Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  at24: Use timeout also for read
  i2c: Fix userspace_device list corruption
  MAINTAINERS: Add missing i2c files
  i2c/tsl2550: Fix lux value in extended mode

MAINTAINERS

@@ -2562,8 +2562,7 @@ S:	Maintained
 F:	Documentation/i2c/
 F:	drivers/i2c/
 F:	include/linux/i2c.h
-F:	include/linux/i2c-dev.h
-F:	include/linux/i2c-id.h
+F:	include/linux/i2c-*.h
 
 I2C-TINY-USB DRIVER
 M:	Till Harbaum <till@harbaum.org>

drivers/i2c/chips/tsl2550.c

@@ -257,6 +257,7 @@ static DEVICE_ATTR(operating_mode, S_IWUSR | S_IRUGO,
 
 static ssize_t __tsl2550_show_lux(struct i2c_client *client, char *buf)
 {
+	struct tsl2550_data *data = i2c_get_clientdata(client);
 	u8 ch0, ch1;
 	int ret;
 
@@ -274,6 +275,8 @@ static ssize_t __tsl2550_show_lux(struct i2c_client *client, char *buf)
 	ret = tsl2550_calculate_lux(ch0, ch1);
 	if (ret < 0)
 		return ret;
+	if (data->operating_mode == 1)
+		ret *= 5;
 
 	return sprintf(buf, "%d\n", ret);
 }

drivers/i2c/i2c-core.c

@@ -762,6 +762,7 @@ int i2c_del_adapter(struct i2c_adapter *adap)
 {
 	int res = 0;
 	struct i2c_adapter *found;
+	struct i2c_client *client, *next;
 
 	/* First make sure that this adapter was ever added */
 	mutex_lock(&core_lock);
@@ -781,6 +782,16 @@ int i2c_del_adapter(struct i2c_adapter *adap)
 	if (res)
 		return res;
 
+	/* Remove devices instantiated from sysfs */
+	list_for_each_entry_safe(client, next, &userspace_devices, detected) {
+		if (client->adapter == adap) {
+			dev_dbg(&adap->dev, "Removing %s at 0x%x\n",
+				client->name, client->addr);
+			list_del(&client->detected);
+			i2c_unregister_device(client);
+		}
+	}
+
 	/* Detach any active clients. This can't fail, thus we do not
 	   checking the returned value. */
 	res = device_for_each_child(&adap->dev, NULL, __unregister_client);

drivers/misc/eeprom/at24.c

@@ -158,6 +158,7 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
 	struct i2c_msg msg[2];
 	u8 msgbuf[2];
 	struct i2c_client *client;
+	unsigned long timeout, read_time;
 	int status, i;
 
 	memset(msg, 0, sizeof(msg));
@@ -183,22 +184,17 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
 	if (count > io_limit)
 		count = io_limit;
 
-	/* Smaller eeproms can work given some SMBus extension calls */
 	if (at24->use_smbus) {
+		/* Smaller eeproms can work given some SMBus extension calls */
 		if (count > I2C_SMBUS_BLOCK_MAX)
 			count = I2C_SMBUS_BLOCK_MAX;
-		status = i2c_smbus_read_i2c_block_data(client, offset,
-				count, buf);
-		dev_dbg(&client->dev, "smbus read %zu@%d --> %d\n",
-				count, offset, status);
-		return (status < 0) ? -EIO : status;
-	}
-
+	} else {
 		/*
-	 * When we have a better choice than SMBus calls, use a combined
-	 * I2C message. Write address; then read up to io_limit data bytes.
-	 * Note that read page rollover helps us here (unlike writes).
-	 * msgbuf is u8 and will cast to our needs.
+		 * When we have a better choice than SMBus calls, use a
+		 * combined I2C message. Write address; then read up to
+		 * io_limit data bytes. Note that read page rollover helps us
+		 * here (unlike writes). msgbuf is u8 and will cast to our
+		 * needs.
 		 */
 		i = 0;
 		if (at24->chip.flags & AT24_FLAG_ADDR16)
@@ -213,17 +209,35 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
 		msg[1].flags = I2C_M_RD;
 		msg[1].buf = buf;
 		msg[1].len = count;
+	}
 
+	/*
+	 * Reads fail if the previous write didn't complete yet. We may
+	 * loop a few times until this one succeeds, waiting at least
+	 * long enough for one entire page write to work.
+	 */
+	timeout = jiffies + msecs_to_jiffies(write_timeout);
+	do {
+		read_time = jiffies;
+		if (at24->use_smbus) {
+			status = i2c_smbus_read_i2c_block_data(client, offset,
+					count, buf);
+		} else {
 			status = i2c_transfer(client->adapter, msg, 2);
-	dev_dbg(&client->dev, "i2c read %zu@%d --> %d\n",
-			count, offset, status);
-
 			if (status == 2)
+				status = count;
+		}
+		dev_dbg(&client->dev, "read %zu@%d --> %d (%ld)\n",
+				count, offset, status, jiffies);
+
+		if (status == count)
 			return count;
-	else if (status >= 0)
-		return -EIO;
-	else
-		return status;
+
+		/* REVISIT: at HZ=100, this is sloooow */
+		msleep(1);
+	} while (time_before(read_time, timeout));
+
+	return -ETIMEDOUT;
 }
 
 static ssize_t at24_read(struct at24_data *at24,