qed: Use %pM format specifier for MAC addresses

Convert to %pM instead of using custom code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qed/qed_mcp.c

@@ -2518,11 +2518,10 @@ int qed_mcp_fill_shmem_func_info(struct qed_hwfn *p_hwfn,
 	}
 
 	DP_VERBOSE(p_hwfn, (QED_MSG_SP | NETIF_MSG_IFUP),
-		   "Read configuration from shmem: pause_on_host %02x protocol %02x BW [%02x - %02x] MAC %02x:%02x:%02x:%02x:%02x:%02x wwn port %llx node %llx ovlan %04x wol %02x\n",
+		   "Read configuration from shmem: pause_on_host %02x protocol %02x BW [%02x - %02x] MAC %pM wwn port %llx node %llx ovlan %04x wol %02x\n",
 		info->pause_on_host, info->protocol,
 		info->bandwidth_min, info->bandwidth_max,
-		info->mac[0], info->mac[1], info->mac[2],
-		info->mac[3], info->mac[4], info->mac[5],
+		info->mac,
 		info->wwn_port, info->wwn_node,
 		info->ovlan, (u8)p_hwfn->hw_info.b_wol_support);
 

drivers/net/ethernet/qlogic/qed/qed_sriov.c

@@ -3276,14 +3276,12 @@ static void qed_iov_vf_mbx_ucast_filter(struct qed_hwfn *p_hwfn,
 
 	DP_VERBOSE(p_hwfn,
 		   QED_MSG_IOV,
-		   "VF[%d]: opcode 0x%02x type 0x%02x [%s %s] [vport 0x%02x] MAC %02x:%02x:%02x:%02x:%02x:%02x, vlan 0x%04x\n",
+		   "VF[%d]: opcode 0x%02x type 0x%02x [%s %s] [vport 0x%02x] MAC %pM, vlan 0x%04x\n",
 		   vf->abs_vf_id, params.opcode, params.type,
 		   params.is_rx_filter ? "RX" : "",
 		   params.is_tx_filter ? "TX" : "",
 		   params.vport_to_add_to,
-		   params.mac[0], params.mac[1],
-		   params.mac[2], params.mac[3],
-		   params.mac[4], params.mac[5], params.vlan);
+		   params.mac, params.vlan);
 
 	if (!vf->vport_instance) {
 		DP_VERBOSE(p_hwfn,