Merge tag 'usb-4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are two small fixes, and one new device id, for 4.8-rc7

  The fixes solve a build error that was reported in your tree for the
  blackfin arch, and resolve an issue with a number of broken USB
  devices that reported the wrong interval rate.  Included here is also
  a new device id for the usb-serial driver.

  All have been in linux-next with no reported issues"

* tag 'usb-4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: change bInterval default to 10 ms
  usb: musb: Fix tusb6010 compile error on blackfin
  USB: serial: simple: add support for another Infineon flashloader

drivers/usb/core/config.c

@@ -240,8 +240,10 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 	memcpy(&endpoint->desc, d, n);
 	INIT_LIST_HEAD(&endpoint->urb_list);
 
-	/* Fix up bInterval values outside the legal range. Use 32 ms if no
-	 * proper value can be guessed. */
+	/*
+	 * Fix up bInterval values outside the legal range.
+	 * Use 10 or 8 ms if no proper value can be guessed.
+	 */
 	i = 0;		/* i = min, j = max, n = default */
 	j = 255;
 	if (usb_endpoint_xfer_int(d)) {
@@ -250,13 +252,15 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 		case USB_SPEED_SUPER_PLUS:
 		case USB_SPEED_SUPER:
 		case USB_SPEED_HIGH:
-			/* Many device manufacturers are using full-speed
+			/*
+			 * Many device manufacturers are using full-speed
 			 * bInterval values in high-speed interrupt endpoint
-			 * descriptors. Try to fix those and fall back to a
-			 * 32 ms default value otherwise. */
+			 * descriptors. Try to fix those and fall back to an
+			 * 8-ms default value otherwise.
+			 */
 			n = fls(d->bInterval*8);
 			if (n == 0)
-				n = 9;	/* 32 ms = 2^(9-1) uframes */
+				n = 7;	/* 8 ms = 2^(7-1) uframes */
 			j = 16;
 
 			/*
@@ -271,10 +275,12 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 			}
 			break;
 		default:		/* USB_SPEED_FULL or _LOW */
-			/* For low-speed, 10 ms is the official minimum.
+			/*
+			 * For low-speed, 10 ms is the official minimum.
 			 * But some "overclocked" devices might want faster
-			 * polling so we'll allow it. */
-			n = 32;
+			 * polling so we'll allow it.
+			 */
+			n = 10;
 			break;
 		}
 	} else if (usb_endpoint_xfer_isoc(d)) {
@@ -282,10 +288,10 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 		j = 16;
 		switch (to_usb_device(ddev)->speed) {
 		case USB_SPEED_HIGH:
-			n = 9;		/* 32 ms = 2^(9-1) uframes */
+			n = 7;		/* 8 ms = 2^(7-1) uframes */
 			break;
 		default:		/* USB_SPEED_FULL */
-			n = 6;		/* 32 ms = 2^(6-1) frames */
+			n = 4;		/* 8 ms = 2^(4-1) frames */
 			break;
 		}
 	}

drivers/usb/musb/Kconfig

@@ -87,7 +87,7 @@ config USB_MUSB_DA8XX
 config USB_MUSB_TUSB6010
 	tristate "TUSB6010"
 	depends on HAS_IOMEM
-	depends on ARCH_OMAP2PLUS || COMPILE_TEST
+	depends on (ARCH_OMAP2PLUS || COMPILE_TEST) && !BLACKFIN
 	depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules
 
 config USB_MUSB_OMAP2PLUS

drivers/usb/serial/usb-serial-simple.c

@@ -54,7 +54,8 @@ DEVICE(funsoft, FUNSOFT_IDS);
 /* Infineon Flashloader driver */
 #define FLASHLOADER_IDS()		\
 	{ USB_DEVICE_INTERFACE_CLASS(0x058b, 0x0041, USB_CLASS_CDC_DATA) }, \
-	{ USB_DEVICE(0x8087, 0x0716) }
+	{ USB_DEVICE(0x8087, 0x0716) }, \
+	{ USB_DEVICE(0x8087, 0x0801) }
 DEVICE(flashloader, FLASHLOADER_IDS);
 
 /* Google Serial USB SubClass */