Commit b0c664cc authored by Bjorn Andersson's avatar Bjorn Andersson Committed by Sam Ravnborg

panel: simple: Add BOE NV133FHM-N61

The BOE NV133FHM-N61 panel is a 13.3" 1920x1080 eDP panel, add support
for it in panel-simple.
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: default avatarSam Ravnborg <sam@ravnborg.org>
[add boe_nv133fhm_n61_modes in alphabetical order]
Link: https://patchwork.freedesktop.org/patch/msgid/20200420215742.1927498-2-bjorn.andersson@linaro.org
parent 1a8afd1e
...@@ -1172,6 +1172,36 @@ static const struct panel_desc boe_nv101wxmn51 = { ...@@ -1172,6 +1172,36 @@ static const struct panel_desc boe_nv101wxmn51 = {
}, },
}; };
static const struct drm_display_mode boe_nv133fhm_n61_modes = {
.clock = 147840,
.hdisplay = 1920,
.hsync_start = 1920 + 48,
.hsync_end = 1920 + 48 + 32,
.htotal = 1920 + 48 + 32 + 200,
.vdisplay = 1080,
.vsync_start = 1080 + 3,
.vsync_end = 1080 + 3 + 6,
.vtotal = 1080 + 3 + 6 + 31,
.vrefresh = 60,
};
static const struct panel_desc boe_nv133fhm_n61 = {
.modes = &boe_nv133fhm_n61_modes,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 300,
.height = 187,
},
.delay = {
.hpd_absent_delay = 200,
.unprepare = 500,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
.bus_flags = DRM_BUS_FLAG_DATA_MSB_TO_LSB,
.connector_type = DRM_MODE_CONNECTOR_eDP,
};
static const struct drm_display_mode boe_nv140fhmn49_modes[] = { static const struct drm_display_mode boe_nv140fhmn49_modes[] = {
{ {
.clock = 148500, .clock = 148500,
...@@ -3594,6 +3624,9 @@ static const struct of_device_id platform_of_match[] = { ...@@ -3594,6 +3624,9 @@ static const struct of_device_id platform_of_match[] = {
}, { }, {
.compatible = "boe,nv101wxmn51", .compatible = "boe,nv101wxmn51",
.data = &boe_nv101wxmn51, .data = &boe_nv101wxmn51,
}, {
.compatible = "boe,nv133fhm-n61",
.data = &boe_nv133fhm_n61,
}, { }, {
.compatible = "boe,nv140fhmn49", .compatible = "boe,nv140fhmn49",
.data = &boe_nv140fhmn49, .data = &boe_nv140fhmn49,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment