Skip to content

L
linux
Commit b5206660 authored by Pete Zaitcev's avatar Pete Zaitcev Committed by Greg Kroah-Hartman
Browse files
Options

[PATCH] USB: Band-aid for mct_u232 in 2.6.1 

On Sun, 18 Jan 2004 00:37:44 -0800
Pete Zaitcev <zaitcev@redhat.com> wrote:

> My Magic Control Technology adapter causes an oops in the following way.
> Connect the thing, run "cat < /dev/ttyUSB0", disconnect, kill cat with ^C.
> The result looks like this:

I played with it a little more, and pretty much got everything working,
thus fixing two Fedora bugs.
 https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=112889
 https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=113700
parent 701e91c8
Hide whitespace changes
Inline Side-by-side
Showing with 123 additions and 124 deletions
drivers/usb/serial/mct_u232.c
View file @ b5206660
......@@ -184,7 +184,7 @@ static struct usb_serial_device_type mct_u232_device = {
struct mct_u232_private {
spinlock_t lock;
unsigned long control_state; /* Modem Line Setting (TIOCM) */
unsigned int control_state; /* Modem Line Setting (TIOCM) */
unsigned char last_lcr; /* Line Control Register */
unsigned char last_lsr; /* Line Status Register */
unsigned char last_msr; /* Modem Status Register */
......@@ -196,25 +196,49 @@ struct mct_u232_private {
#define WDR_TIMEOUT (HZ * 5 ) /* default urb timeout */
/*
* Later day 2.6.0-test kernels have new baud rates like B230400 which
* we do not know how to support. We ignore them for the moment.
* XXX Rate-limit the error message, it's user triggerable.
*/
static int mct_u232_calculate_baud_rate(struct usb_serial *serial, int value) {
if (serial->dev->descriptor.idProduct == MCT_U232_SITECOM_PID
|| serial->dev->descriptor.idProduct == MCT_U232_BELKIN_F5U109_PID) {
switch (value) {
case 300: return 0x01;
case 600: return 0x02; /* this one not tested */
case 1200: return 0x03;
case 2400: return 0x04;
case 4800: return 0x06;
case 9600: return 0x08;
case 19200: return 0x09;
case 38400: return 0x0a;
case 57600: return 0x0b;
case 115200: return 0x0c;
default: return -1; /* normally not reached */
case B300: return 0x01;
case B600: return 0x02; /* this one not tested */
case B1200: return 0x03;
case B2400: return 0x04;
case B4800: return 0x06;
case B9600: return 0x08;
case B19200: return 0x09;
case B38400: return 0x0a;
case B57600: return 0x0b;
case B115200: return 0x0c;
default:
err("MCT USB-RS232: unsupported baudrate request 0x%x,"
" using default of B9600", value);
return 0x08;
}
} else {
switch (value) {
case B300: value = 300;
case B600: value = 600;
case B1200: value = 1200;
case B2400: value = 2400;
case B4800: value = 4800;
case B9600: value = 9600;
case B19200: value = 19200;
case B38400: value = 38400;
case B57600: value = 57600;
case B115200: value = 115200;
default:
err("MCT USB-RS232: unsupported baudrate request 0x%x,"
" using default of B9600", value);
value = 9600;
}
return 115200/value;
}
else
return MCT_U232_BAUD_RATE(value);
}
static int mct_u232_set_baud_rate(struct usb_serial *serial, int value)
......@@ -222,7 +246,9 @@ static int mct_u232_set_baud_rate(struct usb_serial *serial, int value)
unsigned int divisor;
int rc;
unsigned char zero_byte = 0;
divisor = cpu_to_le32(mct_u232_calculate_baud_rate(serial, value));
rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
MCT_U232_SET_BAUD_RATE_REQUEST,
MCT_U232_SET_REQUEST_TYPE,
......@@ -230,7 +256,7 @@ static int mct_u232_set_baud_rate(struct usb_serial *serial, int value)
WDR_TIMEOUT);
if (rc < 0)
err("Set BAUD RATE %d failed (error = %d)", value, rc);
dbg("set_baud_rate: value: %d, divisor: 0x%x", value, divisor);
dbg("set_baud_rate: value: 0x%x, divisor: 0x%x", value, divisor);
/* Mimic the MCT-supplied Windows driver (version 1.21P.0104), which
always sends two extra USB 'device request' messages after the
......@@ -278,7 +304,7 @@ static int mct_u232_set_line_ctrl(struct usb_serial *serial, unsigned char lcr)
} /* mct_u232_set_line_ctrl */
static int mct_u232_set_modem_ctrl(struct usb_serial *serial,
unsigned long control_state)
unsigned int control_state)
{
int rc;
unsigned char mcr = MCT_U232_MCR_NONE;
......@@ -295,7 +321,7 @@ static int mct_u232_set_modem_ctrl(struct usb_serial *serial,
WDR_TIMEOUT);
if (rc < 0)
err("Set MODEM CTRL 0x%x failed (error = %d)", mcr, rc);
dbg("set_modem_ctrl: state=0x%lx ==> mcr=0x%x", control_state, mcr);
dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr);
return rc;
} /* mct_u232_set_modem_ctrl */
......@@ -316,7 +342,7 @@ static int mct_u232_get_modem_stat(struct usb_serial *serial, unsigned char *msr
return rc;
} /* mct_u232_get_modem_stat */
static void mct_u232_msr_to_state(unsigned long *control_state, unsigned char msr)
static void mct_u232_msr_to_state(unsigned int *control_state, unsigned char msr)
{
/* Translate Control Line states */
if (msr & MCT_U232_MSR_DSR)
......@@ -335,7 +361,7 @@ static void mct_u232_msr_to_state(unsigned long *control_state, unsigned char ms
*control_state |= TIOCM_CD;
else
*control_state &= ~TIOCM_CD;
dbg("msr_to_state: msr=0x%x ==> state=0x%lx", msr, *control_state);
dbg("msr_to_state: msr=0x%x ==> state=0x%x", msr, *control_state);
} /* mct_u232_msr_to_state */
/*
......@@ -345,6 +371,7 @@ static void mct_u232_msr_to_state(unsigned long *control_state, unsigned char ms
static int mct_u232_startup (struct usb_serial *serial)
{
struct mct_u232_private *priv;
struct usb_serial_port *port, *rport;
/* allocate the private data structure */
priv = kmalloc(sizeof(struct mct_u232_private), GFP_KERNEL);
......@@ -359,6 +386,17 @@ static int mct_u232_startup (struct usb_serial *serial)
init_waitqueue_head(&serial->port[0]->write_wait);
/* Puh, that's dirty */
port = serial->port[0];
rport = serial->port[1];
if (port->read_urb) {
/* No unlinking, it wasn't submitted yet. */
usb_free_urb(port->read_urb);
}
port->read_urb = rport->interrupt_in_urb;
rport->interrupt_in_urb = NULL;
port->read_urb->context = port;
return (0);
} /* mct_u232_startup */
......@@ -383,7 +421,7 @@ static int mct_u232_open (struct usb_serial_port *port, struct file *filp)
struct usb_serial *serial = port->serial;
struct mct_u232_private *priv = usb_get_serial_port_data(port);
int retval = 0;
unsigned long control_state;
unsigned int control_state;
unsigned long flags;
unsigned char last_lcr;
unsigned char last_msr;
......@@ -425,15 +463,6 @@ static int mct_u232_open (struct usb_serial_port *port, struct file *filp)
mct_u232_msr_to_state(&priv->control_state, priv->last_msr);
spin_unlock_irqrestore(&priv->lock, flags);
{
/* Puh, that's dirty */
struct usb_serial_port *rport;
rport = serial->port[1];
rport->tty = port->tty;
usb_set_serial_port_data(rport, usb_get_serial_port_data(port));
port->read_urb = rport->interrupt_in_urb;
}
port->read_urb->dev = port->serial->dev;
retval = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (retval) {
......@@ -662,129 +691,97 @@ static void mct_u232_read_int_callback (struct urb *urb, struct pt_regs *regs)
__FUNCTION__, status);
} /* mct_u232_read_int_callback */
static void mct_u232_set_termios (struct usb_serial_port *port,
struct termios *old_termios)
{
struct usb_serial *serial = port->serial;
struct mct_u232_private *priv = usb_get_serial_port_data(port);
unsigned int iflag = port->tty->termios->c_iflag;
unsigned int old_iflag = old_termios->c_iflag;
unsigned int cflag = port->tty->termios->c_cflag;
unsigned int old_cflag = old_termios->c_cflag;
unsigned long flags;
unsigned long control_state;
unsigned int control_state, new_state;
unsigned char last_lcr;
/* get a local copy of the current port settings */
spin_lock_irqsave(&priv->lock, flags);
control_state = priv->control_state;
last_lcr = priv->last_lcr;
spin_unlock_irqrestore(&priv->lock, flags);
last_lcr = 0;
/*
* Update baud rate
* Update baud rate.
* Do not attempt to cache old rates and skip settings,
* disconnects screw such tricks up completely.
* Premature optimization is the root of all evil.
*/
if( (cflag & CBAUD) != (old_cflag & CBAUD) ) {
/* reassert DTR and (maybe) RTS on transition from B0 */
if( (old_cflag & CBAUD) == B0 ) {
dbg("%s: baud was B0", __FUNCTION__);
control_state |= TIOCM_DTR;
/* don't set RTS if using hardware flow control */
if (!(old_cflag & CRTSCTS)) {
control_state |= TIOCM_RTS;
}
mct_u232_set_modem_ctrl(serial, control_state);
}
switch(cflag & CBAUD) {
case B0: /* handled below */
break;
case B300: mct_u232_set_baud_rate(serial, 300);
break;
case B600: mct_u232_set_baud_rate(serial, 600);
break;
case B1200: mct_u232_set_baud_rate(serial, 1200);
break;
case B2400: mct_u232_set_baud_rate(serial, 2400);
break;
case B4800: mct_u232_set_baud_rate(serial, 4800);
break;
case B9600: mct_u232_set_baud_rate(serial, 9600);
break;
case B19200: mct_u232_set_baud_rate(serial, 19200);
break;
case B38400: mct_u232_set_baud_rate(serial, 38400);
break;
case B57600: mct_u232_set_baud_rate(serial, 57600);
break;
case B115200: mct_u232_set_baud_rate(serial, 115200);
break;
default: err("MCT USB-RS232 converter: unsupported baudrate request, using default of 9600");
mct_u232_set_baud_rate(serial, 9600); break;
}
if ((cflag & CBAUD) == B0 ) {
dbg("%s: baud is B0", __FUNCTION__);
/* Drop RTS and DTR */
control_state &= ~(TIOCM_DTR | TIOCM_RTS);
mct_u232_set_modem_ctrl(serial, control_state);
/* reassert DTR and (maybe) RTS on transition from B0 */
if ((old_cflag & CBAUD) == B0) {
dbg("%s: baud was B0", __FUNCTION__);
control_state |= TIOCM_DTR;
/* don't set RTS if using hardware flow control */
if (!(old_cflag & CRTSCTS)) {
control_state |= TIOCM_RTS;
}
mct_u232_set_modem_ctrl(serial, control_state);
}
mct_u232_set_baud_rate(serial, cflag & CBAUD);
if ((cflag & CBAUD) == B0 ) {
dbg("%s: baud is B0", __FUNCTION__);
/* Drop RTS and DTR */
control_state &= ~(TIOCM_DTR | TIOCM_RTS);
mct_u232_set_modem_ctrl(serial, control_state);
}
/*
* Update line control register (LCR)
*/
if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))
|| (cflag & CSIZE) != (old_cflag & CSIZE)
|| (cflag & CSTOPB) != (old_cflag & CSTOPB) ) {
last_lcr = 0;
/* set the parity */
if (cflag & PARENB)
last_lcr |= (cflag & PARODD) ?
MCT_U232_PARITY_ODD : MCT_U232_PARITY_EVEN;
else
last_lcr |= MCT_U232_PARITY_NONE;
/* set the number of data bits */
switch (cflag & CSIZE) {
case CS5:
last_lcr |= MCT_U232_DATA_BITS_5; break;
case CS6:
last_lcr |= MCT_U232_DATA_BITS_6; break;
case CS7:
last_lcr |= MCT_U232_DATA_BITS_7; break;
case CS8:
last_lcr |= MCT_U232_DATA_BITS_8; break;
default:
err("CSIZE was not CS5-CS8, using default of 8");
last_lcr |= MCT_U232_DATA_BITS_8;
break;
}
/* set the parity */
if (cflag & PARENB)
last_lcr |= (cflag & PARODD) ?
MCT_U232_PARITY_ODD : MCT_U232_PARITY_EVEN;
else
last_lcr |= MCT_U232_PARITY_NONE;
/* set the number of data bits */
switch (cflag & CSIZE) {
case CS5:
last_lcr |= MCT_U232_DATA_BITS_5; break;
case CS6:
last_lcr |= MCT_U232_DATA_BITS_6; break;
case CS7:
last_lcr |= MCT_U232_DATA_BITS_7; break;
case CS8:
last_lcr |= MCT_U232_DATA_BITS_8; break;
default:
err("CSIZE was not CS5-CS8, using default of 8");
last_lcr |= MCT_U232_DATA_BITS_8;
break;
}
/* set the number of stop bits */
last_lcr |= (cflag & CSTOPB) ?
MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1;
/* set the number of stop bits */
last_lcr |= (cflag & CSTOPB) ?
MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1;
mct_u232_set_line_ctrl(serial, last_lcr);
mct_u232_set_line_ctrl(serial, last_lcr);
}
/*
* Set flow control: well, I do not really now how to handle DTR/RTS.
* Just do what we have seen with SniffUSB on Win98.
*/
if( (iflag & IXOFF) != (old_iflag & IXOFF)
|| (iflag & IXON) != (old_iflag & IXON)
|| (cflag & CRTSCTS) != (old_cflag & CRTSCTS) ) {
/* Drop DTR/RTS if no flow control otherwise assert */
if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS) )
control_state |= TIOCM_DTR | TIOCM_RTS;
else
control_state &= ~(TIOCM_DTR | TIOCM_RTS);
/* Drop DTR/RTS if no flow control otherwise assert */
new_state = control_state;
if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS))
new_state |= TIOCM_DTR | TIOCM_RTS;
else
new_state &= ~(TIOCM_DTR | TIOCM_RTS);
if (new_state != control_state) {
mct_u232_set_modem_ctrl(serial, control_state);
control_state = new_state;
}
/* save off the modified port settings */
......@@ -794,7 +791,6 @@ static void mct_u232_set_termios (struct usb_serial_port *port,
spin_unlock_irqrestore(&priv->lock, flags);
} /* mct_u232_set_termios */
static void mct_u232_break_ctl( struct usb_serial_port *port, int break_state )
{
struct usb_serial *serial = port->serial;
......@@ -818,7 +814,7 @@ static void mct_u232_break_ctl( struct usb_serial_port *port, int break_state )
static int mct_u232_tiocmget (struct usb_serial_port *port, struct file *file)
{
struct mct_u232_private *priv = usb_get_serial_port_data(port);
unsigned long control_state;
unsigned int control_state;
unsigned long flags;
dbg("%s", __FUNCTION__);
......@@ -835,7 +831,7 @@ static int mct_u232_tiocmset (struct usb_serial_port *port, struct file *file,
{
struct usb_serial *serial = port->serial;
struct mct_u232_private *priv = usb_get_serial_port_data(port);
unsigned long control_state;
unsigned int control_state;
unsigned long flags;
dbg("%s", __FUNCTION__);
......
drivers/usb/serial/mct_u232.h
View file @ b5206660
......@@ -74,8 +74,11 @@
/*
* Baud rate (divisor)
* Actually, there are two of them, MCT website calls them "Philips solution"
* and "Intel solution". They are the regular MCT and "Sitecom" for us.
* This is pointless to document in the header, see the code for the bits.
*/
#define MCT_U232_BAUD_RATE(b) (115200/b)
static int mct_u232_calculate_baud_rate(struct usb_serial *serial, int value);
/*
* Line Control Register (LCR)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7