Skip to content

L
linux
Commit b6055787 authored by Alexandre Belloni's avatar Alexandre Belloni
Browse files
Options

ARM: dts: at91: sama5d2: switch to new clock binding 

Switch sama5d2 boards to the new PMC clock bindings.
Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@bootlin.com>
parent dcfc827d
Hide whitespace changes
Inline Side-by-side
Showing with 69 additions and 619 deletions
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
View file @ b6055787
......@@ -165,7 +165,7 @@ i2c2: i2c@600 {
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&flx1_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus_i2c>;
atmel,fifo-size = <16>;
......@@ -211,7 +211,7 @@ uart7: serial@200 {
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&flx3_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
clock-names = "usart";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx3_default>;
......@@ -223,7 +223,7 @@ spi2: spi@400 {
compatible = "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&flx3_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
clock-names = "spi_clk";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx3_default>;
......@@ -240,7 +240,7 @@ uart6: serial@200 {
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&flx4_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
clock-names = "usart";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
......@@ -252,7 +252,7 @@ spi3: spi@400 {
compatible = "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&flx4_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
clock-names = "spi_clk";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
......@@ -268,7 +268,7 @@ i2c3: i2c@600 {
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&flx4_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
atmel,fifo-size = <16>;
......
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
View file @ b6055787
......@@ -197,7 +197,7 @@ i2c2: i2c@600 {
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&flx0_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx0_default>;
atmel,fifo-size = <16>;
......
arch/arm/boot/dts/at91-sama5d2_xplained.dts
View file @ b6055787
......@@ -258,7 +258,7 @@ uart5: serial@200 {
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&flx0_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
clock-names = "usart";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx0_default>;
......@@ -313,7 +313,7 @@ i2c2: i2c@600 {
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&flx4_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
atmel,fifo-size = <16>;
......
arch/arm/boot/dts/sama5d2.dtsi
View file @ b6055787
......@@ -84,7 +84,7 @@ etb {
compatible = "arm,coresight-etb10", "arm,primecell";
reg = <0x740000 0x1000>;
clocks = <&mck>;
clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
clock-names = "apb_pclk";
in-ports {
......@@ -100,7 +100,7 @@ etm {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0x73C000 0x1000>;
clocks = <&mck>;
clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
clock-names = "apb_pclk";
out-ports {
......@@ -154,7 +154,7 @@ usb0: gadget@300000 {
reg = <0x00300000 0x100000
0xfc02c000 0x400>;
interrupts = <42 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&udphs_clk>, <&utmi>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
clock-names = "pclk", "hclk";
status = "disabled";
......@@ -281,7 +281,7 @@ usb1: ohci@400000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00400000 0x100000>;
interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_SYSTEM 6>;
clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
......@@ -290,7 +290,7 @@ usb2: ehci@500000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00500000 0x100000>;
interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&utmi>, <&uhphs_clk>;
clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 41>;
clock-names = "usb_clk", "ehci_clk";
status = "disabled";
};
......@@ -314,7 +314,7 @@ ebi: ebi@10000000 {
0x1 0x0 0x60000000 0x10000000
0x2 0x0 0x70000000 0x10000000
0x3 0x0 0x80000000 0x10000000>;
clocks = <&h32ck>;
clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
status = "disabled";
nand_controller: nand-controller {
......@@ -333,7 +333,7 @@ sdmmc0: sdio-host@a0000000 {
compatible = "atmel,sama5d2-sdhci";
reg = <0xa0000000 0x300>;
interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 31>, <&pmc PMC_TYPE_GCK 31>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
clock-names = "hclock", "multclk", "baseclk";
status = "disabled";
};
......@@ -342,7 +342,7 @@ sdmmc1: sdio-host@b0000000 {
compatible = "atmel,sama5d2-sdhci";
reg = <0xb0000000 0x300>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&sdmmc1_hclk>, <&sdmmc1_gclk>, <&main>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_GCK 32>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
clock-names = "hclock", "multclk", "baseclk";
status = "disabled";
};
......@@ -362,7 +362,7 @@ hlcdc: hlcdc@f0000000 {
compatible = "atmel,sama5d2-hlcdc";
reg = <0xf0000000 0x2000>;
interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
clock-names = "periph_clk","sys_clk", "slow_clk";
status = "disabled";
......@@ -388,7 +388,7 @@ isc: isc@f0008000 {
compatible = "atmel,sama5d2-isc";
reg = <0xf0008000 0x4000>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
clocks = <&isc_clk>, <&iscck>, <&isc_gclk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 18>, <&pmc PMC_TYPE_GCK 46>;
clock-names = "hclock", "iscck", "gck";
#clock-cells = <0>;
clock-output-names = "isc-mck";
......@@ -398,7 +398,7 @@ isc: isc@f0008000 {
ramc0: ramc@f000c000 {
compatible = "atmel,sama5d3-ddramc";
reg = <0xf000c000 0x200>;
clocks = <&ddrck>, <&mpddr_clk>;
clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 13>;
clock-names = "ddrck", "mpddr";
};
......@@ -407,7 +407,7 @@ dma0: dma-controller@f0010000 {
reg = <0xf0010000 0x1000>;
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <1>;
clocks = <&dma0_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
clock-names = "dma_clk";
};
......@@ -417,7 +417,7 @@ dma1: dma-controller@f0004000 {
reg = <0xf0004000 0x1000>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <1>;
clocks = <&dma1_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
clock-names = "dma_clk";
};
......@@ -425,559 +425,9 @@ pmc: pmc@f0014000 {
compatible = "atmel,sama5d2-pmc", "syscon";
reg = <0xf0014000 0x160>;
interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
main_rc_osc: main_rc_osc {
compatible = "atmel,at91sam9x5-clk-main-rc-osc";
#clock-cells = <0>;
interrupt-parent = <&pmc>;
interrupts = <AT91_PMC_MOSCRCS>;
clock-frequency = <12000000>;
clock-accuracy = <100000000>;
};
main_osc: main_osc {
compatible = "atmel,at91rm9200-clk-main-osc";
#clock-cells = <0>;
interrupt-parent = <&pmc>;
interrupts = <AT91_PMC_MOSCS>;
clocks = <&main_xtal>;
};
main: mainck {
compatible = "atmel,at91sam9x5-clk-main";
#clock-cells = <0>;
interrupt-parent = <&pmc>;
interrupts = <AT91_PMC_MOSCSELS>;
clocks = <&main_rc_osc &main_osc>;
};
plla: pllack {
compatible = "atmel,sama5d3-clk-pll";
#clock-cells = <0>;
interrupt-parent = <&pmc>;
interrupts = <AT91_PMC_LOCKA>;
clocks = <&main>;
reg = <0>;
atmel,clk-input-range = <12000000 12000000>;
#atmel,pll-clk-output-range-cells = <4>;
atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>;
};
plladiv: plladivck {
compatible = "atmel,at91sam9x5-clk-plldiv";
#clock-cells = <0>;
clocks = <&plla>;
};
audio_pll_frac: audiopll_fracck {
compatible = "atmel,sama5d2-clk-audio-pll-frac";
#clock-cells = <0>;
clocks = <&main>;
};
audio_pll_pad: audiopll_padck {
compatible = "atmel,sama5d2-clk-audio-pll-pad";
#clock-cells = <0>;
clocks = <&audio_pll_frac>;
};
audio_pll_pmc: audiopll_pmcck {
compatible = "atmel,sama5d2-clk-audio-pll-pmc";
#clock-cells = <0>;
clocks = <&audio_pll_frac>;
};
utmi: utmick {
compatible = "atmel,at91sam9x5-clk-utmi";
#clock-cells = <0>;
interrupt-parent = <&pmc>;
interrupts = <AT91_PMC_LOCKU>;
clocks = <&main>;
};
mck: masterck {
compatible = "atmel,at91sam9x5-clk-master";
#clock-cells = <0>;
interrupt-parent = <&pmc>;
interrupts = <AT91_PMC_MCKRDY>;
clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
atmel,clk-output-range = <124000000 166000000>;
atmel,clk-divisors = <1 2 4 3>;
};
h32ck: h32mxck {
#clock-cells = <0>;
compatible = "atmel,sama5d4-clk-h32mx";
clocks = <&mck>;
};
usb: usbck {
compatible = "atmel,at91sam9x5-clk-usb";
#clock-cells = <0>;
clocks = <&plladiv>, <&utmi>;
};
prog: progck {
compatible = "atmel,at91sam9x5-clk-programmable";
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&pmc>;
clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
prog0: prog0 {
#clock-cells = <0>;
reg = <0>;
interrupts = <AT91_PMC_PCKRDY(0)>;
};
prog1: prog1 {
#clock-cells = <0>;
reg = <1>;
interrupts = <AT91_PMC_PCKRDY(1)>;
};
prog2: prog2 {
#clock-cells = <0>;
reg = <2>;
interrupts = <AT91_PMC_PCKRDY(2)>;
};
};
systemck {
compatible = "atmel,at91rm9200-clk-system";
#address-cells = <1>;
#size-cells = <0>;
ddrck: ddrck {
#clock-cells = <0>;
reg = <2>;
clocks = <&mck>;
};
lcdck: lcdck {
#clock-cells = <0>;
reg = <3>;
clocks = <&mck>;
};
uhpck: uhpck {
#clock-cells = <0>;
reg = <6>;
clocks = <&usb>;
};
udpck: udpck {
#clock-cells = <0>;
reg = <7>;
clocks = <&usb>;
};
pck0: pck0 {
#clock-cells = <0>;
reg = <8>;
clocks = <&prog0>;
};
pck1: pck1 {
#clock-cells = <0>;
reg = <9>;
clocks = <&prog1>;
};
pck2: pck2 {
#clock-cells = <0>;
reg = <10>;
clocks = <&prog2>;
};
iscck: iscck {
#clock-cells = <0>;
reg = <18>;
clocks = <&mck>;
};
};
periph32ck {
compatible = "atmel,at91sam9x5-clk-peripheral";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&h32ck>;
macb0_clk: macb0_clk {
#clock-cells = <0>;
reg = <5>;
atmel,clk-output-range = <0 83000000>;
};
tdes_clk: tdes_clk {
#clock-cells = <0>;
reg = <11>;
atmel,clk-output-range = <0 83000000>;
};
matrix1_clk: matrix1_clk {
#clock-cells = <0>;
reg = <14>;
};
hsmc_clk: hsmc_clk {
#clock-cells = <0>;
reg = <17>;
};
pioA_clk: pioA_clk {
#clock-cells = <0>;
reg = <18>;
atmel,clk-output-range = <0 83000000>;
};
flx0_clk: flx0_clk {
#clock-cells = <0>;
reg = <19>;
atmel,clk-output-range = <0 83000000>;
};
flx1_clk: flx1_clk {
#clock-cells = <0>;
reg = <20>;
atmel,clk-output-range = <0 83000000>;
};
flx2_clk: flx2_clk {
#clock-cells = <0>;
reg = <21>;
atmel,clk-output-range = <0 83000000>;
};
flx3_clk: flx3_clk {
#clock-cells = <0>;
reg = <22>;
atmel,clk-output-range = <0 83000000>;
};
flx4_clk: flx4_clk {
#clock-cells = <0>;
reg = <23>;
atmel,clk-output-range = <0 83000000>;
};
uart0_clk: uart0_clk {
#clock-cells = <0>;
reg = <24>;
atmel,clk-output-range = <0 83000000>;
};
uart1_clk: uart1_clk {
#clock-cells = <0>;
reg = <25>;
atmel,clk-output-range = <0 83000000>;
};
uart2_clk: uart2_clk {
#clock-cells = <0>;
reg = <26>;
atmel,clk-output-range = <0 83000000>;
};
uart3_clk: uart3_clk {
#clock-cells = <0>;
reg = <27>;
atmel,clk-output-range = <0 83000000>;
};
uart4_clk: uart4_clk {
#clock-cells = <0>;
reg = <28>;
atmel,clk-output-range = <0 83000000>;
};
twi0_clk: twi0_clk {
reg = <29>;
#clock-cells = <0>;
atmel,clk-output-range = <0 83000000>;
};
twi1_clk: twi1_clk {
#clock-cells = <0>;
reg = <30>;
atmel,clk-output-range = <0 83000000>;
};
spi0_clk: spi0_clk {
#clock-cells = <0>;
reg = <33>;
atmel,clk-output-range = <0 83000000>;
};
spi1_clk: spi1_clk {
#clock-cells = <0>;
reg = <34>;
atmel,clk-output-range = <0 83000000>;
};
tcb0_clk: tcb0_clk {
#clock-cells = <0>;
reg = <35>;
atmel,clk-output-range = <0 83000000>;
};
tcb1_clk: tcb1_clk {
#clock-cells = <0>;
reg = <36>;
atmel,clk-output-range = <0 83000000>;
};
pwm_clk: pwm_clk {
#clock-cells = <0>;
reg = <38>;
atmel,clk-output-range = <0 83000000>;
};
adc_clk: adc_clk {
#clock-cells = <0>;
reg = <40>;
atmel,clk-output-range = <0 83000000>;
};
uhphs_clk: uhphs_clk {
#clock-cells = <0>;
reg = <41>;
atmel,clk-output-range = <0 83000000>;
};
udphs_clk: udphs_clk {
#clock-cells = <0>;
reg = <42>;
atmel,clk-output-range = <0 83000000>;
};
ssc0_clk: ssc0_clk {
#clock-cells = <0>;
reg = <43>;
atmel,clk-output-range = <0 83000000>;
};
ssc1_clk: ssc1_clk {
#clock-cells = <0>;
reg = <44>;
atmel,clk-output-range = <0 83000000>;
};
trng_clk: trng_clk {
#clock-cells = <0>;
reg = <47>;
atmel,clk-output-range = <0 83000000>;
};
pdmic_clk: pdmic_clk {
#clock-cells = <0>;
reg = <48>;
atmel,clk-output-range = <0 83000000>;
};
securam_clk: securam_clk {
#clock-cells = <0>;
reg = <51>;
};
i2s0_clk: i2s0_clk {
#clock-cells = <0>;
reg = <54>;
atmel,clk-output-range = <0 83000000>;
};
i2s1_clk: i2s1_clk {
#clock-cells = <0>;
reg = <55>;
atmel,clk-output-range = <0 83000000>;
};
can0_clk: can0_clk {
#clock-cells = <0>;
reg = <56>;
atmel,clk-output-range = <0 83000000>;
};
can1_clk: can1_clk {
#clock-cells = <0>;
reg = <57>;
atmel,clk-output-range = <0 83000000>;
};
classd_clk: classd_clk {
#clock-cells = <0>;
reg = <59>;
atmel,clk-output-range = <0 83000000>;
};
};
periph64ck {
compatible = "atmel,at91sam9x5-clk-peripheral";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mck>;
dma0_clk: dma0_clk {
#clock-cells = <0>;
reg = <6>;
};
dma1_clk: dma1_clk {
#clock-cells = <0>;
reg = <7>;
};
aes_clk: aes_clk {
#clock-cells = <0>;
reg = <9>;
};
aesb_clk: aesb_clk {
#clock-cells = <0>;
reg = <10>;
};
sha_clk: sha_clk {
#clock-cells = <0>;
reg = <12>;
};
mpddr_clk: mpddr_clk {
#clock-cells = <0>;
reg = <13>;
};
matrix0_clk: matrix0_clk {
#clock-cells = <0>;
reg = <15>;
};
sdmmc0_hclk: sdmmc0_hclk {
#clock-cells = <0>;
reg = <31>;
};
sdmmc1_hclk: sdmmc1_hclk {
#clock-cells = <0>;
reg = <32>;
};
lcdc_clk: lcdc_clk {
#clock-cells = <0>;
reg = <45>;
};
isc_clk: isc_clk {
#clock-cells = <0>;
reg = <46>;
};
qspi0_clk: qspi0_clk {
#clock-cells = <0>;
reg = <52>;
};
qspi1_clk: qspi1_clk {
#clock-cells = <0>;
reg = <53>;
};
};
gck {
compatible = "atmel,sama5d2-clk-generated";
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&pmc>;
clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>;
sdmmc0_gclk: sdmmc0_gclk {
#clock-cells = <0>;
reg = <31>;
};
sdmmc1_gclk: sdmmc1_gclk {
#clock-cells = <0>;
reg = <32>;
};
tcb0_gclk: tcb0_gclk {
#clock-cells = <0>;
reg = <35>;
atmel,clk-output-range = <0 83000000>;
};
tcb1_gclk: tcb1_gclk {
#clock-cells = <0>;
reg = <36>;
atmel,clk-output-range = <0 83000000>;
};
pwm_gclk: pwm_gclk {
#clock-cells = <0>;
reg = <38>;
atmel,clk-output-range = <0 83000000>;
};
isc_gclk: isc_gclk {
#clock-cells = <0>;
reg = <46>;
};
pdmic_gclk: pdmic_gclk {
#clock-cells = <0>;
reg = <48>;
};
i2s0_gclk: i2s0_gclk {
#clock-cells = <0>;
reg = <54>;
};
i2s1_gclk: i2s1_gclk {
#clock-cells = <0>;
reg = <55>;
};
can0_gclk: can0_gclk {
#clock-cells = <0>;
reg = <56>;
atmel,clk-output-range = <0 80000000>;
};
can1_gclk: can1_gclk {
#clock-cells = <0>;
reg = <57>;
atmel,clk-output-range = <0 80000000>;
};
classd_gclk: classd_gclk {
#clock-cells = <0>;
reg = <59>;
atmel,clk-output-range = <0 100000000>;
};
};
i2s_clkmux {
compatible = "atmel,sama5d2-clk-i2s-mux";
#address-cells = <1>;
#size-cells = <0>;
i2s0muxck: i2s0_muxclk {
clocks = <&i2s0_clk>, <&i2s0_gclk>;
#clock-cells = <0>;
reg = <0>;
};
i2s1muxck: i2s1_muxclk {
clocks = <&i2s1_clk>, <&i2s1_gclk>;
#clock-cells = <0>;
reg = <1>;
};
};
#clock-cells = <2>;
clocks = <&clk32k>, <&main_xtal>;
clock-names = "slow_clk", "main_xtal";
};
qspi0: spi@f0020000 {
......@@ -985,7 +435,7 @@ qspi0: spi@f0020000 {
reg = <0xf0020000 0x100>, <0xd0000000 0x08000000>;
reg-names = "qspi_base", "qspi_mmap";
interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&qspi0_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
......@@ -996,7 +446,7 @@ qspi1: spi@f0024000 {
reg = <0xf0024000 0x100>, <0xd8000000 0x08000000>;
reg-names = "qspi_base", "qspi_mmap";
interrupts = <53 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&qspi1_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 53>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
......@@ -1010,7 +460,7 @@ sha@f0028000 {
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(30))>;
dma-names = "tx";
clocks = <&sha_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
clock-names = "sha_clk";
status = "okay";
};
......@@ -1026,7 +476,7 @@ AT91_XDMAC_DT_PERID(26))>,
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(27))>;
dma-names = "tx", "rx";
clocks = <&aes_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
clock-names = "aes_clk";
status = "okay";
};
......@@ -1042,7 +492,7 @@ AT91_XDMAC_DT_PERID(6))>,
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(7))>;
dma-names = "tx", "rx";
clocks = <&spi0_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
clock-names = "spi_clk";
atmel,fifo-size = <16>;
#address-cells = <1>;
......@@ -1061,7 +511,7 @@ AT91_XDMAC_DT_PERID(21))>,
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(22))>;
dma-names = "tx", "rx";
clocks = <&ssc0_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
clock-names = "pclk";
status = "disabled";
};
......@@ -1074,7 +524,7 @@ macb0: ethernet@f8008000 {
67 IRQ_TYPE_LEVEL_HIGH 3>; /* Queue 2 */
#address-cells = <1>;
#size-cells = <0>;
clocks = <&macb0_clk>, <&macb0_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>;
clock-names = "hclk", "pclk";
status = "disabled";
};
......@@ -1085,7 +535,7 @@ tcb0: timer@f800c000 {
#size-cells = <0>;
reg = <0xf800c000 0x100>;
interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&tcb0_clk>, <&clk32k>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
......@@ -1095,7 +545,7 @@ tcb1: timer@f8010000 {
#size-cells = <0>;
reg = <0xf8010000 0x100>;
interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&tcb1_clk>, <&clk32k>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
......@@ -1103,7 +553,7 @@ hsmc: hsmc@f8014000 {
compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
reg = <0xf8014000 0x1000>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
clocks = <&hsmc_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
......@@ -1123,7 +573,7 @@ pdmic: pdmic@f8018000 {
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(50))>;
dma-names = "rx";
clocks = <&pdmic_clk>, <&pdmic_gclk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 48>, <&pmc PMC_TYPE_GCK 48>;
clock-names = "pclk", "gclk";
status = "disabled";
};
......@@ -1139,7 +589,7 @@ AT91_XDMAC_DT_PERID(35))>,
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(36))>;
dma-names = "tx", "rx";
clocks = <&uart0_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
clock-names = "usart";
status = "disabled";
};
......@@ -1155,7 +605,7 @@ AT91_XDMAC_DT_PERID(37))>,
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(38))>;
dma-names = "tx", "rx";
clocks = <&uart1_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
clock-names = "usart";
status = "disabled";
};
......@@ -1171,7 +621,7 @@ AT91_XDMAC_DT_PERID(39))>,
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(40))>;
dma-names = "tx", "rx";
clocks = <&uart2_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
clock-names = "usart";
status = "disabled";
};
......@@ -1189,7 +639,7 @@ AT91_XDMAC_DT_PERID(0))>,
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&twi0_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
atmel,fifo-size = <16>;
status = "disabled";
};
......@@ -1199,7 +649,7 @@ pwm0: pwm@f802c000 {
reg = <0xf802c000 0x4000>;
interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>;
#pwm-cells = <3>;
clocks = <&pwm_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
};
sfr: sfr@f8030000 {
......@@ -1210,7 +660,7 @@ sfr: sfr@f8030000 {
flx0: flexcom@f8034000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xf8034000 0x200>;
clocks = <&flx0_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xf8034000 0x800>;
......@@ -1220,7 +670,7 @@ flx0: flexcom@f8034000 {
flx1: flexcom@f8038000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xf8038000 0x200>;
clocks = <&flx1_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xf8038000 0x800>;
......@@ -1230,7 +680,7 @@ flx1: flexcom@f8038000 {
securam: sram@f8044000 {
compatible = "atmel,sama5d2-securam", "mmio-sram";
reg = <0xf8044000 0x1420>;
clocks = <&securam_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 51>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xf8044000 0x1420>;
......@@ -1255,7 +705,7 @@ pit: timer@f8048030 {
compatible = "atmel,at91sam9260-pit";
reg = <0xf8048030 0x10>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
clocks = <&h32ck>;
clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
};
watchdog@f8048040 {
......@@ -1292,10 +742,10 @@ AT91_XDMAC_DT_PERID(31))>,
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(32))>;
dma-names = "tx", "rx";
clocks = <&i2s0_clk>, <&i2s0_gclk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 54>, <&pmc PMC_TYPE_GCK 54>;
clock-names = "pclk", "gclk";
assigned-clocks = <&i2s0muxck>;
assigned-clock-parents = <&i2s0_gclk>;
assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S0_MUX>;
assigned-clock-parents = <&pmc PMC_TYPE_GCK 54>;
status = "disabled";
};
......@@ -1306,10 +756,10 @@ can0: can@f8054000 {
interrupts = <56 IRQ_TYPE_LEVEL_HIGH 7>,
<64 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-names = "int0", "int1";
clocks = <&can0_clk>, <&can0_gclk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 56>, <&pmc PMC_TYPE_GCK 56>;
clock-names = "hclk", "cclk";
assigned-clocks = <&can0_gclk>;
assigned-clock-parents = <&utmi>;
assigned-clocks = <&pmc PMC_TYPE_GCK 56>;
assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
assigned-clock-rates = <40000000>;
bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
status = "disabled";
......@@ -1326,7 +776,7 @@ AT91_XDMAC_DT_PERID(8))>,
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(9))>;
dma-names = "tx", "rx";
clocks = <&spi1_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
clock-names = "spi_clk";
atmel,fifo-size = <16>;
#address-cells = <1>;
......@@ -1345,7 +795,7 @@ AT91_XDMAC_DT_PERID(41))>,
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(42))>;
dma-names = "tx", "rx";
clocks = <&uart3_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
clock-names = "usart";
status = "disabled";
};
......@@ -1361,7 +811,7 @@ AT91_XDMAC_DT_PERID(43))>,
AT91_XDMAC_DT_PERID(44))>;
dma-names = "tx", "rx";
interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&uart4_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
clock-names = "usart";
status = "disabled";
};
......@@ -1369,7 +819,7 @@ AT91_XDMAC_DT_PERID(43))>,
flx2: flexcom@fc010000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xfc010000 0x200>;
clocks = <&flx2_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xfc010000 0x800>;
......@@ -1379,7 +829,7 @@ flx2: flexcom@fc010000 {
flx3: flexcom@fc014000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xfc014000 0x200>;
clocks = <&flx3_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xfc014000 0x800>;
......@@ -1389,7 +839,7 @@ flx3: flexcom@fc014000 {
flx4: flexcom@fc018000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xfc018000 0x200>;
clocks = <&flx4_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xfc018000 0x800>;
......@@ -1400,7 +850,7 @@ trng@fc01c000 {
compatible = "atmel,at91sam9g45-trng";
reg = <0xfc01c000 0x100>;
interrupts = <47 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&trng_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
};
aic: interrupt-controller@fc020000 {
......@@ -1424,7 +874,7 @@ AT91_XDMAC_DT_PERID(2))>,
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&twi1_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
atmel,fifo-size = <16>;
status = "disabled";
};
......@@ -1433,7 +883,7 @@ adc: adc@fc030000 {
compatible = "atmel,sama5d2-adc";
reg = <0xfc030000 0x100>;
interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&adc_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
clock-names = "adc_clk";
dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
dma-names = "rx";
......@@ -1466,7 +916,7 @@ pioA: pinctrl@fc038000 {
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&pioA_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
};
secumod@fc040000 {
......@@ -1485,7 +935,7 @@ AT91_XDMAC_DT_PERID(28))>,
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(29))>;
dma-names = "tx", "rx";
clocks = <&tdes_clk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
clock-names = "tdes_clk";
status = "okay";
};
......@@ -1498,7 +948,7 @@ classd: classd@fc048000 {
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(47))>;
dma-names = "tx";
clocks = <&classd_clk>, <&classd_gclk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 59>, <&pmc PMC_TYPE_GCK 59>;
clock-names = "pclk", "gclk";
status = "disabled";
};
......@@ -1514,10 +964,10 @@ AT91_XDMAC_DT_PERID(33))>,
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(34))>;
dma-names = "tx", "rx";
clocks = <&i2s1_clk>, <&i2s1_gclk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_GCK 55>;
clock-names = "pclk", "gclk";
assigned-clocks = <&i2s1muxck>;
assigned-parrents = <&i2s1_gclk>;
assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S1_MUX>;
assigned-parrents = <&pmc PMC_TYPE_GCK 55>;
status = "disabled";
};
......@@ -1528,10 +978,10 @@ can1: can@fc050000 {
interrupts = <57 IRQ_TYPE_LEVEL_HIGH 7>,
<65 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-names = "int0", "int1";
clocks = <&can1_clk>, <&can1_gclk>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
clock-names = "hclk", "cclk";
assigned-clocks = <&can1_gclk>;
assigned-clock-parents = <&utmi>;
assigned-clocks = <&pmc PMC_TYPE_GCK 57>;
assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
assigned-clock-rates = <40000000>;
bosch,mram-cfg = <0x1100 0 0 64 0 0 32 32>;
status = "disabled";
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7