Merge tag 'staging-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO fixes from Greg KH:
 "Here is a bunch of IIO driver fixes, and some smaller staging driver
  fixes, for 5.1-rc6. The IIO fixes were delayed due to my vacation, but
  all resolve a number of reported issues and have been in linux-next
  for a few weeks with no reported issues.

  The other staging driver fixes are all tiny, resolving some reported
  issues in the comedi and most drivers, as well as some erofs fixes.

  All of these patches have been in linux-next with no reported issues"

* tag 'staging-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (24 commits)
  staging: comedi: ni_usb6501: Fix possible double-free of ->usb_rx_buf
  staging: comedi: ni_usb6501: Fix use of uninitialized mutex
  staging: erofs: fix unexpected out-of-bound data access
  staging: comedi: vmk80xx: Fix possible double-free of ->usb_rx_buf
  staging: comedi: vmk80xx: Fix use of uninitialized semaphore
  staging: most: core: use device description as name
  iio: core: fix a possible circular locking dependency
  iio: ad_sigma_delta: select channel when reading register
  iio: pms7003: select IIO_TRIGGERED_BUFFER
  iio: cros_ec: Fix the maths for gyro scale calculation
  iio: adc: xilinx: prevent touching unclocked h/w on remove
  iio: adc: xilinx: fix potential use-after-free on probe
  iio: adc: xilinx: fix potential use-after-free on remove
  iio: dac: mcp4725: add missing powerdown bits in store eeprom
  io: accel: kxcjk1013: restore the range after resume.
  iio:chemical:bme680: Fix SPI read interface
  iio:chemical:bme680: Fix, report temperature in millidegrees
  iio: chemical: fix missing Kconfig block for sgp30
  iio: adc: at91: disable adc channel interrupt in timeout case
  iio: gyro: mpu3050: fix chip ID reading
  ...

drivers/iio/accel/kxcjk-1013.c

@@ -1437,6 +1437,8 @@ static int kxcjk1013_resume(struct device *dev)
 
 	mutex_lock(&data->mutex);
 	ret = kxcjk1013_set_mode(data, OPERATION);
+	if (ret == 0)
+		ret = kxcjk1013_set_range(data, data->range);
 	mutex_unlock(&data->mutex);
 
 	return ret;

drivers/iio/adc/ad_sigma_delta.c

@@ -121,6 +121,7 @@ static int ad_sd_read_reg_raw(struct ad_sigma_delta *sigma_delta,
 	if (sigma_delta->info->has_registers) {
 		data[0] = reg << sigma_delta->info->addr_shift;
 		data[0] |= sigma_delta->info->read_mask;
+		data[0] |= sigma_delta->comm;
 		spi_message_add_tail(&t[0], &m);
 	}
 	spi_message_add_tail(&t[1], &m);

drivers/iio/adc/at91_adc.c

@@ -704,23 +704,29 @@ static int at91_adc_read_raw(struct iio_dev *idev,
 		ret = wait_event_interruptible_timeout(st->wq_data_avail,
 						       st->done,
 						       msecs_to_jiffies(1000));
-		if (ret == 0)
-			ret = -ETIMEDOUT;
-		if (ret < 0) {
-			mutex_unlock(&st->lock);
-			return ret;
-		}
-
-		*val = st->last_value;
 
+		/* Disable interrupts, regardless if adc conversion was
+		 * successful or not
+		 */
 		at91_adc_writel(st, AT91_ADC_CHDR,
 				AT91_ADC_CH(chan->channel));
 		at91_adc_writel(st, AT91_ADC_IDR, BIT(chan->channel));
 
-		st->last_value = 0;
-		st->done = false;
+		if (ret > 0) {
+			/* a valid conversion took place */
+			*val = st->last_value;
+			st->last_value = 0;
+			st->done = false;
+			ret = IIO_VAL_INT;
+		} else if (ret == 0) {
+			/* conversion timeout */
+			dev_err(&idev->dev, "ADC Channel %d timeout.\n",
+				chan->channel);
+			ret = -ETIMEDOUT;
+		}
+
 		mutex_unlock(&st->lock);
-		return IIO_VAL_INT;
+		return ret;
 
 	case IIO_CHAN_INFO_SCALE:
 		*val = st->vref_mv;

drivers/iio/adc/xilinx-xadc-core.c

@@ -1292,6 +1292,7 @@ static int xadc_probe(struct platform_device *pdev)
 
 err_free_irq:
 	free_irq(xadc->irq, indio_dev);
+	cancel_delayed_work_sync(&xadc->zynq_unmask_work);
 err_clk_disable_unprepare:
 	clk_disable_unprepare(xadc->clk);
 err_free_samplerate_trigger:
@@ -1321,8 +1322,8 @@ static int xadc_remove(struct platform_device *pdev)
 		iio_triggered_buffer_cleanup(indio_dev);
 	}
 	free_irq(xadc->irq, indio_dev);
+	cancel_delayed_work_sync(&xadc->zynq_unmask_work);
 	clk_disable_unprepare(xadc->clk);
-	cancel_delayed_work(&xadc->zynq_unmask_work);
 	kfree(xadc->data);
 	kfree(indio_dev->channels);
 

drivers/iio/chemical/Kconfig

@@ -64,6 +64,7 @@ config IAQCORE
 config PMS7003
 	tristate "Plantower PMS7003 particulate matter sensor"
 	depends on SERIAL_DEV_BUS
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say Y here to build support for the Plantower PMS7003 particulate
 	  matter sensor.
@@ -71,6 +72,19 @@ config PMS7003
 	  To compile this driver as a module, choose M here: the module will
 	  be called pms7003.
 
+config SENSIRION_SGP30
+	tristate "Sensirion SGPxx gas sensors"
+	depends on I2C
+	select CRC8
+	help
+	  Say Y here to build I2C interface support for the following
+	  Sensirion SGP gas sensors:
+	    * SGP30 gas sensor
+	    * SGPC3 low power gas sensor
+
+	  To compile this driver as module, choose M here: the
+	  module will be called sgp30.
+
 config SPS30
 	tristate "SPS30 particulate matter sensor"
 	depends on I2C

drivers/iio/chemical/bme680.h

@@ -2,11 +2,9 @@
 #ifndef BME680_H_
 #define BME680_H_
 
-#define BME680_REG_CHIP_I2C_ID			0xD0
-#define BME680_REG_CHIP_SPI_ID			0x50
+#define BME680_REG_CHIP_ID			0xD0
 #define   BME680_CHIP_ID_VAL			0x61
-#define BME680_REG_SOFT_RESET_I2C		0xE0
-#define BME680_REG_SOFT_RESET_SPI		0x60
+#define BME680_REG_SOFT_RESET			0xE0
 #define   BME680_CMD_SOFTRESET			0xB6
 #define BME680_REG_STATUS			0x73
 #define   BME680_SPI_MEM_PAGE_BIT		BIT(4)

drivers/iio/chemical/bme680_core.c

@@ -63,9 +63,23 @@ struct bme680_data {
 	s32 t_fine;
 };
 
+static const struct regmap_range bme680_volatile_ranges[] = {
+	regmap_reg_range(BME680_REG_MEAS_STAT_0, BME680_REG_GAS_R_LSB),
+	regmap_reg_range(BME680_REG_STATUS, BME680_REG_STATUS),
+	regmap_reg_range(BME680_T2_LSB_REG, BME680_GH3_REG),
+};
+
+static const struct regmap_access_table bme680_volatile_table = {
+	.yes_ranges	= bme680_volatile_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(bme680_volatile_ranges),
+};
+
 const struct regmap_config bme680_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
+	.max_register = 0xef,
+	.volatile_table = &bme680_volatile_table,
+	.cache_type = REGCACHE_RBTREE,
 };
 EXPORT_SYMBOL(bme680_regmap_config);
 
@@ -316,6 +330,10 @@ static s16 bme680_compensate_temp(struct bme680_data *data,
 	s64 var1, var2, var3;
 	s16 calc_temp;
 
+	/* If the calibration is invalid, attempt to reload it */
+	if (!calib->par_t2)
+		bme680_read_calib(data, calib);
+
 	var1 = (adc_temp >> 3) - (calib->par_t1 << 1);
 	var2 = (var1 * calib->par_t2) >> 11;
 	var3 = ((var1 >> 1) * (var1 >> 1)) >> 12;
@@ -583,8 +601,7 @@ static int bme680_gas_config(struct bme680_data *data)
 	return ret;
 }
 
-static int bme680_read_temp(struct bme680_data *data,
-			    int *val, int *val2)
+static int bme680_read_temp(struct bme680_data *data, int *val)
 {
 	struct device *dev = regmap_get_device(data->regmap);
 	int ret;
@@ -617,10 +634,9 @@ static int bme680_read_temp(struct bme680_data *data,
 	 * compensate_press/compensate_humid to get compensated
 	 * pressure/humidity readings.
 	 */
-	if (val && val2) {
-		*val = comp_temp;
-		*val2 = 100;
-		return IIO_VAL_FRACTIONAL;
+	if (val) {
+		*val = comp_temp * 10; /* Centidegrees to millidegrees */
+		return IIO_VAL_INT;
 	}
 
 	return ret;
@@ -635,7 +651,7 @@ static int bme680_read_press(struct bme680_data *data,
 	s32 adc_press;
 
 	/* Read and compensate temperature to get a reading of t_fine */
-	ret = bme680_read_temp(data, NULL, NULL);
+	ret = bme680_read_temp(data, NULL);
 	if (ret < 0)
 		return ret;
 
@@ -668,7 +684,7 @@ static int bme680_read_humid(struct bme680_data *data,
 	u32 comp_humidity;
 
 	/* Read and compensate temperature to get a reading of t_fine */
-	ret = bme680_read_temp(data, NULL, NULL);
+	ret = bme680_read_temp(data, NULL);
 	if (ret < 0)
 		return ret;
 
@@ -761,7 +777,7 @@ static int bme680_read_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_PROCESSED:
 		switch (chan->type) {
 		case IIO_TEMP:
-			return bme680_read_temp(data, val, val2);
+			return bme680_read_temp(data, val);
 		case IIO_PRESSURE:
 			return bme680_read_press(data, val, val2);
 		case IIO_HUMIDITYRELATIVE:
@@ -867,8 +883,28 @@ int bme680_core_probe(struct device *dev, struct regmap *regmap,
 {
 	struct iio_dev *indio_dev;
 	struct bme680_data *data;
+	unsigned int val;
 	int ret;
 
+	ret = regmap_write(regmap, BME680_REG_SOFT_RESET,
+			   BME680_CMD_SOFTRESET);
+	if (ret < 0) {
+		dev_err(dev, "Failed to reset chip\n");
+		return ret;
+	}
+
+	ret = regmap_read(regmap, BME680_REG_CHIP_ID, &val);
+	if (ret < 0) {
+		dev_err(dev, "Error reading chip ID\n");
+		return ret;
+	}
+
+	if (val != BME680_CHIP_ID_VAL) {
+		dev_err(dev, "Wrong chip ID, got %x expected %x\n",
+				val, BME680_CHIP_ID_VAL);
+		return -ENODEV;
+	}
+
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
 	if (!indio_dev)
 		return -ENOMEM;

drivers/iio/chemical/bme680_i2c.c

@@ -23,8 +23,6 @@ static int bme680_i2c_probe(struct i2c_client *client,
 {
 	struct regmap *regmap;
 	const char *name = NULL;
-	unsigned int val;
-	int ret;
 
 	regmap = devm_regmap_init_i2c(client, &bme680_regmap_config);
 	if (IS_ERR(regmap)) {
@@ -33,25 +31,6 @@ static int bme680_i2c_probe(struct i2c_client *client,
 		return PTR_ERR(regmap);
 	}
 
-	ret = regmap_write(regmap, BME680_REG_SOFT_RESET_I2C,
-			   BME680_CMD_SOFTRESET);
-	if (ret < 0) {
-		dev_err(&client->dev, "Failed to reset chip\n");
-		return ret;
-	}
-
-	ret = regmap_read(regmap, BME680_REG_CHIP_I2C_ID, &val);
-	if (ret < 0) {
-		dev_err(&client->dev, "Error reading I2C chip ID\n");
-		return ret;
-	}
-
-	if (val != BME680_CHIP_ID_VAL) {
-		dev_err(&client->dev, "Wrong chip ID, got %x expected %x\n",
-				val, BME680_CHIP_ID_VAL);
-		return -ENODEV;
-	}
-
 	if (id)
 		name = id->name;
 

drivers/iio/chemical/bme680_spi.c

@@ -12,28 +12,93 @@
 
 #include "bme680.h"
 
+struct bme680_spi_bus_context {
+	struct spi_device *spi;
+	u8 current_page;
+};
+
+/*
+ * In SPI mode there are only 7 address bits, a "page" register determines
+ * which part of the 8-bit range is active. This function looks at the address
+ * and writes the page selection bit if needed
+ */
+static int bme680_regmap_spi_select_page(
+	struct bme680_spi_bus_context *ctx, u8 reg)
+{
+	struct spi_device *spi = ctx->spi;
+	int ret;
+	u8 buf[2];
+	u8 page = (reg & 0x80) ? 0 : 1; /* Page "1" is low range */
+
+	if (page == ctx->current_page)
+		return 0;
+
+	/*
+	 * Data sheet claims we're only allowed to change bit 4, so we must do
+	 * a read-modify-write on each and every page select
+	 */
+	buf[0] = BME680_REG_STATUS;
+	ret = spi_write_then_read(spi, buf, 1, buf + 1, 1);
+	if (ret < 0) {
+		dev_err(&spi->dev, "failed to set page %u\n", page);
+		return ret;
+	}
+
+	buf[0] = BME680_REG_STATUS;
+	if (page)
+		buf[1] |= BME680_SPI_MEM_PAGE_BIT;
+	else
+		buf[1] &= ~BME680_SPI_MEM_PAGE_BIT;
+
+	ret = spi_write(spi, buf, 2);
+	if (ret < 0) {
+		dev_err(&spi->dev, "failed to set page %u\n", page);
+		return ret;
+	}
+
+	ctx->current_page = page;
+
+	return 0;
+}
+
 static int bme680_regmap_spi_write(void *context, const void *data,
 				   size_t count)
 {
-	struct spi_device *spi = context;
+	struct bme680_spi_bus_context *ctx = context;
+	struct spi_device *spi = ctx->spi;
+	int ret;
 	u8 buf[2];
 
 	memcpy(buf, data, 2);
+
+	ret = bme680_regmap_spi_select_page(ctx, buf[0]);
+	if (ret)
+		return ret;
+
 	/*
 	 * The SPI register address (= full register address without bit 7)
 	 * and the write command (bit7 = RW = '0')
 	 */
 	buf[0] &= ~0x80;
 
-	return spi_write_then_read(spi, buf, 2, NULL, 0);
+	return spi_write(spi, buf, 2);
 }
 
 static int bme680_regmap_spi_read(void *context, const void *reg,
 				  size_t reg_size, void *val, size_t val_size)
 {
-	struct spi_device *spi = context;
+	struct bme680_spi_bus_context *ctx = context;
+	struct spi_device *spi = ctx->spi;
+	int ret;
+	u8 addr = *(const u8 *)reg;
+
+	ret = bme680_regmap_spi_select_page(ctx, addr);
+	if (ret)
+		return ret;
 
-	return spi_write_then_read(spi, reg, reg_size, val, val_size);
+	addr |= 0x80; /* bit7 = RW = '1' */
+
+	return spi_write_then_read(spi, &addr, 1, val, val_size);
 }
 
 static struct regmap_bus bme680_regmap_bus = {
@@ -46,8 +111,8 @@ static struct regmap_bus bme680_regmap_bus = {
 static int bme680_spi_probe(struct spi_device *spi)
 {
 	const struct spi_device_id *id = spi_get_device_id(spi);
+	struct bme680_spi_bus_context *bus_context;
 	struct regmap *regmap;
-	unsigned int val;
 	int ret;
 
 	spi->bits_per_word = 8;
@@ -57,45 +122,21 @@ static int bme680_spi_probe(struct spi_device *spi)
 		return ret;
 	}
 
+	bus_context = devm_kzalloc(&spi->dev, sizeof(*bus_context), GFP_KERNEL);
+	if (!bus_context)
+		return -ENOMEM;
+
+	bus_context->spi = spi;
+	bus_context->current_page = 0xff; /* Undefined on warm boot */
+
 	regmap = devm_regmap_init(&spi->dev, &bme680_regmap_bus,
-				  &spi->dev, &bme680_regmap_config);
+				  bus_context, &bme680_regmap_config);
 	if (IS_ERR(regmap)) {
 		dev_err(&spi->dev, "Failed to register spi regmap %d\n",
 				(int)PTR_ERR(regmap));
 		return PTR_ERR(regmap);
 	}
 
-	ret = regmap_write(regmap, BME680_REG_SOFT_RESET_SPI,
-			   BME680_CMD_SOFTRESET);
-	if (ret < 0) {
-		dev_err(&spi->dev, "Failed to reset chip\n");
-		return ret;
-	}
-
-	/* after power-on reset, Page 0(0x80-0xFF) of spi_mem_page is active */
-	ret = regmap_read(regmap, BME680_REG_CHIP_SPI_ID, &val);
-	if (ret < 0) {
-		dev_err(&spi->dev, "Error reading SPI chip ID\n");
-		return ret;
-	}
-
-	if (val != BME680_CHIP_ID_VAL) {
-		dev_err(&spi->dev, "Wrong chip ID, got %x expected %x\n",
-				val, BME680_CHIP_ID_VAL);
-		return -ENODEV;
-	}
-	/*
-	 * select Page 1 of spi_mem_page to enable access to
-	 * to registers from address 0x00 to 0x7F.
-	 */
-	ret = regmap_write_bits(regmap, BME680_REG_STATUS,
-				BME680_SPI_MEM_PAGE_BIT,
-				BME680_SPI_MEM_PAGE_1_VAL);
-	if (ret < 0) {
-		dev_err(&spi->dev, "failed to set page 1 of spi_mem_page\n");
-		return ret;
-	}
-
 	return bme680_core_probe(&spi->dev, regmap, id->name);
 }
 

drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c

@@ -103,9 +103,10 @@ static int cros_ec_sensors_read(struct iio_dev *indio_dev,
 			 * Do not use IIO_DEGREE_TO_RAD to avoid precision
 			 * loss. Round to the nearest integer.
 			 */
-			*val = div_s64(val64 * 314159 + 9000000ULL, 1000);
-			*val2 = 18000 << (CROS_EC_SENSOR_BITS - 1);
-			ret = IIO_VAL_FRACTIONAL;
+			*val = 0;
+			*val2 = div_s64(val64 * 3141592653ULL,
+					180 << (CROS_EC_SENSOR_BITS - 1));
+			ret = IIO_VAL_INT_PLUS_NANO;
 			break;
 		case MOTIONSENSE_TYPE_MAG:
 			/*

drivers/iio/dac/mcp4725.c

@@ -92,6 +92,7 @@ static ssize_t mcp4725_store_eeprom(struct device *dev,
 
 	inoutbuf[0] = 0x60; /* write EEPROM */
 	inoutbuf[0] |= data->ref_mode << 3;
+	inoutbuf[0] |= data->powerdown ? ((data->powerdown_mode + 1) << 1) : 0;
 	inoutbuf[1] = data->dac_value >> 4;
 	inoutbuf[2] = (data->dac_value & 0xf) << 4;
 

drivers/iio/gyro/bmg160_core.c

@@ -582,11 +582,10 @@ static int bmg160_read_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
 		return bmg160_get_filter(data, val);
 	case IIO_CHAN_INFO_SCALE:
-		*val = 0;
 		switch (chan->type) {
 		case IIO_TEMP:
-			*val2 = 500000;
-			return IIO_VAL_INT_PLUS_MICRO;
+			*val = 500;
+			return IIO_VAL_INT;
 		case IIO_ANGL_VEL:
 		{
 			int i;
@@ -594,6 +593,7 @@ static int bmg160_read_raw(struct iio_dev *indio_dev,
 			for (i = 0; i < ARRAY_SIZE(bmg160_scale_table); ++i) {
 				if (bmg160_scale_table[i].dps_range ==
 							data->dps_range) {
+					*val = 0;
 					*val2 = bmg160_scale_table[i].scale;
 					return IIO_VAL_INT_PLUS_MICRO;
 				}

drivers/iio/gyro/mpu3050-core.c

@@ -29,7 +29,8 @@
 
 #include "mpu3050.h"
 
-#define MPU3050_CHIP_ID		0x69
+#define MPU3050_CHIP_ID		0x68
+#define MPU3050_CHIP_ID_MASK	0x7E
 
 /*
  * Register map: anything suffixed *_H is a big-endian high byte and always
@@ -1176,8 +1177,9 @@ int mpu3050_common_probe(struct device *dev,
 		goto err_power_down;
 	}
 
-	if (val != MPU3050_CHIP_ID) {
-		dev_err(dev, "unsupported chip id %02x\n", (u8)val);
+	if ((val & MPU3050_CHIP_ID_MASK) != MPU3050_CHIP_ID) {
+		dev_err(dev, "unsupported chip id %02x\n",
+				(u8)(val & MPU3050_CHIP_ID_MASK));
 		ret = -ENODEV;
 		goto err_power_down;
 	}

drivers/iio/industrialio-buffer.c

@@ -320,9 +320,8 @@ static int iio_scan_mask_set(struct iio_dev *indio_dev,
 	const unsigned long *mask;
 	unsigned long *trialmask;
 
-	trialmask = kmalloc_array(BITS_TO_LONGS(indio_dev->masklength),
-				  sizeof(*trialmask),
-				  GFP_KERNEL);
+	trialmask = kcalloc(BITS_TO_LONGS(indio_dev->masklength),
+			    sizeof(*trialmask), GFP_KERNEL);
 	if (trialmask == NULL)
 		return -ENOMEM;
 	if (!indio_dev->masklength) {

drivers/iio/industrialio-core.c

@@ -1743,10 +1743,10 @@ EXPORT_SYMBOL(__iio_device_register);
  **/
 void iio_device_unregister(struct iio_dev *indio_dev)
 {
-	mutex_lock(&indio_dev->info_exist_lock);
-
 	cdev_device_del(&indio_dev->chrdev, &indio_dev->dev);
 
+	mutex_lock(&indio_dev->info_exist_lock);
+
 	iio_device_unregister_debugfs(indio_dev);
 
 	iio_disable_all_buffers(indio_dev);

drivers/staging/comedi/drivers/ni_usb6501.c

@@ -463,10 +463,8 @@ static int ni6501_alloc_usb_buffers(struct comedi_device *dev)
 
 	size = usb_endpoint_maxp(devpriv->ep_tx);
 	devpriv->usb_tx_buf = kzalloc(size, GFP_KERNEL);
-	if (!devpriv->usb_tx_buf) {
-		kfree(devpriv->usb_rx_buf);
+	if (!devpriv->usb_tx_buf)
 		return -ENOMEM;
-	}
 
 	return 0;
 }
@@ -518,6 +516,9 @@ static int ni6501_auto_attach(struct comedi_device *dev,
 	if (!devpriv)
 		return -ENOMEM;
 
+	mutex_init(&devpriv->mut);
+	usb_set_intfdata(intf, devpriv);
+
 	ret = ni6501_find_endpoints(dev);
 	if (ret)
 		return ret;
@@ -526,9 +527,6 @@ static int ni6501_auto_attach(struct comedi_device *dev,
 	if (ret)
 		return ret;
 
-	mutex_init(&devpriv->mut);
-	usb_set_intfdata(intf, devpriv);
-
 	ret = comedi_alloc_subdevices(dev, 2);
 	if (ret)
 		return ret;

drivers/staging/comedi/drivers/vmk80xx.c

@@ -682,10 +682,8 @@ static int vmk80xx_alloc_usb_buffers(struct comedi_device *dev)
 
 	size = usb_endpoint_maxp(devpriv->ep_tx);
 	devpriv->usb_tx_buf = kzalloc(size, GFP_KERNEL);
-	if (!devpriv->usb_tx_buf) {
-		kfree(devpriv->usb_rx_buf);
+	if (!devpriv->usb_tx_buf)
 		return -ENOMEM;
-	}
 
 	return 0;
 }
@@ -800,6 +798,8 @@ static int vmk80xx_auto_attach(struct comedi_device *dev,
 
 	devpriv->model = board->model;
 
+	sema_init(&devpriv->limit_sem, 8);
+
 	ret = vmk80xx_find_usb_endpoints(dev);
 	if (ret)
 		return ret;
@@ -808,8 +808,6 @@ static int vmk80xx_auto_attach(struct comedi_device *dev,
 	if (ret)
 		return ret;
 
-	sema_init(&devpriv->limit_sem, 8);
-
 	usb_set_intfdata(intf, devpriv);
 
 	if (devpriv->model == VMK8055_MODEL)

drivers/staging/erofs/data.c

@@ -298,7 +298,7 @@ static inline struct bio *erofs_read_raw_page(struct bio *bio,
 	*last_block = current_block;
 
 	/* shift in advance in case of it followed by too many gaps */
-	if (unlikely(bio->bi_vcnt >= bio->bi_max_vecs)) {
+	if (bio->bi_iter.bi_size >= bio->bi_max_vecs * PAGE_SIZE) {
 		/* err should reassign to 0 after submitting */
 		err = 0;
 		goto submit_bio_out;

drivers/staging/iio/adc/ad7192.c

@@ -109,10 +109,10 @@
 #define AD7192_CH_AIN3		BIT(6) /* AIN3 - AINCOM */
 #define AD7192_CH_AIN4		BIT(7) /* AIN4 - AINCOM */
 
-#define AD7193_CH_AIN1P_AIN2M	0x000  /* AIN1(+) - AIN2(-) */
-#define AD7193_CH_AIN3P_AIN4M	0x001  /* AIN3(+) - AIN4(-) */
-#define AD7193_CH_AIN5P_AIN6M	0x002  /* AIN5(+) - AIN6(-) */
-#define AD7193_CH_AIN7P_AIN8M	0x004  /* AIN7(+) - AIN8(-) */
+#define AD7193_CH_AIN1P_AIN2M	0x001  /* AIN1(+) - AIN2(-) */
+#define AD7193_CH_AIN3P_AIN4M	0x002  /* AIN3(+) - AIN4(-) */
+#define AD7193_CH_AIN5P_AIN6M	0x004  /* AIN5(+) - AIN6(-) */
+#define AD7193_CH_AIN7P_AIN8M	0x008  /* AIN7(+) - AIN8(-) */
 #define AD7193_CH_TEMP		0x100 /* Temp senseor */
 #define AD7193_CH_AIN2P_AIN2M	0x200 /* AIN2(+) - AIN2(-) */
 #define AD7193_CH_AIN1		0x401 /* AIN1 - AINCOM */

drivers/staging/iio/meter/ade7854.c

@@ -269,7 +269,7 @@ static IIO_DEV_ATTR_VPEAK(0644,
 static IIO_DEV_ATTR_IPEAK(0644,
 		ade7854_read_32bit,
 		ade7854_write_32bit,
-		ADE7854_VPEAK);
+		ADE7854_IPEAK);
 static IIO_DEV_ATTR_APHCAL(0644,
 		ade7854_read_16bit,
 		ade7854_write_16bit,

drivers/staging/most/core.c

@@ -1431,7 +1431,7 @@ int most_register_interface(struct most_interface *iface)
 
 	INIT_LIST_HEAD(&iface->p->channel_list);
 	iface->p->dev_id = id;
-	snprintf(iface->p->name, STRING_SIZE, "mdev%d", id);
+	strcpy(iface->p->name, iface->description);
 	iface->dev.init_name = iface->p->name;
 	iface->dev.bus = &mc.bus;
 	iface->dev.parent = &mc.dev;