x86, platforms: Remove NUMAQ

The NUMAQ support seems to be unmaintained, remove it.

Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: David Rientjes <rientjes@google.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/n/530CFD6C.7040705@zytor.com

arch/x86/Kconfig

@@ -346,7 +346,6 @@ config X86_EXTENDED_PLATFORM
 	  for the following (non-PC) 32 bit x86 platforms:
 		Goldfish (Android emulator)
 		AMD Elan
-		NUMAQ (IBM/Sequent)
 		RDC R-321x SoC
 		SGI 320/540 (Visual Workstation)
 		STA2X11-based (e.g. Northville)
@@ -487,32 +486,18 @@ config X86_32_NON_STANDARD
 	depends on X86_32 && SMP
 	depends on X86_EXTENDED_PLATFORM
 	---help---
-	  This option compiles in the NUMAQ, bigsmp, and STA2X11 default
-	  subarchitectures.  It is intended for a generic binary kernel. If you
-	  select them all, kernel will probe it one by one and will fallback to
-	  default.
+	  This option compiles in the bigsmp and STA2X11 default
+	  subarchitectures.  It is intended for a generic binary
+	  kernel. If you select them all, kernel will probe it one by
+	  one and will fallback to default.
 
 # Alphabetically sorted list of Non standard 32 bit platforms
 
-config X86_NUMAQ
-	bool "NUMAQ (IBM/Sequent)"
-	depends on X86_32_NON_STANDARD
-	depends on PCI
-	select NUMA
-	select X86_MPPARSE
-	---help---
-	  This option is used for getting Linux to run on a NUMAQ (IBM/Sequent)
-	  NUMA multiquad box. This changes the way that processors are
-	  bootstrapped, and uses Clustered Logical APIC addressing mode instead
-	  of Flat Logical.  You will need a new lynxer.elf file to flash your
-	  firmware with - send email to <Martin.Bligh@us.ibm.com>.
-
 config X86_SUPPORTS_MEMORY_FAILURE
 	def_bool y
 	# MCE code calls memory_failure():
 	depends on X86_MCE
 	# On 32-bit this adds too big of NODES_SHIFT and we run out of page flags:
-	depends on !X86_NUMAQ
 	# On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH:
 	depends on X86_64 || !SPARSEMEM
 	select ARCH_SUPPORTS_MEMORY_FAILURE
@@ -783,7 +768,7 @@ config NR_CPUS
 	range 2 8192 if SMP && !MAXSMP && CPUMASK_OFFSTACK && X86_64
 	default "1" if !SMP
 	default "8192" if MAXSMP
-	default "32" if SMP && (X86_NUMAQ || X86_BIGSMP)
+	default "32" if SMP && X86_BIGSMP
 	default "8" if SMP
 	---help---
 	  This allows you to specify the maximum number of CPUs which this
@@ -1064,13 +1049,11 @@ config X86_CPUID
 
 choice
 	prompt "High Memory Support"
-	default HIGHMEM64G if X86_NUMAQ
 	default HIGHMEM4G
 	depends on X86_32
 
 config NOHIGHMEM
 	bool "off"
-	depends on !X86_NUMAQ
 	---help---
 	  Linux can use up to 64 Gigabytes of physical memory on x86 systems.
 	  However, the address space of 32-bit x86 processors is only 4
@@ -1107,7 +1090,6 @@ config NOHIGHMEM
 
 config HIGHMEM4G
 	bool "4GB"
-	depends on !X86_NUMAQ
 	---help---
 	  Select this if you have a 32-bit processor and between 1 and 4
 	  gigabytes of physical RAM.
@@ -1199,8 +1181,8 @@ config DIRECT_GBPAGES
 config NUMA
 	bool "Numa Memory Allocation and Scheduler Support"
 	depends on SMP
-	depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP))
-	default y if (X86_NUMAQ || X86_BIGSMP)
+	depends on X86_64 || (X86_32 && HIGHMEM64G && X86_BIGSMP)
+	default y if X86_BIGSMP
 	---help---
 	  Enable NUMA (Non Uniform Memory Access) support.
 
@@ -1211,8 +1193,7 @@ config NUMA
 	  For 64-bit this is recommended if the system is Intel Core i7
 	  (or later), AMD Opteron, or EM64T NUMA.
 
-	  For 32-bit this is only needed on (rare) 32-bit-only platforms
-	  that support NUMA topologies, such as NUMAQ, or if you boot a 32-bit
+	  For 32-bit this is only needed if you boot a 32-bit
 	  kernel on a 64-bit NUMA platform.
 
 	  Otherwise, you should say N.
@@ -1258,7 +1239,6 @@ config NODES_SHIFT
 	range 1 10
 	default "10" if MAXSMP
 	default "6" if X86_64
-	default "4" if X86_NUMAQ
 	default "3"
 	depends on NEED_MULTIPLE_NODES
 	---help---

arch/x86/Kconfig.cpu

@@ -363,7 +363,7 @@ config X86_P6_NOP
 
 config X86_TSC
 	def_bool y
-	depends on ((MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2 || MATOM) && !X86_NUMAQ) || X86_64
+	depends on (MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2 || MATOM) || X86_64
 
 config X86_CMPXCHG64
 	def_bool y

arch/x86/include/asm/mmzone_32.h

@@ -11,9 +11,6 @@
 #ifdef CONFIG_NUMA
 extern struct pglist_data *node_data[];
 #define NODE_DATA(nid)	(node_data[nid])
-
-#include <asm/numaq.h>
-
 #endif /* CONFIG_NUMA */
 
 #ifdef CONFIG_DISCONTIGMEM

arch/x86/include/asm/mpspec.h

@@ -25,12 +25,6 @@ extern int pic_mode;
 
 extern unsigned int def_to_bigsmp;
 
-#ifdef CONFIG_X86_NUMAQ
-extern int mp_bus_id_to_node[MAX_MP_BUSSES];
-extern int mp_bus_id_to_local[MAX_MP_BUSSES];
-extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
-#endif
-
 #else /* CONFIG_X86_64: */
 
 #define MAX_MP_BUSSES		256

arch/x86/include/asm/numaq.h

-/*
- * Written by: Patricia Gaughen, IBM Corporation
- *
- * Copyright (C) 2002, IBM Corp.
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <gone@us.ibm.com>
- */
-
-#ifndef _ASM_X86_NUMAQ_H
-#define _ASM_X86_NUMAQ_H
-
-#ifdef CONFIG_X86_NUMAQ
-
-extern int found_numaq;
-extern int numaq_numa_init(void);
-extern int pci_numaq_init(void);
-
-extern void *xquad_portio;
-
-#define XQUAD_PORTIO_BASE 0xfe400000
-#define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
-#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
-
-/*
- * SYS_CFG_DATA_PRIV_ADDR, struct eachquadmem, and struct sys_cfg_data are the
- */
-#define SYS_CFG_DATA_PRIV_ADDR		0x0009d000 /* place for scd in private
-						      quad space */
-
-/*
- * Communication area for each processor on lynxer-processor tests.
- *
- * NOTE: If you change the size of this eachproc structure you need
- *       to change the definition for EACH_QUAD_SIZE.
- */
-struct eachquadmem {
-	unsigned int	priv_mem_start;		/* Starting address of this */
-						/* quad's private memory. */
-						/* This is always 0. */
-						/* In MB. */
-	unsigned int	priv_mem_size;		/* Size of this quad's */
-						/* private memory. */
-						/* In MB. */
-	unsigned int	low_shrd_mem_strp_start;/* Starting address of this */
-						/* quad's low shared block */
-						/* (untranslated). */
-						/* In MB. */
-	unsigned int	low_shrd_mem_start;	/* Starting address of this */
-						/* quad's low shared memory */
-						/* (untranslated). */
-						/* In MB. */
-	unsigned int	low_shrd_mem_size;	/* Size of this quad's low */
-						/* shared memory. */
-						/* In MB. */
-	unsigned int	lmmio_copb_start;	/* Starting address of this */
-						/* quad's local memory */
-						/* mapped I/O in the */
-						/* compatibility OPB. */
-						/* In MB. */
-	unsigned int	lmmio_copb_size;	/* Size of this quad's local */
-						/* memory mapped I/O in the */
-						/* compatibility OPB. */
-						/* In MB. */
-	unsigned int	lmmio_nopb_start;	/* Starting address of this */
-						/* quad's local memory */
-						/* mapped I/O in the */
-						/* non-compatibility OPB. */
-						/* In MB. */
-	unsigned int	lmmio_nopb_size;	/* Size of this quad's local */
-						/* memory mapped I/O in the */
-						/* non-compatibility OPB. */
-						/* In MB. */
-	unsigned int	io_apic_0_start;	/* Starting address of I/O */
-						/* APIC 0. */
-	unsigned int	io_apic_0_sz;		/* Size I/O APIC 0. */
-	unsigned int	io_apic_1_start;	/* Starting address of I/O */
-						/* APIC 1. */
-	unsigned int	io_apic_1_sz;		/* Size I/O APIC 1. */
-	unsigned int	hi_shrd_mem_start;	/* Starting address of this */
-						/* quad's high shared memory.*/
-						/* In MB. */
-	unsigned int	hi_shrd_mem_size;	/* Size of this quad's high */
-						/* shared memory. */
-						/* In MB. */
-	unsigned int	mps_table_addr;		/* Address of this quad's */
-						/* MPS tables from BIOS, */
-						/* in system space.*/
-	unsigned int	lcl_MDC_pio_addr;	/* Port-I/O address for */
-						/* local access of MDC. */
-	unsigned int	rmt_MDC_mmpio_addr;	/* MM-Port-I/O address for */
-						/* remote access of MDC. */
-	unsigned int	mm_port_io_start;	/* Starting address of this */
-						/* quad's memory mapped Port */
-						/* I/O space. */
-	unsigned int	mm_port_io_size;	/* Size of this quad's memory*/
-						/* mapped Port I/O space. */
-	unsigned int	mm_rmt_io_apic_start;	/* Starting address of this */
-						/* quad's memory mapped */
-						/* remote I/O APIC space. */
-	unsigned int	mm_rmt_io_apic_size;	/* Size of this quad's memory*/
-						/* mapped remote I/O APIC */
-						/* space. */
-	unsigned int	mm_isa_start;		/* Starting address of this */
-						/* quad's memory mapped ISA */
-						/* space (contains MDC */
-						/* memory space). */
-	unsigned int	mm_isa_size;		/* Size of this quad's memory*/
-						/* mapped ISA space (contains*/
-						/* MDC memory space). */
-	unsigned int	rmt_qmi_addr;		/* Remote addr to access QMI.*/
-	unsigned int	lcl_qmi_addr;		/* Local addr to access QMI. */
-};
-
-/*
- * Note: This structure must be NOT be changed unless the multiproc and
- * OS are changed to reflect the new structure.
- */
-struct sys_cfg_data {
-	unsigned int	quad_id;
-	unsigned int	bsp_proc_id; /* Boot Strap Processor in this quad. */
-	unsigned int	scd_version; /* Version number of this table. */
-	unsigned int	first_quad_id;
-	unsigned int	quads_present31_0; /* 1 bit for each quad */
-	unsigned int	quads_present63_32; /* 1 bit for each quad */
-	unsigned int	config_flags;
-	unsigned int	boot_flags;
-	unsigned int	csr_start_addr; /* Absolute value (not in MB) */
-	unsigned int	csr_size; /* Absolute value (not in MB) */
-	unsigned int	lcl_apic_start_addr; /* Absolute value (not in MB) */
-	unsigned int	lcl_apic_size; /* Absolute value (not in MB) */
-	unsigned int	low_shrd_mem_base; /* 0 or 512MB or 1GB */
-	unsigned int	low_shrd_mem_quad_offset; /* 0,128M,256M,512M,1G */
-					/* may not be totally populated */
-	unsigned int	split_mem_enbl; /* 0 for no low shared memory */
-	unsigned int	mmio_sz; /* Size of total system memory mapped I/O */
-				 /* (in MB). */
-	unsigned int	quad_spin_lock; /* Spare location used for quad */
-					/* bringup. */
-	unsigned int	nonzero55; /* For checksumming. */
-	unsigned int	nonzeroaa; /* For checksumming. */
-	unsigned int	scd_magic_number;
-	unsigned int	system_type;
-	unsigned int	checksum;
-	/*
-	 *	memory configuration area for each quad
-	 */
-	struct		eachquadmem eq[MAX_NUMNODES];	/* indexed by quad id */
-};
-
-void numaq_tsc_disable(void);
-
-#endif /* CONFIG_X86_NUMAQ */
-#endif /* _ASM_X86_NUMAQ_H */
-

arch/x86/kernel/apic/Makefile

@@ -18,7 +18,6 @@ obj-y				+= apic_flat_64.o
 endif
 
 # APIC probe will depend on the listing order here
-obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
 obj-$(CONFIG_X86_BIGSMP)	+= bigsmp_32.o
 
 # For 32bit, probe_32 need to be listed last

arch/x86/kernel/cpu/intel.c

@@ -267,10 +267,6 @@ static void intel_workarounds(struct cpuinfo_x86 *c)
 	}
 #endif
 
-#ifdef CONFIG_X86_NUMAQ
-	numaq_tsc_disable();
-#endif
-
 	intel_smp_check(c);
 }
 #else

arch/x86/mm/numa.c

@@ -687,10 +687,6 @@ static int __init dummy_numa_init(void)
 void __init x86_numa_init(void)
 {
 	if (!numa_off) {
-#ifdef CONFIG_X86_NUMAQ
-		if (!numa_init(numaq_numa_init))
-			return;
-#endif
 #ifdef CONFIG_ACPI_NUMA
 		if (!numa_init(x86_acpi_numa_init))
 			return;

arch/x86/pci/Makefile

@@ -13,7 +13,6 @@ obj-y				+= legacy.o irq.o
 
 obj-$(CONFIG_STA2X11)           += sta2x11-fixup.o
 
-obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
 obj-$(CONFIG_X86_NUMACHIP)	+= numachip.o
 
 obj-$(CONFIG_X86_INTEL_MID)	+= intel_mid_pci.o

arch/x86/pci/numaq_32.c

-/*
- * numaq_32.c - Low-level PCI access for NUMA-Q machines
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/nodemask.h>
-#include <asm/apic.h>
-#include <asm/mpspec.h>
-#include <asm/pci_x86.h>
-#include <asm/numaq.h>
-
-#define BUS2QUAD(global) (mp_bus_id_to_node[global])
-
-#define BUS2LOCAL(global) (mp_bus_id_to_local[global])
-
-#define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
-
-#define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \
-	(0x80000000 | (BUS2LOCAL(bus) << 16) | (devfn << 8) | (reg & ~3))
-
-static void write_cf8(unsigned bus, unsigned devfn, unsigned reg)
-{
-	unsigned val = PCI_CONF1_MQ_ADDRESS(bus, devfn, reg);
-	if (xquad_portio)
-		writel(val, XQUAD_PORT_ADDR(0xcf8, BUS2QUAD(bus)));
-	else
-		outl(val, 0xCF8);
-}
-
-static int pci_conf1_mq_read(unsigned int seg, unsigned int bus,
-			     unsigned int devfn, int reg, int len, u32 *value)
-{
-	unsigned long flags;
-	void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
-
-	WARN_ON(seg);
-	if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
-		return -EINVAL;
-
-	raw_spin_lock_irqsave(&pci_config_lock, flags);
-
-	write_cf8(bus, devfn, reg);
-
-	switch (len) {
-	case 1:
-		if (xquad_portio)
-			*value = readb(adr + (reg & 3));
-		else
-			*value = inb(0xCFC + (reg & 3));
-		break;
-	case 2:
-		if (xquad_portio)
-			*value = readw(adr + (reg & 2));
-		else
-			*value = inw(0xCFC + (reg & 2));
-		break;
-	case 4:
-		if (xquad_portio)
-			*value = readl(adr);
-		else
-			*value = inl(0xCFC);
-		break;
-	}
-
-	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
-
-	return 0;
-}
-
-static int pci_conf1_mq_write(unsigned int seg, unsigned int bus,
-			      unsigned int devfn, int reg, int len, u32 value)
-{
-	unsigned long flags;
-	void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
-
-	WARN_ON(seg);
-	if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255)) 
-		return -EINVAL;
-
-	raw_spin_lock_irqsave(&pci_config_lock, flags);
-
-	write_cf8(bus, devfn, reg);
-
-	switch (len) {
-	case 1:
-		if (xquad_portio)
-			writeb(value, adr + (reg & 3));
-		else
-			outb((u8)value, 0xCFC + (reg & 3));
-		break;
-	case 2:
-		if (xquad_portio)
-			writew(value, adr + (reg & 2));
-		else
-			outw((u16)value, 0xCFC + (reg & 2));
-		break;
-	case 4:
-		if (xquad_portio)
-			writel(value, adr + reg);
-		else
-			outl((u32)value, 0xCFC);
-		break;
-	}
-
-	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
-
-	return 0;
-}
-
-#undef PCI_CONF1_MQ_ADDRESS
-
-static const struct pci_raw_ops pci_direct_conf1_mq = {
-	.read	= pci_conf1_mq_read,
-	.write	= pci_conf1_mq_write
-};
-
-
-static void pci_fixup_i450nx(struct pci_dev *d)
-{
-	/*
-	 * i450NX -- Find and scan all secondary buses on all PXB's.
-	 */
-	int pxb, reg;
-	u8 busno, suba, subb;
-	int quad = BUS2QUAD(d->bus->number);
-
-	dev_info(&d->dev, "searching for i450NX host bridges\n");
-	reg = 0xd0;
-	for(pxb=0; pxb<2; pxb++) {
-		pci_read_config_byte(d, reg++, &busno);
-		pci_read_config_byte(d, reg++, &suba);
-		pci_read_config_byte(d, reg++, &subb);
-		dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n",
-			pxb, busno, suba, subb);
-		if (busno) {
-			/* Bus A */
-			pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno));
-		}
-		if (suba < subb) {
-			/* Bus B */
-			pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, suba+1));
-		}
-	}
-	pcibios_last_bus = -1;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx);
-
-int __init pci_numaq_init(void)
-{
-	int quad;
-
-	raw_pci_ops = &pci_direct_conf1_mq;
-
-	pcibios_scan_root(0);
-	if (num_online_nodes() > 1)
-		for_each_online_node(quad) {
-			if (quad == 0)
-				continue;
-			printk("Scanning PCI bus %d for quad %d\n", 
-				QUADLOCAL2BUS(quad,0), quad);
-			pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, 0));
-		}
-	return 0;
-}