, 1);
}
static int mx35_3ds_otg_init(struct platform_device *pdev)
{
return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
}
/* OTG config */
static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_UTMI_WIDE,
.workaround = FLS_USB2_WORKAROUND_ENGCM09152,
/*
* ENGCM09152 also requires a hardware change.
* Please check the MX35 Chip Errata document for details.
*/
};
static struct mxc_usbh_platform_data otg_pdata __initdata = {
.init = mx35_3ds_otg_init,
.portsc = MXC_EHCI_MODE_UTMI,
};
static int mx35_3ds_usbh_init(struct platform_device *pdev)
{
return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
MXC_EHCI_INTERNAL_PHY);
}
/* USB HOST config */
static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
.init = mx35_3ds_usbh_init,
.portsc = MXC_EHCI_MODE_SERIAL,
};
static bool otg_mode_host __initdata;
static int __init mx35_3ds_otg_mode(char *options)
{
if (!strcmp(options, "host"))
otg_mode_host = true;
else if (!strcmp(options, "device"))
otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
return 1;
}
__setup("otg_mode=", mx35_3ds_otg_mode);
static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = {
.bitrate = 100000,
};
/*
* Board specific initialization.
*/
static void __init mx35_3ds_init(void)
{
imx35_soc_init();
mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
imx35_add_fec(NULL);
imx35_add_imx2_wdt();
imx35_add_mxc_rtc();
platform_add_devices(devices, ARRAY_SIZE(devices));
imx35_add_imx_uart0(&uart_pdata);
if (otg_mode_host)
imx35_add_mxc_ehci_otg(&otg_pdata);
imx35_add_mxc_ehci_hs(&usb_host_pdata);
if (!otg_mode_host)
imx35_add_fsl_usb2_udc(&usb_otg_pdata);
imx35_add_mxc_nand(&mx35pdk_nand_board_info);
imx35_add_sdhci_esdhc_imx(0, NULL);
imx35_add_imx_i2c0(&mx35_3ds_i2c0_data);
i2c_register_board_info(
0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds));
imx35_add_ipu_core();
}
static void __init mx35_3ds_late_init(void)
{
struct platform_device *imx35_fb_pdev;
if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1)))
pr_warn("Init of the debugboard failed, all "
"devices on the debugboard are unusable.\n");
imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata);
mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev;
platform_device_register(&mx35_3ds_lcd);
imx35_3ds_init_mc13892();
}
static void __init mx35pdk_timer_init(void)
{
mx35_clocks_init();
}
MACHINE_START(MX35_3DS, "Freescale MX35PDK")
/* Maintainer: Freescale Semiconductor, Inc */
.atag_offset = 0x100,
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
.init_time = mx35pdk_timer_init,
.init_machine = mx35_3ds_init,
.init_late = mx35_3ds_late_init,
.restart = mxc_restart,
MACHINE_END
arch/arm/mach-imx/mach-pca100.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
* Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
*/
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/property.h>
#include <linux/dma-mapping.h>
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/gpio/machine.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <asm/mach/time.h>
#include "common.h"
#include "devices-imx27.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx27.h"
#include "ulpi.h"
#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
#define SPI1_SS0 (GPIO_PORTD + 28)
#define SPI1_SS1 (GPIO_PORTD + 27)
#define SD2_CD (GPIO_PORTC + 29)
static const int pca100_pins[] __initconst = {
/* UART1 */
PE12_PF_UART1_TXD,
PE13_PF_UART1_RXD,
PE14_PF_UART1_CTS,
PE15_PF_UART1_RTS,
/* SDHC */
PB4_PF_SD2_D0,
PB5_PF_SD2_D1,
PB6_PF_SD2_D2,
PB7_PF_SD2_D3,
PB8_PF_SD2_CMD,
PB9_PF_SD2_CLK,
SD2_CD | GPIO_GPIO | GPIO_IN,
/* FEC */
PD0_AIN_FEC_TXD0,
PD1_AIN_FEC_TXD1,
PD2_AIN_FEC_TXD2,
PD3_AIN_FEC_TXD3,
PD4_AOUT_FEC_RX_ER,
PD5_AOUT_FEC_RXD1,
PD6_AOUT_FEC_RXD2,
PD7_AOUT_FEC_RXD3,
PD8_AF_FEC_MDIO,
PD9_AIN_FEC_MDC,
PD10_AOUT_FEC_CRS,
PD11_AOUT_FEC_TX_CLK,
PD12_AOUT_FEC_RXD0,
PD13_AOUT_FEC_RX_DV,
PD14_AOUT_FEC_RX_CLK,
PD15_AOUT_FEC_COL,
PD16_AIN_FEC_TX_ER,
PF23_AIN_FEC_TX_EN,
/* SSI1 */
PC20_PF_SSI1_FS,
PC21_PF_SSI1_RXD,
PC22_PF_SSI1_TXD,
PC23_PF_SSI1_CLK,
/* onboard I2C */
PC5_PF_I2C2_SDA,
PC6_PF_I2C2_SCL,
/* external I2C */
PD17_PF_I2C_DATA,
PD18_PF_I2C_CLK,
/* SPI1 */
PD25_PF_CSPI1_RDY,
PD29_PF_CSPI1_SCLK,
PD30_PF_CSPI1_MISO,
PD31_PF_CSPI1_MOSI,
/* OTG */
OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
PC7_PF_USBOTG_DATA5,
PC8_PF_USBOTG_DATA6,
PC9_PF_USBOTG_DATA0,
PC10_PF_USBOTG_DATA2,
PC11_PF_USBOTG_DATA1,
PC12_PF_USBOTG_DATA4,
PC13_PF_USBOTG_DATA3,
PE0_PF_USBOTG_NXT,
PE1_PF_USBOTG_STP,
PE2_PF_USBOTG_DIR,
PE24_PF_USBOTG_CLK,
PE25_PF_USBOTG_DATA7,
/* USBH2 */
USBH2_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
PA0_PF_USBH2_CLK,
PA1_PF_USBH2_DIR,
PA2_PF_USBH2_DATA7,
PA3_PF_USBH2_NXT,
PA4_PF_USBH2_STP,
PD19_AF_USBH2_DATA4,
PD20_AF_USBH2_DATA3,
PD21_AF_USBH2_DATA6,
PD22_AF_USBH2_DATA0,
PD23_AF_USBH2_DATA2,
PD24_AF_USBH2_DATA1,
PD26_AF_USBH2_DATA5,
/* display */
PA5_PF_LSCLK,
PA6_PF_LD0,
PA7_PF_LD1,
PA8_PF_LD2,
PA9_PF_LD3,
PA10_PF_LD4,
PA11_PF_LD5,
PA12_PF_LD6,
PA13_PF_LD7,
PA14_PF_LD8,
PA15_PF_LD9,
PA16_PF_LD10,
PA17_PF_LD11,
PA18_PF_LD12,
PA19_PF_LD13,
PA20_PF_LD14,
PA21_PF_LD15,
PA22_PF_LD16,
PA23_PF_LD17,
PA26_PF_PS,
PA28_PF_HSYNC,
PA29_PF_VSYNC,
PA31_PF_OE_ACD,
/* free GPIO */
GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN, /* GPIO0_IRQ */
GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN, /* GPIO1_IRQ */
GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN, /* GPIO2_IRQ */
};
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static const struct mxc_nand_platform_data
pca100_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
};
static const struct imxi2c_platform_data pca100_i2c1_data __initconst = {
.bitrate = 100000,
};
static const struct property_entry board_eeprom_properties[] = {
PROPERTY_ENTRY_U32("pagesize", 32),
{ }
};
static struct i2c_board_info pca100_i2c_devices[] = {
{
I2C_BOARD_INFO("24c32", 0x52), /* E0=0, E1=1, E2=0 */
.properties = board_eeprom_properties,
}, {
I2C_BOARD_INFO("pcf8563", 0x51),
}, {
I2C_BOARD_INFO("lm75", 0x4a),
}
};
static struct spi_eeprom at25320 = {
.name = "at25320an",
.byte_len = 4096,
.page_size = 32,
.flags = EE_ADDR2,
};
static struct spi_board_info pca100_spi_board_info[] __initdata = {
{
.modalias = "at25",
.max_speed_hz = 30000,
.bus_num = 0,
.chip_select = 1,
.platform_data = &at25320,
},
};
static struct gpiod_lookup_table pca100_spi0_gpiod_table = {
.dev_id = "imx27-cspi.0", /* Actual device name for spi0 */
.table = {
/*
* The i.MX27 has the i.MX21 GPIO controller, port D is
* bank 3 and thus named "imx21-gpio.3".
* SPI1_SS0 is GPIO_PORTD + 28
* SPI1_SS1 is GPIO_PORTD + 27
*/
GPIO_LOOKUP_IDX("imx21-gpio.3", 28, "cs", 0, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX("imx21-gpio.3", 27, "cs", 1, GPIO_ACTIVE_LOW),
{ },
},
};
static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
{
mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);
gpio_set_value(GPIO_PORTC + 20, 1);
udelay(2);
gpio_set_value(GPIO_PORTC + 20, 0);
mxc_gpio_mode(PC20_PF_SSI1_FS);
msleep(2);
}
static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
{
mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT); /* FS */
gpio_set_value(GPIO_PORTC + 20, 0);
mxc_gpio_mode(GPIO_PORTC | 22 | GPIO_GPIO | GPIO_OUT); /* TX */
gpio_set_value(GPIO_PORTC + 22, 0);
mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_OUT); /* reset */
gpio_set_value(GPIO_PORTC + 28, 0);
udelay(10);
gpio_set_value(GPIO_PORTC + 28, 1);
mxc_gpio_mode(PC20_PF_SSI1_FS);
mxc_gpio_mode(PC22_PF_SSI1_TXD);
msleep(2);
}
static const struct imx_ssi_platform_data pca100_ssi_pdata __initconst = {
.ac97_reset = pca100_ac97_cold_reset,
.ac97_warm_reset = pca100_ac97_warm_reset,
.flags = IMX_SSI_USE_AC97,
};
static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
int ret;
ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq,
IRQF_TRIGGER_FALLING, "imx-mmc-detect", data);
if (ret)
printk(KERN_ERR
"pca100: Failed to request irq for sd/mmc detection\n");
return ret;
}
static void pca100_sdhc2_exit(struct device *dev, void *data)
{
free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data);
}
static const struct imxmmc_platform_data sdhc_pdata __initconst = {
.init = pca100_sdhc2_init,
.exit = pca100_sdhc2_exit,
};
static int otg_phy_init(struct platform_device *pdev)
{
gpio_set_value(OTG_PHY_CS_GPIO, 0);
mdelay(10);
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
}
static struct mxc_usbh_platform_data otg_pdata __initdata = {
.init = otg_phy_init,
.portsc = MXC_EHCI_MODE_ULPI,
};
static int usbh2_phy_init(struct platform_device *pdev)
{
gpio_set_value(USBH2_PHY_CS_GPIO, 0);
mdelay(10);
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
}
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = usbh2_phy_init,
.portsc = MXC_EHCI_MODE_ULPI,
};
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
};
static bool otg_mode_host __initdata;
static int __init pca100_otg_mode(char *options)
{
if (!strcmp(options, "host"))
otg_mode_host = true;
else if (!strcmp(options, "device"))
otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
return 1;
}
__setup("otg_mode=", pca100_otg_mode);
/* framebuffer info */
static struct imx_fb_videomode pca100_fb_modes[] = {
{
.mode = {
.name = "EMERGING-ETV570G0DHU",
.refresh = 60,
.xres = 640,
.yres = 480,
.pixclock = 39722, /* in ps (25.175 MHz) */
.hsync_len = 30,
.left_margin = 114,
.right_margin = 16,
.vsync_len = 3,
.upper_margin = 32,
.lower_margin = 0,
},
/*
* TFT
* Pixel pol active high
* HSYNC active low
* VSYNC active low
* use HSYNC for ACD count
* line clock disable while idle
* always enable line clock even if no data
*/
.pcr = 0xf0c08080,
.bpp = 16,
},
};
static const struct imx_fb_platform_data pca100_fb_data __initconst = {
.mode = pca100_fb_modes,
.num_modes = ARRAY_SIZE(pca100_fb_modes),
.pwmr = 0x00A903FF,
.lscr1 = 0x00120300,
.dmacr = 0x00020010,
};
static void __init pca100_init(void)
{
int ret;
imx27_soc_init();
ret = mxc_gpio_setup_multiple_pins(pca100_pins,
ARRAY_SIZE(pca100_pins), "PCA100");
if (ret)
printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
imx27_add_imx_uart0(&uart_pdata);
imx27_add_mxc_nand(&pca100_nand_board_info);
/* only the i2c master 1 is used on this CPU card */
i2c_register_board_info(1, pca100_i2c_devices,
ARRAY_SIZE(pca100_i2c_devices));
imx27_add_imx_i2c(1, &pca100_i2c1_data);
mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN);
mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN);
spi_register_board_info(pca100_spi_board_info,
ARRAY_SIZE(pca100_spi_board_info));
imx27_add_spi_imx0(&pca100_spi0_gpiod_table);
imx27_add_imx_fb(&pca100_fb_data);
imx27_add_fec(NULL);
imx27_add_imx2_wdt();
imx27_add_mxc_w1();
}
static void __init pca100_late_init(void)
{
imx27_add_imx_ssi(0, &pca100_ssi_pdata);
imx27_add_mxc_mmc(1, &sdhc_pdata);
gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
gpio_direction_output(OTG_PHY_CS_GPIO, 1);
gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
if (otg_mode_host) {
otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (otg_pdata.otg)
imx27_add_mxc_ehci_otg(&otg_pdata);
} else {
gpio_set_value(OTG_PHY_CS_GPIO, 0);
imx27_add_fsl_usb2_udc(&otg_device_pdata);
}
usbh2_pdata.otg = imx_otg_ulpi_create(
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
if (usbh2_pdata.otg)
imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
}
static void __init pca100_timer_init(void)
{
mx27_clocks_init(26000000);
}
MACHINE_START(PCA100, "phyCARD-i.MX27")
.atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
.init_machine = pca100_init,
.init_late = pca100_late_init,
.init_time = pca100_timer_init,
.restart = mxc_restart,
MACHINE_END
arch/arm/mach-imx/mach-pcm037.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2008 Sascha Hauer, Pengutronix
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/plat-ram.h>
#include <linux/memory.h>
#include <linux/gpio.h>
#include <linux/smsc911x.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/property.h>
#include <linux/delay.h>
#include <linux/spi/spi.h>
#include <linux/irq.h>
#include <linux/can/platform/sja1000.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/gfp.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include "common.h"
#include "devices-imx31.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "pcm037.h"
#include "ulpi.h"
static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
static int __init pcm037_variant_setup(char *str)
{
if (!strcmp("eet", str))
pcm037_instance = PCM037_EET;
else if (strcmp("pcm970", str))
pr_warn("Unknown pcm037 baseboard variant %s\n", str);
return 1;
}
/* Supported values: "pcm970" (default) and "eet" */
__setup("pcm037_variant=", pcm037_variant_setup);
enum pcm037_board_variant pcm037_variant(void)
{
return pcm037_instance;
}
/* UART1 with RTS/CTS handshake signals */
static unsigned int pcm037_uart1_handshake_pins[] = {
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
};
/* UART1 without RTS/CTS handshake signals */
static unsigned int pcm037_uart1_pins[] = {
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
};
static unsigned int pcm037_pins[] = {
/* I2C */
MX31_PIN_CSPI2_MOSI__SCL,
MX31_PIN_CSPI2_MISO__SDA,
MX31_PIN_CSPI2_SS2__I2C3_SDA,
MX31_PIN_CSPI2_SCLK__I2C3_SCL,
/* SDHC1 */
MX31_PIN_SD1_DATA3__SD1_DATA3,
MX31_PIN_SD1_DATA2__SD1_DATA2,
MX31_PIN_SD1_DATA1__SD1_DATA1,
MX31_PIN_SD1_DATA0__SD1_DATA0,
MX31_PIN_SD1_CLK__SD1_CLK,
MX31_PIN_SD1_CMD__SD1_CMD,
IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */
IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */
/* SPI1 */
MX31_PIN_CSPI1_MOSI__MOSI,
MX31_PIN_CSPI1_MISO__MISO,
MX31_PIN_CSPI1_SCLK__SCLK,
MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
MX31_PIN_CSPI1_SS0__SS0,
MX31_PIN_CSPI1_SS1__SS1,
MX31_PIN_CSPI1_SS2__SS2,
/* UART2 */
MX31_PIN_TXD2__TXD2,
MX31_PIN_RXD2__RXD2,
MX31_PIN_CTS2__CTS2,
MX31_PIN_RTS2__RTS2,
/* UART3 */
MX31_PIN_CSPI3_MOSI__RXD3,
MX31_PIN_CSPI3_MISO__TXD3,
MX31_PIN_CSPI3_SCLK__RTS3,
MX31_PIN_CSPI3_SPI_RDY__CTS3,
/* LAN9217 irq pin */
IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
/* Onewire */
MX31_PIN_BATT_LINE__OWIRE,
/* Framebuffer */
MX31_PIN_LD0__LD0,
MX31_PIN_LD1__LD1,
MX31_PIN_LD2__LD2,
MX31_PIN_LD3__LD3,
MX31_PIN_LD4__LD4,
MX31_PIN_LD5__LD5,
MX31_PIN_LD6__LD6,
MX31_PIN_LD7__LD7,
MX31_PIN_LD8__LD8,
MX31_PIN_LD9__LD9,
MX31_PIN_LD10__LD10,
MX31_PIN_LD11__LD11,
MX31_PIN_LD12__LD12,
MX31_PIN_LD13__LD13,
MX31_PIN_LD14__LD14,
MX31_PIN_LD15__LD15,
MX31_PIN_LD16__LD16,
MX31_PIN_LD17__LD17,
MX31_PIN_VSYNC3__VSYNC3,
MX31_PIN_HSYNC__HSYNC,
MX31_PIN_FPSHIFT__FPSHIFT,
MX31_PIN_DRDY0__DRDY0,
MX31_PIN_D3_REV__D3_REV,
MX31_PIN_CONTRAST__CONTRAST,
MX31_PIN_D3_SPL__D3_SPL,
MX31_PIN_D3_CLS__D3_CLS,
MX31_PIN_LCS0__GPIO3_23,
/* GPIO */
IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
/* OTG */
MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
MX31_PIN_USBOTG_CLK__USBOTG_CLK,
MX31_PIN_USBOTG_DIR__USBOTG_DIR,
MX31_PIN_USBOTG_NXT__USBOTG_NXT,
MX31_PIN_USBOTG_STP__USBOTG_STP,
/* USB host 2 */
IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
};
static struct physmap_flash_data pcm037_flash_data = {
.width = 2,
};
static struct resource pcm037_flash_resource = {
.start = 0xa0000000,
.end = 0xa1ffffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device pcm037_flash = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &pcm037_flash_data,
},
.resource = &pcm037_flash_resource,
.num_resources = 1,
};
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static struct resource smsc911x_resources[] = {
{
.start = MX31_CS1_BASE_ADDR + 0x300,
.end = MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
}, {
/* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
static struct smsc911x_platform_config smsc911x_info = {
.flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY |
SMSC911X_SAVE_MAC_ADDRESS,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
.phy_interface = PHY_INTERFACE_MODE_MII,
};
static struct platform_device pcm037_eth = {
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(smsc911x_resources),
.resource = smsc911x_resources,
.dev = {
.platform_data = &smsc911x_info,
},
};
static struct platdata_mtd_ram pcm038_sram_data = {
.bankwidth = 2,
};
static struct resource pcm038_sram_resource = {
.start = MX31_CS4_BASE_ADDR,
.end = MX31_CS4_BASE_ADDR + 512 * 1024 - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device pcm037_sram_device = {
.name = "mtd-ram",
.id = 0,
.dev = {
.platform_data = &pcm038_sram_data,
},
.num_resources = 1,
.resource = &pcm038_sram_resource,
};
static const struct mxc_nand_platform_data
pcm037_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
};
static const struct imxi2c_platform_data pcm037_i2c1_data __initconst = {
.bitrate = 100000,
};
static const struct imxi2c_platform_data pcm037_i2c2_data __initconst = {
.bitrate = 20000,
};
static const struct property_entry board_eeprom_properties[] = {
PROPERTY_ENTRY_U32("pagesize", 32),
{ }
};
static struct i2c_board_info pcm037_i2c_devices[] = {
{
I2C_BOARD_INFO("24c32", 0x52), /* E0=0, E1=1, E2=0 */
.properties = board_eeprom_properties,
}, {
I2C_BOARD_INFO("pcf8563", 0x51),
}
};
/* Not connected by default */
#ifdef PCM970_SDHC_RW_SWITCH
static int pcm970_sdhc1_get_ro(struct device *dev)
{
return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6));
}
#endif
#define SDHC1_GPIO_WP IOMUX_TO_GPIO(MX31_PIN_SFS6)
#define SDHC1_GPIO_DET IOMUX_TO_GPIO(MX31_PIN_SCK6)
static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
int ret;
ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect");
if (ret)
return ret;
gpio_direction_input(SDHC1_GPIO_DET);
#ifdef PCM970_SDHC_RW_SWITCH
ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp");
if (ret)
goto err_gpio_free;
gpio_direction_input(SDHC1_GPIO_WP);
#endif
ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), detect_irq,
IRQF_TRIGGER_FALLING, "sdhc-detect", data);
if (ret)
goto err_gpio_free_2;
return 0;
err_gpio_free_2:
#ifdef PCM970_SDHC_RW_SWITCH
gpio_free(SDHC1_GPIO_WP);
err_gpio_free:
#endif
gpio_free(SDHC1_GPIO_DET);
return ret;
}
static void pcm970_sdhc1_exit(struct device *dev, void *data)
{
free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), data);
gpio_free(SDHC1_GPIO_DET);
gpio_free(SDHC1_GPIO_WP);
}
static const struct imxmmc_platform_data sdhc_pdata __initconst = {
#ifdef PCM970_SDHC_RW_SWITCH
.get_ro = pcm970_sdhc1_get_ro,
#endif
.init = pcm970_sdhc1_init,
.exit = pcm970_sdhc1_exit,
};
static struct platform_device *devices[] __initdata = {
&pcm037_flash,
&pcm037_sram_device,
};
static const struct fb_videomode fb_modedb[] = {
{
/* 240x320 @ 60 Hz Sharp */
.name = "Sharp-LQ035Q7DH06-QVGA",
.refresh = 60,
.xres = 240,
.yres = 320,
.pixclock = 185925,
.left_margin = 9,
.right_margin = 16,
.upper_margin = 7,
.lower_margin = 9,
.hsync_len = 1,
.vsync_len = 1,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
}, {
/* 240x320 @ 60 Hz */
.name = "TX090",
.refresh = 60,
.xres = 240,
.yres = 320,
.pixclock = 38255,
.left_margin = 144,
.right_margin = 0,
.upper_margin = 7,
.lower_margin = 40,
.hsync_len = 96,
.vsync_len = 1,
.sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
}, {
/* 240x320 @ 60 Hz */
.name = "CMEL-OLED",
.refresh = 60,
.xres = 240,
.yres = 320,
.pixclock = 185925,
.left_margin = 9,
.right_margin = 16,
.upper_margin = 7,
.lower_margin = 9,
.hsync_len = 1,
.vsync_len = 1,
.sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
},
};
static struct mx3fb_platform_data mx3fb_pdata = {
.name = "Sharp-LQ035Q7DH06-QVGA",
.mode = fb_modedb,
.num_modes = ARRAY_SIZE(fb_modedb),
};
static struct resource pcm970_sja1000_resources[] = {
{
.start = MX31_CS5_BASE_ADDR,
.end = MX31_CS5_BASE_ADDR + 0x100 - 1,
.flags = IORESOURCE_MEM,
}, {
/* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
static struct sja1000_platform_data pcm970_sja1000_platform_data = {
.osc_freq = 16000000,
.ocr = OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL,
.cdr = CDR_CBP,
};
static struct platform_device pcm970_sja1000 = {
.name = "sja1000_platform",
.dev = {
.platform_data = &pcm970_sja1000_platform_data,
},
.resource = pcm970_sja1000_resources,
.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
};
static int pcm037_otg_init(struct platform_device *pdev)
{
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
}
static struct mxc_usbh_platform_data otg_pdata __initdata = {
.init = pcm037_otg_init,
.portsc = MXC_EHCI_MODE_ULPI,
};
static int pcm037_usbh2_init(struct platform_device *pdev)
{
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
}
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = pcm037_usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI,
};
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
};
static bool otg_mode_host __initdata;
static int __init pcm037_otg_mode(char *options)
{
if (!strcmp(options, "host"))
otg_mode_host = true;
else if (!strcmp(options, "device"))
otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
return 1;
}
__setup("otg_mode=", pcm037_otg_mode);
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
REGULATOR_SUPPLY("vddvario", "smsc911x"),
};
/*
* Board specific initialization.
*/
static void __init pcm037_init(void)
{
imx31_soc_init();
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
mxc_iomux_set_gpr(MUX_PGP_UH2, 1);
mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
"pcm037");
#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS \
| PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */
mxc_iomux_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG); /* USBH2_DATA2 */
mxc_iomux_set_pad(MX31_PIN_STXD6, H2_PAD_CFG); /* USBH2_DATA3 */
mxc_iomux_set_pad(MX31_PIN_SFS3, H2_PAD_CFG); /* USBH2_DATA4 */
mxc_iomux_set_pad(MX31_PIN_SCK3, H2_PAD_CFG); /* USBH2_DATA5 */
mxc_iomux_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG); /* USBH2_DATA6 */
mxc_iomux_set_pad(MX31_PIN_STXD3, H2_PAD_CFG); /* USBH2_DATA7 */
if (pcm037_variant() == PCM037_EET)
mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
else
mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins,
ARRAY_SIZE(pcm037_uart1_handshake_pins),
"pcm037_uart1");
platform_add_devices(devices, ARRAY_SIZE(devices));
imx31_add_imx2_wdt();
imx31_add_imx_uart0(&uart_pdata);
/* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */
imx31_add_imx_uart1(&uart_pdata);
imx31_add_imx_uart2(&uart_pdata);
imx31_add_mxc_w1();
/* I2C adapters and devices */
i2c_register_board_info(1, pcm037_i2c_devices,
ARRAY_SIZE(pcm037_i2c_devices));
imx31_add_imx_i2c1(&pcm037_i2c1_data);
imx31_add_imx_i2c2(&pcm037_i2c2_data);
imx31_add_mxc_nand(&pcm037_nand_board_info);
imx31_add_ipu_core();
imx31_add_mx3_sdc_fb(&mx3fb_pdata);
if (otg_mode_host) {
otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (otg_pdata.otg)
imx31_add_mxc_ehci_otg(&otg_pdata);
}
usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (usbh2_pdata.otg)
imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
if (!otg_mode_host)
imx31_add_fsl_usb2_udc(&otg_device_pdata);
}
static void __init pcm037_timer_init(void)
{
mx31_clocks_init(26000000);
}
static void __init pcm037_init_late(void)
{
int ret;
/* LAN9217 IRQ pin */
ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
if (!ret) {
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
smsc911x_resources[1].start =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
smsc911x_resources[1].end =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
platform_device_register(&pcm037_eth);
} else {
pr_warn("could not get LAN irq gpio\n");
}
imx31_add_mxc_mmc(0, &sdhc_pdata);
pcm970_sja1000_resources[1].start =
gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
pcm970_sja1000_resources[1].end =
gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
platform_device_register(&pcm970_sja1000);
pcm037_eet_init_devices();
}
MACHINE_START(PCM037, "Phytec Phycore pcm037")
/* Maintainer: Pengutronix */
.atag_offset = 0x100,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.init_time = pcm037_timer_init,
.init_machine = pcm037_init,
.init_late = pcm037_init_late,
.restart = mxc_restart,
MACHINE_END
arch/arm/mach-imx/mach-pcm037_eet.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2009
* Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
*/
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <asm/mach-types.h>
#include "pcm037.h"
#include "common.h"
#include "devices-imx31.h"
#include "iomux-mx3.h"
static unsigned int pcm037_eet_pins[] = {
/* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
/* GPIO keys */
IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO), /* 0 */
IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), /* 1 */
IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO), /* 2 */
IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO), /* 3 */
IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO), /* 32 */
IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO), /* 33 */
IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO), /* 34 */
IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO), /* 35 */
IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO), /* 38 */
IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO), /* 39 */
IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO), /* 50 */
IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_GPIO), /* 51 */
IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_GPIO), /* 52 */
IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_GPIO), /* 53 */
/* LEDs */
IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_CONFIG_GPIO), /* 44 */
IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_GPIO), /* 45 */
IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_GPIO), /* 55 */
IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_GPIO), /* 56 */
};
/* SPI */
static struct spi_board_info pcm037_spi_dev[] = {
{
.modalias = "dac124s085",
.max_speed_hz = 400000,
.bus_num = 0,
.chip_select = 1, /* Index in pcm037_spi1_cs[] */
.mode = SPI_CPHA,
},
};
/* GPIO-keys input device */
static struct gpio_keys_button pcm037_gpio_keys[] = {
{
.type = EV_KEY,
.code = KEY_L,
.gpio = 0,
.desc = "Wheel Manual",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_A,
.gpio = 1,
.desc = "Wheel AF",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_V,
.gpio = 2,
.desc = "Wheel View",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_M,
.gpio = 3,
.desc = "Wheel Menu",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_UP,
.gpio = 32,
.desc = "Nav Pad Up",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_RIGHT,
.gpio = 33,
.desc = "Nav Pad Right",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_DOWN,
.gpio = 34,
.desc = "Nav Pad Down",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_LEFT,
.gpio = 35,
.desc = "Nav Pad Left",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_ENTER,
.gpio = 38,
.desc = "Nav Pad Ok",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_O,
.gpio = 39,
.desc = "Wheel Off",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = BTN_FORWARD,
.gpio = 50,
.desc = "Focus Forward",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = BTN_BACK,
.gpio = 51,
.desc = "Focus Backward",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = BTN_MIDDLE,
.gpio = 52,
.desc = "Release Half",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = BTN_EXTRA,
.gpio = 53,
.desc = "Release Full",
.wakeup = 0,
},
};
static const struct gpio_keys_platform_data
pcm037_gpio_keys_platform_data __initconst = {
.buttons = pcm037_gpio_keys,
.nbuttons = ARRAY_SIZE(pcm037_gpio_keys),
.rep = 0, /* No auto-repeat */
};
int __init pcm037_eet_init_devices(void)
{
if (pcm037_variant() != PCM037_EET)
return 0;
mxc_iomux_setup_multiple_pins(pcm037_eet_pins,
ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet");
/* SPI */
spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
imx31_add_spi_imx0(NULL);
imx_add_gpio_keys(&pcm037_gpio_keys_platform_data);
return 0;
}
arch/arm/mach-imx/mach-pcm043.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2009 Sascha Hauer, Pengutronix
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/plat-ram.h>
#include <linux/memory.h>
#include <linux/gpio.h>
#include <linux/gpio/machine.h>
#include <linux/smc911x.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/property.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include "common.h"
#include "devices-imx35.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx35.h"
#include "ulpi.h"
static const struct fb_videomode fb_modedb[] = {
{
/* 240x320 @ 60 Hz */
.name = "Sharp-LQ035Q7",
.refresh = 60,
.xres = 240,
.yres = 320,
.pixclock = 185925,
.left_margin = 9,
.right_margin = 16,
.upper_margin = 7,
.lower_margin = 9,
.hsync_len = 1,
.vsync_len = 1,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
}, {
/* 240x320 @ 60 Hz */
.name = "TX090",
.refresh = 60,
.xres = 240,
.yres = 320,
.pixclock = 38255,
.left_margin = 144,
.right_margin = 0,
.upper_margin = 7,
.lower_margin = 40,
.hsync_len = 96,
.vsync_len = 1,
.sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
},
};
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "Sharp-LQ035Q7",
.mode = fb_modedb,
.num_modes = ARRAY_SIZE(fb_modedb),
};
static struct physmap_flash_data pcm043_flash_data = {
.width = 2,
};
static struct resource pcm043_flash_resource = {
.start = 0xa0000000,
.end = 0xa1ffffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device pcm043_flash = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &pcm043_flash_data,
},
.resource = &pcm043_flash_resource,
.num_resources = 1,
};
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = {
.bitrate = 50000,
};
static const struct property_entry board_eeprom_properties[] = {
PROPERTY_ENTRY_U32("pagesize", 32),
{ }
};
static struct i2c_board_info pcm043_i2c_devices[] = {
{
I2C_BOARD_INFO("24c32", 0x52), /* E0=0, E1=1, E2=0 */
.properties = board_eeprom_properties,
}, {
I2C_BOARD_INFO("pcf8563", 0x51),
},
};
static struct platform_device *devices[] __initdata = {
&pcm043_flash,
};
static const iomux_v3_cfg_t pcm043_pads[] __initconst = {
/* UART1 */
MX35_PAD_CTS1__UART1_CTS,
MX35_PAD_RTS1__UART1_RTS,
MX35_PAD_TXD1__UART1_TXD_MUX,
MX35_PAD_RXD1__UART1_RXD_MUX,
/* UART2 */
MX35_PAD_CTS2__UART2_CTS,
MX35_PAD_RTS2__UART2_RTS,
MX35_PAD_TXD2__UART2_TXD_MUX,
MX35_PAD_RXD2__UART2_RXD_MUX,
/* FEC */
MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
MX35_PAD_FEC_RX_DV__FEC_RX_DV,
MX35_PAD_FEC_COL__FEC_COL,
MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
MX35_PAD_FEC_TX_EN__FEC_TX_EN,
MX35_PAD_FEC_MDC__FEC_MDC,
MX35_PAD_FEC_MDIO__FEC_MDIO,
MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
MX35_PAD_FEC_CRS__FEC_CRS,
MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
/* I2C1 */
MX35_PAD_I2C1_CLK__I2C1_SCL,
MX35_PAD_I2C1_DAT__I2C1_SDA,
/* Display */
MX35_PAD_LD0__IPU_DISPB_DAT_0,
MX35_PAD_LD1__IPU_DISPB_DAT_1,
MX35_PAD_LD2__IPU_DISPB_DAT_2,
MX35_PAD_LD3__IPU_DISPB_DAT_3,
MX35_PAD_LD4__IPU_DISPB_DAT_4,
MX35_PAD_LD5__IPU_DISPB_DAT_5,
MX35_PAD_LD6__IPU_DISPB_DAT_6,
MX35_PAD_LD7__IPU_DISPB_DAT_7,
MX35_PAD_LD8__IPU_DISPB_DAT_8,
MX35_PAD_LD9__IPU_DISPB_DAT_9,
MX35_PAD_LD10__IPU_DISPB_DAT_10,
MX35_PAD_LD11__IPU_DISPB_DAT_11,
MX35_PAD_LD12__IPU_DISPB_DAT_12,
MX35_PAD_LD13__IPU_DISPB_DAT_13,
MX35_PAD_LD14__IPU_DISPB_DAT_14,
MX35_PAD_LD15__IPU_DISPB_DAT_15,
MX35_PAD_LD16__IPU_DISPB_DAT_16,
MX35_PAD_LD17__IPU_DISPB_DAT_17,
MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
/* gpio */
MX35_PAD_ATA_CS0__GPIO2_6,
/* USB host */
MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
/* SSI */
MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
/* CAN2 */
MX35_PAD_TX5_RX0__CAN2_TXCAN,
MX35_PAD_TX4_RX1__CAN2_RXCAN,
/* esdhc */
MX35_PAD_SD1_CMD__ESDHC1_CMD,
MX35_PAD_SD1_CLK__ESDHC1_CLK,
MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
MX35_PAD_ATA_DATA10__GPIO2_23, /* WriteProtect */
MX35_PAD_ATA_DATA11__GPIO2_24, /* CardDetect */
};
#define AC97_GPIO_TXFS IMX_GPIO_NR(2, 31)
#define AC97_GPIO_TXD IMX_GPIO_NR(2, 28)
#define AC97_GPIO_RESET IMX_GPIO_NR(2, 0)
static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
{
iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
int ret;
ret = gpio_request(AC97_GPIO_TXFS, "SSI");
if (ret) {
printk("failed to get GPIO_TXFS: %d\n", ret);
return;
}
mxc_iomux_v3_setup_pad(txfs_gpio);
/* warm reset */
gpio_direction_output(AC97_GPIO_TXFS, 1);
udelay(2);
gpio_set_value(AC97_GPIO_TXFS, 0);
gpio_free(AC97_GPIO_TXFS);
mxc_iomux_v3_setup_pad(txfs);
}
static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
{
iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
iomux_v3_cfg_t txd_gpio = MX35_PAD_STXD4__GPIO2_28;
iomux_v3_cfg_t txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD;
iomux_v3_cfg_t reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0;
int ret;
ret = gpio_request(AC97_GPIO_TXFS, "SSI");
if (ret)
goto err1;
ret = gpio_request(AC97_GPIO_TXD, "SSI");
if (ret)
goto err2;
ret = gpio_request(AC97_GPIO_RESET, "SSI");
if (ret)
goto err3;
mxc_iomux_v3_setup_pad(txfs_gpio);
mxc_iomux_v3_setup_pad(txd_gpio);
mxc_iomux_v3_setup_pad(reset_gpio);
gpio_direction_output(AC97_GPIO_TXFS, 0);
gpio_direction_output(AC97_GPIO_TXD, 0);
/* cold reset */
gpio_direction_output(AC97_GPIO_RESET, 0);
udelay(10);
gpio_direction_output(AC97_GPIO_RESET, 1);
mxc_iomux_v3_setup_pad(txd);
mxc_iomux_v3_setup_pad(txfs);
gpio_free(AC97_GPIO_RESET);
err3:
gpio_free(AC97_GPIO_TXD);
err2:
gpio_free(AC97_GPIO_TXFS);
err1:
if (ret)
printk("%s failed with %d\n", __func__, ret);
mdelay(1);
}
static const struct imx_ssi_platform_data pcm043_ssi_pdata __initconst = {
.ac97_reset = pcm043_ac97_cold_reset,
.ac97_warm_reset = pcm043_ac97_warm_reset,
.flags = IMX_SSI_USE_AC97,
};
static const struct mxc_nand_platform_data
pcm037_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
};
static int pcm043_otg_init(struct platform_device *pdev)
{
return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
}
static struct mxc_usbh_platform_data otg_pdata __initdata = {
.init = pcm043_otg_init,
.portsc = MXC_EHCI_MODE_UTMI,
};
static int pcm043_usbh1_init(struct platform_device *pdev)
{
return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
}
static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
.init = pcm043_usbh1_init,
.portsc = MXC_EHCI_MODE_SERIAL,
};
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_UTMI,
};
static bool otg_mode_host __initdata;
static int __init pcm043_otg_mode(char *options)
{
if (!strcmp(options, "host"))
otg_mode_host = true;
else if (!strcmp(options, "device"))
otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
return 1;
}
__setup("otg_mode=", pcm043_otg_mode);
static struct esdhc_platform_data sd1_pdata = {
.wp_type = ESDHC_WP_GPIO,
.cd_type = ESDHC_CD_GPIO,
};
static struct gpiod_lookup_table sd1_gpio_table = {
.dev_id = "sdhci-esdhc-imx35.0",
.table = {
/* Card detect: bank 2 offset 24 */
GPIO_LOOKUP("imx35-gpio.2", 24, "cd", GPIO_ACTIVE_LOW),
/* Write protect: bank 2 offset 23 */
GPIO_LOOKUP("imx35-gpio.2", 23, "wp", GPIO_ACTIVE_LOW),
{ },
},
};
/*
* Board specific initialization.
*/
static void __init pcm043_init(void)
{
imx35_soc_init();
mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
imx35_add_fec(NULL);
platform_add_devices(devices, ARRAY_SIZE(devices));
imx35_add_imx2_wdt();
imx35_add_imx_uart0(&uart_pdata);
imx35_add_mxc_nand(&pcm037_nand_board_info);
imx35_add_imx_uart1(&uart_pdata);
i2c_register_board_info(0, pcm043_i2c_devices,
ARRAY_SIZE(pcm043_i2c_devices));
imx35_add_imx_i2c0(&pcm043_i2c0_data);
imx35_add_ipu_core();
imx35_add_mx3_sdc_fb(&mx3fb_pdata);
if (otg_mode_host) {
otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (otg_pdata.otg)
imx35_add_mxc_ehci_otg(&otg_pdata);
}
imx35_add_mxc_ehci_hs(&usbh1_pdata);
if (!otg_mode_host)
imx35_add_fsl_usb2_udc(&otg_device_pdata);
imx35_add_flexcan1();
}
static void __init pcm043_late_init(void)
{
imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
gpiod_add_lookup_table(&sd1_gpio_table);
imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
}
static void __init pcm043_timer_init(void)
{
mx35_clocks_init();
}
MACHINE_START(PCM043, "Phytec Phycore pcm043")
/* Maintainer: Pengutronix */
.atag_offset = 0x100,
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
.init_time = pcm043_timer_init,
.init_machine = pcm043_init,
.init_late = pcm043_late_init,
.restart = mxc_restart,
MACHINE_END
arch/arm/mach-imx/mach-qong.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/memory.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/platnand.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <asm/page.h>
#include <asm/setup.h>
#include "common.h"
#include "devices-imx31.h"
#include "hardware.h"
#include "iomux-mx3.h"
/* FPGA defines */
#define QONG_FPGA_VERSION(major, minor, rev) \
(((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
#define QONG_FPGA_BASEADDR MX31_CS1_BASE_ADDR
#define QONG_FPGA_PERIPH_SIZE (1 << 24)
#define QONG_FPGA_CTRL_BASEADDR QONG_FPGA_BASEADDR
#define QONG_FPGA_CTRL_SIZE 0x10
/* FPGA control registers */
#define QONG_FPGA_CTRL_VERSION 0x00
#define QONG_DNET_ID 1
#define QONG_DNET_BASEADDR \
(QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE)
#define QONG_DNET_SIZE 0x00001000
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static int uart_pins[] = {
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1
};
static inline void __init mxc_init_imx_uart(void)
{
mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins),
"uart-0");
imx31_add_imx_uart0(&uart_pdata);
}
static struct resource dnet_resources[] = {
{
.name = "dnet-memory",
.start = QONG_DNET_BASEADDR,
.end = QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
.flags = IORESOURCE_MEM,
}, {
/* irq number is run-time assigned */
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dnet_device = {
.name = "dnet",
.id = -1,
.num_resources = ARRAY_SIZE(dnet_resources),
.resource = dnet_resources,
};
static int __init qong_init_dnet(void)
{
int ret;
dnet_resources[1].start =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1));
dnet_resources[1].end =
gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1));
ret = platform_device_register(&dnet_device);
return ret;
}
/* MTD NOR flash */
static struct physmap_flash_data qong_flash_data = {
.width = 2,
};
static struct resource qong_flash_resource = {
.start = MX31_CS0_BASE_ADDR,
.end = MX31_CS0_BASE_ADDR + SZ_128M - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device qong_nor_mtd_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &qong_flash_data,
},
.resource = &qong_flash_resource,
.num_resources = 1,
};
static void qong_init_nor_mtd(void)
{
(void)platform_device_register(&qong_nor_mtd_device);
}
/*
* Hardware specific access to control-lines
*/
static void qong_nand_cmd_ctrl(struct nand_chip *nand_chip, int cmd,
unsigned int ctrl)
{
if (cmd == NAND_CMD_NONE)
return;
if (ctrl & NAND_CLE)
writeb(cmd, nand_chip->legacy.IO_ADDR_W + (1 << 24));
else
writeb(cmd, nand_chip->legacy.IO_ADDR_W + (1 << 23));
}
/*
* Read the Device Ready pin.
*/
static int qong_nand_device_ready(struct nand_chip *chip)
{
return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_NFRB));
}
static void qong_nand_select_chip(struct nand_chip *chip, int cs)
{
if (cs >= 0)
gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
else
gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 1);
}
static struct platform_nand_data qong_nand_data = {
.chip = {
.nr_chips = 1,
.chip_delay = 20,
.options = 0,
},
.ctrl = {
.cmd_ctrl = qong_nand_cmd_ctrl,
.dev_ready = qong_nand_device_ready,
.select_chip = qong_nand_select_chip,
}
};
static struct resource qong_nand_resource = {
.start = MX31_CS3_BASE_ADDR,
.end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device qong_nand_device = {
.name = "gen_nand",
.id = -1,
.dev = {
.platform_data = &qong_nand_data,
},
.num_resources = 1,
.resource = &qong_nand_resource,
};
static void __init qong_init_nand_mtd(void)
{
/* init CS */
imx_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3)));
imx_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3)));
imx_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3)));
mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
/* enable pin */
mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFCE_B, IOMUX_CONFIG_GPIO));
if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), "nand_enable"))
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
/* ready/busy pin */
mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFRB, IOMUX_CONFIG_GPIO));
if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFRB), "nand_rdy"))
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFRB));
/* write protect pin */
mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFWP_B, IOMUX_CONFIG_GPIO));
if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFWP_B), "nand_wp"))
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFWP_B));
platform_device_register(&qong_nand_device);
}
static void __init qong_init_fpga(void)
{
void __iomem *regs;
u32 fpga_ver;
regs = ioremap(QONG_FPGA_CTRL_BASEADDR, QONG_FPGA_CTRL_SIZE);
if (!regs) {
printk(KERN_ERR "%s: failed to map registers, aborting.\n",
__func__);
return;
}
fpga_ver = readl(regs + QONG_FPGA_CTRL_VERSION);
iounmap(regs);
printk(KERN_INFO "Qong FPGA version %d.%d.%d\n",
(fpga_ver & 0xF000) >> 12,
(fpga_ver & 0x0F00) >> 8, fpga_ver & 0x00FF);
if (fpga_ver < QONG_FPGA_VERSION(0, 8, 7)) {
printk(KERN_ERR "qong: Unexpected FPGA version, FPGA-based "
"devices won't be registered!\n");
return;
}
/* register FPGA-based devices */
qong_init_nand_mtd();
qong_init_dnet();
}
/*
* Board specific initialization.
*/
static void __init qong_init(void)
{
imx31_soc_init();
mxc_init_imx_uart();
qong_init_nor_mtd();
imx31_add_imx2_wdt();
}
static void __init qong_timer_init(void)
{
mx31_clocks_init(26000000);
}
MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
/* Maintainer: DENX Software Engineering GmbH */
.atag_offset = 0x100,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.init_time = qong_timer_init,
.init_machine = qong_init,
.init_late = qong_init_fpga,
.restart = mxc_restart,
MACHINE_END
arch/arm/mach-imx/mach-vpr200.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
* Copyright 2010 Creative Product Design
*
* Derived from mx35 3stack.
* Original author: Fabio Estevam <fabio.estevam@freescale.com>
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/memory.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <linux/i2c.h>
#include <linux/mfd/mc13xxx.h>
#include "common.h"
#include "devices-imx35.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx35.h"
#define GPIO_LCDPWR IMX_GPIO_NR(1, 2)
#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0)
#define GPIO_BUTTON1 IMX_GPIO_NR(1, 4)
#define GPIO_BUTTON2 IMX_GPIO_NR(1, 5)
#define GPIO_BUTTON3 IMX_GPIO_NR(1, 7)
#define GPIO_BUTTON4 IMX_GPIO_NR(1, 8)
#define GPIO_BUTTON5 IMX_GPIO_NR(1, 9)
#define GPIO_BUTTON6 IMX_GPIO_NR(1, 10)
#define GPIO_BUTTON7 IMX_GPIO_NR(1, 11)
#define GPIO_BUTTON8 IMX_GPIO_NR(1, 12)
static const struct fb_videomode fb_modedb[] = {
{
/* 800x480 @ 60 Hz */
.name = "PT0708048",
.refresh = 60,
.xres = 800,
.yres = 480,
.pixclock = KHZ2PICOS(33260),
.left_margin = 50,
.right_margin = 156,
.upper_margin = 10,
.lower_margin = 10,
.hsync_len = 1, /* note: DE only display */
.vsync_len = 1, /* note: DE only display */
.sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
}, {
/* 800x480 @ 60 Hz */
.name = "CTP-CLAA070LC0ACW",
.refresh = 60,
.xres = 800,
.yres = 480,
.pixclock = KHZ2PICOS(27000),
.left_margin = 50,
.right_margin = 50, /* whole line should have 900 clocks */
.upper_margin = 10,
.lower_margin = 10, /* whole frame should have 500 lines */
.hsync_len = 1, /* note: DE only display */
.vsync_len = 1, /* note: DE only display */
.sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
}
};
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.name = "PT0708048",
.mode = fb_modedb,
.num_modes = ARRAY_SIZE(fb_modedb),
};
static struct physmap_flash_data vpr200_flash_data = {
.width = 2,
};
static struct resource vpr200_flash_resource = {
.start = MX35_CS0_BASE_ADDR,
.end = MX35_CS0_BASE_ADDR + SZ_64M - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device vpr200_flash = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &vpr200_flash_data,
},
.resource = &vpr200_flash_resource,
.num_resources = 1,
};
static const struct mxc_nand_platform_data
vpr200_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
.flash_bbt = 1,
};
#define VPR_KEY_DEBOUNCE 500
static struct gpio_keys_button vpr200_gpio_keys_table[] = {
{KEY_F2, GPIO_BUTTON1, 1, "vpr-keys: F2", 0, VPR_KEY_DEBOUNCE},
{KEY_F3, GPIO_BUTTON2, 1, "vpr-keys: F3", 0, VPR_KEY_DEBOUNCE},
{KEY_F4, GPIO_BUTTON3, 1, "vpr-keys: F4", 0, VPR_KEY_DEBOUNCE},
{KEY_F5, GPIO_BUTTON4, 1, "vpr-keys: F5", 0, VPR_KEY_DEBOUNCE},
{KEY_F6, GPIO_BUTTON5, 1, "vpr-keys: F6", 0, VPR_KEY_DEBOUNCE},
{KEY_F7, GPIO_BUTTON6, 1, "vpr-keys: F7", 0, VPR_KEY_DEBOUNCE},
{KEY_F8, GPIO_BUTTON7, 1, "vpr-keys: F8", 1, VPR_KEY_DEBOUNCE},
{KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE},
};
static const struct gpio_keys_platform_data
vpr200_gpio_keys_data __initconst = {
.buttons = vpr200_gpio_keys_table,
.nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table),
};
static struct mc13xxx_platform_data vpr200_pmic = {
.flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
};
static const struct imxi2c_platform_data vpr200_i2c0_data __initconst = {
.bitrate = 50000,
};
static struct i2c_board_info vpr200_i2c_devices[] = {
{
I2C_BOARD_INFO("24c02", 0x50), /* E0=0, E1=0, E2=0 */
}, {
I2C_BOARD_INFO("mc13892", 0x08),
.platform_data = &vpr200_pmic,
/* irq number is run-time assigned */
}
};
static const iomux_v3_cfg_t vpr200_pads[] __initconst = {
/* UART1 */
MX35_PAD_TXD1__UART1_TXD_MUX,
MX35_PAD_RXD1__UART1_RXD_MUX,
/* UART3 */
MX35_PAD_ATA_DATA10__UART3_RXD_MUX,
MX35_PAD_ATA_DATA11__UART3_TXD_MUX,
/* FEC */
MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
MX35_PAD_FEC_RX_DV__FEC_RX_DV,
MX35_PAD_FEC_COL__FEC_COL,
MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
MX35_PAD_FEC_TX_EN__FEC_TX_EN,
MX35_PAD_FEC_MDC__FEC_MDC,
MX35_PAD_FEC_MDIO__FEC_MDIO,
MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
MX35_PAD_FEC_CRS__FEC_CRS,
MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
/* Display */
MX35_PAD_LD0__IPU_DISPB_DAT_0,
MX35_PAD_LD1__IPU_DISPB_DAT_1,
MX35_PAD_LD2__IPU_DISPB_DAT_2,
MX35_PAD_LD3__IPU_DISPB_DAT_3,
MX35_PAD_LD4__IPU_DISPB_DAT_4,
MX35_PAD_LD5__IPU_DISPB_DAT_5,
MX35_PAD_LD6__IPU_DISPB_DAT_6,
MX35_PAD_LD7__IPU_DISPB_DAT_7,
MX35_PAD_LD8__IPU_DISPB_DAT_8,
MX35_PAD_LD9__IPU_DISPB_DAT_9,
MX35_PAD_LD10__IPU_DISPB_DAT_10,
MX35_PAD_LD11__IPU_DISPB_DAT_11,
MX35_PAD_LD12__IPU_DISPB_DAT_12,
MX35_PAD_LD13__IPU_DISPB_DAT_13,
MX35_PAD_LD14__IPU_DISPB_DAT_14,
MX35_PAD_LD15__IPU_DISPB_DAT_15,
MX35_PAD_LD16__IPU_DISPB_DAT_16,
MX35_PAD_LD17__IPU_DISPB_DAT_17,
MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
/* LCD Enable */
MX35_PAD_D3_VSYNC__GPIO1_2,
/* USBOTG */
MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
/* SDCARD */
MX35_PAD_SD1_CMD__ESDHC1_CMD,
MX35_PAD_SD1_CLK__ESDHC1_CLK,
MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
/* PMIC */
MX35_PAD_GPIO2_0__GPIO2_0,
/* GPIO keys */
MX35_PAD_SCKR__GPIO1_4,
MX35_PAD_COMPARE__GPIO1_5,
MX35_PAD_SCKT__GPIO1_7,
MX35_PAD_FST__GPIO1_8,
MX35_PAD_HCKT__GPIO1_9,
MX35_PAD_TX5_RX0__GPIO1_10,
MX35_PAD_TX4_RX1__GPIO1_11,
MX35_PAD_TX3_RX2__GPIO1_12,
};
/* USB Device config */
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_UTMI,
.workaround = FLS_USB2_WORKAROUND_ENGCM09152,
};
static int vpr200_usbh_init(struct platform_device *pdev)
{
return mx35_initialize_usb_hw(pdev->id,
MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY);
}
/* USB HOST config */
static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
.init = vpr200_usbh_init,
.portsc = MXC_EHCI_MODE_SERIAL,
};
static struct platform_device *devices[] __initdata = {
&vpr200_flash,
};
/*
* Board specific initialization.
*/
static void __init vpr200_board_init(void)
{
imx35_soc_init();
mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads));
imx35_add_fec(NULL);
imx35_add_imx2_wdt();
imx35_add_imx_uart0(NULL);
imx35_add_imx_uart2(NULL);
imx35_add_ipu_core();
imx35_add_mx3_sdc_fb(&mx3fb_pdata);
imx35_add_fsl_usb2_udc(&otg_device_pdata);
imx35_add_mxc_ehci_hs(&usb_host_pdata);
imx35_add_mxc_nand(&vpr200_nand_board_info);
imx35_add_sdhci_esdhc_imx(0, NULL);
}
static void __init vpr200_late_init(void)
{
imx_add_gpio_keys(&vpr200_gpio_keys_data);
platform_add_devices(devices, ARRAY_SIZE(devices));
if (0 != gpio_request(GPIO_LCDPWR, "LCDPWR"))
printk(KERN_WARNING "vpr200: Couldn't get LCDPWR gpio\n");
else
gpio_direction_output(GPIO_LCDPWR, 0);
if (0 != gpio_request(GPIO_PMIC_INT, "PMIC_INT"))
printk(KERN_WARNING "vpr200: Couldn't get PMIC_INT gpio\n");
else
gpio_direction_input(GPIO_PMIC_INT);
vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT);
i2c_register_board_info(0, vpr200_i2c_devices,
ARRAY_SIZE(vpr200_i2c_devices));
imx35_add_imx_i2c0(&vpr200_i2c0_data);
}
static void __init vpr200_timer_init(void)
{
mx35_clocks_init();
}
MACHINE_START(VPR200, "VPR200")
/* Maintainer: Creative Product Design */
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
.init_time = vpr200_timer_init,
.init_machine = vpr200_board_init,
.init_late = vpr200_late_init,
.restart = mxc_restart,
MACHINE_END
arch/arm/mach-imx/mm-imx21.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* arch/arm/mach-imx/mm-imx21.c
*
* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/pinctrl/machine.h>
#include <asm/mach/map.h>
#include "common.h"
#include "devices/devices-common.h"
#include "hardware.h"
#include "iomux-v1.h"
/* MX21 memory map definition */
static struct map_desc imx21_io_desc[] __initdata = {
/*
* this fixed mapping covers:
* - AIPI1
* - AIPI2
* - AITC
* - ROM Patch
* - and some reserved space
*/
imx_map_entry(MX21, AIPI, MT_DEVICE),
/*
* this fixed mapping covers:
* - CSI
* - ATA
*/
imx_map_entry(MX21, SAHB1, MT_DEVICE),
/*
* this fixed mapping covers:
* - EMI
*/
imx_map_entry(MX21, X_MEMC, MT_DEVICE),
};
/*
* Initialize the memory map. It is called during the
* system startup to create static physical to virtual
* memory map for the IO modules.
*/
void __init mx21_map_io(void)
{
iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc));
}
void __init imx21_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX21);
imx_iomuxv1_init(MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR),
MX21_NUM_GPIO_PORT);
}
void __init mx21_init_irq(void)
{
mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
}
static const struct resource imx21_audmux_res[] __initconst = {
DEFINE_RES_MEM(MX21_AUDMUX_BASE_ADDR, SZ_4K),
};
void __init imx21_soc_init(void)
{
mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR));
mxc_device_init();
mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 1, MX21_GPIO2_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 2, MX21_GPIO3_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 3, MX21_GPIO4_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
pinctrl_provide_dummies();
imx_add_imx_dma("imx21-dma", MX21_DMA_BASE_ADDR, MX21_INT_DMACH0);
platform_device_register_simple("imx21-audmux", 0, imx21_audmux_res,
ARRAY_SIZE(imx21_audmux_res));
}
arch/arm/mach-imx/mm-imx3.c
View file @ accdab6d
...@@ -11,6 +11,7 @@ ...@@ -11,6 +11,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/err.h> #include <linux/err.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/of_address.h>
#include <linux/pinctrl/machine.h> #include <linux/pinctrl/machine.h>
#include <asm/system_misc.h> #include <asm/system_misc.h>
...@@ -19,9 +20,7 @@ ...@@ -19,9 +20,7 @@
#include "common.h" #include "common.h"
#include "crmregs-imx3.h" #include "crmregs-imx3.h"
#include "devices/devices-common.h"
#include "hardware.h" #include "hardware.h"
#include "iomux-v3.h"
void __iomem *mx3_ccm_base; void __iomem *mx3_ccm_base;
...@@ -71,40 +70,6 @@ static void __iomem *imx3_ioremap_caller(phys_addr_t phys_addr, size_t size, ...@@ -71,40 +70,6 @@ static void __iomem *imx3_ioremap_caller(phys_addr_t phys_addr, size_t size,
return __arm_ioremap_caller(phys_addr, size, mtype, caller); return __arm_ioremap_caller(phys_addr, size, mtype, caller);
} }
static void __init imx3_init_l2x0(void)
{
#ifdef CONFIG_CACHE_L2X0
void __iomem *l2x0_base;
void __iomem *clkctl_base;
/*
* First of all, we must repair broken chip settings. There are some
* i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
* misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
* Workaraound is to setup the correct register setting prior enabling the
* L2 cache. This should not hurt already working CPUs, as they are using the
* same value.
*/
#define L2_MEM_VAL 0x10
clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
if (clkctl_base != NULL) {
writel(0x00000515, clkctl_base + L2_MEM_VAL);
iounmap(clkctl_base);
} else {
pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
}
l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
if (!l2x0_base) {
printk(KERN_ERR "remapping L2 cache area failed\n");
return;
}
l2x0_init(l2x0_base, 0x00030024, 0x00000000);
#endif
}
#ifdef CONFIG_SOC_IMX31 #ifdef CONFIG_SOC_IMX31
static struct map_desc mx31_io_desc[] __initdata = { static struct map_desc mx31_io_desc[] __initdata = {
imx_map_entry(MX31, X_MEMC, MT_DEVICE), imx_map_entry(MX31, X_MEMC, MT_DEVICE),
...@@ -135,70 +100,26 @@ static void imx31_idle(void) ...@@ -135,70 +100,26 @@ static void imx31_idle(void)
void __init imx31_init_early(void) void __init imx31_init_early(void)
{ {
struct device_node *np;
mxc_set_cpu_type(MXC_CPU_MX31); mxc_set_cpu_type(MXC_CPU_MX31);
arch_ioremap_caller = imx3_ioremap_caller; arch_ioremap_caller = imx3_ioremap_caller;
arm_pm_idle = imx31_idle; arm_pm_idle = imx31_idle;
mx3_ccm_base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR); np = of_find_compatible_node(NULL, NULL, "fsl,imx31-ccm");
mx3_ccm_base = of_iomap(np, 0);
BUG_ON(!mx3_ccm_base);
} }
void __init mx31_init_irq(void) void __init mx31_init_irq(void)
{ {
mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR)); void __iomem *avic_base;
} struct device_node *np;
static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
.per_2_per_addr = 1677,
};
static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = {
.ap_2_ap_addr = 423,
.ap_2_bp_addr = 829,
.bp_2_ap_addr = 1029,
};
static struct sdma_platform_data imx31_sdma_pdata __initdata = {
.fw_name = "sdma-imx31-to2.bin",
.script_addrs = &imx31_to2_sdma_script,
};
static const struct resource imx31_audmux_res[] __initconst = {
DEFINE_RES_MEM(MX31_AUDMUX_BASE_ADDR, SZ_16K),
};
static const struct resource imx31_rnga_res[] __initconst = {
DEFINE_RES_MEM(MX31_RNGA_BASE_ADDR, SZ_16K),
};
void __init imx31_soc_init(void)
{
int to_version = mx31_revision() >> 4;
imx3_init_l2x0(); np = of_find_compatible_node(NULL, NULL, "fsl,imx31-avic");
avic_base = of_iomap(np, 0);
BUG_ON(!avic_base);
mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); mxc_init_irq(avic_base);
mxc_device_init();
mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
pinctrl_provide_dummies();
if (to_version == 1) {
strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
strlen(imx31_sdma_pdata.fw_name));
imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script;
}
imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS1_BASE_ADDR));
imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS2_BASE_ADDR));
platform_device_register_simple("imx31-audmux", 0, imx31_audmux_res,
ARRAY_SIZE(imx31_audmux_res));
platform_device_register_simple("mxc_rnga", -1, imx31_rnga_res,
ARRAY_SIZE(imx31_rnga_res));
} }
#endif /* ifdef CONFIG_SOC_IMX31 */ #endif /* ifdef CONFIG_SOC_IMX31 */
...@@ -228,85 +149,25 @@ static void imx35_idle(void) ...@@ -228,85 +149,25 @@ static void imx35_idle(void)
void __init imx35_init_early(void) void __init imx35_init_early(void)
{ {
struct device_node *np;
mxc_set_cpu_type(MXC_CPU_MX35); mxc_set_cpu_type(MXC_CPU_MX35);
mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
arm_pm_idle = imx35_idle; arm_pm_idle = imx35_idle;
arch_ioremap_caller = imx3_ioremap_caller; arch_ioremap_caller = imx3_ioremap_caller;
mx3_ccm_base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR); np = of_find_compatible_node(NULL, NULL, "fsl,imx35-ccm");
mx3_ccm_base = of_iomap(np, 0);
BUG_ON(!mx3_ccm_base);
} }
void __init mx35_init_irq(void) void __init mx35_init_irq(void)
{ {
mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); void __iomem *avic_base;
} struct device_node *np;
static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
.ap_2_ap_addr = 642,
.uart_2_mcu_addr = 817,
.mcu_2_app_addr = 747,
.uartsh_2_mcu_addr = 1183,
.per_2_shp_addr = 1033,
.mcu_2_shp_addr = 961,
.ata_2_mcu_addr = 1333,
.mcu_2_ata_addr = 1252,
.app_2_mcu_addr = 683,
.shp_2_per_addr = 1111,
.shp_2_mcu_addr = 892,
};
static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = {
.ap_2_ap_addr = 729,
.uart_2_mcu_addr = 904,
.per_2_app_addr = 1597,
.mcu_2_app_addr = 834,
.uartsh_2_mcu_addr = 1270,
.per_2_shp_addr = 1120,
.mcu_2_shp_addr = 1048,
.ata_2_mcu_addr = 1429,
.mcu_2_ata_addr = 1339,
.app_2_per_addr = 1531,
.app_2_mcu_addr = 770,
.shp_2_per_addr = 1198,
.shp_2_mcu_addr = 979,
};
static struct sdma_platform_data imx35_sdma_pdata __initdata = {
.fw_name = "sdma-imx35-to2.bin",
.script_addrs = &imx35_to2_sdma_script,
};
static const struct resource imx35_audmux_res[] __initconst = {
DEFINE_RES_MEM(MX35_AUDMUX_BASE_ADDR, SZ_16K),
};
void __init imx35_soc_init(void)
{
int to_version = mx35_revision() >> 4;
imx3_init_l2x0();
mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
mxc_device_init();
mxc_register_gpio("imx35-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
mxc_register_gpio("imx35-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
mxc_register_gpio("imx35-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
pinctrl_provide_dummies();
if (to_version == 1) {
strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
strlen(imx35_sdma_pdata.fw_name));
imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script;
}
imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
/* Setup AIPS registers */ np = of_find_compatible_node(NULL, NULL, "fsl,imx35-avic");
imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS1_BASE_ADDR)); avic_base = of_iomap(np, 0);
imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS2_BASE_ADDR)); BUG_ON(!avic_base);
/* i.mx35 has the i.mx31 type audmux */ mxc_init_irq(avic_base);
platform_device_register_simple("imx31-audmux", 0, imx35_audmux_res,
ARRAY_SIZE(imx35_audmux_res));
} }
#endif /* ifdef CONFIG_SOC_IMX35 */ #endif /* ifdef CONFIG_SOC_IMX35 */
arch/arm/mach-imx/mx21.h deleted 100644 → 0
View file @ a4f07008
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
* Copyright 2009 Holger Schurig, hs4233@mail.mn-solutions.de
*
* This contains i.MX21-specific hardware definitions. For those
* hardware pieces that are common between i.MX21 and i.MX27, have a
* look at mx2x.h.
*/
#ifndef __MACH_MX21_H__
#define __MACH_MX21_H__
#define MX21_AIPI_BASE_ADDR 0x10000000
#define MX21_AIPI_SIZE SZ_1M
#define MX21_DMA_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x01000)
#define MX21_WDOG_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x02000)
#define MX21_GPT1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x03000)
#define MX21_GPT2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x04000)
#define MX21_GPT3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x05000)
#define MX21_PWM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x06000)
#define MX21_RTC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x07000)
#define MX21_KPP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x08000)
#define MX21_OWIRE_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x09000)
#define MX21_UART1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0a000)
#define MX21_UART2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0b000)
#define MX21_UART3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0c000)
#define MX21_UART4_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0d000)
#define MX21_CSPI1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0e000)
#define MX21_CSPI2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0f000)
#define MX21_SSI1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x10000)
#define MX21_SSI2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x11000)
#define MX21_I2C_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x12000)
#define MX21_SDHC1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x13000)
#define MX21_SDHC2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x14000)
#define MX21_GPIO_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x15000)
#define MX21_GPIO1_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x000)
#define MX21_GPIO2_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x100)
#define MX21_GPIO3_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x200)
#define MX21_GPIO4_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x300)
#define MX21_GPIO5_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x400)
#define MX21_GPIO6_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x500)
#define MX21_AUDMUX_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x16000)
#define MX21_CSPI3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x17000)
#define MX21_LCDC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x21000)
#define MX21_SLCDC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x22000)
#define MX21_USBOTG_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x24000)
#define MX21_EMMA_PP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x26000)
#define MX21_EMMA_PRP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x26400)
#define MX21_CCM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x27000)
#define MX21_SYSCTRL_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x27800)
#define MX21_JAM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x3e000)
#define MX21_MAX_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x3f000)
#define MX21_AVIC_BASE_ADDR 0x10040000
#define MX21_SAHB1_BASE_ADDR 0x80000000
#define MX21_SAHB1_SIZE SZ_1M
#define MX21_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000)
/* Memory regions and CS */
#define MX21_SDRAM_BASE_ADDR 0xc0000000
#define MX21_CSD1_BASE_ADDR 0xc4000000
#define MX21_CS0_BASE_ADDR 0xc8000000
#define MX21_CS1_BASE_ADDR 0xcc000000
#define MX21_CS2_BASE_ADDR 0xd0000000
#define MX21_CS3_BASE_ADDR 0xd1000000
#define MX21_CS4_BASE_ADDR 0xd2000000
#define MX21_PCMCIA_MEM_BASE_ADDR 0xd4000000
#define MX21_CS5_BASE_ADDR 0xdd000000
/* NAND, SDRAM, WEIM etc controllers */
#define MX21_X_MEMC_BASE_ADDR 0xdf000000
#define MX21_X_MEMC_SIZE SZ_256K
#define MX21_SDRAMC_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x0000)
#define MX21_EIM_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x1000)
#define MX21_PCMCIA_CTL_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x2000)
#define MX21_NFC_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x3000)
#define MX21_IRAM_BASE_ADDR 0xffffe800 /* internal ram */
#define MX21_IO_P2V(x) IMX_IO_P2V(x)
#define MX21_IO_ADDRESS(x) IOMEM(MX21_IO_P2V(x))
/* fixed interrupt numbers */
#include <asm/irq.h>
#define MX21_INT_CSPI3 (NR_IRQS_LEGACY + 6)
#define MX21_INT_GPIO (NR_IRQS_LEGACY + 8)
#define MX21_INT_FIRI (NR_IRQS_LEGACY + 9)
#define MX21_INT_SDHC2 (NR_IRQS_LEGACY + 10)
#define MX21_INT_SDHC1 (NR_IRQS_LEGACY + 11)
#define MX21_INT_I2C (NR_IRQS_LEGACY + 12)
#define MX21_INT_SSI2 (NR_IRQS_LEGACY + 13)
#define MX21_INT_SSI1 (NR_IRQS_LEGACY + 14)
#define MX21_INT_CSPI2 (NR_IRQS_LEGACY + 15)
#define MX21_INT_CSPI1 (NR_IRQS_LEGACY + 16)
#define MX21_INT_UART4 (NR_IRQS_LEGACY + 17)
#define MX21_INT_UART3 (NR_IRQS_LEGACY + 18)
#define MX21_INT_UART2 (NR_IRQS_LEGACY + 19)
#define MX21_INT_UART1 (NR_IRQS_LEGACY + 20)
#define MX21_INT_KPP (NR_IRQS_LEGACY + 21)
#define MX21_INT_RTC (NR_IRQS_LEGACY + 22)
#define MX21_INT_PWM (NR_IRQS_LEGACY + 23)
#define MX21_INT_GPT3 (NR_IRQS_LEGACY + 24)
#define MX21_INT_GPT2 (NR_IRQS_LEGACY + 25)
#define MX21_INT_GPT1 (NR_IRQS_LEGACY + 26)
#define MX21_INT_WDOG (NR_IRQS_LEGACY + 27)
#define MX21_INT_PCMCIA (NR_IRQS_LEGACY + 28)
#define MX21_INT_NFC (NR_IRQS_LEGACY + 29)
#define MX21_INT_BMI (NR_IRQS_LEGACY + 30)
#define MX21_INT_CSI (NR_IRQS_LEGACY + 31)
#define MX21_INT_DMACH0 (NR_IRQS_LEGACY + 32)
#define MX21_INT_DMACH1 (NR_IRQS_LEGACY + 33)
#define MX21_INT_DMACH2 (NR_IRQS_LEGACY + 34)
#define MX21_INT_DMACH3 (NR_IRQS_LEGACY + 35)
#define MX21_INT_DMACH4 (NR_IRQS_LEGACY + 36)
#define MX21_INT_DMACH5 (NR_IRQS_LEGACY + 37)
#define MX21_INT_DMACH6 (NR_IRQS_LEGACY + 38)
#define MX21_INT_DMACH7 (NR_IRQS_LEGACY + 39)
#define MX21_INT_DMACH8 (NR_IRQS_LEGACY + 40)
#define MX21_INT_DMACH9 (NR_IRQS_LEGACY + 41)
#define MX21_INT_DMACH10 (NR_IRQS_LEGACY + 42)
#define MX21_INT_DMACH11 (NR_IRQS_LEGACY + 43)
#define MX21_INT_DMACH12 (NR_IRQS_LEGACY + 44)
#define MX21_INT_DMACH13 (NR_IRQS_LEGACY + 45)
#define MX21_INT_DMACH14 (NR_IRQS_LEGACY + 46)
#define MX21_INT_DMACH15 (NR_IRQS_LEGACY + 47)
#define MX21_INT_EMMAENC (NR_IRQS_LEGACY + 49)
#define MX21_INT_EMMADEC (NR_IRQS_LEGACY + 50)
#define MX21_INT_EMMAPRP (NR_IRQS_LEGACY + 51)
#define MX21_INT_EMMAPP (NR_IRQS_LEGACY + 52)
#define MX21_INT_USBWKUP (NR_IRQS_LEGACY + 53)
#define MX21_INT_USBDMA (NR_IRQS_LEGACY + 54)
#define MX21_INT_USBHOST (NR_IRQS_LEGACY + 55)
#define MX21_INT_USBFUNC (NR_IRQS_LEGACY + 56)
#define MX21_INT_USBMNP (NR_IRQS_LEGACY + 57)
#define MX21_INT_USBCTRL (NR_IRQS_LEGACY + 58)
#define MX21_INT_SLCDC (NR_IRQS_LEGACY + 60)
#define MX21_INT_LCDC (NR_IRQS_LEGACY + 61)
/* fixed DMA request numbers */
#define MX21_DMA_REQ_CSPI3_RX 1
#define MX21_DMA_REQ_CSPI3_TX 2
#define MX21_DMA_REQ_EXT 3
#define MX21_DMA_REQ_FIRI_RX 4
#define MX21_DMA_REQ_SDHC2 6
#define MX21_DMA_REQ_SDHC1 7
#define MX21_DMA_REQ_SSI2_RX0 8
#define MX21_DMA_REQ_SSI2_TX0 9
#define MX21_DMA_REQ_SSI2_RX1 10
#define MX21_DMA_REQ_SSI2_TX1 11
#define MX21_DMA_REQ_SSI1_RX0 12
#define MX21_DMA_REQ_SSI1_TX0 13
#define MX21_DMA_REQ_SSI1_RX1 14
#define MX21_DMA_REQ_SSI1_TX1 15
#define MX21_DMA_REQ_CSPI2_RX 16
#define MX21_DMA_REQ_CSPI2_TX 17
#define MX21_DMA_REQ_CSPI1_RX 18
#define MX21_DMA_REQ_CSPI1_TX 19
#define MX21_DMA_REQ_UART4_RX 20
#define MX21_DMA_REQ_UART4_TX 21
#define MX21_DMA_REQ_UART3_RX 22
#define MX21_DMA_REQ_UART3_TX 23
#define MX21_DMA_REQ_UART2_RX 24
#define MX21_DMA_REQ_UART2_TX 25
#define MX21_DMA_REQ_UART1_RX 26
#define MX21_DMA_REQ_UART1_TX 27
#define MX21_DMA_REQ_BMI_TX 28
#define MX21_DMA_REQ_BMI_RX 29
#define MX21_DMA_REQ_CSI_STAT 30
#define MX21_DMA_REQ_CSI_RX 31
#endif /* ifndef __MACH_MX21_H__ */
arch/arm/mach-imx/mx27.h
View file @ accdab6d
...@@ -13,209 +13,13 @@ ...@@ -13,209 +13,13 @@
#define MX27_AIPI_BASE_ADDR 0x10000000 #define MX27_AIPI_BASE_ADDR 0x10000000
#define MX27_AIPI_SIZE SZ_1M #define MX27_AIPI_SIZE SZ_1M
#define MX27_DMA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x01000)
#define MX27_WDOG_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x02000)
#define MX27_GPT1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x03000)
#define MX27_GPT2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x04000)
#define MX27_GPT3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x05000)
#define MX27_PWM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x06000)
#define MX27_RTC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x07000)
#define MX27_KPP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x08000)
#define MX27_OWIRE_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x09000)
#define MX27_UART1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0a000)
#define MX27_UART2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0b000)
#define MX27_UART3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0c000)
#define MX27_UART4_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0d000)
#define MX27_CSPI1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0e000)
#define MX27_CSPI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0f000)
#define MX27_SSI1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x10000)
#define MX27_SSI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x11000)
#define MX27_I2C1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x12000)
#define MX27_SDHC1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x13000)
#define MX27_SDHC2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x14000)
#define MX27_GPIO_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x15000)
#define MX27_GPIO1_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x000)
#define MX27_GPIO2_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x100)
#define MX27_GPIO3_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x200)
#define MX27_GPIO4_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x300)
#define MX27_GPIO5_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x400)
#define MX27_GPIO6_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x500)
#define MX27_AUDMUX_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x16000)
#define MX27_CSPI3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x17000)
#define MX27_MSHC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x18000)
#define MX27_GPT4_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x19000)
#define MX27_GPT5_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1a000)
#define MX27_UART5_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1b000)
#define MX27_UART6_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1c000)
#define MX27_I2C2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1d000)
#define MX27_SDHC3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1e000)
#define MX27_GPT6_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1f000)
#define MX27_LCDC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x21000)
#define MX27_SLCDC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x22000)
#define MX27_VPU_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x23000)
#define MX27_USB_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x24000)
#define MX27_USB_OTG_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0000)
#define MX27_USB_HS1_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0200)
#define MX27_USB_HS2_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0400)
#define MX27_SAHARA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x25000)
#define MX27_EMMAPP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26000)
#define MX27_EMMAPRP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26400)
#define MX27_CCM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x27000)
#define MX27_SYSCTRL_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x27800)
#define MX27_IIM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x28000)
#define MX27_RTIC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2a000)
#define MX27_FEC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2b000)
#define MX27_SCC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2c000)
#define MX27_ETB_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3b000)
#define MX27_ETB_RAM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3c000)
#define MX27_JAM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3e000)
#define MX27_MAX_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3f000)
#define MX27_AVIC_BASE_ADDR 0x10040000
/* ROM patch */
#define MX27_ROMP_BASE_ADDR 0x10041000
#define MX27_SAHB1_BASE_ADDR 0x80000000 #define MX27_SAHB1_BASE_ADDR 0x80000000
#define MX27_SAHB1_SIZE SZ_1M #define MX27_SAHB1_SIZE SZ_1M
#define MX27_CSI_BASE_ADDR (MX27_SAHB1_BASE_ADDR + 0x0000)
#define MX27_ATA_BASE_ADDR (MX27_SAHB1_BASE_ADDR + 0x1000)
/* Memory regions and CS */
#define MX27_SDRAM_BASE_ADDR 0xa0000000
#define MX27_CSD1_BASE_ADDR 0xb0000000
#define MX27_CS0_BASE_ADDR 0xc0000000
#define MX27_CS1_BASE_ADDR 0xc8000000
#define MX27_CS2_BASE_ADDR 0xd0000000
#define MX27_CS3_BASE_ADDR 0xd2000000
#define MX27_CS4_BASE_ADDR 0xd4000000
#define MX27_CS5_BASE_ADDR 0xd6000000
/* NAND, SDRAM, WEIM, M3IF, EMI controllers */
#define MX27_X_MEMC_BASE_ADDR 0xd8000000 #define MX27_X_MEMC_BASE_ADDR 0xd8000000
#define MX27_X_MEMC_SIZE SZ_1M #define MX27_X_MEMC_SIZE SZ_1M
#define MX27_NFC_BASE_ADDR (MX27_X_MEMC_BASE_ADDR)
#define MX27_SDRAMC_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x1000)
#define MX27_WEIM_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x2000)
#define MX27_M3IF_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x3000)
#define MX27_PCMCIA_CTL_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x4000)
#define MX27_WEIM_CSCRx_BASE_ADDR(cs) (MX27_WEIM_BASE_ADDR + (cs) * 0x10)
#define MX27_WEIM_CSCRxU(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs))
#define MX27_WEIM_CSCRxL(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
#define MX27_WEIM_CSCRxA(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
#define MX27_PCMCIA_MEM_BASE_ADDR 0xdc000000
/* IRAM */
#define MX27_IRAM_BASE_ADDR 0xffff4c00 /* internal ram */
#define MX27_IO_P2V(x) IMX_IO_P2V(x) #define MX27_IO_P2V(x) IMX_IO_P2V(x)
#define MX27_IO_ADDRESS(x) IOMEM(MX27_IO_P2V(x))
/* fixed interrupt numbers */
#include <asm/irq.h>
#define MX27_INT_I2C2 (NR_IRQS_LEGACY + 1)
#define MX27_INT_GPT6 (NR_IRQS_LEGACY + 2)
#define MX27_INT_GPT5 (NR_IRQS_LEGACY + 3)
#define MX27_INT_GPT4 (NR_IRQS_LEGACY + 4)
#define MX27_INT_RTIC (NR_IRQS_LEGACY + 5)
#define MX27_INT_CSPI3 (NR_IRQS_LEGACY + 6)
#define MX27_INT_MSHC (NR_IRQS_LEGACY + 7)
#define MX27_INT_GPIO (NR_IRQS_LEGACY + 8)
#define MX27_INT_SDHC3 (NR_IRQS_LEGACY + 9)
#define MX27_INT_SDHC2 (NR_IRQS_LEGACY + 10)
#define MX27_INT_SDHC1 (NR_IRQS_LEGACY + 11)
#define MX27_INT_I2C1 (NR_IRQS_LEGACY + 12)
#define MX27_INT_SSI2 (NR_IRQS_LEGACY + 13)
#define MX27_INT_SSI1 (NR_IRQS_LEGACY + 14)
#define MX27_INT_CSPI2 (NR_IRQS_LEGACY + 15)
#define MX27_INT_CSPI1 (NR_IRQS_LEGACY + 16)
#define MX27_INT_UART4 (NR_IRQS_LEGACY + 17)
#define MX27_INT_UART3 (NR_IRQS_LEGACY + 18)
#define MX27_INT_UART2 (NR_IRQS_LEGACY + 19)
#define MX27_INT_UART1 (NR_IRQS_LEGACY + 20)
#define MX27_INT_KPP (NR_IRQS_LEGACY + 21)
#define MX27_INT_RTC (NR_IRQS_LEGACY + 22)
#define MX27_INT_PWM (NR_IRQS_LEGACY + 23)
#define MX27_INT_GPT3 (NR_IRQS_LEGACY + 24)
#define MX27_INT_GPT2 (NR_IRQS_LEGACY + 25)
#define MX27_INT_GPT1 (NR_IRQS_LEGACY + 26)
#define MX27_INT_WDOG (NR_IRQS_LEGACY + 27)
#define MX27_INT_PCMCIA (NR_IRQS_LEGACY + 28)
#define MX27_INT_NFC (NR_IRQS_LEGACY + 29)
#define MX27_INT_ATA (NR_IRQS_LEGACY + 30)
#define MX27_INT_CSI (NR_IRQS_LEGACY + 31)
#define MX27_INT_DMACH0 (NR_IRQS_LEGACY + 32)
#define MX27_INT_DMACH1 (NR_IRQS_LEGACY + 33)
#define MX27_INT_DMACH2 (NR_IRQS_LEGACY + 34)
#define MX27_INT_DMACH3 (NR_IRQS_LEGACY + 35)
#define MX27_INT_DMACH4 (NR_IRQS_LEGACY + 36)
#define MX27_INT_DMACH5 (NR_IRQS_LEGACY + 37)
#define MX27_INT_DMACH6 (NR_IRQS_LEGACY + 38)
#define MX27_INT_DMACH7 (NR_IRQS_LEGACY + 39)
#define MX27_INT_DMACH8 (NR_IRQS_LEGACY + 40)
#define MX27_INT_DMACH9 (NR_IRQS_LEGACY + 41)
#define MX27_INT_DMACH10 (NR_IRQS_LEGACY + 42)
#define MX27_INT_DMACH11 (NR_IRQS_LEGACY + 43)
#define MX27_INT_DMACH12 (NR_IRQS_LEGACY + 44)
#define MX27_INT_DMACH13 (NR_IRQS_LEGACY + 45)
#define MX27_INT_DMACH14 (NR_IRQS_LEGACY + 46)
#define MX27_INT_DMACH15 (NR_IRQS_LEGACY + 47)
#define MX27_INT_UART6 (NR_IRQS_LEGACY + 48)
#define MX27_INT_UART5 (NR_IRQS_LEGACY + 49)
#define MX27_INT_FEC (NR_IRQS_LEGACY + 50)
#define MX27_INT_EMMAPRP (NR_IRQS_LEGACY + 51)
#define MX27_INT_EMMAPP (NR_IRQS_LEGACY + 52)
#define MX27_INT_VPU (NR_IRQS_LEGACY + 53)
#define MX27_INT_USB_HS1 (NR_IRQS_LEGACY + 54)
#define MX27_INT_USB_HS2 (NR_IRQS_LEGACY + 55)
#define MX27_INT_USB_OTG (NR_IRQS_LEGACY + 56)
#define MX27_INT_SCC_SMN (NR_IRQS_LEGACY + 57)
#define MX27_INT_SCC_SCM (NR_IRQS_LEGACY + 58)
#define MX27_INT_SAHARA (NR_IRQS_LEGACY + 59)
#define MX27_INT_SLCDC (NR_IRQS_LEGACY + 60)
#define MX27_INT_LCDC (NR_IRQS_LEGACY + 61)
#define MX27_INT_IIM (NR_IRQS_LEGACY + 62)
#define MX27_INT_CCM (NR_IRQS_LEGACY + 63)
/* fixed DMA request numbers */
#define MX27_DMA_REQ_CSPI3_RX 1
#define MX27_DMA_REQ_CSPI3_TX 2
#define MX27_DMA_REQ_EXT 3
#define MX27_DMA_REQ_MSHC 4
#define MX27_DMA_REQ_SDHC2 6
#define MX27_DMA_REQ_SDHC1 7
#define MX27_DMA_REQ_SSI2_RX0 8
#define MX27_DMA_REQ_SSI2_TX0 9
#define MX27_DMA_REQ_SSI2_RX1 10
#define MX27_DMA_REQ_SSI2_TX1 11
#define MX27_DMA_REQ_SSI1_RX0 12
#define MX27_DMA_REQ_SSI1_TX0 13
#define MX27_DMA_REQ_SSI1_RX1 14
#define MX27_DMA_REQ_SSI1_TX1 15
#define MX27_DMA_REQ_CSPI2_RX 16
#define MX27_DMA_REQ_CSPI2_TX 17
#define MX27_DMA_REQ_CSPI1_RX 18
#define MX27_DMA_REQ_CSPI1_TX 19
#define MX27_DMA_REQ_UART4_RX 20
#define MX27_DMA_REQ_UART4_TX 21
#define MX27_DMA_REQ_UART3_RX 22
#define MX27_DMA_REQ_UART3_TX 23
#define MX27_DMA_REQ_UART2_RX 24
#define MX27_DMA_REQ_UART2_TX 25
#define MX27_DMA_REQ_UART1_RX 26
#define MX27_DMA_REQ_UART1_TX 27
#define MX27_DMA_REQ_ATA_TX 28
#define MX27_DMA_REQ_ATA_RCV 29
#define MX27_DMA_REQ_CSI_STAT 30
#define MX27_DMA_REQ_CSI_RX 31
#define MX27_DMA_REQ_UART5_TX 32
#define MX27_DMA_REQ_UART5_RX 33
#define MX27_DMA_REQ_UART6_TX 34
#define MX27_DMA_REQ_UART6_RX 35
#define MX27_DMA_REQ_SDHC3 36
#define MX27_DMA_REQ_NFC 37
#endif /* ifndef __MACH_MX27_H__ */ #endif /* ifndef __MACH_MX27_H__ */
arch/arm/mach-imx/mx31.h
View file @ accdab6d
...@@ -2,196 +2,17 @@ ...@@ -2,196 +2,17 @@
#ifndef __MACH_MX31_H__ #ifndef __MACH_MX31_H__
#define __MACH_MX31_H__ #define __MACH_MX31_H__
/*
* IRAM
*/
#define MX31_IRAM_BASE_ADDR 0x1ffc0000 /* internal ram */
#define MX31_IRAM_SIZE SZ_16K
#define MX31_L2CC_BASE_ADDR 0x30000000
#define MX31_L2CC_SIZE SZ_1M
#define MX31_AIPS1_BASE_ADDR 0x43f00000 #define MX31_AIPS1_BASE_ADDR 0x43f00000
#define MX31_AIPS1_SIZE SZ_1M #define MX31_AIPS1_SIZE SZ_1M
#define MX31_MAX_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x04000)
#define MX31_EVTMON_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x08000)
#define MX31_CLKCTL_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x0c000)
#define MX31_ETB_SLOT4_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x10000)
#define MX31_ETB_SLOT5_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x14000)
#define MX31_ECT_CTIO_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x18000)
#define MX31_I2C1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x80000)
#define MX31_I2C3_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x84000)
#define MX31_USB_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000)
#define MX31_USB_OTG_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0000)
#define MX31_USB_HS1_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0200)
#define MX31_USB_HS2_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0400)
#define MX31_ATA_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x8c000)
#define MX31_UART1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x90000)
#define MX31_UART2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x94000)
#define MX31_I2C2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x98000)
#define MX31_OWIRE_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x9c000)
#define MX31_SSI1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa0000)
#define MX31_CSPI1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa4000)
#define MX31_KPP_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa8000)
#define MX31_IOMUXC_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xac000)
#define MX31_UART4_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb0000)
#define MX31_UART5_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb4000)
#define MX31_ECT_IP1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb8000)
#define MX31_ECT_IP2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xbc000)
#define MX31_SPBA0_BASE_ADDR 0x50000000 #define MX31_SPBA0_BASE_ADDR 0x50000000
#define MX31_SPBA0_SIZE SZ_1M #define MX31_SPBA0_SIZE SZ_1M
#define MX31_SDHC1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x04000)
#define MX31_SDHC2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x08000)
#define MX31_UART3_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x0c000)
#define MX31_CSPI2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x10000)
#define MX31_SSI2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x14000)
#define MX31_SIM1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x18000)
#define MX31_IIM_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x1c000)
#define MX31_ATA_DMA_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x20000)
#define MX31_MSHC1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x24000)
#define MX31_SPBA_CTRL_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x3c000)
#define MX31_AIPS2_BASE_ADDR 0x53f00000 #define MX31_AIPS2_BASE_ADDR 0x53f00000
#define MX31_AIPS2_SIZE SZ_1M #define MX31_AIPS2_SIZE SZ_1M
#define MX31_CCM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x80000)
#define MX31_CSPI3_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x84000)
#define MX31_FIRI_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x8c000)
#define MX31_GPT1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x90000)
#define MX31_EPIT1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x94000)
#define MX31_EPIT2_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x98000)
#define MX31_GPIO3_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xa4000)
#define MX31_SCC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xac000)
#define MX31_SCM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xae000)
#define MX31_SMN_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xaf000)
#define MX31_RNGA_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xb0000)
#define MX31_IPU_CTRL_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc0000)
#define MX31_AUDMUX_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc4000)
#define MX31_MPEG4_ENC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc8000)
#define MX31_GPIO1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xcc000)
#define MX31_GPIO2_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd0000)
#define MX31_SDMA_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd4000)
#define MX31_RTC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd8000)
#define MX31_WDOG_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xdc000)
#define MX31_PWM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xe0000)
#define MX31_RTIC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xec000)
#define MX31_ROMP_BASE_ADDR 0x60000000
#define MX31_ROMP_BASE_ADDR_VIRT IOMEM(0xfc500000)
#define MX31_ROMP_SIZE SZ_1M
#define MX31_AVIC_BASE_ADDR 0x68000000 #define MX31_AVIC_BASE_ADDR 0x68000000
#define MX31_AVIC_SIZE SZ_1M #define MX31_AVIC_SIZE SZ_1M
#define MX31_IPU_MEM_BASE_ADDR 0x70000000
#define MX31_CSD0_BASE_ADDR 0x80000000
#define MX31_CSD1_BASE_ADDR 0x90000000
#define MX31_CS0_BASE_ADDR 0xa0000000
#define MX31_CS1_BASE_ADDR 0xa8000000
#define MX31_CS2_BASE_ADDR 0xb0000000
#define MX31_CS3_BASE_ADDR 0xb2000000
#define MX31_CS4_BASE_ADDR 0xb4000000
#define MX31_CS4_BASE_ADDR_VIRT IOMEM(0xf6000000)
#define MX31_CS4_SIZE SZ_32M
#define MX31_CS5_BASE_ADDR 0xb6000000
#define MX31_CS5_BASE_ADDR_VIRT IOMEM(0xf8000000)
#define MX31_CS5_SIZE SZ_32M
#define MX31_X_MEMC_BASE_ADDR 0xb8000000 #define MX31_X_MEMC_BASE_ADDR 0xb8000000
#define MX31_X_MEMC_SIZE SZ_64K #define MX31_X_MEMC_SIZE SZ_64K
#define MX31_NFC_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x0000)
#define MX31_ESDCTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x1000)
#define MX31_WEIM_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x2000)
#define MX31_M3IF_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x3000)
#define MX31_EMI_CTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x4000)
#define MX31_PCMCIA_CTL_BASE_ADDR MX31_EMI_CTL_BASE_ADDR
#define MX31_WEIM_CSCRx_BASE_ADDR(cs) (MX31_WEIM_BASE_ADDR + (cs) * 0x10)
#define MX31_WEIM_CSCRxU(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs))
#define MX31_WEIM_CSCRxL(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
#define MX31_WEIM_CSCRxA(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
#define MX31_PCMCIA_MEM_BASE_ADDR 0xbc000000
#define MX31_IO_P2V(x) IMX_IO_P2V(x) #define MX31_IO_P2V(x) IMX_IO_P2V(x)
#define MX31_IO_ADDRESS(x) IOMEM(MX31_IO_P2V(x))
/*
* Interrupt numbers
*/
#include <asm/irq.h>
#define MX31_INT_I2C3 (NR_IRQS_LEGACY + 3)
#define MX31_INT_I2C2 (NR_IRQS_LEGACY + 4)
#define MX31_INT_MPEG4_ENCODER (NR_IRQS_LEGACY + 5)
#define MX31_INT_RTIC (NR_IRQS_LEGACY + 6)
#define MX31_INT_FIRI (NR_IRQS_LEGACY + 7)
#define MX31_INT_SDHC2 (NR_IRQS_LEGACY + 8)
#define MX31_INT_SDHC1 (NR_IRQS_LEGACY + 9)
#define MX31_INT_I2C1 (NR_IRQS_LEGACY + 10)
#define MX31_INT_SSI2 (NR_IRQS_LEGACY + 11)
#define MX31_INT_SSI1 (NR_IRQS_LEGACY + 12)
#define MX31_INT_CSPI2 (NR_IRQS_LEGACY + 13)
#define MX31_INT_CSPI1 (NR_IRQS_LEGACY + 14)
#define MX31_INT_ATA (NR_IRQS_LEGACY + 15)
#define MX31_INT_MBX (NR_IRQS_LEGACY + 16)
#define MX31_INT_CSPI3 (NR_IRQS_LEGACY + 17)
#define MX31_INT_UART3 (NR_IRQS_LEGACY + 18)
#define MX31_INT_IIM (NR_IRQS_LEGACY + 19)
#define MX31_INT_SIM2 (NR_IRQS_LEGACY + 20)
#define MX31_INT_SIM1 (NR_IRQS_LEGACY + 21)
#define MX31_INT_RNGA (NR_IRQS_LEGACY + 22)
#define MX31_INT_EVTMON (NR_IRQS_LEGACY + 23)
#define MX31_INT_KPP (NR_IRQS_LEGACY + 24)
#define MX31_INT_RTC (NR_IRQS_LEGACY + 25)
#define MX31_INT_PWM (NR_IRQS_LEGACY + 26)
#define MX31_INT_EPIT2 (NR_IRQS_LEGACY + 27)
#define MX31_INT_EPIT1 (NR_IRQS_LEGACY + 28)
#define MX31_INT_GPT (NR_IRQS_LEGACY + 29)
#define MX31_INT_POWER_FAIL (NR_IRQS_LEGACY + 30)
#define MX31_INT_CCM_DVFS (NR_IRQS_LEGACY + 31)
#define MX31_INT_UART2 (NR_IRQS_LEGACY + 32)
#define MX31_INT_NFC (NR_IRQS_LEGACY + 33)
#define MX31_INT_SDMA (NR_IRQS_LEGACY + 34)
#define MX31_INT_USB_HS1 (NR_IRQS_LEGACY + 35)
#define MX31_INT_USB_HS2 (NR_IRQS_LEGACY + 36)
#define MX31_INT_USB_OTG (NR_IRQS_LEGACY + 37)
#define MX31_INT_MSHC1 (NR_IRQS_LEGACY + 39)
#define MX31_INT_MSHC2 (NR_IRQS_LEGACY + 40)
#define MX31_INT_IPU_ERR (NR_IRQS_LEGACY + 41)
#define MX31_INT_IPU_SYN (NR_IRQS_LEGACY + 42)
#define MX31_INT_UART1 (NR_IRQS_LEGACY + 45)
#define MX31_INT_UART4 (NR_IRQS_LEGACY + 46)
#define MX31_INT_UART5 (NR_IRQS_LEGACY + 47)
#define MX31_INT_ECT (NR_IRQS_LEGACY + 48)
#define MX31_INT_SCC_SCM (NR_IRQS_LEGACY + 49)
#define MX31_INT_SCC_SMN (NR_IRQS_LEGACY + 50)
#define MX31_INT_GPIO2 (NR_IRQS_LEGACY + 51)
#define MX31_INT_GPIO1 (NR_IRQS_LEGACY + 52)
#define MX31_INT_CCM (NR_IRQS_LEGACY + 53)
#define MX31_INT_PCMCIA (NR_IRQS_LEGACY + 54)
#define MX31_INT_WDOG (NR_IRQS_LEGACY + 55)
#define MX31_INT_GPIO3 (NR_IRQS_LEGACY + 56)
#define MX31_INT_EXT_POWER (NR_IRQS_LEGACY + 58)
#define MX31_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59)
#define MX31_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60)
#define MX31_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61)
#define MX31_INT_EXT_WDOG (NR_IRQS_LEGACY + 62)
#define MX31_INT_EXT_TV (NR_IRQS_LEGACY + 63)
#define MX31_DMA_REQ_SDHC1 20
#define MX31_DMA_REQ_SDHC2 21
#define MX31_DMA_REQ_SSI2_RX1 22
#define MX31_DMA_REQ_SSI2_TX1 23
#define MX31_DMA_REQ_SSI2_RX0 24
#define MX31_DMA_REQ_SSI2_TX0 25
#define MX31_DMA_REQ_SSI1_RX1 26
#define MX31_DMA_REQ_SSI1_TX1 27
#define MX31_DMA_REQ_SSI1_RX0 28
#define MX31_DMA_REQ_SSI1_TX0 29
#define MX31_PROD_SIGNATURE 0x1 /* For MX31 */
#endif /* ifndef __MACH_MX31_H__ */ #endif /* ifndef __MACH_MX31_H__ */
arch/arm/mach-imx/mx31lilly-db.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* LILLY-1131 development board support
*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
*
* based on code for other MX31 boards,
*
* Copyright 2005-2007 Freescale Semiconductor
* Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
* Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "board-mx31lilly.h"
#include "common.h"
#include "devices-imx31.h"
#include "hardware.h"
#include "iomux-mx3.h"
/*
* This file contains board-specific initialization routines for the
* LILLY-1131 development board. If you design an own baseboard for the
* module, use this file as base for support code.
*/
static unsigned int lilly_db_board_pins[] __initdata = {
MX31_PIN_SD1_DATA3__SD1_DATA3,
MX31_PIN_SD1_DATA2__SD1_DATA2,
MX31_PIN_SD1_DATA1__SD1_DATA1,
MX31_PIN_SD1_DATA0__SD1_DATA0,
MX31_PIN_SD1_CLK__SD1_CLK,
MX31_PIN_SD1_CMD__SD1_CMD,
MX31_PIN_LD0__LD0,
MX31_PIN_LD1__LD1,
MX31_PIN_LD2__LD2,
MX31_PIN_LD3__LD3,
MX31_PIN_LD4__LD4,
MX31_PIN_LD5__LD5,
MX31_PIN_LD6__LD6,
MX31_PIN_LD7__LD7,
MX31_PIN_LD8__LD8,
MX31_PIN_LD9__LD9,
MX31_PIN_LD10__LD10,
MX31_PIN_LD11__LD11,
MX31_PIN_LD12__LD12,
MX31_PIN_LD13__LD13,
MX31_PIN_LD14__LD14,
MX31_PIN_LD15__LD15,
MX31_PIN_LD16__LD16,
MX31_PIN_LD17__LD17,
MX31_PIN_VSYNC3__VSYNC3,
MX31_PIN_HSYNC__HSYNC,
MX31_PIN_FPSHIFT__FPSHIFT,
MX31_PIN_DRDY0__DRDY0,
MX31_PIN_CONTRAST__CONTRAST,
};
/* MMC support */
static int mxc_mmc1_get_ro(struct device *dev)
{
return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
}
static int gpio_det, gpio_wp;
#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
static int mxc_mmc1_init(struct device *dev,
irq_handler_t detect_irq, void *data)
{
int ret;
gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1);
gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0);
mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
ret = gpio_request(gpio_det, "MMC detect");
if (ret)
return ret;
ret = gpio_request(gpio_wp, "MMC w/p");
if (ret)
goto exit_free_det;
gpio_direction_input(gpio_det);
gpio_direction_input(gpio_wp);
ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)),
detect_irq, IRQF_TRIGGER_FALLING,
"MMC detect", data);
if (ret)
goto exit_free_wp;
return 0;
exit_free_wp:
gpio_free(gpio_wp);
exit_free_det:
gpio_free(gpio_det);
return ret;
}
static void mxc_mmc1_exit(struct device *dev, void *data)
{
gpio_free(gpio_det);
gpio_free(gpio_wp);
free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)), data);
}
static const struct imxmmc_platform_data mmc_pdata __initconst = {
.get_ro = mxc_mmc1_get_ro,
.init = mxc_mmc1_init,
.exit = mxc_mmc1_exit,
};
/* Framebuffer support */
static const struct fb_videomode fb_modedb = {
/* 640x480 TFT panel (IPS-056T) */
.name = "CRT-VGA",
.refresh = 64,
.xres = 640,
.yres = 480,
.pixclock = 30000,
.left_margin = 200,
.right_margin = 2,
.upper_margin = 2,
.lower_margin = 2,
.hsync_len = 3,
.vsync_len = 1,
.sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
};
static struct mx3fb_platform_data fb_pdata __initdata = {
.name = "CRT-VGA",
.mode = &fb_modedb,
.num_modes = 1,
};
#define LCD_VCC_EN_GPIO (7)
static void __init mx31lilly_init_fb(void)
{
if (gpio_request(LCD_VCC_EN_GPIO, "LCD enable") != 0) {
printk(KERN_WARNING "unable to request LCD_VCC_EN pin.\n");
return;
}
imx31_add_ipu_core();
imx31_add_mx3_sdc_fb(&fb_pdata);
gpio_direction_output(LCD_VCC_EN_GPIO, 1);
}
void __init mx31lilly_db_init(void)
{
mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
ARRAY_SIZE(lilly_db_board_pins),
"development board pins");
imx31_add_mxc_mmc(0, &mmc_pdata);
mx31lilly_init_fb();
}
arch/arm/mach-imx/mx31lite-db.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* LogicPD i.MX31 SOM-LV development board support
*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
*
* based on code for other MX31 boards,
*
* Copyright 2005-2007 Freescale Semiconductor
* Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
* Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "board-mx31lite.h"
#include "common.h"
#include "devices-imx31.h"
#include "hardware.h"
#include "iomux-mx3.h"
/*
* This file contains board-specific initialization routines for the
* LogicPD i.MX31 SOM-LV development board, aka 'LiteKit'.
* If you design an own baseboard for the module, use this file as base
* for support code.
*/
static unsigned int litekit_db_board_pins[] __initdata = {
/* SDHC1 */
MX31_PIN_SD1_DATA0__SD1_DATA0,
MX31_PIN_SD1_DATA1__SD1_DATA1,
MX31_PIN_SD1_DATA2__SD1_DATA2,
MX31_PIN_SD1_DATA3__SD1_DATA3,
MX31_PIN_SD1_CLK__SD1_CLK,
MX31_PIN_SD1_CMD__SD1_CMD,
};
/* MMC */
static int gpio_det, gpio_wp;
#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS)
static int mxc_mmc1_get_ro(struct device *dev)
{
return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_GPIO1_6));
}
static int mxc_mmc1_init(struct device *dev,
irq_handler_t detect_irq, void *data)
{
int ret;
gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1);
gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6);
mxc_iomux_set_pad(MX31_PIN_SD1_DATA0,
MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX31_PIN_SD1_DATA1,
MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX31_PIN_SD1_DATA2,
MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX31_PIN_SD1_DATA3,
MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX31_PIN_SD1_CMD,
MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
ret = gpio_request(gpio_det, "MMC detect");
if (ret)
return ret;
ret = gpio_request(gpio_wp, "MMC w/p");
if (ret)
goto exit_free_det;
gpio_direction_input(gpio_det);
gpio_direction_input(gpio_wp);
ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)),
detect_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC detect", data);
if (ret)
goto exit_free_wp;
return 0;
exit_free_wp:
gpio_free(gpio_wp);
exit_free_det:
gpio_free(gpio_det);
return ret;
}
static void mxc_mmc1_exit(struct device *dev, void *data)
{
gpio_free(gpio_det);
gpio_free(gpio_wp);
free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)), data);
}
static const struct imxmmc_platform_data mmc_pdata __initconst = {
.get_ro = mxc_mmc1_get_ro,
.init = mxc_mmc1_init,
.exit = mxc_mmc1_exit,
};
/* GPIO LEDs */
static const struct gpio_led litekit_leds[] __initconst = {
{
.name = "GPIO0",
.gpio = IOMUX_TO_GPIO(MX31_PIN_COMPARE),
.active_low = 1,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
{
.name = "GPIO1",
.gpio = IOMUX_TO_GPIO(MX31_PIN_CAPTURE),
.active_low = 1,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
}
};
static const struct gpio_led_platform_data
litekit_led_platform_data __initconst = {
.leds = litekit_leds,
.num_leds = ARRAY_SIZE(litekit_leds),
};
void __init mx31lite_db_init(void)
{
mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
ARRAY_SIZE(litekit_db_board_pins),
"development board pins");
imx31_add_mxc_mmc(0, &mmc_pdata);
gpio_led_register_device(-1, &litekit_led_platform_data);
imx31_add_imx2_wdt();
imx31_add_mxc_rtc();
}
arch/arm/mach-imx/mx31moboard-devboard.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
*/
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/usb/otg.h>
#include "board-mx31moboard.h"
#include "common.h"
#include "devices-imx31.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
static unsigned int devboard_pins[] = {
/* UART1 */
MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
/* SDHC2 */
MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
/* USB H1 */
MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
/* SEL */
MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
};
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
static int devboard_sdhc2_get_ro(struct device *dev)
{
return !gpio_get_value(SDHC2_WP);
}
static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
int ret;
ret = gpio_request(SDHC2_CD, "sdhc-detect");
if (ret)
return ret;
gpio_direction_input(SDHC2_CD);
ret = gpio_request(SDHC2_WP, "sdhc-wp");
if (ret)
goto err_gpio_free;
gpio_direction_input(SDHC2_WP);
ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"sdhc2-card-detect", data);
if (ret)
goto err_gpio_free_2;
return 0;
err_gpio_free_2:
gpio_free(SDHC2_WP);
err_gpio_free:
gpio_free(SDHC2_CD);
return ret;
}
static void devboard_sdhc2_exit(struct device *dev, void *data)
{
free_irq(gpio_to_irq(SDHC2_CD), data);
gpio_free(SDHC2_WP);
gpio_free(SDHC2_CD);
}
static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
.get_ro = devboard_sdhc2_get_ro,
.init = devboard_sdhc2_init,
.exit = devboard_sdhc2_exit,
};
#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
static void devboard_init_sel_gpios(void)
{
if (!gpio_request(SEL0, "sel0")) {
gpio_direction_input(SEL0);
gpio_export(SEL0, true);
}
if (!gpio_request(SEL1, "sel1")) {
gpio_direction_input(SEL1);
gpio_export(SEL1, true);
}
if (!gpio_request(SEL2, "sel2")) {
gpio_direction_input(SEL2);
gpio_export(SEL2, true);
}
if (!gpio_request(SEL3, "sel3")) {
gpio_direction_input(SEL3);
gpio_export(SEL3, true);
}
}
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
static int devboard_usbh1_hw_init(struct platform_device *pdev)
{
mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
mdelay(10);
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
MXC_EHCI_INTERFACE_SINGLE_UNI);
}
#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
#define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE)
static int devboard_isp1105_init(struct usb_phy *otg)
{
int ret = gpio_request(USBH1_MODE, "usbh1-mode");
if (ret)
return ret;
/* single ended */
gpio_direction_output(USBH1_MODE, 0);
ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
if (ret) {
gpio_free(USBH1_MODE);
return ret;
}
gpio_direction_output(USBH1_VBUSEN_B, 1);
return 0;
}
static int devboard_isp1105_set_vbus(struct usb_otg *otg, bool on)
{
if (on)
gpio_set_value(USBH1_VBUSEN_B, 0);
else
gpio_set_value(USBH1_VBUSEN_B, 1);
return 0;
}
static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
.init = devboard_usbh1_hw_init,
.portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
};
static int __init devboard_usbh1_init(void)
{
struct usb_phy *phy;
struct platform_device *pdev;
phy = kzalloc(sizeof(*phy), GFP_KERNEL);
if (!phy)
return -ENOMEM;
phy->otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
if (!phy->otg) {
kfree(phy);
return -ENOMEM;
}
phy->label = "ISP1105";
phy->init = devboard_isp1105_init;
phy->otg->set_vbus = devboard_isp1105_set_vbus;
usbh1_pdata.otg = phy;
pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
return PTR_ERR_OR_ZERO(pdev);
}
static const struct fsl_usb2_platform_data usb_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
};
/*
* system init for baseboard usage. Will be called by mx31moboard init.
*/
void __init mx31moboard_devboard_init(void)
{
printk(KERN_INFO "Initializing mx31devboard peripherals\n");
mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins),
"devboard");
imx31_add_imx_uart1(&uart_pdata);
imx31_add_mxc_mmc(1, &sdhc2_pdata);
devboard_init_sel_gpios();
imx31_add_fsl_usb2_udc(&usb_pdata);
devboard_usbh1_init();
}
arch/arm/mach-imx/mx31moboard-marxbot.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
*/
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/types.h>
#include <linux/usb/otg.h>
#include "board-mx31moboard.h"
#include "common.h"
#include "devices-imx31.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
static unsigned int marxbot_pins[] = {
/* SDHC2 */
MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
/* dsPIC resets */
MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22,
/*battery detection */
MX31_PIN_LCS0__GPIO3_23,
/* USB H1 */
MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
/* SEL */
MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
};
#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
static int marxbot_sdhc2_get_ro(struct device *dev)
{
return !gpio_get_value(SDHC2_WP);
}
static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
int ret;
ret = gpio_request(SDHC2_CD, "sdhc-detect");
if (ret)
return ret;
gpio_direction_input(SDHC2_CD);
ret = gpio_request(SDHC2_WP, "sdhc-wp");
if (ret)
goto err_gpio_free;
gpio_direction_input(SDHC2_WP);
ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"sdhc2-card-detect", data);
if (ret)
goto err_gpio_free_2;
return 0;
err_gpio_free_2:
gpio_free(SDHC2_WP);
err_gpio_free:
gpio_free(SDHC2_CD);
return ret;
}
static void marxbot_sdhc2_exit(struct device *dev, void *data)
{
free_irq(gpio_to_irq(SDHC2_CD), data);
gpio_free(SDHC2_WP);
gpio_free(SDHC2_CD);
}
static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
.get_ro = marxbot_sdhc2_get_ro,
.init = marxbot_sdhc2_init,
.exit = marxbot_sdhc2_exit,
};
#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_STXD5)
#define DSPICS_RST_B IOMUX_TO_GPIO(MX31_PIN_SRXD5)
static void dspics_resets_init(void)
{
if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
gpio_direction_output(TRSLAT_RST_B, 0);
gpio_export(TRSLAT_RST_B, false);
}
if (!gpio_request(DSPICS_RST_B, "dspics-rst")) {
gpio_direction_output(DSPICS_RST_B, 0);
gpio_export(DSPICS_RST_B, false);
}
}
static struct spi_board_info marxbot_spi_board_info[] __initdata = {
{
.modalias = "spidev",
.max_speed_hz = 300000,
.bus_num = 1,
.chip_select = 1, /* according spi1_cs[] ! */
},
};
#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
static void marxbot_init_sel_gpios(void)
{
if (!gpio_request(SEL0, "sel0")) {
gpio_direction_input(SEL0);
gpio_export(SEL0, true);
}
if (!gpio_request(SEL1, "sel1")) {
gpio_direction_input(SEL1);
gpio_export(SEL1, true);
}
if (!gpio_request(SEL2, "sel2")) {
gpio_direction_input(SEL2);
gpio_export(SEL2, true);
}
if (!gpio_request(SEL3, "sel3")) {
gpio_direction_input(SEL3);
gpio_export(SEL3, true);
}
}
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
static int marxbot_usbh1_hw_init(struct platform_device *pdev)
{
mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
mdelay(10);
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
MXC_EHCI_INTERFACE_SINGLE_UNI);
}
#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
#define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE)
static int marxbot_isp1105_init(struct usb_phy *otg)
{
int ret = gpio_request(USBH1_MODE, "usbh1-mode");
if (ret)
return ret;
/* single ended */
gpio_direction_output(USBH1_MODE, 0);
ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
if (ret) {
gpio_free(USBH1_MODE);
return ret;
}
gpio_direction_output(USBH1_VBUSEN_B, 1);
return 0;
}
static int marxbot_isp1105_set_vbus(struct usb_otg *otg, bool on)
{
if (on)
gpio_set_value(USBH1_VBUSEN_B, 0);
else
gpio_set_value(USBH1_VBUSEN_B, 1);
return 0;
}
static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
.init = marxbot_usbh1_hw_init,
.portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
};
static int __init marxbot_usbh1_init(void)
{
struct usb_phy *phy;
struct platform_device *pdev;
phy = kzalloc(sizeof(*phy), GFP_KERNEL);
if (!phy)
return -ENOMEM;
phy->otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
if (!phy->otg) {
kfree(phy);
return -ENOMEM;
}
phy->label = "ISP1105";
phy->init = marxbot_isp1105_init;
phy->otg->set_vbus = marxbot_isp1105_set_vbus;
usbh1_pdata.otg = phy;
pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
return PTR_ERR_OR_ZERO(pdev);
}
static const struct fsl_usb2_platform_data usb_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
};
/*
* system init for baseboard usage. Will be called by mx31moboard init.
*/
void __init mx31moboard_marxbot_init(void)
{
printk(KERN_INFO "Initializing mx31marxbot peripherals\n");
mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
"marxbot");
marxbot_init_sel_gpios();
dspics_resets_init();
imx31_add_mxc_mmc(1, &sdhc2_pdata);
spi_register_board_info(marxbot_spi_board_info,
ARRAY_SIZE(marxbot_spi_board_info));
/* battery present pin */
gpio_request(IOMUX_TO_GPIO(MX31_PIN_LCS0), "bat-present");
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0));
gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false);
imx31_add_fsl_usb2_udc(&usb_pdata);
marxbot_usbh1_init();
}
arch/arm/mach-imx/mx31moboard-smartbot.c deleted 100644 → 0
View file @ a4f07008
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
*/
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/types.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include "board-mx31moboard.h"
#include "common.h"
#include "devices-imx31.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
static unsigned int smartbot_pins[] = {
/* UART1 */
MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
/* ENABLES */
MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
};
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static const struct fsl_usb2_platform_data usb_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
};
#if defined(CONFIG_USB_ULPI)
static int smartbot_otg_init(struct platform_device *pdev)
{
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
static struct mxc_usbh_platform_data otg_host_pdata __initdata = {
.init = smartbot_otg_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
};
static int __init smartbot_otg_host_init(void)
{
struct platform_device *pdev;
otg_host_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT);
if (!otg_host_pdata.otg)
return -ENODEV;
pdev = imx31_add_mxc_ehci_otg(&otg_host_pdata);
return PTR_ERR_OR_ZERO(pdev);
}
#else
static inline int smartbot_otg_host_init(void) { return 0; }
#endif
#define POWER_EN IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
#define DSPIC_RST_B IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
#define TRSLAT_SRC_CHOICE IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
static void smartbot_resets_init(void)
{
if (!gpio_request(POWER_EN, "power-enable")) {
gpio_direction_output(POWER_EN, 0);
gpio_export(POWER_EN, false);
}
if (!gpio_request(DSPIC_RST_B, "dspic-rst")) {
gpio_direction_output(DSPIC_RST_B, 0);
gpio_export(DSPIC_RST_B, false);
}
if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
gpio_direction_output(TRSLAT_RST_B, 0);
gpio_export(TRSLAT_RST_B, false);
}
if (!gpio_request(TRSLAT_SRC_CHOICE, "translator-src-choice")) {
gpio_direction_output(TRSLAT_SRC_CHOICE, 0);
gpio_export(TRSLAT_SRC_CHOICE, false);
}
}
/*
* system init for baseboard usage. Will be called by mx31moboard init.
*/
void __init mx31moboard_smartbot_init(int board)
{
printk(KERN_INFO "Initializing mx31smartbot peripherals\n");
mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins),
"smartbot");
imx31_add_imx_uart1(&uart_pdata);
switch (board) {
case MX31SMARTBOT:
imx31_add_fsl_usb2_udc(&usb_pdata);
break;
case MX31EYEBOT:
smartbot_otg_host_init();
break;
default:
printk(KERN_WARNING "Unknown board %d, USB OTG not initialized",
board);
}
smartbot_resets_init();
}
arch/arm/mach-imx/mx35.h
View file @ accdab6d
...@@ -2,190 +2,17 @@ ...@@ -2,190 +2,17 @@
#ifndef __MACH_MX35_H__ #ifndef __MACH_MX35_H__
#define __MACH_MX35_H__ #define __MACH_MX35_H__
/*
* IRAM
*/
#define MX35_IRAM_BASE_ADDR 0x10000000 /* internal ram */
#define MX35_IRAM_SIZE SZ_128K
#define MX35_L2CC_BASE_ADDR 0x30000000
#define MX35_L2CC_SIZE SZ_1M
#define MX35_AIPS1_BASE_ADDR 0x43f00000 #define MX35_AIPS1_BASE_ADDR 0x43f00000
#define MX35_AIPS1_SIZE SZ_1M #define MX35_AIPS1_SIZE SZ_1M
#define MX35_MAX_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x04000)
#define MX35_EVTMON_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x08000)
#define MX35_CLKCTL_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x0c000)
#define MX35_ETB_SLOT4_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x10000)
#define MX35_ETB_SLOT5_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x14000)
#define MX35_ECT_CTIO_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x18000)
#define MX35_I2C1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x80000)
#define MX35_I2C3_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x84000)
#define MX35_UART1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x90000)
#define MX35_UART2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x94000)
#define MX35_I2C2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x98000)
#define MX35_OWIRE_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x9c000)
#define MX35_SSI1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa0000)
#define MX35_CSPI1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa4000)
#define MX35_KPP_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa8000)
#define MX35_IOMUXC_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xac000)
#define MX35_ECT_IP1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xb8000)
#define MX35_ECT_IP2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xbc000)
#define MX35_SPBA0_BASE_ADDR 0x50000000 #define MX35_SPBA0_BASE_ADDR 0x50000000
#define MX35_SPBA0_SIZE SZ_1M #define MX35_SPBA0_SIZE SZ_1M
#define MX35_UART3_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x0c000)
#define MX35_CSPI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x10000)
#define MX35_SSI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x14000)
#define MX35_ATA_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x20000)
#define MX35_MSHC1_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x24000)
#define MX35_FEC_BASE_ADDR 0x50038000
#define MX35_SPBA_CTRL_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x3c000)
#define MX35_AIPS2_BASE_ADDR 0x53f00000 #define MX35_AIPS2_BASE_ADDR 0x53f00000
#define MX35_AIPS2_SIZE SZ_1M #define MX35_AIPS2_SIZE SZ_1M
#define MX35_CCM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x80000)
#define MX35_GPT1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x90000)
#define MX35_EPIT1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x94000)
#define MX35_EPIT2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x98000)
#define MX35_GPIO3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xa4000)
#define MX35_SCC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xac000)
#define MX35_RNGA_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb0000)
#define MX35_ESDHC1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb4000)
#define MX35_ESDHC2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb8000)
#define MX35_ESDHC3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xbc000)
#define MX35_IPU_CTRL_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc0000)
#define MX35_AUDMUX_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc4000)
#define MX35_GPIO1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xcc000)
#define MX35_GPIO2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd0000)
#define MX35_SDMA_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd4000)
#define MX35_RTC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd8000)
#define MX35_WDOG_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xdc000)
#define MX35_PWM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe0000)
#define MX35_CAN1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe4000)
#define MX35_CAN2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe8000)
#define MX35_RTIC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xec000)
#define MX35_IIM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf0000)
#define MX35_USB_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf4000)
#define MX35_USB_OTG_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0000)
/*
* The Reference Manual (IMX35RM, Rev. 2, 3/2009) claims an offset of 0x200 for
* HS. When host support was implemented only a preliminary document was
* available, which told 0x400. This works fine.
*/
#define MX35_USB_HS_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0400)
#define MX35_ROMP_BASE_ADDR 0x60000000
#define MX35_ROMP_SIZE SZ_1M
#define MX35_AVIC_BASE_ADDR 0x68000000 #define MX35_AVIC_BASE_ADDR 0x68000000
#define MX35_AVIC_SIZE SZ_1M #define MX35_AVIC_SIZE SZ_1M
/*
* Memory regions and CS
*/
#define MX35_IPU_MEM_BASE_ADDR 0x70000000
#define MX35_CSD0_BASE_ADDR 0x80000000
#define MX35_CSD1_BASE_ADDR 0x90000000
#define MX35_CS0_BASE_ADDR 0xa0000000
#define MX35_CS1_BASE_ADDR 0xa8000000
#define MX35_CS2_BASE_ADDR 0xb0000000
#define MX35_CS3_BASE_ADDR 0xb2000000
#define MX35_CS4_BASE_ADDR 0xb4000000
#define MX35_CS4_BASE_ADDR_VIRT 0xf6000000
#define MX35_CS4_SIZE SZ_32M
#define MX35_CS5_BASE_ADDR 0xb6000000
#define MX35_CS5_BASE_ADDR_VIRT 0xf8000000
#define MX35_CS5_SIZE SZ_32M
/*
* NAND, SDRAM, WEIM, M3IF, EMI controllers
*/
#define MX35_X_MEMC_BASE_ADDR 0xb8000000 #define MX35_X_MEMC_BASE_ADDR 0xb8000000
#define MX35_X_MEMC_SIZE SZ_64K #define MX35_X_MEMC_SIZE SZ_64K
#define MX35_ESDCTL_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x1000)
#define MX35_WEIM_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x2000)
#define MX35_M3IF_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x3000)
#define MX35_EMI_CTL_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x4000)
#define MX35_PCMCIA_CTL_BASE_ADDR MX35_EMI_CTL_BASE_ADDR
#define MX35_NFC_BASE_ADDR 0xbb000000
#define MX35_PCMCIA_MEM_BASE_ADDR 0xbc000000
#define MX35_IO_P2V(x) IMX_IO_P2V(x) #define MX35_IO_P2V(x) IMX_IO_P2V(x)
#define MX35_IO_ADDRESS(x) IOMEM(MX35_IO_P2V(x))
/*
* Interrupt numbers
*/
#include <asm/irq.h>
#define MX35_INT_OWIRE (NR_IRQS_LEGACY + 2)
#define MX35_INT_I2C3 (NR_IRQS_LEGACY + 3)
#define MX35_INT_I2C2 (NR_IRQS_LEGACY + 4)
#define MX35_INT_RTIC (NR_IRQS_LEGACY + 6)
#define MX35_INT_ESDHC1 (NR_IRQS_LEGACY + 7)
#define MX35_INT_ESDHC2 (NR_IRQS_LEGACY + 8)
#define MX35_INT_ESDHC3 (NR_IRQS_LEGACY + 9)
#define MX35_INT_I2C1 (NR_IRQS_LEGACY + 10)
#define MX35_INT_SSI1 (NR_IRQS_LEGACY + 11)
#define MX35_INT_SSI2 (NR_IRQS_LEGACY + 12)
#define MX35_INT_CSPI2 (NR_IRQS_LEGACY + 13)
#define MX35_INT_CSPI1 (NR_IRQS_LEGACY + 14)
#define MX35_INT_ATA (NR_IRQS_LEGACY + 15)
#define MX35_INT_GPU2D (NR_IRQS_LEGACY + 16)
#define MX35_INT_ASRC (NR_IRQS_LEGACY + 17)
#define MX35_INT_UART3 (NR_IRQS_LEGACY + 18)
#define MX35_INT_IIM (NR_IRQS_LEGACY + 19)
#define MX35_INT_RNGA (NR_IRQS_LEGACY + 22)
#define MX35_INT_EVTMON (NR_IRQS_LEGACY + 23)
#define MX35_INT_KPP (NR_IRQS_LEGACY + 24)
#define MX35_INT_RTC (NR_IRQS_LEGACY + 25)
#define MX35_INT_PWM (NR_IRQS_LEGACY + 26)
#define MX35_INT_EPIT2 (NR_IRQS_LEGACY + 27)
#define MX35_INT_EPIT1 (NR_IRQS_LEGACY + 28)
#define MX35_INT_GPT (NR_IRQS_LEGACY + 29)
#define MX35_INT_POWER_FAIL (NR_IRQS_LEGACY + 30)
#define MX35_INT_UART2 (NR_IRQS_LEGACY + 32)
#define MX35_INT_NFC (NR_IRQS_LEGACY + 33)
#define MX35_INT_SDMA (NR_IRQS_LEGACY + 34)
#define MX35_INT_USB_HS (NR_IRQS_LEGACY + 35)
#define MX35_INT_USB_OTG (NR_IRQS_LEGACY + 37)
#define MX35_INT_MSHC1 (NR_IRQS_LEGACY + 39)
#define MX35_INT_ESAI (NR_IRQS_LEGACY + 40)
#define MX35_INT_IPU_ERR (NR_IRQS_LEGACY + 41)
#define MX35_INT_IPU_SYN (NR_IRQS_LEGACY + 42)
#define MX35_INT_CAN1 (NR_IRQS_LEGACY + 43)
#define MX35_INT_CAN2 (NR_IRQS_LEGACY + 44)
#define MX35_INT_UART1 (NR_IRQS_LEGACY + 45)
#define MX35_INT_MLB (NR_IRQS_LEGACY + 46)
#define MX35_INT_SPDIF (NR_IRQS_LEGACY + 47)
#define MX35_INT_ECT (NR_IRQS_LEGACY + 48)
#define MX35_INT_SCC_SCM (NR_IRQS_LEGACY + 49)
#define MX35_INT_SCC_SMN (NR_IRQS_LEGACY + 50)
#define MX35_INT_GPIO2 (NR_IRQS_LEGACY + 51)
#define MX35_INT_GPIO1 (NR_IRQS_LEGACY + 52)
#define MX35_INT_WDOG (NR_IRQS_LEGACY + 55)
#define MX35_INT_GPIO3 (NR_IRQS_LEGACY + 56)
#define MX35_INT_FEC (NR_IRQS_LEGACY + 57)
#define MX35_INT_EXT_POWER (NR_IRQS_LEGACY + 58)
#define MX35_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59)
#define MX35_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60)
#define MX35_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61)
#define MX35_INT_EXT_WDOG (NR_IRQS_LEGACY + 62)
#define MX35_INT_EXT_TV (NR_IRQS_LEGACY + 63)
#define MX35_DMA_REQ_SSI2_RX1 22
#define MX35_DMA_REQ_SSI2_TX1 23
#define MX35_DMA_REQ_SSI2_RX0 24
#define MX35_DMA_REQ_SSI2_TX0 25
#define MX35_DMA_REQ_SSI1_RX1 26
#define MX35_DMA_REQ_SSI1_TX1 27
#define MX35_DMA_REQ_SSI1_RX0 28
#define MX35_DMA_REQ_SSI1_TX0 29
#define MX35_PROD_SIGNATURE 0x1 /* For MX31 */
#endif /* ifndef __MACH_MX35_H__ */ #endif /* ifndef __MACH_MX35_H__ */
arch/arm/mach-imx/pcm037.h deleted 100644 → 0
View file @ a4f07008
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __PCM037_H__
#define __PCM037_H__
enum pcm037_board_variant {
PCM037_PCM970,
PCM037_EET,
};
extern enum pcm037_board_variant pcm037_variant(void);
#ifdef CONFIG_MACH_PCM037_EET
int pcm037_eet_init_devices(void);
#else
static inline int pcm037_eet_init_devices(void) { return 0; }
#endif
#endif
arch/arm/mach-imx/pm-imx27.c
View file @ accdab6d
...@@ -7,6 +7,7 @@ ...@@ -7,6 +7,7 @@
* modify it under the terms of the GNU General Public License. * modify it under the terms of the GNU General Public License.
*/ */
#include <linux/of_address.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/suspend.h> #include <linux/suspend.h>
#include <linux/io.h> #include <linux/io.h>
...@@ -15,13 +16,20 @@ ...@@ -15,13 +16,20 @@
static int mx27_suspend_enter(suspend_state_t state) static int mx27_suspend_enter(suspend_state_t state)
{ {
void __iomem *ccm_base;
struct device_node *np;
u32 cscr; u32 cscr;
np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm");
ccm_base = of_iomap(np, 0);
BUG_ON(!ccm_base);
switch (state) { switch (state) {
case PM_SUSPEND_MEM: case PM_SUSPEND_MEM:
/* Clear MPEN and SPEN to disable MPLL/SPLL */ /* Clear MPEN and SPEN to disable MPLL/SPLL */
cscr = imx_readl(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); cscr = imx_readl(ccm_base);
cscr &= 0xFFFFFFFC; cscr &= 0xFFFFFFFC;
imx_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR)); imx_writel(cscr, ccm_base);
/* Executes WFI */ /* Executes WFI */
cpu_do_idle(); cpu_do_idle();
break; break;
......
arch/arm/mach-imx/ulpi.h deleted 100644 → 0
View file @ a4f07008
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __MACH_ULPI_H
#define __MACH_ULPI_H
#include <linux/usb/ulpi.h>
#ifdef CONFIG_USB_ULPI_VIEWPORT
static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags)
{
return otg_ulpi_create(&ulpi_viewport_access_ops, flags);
}
#else
static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags)
{
return NULL;
}
#endif
#endif /* __MACH_ULPI_H */
drivers/clk/imx/clk-imx27.c
View file @ accdab6d
...@@ -181,79 +181,6 @@ static void __init _mx27_clocks_init(unsigned long fref) ...@@ -181,79 +181,6 @@ static void __init _mx27_clocks_init(unsigned long fref)
imx_print_silicon_rev("i.MX27", mx27_revision()); imx_print_silicon_rev("i.MX27", mx27_revision());
} }
int __init mx27_clocks_init(unsigned long fref)
{
ccm = ioremap(MX27_CCM_BASE_ADDR, SZ_4K);
_mx27_clocks_init(fref);
clk_register_clkdev(clk[IMX27_CLK_UART1_IPG_GATE], "ipg", "imx21-uart.0");
clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.0");
clk_register_clkdev(clk[IMX27_CLK_UART2_IPG_GATE], "ipg", "imx21-uart.1");
clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.1");
clk_register_clkdev(clk[IMX27_CLK_UART3_IPG_GATE], "ipg", "imx21-uart.2");
clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.2");
clk_register_clkdev(clk[IMX27_CLK_UART4_IPG_GATE], "ipg", "imx21-uart.3");
clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.3");
clk_register_clkdev(clk[IMX27_CLK_UART5_IPG_GATE], "ipg", "imx21-uart.4");
clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.4");
clk_register_clkdev(clk[IMX27_CLK_UART6_IPG_GATE], "ipg", "imx21-uart.5");
clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.5");
clk_register_clkdev(clk[IMX27_CLK_GPT1_IPG_GATE], "ipg", "imx-gpt.0");
clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx-gpt.0");
clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.0");
clk_register_clkdev(clk[IMX27_CLK_SDHC1_IPG_GATE], "ipg", "imx21-mmc.0");
clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.1");
clk_register_clkdev(clk[IMX27_CLK_SDHC2_IPG_GATE], "ipg", "imx21-mmc.1");
clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.2");
clk_register_clkdev(clk[IMX27_CLK_SDHC2_IPG_GATE], "ipg", "imx21-mmc.2");
clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.0");
clk_register_clkdev(clk[IMX27_CLK_CSPI1_IPG_GATE], "ipg", "imx27-cspi.0");
clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.1");
clk_register_clkdev(clk[IMX27_CLK_CSPI2_IPG_GATE], "ipg", "imx27-cspi.1");
clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.2");
clk_register_clkdev(clk[IMX27_CLK_CSPI3_IPG_GATE], "ipg", "imx27-cspi.2");
clk_register_clkdev(clk[IMX27_CLK_PER3_GATE], "per", "imx21-fb.0");
clk_register_clkdev(clk[IMX27_CLK_LCDC_IPG_GATE], "ipg", "imx21-fb.0");
clk_register_clkdev(clk[IMX27_CLK_LCDC_AHB_GATE], "ahb", "imx21-fb.0");
clk_register_clkdev(clk[IMX27_CLK_CSI_AHB_GATE], "ahb", "imx27-camera.0");
clk_register_clkdev(clk[IMX27_CLK_PER4_GATE], "per", "imx27-camera.0");
clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "imx-udc-mx27");
clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "imx-udc-mx27");
clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "imx-udc-mx27");
clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.0");
clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.0");
clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.0");
clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.1");
clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.1");
clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.1");
clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.2");
clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[IMX27_CLK_SSI1_IPG_GATE], NULL, "imx-ssi.0");
clk_register_clkdev(clk[IMX27_CLK_SSI2_IPG_GATE], NULL, "imx-ssi.1");
clk_register_clkdev(clk[IMX27_CLK_NFC_BAUD_GATE], NULL, "imx27-nand.0");
clk_register_clkdev(clk[IMX27_CLK_VPU_BAUD_GATE], "per", "coda-imx27.0");
clk_register_clkdev(clk[IMX27_CLK_VPU_AHB_GATE], "ahb", "coda-imx27.0");
clk_register_clkdev(clk[IMX27_CLK_DMA_AHB_GATE], "ahb", "imx27-dma");
clk_register_clkdev(clk[IMX27_CLK_DMA_IPG_GATE], "ipg", "imx27-dma");
clk_register_clkdev(clk[IMX27_CLK_FEC_IPG_GATE], "ipg", "imx27-fec.0");
clk_register_clkdev(clk[IMX27_CLK_FEC_AHB_GATE], "ahb", "imx27-fec.0");
clk_register_clkdev(clk[IMX27_CLK_WDOG_IPG_GATE], NULL, "imx2-wdt.0");
clk_register_clkdev(clk[IMX27_CLK_I2C1_IPG_GATE], NULL, "imx21-i2c.0");
clk_register_clkdev(clk[IMX27_CLK_I2C2_IPG_GATE], NULL, "imx21-i2c.1");
clk_register_clkdev(clk[IMX27_CLK_OWIRE_IPG_GATE], NULL, "mxc_w1.0");
clk_register_clkdev(clk[IMX27_CLK_KPP_IPG_GATE], NULL, "imx-keypad");
clk_register_clkdev(clk[IMX27_CLK_EMMA_AHB_GATE], "emma-ahb", "imx27-camera.0");
clk_register_clkdev(clk[IMX27_CLK_EMMA_IPG_GATE], "emma-ipg", "imx27-camera.0");
clk_register_clkdev(clk[IMX27_CLK_EMMA_AHB_GATE], "ahb", "m2m-emmaprp.0");
clk_register_clkdev(clk[IMX27_CLK_EMMA_IPG_GATE], "ipg", "m2m-emmaprp.0");
mxc_timer_init(MX27_GPT1_BASE_ADDR, MX27_INT_GPT1, GPT_TYPE_IMX21);
return 0;
}
static void __init mx27_clocks_init_dt(struct device_node *np) static void __init mx27_clocks_init_dt(struct device_node *np)
{ {
struct device_node *refnp; struct device_node *refnp;
......
drivers/clk/imx/clk-imx31.c
View file @ accdab6d
...@@ -132,77 +132,6 @@ static void __init _mx31_clocks_init(void __iomem *base, unsigned long fref) ...@@ -132,77 +132,6 @@ static void __init _mx31_clocks_init(void __iomem *base, unsigned long fref)
clk_disable_unprepare(clk[iim_gate]); clk_disable_unprepare(clk[iim_gate]);
} }
int __init mx31_clocks_init(unsigned long fref)
{
void __iomem *base;
base = ioremap(MX31_CCM_BASE_ADDR, SZ_4K);
if (!base)
panic("%s: failed to map registers\n", __func__);
_mx31_clocks_init(base, fref);
clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
clk_register_clkdev(clk[cspi1_gate], NULL, "imx31-cspi.0");
clk_register_clkdev(clk[cspi2_gate], NULL, "imx31-cspi.1");
clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2");
clk_register_clkdev(clk[pwm_gate], "pwm", NULL);
clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
clk_register_clkdev(clk[ckil], "ref", "imx21-rtc");
clk_register_clkdev(clk[rtc_gate], "ipg", "imx21-rtc");
clk_register_clkdev(clk[epit1_gate], "epit", NULL);
clk_register_clkdev(clk[epit2_gate], "epit", NULL);
clk_register_clkdev(clk[nfc], NULL, "imx27-nand.0");
clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0");
clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.1");
clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.1");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2");
clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx27");
clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx27");
clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
/* i.mx31 has the i.mx21 type uart */
clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");
clk_register_clkdev(clk[uart2_gate], "per", "imx21-uart.1");
clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1");
clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2");
clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2");
clk_register_clkdev(clk[uart4_gate], "per", "imx21-uart.3");
clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.3");
clk_register_clkdev(clk[uart5_gate], "per", "imx21-uart.4");
clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.4");
clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0");
clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1");
clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
clk_register_clkdev(clk[sdhc1_gate], NULL, "imx31-mmc.0");
clk_register_clkdev(clk[sdhc2_gate], NULL, "imx31-mmc.1");
clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
clk_register_clkdev(clk[firi_gate], "firi", NULL);
clk_register_clkdev(clk[ata_gate], NULL, "pata_imx");
clk_register_clkdev(clk[rtic_gate], "rtic", NULL);
clk_register_clkdev(clk[rng_gate], NULL, "mxc_rnga");
clk_register_clkdev(clk[sdma_gate], NULL, "imx31-sdma");
clk_register_clkdev(clk[iim_gate], "iim", NULL);
imx_register_uart_clocks(uart_clks);
mxc_timer_init(MX31_GPT1_BASE_ADDR, MX31_INT_GPT, GPT_TYPE_IMX31);
return 0;
}
static void __init mx31_clocks_init_dt(struct device_node *np) static void __init mx31_clocks_init_dt(struct device_node *np)
{ {
struct device_node *osc_np; struct device_node *osc_np;
......
drivers/clk/imx/clk-imx35.c
View file @ accdab6d
...@@ -248,74 +248,6 @@ static void __init _mx35_clocks_init(void) ...@@ -248,74 +248,6 @@ static void __init _mx35_clocks_init(void)
imx_print_silicon_rev("i.MX35", mx35_revision()); imx_print_silicon_rev("i.MX35", mx35_revision());
} }
int __init mx35_clocks_init(void)
{
_mx35_clocks_init();
clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1");
clk_register_clkdev(clk[cspi1_gate], "per", "imx35-cspi.0");
clk_register_clkdev(clk[cspi1_gate], "ipg", "imx35-cspi.0");
clk_register_clkdev(clk[cspi2_gate], "per", "imx35-cspi.1");
clk_register_clkdev(clk[cspi2_gate], "ipg", "imx35-cspi.1");
clk_register_clkdev(clk[epit1_gate], NULL, "imx-epit.0");
clk_register_clkdev(clk[epit2_gate], NULL, "imx-epit.1");
clk_register_clkdev(clk[esdhc1_gate], "per", "sdhci-esdhc-imx35.0");
clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.0");
clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.0");
clk_register_clkdev(clk[esdhc2_gate], "per", "sdhci-esdhc-imx35.1");
clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.1");
clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.1");
clk_register_clkdev(clk[esdhc3_gate], "per", "sdhci-esdhc-imx35.2");
clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.2");
clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.2");
/* i.mx35 has the i.mx27 type fec */
clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0");
clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0");
clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1");
clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1");
clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
/* i.mx35 has the i.mx21 type uart */
clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");
clk_register_clkdev(clk[uart2_gate], "per", "imx21-uart.1");
clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1");
clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2");
clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2");
/* i.mx35 has the i.mx21 type rtc */
clk_register_clkdev(clk[ckil], "ref", "imx21-rtc");
clk_register_clkdev(clk[rtc_gate], "ipg", "imx21-rtc");
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.0");
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.1");
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx27");
clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
clk_register_clkdev(clk[admux_gate], "audmux", NULL);
mxc_timer_init(MX35_GPT1_BASE_ADDR, MX35_INT_GPT, GPT_TYPE_IMX31);
return 0;
}
static void __init mx35_clocks_init_dt(struct device_node *ccm_node) static void __init mx35_clocks_init_dt(struct device_node *ccm_node)
{ {
_mx35_clocks_init(); _mx35_clocks_init();
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7