powerpc/mm: Use symbolic constants for filtering SRR1 bits on ISIs

This uses the newly defined constants for this rather than open-coded
numbers. There is a side effect on 64-bit which is to pass through
some of the new P9 bits which we didn't before.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

arch/powerpc/kernel/exceptions-64s.S

@@ -541,7 +541,7 @@ EXC_COMMON_BEGIN(instruction_access_common)
 	RECONCILE_IRQ_STATE(r10, r11)
 	ld	r12,_MSR(r1)
 	ld	r3,_NIP(r1)
-	andis.	r4,r12,0x5820
+	andis.	r4,r12,DSISR_BAD_FAULT_64S@h
 	li	r5,0x400
 	std	r3,_DAR(r1)
 	std	r4,_DSISR(r1)

arch/powerpc/kernel/head_32.S

@@ -403,13 +403,13 @@ DataAccess:
 	DO_KVM  0x400
 InstructionAccess:
 	EXCEPTION_PROLOG
-	andis.	r0,r9,0x4000		/* no pte found? */
+	andis.	r0,r9,SRR1_ISI_NOPT@h	/* no pte found? */
 	beq	1f			/* if so, try to put a PTE */
 	li	r3,0			/* into the hash table */
 	mr	r4,r12			/* SRR0 is fault address */
 	bl	hash_page
 1:	mr	r4,r12
-	andis.	r5,r9,0x4820		/* Filter relevant SRR1 bits */
+	andis.	r5,r9,DSISR_SRR1_MATCH_32S@h /* Filter relevant SRR1 bits */
 	EXC_XFER_LITE(0x400, handle_page_fault)
 
 /* External interrupt */

arch/powerpc/kernel/head_8xx.S

@@ -569,8 +569,8 @@ _ENTRY(DTLBMiss_jmp)
 InstructionTLBError:
 	EXCEPTION_PROLOG
 	mr	r4,r12
-	andis.	r5,r9,0x4820		/* Filter relevant SRR1 bits */
-	andis.	r10,r9,0x4000
+	andis.	r5,r9,DSISR_SRR1_MATCH_32S@h /* Filter relevant SRR1 bits */
+	andis.	r10,r9,SRR1_ISI_NOPT@h
 	beq+	1f
 	tlbie	r4
 itlbie: