Merge branch 'topic/drop-l3' into for-linus

include/sound/uda1341.h

-/*
- *  linux/include/linux/l3/uda1341.h
- *
- * Philips UDA1341 mixer device driver for ALSA
- *
- * Copyright (c) 2002 Tomas Kasparek <tomas.kasparek@seznam.cz>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License.
- *
- * History:
- *
- * 2002-03-13 Tomas Kasparek Initial release - based on uda1341.h from OSS
- * 2002-03-30 Tomas Kasparek Proc filesystem support, complete mixer and DSP
- *                           features support
- */
-
-#define UDA1341_ALSA_NAME "snd-uda1341"
-
-/*
- * Default rate set after inicialization
- */
-#define AUDIO_RATE_DEFAULT	44100
-
-/*
- * UDA1341 L3 address and command types
- */
-#define UDA1341_L3ADDR		5
-#define UDA1341_DATA0		(UDA1341_L3ADDR << 2 | 0)
-#define UDA1341_DATA1		(UDA1341_L3ADDR << 2 | 1)
-#define UDA1341_STATUS		(UDA1341_L3ADDR << 2 | 2)
-
-enum uda1341_onoff {
-	OFF=0,
-	ON,
-};
-
-enum uda1341_format {
-	I2S=0,
-	LSB16,
-	LSB18,
-	LSB20,
-	MSB,
-	LSB16MSB,
-	LSB18MSB,
-	LSB20MSB,        
-};
-
-enum uda1341_fs {
-	F512=0,
-	F384,
-	F256,
-	Funused,
-};
-
-enum uda1341_peak {
-	BEFORE=0,
-	AFTER,
-};
-
-enum uda1341_filter {
-	FLAT=0,
-	MIN,
-	MIN2,
-	MAX,
-};
-
-enum uda1341_mixer {
-	DOUBLE,
-	LINE,
-	MIC,
-	MIXER,
-};
-
-enum uda1341_deemp {
-	NONE,
-	D32,
-	D44,
-	D48,
-};
-
-enum uda1341_config {
-	CMD_READ_REG = 0,
-	CMD_RESET,
-	CMD_FS,
-	CMD_FORMAT,
-	CMD_OGAIN,
-	CMD_IGAIN,
-	CMD_DAC,
-	CMD_ADC,
-	CMD_VOLUME,
-	CMD_BASS,
-	CMD_TREBBLE,
-	CMD_PEAK,
-	CMD_DEEMP,
-	CMD_MUTE,        
-	CMD_FILTER,
-	CMD_CH1,
-	CMD_CH2,
-	CMD_MIC,       
-	CMD_MIXER,
-	CMD_AGC,
-	CMD_IG,
-	CMD_AGC_TIME,
-	CMD_AGC_LEVEL,
-#ifdef CONFIG_PM
-	CMD_SUSPEND,
-	CMD_RESUME,
-#endif
-	CMD_LAST,
-};
-
-enum write_through {
-	//used in update_bits (write_cfg) to avoid l3_write - just update local copy of regs.
-	REGS_ONLY=0,
-	//update local regs and write value to uda1341 - do l3_write
-	FLUSH,
-};
-
-int __init snd_chip_uda1341_mixer_new(struct snd_card *card, struct l3_client **clnt);
-
-/*
- * Local variables:
- * indent-tabs-mode: t
- * End:
- */

sound/arm/Kconfig

@@ -11,17 +11,6 @@ menuconfig SND_ARM
 
 if SND_ARM
 
-config SND_SA11XX_UDA1341
-	tristate "SA11xx UDA1341TS driver (iPaq H3600)"
-	depends on ARCH_SA1100 && L3
-	select SND_PCM
-	help
-	  Say Y here if you have a Compaq iPaq H3x00 handheld computer
-	  and want to use its Philips UDA 1341 audio chip.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called snd-sa11xx-uda1341.
-
 config SND_ARMAACI
 	tristate "ARM PrimeCell PL041 AC Link support"
 	depends on ARM_AMBA

sound/arm/Makefile

@@ -2,9 +2,6 @@
 # Makefile for ALSA
 #
 
-obj-$(CONFIG_SND_SA11XX_UDA1341) += snd-sa11xx-uda1341.o 
-snd-sa11xx-uda1341-objs		:= sa11xx-uda1341.o
-
 obj-$(CONFIG_SND_ARMAACI)	+= snd-aaci.o
 snd-aaci-objs			:= aaci.o devdma.o
 

sound/i2c/Makefile

@@ -7,8 +7,6 @@ snd-i2c-objs := i2c.o
 snd-cs8427-objs := cs8427.o
 snd-tea6330t-objs := tea6330t.o
 
-obj-$(CONFIG_L3) += l3/
-
 obj-$(CONFIG_SND) += other/
 
 # Toplevel Module Dependency

sound/i2c/l3/Makefile

-#
-# Makefile for ALSA
-#
-
-snd-uda1341-objs := uda1341.o
-
-# Module Dependency
-obj-$(CONFIG_SND_SA11XX_UDA1341) += snd-uda1341.o