Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 "Mostly new IDs for Elan/Synaptics touchpads, plus a few small fixups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: omap-keypad - fix keyboard debounce configuration
  Input: xpad - quirk all PDP Xbox One gamepads
  Input: synaptics - enable SMBus for HP 15-ay000
  Input: synaptics - add PNP ID for ThinkPad P50 to SMBus
  Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARR
  Input: elan_i2c - add support for ELAN0621 touchpad
  Input: hyper-v - fix wakeup from suspend-to-idle
  Input: atkbd - clean up indentation issue
  Input: st1232 - convert to SPDX identifiers
  Input: migor_ts - convert to SPDX identifiers
  Input: dt-bindings - fix a typo in file input-reset.txt
  Input: cros_ec_keyb - fix button/switch capability reports
  Input: elan_i2c - add ELAN0620 to the ACPI table
  Input: matrix_keypad - check for errors from of_get_named_gpio()

Documentation/devicetree/bindings/input/input-reset.txt

@@ -12,7 +12,7 @@ The /chosen node should contain a 'linux,sysrq-reset-seq' child node to define
 a set of keys.
 
 Required property:
-sysrq-reset-seq: array of Linux keycodes, one keycode per cell.
+keyset: array of Linux keycodes, one keycode per cell.
 
 Optional property:
 timeout-ms: duration keys must be pressed together in milliseconds before

drivers/hid/hid-hyperv.c

@@ -309,7 +309,7 @@ static void mousevsc_on_receive(struct hv_device *device,
 		hid_input_report(input_dev->hid_device, HID_INPUT_REPORT,
 				 input_dev->input_buf, len, 1);
 
-		pm_wakeup_event(&input_dev->device->device, 0);
+		pm_wakeup_hard_event(&input_dev->device->device);
 
 		break;
 	default:

drivers/input/joystick/xpad.c

@@ -480,18 +480,18 @@ static const u8 xboxone_hori_init[] = {
 };
 
 /*
- * This packet is required for some of the PDP pads to start
+ * This packet is required for most (all?) of the PDP pads to start
  * sending input reports. These pads include: (0x0e6f:0x02ab),
- * (0x0e6f:0x02a4).
+ * (0x0e6f:0x02a4), (0x0e6f:0x02a6).
  */
 static const u8 xboxone_pdp_init1[] = {
 	0x0a, 0x20, 0x00, 0x03, 0x00, 0x01, 0x14
 };
 
 /*
- * This packet is required for some of the PDP pads to start
+ * This packet is required for most (all?) of the PDP pads to start
  * sending input reports. These pads include: (0x0e6f:0x02ab),
- * (0x0e6f:0x02a4).
+ * (0x0e6f:0x02a4), (0x0e6f:0x02a6).
  */
 static const u8 xboxone_pdp_init2[] = {
 	0x06, 0x20, 0x00, 0x02, 0x01, 0x00
@@ -527,12 +527,8 @@ static const struct xboxone_init_packet xboxone_init_packets[] = {
 	XBOXONE_INIT_PKT(0x0e6f, 0x0165, xboxone_hori_init),
 	XBOXONE_INIT_PKT(0x0f0d, 0x0067, xboxone_hori_init),
 	XBOXONE_INIT_PKT(0x0000, 0x0000, xboxone_fw2015_init),
-	XBOXONE_INIT_PKT(0x0e6f, 0x02ab, xboxone_pdp_init1),
-	XBOXONE_INIT_PKT(0x0e6f, 0x02ab, xboxone_pdp_init2),
-	XBOXONE_INIT_PKT(0x0e6f, 0x02a4, xboxone_pdp_init1),
-	XBOXONE_INIT_PKT(0x0e6f, 0x02a4, xboxone_pdp_init2),
-	XBOXONE_INIT_PKT(0x0e6f, 0x02a6, xboxone_pdp_init1),
-	XBOXONE_INIT_PKT(0x0e6f, 0x02a6, xboxone_pdp_init2),
+	XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_init1),
+	XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_init2),
 	XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumblebegin_init),
 	XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumblebegin_init),
 	XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumblebegin_init),

drivers/input/keyboard/atkbd.c

@@ -841,7 +841,7 @@ static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra
 	if (param[0] != 3) {
 		param[0] = 2;
 		if (ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET))
-		return 2;
+			return 2;
 	}
 
 	ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MBR);

drivers/input/keyboard/cros_ec_keyb.c

@@ -493,7 +493,8 @@ static int cros_ec_keyb_register_bs(struct cros_ec_keyb *ckdev)
 	for (i = 0; i < ARRAY_SIZE(cros_ec_keyb_bs); i++) {
 		const struct cros_ec_bs_map *map = &cros_ec_keyb_bs[i];
 
-		if (buttons & BIT(map->bit))
+		if ((map->ev_type == EV_KEY && (buttons & BIT(map->bit))) ||
+		    (map->ev_type == EV_SW && (switches & BIT(map->bit))))
 			input_set_capability(idev, map->ev_type, map->code);
 	}
 

drivers/input/keyboard/matrix_keypad.c

@@ -407,7 +407,7 @@ matrix_keypad_parse_dt(struct device *dev)
 	struct matrix_keypad_platform_data *pdata;
 	struct device_node *np = dev->of_node;
 	unsigned int *gpios;
-	int i, nrow, ncol;
+	int ret, i, nrow, ncol;
 
 	if (!np) {
 		dev_err(dev, "device lacks DT data\n");
@@ -452,12 +452,19 @@ matrix_keypad_parse_dt(struct device *dev)
 		return ERR_PTR(-ENOMEM);
 	}
 
-	for (i = 0; i < pdata->num_row_gpios; i++)
-		gpios[i] = of_get_named_gpio(np, "row-gpios", i);
+	for (i = 0; i < nrow; i++) {
+		ret = of_get_named_gpio(np, "row-gpios", i);
+		if (ret < 0)
+			return ERR_PTR(ret);
+		gpios[i] = ret;
+	}
 
-	for (i = 0; i < pdata->num_col_gpios; i++)
-		gpios[pdata->num_row_gpios + i] =
-			of_get_named_gpio(np, "col-gpios", i);
+	for (i = 0; i < ncol; i++) {
+		ret = of_get_named_gpio(np, "col-gpios", i);
+		if (ret < 0)
+			return ERR_PTR(ret);
+		gpios[nrow + i] = ret;
+	}
 
 	pdata->row_gpios = gpios;
 	pdata->col_gpios = &gpios[pdata->num_row_gpios];
@@ -484,10 +491,8 @@ static int matrix_keypad_probe(struct platform_device *pdev)
 	pdata = dev_get_platdata(&pdev->dev);
 	if (!pdata) {
 		pdata = matrix_keypad_parse_dt(&pdev->dev);
-		if (IS_ERR(pdata)) {
-			dev_err(&pdev->dev, "no platform data defined\n");
+		if (IS_ERR(pdata))
 			return PTR_ERR(pdata);
-		}
 	} else if (!pdata->keymap_data) {
 		dev_err(&pdev->dev, "no keymap data defined\n");
 		return -EINVAL;

drivers/input/keyboard/omap4-keypad.c

@@ -60,8 +60,18 @@
 
 /* OMAP4 values */
 #define OMAP4_VAL_IRQDISABLE		0x0
-#define OMAP4_VAL_DEBOUNCINGTIME	0x7
-#define OMAP4_VAL_PVT			0x7
+
+/*
+ * Errata i689: If a key is released for a time shorter than debounce time,
+ * the keyboard will idle and never detect the key release. The workaround
+ * is to use at least a 12ms debounce time. See omap5432 TRM chapter
+ * "26.4.6.2 Keyboard Controller Timer" for more information.
+ */
+#define OMAP4_KEYPAD_PTV_DIV_128        0x6
+#define OMAP4_KEYPAD_DEBOUNCINGTIME_MS(dbms, ptv)     \
+	((((dbms) * 1000) / ((1 << ((ptv) + 1)) * (1000000 / 32768))) - 1)
+#define OMAP4_VAL_DEBOUNCINGTIME_16MS					\
+	OMAP4_KEYPAD_DEBOUNCINGTIME_MS(16, OMAP4_KEYPAD_PTV_DIV_128)
 
 enum {
 	KBD_REVISION_OMAP4 = 0,
@@ -181,9 +191,9 @@ static int omap4_keypad_open(struct input_dev *input)
 
 	kbd_writel(keypad_data, OMAP4_KBD_CTRL,
 			OMAP4_DEF_CTRL_NOSOFTMODE |
-			(OMAP4_VAL_PVT << OMAP4_DEF_CTRL_PTV_SHIFT));
+			(OMAP4_KEYPAD_PTV_DIV_128 << OMAP4_DEF_CTRL_PTV_SHIFT));
 	kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME,
-			OMAP4_VAL_DEBOUNCINGTIME);
+			OMAP4_VAL_DEBOUNCINGTIME_16MS);
 	/* clear pending interrupts */
 	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
 			 kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));

drivers/input/mouse/elan_i2c_core.c

@@ -1348,6 +1348,9 @@ static const struct acpi_device_id elan_acpi_id[] = {
 	{ "ELAN0618", 0 },
 	{ "ELAN061C", 0 },
 	{ "ELAN061D", 0 },
+	{ "ELAN061E", 0 },
+	{ "ELAN0620", 0 },
+	{ "ELAN0621", 0 },
 	{ "ELAN0622", 0 },
 	{ "ELAN1000", 0 },
 	{ }

drivers/input/mouse/synaptics.c

@@ -170,6 +170,7 @@ static const char * const smbus_pnp_ids[] = {
 	"LEN0048", /* X1 Carbon 3 */
 	"LEN0046", /* X250 */
 	"LEN004a", /* W541 */
+	"LEN005b", /* P50 */
 	"LEN0071", /* T480 */
 	"LEN0072", /* X1 Carbon Gen 5 (2017) - Elan/ALPS trackpoint */
 	"LEN0073", /* X1 Carbon G5 (Elantech) */
@@ -177,6 +178,7 @@ static const char * const smbus_pnp_ids[] = {
 	"LEN0096", /* X280 */
 	"LEN0097", /* X280 -> ALPS trackpoint */
 	"LEN200f", /* T450s */
+	"SYN3221", /* HP 15-ay000 */
 	NULL
 };
 

drivers/input/serio/hyperv-keyboard.c

@@ -177,7 +177,7 @@ static void hv_kbd_on_receive(struct hv_device *hv_dev,
 		 * state because the Enter-UP can trigger a wakeup at once.
 		 */
 		if (!(info & IS_BREAK))
-			pm_wakeup_event(&hv_dev->device, 0);
+			pm_wakeup_hard_event(&hv_dev->device);
 
 		break;
 

drivers/input/touchscreen/migor_ts.c

+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Touch Screen driver for Renesas MIGO-R Platform
  *
  * Copyright (c) 2008 Magnus Damm
  * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>,
  *  Kenati Technologies Pvt Ltd.
- *
- * This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU  General Public
- * License as published by the Free Software Foundation; either
- * version 2 of the License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *  General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #include <linux/module.h>
 #include <linux/kernel.h>

drivers/input/touchscreen/st1232.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * ST1232 Touchscreen Controller Driver
  *
@@ -7,15 +8,6 @@
  * Using code from:
  *  - android.git.kernel.org: projects/kernel/common.git: synaptics_i2c_rmi.c
  *	Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/delay.h>
@@ -295,4 +287,4 @@ module_i2c_driver(st1232_ts_driver);
 
 MODULE_AUTHOR("Tony SIM <chinyeow.sim.xt@renesas.com>");
 MODULE_DESCRIPTION("SITRONIX ST1232 Touchscreen Controller Driver");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");