Commit ae2b21b0 authored by Eran Harary's avatar Eran Harary Committed by Emmanuel Grumbach

iwlwifi: mvm: support NVM sections for family 8000

The identification of the hardware section in the NVM
of new devices has been changed, hence the need to add it
to iwl_cfg and adapt the code that uses this value
accordingly.
Signed-off-by: default avatarEran Harary <eran.harary@intel.com>
Reviewed-by: default avatarJohannes Berg <johannes.berg@intel.com>
Signed-off-by: default avatarEmmanuel Grumbach <emmanuel.grumbach@intel.com>
parent 503ab8c5
......@@ -95,6 +95,8 @@
#define IWL7265_FW_PRE "iwlwifi-7265-"
#define IWL7265_MODULE_FIRMWARE(api) IWL7265_FW_PRE __stringify(api) ".ucode"
#define NVM_HW_SECTION_NUM_FAMILY_7000 0
static const struct iwl_base_params iwl7000_base_params = {
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.num_of_queues = IWLAGN_NUM_QUEUES,
......@@ -120,7 +122,8 @@ static const struct iwl_ht_params iwl7000_ht_params = {
.max_inst_size = IWL60_RTC_INST_SIZE, \
.max_data_size = IWL60_RTC_DATA_SIZE, \
.base_params = &iwl7000_base_params, \
.led_mode = IWL_LED_RF_STATE
.led_mode = IWL_LED_RF_STATE, \
.nvm_hw_section_num = NVM_HW_SECTION_NUM_FAMILY_7000
const struct iwl_cfg iwl7260_2ac_cfg = {
......
......@@ -82,6 +82,8 @@
#define IWL8000_FW_PRE "iwlwifi-8000-"
#define IWL8000_MODULE_FIRMWARE(api) IWL8000_FW_PRE __stringify(api) ".ucode"
#define NVM_HW_SECTION_NUM_FAMILY_8000 10
static const struct iwl_base_params iwl8000_base_params = {
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.num_of_queues = IWLAGN_NUM_QUEUES,
......@@ -106,7 +108,8 @@ static const struct iwl_ht_params iwl8000_ht_params = {
.max_inst_size = IWL60_RTC_INST_SIZE, \
.max_data_size = IWL60_RTC_DATA_SIZE, \
.base_params = &iwl8000_base_params, \
.led_mode = IWL_LED_RF_STATE
.led_mode = IWL_LED_RF_STATE, \
.nvm_hw_section_num = NVM_HW_SECTION_NUM_FAMILY_8000
const struct iwl_cfg iwl8260_2ac_cfg = {
.name = "Intel(R) Dual Band Wireless AC 8260",
......
......@@ -218,6 +218,7 @@ struct iwl_eeprom_params {
* @high_temp: Is this NIC is designated to be in high temperature.
* @host_interrupt_operation_mode: device needs host interrupt operation
* mode set
* @nvm_hw_section_num: the ID of the HW NVM section
*
* We enable the driver to be backward compatible wrt. hardware features.
* API differences in uCode shouldn't be handled here but through TLVs
......@@ -248,6 +249,7 @@ struct iwl_cfg {
const bool internal_wimax_coex;
const bool host_interrupt_operation_mode;
bool high_temp;
u8 nvm_hw_section_num;
};
/*
......
......@@ -304,6 +304,7 @@ struct iwl_phy_cfg_cmd {
#define PHY_CFG_RX_CHAIN_B BIT(13)
#define PHY_CFG_RX_CHAIN_C BIT(14)
#define NVM_MAX_NUM_SECTIONS 11
/* Target of the NVM_ACCESS_CMD */
enum {
......@@ -314,14 +315,9 @@ enum {
/* Section types for NVM_ACCESS_CMD */
enum {
NVM_SECTION_TYPE_HW = 0,
NVM_SECTION_TYPE_SW,
NVM_SECTION_TYPE_PAPD,
NVM_SECTION_TYPE_BT,
NVM_SECTION_TYPE_CALIBRATION,
NVM_SECTION_TYPE_PRODUCTION,
NVM_SECTION_TYPE_POST_FCS_CALIB,
NVM_NUM_OF_SECTIONS,
NVM_SECTION_TYPE_SW = 1,
NVM_SECTION_TYPE_CALIBRATION = 4,
NVM_SECTION_TYPE_PRODUCTION = 5,
};
/**
......
......@@ -470,7 +470,7 @@ struct iwl_mvm {
struct iwl_nvm_data *nvm_data;
/* NVM sections */
struct iwl_nvm_section nvm_sections[NVM_NUM_OF_SECTIONS];
struct iwl_nvm_section nvm_sections[NVM_MAX_NUM_SECTIONS];
/* EEPROM MAC addresses */
struct mac_address addresses[IWL_MVM_MAX_ADDRESSES];
......
......@@ -67,14 +67,6 @@
#include "iwl-eeprom-read.h"
#include "iwl-nvm-parse.h"
/* list of NVM sections we are allowed/need to read */
static const int nvm_to_read[] = {
NVM_SECTION_TYPE_HW,
NVM_SECTION_TYPE_SW,
NVM_SECTION_TYPE_CALIBRATION,
NVM_SECTION_TYPE_PRODUCTION,
};
/* Default NVM size to read */
#define IWL_NVM_DEFAULT_CHUNK_SIZE (2*1024)
#define IWL_MAX_NVM_SECTION_SIZE 7000
......@@ -240,7 +232,7 @@ iwl_parse_nvm_sections(struct iwl_mvm *mvm)
/* Checking for required sections */
if (!mvm->nvm_sections[NVM_SECTION_TYPE_SW].data ||
!mvm->nvm_sections[NVM_SECTION_TYPE_HW].data) {
!mvm->nvm_sections[mvm->cfg->nvm_hw_section_num].data) {
IWL_ERR(mvm, "Can't parse empty NVM sections\n");
return NULL;
}
......@@ -248,7 +240,7 @@ iwl_parse_nvm_sections(struct iwl_mvm *mvm)
if (WARN_ON(!mvm->cfg))
return NULL;
hw = (const __le16 *)sections[NVM_SECTION_TYPE_HW].data;
hw = (const __le16 *)sections[mvm->cfg->nvm_hw_section_num].data;
sw = (const __le16 *)sections[NVM_SECTION_TYPE_SW].data;
calib = (const __le16 *)sections[NVM_SECTION_TYPE_CALIBRATION].data;
return iwl_parse_nvm_data(mvm->trans->dev, mvm->cfg, hw, sw, calib,
......@@ -367,7 +359,7 @@ static int iwl_mvm_read_external_nvm(struct iwl_mvm *mvm)
break;
}
if (WARN(section_id >= NVM_NUM_OF_SECTIONS,
if (WARN(section_id >= NVM_MAX_NUM_SECTIONS,
"Invalid NVM section ID %d\n", section_id)) {
ret = -EINVAL;
break;
......@@ -415,6 +407,9 @@ int iwl_nvm_init(struct iwl_mvm *mvm)
int ret, i, section;
u8 *nvm_buffer, *temp;
if (WARN_ON_ONCE(mvm->cfg->nvm_hw_section_num >= NVM_MAX_NUM_SECTIONS))
return -EINVAL;
/* load external NVM if configured */
if (iwlwifi_mod_params.nvm_file) {
/* move to External NVM flow */
......@@ -422,6 +417,14 @@ int iwl_nvm_init(struct iwl_mvm *mvm)
if (ret)
return ret;
} else {
/* list of NVM sections we are allowed/need to read */
int nvm_to_read[] = {
mvm->cfg->nvm_hw_section_num,
NVM_SECTION_TYPE_SW,
NVM_SECTION_TYPE_CALIBRATION,
NVM_SECTION_TYPE_PRODUCTION,
};
/* Read From FW NVM */
IWL_DEBUG_EEPROM(mvm->trans->dev, "Read from NVM\n");
......@@ -446,10 +449,6 @@ int iwl_nvm_init(struct iwl_mvm *mvm)
#ifdef CONFIG_IWLWIFI_DEBUGFS
switch (section) {
case NVM_SECTION_TYPE_HW:
mvm->nvm_hw_blob.data = temp;
mvm->nvm_hw_blob.size = ret;
break;
case NVM_SECTION_TYPE_SW:
mvm->nvm_sw_blob.data = temp;
mvm->nvm_sw_blob.size = ret;
......@@ -463,6 +462,11 @@ int iwl_nvm_init(struct iwl_mvm *mvm)
mvm->nvm_prod_blob.size = ret;
break;
default:
if (section == mvm->cfg->nvm_hw_section_num) {
mvm->nvm_hw_blob.data = temp;
mvm->nvm_hw_blob.size = ret;
break;
}
WARN(1, "section: %d", section);
}
#endif
......
......@@ -511,7 +511,7 @@ static void iwl_op_mode_mvm_stop(struct iwl_op_mode *op_mode)
mvm->phy_db = NULL;
iwl_free_nvm_data(mvm->nvm_data);
for (i = 0; i < NVM_NUM_OF_SECTIONS; i++)
for (i = 0; i < NVM_MAX_NUM_SECTIONS; i++)
kfree(mvm->nvm_sections[i].data);
ieee80211_free_hw(mvm->hw);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment