Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (22 commits)
  pcmcia: synclink_cs: fix information leak to userland
  pcmcia: don't call flush_scheduled_work() spuriously
  serial_cs: drop spurious flush_scheduled_work() call
  pcmcia/yenta: guide users in case of problems with O2-bridges
  pcmcia: fix unused function compile warning
  pcmcia: vrc4173_cardu: Fix error path for pci_release_regions and pci_disable_device
  pcmcia: add a few debug statements
  pcmcia: remove obsolete and wrong comments
  pcmcia: avoid messages on module (un)loading
  pcmcia: move driver name to struct pcmcia_driver
  pcmcia: remove the "Finally, report what we've done" message
  pcmcia: use autoconfiguration feature for ioports and iomem
  pcmcia: introduce autoconfiguration feature
  pcmcia: Documentation update
  pcmcia: convert pcmcia_request_configuration to pcmcia_enable_device
  pcmcia: move config_{base,index,regs} to struct pcmcia_device
  pcmcia: simplify IntType
  pcmcia: simplify Status, ExtStatus register access
  pcmcia: remove Pin, Copy configuration register access
  pcmcia: move Vpp setup to struct pcmcia_device
  ...

Documentation/pcmcia/driver-changes.txt

 This file details changes in 2.6 which affect PCMCIA card driver authors:
+* pcmcia_loop_config() and autoconfiguration (as of 2.6.36)
+   If struct pcmcia_device *p_dev->config_flags is set accordingly,
+   pcmcia_loop_config() now sets up certain configuration values
+   automatically, though the driver may still override the settings
+   in the callback function. The following autoconfiguration options
+   are provided at the moment:
+	CONF_AUTO_CHECK_VCC : check for matching Vcc
+	CONF_AUTO_SET_VPP   : set Vpp
+	CONF_AUTO_AUDIO     : auto-enable audio line, if required
+	CONF_AUTO_SET_IO    : set ioport resources (->resource[0,1])
+	CONF_AUTO_SET_IOMEM : set first iomem resource (->resource[2])
+
+* pcmcia_request_configuration -> pcmcia_enable_device (as of 2.6.36)
+   pcmcia_request_configuration() got renamed to pcmcia_enable_device(),
+   as it mirrors pcmcia_disable_device(). Configuration settings are now
+   stored in struct pcmcia_device, e.g. in the fields config_flags,
+   config_index, config_base, vpp.
+
+* pcmcia_request_window changes (as of 2.6.36)
+   Instead of win_req_t, drivers are now requested to fill out
+   struct pcmcia_device *p_dev->resource[2,3,4,5] for up to four ioport
+   ranges. After a call to pcmcia_request_window(), the regions found there
+   are reserved and may be used immediately -- until pcmcia_release_window()
+   is called.
+
 * pcmcia_request_io changes (as of 2.6.36)
    Instead of io_req_t, drivers are now requested to fill out
    struct pcmcia_device *p_dev->resource[0,1] for up to two ioport

drivers/ata/pata_pcmcia.c

@@ -34,7 +34,6 @@
 #include <linux/ata.h>
 #include <linux/libata.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 #include <pcmcia/cisreg.h>
@@ -168,63 +167,26 @@ static struct ata_port_operations pcmcia_8bit_port_ops = {
 };
 
 
-struct pcmcia_config_check {
-	unsigned long ctl_base;
-	int skip_vcc;
-	int is_kme;
-};
-
-static int pcmcia_check_one_config(struct pcmcia_device *pdev,
-				   cistpl_cftable_entry_t *cfg,
-				   cistpl_cftable_entry_t *dflt,
-				   unsigned int vcc,
-				   void *priv_data)
+static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data)
 {
-	struct pcmcia_config_check *stk = priv_data;
-
-	/* Check for matching Vcc, unless we're desperate */
-	if (!stk->skip_vcc) {
-		if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
-				return -ENODEV;
-		} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000)
-				return -ENODEV;
-		}
+	int *is_kme = priv_data;
+
+	if (!(pdev->resource[0]->flags & IO_DATA_PATH_WIDTH_8)) {
+		pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+		pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 	}
+	pdev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+	pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
 
-	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-		pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
-		pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
-	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		pdev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
-		pdev->resource[0]->start = io->win[0].base;
-		if (!(io->flags & CISTPL_IO_16BIT)) {
-			pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
-			pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
-		}
-		if (io->nwin == 2) {
-			pdev->resource[0]->end = 8;
-			pdev->resource[1]->start = io->win[1].base;
-			pdev->resource[1]->end = (stk->is_kme) ? 2 : 1;
-			if (pcmcia_request_io(pdev) != 0)
-				return -ENODEV;
-			stk->ctl_base = pdev->resource[1]->start;
-		} else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
-			pdev->resource[0]->end = io->win[0].len;
-			pdev->resource[1]->end = 0;
-			if (pcmcia_request_io(pdev) != 0)
-				return -ENODEV;
-			stk->ctl_base = pdev->resource[0]->start + 0x0e;
-		} else
+	if (pdev->resource[1]->end) {
+		pdev->resource[0]->end = 8;
+		pdev->resource[1]->end = (*is_kme) ? 2 : 1;
+	} else {
+		if (pdev->resource[0]->end < 16)
 			return -ENODEV;
-		/* If we've got this far, we're done */
-		return 0;
 	}
-	return -ENODEV;
+
+	return pcmcia_request_io(pdev);
 }
 
 /**
@@ -239,7 +201,6 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 {
 	struct ata_host *host;
 	struct ata_port *ap;
-	struct pcmcia_config_check *stk = NULL;
 	int is_kme = 0, ret = -ENOMEM, p;
 	unsigned long io_base, ctl_base;
 	void __iomem *io_addr, *ctl_addr;
@@ -247,10 +208,8 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 	struct ata_port_operations *ops = &pcmcia_port_ops;
 
 	/* Set up attributes in order to probe card and get resources */
-	pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
-	pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
-	pdev->conf.Attributes = CONF_ENABLE_IRQ;
-	pdev->conf.IntType = INT_MEMORY_AND_IO;
+	pdev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO |
+		CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC;
 
 	/* See if we have a manufacturer identifier. Use it to set is_kme for
 	   vendor quirks */
@@ -258,25 +217,21 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 		  ((pdev->card_id == PRODID_KME_KXLC005_A) ||
 		   (pdev->card_id == PRODID_KME_KXLC005_B)));
 
-	/* Allocate resoure probing structures */
-
-	stk = kzalloc(sizeof(*stk), GFP_KERNEL);
-	if (!stk)
-		goto out1;
-	stk->is_kme = is_kme;
-	stk->skip_vcc = io_base = ctl_base = 0;
-
-	if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) {
-		stk->skip_vcc = 1;
-		if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk))
+	if (pcmcia_loop_config(pdev, pcmcia_check_one_config, &is_kme)) {
+		pdev->config_flags &= ~CONF_AUTO_CHECK_VCC;
+		if (pcmcia_loop_config(pdev, pcmcia_check_one_config, &is_kme))
 			goto failed; /* No suitable config found */
 	}
 	io_base = pdev->resource[0]->start;
-	ctl_base = stk->ctl_base;
+	if (pdev->resource[1]->end)
+		ctl_base = pdev->resource[1]->start;
+	else
+		ctl_base = pdev->resource[0]->start + 0x0e;
+
 	if (!pdev->irq)
 		goto failed;
 
-	ret = pcmcia_request_configuration(pdev, &pdev->conf);
+	ret = pcmcia_enable_device(pdev);
 	if (ret)
 		goto failed;
 
@@ -329,13 +284,10 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 		goto failed;
 
 	pdev->priv = host;
-	kfree(stk);
 	return 0;
 
 failed:
-	kfree(stk);
 	pcmcia_disable_device(pdev);
-out1:
 	return ret;
 }
 
@@ -430,9 +382,7 @@ MODULE_DEVICE_TABLE(pcmcia, pcmcia_devices);
 
 static struct pcmcia_driver pcmcia_driver = {
 	.owner		= THIS_MODULE,
-	.drv = {
-		.name		= DRV_NAME,
-	},
+	.name		= DRV_NAME,
 	.id_table	= pcmcia_devices,
 	.probe		= pcmcia_init_one,
 	.remove		= pcmcia_remove_one,

drivers/bluetooth/bluecard_cs.c

@@ -39,7 +39,6 @@
 #include <linux/skbuff.h>
 #include <linux/io.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
 #include <pcmcia/ds.h>
@@ -865,8 +864,7 @@ static int bluecard_probe(struct pcmcia_device *link)
 	info->p_dev = link;
 	link->priv = info;
 
-	link->conf.Attributes = CONF_ENABLE_IRQ;
-	link->conf.IntType = INT_MEMORY_AND_IO;
+	link->config_flags |= CONF_ENABLE_IRQ;
 
 	return bluecard_config(link);
 }
@@ -886,7 +884,7 @@ static int bluecard_config(struct pcmcia_device *link)
 	bluecard_info_t *info = link->priv;
 	int i, n;
 
-	link->conf.ConfigIndex = 0x20;
+	link->config_index = 0x20;
 
 	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 	link->resource[0]->end = 64;
@@ -906,7 +904,7 @@ static int bluecard_config(struct pcmcia_device *link)
 	if (i != 0)
 		goto failed;
 
-	i = pcmcia_request_configuration(link, &link->conf);
+	i = pcmcia_enable_device(link);
 	if (i != 0)
 		goto failed;
 
@@ -942,9 +940,7 @@ MODULE_DEVICE_TABLE(pcmcia, bluecard_ids);
 
 static struct pcmcia_driver bluecard_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "bluecard_cs",
-	},
+	.name		= "bluecard_cs",
 	.probe		= bluecard_probe,
 	.remove		= bluecard_detach,
 	.id_table	= bluecard_ids,

drivers/bluetooth/bt3c_cs.c

@@ -45,7 +45,6 @@
 #include <linux/device.h>
 #include <linux/firmware.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
 #include <pcmcia/ds.h>
@@ -657,11 +656,8 @@ static int bt3c_probe(struct pcmcia_device *link)
 	info->p_dev = link;
 	link->priv = info;
 
-	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
-	link->resource[0]->end = 8;
-
-	link->conf.Attributes = CONF_ENABLE_IRQ;
-	link->conf.IntType = INT_MEMORY_AND_IO;
+	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
+		CONF_AUTO_SET_IO;
 
 	return bt3c_config(link);
 }
@@ -675,43 +671,41 @@ static void bt3c_detach(struct pcmcia_device *link)
 	kfree(info);
 }
 
-static int bt3c_check_config(struct pcmcia_device *p_dev,
-			     cistpl_cftable_entry_t *cf,
-			     cistpl_cftable_entry_t *dflt,
-			     unsigned int vcc,
-			     void *priv_data)
+static int bt3c_check_config(struct pcmcia_device *p_dev, void *priv_data)
 {
-	unsigned long try = (unsigned long) priv_data;
+	int *try = priv_data;
 
-	p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
+	if (try == 0)
+		p_dev->io_lines = 16;
 
-	if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-	if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) &&
-	    (cf->io.win[0].base != 0)) {
-		p_dev->resource[0]->start = cf->io.win[0].base;
-		if (!pcmcia_request_io(p_dev))
-			return 0;
-	}
-	return -ENODEV;
+	if ((p_dev->resource[0]->end != 8) || (p_dev->resource[0]->start == 0))
+		return -EINVAL;
+
+	p_dev->resource[0]->end = 8;
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+
+	return pcmcia_request_io(p_dev);
 }
 
 static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev,
-				      cistpl_cftable_entry_t *cf,
-				      cistpl_cftable_entry_t *dflt,
-				      unsigned int vcc,
 				      void *priv_data)
 {
 	static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
 	int j;
 
-	if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
-		for (j = 0; j < 5; j++) {
-			p_dev->resource[0]->start = base[j];
-			p_dev->io_lines = base[j] ? 16 : 3;
-			if (!pcmcia_request_io(p_dev))
-				return 0;
-		}
+	if (p_dev->io_lines > 3)
+		return -ENODEV;
+
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+	p_dev->resource[0]->end = 8;
+
+	for (j = 0; j < 5; j++) {
+		p_dev->resource[0]->start = base[j];
+		p_dev->io_lines = base[j] ? 16 : 3;
+		if (!pcmcia_request_io(p_dev))
+			return 0;
 	}
 	return -ENODEV;
 }
@@ -742,7 +736,7 @@ static int bt3c_config(struct pcmcia_device *link)
 	if (i != 0)
 		goto failed;
 
-	i = pcmcia_request_configuration(link, &link->conf);
+	i = pcmcia_enable_device(link);
 	if (i != 0)
 		goto failed;
 
@@ -775,9 +769,7 @@ MODULE_DEVICE_TABLE(pcmcia, bt3c_ids);
 
 static struct pcmcia_driver bt3c_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "bt3c_cs",
-	},
+	.name		= "bt3c_cs",
 	.probe		= bt3c_probe,
 	.remove		= bt3c_detach,
 	.id_table	= bt3c_ids,

drivers/bluetooth/btuart_cs.c

@@ -41,7 +41,6 @@
 #include <asm/system.h>
 #include <asm/io.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
 #include <pcmcia/ds.h>
@@ -586,11 +585,8 @@ static int btuart_probe(struct pcmcia_device *link)
 	info->p_dev = link;
 	link->priv = info;
 
-	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
-	link->resource[0]->end = 8;
-
-	link->conf.Attributes = CONF_ENABLE_IRQ;
-	link->conf.IntType = INT_MEMORY_AND_IO;
+	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
+		CONF_AUTO_SET_IO;
 
 	return btuart_config(link);
 }
@@ -604,43 +600,41 @@ static void btuart_detach(struct pcmcia_device *link)
 	kfree(info);
 }
 
-static int btuart_check_config(struct pcmcia_device *p_dev,
-			       cistpl_cftable_entry_t *cf,
-			       cistpl_cftable_entry_t *dflt,
-			       unsigned int vcc,
-			       void *priv_data)
+static int btuart_check_config(struct pcmcia_device *p_dev, void *priv_data)
 {
 	int *try = priv_data;
 
-	p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
+	if (try == 0)
+		p_dev->io_lines = 16;
 
-	if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-	if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) &&
-	    (cf->io.win[0].base != 0)) {
-		p_dev->resource[0]->start = cf->io.win[0].base;
-		if (!pcmcia_request_io(p_dev))
-			return 0;
-	}
-	return -ENODEV;
+	if ((p_dev->resource[0]->end != 8) || (p_dev->resource[0]->start == 0))
+		return -EINVAL;
+
+	p_dev->resource[0]->end = 8;
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+
+	return pcmcia_request_io(p_dev);
 }
 
 static int btuart_check_config_notpicky(struct pcmcia_device *p_dev,
-					cistpl_cftable_entry_t *cf,
-					cistpl_cftable_entry_t *dflt,
-					unsigned int vcc,
 					void *priv_data)
 {
 	static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
 	int j;
 
-	if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
-		for (j = 0; j < 5; j++) {
-			p_dev->resource[0]->start = base[j];
-			p_dev->io_lines = base[j] ? 16 : 3;
-			if (!pcmcia_request_io(p_dev))
-				return 0;
-		}
+	if (p_dev->io_lines > 3)
+		return -ENODEV;
+
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+	p_dev->resource[0]->end = 8;
+
+	for (j = 0; j < 5; j++) {
+		p_dev->resource[0]->start = base[j];
+		p_dev->io_lines = base[j] ? 16 : 3;
+		if (!pcmcia_request_io(p_dev))
+			return 0;
 	}
 	return -ENODEV;
 }
@@ -671,7 +665,7 @@ static int btuart_config(struct pcmcia_device *link)
 	if (i != 0)
 		goto failed;
 
-	i = pcmcia_request_configuration(link, &link->conf);
+	i = pcmcia_enable_device(link);
 	if (i != 0)
 		goto failed;
 
@@ -703,9 +697,7 @@ MODULE_DEVICE_TABLE(pcmcia, btuart_ids);
 
 static struct pcmcia_driver btuart_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "btuart_cs",
-	},
+	.name		= "btuart_cs",
 	.probe		= btuart_probe,
 	.remove		= btuart_detach,
 	.id_table	= btuart_ids,

drivers/bluetooth/dtl1_cs.c

@@ -41,7 +41,6 @@
 #include <asm/system.h>
 #include <asm/io.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
 #include <pcmcia/ds.h>
@@ -572,11 +571,7 @@ static int dtl1_probe(struct pcmcia_device *link)
 	info->p_dev = link;
 	link->priv = info;
 
-	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
-	link->resource[0]->end = 8;
-
-	link->conf.Attributes = CONF_ENABLE_IRQ;
-	link->conf.IntType = INT_MEMORY_AND_IO;
+	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
 
 	return dtl1_config(link);
 }
@@ -591,18 +586,14 @@ static void dtl1_detach(struct pcmcia_device *link)
 	kfree(info);
 }
 
-static int dtl1_confcheck(struct pcmcia_device *p_dev,
-			  cistpl_cftable_entry_t *cf,
-			  cistpl_cftable_entry_t *dflt,
-			  unsigned int vcc,
-			  void *priv_data)
+static int dtl1_confcheck(struct pcmcia_device *p_dev, void *priv_data)
 {
-	if ((cf->io.nwin != 1) || (cf->io.win[0].len <= 8))
+	if ((p_dev->resource[1]->end) || (p_dev->resource[1]->end < 8))
 		return -ENODEV;
 
-	p_dev->resource[0]->start = cf->io.win[0].base;
-	p_dev->resource[0]->end = cf->io.win[0].len;	/*yo */
-	p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+
 	return pcmcia_request_io(p_dev);
 }
 
@@ -620,7 +611,7 @@ static int dtl1_config(struct pcmcia_device *link)
 	if (i != 0)
 		goto failed;
 
-	i = pcmcia_request_configuration(link, &link->conf);
+	i = pcmcia_enable_device(link);
 	if (i != 0)
 		goto failed;
 
@@ -656,9 +647,7 @@ MODULE_DEVICE_TABLE(pcmcia, dtl1_ids);
 
 static struct pcmcia_driver dtl1_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "dtl1_cs",
-	},
+	.name		= "dtl1_cs",
 	.probe		= dtl1_probe,
 	.remove		= dtl1_detach,
 	.id_table	= dtl1_ids,

drivers/char/pcmcia/cm4000_cs.c

@@ -34,7 +34,6 @@
 #include <linux/uaccess.h>
 #include <linux/io.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ciscode.h>
@@ -55,8 +54,6 @@
 			   __func__ , ## args);		\
 	} while (0)
 
-static char *version = "cm4000_cs.c v2.4.0gm6 - All bugs added by Harald Welte";
-
 #define	T_1SEC		(HZ)
 #define	T_10MSEC	msecs_to_jiffies(10)
 #define	T_20MSEC	msecs_to_jiffies(20)
@@ -1742,20 +1739,8 @@ static void cmm_cm4000_release(struct pcmcia_device * link)
 
 /*==== Interface to PCMCIA Layer =======================================*/
 
-static int cm4000_config_check(struct pcmcia_device *p_dev,
-			       cistpl_cftable_entry_t *cfg,
-			       cistpl_cftable_entry_t *dflt,
-			       unsigned int vcc,
-			       void *priv_data)
+static int cm4000_config_check(struct pcmcia_device *p_dev, void *priv_data)
 {
-	if (!cfg->io.nwin)
-		return -ENODEV;
-
-	p_dev->resource[0]->start = cfg->io.win[0].base;
-	p_dev->resource[0]->end = cfg->io.win[0].len;
-	p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags);
-	p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK;
-
 	return pcmcia_request_io(p_dev);
 }
 
@@ -1763,13 +1748,13 @@ static int cm4000_config(struct pcmcia_device * link, int devno)
 {
 	struct cm4000_dev *dev;
 
+	link->config_flags |= CONF_AUTO_SET_IO;
+
 	/* read the config-tuples */
 	if (pcmcia_loop_config(link, cm4000_config_check, NULL))
 		goto cs_release;
 
-	link->conf.IntType = 00000002;
-
-	if (pcmcia_request_configuration(link, &link->conf))
+	if (pcmcia_enable_device(link))
 		goto cs_release;
 
 	dev = link->priv;
@@ -1829,7 +1814,6 @@ static int cm4000_probe(struct pcmcia_device *link)
 
 	dev->p_dev = link;
 	link->priv = dev;
-	link->conf.IntType = INT_MEMORY_AND_IO;
 	dev_table[i] = link;
 
 	init_waitqueue_head(&dev->devq);
@@ -1891,9 +1875,7 @@ MODULE_DEVICE_TABLE(pcmcia, cm4000_ids);
 
 static struct pcmcia_driver cm4000_driver = {
 	.owner	  = THIS_MODULE,
-	.drv	  = {
-		.name = "cm4000_cs",
-		},
+	.name	  = "cm4000_cs",
 	.probe    = cm4000_probe,
 	.remove   = cm4000_detach,
 	.suspend  = cm4000_suspend,
@@ -1905,8 +1887,6 @@ static int __init cmm_init(void)
 {
 	int rc;
 
-	printk(KERN_INFO "%s\n", version);
-
 	cmm_class = class_create(THIS_MODULE, "cardman_4000");
 	if (IS_ERR(cmm_class))
 		return PTR_ERR(cmm_class);
@@ -1931,7 +1911,6 @@ static int __init cmm_init(void)
 
 static void __exit cmm_exit(void)
 {
-	printk(KERN_INFO MODULE_NAME ": unloading\n");
 	pcmcia_unregister_driver(&cm4000_driver);
 	unregister_chrdev(major, DEVICE_NAME);
 	class_destroy(cmm_class);

drivers/char/pcmcia/cm4040_cs.c

@@ -29,7 +29,6 @@
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ciscode.h>
@@ -49,9 +48,6 @@
 			   __func__ , ## args);		\
 	} while (0)
 
-static char *version =
-"OMNIKEY CardMan 4040 v1.1.0gm5 - All bugs added by Harald Welte";
-
 #define	CCID_DRIVER_BULK_DEFAULT_TIMEOUT  	(150*HZ)
 #define	CCID_DRIVER_ASYNC_POWERUP_TIMEOUT 	(35*HZ)
 #define	CCID_DRIVER_MINIMUM_TIMEOUT 		(3*HZ)
@@ -516,26 +512,9 @@ static void cm4040_reader_release(struct pcmcia_device *link)
 	return;
 }
 
-static int cm4040_config_check(struct pcmcia_device *p_dev,
-			       cistpl_cftable_entry_t *cfg,
-			       cistpl_cftable_entry_t *dflt,
-			       unsigned int vcc,
-			       void *priv_data)
+static int cm4040_config_check(struct pcmcia_device *p_dev, void *priv_data)
 {
-	int rc;
-	if (!cfg->io.nwin)
-		return -ENODEV;
-
-	/* Get the IOaddr */
-	p_dev->resource[0]->start = cfg->io.win[0].base;
-	p_dev->resource[0]->end = cfg->io.win[0].len;
-	p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags);
-	p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK;
-	rc = pcmcia_request_io(p_dev);
-
-	dev_printk(KERN_INFO, &p_dev->dev,
-		   "pcmcia_request_io returned 0x%x\n", rc);
-	return rc;
+	return pcmcia_request_io(p_dev);
 }
 
 
@@ -544,15 +523,15 @@ static int reader_config(struct pcmcia_device *link, int devno)
 	struct reader_dev *dev;
 	int fail_rc;
 
+	link->config_flags |= CONF_AUTO_SET_IO;
+
 	if (pcmcia_loop_config(link, cm4040_config_check, NULL))
 		goto cs_release;
 
-	link->conf.IntType = 00000002;
-
-	fail_rc = pcmcia_request_configuration(link, &link->conf);
+	fail_rc = pcmcia_enable_device(link);
 	if (fail_rc != 0) {
 		dev_printk(KERN_INFO, &link->dev,
-			   "pcmcia_request_configuration failed 0x%x\n",
+			   "pcmcia_enable_device failed 0x%x\n",
 			   fail_rc);
 		goto cs_release;
 	}
@@ -599,7 +578,6 @@ static int reader_probe(struct pcmcia_device *link)
 	link->priv = dev;
 	dev->p_dev = link;
 
-	link->conf.IntType = INT_MEMORY_AND_IO;
 	dev_table[i] = link;
 
 	init_waitqueue_head(&dev->devq);
@@ -662,9 +640,7 @@ MODULE_DEVICE_TABLE(pcmcia, cm4040_ids);
 
 static struct pcmcia_driver reader_driver = {
   	.owner		= THIS_MODULE,
-  	.drv		= {
-		.name	= "cm4040_cs",
-	},
+	.name		= "cm4040_cs",
 	.probe		= reader_probe,
 	.remove		= reader_detach,
 	.id_table	= cm4040_ids,
@@ -674,7 +650,6 @@ static int __init cm4040_init(void)
 {
 	int rc;
 
-	printk(KERN_INFO "%s\n", version);
 	cmx_class = class_create(THIS_MODULE, "cardman_4040");
 	if (IS_ERR(cmx_class))
 		return PTR_ERR(cmx_class);
@@ -699,7 +674,6 @@ static int __init cm4040_init(void)
 
 static void __exit cm4040_exit(void)
 {
-	printk(KERN_INFO MODULE_NAME ": unloading\n");
 	pcmcia_unregister_driver(&reader_driver);
 	unregister_chrdev(major, DEVICE_NAME);
 	class_destroy(cmx_class);

drivers/char/pcmcia/ipwireless/main.c

@@ -32,7 +32,6 @@
 #include <pcmcia/device_id.h>
 #include <pcmcia/ss.h>
 #include <pcmcia/ds.h>
-#include <pcmcia/cs.h>
 
 static struct pcmcia_device_id ipw_ids[] = {
 	PCMCIA_DEVICE_MANF_CARD(0x02f2, 0x0100),
@@ -76,23 +75,18 @@ static void signalled_reboot_callback(void *callback_data)
 	schedule_work(&ipw->work_reboot);
 }
 
-static int ipwireless_probe(struct pcmcia_device *p_dev,
-			    cistpl_cftable_entry_t *cfg,
-			    cistpl_cftable_entry_t *dflt,
-			    unsigned int vcc,
-			    void *priv_data)
+static int ipwireless_probe(struct pcmcia_device *p_dev, void *priv_data)
 {
 	struct ipw_dev *ipw = priv_data;
 	struct resource *io_resource;
 	int ret;
 
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
 	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
-	p_dev->resource[0]->start = cfg->io.win[0].base;
-	p_dev->resource[0]->end = cfg->io.win[0].len;
 
 	/* 0x40 causes it to generate level mode interrupts. */
 	/* 0x04 enables IREQ pin. */
-	p_dev->conf.ConfigIndex = cfg->index | 0x44;
+	p_dev->config_index |= 0x44;
 	p_dev->io_lines = 16;
 	ret = pcmcia_request_io(p_dev);
 	if (ret)
@@ -102,65 +96,49 @@ static int ipwireless_probe(struct pcmcia_device *p_dev,
 				resource_size(p_dev->resource[0]),
 				IPWIRELESS_PCCARD_NAME);
 
-	if (cfg->mem.nwin == 0)
-		return 0;
-
-	ipw->request_common_memory.Attributes =
+	p_dev->resource[2]->flags |=
 		WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM | WIN_ENABLE;
-	ipw->request_common_memory.Base = cfg->mem.win[0].host_addr;
-	ipw->request_common_memory.Size = cfg->mem.win[0].len;
-	if (ipw->request_common_memory.Size < 0x1000)
-		ipw->request_common_memory.Size = 0x1000;
-	ipw->request_common_memory.AccessSpeed = 0;
-
-	ret = pcmcia_request_window(p_dev, &ipw->request_common_memory,
-				&ipw->handle_common_memory);
 
+	ret = pcmcia_request_window(p_dev, p_dev->resource[2], 0);
 	if (ret != 0)
 		goto exit1;
 
-	ret = pcmcia_map_mem_page(p_dev, ipw->handle_common_memory,
-				cfg->mem.win[0].card_addr);
-
+	ret = pcmcia_map_mem_page(p_dev, p_dev->resource[2], p_dev->card_addr);
 	if (ret != 0)
 		goto exit2;
 
-	ipw->is_v2_card = cfg->mem.win[0].len == 0x100;
+	ipw->is_v2_card = resource_size(p_dev->resource[2]) == 0x100;
 
-	ipw->common_memory = ioremap(ipw->request_common_memory.Base,
-				ipw->request_common_memory.Size);
-	request_mem_region(ipw->request_common_memory.Base,
-			ipw->request_common_memory.Size,
+	ipw->attr_memory = ioremap(p_dev->resource[2]->start,
+				resource_size(p_dev->resource[2]));
+	request_mem_region(p_dev->resource[2]->start,
+			resource_size(p_dev->resource[2]),
 			IPWIRELESS_PCCARD_NAME);
 
-	ipw->request_attr_memory.Attributes =
-		WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_AM | WIN_ENABLE;
-	ipw->request_attr_memory.Base = 0;
-	ipw->request_attr_memory.Size = 0;	/* this used to be 0x1000 */
-	ipw->request_attr_memory.AccessSpeed = 0;
-
-	ret = pcmcia_request_window(p_dev, &ipw->request_attr_memory,
-				&ipw->handle_attr_memory);
-
+	p_dev->resource[3]->flags |= WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_AM |
+					WIN_ENABLE;
+	p_dev->resource[3]->end = 0; /* this used to be 0x1000 */
+	ret = pcmcia_request_window(p_dev, p_dev->resource[3], 0);
 	if (ret != 0)
 		goto exit2;
 
-	ret = pcmcia_map_mem_page(p_dev, ipw->handle_attr_memory, 0);
+	ret = pcmcia_map_mem_page(p_dev, p_dev->resource[3], 0);
 	if (ret != 0)
 		goto exit3;
 
-	ipw->attr_memory = ioremap(ipw->request_attr_memory.Base,
-				ipw->request_attr_memory.Size);
-	request_mem_region(ipw->request_attr_memory.Base,
-			ipw->request_attr_memory.Size, IPWIRELESS_PCCARD_NAME);
+	ipw->attr_memory = ioremap(p_dev->resource[3]->start,
+				resource_size(p_dev->resource[3]));
+	request_mem_region(p_dev->resource[3]->start,
+			resource_size(p_dev->resource[3]),
+			IPWIRELESS_PCCARD_NAME);
 
 	return 0;
 
 exit3:
 exit2:
 	if (ipw->common_memory) {
-		release_mem_region(ipw->request_common_memory.Base,
-				ipw->request_common_memory.Size);
+		release_mem_region(p_dev->resource[2]->start,
+				resource_size(p_dev->resource[2]));
 		iounmap(ipw->common_memory);
 	}
 exit1:
@@ -175,14 +153,13 @@ static int config_ipwireless(struct ipw_dev *ipw)
 	int ret = 0;
 
 	ipw->is_v2_card = 0;
+	link->config_flags |= CONF_AUTO_SET_IO | CONF_AUTO_SET_IOMEM |
+		CONF_ENABLE_IRQ;
 
 	ret = pcmcia_loop_config(link, ipwireless_probe, ipw);
 	if (ret != 0)
 		return ret;
 
-	link->conf.Attributes = CONF_ENABLE_IRQ;
-	link->conf.IntType = INT_MEMORY_AND_IO;
-
 	INIT_WORK(&ipw->work_reboot, signalled_reboot_work);
 
 	ipwireless_init_hardware_v1(ipw->hardware, link->resource[0]->start,
@@ -201,13 +178,9 @@ static int config_ipwireless(struct ipw_dev *ipw)
 			(unsigned int) link->irq);
 	if (ipw->attr_memory && ipw->common_memory)
 		printk(KERN_INFO IPWIRELESS_PCCARD_NAME
-			": attr memory 0x%08lx-0x%08lx, common memory 0x%08lx-0x%08lx\n",
-			ipw->request_attr_memory.Base,
-			ipw->request_attr_memory.Base
-			+ ipw->request_attr_memory.Size - 1,
-			ipw->request_common_memory.Base,
-			ipw->request_common_memory.Base
-			+ ipw->request_common_memory.Size - 1);
+			": attr memory %pR, common memory %pR\n",
+			link->resource[3],
+			link->resource[2]);
 
 	ipw->network = ipwireless_network_create(ipw->hardware);
 	if (!ipw->network)
@@ -223,25 +196,23 @@ static int config_ipwireless(struct ipw_dev *ipw)
 	 * Do the RequestConfiguration last, because it enables interrupts.
 	 * Then we don't get any interrupts before we're ready for them.
 	 */
-	ret = pcmcia_request_configuration(link, &link->conf);
-
+	ret = pcmcia_enable_device(link);
 	if (ret != 0)
 		goto exit;
 
 	return 0;
 
 exit:
-	if (ipw->attr_memory) {
-		release_mem_region(ipw->request_attr_memory.Base,
-				ipw->request_attr_memory.Size);
-		iounmap(ipw->attr_memory);
-
-	}
 	if (ipw->common_memory) {
-		release_mem_region(ipw->request_common_memory.Base,
-				ipw->request_common_memory.Size);
+		release_mem_region(link->resource[2]->start,
+				resource_size(link->resource[2]));
 		iounmap(ipw->common_memory);
 	}
+	if (ipw->attr_memory) {
+		release_mem_region(link->resource[3]->start,
+				resource_size(link->resource[3]));
+		iounmap(ipw->attr_memory);
+	}
 	pcmcia_disable_device(link);
 	return -1;
 }
@@ -249,13 +220,13 @@ static int config_ipwireless(struct ipw_dev *ipw)
 static void release_ipwireless(struct ipw_dev *ipw)
 {
 	if (ipw->common_memory) {
-		release_mem_region(ipw->request_common_memory.Base,
-				ipw->request_common_memory.Size);
+		release_mem_region(ipw->link->resource[2]->start,
+				resource_size(ipw->link->resource[2]));
 		iounmap(ipw->common_memory);
 	}
 	if (ipw->attr_memory) {
-		release_mem_region(ipw->request_attr_memory.Base,
-				ipw->request_attr_memory.Size);
+		release_mem_region(ipw->link->resource[3]->start,
+				resource_size(ipw->link->resource[3]));
 		iounmap(ipw->attr_memory);
 	}
 	pcmcia_disable_device(ipw->link);
@@ -324,7 +295,7 @@ static struct pcmcia_driver me = {
 	.owner		= THIS_MODULE,
 	.probe          = ipwireless_attach,
 	.remove         = ipwireless_detach,
-	.drv = { .name  = IPWIRELESS_PCCARD_NAME },
+	.name		= IPWIRELESS_PCCARD_NAME,
 	.id_table       = ipw_ids
 };
 
@@ -336,9 +307,6 @@ static int __init init_ipwireless(void)
 {
 	int ret;
 
-	printk(KERN_INFO IPWIRELESS_PCCARD_NAME " "
-	       IPWIRELESS_PCMCIA_VERSION " by " IPWIRELESS_PCMCIA_AUTHOR "\n");
-
 	ret = ipwireless_tty_init();
 	if (ret != 0)
 		return ret;
@@ -355,9 +323,6 @@ static int __init init_ipwireless(void)
  */
 static void __exit exit_ipwireless(void)
 {
-	printk(KERN_INFO IPWIRELESS_PCCARD_NAME " "
-			IPWIRELESS_PCMCIA_VERSION " removed\n");
-
 	pcmcia_unregister_driver(&me);
 	ipwireless_tty_release();
 }

drivers/char/pcmcia/ipwireless/main.h

@@ -21,7 +21,6 @@
 #include <linux/sched.h>
 #include <linux/types.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 
@@ -45,13 +44,9 @@ struct ipw_dev {
 	struct pcmcia_device *link;
 	int is_v2_card;
 
-	window_handle_t handle_attr_memory;
 	void __iomem *attr_memory;
-	win_req_t request_attr_memory;
 
-	window_handle_t handle_common_memory;
 	void __iomem *common_memory;
-	win_req_t request_common_memory;
 
 	/* Reference to attribute memory, containing CIS data */
 	void *attribute_memory;

drivers/char/pcmcia/ipwireless/tty.h

@@ -21,7 +21,6 @@
 #include <linux/types.h>
 #include <linux/sched.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 

drivers/char/pcmcia/synclink_cs.c

@@ -70,7 +70,6 @@
 #include <linux/workqueue.h>
 #include <linux/hdlc.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -550,9 +549,6 @@ static int mgslpc_probe(struct pcmcia_device *link)
 
     /* Initialize the struct pcmcia_device structure */
 
-    link->conf.Attributes = 0;
-    link->conf.IntType = INT_MEMORY_AND_IO;
-
     ret = mgslpc_config(link);
     if (ret)
 	    return ret;
@@ -565,20 +561,8 @@ static int mgslpc_probe(struct pcmcia_device *link)
 /* Card has been inserted.
  */
 
-static int mgslpc_ioprobe(struct pcmcia_device *p_dev,
-			  cistpl_cftable_entry_t *cfg,
-			  cistpl_cftable_entry_t *dflt,
-			  unsigned int vcc,
-			  void *priv_data)
+static int mgslpc_ioprobe(struct pcmcia_device *p_dev, void *priv_data)
 {
-	if (!cfg->io.nwin)
-		return -ENODEV;
-
-	p_dev->resource[0]->start = cfg->io.win[0].base;
-	p_dev->resource[0]->end = cfg->io.win[0].len;
-	p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags);
-	p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK;
-
 	return pcmcia_request_io(p_dev);
 }
 
@@ -590,32 +574,24 @@ static int mgslpc_config(struct pcmcia_device *link)
     if (debug_level >= DEBUG_LEVEL_INFO)
 	    printk("mgslpc_config(0x%p)\n", link);
 
+    link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
+
     ret = pcmcia_loop_config(link, mgslpc_ioprobe, NULL);
     if (ret != 0)
 	    goto failed;
 
-    link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
-    link->conf.ConfigIndex = 8;
-    link->conf.Present = PRESENT_OPTION;
+    link->config_index = 8;
+    link->config_regs = PRESENT_OPTION;
 
     ret = pcmcia_request_irq(link, mgslpc_isr);
     if (ret)
 	    goto failed;
-    ret = pcmcia_request_configuration(link, &link->conf);
+    ret = pcmcia_enable_device(link);
     if (ret)
 	    goto failed;
 
     info->io_base = link->resource[0]->start;
     info->irq_level = link->irq;
-
-    dev_info(&link->dev, "index 0x%02x:",
-	    link->conf.ConfigIndex);
-    if (link->conf.Attributes & CONF_ENABLE_IRQ)
-	    printk(", irq %d", link->irq);
-    if (link->resource[0])
-	    printk(", io %pR", link->resource[0]);
-    printk("\n");
     return 0;
 
 failed:
@@ -2797,9 +2773,7 @@ MODULE_DEVICE_TABLE(pcmcia, mgslpc_ids);
 
 static struct pcmcia_driver mgslpc_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "synclink_cs",
-	},
+	.name		= "synclink_cs",
 	.probe		= mgslpc_probe,
 	.remove		= mgslpc_detach,
 	.id_table	= mgslpc_ids,
@@ -2835,8 +2809,6 @@ static void synclink_cs_cleanup(void)
 {
 	int rc;
 
-	printk("Unloading %s: version %s\n", driver_name, driver_version);
-
 	while(mgslpc_device_list)
 		mgslpc_remove_device(mgslpc_device_list);
 
@@ -2859,8 +2831,6 @@ static int __init synclink_cs_init(void)
 	    BREAKPOINT();
     }
 
-    printk("%s %s\n", driver_name, driver_version);
-
     if ((rc = pcmcia_register_driver(&mgslpc_driver)) < 0)
 	    return rc;
 
@@ -4127,6 +4097,8 @@ static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	if (cmd != SIOCWANDEV)
 		return hdlc_ioctl(dev, ifr, cmd);
 
+	memset(&new_line, 0, size);
+
 	switch(ifr->ifr_settings.type) {
 	case IF_GET_IFACE: /* return current sync_serial_settings */
 

drivers/ide/ide-cs.c

@@ -43,7 +43,6 @@
 #include <asm/io.h>
 #include <asm/system.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 #include <pcmcia/cisreg.h>
@@ -72,17 +71,6 @@ static int ide_config(struct pcmcia_device *);
 
 static void ide_detach(struct pcmcia_device *p_dev);
 
-
-
-
-/*======================================================================
-
-    ide_attach() creates an "instance" of the driver, allocating
-    local data structures for one device.  The device is registered
-    with Card Services.
-
-======================================================================*/
-
 static int ide_probe(struct pcmcia_device *link)
 {
     ide_info_t *info;
@@ -97,23 +85,12 @@ static int ide_probe(struct pcmcia_device *link)
     info->p_dev = link;
     link->priv = info;
 
-    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
-    link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
-    link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
+    link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO |
+	    CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC;
 
     return ide_config(link);
 } /* ide_attach */
 
-/*======================================================================
-
-    This deletes a driver "instance".  The device is de-registered
-    with Card Services.  If it has been released, all local data
-    structures are freed.  Otherwise, the structures will be freed
-    when the device is released.
-
-======================================================================*/
-
 static void ide_detach(struct pcmcia_device *link)
 {
     ide_info_t *info = link->priv;
@@ -187,79 +164,31 @@ static struct ide_host *idecs_register(unsigned long io, unsigned long ctl,
     return NULL;
 }
 
-/*======================================================================
-
-    ide_config() is scheduled to run after a CARD_INSERTION event
-    is received, to configure the PCMCIA socket, and to make the
-    ide device available to the system.
-
-======================================================================*/
-
-struct pcmcia_config_check {
-	unsigned long ctl_base;
-	int skip_vcc;
-	int is_kme;
-};
-
-static int pcmcia_check_one_config(struct pcmcia_device *pdev,
-				   cistpl_cftable_entry_t *cfg,
-				   cistpl_cftable_entry_t *dflt,
-				   unsigned int vcc,
-				   void *priv_data)
+static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data)
 {
-	struct pcmcia_config_check *stk = priv_data;
-
-	/* Check for matching Vcc, unless we're desperate */
-	if (!stk->skip_vcc) {
-		if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
-				return -ENODEV;
-		} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000)
-				return -ENODEV;
-		}
-	}
+	int *is_kme = priv_data;
 
-	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-		pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
-		pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
-	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		pdev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
-
-		pdev->conf.ConfigIndex = cfg->index;
-		pdev->resource[0]->start = io->win[0].base;
-		if (!(io->flags & CISTPL_IO_16BIT)) {
-			pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
-			pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
-		}
-		if (io->nwin == 2) {
-			pdev->resource[0]->end = 8;
-			pdev->resource[1]->start = io->win[1].base;
-			pdev->resource[1]->end = (stk->is_kme) ? 2 : 1;
-			if (pcmcia_request_io(pdev) != 0)
-				return -ENODEV;
-			stk->ctl_base = pdev->resource[1]->start;
-		} else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
-			pdev->resource[0]->end = io->win[0].len;
-			pdev->resource[1]->end = 0;
-			if (pcmcia_request_io(pdev) != 0)
-				return -ENODEV;
-			stk->ctl_base = pdev->resource[0]->start + 0x0e;
-		} else
+	if (!(pdev->resource[0]->flags & IO_DATA_PATH_WIDTH_8)) {
+		pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+		pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+	}
+	pdev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+	pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+
+	if (pdev->resource[1]->end) {
+		pdev->resource[0]->end = 8;
+		pdev->resource[1]->end = (*is_kme) ? 2 : 1;
+	} else {
+		if (pdev->resource[0]->end < 16)
 			return -ENODEV;
-		/* If we've got this far, we're done */
-		return 0;
 	}
-	return -ENODEV;
+
+	return pcmcia_request_io(pdev);
 }
 
 static int ide_config(struct pcmcia_device *link)
 {
     ide_info_t *info = link->priv;
-    struct pcmcia_config_check *stk = NULL;
     int ret = 0, is_kme = 0;
     unsigned long io_base, ctl_base;
     struct ide_host *host;
@@ -270,23 +199,21 @@ static int ide_config(struct pcmcia_device *link)
 	      ((link->card_id == PRODID_KME_KXLC005_A) ||
 	       (link->card_id == PRODID_KME_KXLC005_B)));
 
-    stk = kzalloc(sizeof(*stk), GFP_KERNEL);
-    if (!stk)
-	    goto err_mem;
-    stk->is_kme = is_kme;
-    stk->skip_vcc = io_base = ctl_base = 0;
-
-    if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) {
-	    stk->skip_vcc = 1;
-	    if (pcmcia_loop_config(link, pcmcia_check_one_config, stk))
+    if (pcmcia_loop_config(link, pcmcia_check_one_config, &is_kme)) {
+	    link->config_flags &= ~CONF_AUTO_CHECK_VCC;
+	    if (pcmcia_loop_config(link, pcmcia_check_one_config, &is_kme))
 		    goto failed; /* No suitable config found */
     }
     io_base = link->resource[0]->start;
-    ctl_base = stk->ctl_base;
+    if (link->resource[1]->end)
+	    ctl_base = link->resource[1]->start;
+    else
+	    ctl_base = link->resource[0]->start + 0x0e;
 
     if (!link->irq)
 	    goto failed;
-    ret = pcmcia_request_configuration(link, &link->conf);
+
+    ret = pcmcia_enable_device(link);
     if (ret)
 	    goto failed;
 
@@ -311,29 +238,15 @@ static int ide_config(struct pcmcia_device *link)
     info->host = host;
     dev_info(&link->dev, "ide-cs: hd%c: Vpp = %d.%d\n",
 	    'a' + host->ports[0]->index * 2,
-	    link->conf.Vpp / 10, link->conf.Vpp % 10);
+	    link->vpp / 10, link->vpp % 10);
 
-    kfree(stk);
     return 0;
 
-err_mem:
-    printk(KERN_NOTICE "ide-cs: ide_config failed memory allocation\n");
-    goto failed;
-
 failed:
-    kfree(stk);
     ide_release(link);
     return -ENODEV;
 } /* ide_config */
 
-/*======================================================================
-
-    After a card is removed, ide_release() will unregister the net
-    device, and release the PCMCIA configuration.  If the device is
-    still open, this will be postponed until it is closed.
-
-======================================================================*/
-
 static void ide_release(struct pcmcia_device *link)
 {
     ide_info_t *info = link->priv;
@@ -359,15 +272,6 @@ static void ide_release(struct pcmcia_device *link)
 } /* ide_release */
 
 
-/*======================================================================
-
-    The card status event handler.  Mostly, this schedules other
-    stuff to run after an event is received.  A CARD_REMOVAL event
-    also sets some flags to discourage the ide drivers from
-    talking to the ports.
-
-======================================================================*/
-
 static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_FUNC_ID(4),
 	PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000),	/* Corsair */
@@ -440,9 +344,7 @@ MODULE_DEVICE_TABLE(pcmcia, ide_ids);
 
 static struct pcmcia_driver ide_cs_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "ide-cs",
-	},
+	.name		= "ide-cs",
 	.probe		= ide_probe,
 	.remove		= ide_detach,
 	.id_table       = ide_ids,

drivers/isdn/hardware/avm/avm_cs.c

@@ -20,7 +20,6 @@
 #include <asm/io.h>
 #include <asm/system.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
 #include <pcmcia/ds.h>
@@ -39,87 +38,32 @@ MODULE_LICENSE("GPL");
 
 /*====================================================================*/
 
-/*
-   The event() function is this driver's Card Services event handler.
-   It will be called by Card Services when an appropriate card status
-   event is received.  The config() and release() entry points are
-   used to configure or release a socket, in response to card insertion
-   and ejection events.  They are invoked from the skeleton event
-   handler.
-*/
-
 static int avmcs_config(struct pcmcia_device *link);
 static void avmcs_release(struct pcmcia_device *link);
-
-/*
-   The attach() and detach() entry points are used to create and destroy
-   "instances" of the driver, where each instance represents everything
-   needed to manage one actual PCMCIA card.
-*/
-
 static void avmcs_detach(struct pcmcia_device *p_dev);
 
-/*======================================================================
-
-    avmcs_attach() creates an "instance" of the driver, allocating
-    local data structures for one device.  The device is registered
-    with Card Services.
-
-    The dev_link structure is initialized, but we don't actually
-    configure the card at this point -- we wait until we receive a
-    card insertion event.
-    
-======================================================================*/
-
 static int avmcs_probe(struct pcmcia_device *p_dev)
 {
-
-    /* The io structure describes IO port mapping */
-    p_dev->resource[0]->end = 16;
-    p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
-
     /* General socket configuration */
-    p_dev->conf.Attributes = CONF_ENABLE_IRQ;
-    p_dev->conf.IntType = INT_MEMORY_AND_IO;
-    p_dev->conf.ConfigIndex = 1;
-    p_dev->conf.Present = PRESENT_OPTION;
+    p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
+    p_dev->config_index = 1;
+    p_dev->config_regs = PRESENT_OPTION;
 
     return avmcs_config(p_dev);
 } /* avmcs_attach */
 
-/*======================================================================
-
-    This deletes a driver "instance".  The device is de-registered
-    with Card Services.  If it has been released, all local data
-    structures are freed.  Otherwise, the structures will be freed
-    when the device is released.
-
-======================================================================*/
 
 static void avmcs_detach(struct pcmcia_device *link)
 {
 	avmcs_release(link);
 } /* avmcs_detach */
 
-/*======================================================================
-
-    avmcs_config() is scheduled to run after a CARD_INSERTION event
-    is received, to configure the PCMCIA socket, and to make the
-    ethernet device available to the system.
-    
-======================================================================*/
-
-static int avmcs_configcheck(struct pcmcia_device *p_dev,
-			     cistpl_cftable_entry_t *cf,
-			     cistpl_cftable_entry_t *dflt,
-			     unsigned int vcc,
-			     void *priv_data)
+static int avmcs_configcheck(struct pcmcia_device *p_dev, void *priv_data)
 {
-	if (cf->io.nwin <= 0)
-		return -ENODEV;
+	p_dev->resource[0]->end = 16;
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 
-	p_dev->resource[0]->start = cf->io.win[0].base;
-	p_dev->resource[0]->end = cf->io.win[0].len;
 	return pcmcia_request_io(p_dev);
 }
 
@@ -150,7 +94,7 @@ static int avmcs_config(struct pcmcia_device *link)
 	/*
          * configure the PCMCIA socket
 	  */
-	i = pcmcia_request_configuration(link, &link->conf);
+	i = pcmcia_enable_device(link);
 	if (i != 0) {
 	    pcmcia_disable_device(link);
 	    break;
@@ -197,13 +141,6 @@ static int avmcs_config(struct pcmcia_device *link)
 
 } /* avmcs_config */
 
-/*======================================================================
-
-    After a card is removed, avmcs_release() will unregister the net
-    device, and release the PCMCIA configuration.  If the device is
-    still open, this will be postponed until it is closed.
-    
-======================================================================*/
 
 static void avmcs_release(struct pcmcia_device *link)
 {
@@ -222,9 +159,7 @@ MODULE_DEVICE_TABLE(pcmcia, avmcs_ids);
 
 static struct pcmcia_driver avmcs_driver = {
 	.owner	= THIS_MODULE,
-	.drv	= {
-		.name	= "avm_cs",
-	},
+	.name		= "avm_cs",
 	.probe = avmcs_probe,
 	.remove	= avmcs_detach,
 	.id_table = avmcs_ids,

drivers/isdn/hisax/avma1_cs.c

@@ -20,7 +20,6 @@
 #include <asm/io.h>
 #include <asm/system.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 #include "hisax_cfg.h"
@@ -40,67 +39,22 @@ module_param(isdnprot, int, 0);
 
 /*====================================================================*/
 
-/*
-   The event() function is this driver's Card Services event handler.
-   It will be called by Card Services when an appropriate card status
-   event is received.  The config() and release() entry points are
-   used to configure or release a socket, in response to card insertion
-   and ejection events.  They are invoked from the skeleton event
-   handler.
-*/
-
 static int avma1cs_config(struct pcmcia_device *link) __devinit ;
 static void avma1cs_release(struct pcmcia_device *link);
-
-/*
-   The attach() and detach() entry points are used to create and destroy
-   "instances" of the driver, where each instance represents everything
-   needed to manage one actual PCMCIA card.
-*/
-
 static void avma1cs_detach(struct pcmcia_device *p_dev) __devexit ;
 
-
-/*======================================================================
-
-    avma1cs_attach() creates an "instance" of the driver, allocating
-    local data structures for one device.  The device is registered
-    with Card Services.
-
-    The dev_link structure is initialized, but we don't actually
-    configure the card at this point -- we wait until we receive a
-    card insertion event.
-    
-======================================================================*/
-
 static int __devinit avma1cs_probe(struct pcmcia_device *p_dev)
 {
     dev_dbg(&p_dev->dev, "avma1cs_attach()\n");
 
-    /* The io structure describes IO port mapping */
-    p_dev->resource[0]->end = 16;
-    p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
-    p_dev->resource[1]->end = 16;
-    p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_16;
-
     /* General socket configuration */
-    p_dev->conf.Attributes = CONF_ENABLE_IRQ;
-    p_dev->conf.IntType = INT_MEMORY_AND_IO;
-    p_dev->conf.ConfigIndex = 1;
-    p_dev->conf.Present = PRESENT_OPTION;
+    p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
+    p_dev->config_index = 1;
+    p_dev->config_regs = PRESENT_OPTION;
 
     return avma1cs_config(p_dev);
 } /* avma1cs_attach */
 
-/*======================================================================
-
-    This deletes a driver "instance".  The device is de-registered
-    with Card Services.  If it has been released, all local data
-    structures are freed.  Otherwise, the structures will be freed
-    when the device is released.
-
-======================================================================*/
-
 static void __devexit avma1cs_detach(struct pcmcia_device *link)
 {
 	dev_dbg(&link->dev, "avma1cs_detach(0x%p)\n", link);
@@ -108,26 +62,13 @@ static void __devexit avma1cs_detach(struct pcmcia_device *link)
 	kfree(link->priv);
 } /* avma1cs_detach */
 
-/*======================================================================
-
-    avma1cs_config() is scheduled to run after a CARD_INSERTION event
-    is received, to configure the PCMCIA socket, and to make the
-    ethernet device available to the system.
-    
-======================================================================*/
-
-static int avma1cs_configcheck(struct pcmcia_device *p_dev,
-			       cistpl_cftable_entry_t *cf,
-			       cistpl_cftable_entry_t *dflt,
-			       unsigned int vcc,
-			       void *priv_data)
+static int avma1cs_configcheck(struct pcmcia_device *p_dev, void *priv_data)
 {
-	if (cf->io.nwin <= 0)
-		return -ENODEV;
-
-	p_dev->resource[0]->start = cf->io.win[0].base;
-	p_dev->resource[0]->end = cf->io.win[0].len;
+	p_dev->resource[0]->end = 16;
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 	p_dev->io_lines = 5;
+
 	return pcmcia_request_io(p_dev);
 }
 
@@ -161,7 +102,7 @@ static int __devinit avma1cs_config(struct pcmcia_device *link)
 	/*
 	 * configure the PCMCIA socket
 	 */
-	i = pcmcia_request_configuration(link, &link->conf);
+	i = pcmcia_enable_device(link);
 	if (i != 0) {
 	    pcmcia_disable_device(link);
 	    break;
@@ -175,9 +116,6 @@ static int __devinit avma1cs_config(struct pcmcia_device *link)
 	return -ENODEV;
     }
 
-    printk(KERN_NOTICE "avma1_cs: checking at i/o %#x, irq %d\n",
-		(unsigned int) link->resource[0]->start, link->irq);
-
     icard.para[0] = link->irq;
     icard.para[1] = link->resource[0]->start;
     icard.protocol = isdnprot;
@@ -196,14 +134,6 @@ static int __devinit avma1cs_config(struct pcmcia_device *link)
     return 0;
 } /* avma1cs_config */
 
-/*======================================================================
-
-    After a card is removed, avma1cs_release() will unregister the net
-    device, and release the PCMCIA configuration.  If the device is
-    still open, this will be postponed until it is closed.
-    
-======================================================================*/
-
 static void avma1cs_release(struct pcmcia_device *link)
 {
 	unsigned long minor = (unsigned long) link->priv;
@@ -216,7 +146,6 @@ static void avma1cs_release(struct pcmcia_device *link)
 	pcmcia_disable_device(link);
 } /* avma1cs_release */
 
-
 static struct pcmcia_device_id avma1cs_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("AVM", "ISDN A", 0x95d42008, 0xadc9d4bb),
 	PCMCIA_DEVICE_PROD_ID12("ISDN", "CARD", 0x8d9761c8, 0x01c5aa7b),
@@ -226,19 +155,15 @@ MODULE_DEVICE_TABLE(pcmcia, avma1cs_ids);
 
 static struct pcmcia_driver avma1cs_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "avma1_cs",
-	},
+	.name		= "avma1_cs",
 	.probe		= avma1cs_probe,
 	.remove		= __devexit_p(avma1cs_detach),
 	.id_table	= avma1cs_ids,
 };
 
-/*====================================================================*/
-
 static int __init init_avma1_cs(void)
 {
-	return(pcmcia_register_driver(&avma1cs_driver));
+	return pcmcia_register_driver(&avma1cs_driver);
 }
 
 static void __exit exit_avma1_cs(void)

drivers/isdn/hisax/elsa_cs.c

@@ -46,7 +46,6 @@
 #include <asm/io.h>
 #include <asm/system.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -64,26 +63,8 @@ MODULE_LICENSE("Dual MPL/GPL");
 static int protocol = 2;        /* EURO-ISDN Default */
 module_param(protocol, int, 0);
 
-/*====================================================================*/
-
-/*
-   The event() function is this driver's Card Services event handler.
-   It will be called by Card Services when an appropriate card status
-   event is received.  The config() and release() entry points are
-   used to configure or release a socket, in response to card insertion
-   and ejection events.  They are invoked from the elsa_cs event
-   handler.
-*/
-
 static int elsa_cs_config(struct pcmcia_device *link) __devinit ;
 static void elsa_cs_release(struct pcmcia_device *link);
-
-/*
-   The attach() and detach() entry points are used to create and destroy
-   "instances" of the driver, where each instance represents everything
-   needed to manage one actual PCMCIA card.
-*/
-
 static void elsa_cs_detach(struct pcmcia_device *p_dev) __devexit;
 
 typedef struct local_info_t {
@@ -92,18 +73,6 @@ typedef struct local_info_t {
     int			cardnr;
 } local_info_t;
 
-/*======================================================================
-
-    elsa_cs_attach() creates an "instance" of the driver, allocatingx
-    local data structures for one device.  The device is registered
-    with Card Services.
-
-    The dev_link structure is initialized, but we don't actually
-    configure the card at this point -- we wait until we receive a
-    card insertion event.
-
-======================================================================*/
-
 static int __devinit elsa_cs_probe(struct pcmcia_device *link)
 {
     local_info_t *local;
@@ -119,31 +88,9 @@ static int __devinit elsa_cs_probe(struct pcmcia_device *link)
 
     local->cardnr = -1;
 
-    /*
-      General socket configuration defaults can go here.  In this
-      client, we assume very little, and rely on the CIS for almost
-      everything.  In most clients, many details (i.e., number, sizes,
-      and attributes of IO windows) are fixed by the nature of the
-      device, and can be hard-wired here.
-    */
-    link->resource[0]->end = 8;
-    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
-
-    link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
-
     return elsa_cs_config(link);
 } /* elsa_cs_attach */
 
-/*======================================================================
-
-    This deletes a driver "instance".  The device is de-registered
-    with Card Services.  If it has been released, all local data
-    structures are freed.  Otherwise, the structures will be freed
-    when the device is released.
-
-======================================================================*/
-
 static void __devexit elsa_cs_detach(struct pcmcia_device *link)
 {
 	local_info_t *info = link->priv;
@@ -156,27 +103,17 @@ static void __devexit elsa_cs_detach(struct pcmcia_device *link)
 	kfree(info);
 } /* elsa_cs_detach */
 
-/*======================================================================
-
-    elsa_cs_config() is scheduled to run after a CARD_INSERTION event
-    is received, to configure the PCMCIA socket, and to make the
-    device available to the system.
-
-======================================================================*/
-
-static int elsa_cs_configcheck(struct pcmcia_device *p_dev,
-			       cistpl_cftable_entry_t *cf,
-			       cistpl_cftable_entry_t *dflt,
-			       unsigned int vcc,
-			       void *priv_data)
+static int elsa_cs_configcheck(struct pcmcia_device *p_dev, void *priv_data)
 {
 	int j;
 
 	p_dev->io_lines = 3;
+	p_dev->resource[0]->end = 8;
+	p_dev->resource[0]->flags &= IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 
-	if ((cf->io.nwin > 0) && cf->io.win[0].base) {
+	if ((p_dev->resource[0]->end) && p_dev->resource[0]->start) {
 		printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n");
-		p_dev->resource[0]->start = cf->io.win[0].base;
 		if (!pcmcia_request_io(p_dev))
 			return 0;
 	} else {
@@ -199,6 +136,8 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link)
     dev_dbg(&link->dev, "elsa_config(0x%p)\n", link);
     dev = link->priv;
 
+    link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
+
     i = pcmcia_loop_config(link, elsa_cs_configcheck, NULL);
     if (i != 0)
 	goto failed;
@@ -206,21 +145,10 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link)
     if (!link->irq)
 	goto failed;
 
-    i = pcmcia_request_configuration(link, &link->conf);
+    i = pcmcia_enable_device(link);
     if (i != 0)
 	goto failed;
 
-    /* Finally, report what we've done */
-    dev_info(&link->dev, "index 0x%02x: ",
-	    link->conf.ConfigIndex);
-    if (link->conf.Attributes & CONF_ENABLE_IRQ)
-	printk(", irq %d", link->irq);
-    if (link->resource[0])
-	printk(" & %pR", link->resource[0]);
-    if (link->resource[1])
-	printk(" & %pR", link->resource[1]);
-    printk("\n");
-
     icard.para[0] = link->irq;
     icard.para[1] = link->resource[0]->start;
     icard.protocol = protocol;
@@ -240,14 +168,6 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link)
     return -ENODEV;
 } /* elsa_cs_config */
 
-/*======================================================================
-
-    After a card is removed, elsa_cs_release() will unregister the net
-    device, and release the PCMCIA configuration.  If the device is
-    still open, this will be postponed until it is closed.
-
-======================================================================*/
-
 static void elsa_cs_release(struct pcmcia_device *link)
 {
     local_info_t *local = link->priv;
@@ -291,9 +211,7 @@ MODULE_DEVICE_TABLE(pcmcia, elsa_ids);
 
 static struct pcmcia_driver elsa_cs_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "elsa_cs",
-	},
+	.name		= "elsa_cs",
 	.probe		= elsa_cs_probe,
 	.remove		= __devexit_p(elsa_cs_detach),
 	.id_table	= elsa_ids,

drivers/isdn/hisax/sedlbauer_cs.c

@@ -46,7 +46,6 @@
 #include <asm/io.h>
 #include <asm/system.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -64,26 +63,9 @@ MODULE_LICENSE("Dual MPL/GPL");
 static int protocol = 2;        /* EURO-ISDN Default */
 module_param(protocol, int, 0);
 
-/*====================================================================*/
-
-/*
-   The event() function is this driver's Card Services event handler.
-   It will be called by Card Services when an appropriate card status
-   event is received.  The config() and release() entry points are
-   used to configure or release a socket, in response to card
-   insertion and ejection events.  They are invoked from the sedlbauer
-   event handler. 
-*/
-
 static int sedlbauer_config(struct pcmcia_device *link) __devinit ;
 static void sedlbauer_release(struct pcmcia_device *link);
 
-/*
-   The attach() and detach() entry points are used to create and destroy
-   "instances" of the driver, where each instance represents everything
-   needed to manage one actual PCMCIA card.
-*/
-
 static void sedlbauer_detach(struct pcmcia_device *p_dev) __devexit;
 
 typedef struct local_info_t {
@@ -92,18 +74,6 @@ typedef struct local_info_t {
     int			cardnr;
 } local_info_t;
 
-/*======================================================================
-
-    sedlbauer_attach() creates an "instance" of the driver, allocating
-    local data structures for one device.  The device is registered
-    with Card Services.
-
-    The dev_link structure is initialized, but we don't actually
-    configure the card at this point -- we wait until we receive a
-    card insertion event.
-    
-======================================================================*/
-
 static int __devinit sedlbauer_probe(struct pcmcia_device *link)
 {
     local_info_t *local;
@@ -118,35 +88,9 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link)
     local->p_dev = link;
     link->priv = local;
 
-    /*
-      General socket configuration defaults can go here.  In this
-      client, we assume very little, and rely on the CIS for almost
-      everything.  In most clients, many details (i.e., number, sizes,
-      and attributes of IO windows) are fixed by the nature of the
-      device, and can be hard-wired here.
-    */
-
-    /* from old sedl_cs 
-    */
-    /* The io structure describes IO port mapping */
-    link->resource[0]->end = 8;
-    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
-
-    link->conf.Attributes = 0;
-    link->conf.IntType = INT_MEMORY_AND_IO;
-
     return sedlbauer_config(link);
 } /* sedlbauer_attach */
 
-/*======================================================================
-
-    This deletes a driver "instance".  The device is de-registered
-    with Card Services.  If it has been released, all local data
-    structures are freed.  Otherwise, the structures will be freed
-    when the device is released.
-
-======================================================================*/
-
 static void __devexit sedlbauer_detach(struct pcmcia_device *link)
 {
 	dev_dbg(&link->dev, "sedlbauer_detach(0x%p)\n", link);
@@ -158,70 +102,15 @@ static void __devexit sedlbauer_detach(struct pcmcia_device *link)
 	kfree(link->priv);
 } /* sedlbauer_detach */
 
-/*======================================================================
-
-    sedlbauer_config() is scheduled to run after a CARD_INSERTION event
-    is received, to configure the PCMCIA socket, and to make the
-    device available to the system.
-    
-======================================================================*/
-static int sedlbauer_config_check(struct pcmcia_device *p_dev,
-				  cistpl_cftable_entry_t *cfg,
-				  cistpl_cftable_entry_t *dflt,
-				  unsigned int vcc,
-				  void *priv_data)
+static int sedlbauer_config_check(struct pcmcia_device *p_dev, void *priv_data)
 {
-	if (cfg->index == 0)
-		return -ENODEV;
-
-	/* Does this card need audio output? */
-	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
-		p_dev->conf.Status = CCSR_AUDIO_ENA;
-	}
+	if (p_dev->config_index == 0)
+		return -EINVAL;
 
-	/* Use power settings for Vcc and Vpp if present */
-	/*  Note that the CIS values need to be rescaled */
-	if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
-		if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000)
-			return -ENODEV;
-	} else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) {
-		if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM]/10000)
-			return -ENODEV;
-	}
-
-	if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
-	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
-
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
-
-	/* IO window settings */
-	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
-	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->resource[0]->start = io->win[0].base;
-		p_dev->resource[0]->end = io->win[0].len;
-		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
-		p_dev->resource[0]->flags |=
-					pcmcia_io_cfg_data_width(io->flags);
-		if (io->nwin > 1) {
-			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
-			p_dev->resource[1]->start = io->win[1].base;
-			p_dev->resource[1]->end = io->win[1].len;
-		}
-		/* This reserves IO space but doesn't actually enable it */
-		p_dev->io_lines = 3;
-		if (pcmcia_request_io(p_dev) != 0)
-			return -ENODEV;
-	}
-
-	return 0;
+	p_dev->io_lines = 3;
+	return pcmcia_request_io(p_dev);
 }
 
-
-
 static int __devinit sedlbauer_config(struct pcmcia_device *link)
 {
     int ret;
@@ -229,44 +118,17 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
 
     dev_dbg(&link->dev, "sedlbauer_config(0x%p)\n", link);
 
-    /*
-      In this loop, we scan the CIS for configuration table entries,
-      each of which describes a valid card configuration, including
-      voltage, IO window, memory window, and interrupt settings.
-
-      We make no assumptions about the card to be configured: we use
-      just the information available in the CIS.  In an ideal world,
-      this would work for any PCMCIA card, but it requires a complete
-      and accurate CIS.  In practice, a driver usually "knows" most of
-      these things without consulting the CIS, and most client drivers
-      will only use the CIS to fill in implementation-defined details.
-    */
+    link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_CHECK_VCC |
+	    CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IO;
+
     ret = pcmcia_loop_config(link, sedlbauer_config_check, NULL);
     if (ret)
 	    goto failed;
 
-    /*
-       This actually configures the PCMCIA socket -- setting up
-       the I/O windows and the interrupt mapping, and putting the
-       card and host interface into "Memory and IO" mode.
-    */
-    ret = pcmcia_request_configuration(link, &link->conf);
+    ret = pcmcia_enable_device(link);
     if (ret)
 	    goto failed;
 
-    /* Finally, report what we've done */
-    dev_info(&link->dev, "index 0x%02x:",
-	   link->conf.ConfigIndex);
-    if (link->conf.Vpp)
-	printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
-    if (link->conf.Attributes & CONF_ENABLE_IRQ)
-	printk(", irq %d", link->irq);
-    if (link->resource[0])
-	printk(" & %pR", link->resource[0]);
-    if (link->resource[1])
-	printk(" & %pR", link->resource[1]);
-    printk("\n");
-
     icard.para[0] = link->irq;
     icard.para[1] = link->resource[0]->start;
     icard.protocol = protocol;
@@ -290,14 +152,6 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
 
 } /* sedlbauer_config */
 
-/*======================================================================
-
-    After a card is removed, sedlbauer_release() will unregister the
-    device, and release the PCMCIA configuration.  If the device is
-    still open, this will be postponed until it is closed.
-    
-======================================================================*/
-
 static void sedlbauer_release(struct pcmcia_device *link)
 {
     local_info_t *local = link->priv;
@@ -346,9 +200,7 @@ MODULE_DEVICE_TABLE(pcmcia, sedlbauer_ids);
 
 static struct pcmcia_driver sedlbauer_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "sedlbauer_cs",
-	},
+	.name		= "sedlbauer_cs",
 	.probe		= sedlbauer_probe,
 	.remove		= __devexit_p(sedlbauer_detach),
 	.id_table	= sedlbauer_ids,

drivers/isdn/hisax/teles_cs.c

@@ -27,7 +27,6 @@
 #include <asm/io.h>
 #include <asm/system.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -45,26 +44,8 @@ MODULE_LICENSE("GPL");
 static int protocol = 2;        /* EURO-ISDN Default */
 module_param(protocol, int, 0);
 
-/*====================================================================*/
-
-/*
-   The event() function is this driver's Card Services event handler.
-   It will be called by Card Services when an appropriate card status
-   event is received.  The config() and release() entry points are
-   used to configure or release a socket, in response to card insertion
-   and ejection events.  They are invoked from the teles_cs event
-   handler.
-*/
-
 static int teles_cs_config(struct pcmcia_device *link) __devinit ;
 static void teles_cs_release(struct pcmcia_device *link);
-
-/*
-   The attach() and detach() entry points are used to create and destroy
-   "instances" of the driver, where each instance represents everything
-   needed to manage one actual PCMCIA card.
-*/
-
 static void teles_detach(struct pcmcia_device *p_dev) __devexit ;
 
 typedef struct local_info_t {
@@ -73,18 +54,6 @@ typedef struct local_info_t {
     int			cardnr;
 } local_info_t;
 
-/*======================================================================
-
-    teles_attach() creates an "instance" of the driver, allocatingx
-    local data structures for one device.  The device is registered
-    with Card Services.
-
-    The dev_link structure is initialized, but we don't actually
-    configure the card at this point -- we wait until we receive a
-    card insertion event.
-
-======================================================================*/
-
 static int __devinit teles_probe(struct pcmcia_device *link)
 {
     local_info_t *local;
@@ -99,31 +68,11 @@ static int __devinit teles_probe(struct pcmcia_device *link)
     local->p_dev = link;
     link->priv = local;
 
-    /*
-      General socket configuration defaults can go here.  In this
-      client, we assume very little, and rely on the CIS for almost
-      everything.  In most clients, many details (i.e., number, sizes,
-      and attributes of IO windows) are fixed by the nature of the
-      device, and can be hard-wired here.
-    */
-    link->resource[0]->end = 96;
-    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
-
-    link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
+    link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
 
     return teles_cs_config(link);
 } /* teles_attach */
 
-/*======================================================================
-
-    This deletes a driver "instance".  The device is de-registered
-    with Card Services.  If it has been released, all local data
-    structures are freed.  Otherwise, the structures will be freed
-    when the device is released.
-
-======================================================================*/
-
 static void __devexit teles_detach(struct pcmcia_device *link)
 {
 	local_info_t *info = link->priv;
@@ -136,27 +85,17 @@ static void __devexit teles_detach(struct pcmcia_device *link)
 	kfree(info);
 } /* teles_detach */
 
-/*======================================================================
-
-    teles_cs_config() is scheduled to run after a CARD_INSERTION event
-    is received, to configure the PCMCIA socket, and to make the
-    device available to the system.
-
-======================================================================*/
-
-static int teles_cs_configcheck(struct pcmcia_device *p_dev,
-				cistpl_cftable_entry_t *cf,
-				cistpl_cftable_entry_t *dflt,
-				unsigned int vcc,
-				void *priv_data)
+static int teles_cs_configcheck(struct pcmcia_device *p_dev, void *priv_data)
 {
 	int j;
 
 	p_dev->io_lines = 5;
+	p_dev->resource[0]->end = 96;
+	p_dev->resource[0]->flags &= IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 
-	if ((cf->io.nwin > 0) && cf->io.win[0].base) {
+	if ((p_dev->resource[0]->end) && p_dev->resource[0]->start) {
 		printk(KERN_INFO "(teles_cs: looks like the 96 model)\n");
-		p_dev->resource[0]->start = cf->io.win[0].base;
 		if (!pcmcia_request_io(p_dev))
 			return 0;
 	} else {
@@ -186,21 +125,10 @@ static int __devinit teles_cs_config(struct pcmcia_device *link)
     if (!link->irq)
         goto cs_failed;
 
-    i = pcmcia_request_configuration(link, &link->conf);
+    i = pcmcia_enable_device(link);
     if (i != 0)
       goto cs_failed;
 
-    /* Finally, report what we've done */
-    dev_info(&link->dev, "index 0x%02x:",
-	    link->conf.ConfigIndex);
-    if (link->conf.Attributes & CONF_ENABLE_IRQ)
-	    printk(", irq %d", link->irq);
-    if (link->resource[0])
-	printk(" & %pR", link->resource[0]);
-    if (link->resource[1])
-	printk(" & %pR", link->resource[1]);
-    printk("\n");
-
     icard.para[0] = link->irq;
     icard.para[1] = link->resource[0]->start;
     icard.protocol = protocol;
@@ -222,14 +150,6 @@ static int __devinit teles_cs_config(struct pcmcia_device *link)
     return -ENODEV;
 } /* teles_cs_config */
 
-/*======================================================================
-
-    After a card is removed, teles_cs_release() will unregister the net
-    device, and release the PCMCIA configuration.  If the device is
-    still open, this will be postponed until it is closed.
-
-======================================================================*/
-
 static void teles_cs_release(struct pcmcia_device *link)
 {
     local_info_t *local = link->priv;
@@ -273,9 +193,7 @@ MODULE_DEVICE_TABLE(pcmcia, teles_ids);
 
 static struct pcmcia_driver teles_cs_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "teles_cs",
-	},
+	.name		= "teles_cs",
 	.probe		= teles_probe,
 	.remove		= __devexit_p(teles_detach),
 	.id_table       = teles_ids,

drivers/mmc/host/sdricoh_cs.c

@@ -30,7 +30,6 @@
 #include <linux/ioport.h>
 #include <linux/scatterlist.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 #include <linux/io.h>
@@ -536,9 +535,7 @@ static int sdricoh_pcmcia_resume(struct pcmcia_device *link)
 #endif
 
 static struct pcmcia_driver sdricoh_driver = {
-	.drv = {
-		.name = DRIVER_NAME,
-		},
+	.name = DRIVER_NAME,
 	.probe = sdricoh_pcmcia_probe,
 	.remove = sdricoh_pcmcia_detach,
 	.id_table = pcmcia_ids,

drivers/mtd/maps/pcmciamtd.c

@@ -16,7 +16,6 @@
 #include <asm/io.h>
 #include <asm/system.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 
@@ -101,7 +100,7 @@ MODULE_PARM_DESC(mem_type, "Set Memory type (0=Flash, 1=RAM, 2=ROM, default=0)")
 static caddr_t remap_window(struct map_info *map, unsigned long to)
 {
 	struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
-	window_handle_t win = (window_handle_t)map->map_priv_2;
+	struct resource *win = (struct resource *) map->map_priv_2;
 	unsigned int offset;
 	int ret;
 
@@ -316,30 +315,19 @@ static void pcmciamtd_set_vpp(struct map_info *map, int on)
 {
 	struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
 	struct pcmcia_device *link = dev->p_dev;
-	modconf_t mod;
-	int ret;
-
-	mod.Attributes = CONF_VPP1_CHANGE_VALID | CONF_VPP2_CHANGE_VALID;
-	mod.Vcc = 0;
-	mod.Vpp1 = mod.Vpp2 = on ? dev->vpp : 0;
 
 	DEBUG(2, "dev = %p on = %d vpp = %d\n", dev, on, dev->vpp);
-	ret = pcmcia_modify_configuration(link, &mod);
+	pcmcia_fixup_vpp(link, on ? dev->vpp : 0);
 }
 
 
-/* After a card is removed, pcmciamtd_release() will unregister the
- * device, and release the PCMCIA configuration.  If the device is
- * still open, this will be postponed until it is closed.
- */
-
 static void pcmciamtd_release(struct pcmcia_device *link)
 {
 	struct pcmciamtd_dev *dev = link->priv;
 
 	DEBUG(3, "link = 0x%p", link);
 
-	if (link->win) {
+	if (link->resource[2]->end) {
 		if(dev->win_base) {
 			iounmap(dev->win_base);
 			dev->win_base = NULL;
@@ -482,18 +470,12 @@ static void card_settings(struct pcmciamtd_dev *dev, struct pcmcia_device *p_dev
 }
 
 
-/* pcmciamtd_config() is scheduled to run after a CARD_INSERTION event
- * is received, to configure the PCMCIA socket, and to make the
- * MTD device available to the system.
- */
-
 static int pcmciamtd_config(struct pcmcia_device *link)
 {
 	struct pcmciamtd_dev *dev = link->priv;
 	struct mtd_info *mtd = NULL;
-	win_req_t req;
 	int ret;
-	int i;
+	int i, j = 0;
 	static char *probes[] = { "jedec_probe", "cfi_probe" };
 	int new_name = 0;
 
@@ -520,28 +502,34 @@ static int pcmciamtd_config(struct pcmcia_device *link)
 	 * smaller windows until we succeed
 	 */
 
-	req.Attributes =  WIN_MEMORY_TYPE_CM | WIN_ENABLE;
-	req.Attributes |= (dev->pcmcia_map.bankwidth == 1) ? WIN_DATA_WIDTH_8 : WIN_DATA_WIDTH_16;
-	req.Base = 0;
-	req.AccessSpeed = mem_speed;
-	link->win = (window_handle_t)link;
-	req.Size = (force_size) ? force_size << 20 : MAX_PCMCIA_ADDR;
+	link->resource[2]->flags |=  WIN_MEMORY_TYPE_CM | WIN_ENABLE;
+	link->resource[2]->flags |= (dev->pcmcia_map.bankwidth == 1) ?
+					WIN_DATA_WIDTH_8 : WIN_DATA_WIDTH_16;
+	link->resource[2]->start = 0;
+	link->resource[2]->end = (force_size) ? force_size << 20 :
+					MAX_PCMCIA_ADDR;
 	dev->win_size = 0;
 
 	do {
 		int ret;
-		DEBUG(2, "requesting window with size = %dKiB memspeed = %d",
-		      req.Size >> 10, req.AccessSpeed);
-		ret = pcmcia_request_window(link, &req, &link->win);
+		DEBUG(2, "requesting window with size = %luKiB memspeed = %d",
+			(unsigned long) resource_size(link->resource[2]) >> 10,
+			mem_speed);
+		ret = pcmcia_request_window(link, link->resource[2], mem_speed);
 		DEBUG(2, "ret = %d dev->win_size = %d", ret, dev->win_size);
 		if(ret) {
-			req.Size >>= 1;
+			j++;
+			link->resource[2]->start = 0;
+			link->resource[2]->end = (force_size) ?
+					force_size << 20 : MAX_PCMCIA_ADDR;
+			link->resource[2]->end >>= j;
 		} else {
-			DEBUG(2, "Got window of size %dKiB", req.Size >> 10);
-			dev->win_size = req.Size;
+			DEBUG(2, "Got window of size %luKiB", (unsigned long)
+				resource_size(link->resource[2]) >> 10);
+			dev->win_size = resource_size(link->resource[2]);
 			break;
 		}
-	} while(req.Size >= 0x1000);
+	} while (link->resource[2]->end >= 0x1000);
 
 	DEBUG(2, "dev->win_size = %d", dev->win_size);
 
@@ -553,33 +541,31 @@ static int pcmciamtd_config(struct pcmcia_device *link)
 	DEBUG(1, "Allocated a window of %dKiB", dev->win_size >> 10);
 
 	/* Get write protect status */
-	DEBUG(2, "window handle = 0x%8.8lx", (unsigned long)link->win);
-	dev->win_base = ioremap(req.Base, req.Size);
+	dev->win_base = ioremap(link->resource[2]->start,
+				resource_size(link->resource[2]));
 	if(!dev->win_base) {
-		dev_err(&dev->p_dev->dev, "ioremap(%lu, %u) failed\n",
-			req.Base, req.Size);
+		dev_err(&dev->p_dev->dev, "ioremap(%pR) failed\n",
+			link->resource[2]);
 		pcmciamtd_release(link);
 		return -ENODEV;
 	}
-	DEBUG(1, "mapped window dev = %p req.base = 0x%lx base = %p size = 0x%x",
-	      dev, req.Base, dev->win_base, req.Size);
+	DEBUG(1, "mapped window dev = %p @ %pR, base = %p",
+	      dev, link->resource[2], dev->win_base);
 
 	dev->offset = 0;
 	dev->pcmcia_map.map_priv_1 = (unsigned long)dev;
-	dev->pcmcia_map.map_priv_2 = (unsigned long)link->win;
+	dev->pcmcia_map.map_priv_2 = (unsigned long)link->resource[2];
 
 	dev->vpp = (vpp) ? vpp : link->socket->socket.Vpp;
-	link->conf.Attributes = 0;
 	if(setvpp == 2) {
-		link->conf.Vpp = dev->vpp;
+		link->vpp = dev->vpp;
 	} else {
-		link->conf.Vpp = 0;
+		link->vpp = 0;
 	}
 
-	link->conf.IntType = INT_MEMORY;
-	link->conf.ConfigIndex = 0;
+	link->config_index = 0;
 	DEBUG(2, "Setting Configuration");
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret != 0) {
 		if (dev->win_base) {
 			iounmap(dev->win_base);
@@ -680,12 +666,6 @@ static int pcmciamtd_resume(struct pcmcia_device *dev)
 }
 
 
-/* This deletes a driver "instance".  The device is de-registered
- * with Card Services.  If it has been released, all local data
- * structures are freed.  Otherwise, the structures will be freed
- * when the device is released.
- */
-
 static void pcmciamtd_detach(struct pcmcia_device *link)
 {
 	struct pcmciamtd_dev *dev = link->priv;
@@ -703,11 +683,6 @@ static void pcmciamtd_detach(struct pcmcia_device *link)
 }
 
 
-/* pcmciamtd_attach() creates an "instance" of the driver, allocating
- * local data structures for one device.  The device is registered
- * with Card Services.
- */
-
 static int pcmciamtd_probe(struct pcmcia_device *link)
 {
 	struct pcmciamtd_dev *dev;
@@ -720,9 +695,6 @@ static int pcmciamtd_probe(struct pcmcia_device *link)
 	dev->p_dev = link;
 	link->priv = dev;
 
-	link->conf.Attributes = 0;
-	link->conf.IntType = INT_MEMORY;
-
 	return pcmciamtd_config(link);
 }
 
@@ -757,9 +729,7 @@ static struct pcmcia_device_id pcmciamtd_ids[] = {
 MODULE_DEVICE_TABLE(pcmcia, pcmciamtd_ids);
 
 static struct pcmcia_driver pcmciamtd_driver = {
-	.drv		= {
-		.name	= "pcmciamtd"
-	},
+	.name		= "pcmciamtd",
 	.probe		= pcmciamtd_probe,
 	.remove		= pcmciamtd_detach,
 	.owner		= THIS_MODULE,
@@ -771,8 +741,6 @@ static struct pcmcia_driver pcmciamtd_driver = {
 
 static int __init init_pcmciamtd(void)
 {
-	info(DRIVER_DESC);
-
 	if(bankwidth && bankwidth != 1 && bankwidth != 2) {
 		info("bad bankwidth (%d), using default", bankwidth);
 		bankwidth = 2;

drivers/net/pcmcia/3c574_cs.c

@@ -87,7 +87,6 @@ earlier 3Com products.
 #include <linux/bitops.h>
 #include <linux/mii.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ciscode.h>
@@ -280,25 +279,15 @@ static int tc574_probe(struct pcmcia_device *link)
 	spin_lock_init(&lp->window_lock);
 	link->resource[0]->end = 32;
 	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
-	link->conf.Attributes = CONF_ENABLE_IRQ;
-	link->conf.IntType = INT_MEMORY_AND_IO;
-	link->conf.ConfigIndex = 1;
+	link->config_flags |= CONF_ENABLE_IRQ;
+	link->config_index = 1;
 
 	dev->netdev_ops = &el3_netdev_ops;
 	SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
 	dev->watchdog_timeo = TX_TIMEOUT;
 
 	return tc574_config(link);
-} /* tc574_attach */
-
-/*
-
-	This deletes a driver "instance".  The device is de-registered
-	with Card Services.  If it has been released, all local data
-	structures are freed.  Otherwise, the structures will be freed
-	when the device is released.
-
-*/
+}
 
 static void tc574_detach(struct pcmcia_device *link)
 {
@@ -313,12 +302,6 @@ static void tc574_detach(struct pcmcia_device *link)
 	free_netdev(dev);
 } /* tc574_detach */
 
-/*
-	tc574_config() is scheduled to run after a CARD_INSERTION event
-	is received, to configure the PCMCIA socket, and to make the
-	ethernet device available to the system.
-*/
-
 static const char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
 
 static int tc574_config(struct pcmcia_device *link)
@@ -352,7 +335,7 @@ static int tc574_config(struct pcmcia_device *link)
 	if (ret)
 		goto failed;
 
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 
@@ -465,12 +448,6 @@ static int tc574_config(struct pcmcia_device *link)
 
 } /* tc574_config */
 
-/*
-	After a card is removed, tc574_release() will unregister the net
-	device, and release the PCMCIA configuration.  If the device is
-	still open, this will be postponed until it is closed.
-*/
-
 static void tc574_release(struct pcmcia_device *link)
 {
 	pcmcia_disable_device(link);
@@ -1198,9 +1175,7 @@ MODULE_DEVICE_TABLE(pcmcia, tc574_ids);
 
 static struct pcmcia_driver tc574_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "3c574_cs",
-	},
+	.name		= "3c574_cs",
 	.probe		= tc574_probe,
 	.remove		= tc574_detach,
 	.id_table       = tc574_ids,

drivers/net/pcmcia/3c589_cs.c

@@ -41,7 +41,6 @@
 #include <linux/bitops.h>
 #include <linux/jiffies.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ciscode.h>
@@ -176,14 +175,6 @@ static const struct ethtool_ops netdev_ethtool_ops;
 
 static void tc589_detach(struct pcmcia_device *p_dev);
 
-/*======================================================================
-
-    tc589_attach() creates an "instance" of the driver, allocating
-    local data structures for one device.  The device is registered
-    with Card Services.
-
-======================================================================*/
-
 static const struct net_device_ops el3_netdev_ops = {
 	.ndo_open		= el3_open,
 	.ndo_stop		= el3_close,
@@ -216,9 +207,8 @@ static int tc589_probe(struct pcmcia_device *link)
     link->resource[0]->end = 16;
     link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
 
-    link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
-    link->conf.ConfigIndex = 1;
+    link->config_flags |= CONF_ENABLE_IRQ;
+    link->config_index = 1;
 
     dev->netdev_ops = &el3_netdev_ops;
     dev->watchdog_timeo = TX_TIMEOUT;
@@ -226,16 +216,7 @@ static int tc589_probe(struct pcmcia_device *link)
     SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
 
     return tc589_config(link);
-} /* tc589_attach */
-
-/*======================================================================
-
-    This deletes a driver "instance".  The device is de-registered
-    with Card Services.  If it has been released, all local data
-    structures are freed.  Otherwise, the structures will be freed
-    when the device is released.
-
-======================================================================*/
+}
 
 static void tc589_detach(struct pcmcia_device *link)
 {
@@ -250,14 +231,6 @@ static void tc589_detach(struct pcmcia_device *link)
     free_netdev(dev);
 } /* tc589_detach */
 
-/*======================================================================
-
-    tc589_config() is scheduled to run after a CARD_INSERTION event
-    is received, to configure the PCMCIA socket, and to make the
-    ethernet device available to the system.
-
-======================================================================*/
-
 static int tc589_config(struct pcmcia_device *link)
 {
     struct net_device *dev = link->priv;
@@ -294,7 +267,7 @@ static int tc589_config(struct pcmcia_device *link)
     if (ret)
 	    goto failed;
 
-    ret = pcmcia_request_configuration(link, &link->conf);
+    ret = pcmcia_enable_device(link);
     if (ret)
 	    goto failed;
 
@@ -352,14 +325,6 @@ static int tc589_config(struct pcmcia_device *link)
     return -ENODEV;
 } /* tc589_config */
 
-/*======================================================================
-
-    After a card is removed, tc589_release() will unregister the net
-    device, and release the PCMCIA configuration.  If the device is
-    still open, this will be postponed until it is closed.
-
-======================================================================*/
-
 static void tc589_release(struct pcmcia_device *link)
 {
 	pcmcia_disable_device(link);
@@ -955,9 +920,7 @@ MODULE_DEVICE_TABLE(pcmcia, tc589_ids);
 
 static struct pcmcia_driver tc589_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "3c589_cs",
-	},
+	.name		= "3c589_cs",
 	.probe		= tc589_probe,
 	.remove		= tc589_detach,
 	.id_table	= tc589_ids,

drivers/net/pcmcia/axnet_cs.c

@@ -39,7 +39,6 @@
 #include <linux/mii.h>
 #include "../8390.h"
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
 #include <pcmcia/ds.h>
@@ -140,14 +139,6 @@ static const struct net_device_ops axnet_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 };
 
-/*======================================================================
-
-    axnet_attach() creates an "instance" of the driver, allocating
-    local data structures for one device.  The device is registered
-    with Card Services.
-
-======================================================================*/
-
 static int axnet_probe(struct pcmcia_device *link)
 {
     axnet_dev_t *info;
@@ -166,8 +157,7 @@ static int axnet_probe(struct pcmcia_device *link)
     info = PRIV(dev);
     info->p_dev = link;
     link->priv = dev;
-    link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
+    link->config_flags |= CONF_ENABLE_IRQ;
 
     dev->netdev_ops = &axnet_netdev_ops;
 
@@ -177,15 +167,6 @@ static int axnet_probe(struct pcmcia_device *link)
     return axnet_config(link);
 } /* axnet_attach */
 
-/*======================================================================
-
-    This deletes a driver "instance".  The device is de-registered
-    with Card Services.  If it has been released, all local data
-    structures are freed.  Otherwise, the structures will be freed
-    when the device is released.
-
-======================================================================*/
-
 static void axnet_detach(struct pcmcia_device *link)
 {
     struct net_device *dev = link->priv;
@@ -231,7 +212,7 @@ static int get_prom(struct pcmcia_device *link)
     };
 
     /* Not much of a test, but the alternatives are messy */
-    if (link->conf.ConfigBase != 0x03c0)
+    if (link->config_base != 0x03c0)
 	return 0;
 
     axnet_reset_8390(dev);
@@ -248,14 +229,6 @@ static int get_prom(struct pcmcia_device *link)
     return 1;
 } /* get_prom */
 
-/*======================================================================
-
-    axnet_config() is scheduled to run after a CARD_INSERTION event
-    is received, to configure the PCMCIA socket, and to make the
-    ethernet device available to the system.
-
-======================================================================*/
-
 static int try_io_port(struct pcmcia_device *link)
 {
     int j, ret;
@@ -286,35 +259,16 @@ static int try_io_port(struct pcmcia_device *link)
     }
 }
 
-static int axnet_configcheck(struct pcmcia_device *p_dev,
-			     cistpl_cftable_entry_t *cfg,
-			     cistpl_cftable_entry_t *dflt,
-			     unsigned int vcc,
-			     void *priv_data)
+static int axnet_configcheck(struct pcmcia_device *p_dev, void *priv_data)
 {
-	int i;
-	cistpl_io_t *io = &cfg->io;
+	if (p_dev->config_index == 0)
+		return -EINVAL;
 
-	if (cfg->index == 0 || cfg->io.nwin == 0)
+	p_dev->config_index = 0x05;
+	if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32)
 		return -ENODEV;
 
-	p_dev->conf.ConfigIndex = 0x05;
-	/* For multifunction cards, by convention, we configure the
-	   network function with window 0, and serial with window 1 */
-	if (io->nwin > 1) {
-		i = (io->win[1].len > io->win[0].len);
-		p_dev->resource[1]->start = io->win[1-i].base;
-		p_dev->resource[1]->end = io->win[1-i].len;
-	} else {
-		i = p_dev->resource[1]->end = 0;
-	}
-	p_dev->resource[0]->start = io->win[i].base;
-	p_dev->resource[0]->end = io->win[i].len;
-	p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
-	if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32)
-		return try_io_port(p_dev);
-
-	return -ENODEV;
+	return try_io_port(p_dev);
 }
 
 static int axnet_config(struct pcmcia_device *link)
@@ -326,20 +280,19 @@ static int axnet_config(struct pcmcia_device *link)
     dev_dbg(&link->dev, "axnet_config(0x%p)\n", link);
 
     /* don't trust the CIS on this; Linksys got it wrong */
-    link->conf.Present = 0x63;
+    link->config_regs = 0x63;
+    link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
     ret = pcmcia_loop_config(link, axnet_configcheck, NULL);
     if (ret != 0)
 	goto failed;
 
     if (!link->irq)
 	    goto failed;
+
+    if (resource_size(link->resource[1]) == 8)
+	link->config_flags |= CONF_ENABLE_SPKR;
     
-    if (resource_size(link->resource[1]) == 8) {
-	link->conf.Attributes |= CONF_ENABLE_SPKR;
-	link->conf.Status = CCSR_AUDIO_ENA;
-    }
-    
-    ret = pcmcia_request_configuration(link, &link->conf);
+    ret = pcmcia_enable_device(link);
     if (ret)
 	    goto failed;
 
@@ -414,14 +367,6 @@ static int axnet_config(struct pcmcia_device *link)
     return -ENODEV;
 } /* axnet_config */
 
-/*======================================================================
-
-    After a card is removed, axnet_release() will unregister the net
-    device, and release the PCMCIA configuration.  If the device is
-    still open, this will be postponed until it is closed.
-
-======================================================================*/
-
 static void axnet_release(struct pcmcia_device *link)
 {
 	pcmcia_disable_device(link);
@@ -783,9 +728,7 @@ MODULE_DEVICE_TABLE(pcmcia, axnet_ids);
 
 static struct pcmcia_driver axnet_cs_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "axnet_cs",
-	},
+	.name		= "axnet_cs",
 	.probe		= axnet_probe,
 	.remove		= axnet_detach,
 	.id_table       = axnet_ids,

drivers/net/pcmcia/com20020_cs.c

@@ -43,7 +43,6 @@
 #include <linux/arcdevice.h>
 #include <linux/com20020.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 
@@ -123,14 +122,6 @@ typedef struct com20020_dev_t {
     struct net_device       *dev;
 } com20020_dev_t;
 
-/*======================================================================
-
-    com20020_attach() creates an "instance" of the driver, allocating
-    local data structures for one device.  The device is registered
-    with Card Services.
-
-======================================================================*/
-
 static int com20020_probe(struct pcmcia_device *p_dev)
 {
     com20020_dev_t *info;
@@ -160,8 +151,7 @@ static int com20020_probe(struct pcmcia_device *p_dev)
 
     p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
     p_dev->resource[0]->end = 16;
-    p_dev->conf.Attributes = CONF_ENABLE_IRQ;
-    p_dev->conf.IntType = INT_MEMORY_AND_IO;
+    p_dev->config_flags |= CONF_ENABLE_IRQ;
 
     info->dev = dev;
     p_dev->priv = info;
@@ -174,15 +164,6 @@ static int com20020_probe(struct pcmcia_device *p_dev)
     return -ENOMEM;
 } /* com20020_attach */
 
-/*======================================================================
-
-    This deletes a driver "instance".  The device is de-registered
-    with Card Services.  If it has been released, all local data
-    structures are freed.  Otherwise, the structures will be freed
-    when the device is released.
-
-======================================================================*/
-
 static void com20020_detach(struct pcmcia_device *link)
 {
     struct com20020_dev_t *info = link->priv;
@@ -221,14 +202,6 @@ static void com20020_detach(struct pcmcia_device *link)
 
 } /* com20020_detach */
 
-/*======================================================================
-
-    com20020_config() is scheduled to run after a CARD_INSERTION event
-    is received, to configure the PCMCIA socket, and to make the
-    device available to the system.
-
-======================================================================*/
-
 static int com20020_config(struct pcmcia_device *link)
 {
     struct arcnet_local *lp;
@@ -282,7 +255,7 @@ static int com20020_config(struct pcmcia_device *link)
 
     dev->irq = link->irq;
 
-    ret = pcmcia_request_configuration(link, &link->conf);
+    ret = pcmcia_enable_device(link);
     if (ret)
 	    goto failed;
 
@@ -316,14 +289,6 @@ static int com20020_config(struct pcmcia_device *link)
     return -ENODEV;
 } /* com20020_config */
 
-/*======================================================================
-
-    After a card is removed, com20020_release() will unregister the net
-    device, and release the PCMCIA configuration.  If the device is
-    still open, this will be postponed until it is closed.
-
-======================================================================*/
-
 static void com20020_release(struct pcmcia_device *link)
 {
 	dev_dbg(&link->dev, "com20020_release\n");
@@ -366,9 +331,7 @@ MODULE_DEVICE_TABLE(pcmcia, com20020_ids);
 
 static struct pcmcia_driver com20020_cs_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "com20020_cs",
-	},
+	.name		= "com20020_cs",
 	.probe		= com20020_probe,
 	.remove		= com20020_detach,
 	.id_table	= com20020_ids,

drivers/net/pcmcia/fmvj18x_cs.c

@@ -49,7 +49,6 @@
 #include <linux/ioport.h>
 #include <linux/crc32.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
 #include <pcmcia/ds.h>
@@ -252,8 +251,7 @@ static int fmvj18x_probe(struct pcmcia_device *link)
     link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 
     /* General socket configuration */
-    link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
+    link->config_flags |= CONF_ENABLE_IRQ;
 
     dev->netdev_ops = &fjn_netdev_ops;
     dev->watchdog_timeo = TX_TIMEOUT;
@@ -313,7 +311,7 @@ static int ungermann_try_io_port(struct pcmcia_device *link)
 	ret = pcmcia_request_io(link);
 	if (ret == 0) {
 	    /* calculate ConfigIndex value */
-	    link->conf.ConfigIndex = 
+	    link->config_index =
 		((link->resource[0]->start & 0x0f0) >> 3) | 0x22;
 	    return ret;
 	}
@@ -321,11 +319,7 @@ static int ungermann_try_io_port(struct pcmcia_device *link)
     return ret;	/* RequestIO failed */
 }
 
-static int fmvj18x_ioprobe(struct pcmcia_device *p_dev,
-			   cistpl_cftable_entry_t *cfg,
-			   cistpl_cftable_entry_t *dflt,
-			   unsigned int vcc,
-			   void *priv_data)
+static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, void *priv_data)
 {
 	return 0; /* strange, but that's what the code did already before... */
 }
@@ -362,28 +356,28 @@ static int fmvj18x_config(struct pcmcia_device *link)
 		link->card_id == PRODID_TDK_NP9610 ||
 		link->card_id == PRODID_TDK_MN3200) {
 		/* MultiFunction Card */
-		link->conf.ConfigBase = 0x800;
-		link->conf.ConfigIndex = 0x47;
+		link->config_base = 0x800;
+		link->config_index = 0x47;
 		link->resource[1]->end = 8;
 	    }
 	    break;
 	case MANFID_NEC:
 	    cardtype = NEC; /* MultiFunction Card */
-	    link->conf.ConfigBase = 0x800;
-	    link->conf.ConfigIndex = 0x47;
+	    link->config_base = 0x800;
+	    link->config_index = 0x47;
 	    link->resource[1]->end = 8;
 	    break;
 	case MANFID_KME:
 	    cardtype = KME; /* MultiFunction Card */
-	    link->conf.ConfigBase = 0x800;
-	    link->conf.ConfigIndex = 0x47;
+	    link->config_base = 0x800;
+	    link->config_index = 0x47;
 	    link->resource[1]->end = 8;
 	    break;
 	case MANFID_CONTEC:
 	    cardtype = CONTEC;
 	    break;
 	case MANFID_FUJITSU:
-	    if (link->conf.ConfigBase == 0x0fe0)
+	    if (link->config_base == 0x0fe0)
 		cardtype = MBH10302;
 	    else if (link->card_id == PRODID_FUJITSU_MBH10302) 
                 /* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302),
@@ -403,10 +397,10 @@ static int fmvj18x_config(struct pcmcia_device *link)
 	case MANFID_FUJITSU:
 	    if (link->card_id == PRODID_FUJITSU_MBH10304) {
 		cardtype = XXX10304;    /* MBH10304 with buggy CIS */
-	        link->conf.ConfigIndex = 0x20;
+		link->config_index = 0x20;
 	    } else {
 		cardtype = MBH10302;    /* NextCom NC5310, etc. */
-		link->conf.ConfigIndex = 1;
+		link->config_index = 1;
 	    }
 	    break;
 	case MANFID_UNGERMANN:
@@ -414,7 +408,7 @@ static int fmvj18x_config(struct pcmcia_device *link)
 	    break;
 	default:
 	    cardtype = MBH10302;
-	    link->conf.ConfigIndex = 1;
+	    link->config_index = 1;
 	}
     }
 
@@ -432,7 +426,7 @@ static int fmvj18x_config(struct pcmcia_device *link)
     ret = pcmcia_request_irq(link, fjn_interrupt);
     if (ret)
 	    goto failed;
-    ret = pcmcia_request_configuration(link, &link->conf);
+    ret = pcmcia_enable_device(link);
     if (ret)
 	    goto failed;
 
@@ -544,20 +538,18 @@ static int fmvj18x_config(struct pcmcia_device *link)
 
 static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
 {
-    win_req_t req;
     u_char __iomem *base;
     int i, j;
 
     /* Allocate a small memory window */
-    req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
-    req.Base = 0; req.Size = 0;
-    req.AccessSpeed = 0;
-    i = pcmcia_request_window(link, &req, &link->win);
+    link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
+    link->resource[2]->start = 0; link->resource[2]->end = 0;
+    i = pcmcia_request_window(link, link->resource[2], 0);
     if (i != 0)
 	return -1;
 
-    base = ioremap(req.Base, req.Size);
-    pcmcia_map_mem_page(link, link->win, 0);
+    base = ioremap(link->resource[2]->start, resource_size(link->resource[2]));
+    pcmcia_map_mem_page(link, link->resource[2], 0);
 
     /*
      *  MBH10304 CISTPL_FUNCE_LAN_NODE_ID format
@@ -582,7 +574,7 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
     }
 
     iounmap(base);
-    j = pcmcia_release_window(link, link->win);
+    j = pcmcia_release_window(link, link->resource[2]);
     return (i != 0x200) ? 0 : -1;
 
 } /* fmvj18x_get_hwinfo */
@@ -590,27 +582,26 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
 
 static int fmvj18x_setup_mfc(struct pcmcia_device *link)
 {
-    win_req_t req;
     int i;
     struct net_device *dev = link->priv;
     unsigned int ioaddr;
     local_info_t *lp = netdev_priv(dev);
 
     /* Allocate a small memory window */
-    req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
-    req.Base = 0; req.Size = 0;
-    req.AccessSpeed = 0;
-    i = pcmcia_request_window(link, &req, &link->win);
+    link->resource[3]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
+    link->resource[3]->start = link->resource[3]->end = 0;
+    i = pcmcia_request_window(link, link->resource[3], 0);
     if (i != 0)
 	return -1;
 
-    lp->base = ioremap(req.Base, req.Size);
+    lp->base = ioremap(link->resource[3]->start,
+		       resource_size(link->resource[3]));
     if (lp->base == NULL) {
 	printk(KERN_NOTICE "fmvj18x_cs: ioremap failed\n");
 	return -1;
     }
 
-    i = pcmcia_map_mem_page(link, link->win, 0);
+    i = pcmcia_map_mem_page(link, link->resource[3], 0);
     if (i != 0) {
 	iounmap(lp->base);
 	lp->base = NULL;
@@ -638,7 +629,6 @@ static void fmvj18x_release(struct pcmcia_device *link)
     struct net_device *dev = link->priv;
     local_info_t *lp = netdev_priv(dev);
     u_char __iomem *tmp;
-    int j;
 
     dev_dbg(&link->dev, "fmvj18x_release\n");
 
@@ -646,7 +636,6 @@ static void fmvj18x_release(struct pcmcia_device *link)
 	tmp = lp->base;
 	lp->base = NULL;    /* set NULL before iounmap */
 	iounmap(tmp);
-	j = pcmcia_release_window(link, link->win);
     }
 
     pcmcia_disable_device(link);
@@ -708,9 +697,7 @@ MODULE_DEVICE_TABLE(pcmcia, fmvj18x_ids);
 
 static struct pcmcia_driver fmvj18x_cs_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "fmvj18x_cs",
-	},
+	.name		= "fmvj18x_cs",
 	.probe		= fmvj18x_probe,
 	.remove		= fmvj18x_detach,
 	.id_table       = fmvj18x_ids,

drivers/net/pcmcia/ibmtr_cs.c

@@ -57,7 +57,6 @@
 #include <linux/trdevice.h>
 #include <linux/ibmtr.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 
@@ -102,9 +101,8 @@ static void ibmtr_detach(struct pcmcia_device *p_dev);
 
 typedef struct ibmtr_dev_t {
 	struct pcmcia_device	*p_dev;
-    struct net_device	*dev;
-    window_handle_t     sram_win_handle;
-    struct tok_info	*ti;
+	struct net_device	*dev;
+	struct tok_info		*ti;
 } ibmtr_dev_t;
 
 static void netdev_get_drvinfo(struct net_device *dev,
@@ -123,14 +121,6 @@ static irqreturn_t ibmtr_interrupt(int irq, void *dev_id) {
 	return tok_interrupt(irq, dev);
 };
 
-/*======================================================================
-
-    ibmtr_attach() creates an "instance" of the driver, allocating
-    local data structures for one device.  The device is registered
-    with Card Services.
-
-======================================================================*/
-
 static int __devinit ibmtr_attach(struct pcmcia_device *link)
 {
     ibmtr_dev_t *info;
@@ -153,9 +143,8 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link)
 
     link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
     link->resource[0]->end = 4;
-    link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
-    link->conf.Present = PRESENT_OPTION;
+    link->config_flags |= CONF_ENABLE_IRQ;
+    link->config_regs = PRESENT_OPTION;
 
     info->dev = dev;
 
@@ -164,15 +153,6 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link)
     return ibmtr_config(link);
 } /* ibmtr_attach */
 
-/*======================================================================
-
-    This deletes a driver "instance".  The device is de-registered
-    with Card Services.  If it has been released, all local data
-    structures are freed.  Otherwise, the structures will be freed
-    when the device is released.
-
-======================================================================*/
-
 static void ibmtr_detach(struct pcmcia_device *link)
 {
     struct ibmtr_dev_t *info = link->priv;
@@ -197,26 +177,17 @@ static void ibmtr_detach(struct pcmcia_device *link)
     kfree(info);
 } /* ibmtr_detach */
 
-/*======================================================================
-
-    ibmtr_config() is scheduled to run after a CARD_INSERTION event
-    is received, to configure the PCMCIA socket, and to make the
-    token-ring device available to the system.
-
-======================================================================*/
-
 static int __devinit ibmtr_config(struct pcmcia_device *link)
 {
     ibmtr_dev_t *info = link->priv;
     struct net_device *dev = info->dev;
     struct tok_info *ti = netdev_priv(dev);
-    win_req_t req;
     int i, ret;
 
     dev_dbg(&link->dev, "ibmtr_config\n");
 
-    link->conf.ConfigIndex = 0x61;
     link->io_lines = 16;
+    link->config_index = 0x61;
 
     /* Determine if this is PRIMARY or ALTERNATE. */
 
@@ -240,39 +211,39 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
     ti->global_int_enable=GLOBAL_INT_ENABLE+((dev->irq==9) ? 2 : dev->irq);
 
     /* Allocate the MMIO memory window */
-    req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
-    req.Attributes |= WIN_USE_WAIT;
-    req.Base = 0; 
-    req.Size = 0x2000;
-    req.AccessSpeed = 250;
-    ret = pcmcia_request_window(link, &req, &link->win);
+    link->resource[2]->flags |= WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
+    link->resource[2]->flags |= WIN_USE_WAIT;
+    link->resource[2]->start = 0;
+    link->resource[2]->end = 0x2000;
+    ret = pcmcia_request_window(link, link->resource[2], 250);
     if (ret)
 	    goto failed;
 
-    ret = pcmcia_map_mem_page(link, link->win, mmiobase);
+    ret = pcmcia_map_mem_page(link, link->resource[2], mmiobase);
     if (ret)
 	    goto failed;
-    ti->mmio = ioremap(req.Base, req.Size);
+    ti->mmio = ioremap(link->resource[2]->start,
+		    resource_size(link->resource[2]));
 
     /* Allocate the SRAM memory window */
-    req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
-    req.Attributes |= WIN_USE_WAIT;
-    req.Base = 0;
-    req.Size = sramsize * 1024;
-    req.AccessSpeed = 250;
-    ret = pcmcia_request_window(link, &req, &info->sram_win_handle);
+    link->resource[3]->flags = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
+    link->resource[3]->flags |= WIN_USE_WAIT;
+    link->resource[3]->start = 0;
+    link->resource[3]->end = sramsize * 1024;
+    ret = pcmcia_request_window(link, link->resource[3], 250);
     if (ret)
 	    goto failed;
 
-    ret = pcmcia_map_mem_page(link, info->sram_win_handle, srambase);
+    ret = pcmcia_map_mem_page(link, link->resource[3], srambase);
     if (ret)
 	    goto failed;
 
     ti->sram_base = srambase >> 12;
-    ti->sram_virt = ioremap(req.Base, req.Size);
-    ti->sram_phys = req.Base;
+    ti->sram_virt = ioremap(link->resource[3]->start,
+		    resource_size(link->resource[3]));
+    ti->sram_phys = link->resource[3]->start;
 
-    ret = pcmcia_request_configuration(link, &link->conf);
+    ret = pcmcia_enable_device(link);
     if (ret)
 	    goto failed;
 
@@ -301,14 +272,6 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
     return -ENODEV;
 } /* ibmtr_config */
 
-/*======================================================================
-
-    After a card is removed, ibmtr_release() will unregister the net
-    device, and release the PCMCIA configuration.  If the device is
-    still open, this will be postponed until it is closed.
-
-======================================================================*/
-
 static void ibmtr_release(struct pcmcia_device *link)
 {
 	ibmtr_dev_t *info = link->priv;
@@ -316,7 +279,7 @@ static void ibmtr_release(struct pcmcia_device *link)
 
 	dev_dbg(&link->dev, "ibmtr_release\n");
 
-	if (link->win) {
+	if (link->resource[2]->end) {
 		struct tok_info *ti = netdev_priv(dev);
 		iounmap(ti->mmio);
 	}
@@ -398,9 +361,7 @@ MODULE_DEVICE_TABLE(pcmcia, ibmtr_ids);
 
 static struct pcmcia_driver ibmtr_cs_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "ibmtr_cs",
-	},
+	.name		= "ibmtr_cs",
 	.probe		= ibmtr_attach,
 	.remove		= ibmtr_detach,
 	.id_table       = ibmtr_ids,

drivers/net/pcmcia/nmclan_cs.c

@@ -146,7 +146,6 @@ Include Files
 #include <linux/ioport.h>
 #include <linux/bitops.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
@@ -435,13 +434,6 @@ static const struct net_device_ops mace_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 };
 
-/* ----------------------------------------------------------------------------
-nmclan_attach
-	Creates an "instance" of the driver, allocating local data
-	structures for one device.  The device is registered with Card
-	Services.
----------------------------------------------------------------------------- */
-
 static int nmclan_probe(struct pcmcia_device *link)
 {
     mace_private *lp;
@@ -460,10 +452,9 @@ static int nmclan_probe(struct pcmcia_device *link)
     spin_lock_init(&lp->bank_lock);
     link->resource[0]->end = 32;
     link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
-    link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
-    link->conf.ConfigIndex = 1;
-    link->conf.Present = PRESENT_OPTION;
+    link->config_flags |= CONF_ENABLE_IRQ;
+    link->config_index = 1;
+    link->config_regs = PRESENT_OPTION;
 
     lp->tx_free_frames=AM2150_MAX_TX_FRAMES;
 
@@ -474,14 +465,6 @@ static int nmclan_probe(struct pcmcia_device *link)
     return nmclan_config(link);
 } /* nmclan_attach */
 
-/* ----------------------------------------------------------------------------
-nmclan_detach
-	This deletes a driver "instance".  The device is de-registered
-	with Card Services.  If it has been released, all local data
-	structures are freed.  Otherwise, the structures will be freed
-	when the device is released.
----------------------------------------------------------------------------- */
-
 static void nmclan_detach(struct pcmcia_device *link)
 {
     struct net_device *dev = link->priv;
@@ -625,13 +608,6 @@ static int mace_init(mace_private *lp, unsigned int ioaddr, char *enet_addr)
   return 0;
 } /* mace_init */
 
-/* ----------------------------------------------------------------------------
-nmclan_config
-	This routine is scheduled to run after a CARD_INSERTION event
-	is received, to configure the PCMCIA socket, and to make the
-	ethernet device available to the system.
----------------------------------------------------------------------------- */
-
 static int nmclan_config(struct pcmcia_device *link)
 {
   struct net_device *dev = link->priv;
@@ -650,7 +626,7 @@ static int nmclan_config(struct pcmcia_device *link)
   ret = pcmcia_request_exclusive_irq(link, mace_interrupt);
   if (ret)
 	  goto failed;
-  ret = pcmcia_request_configuration(link, &link->conf);
+  ret = pcmcia_enable_device(link);
   if (ret)
 	  goto failed;
 
@@ -712,12 +688,6 @@ static int nmclan_config(struct pcmcia_device *link)
 	return -ENODEV;
 } /* nmclan_config */
 
-/* ----------------------------------------------------------------------------
-nmclan_release
-	After a card is removed, nmclan_release() will unregister the
-	net device, and release the PCMCIA configuration.  If the device
-	is still open, this will be postponed until it is closed.
----------------------------------------------------------------------------- */
 static void nmclan_release(struct pcmcia_device *link)
 {
 	dev_dbg(&link->dev, "nmclan_release\n");
@@ -1535,9 +1505,7 @@ MODULE_DEVICE_TABLE(pcmcia, nmclan_ids);
 
 static struct pcmcia_driver nmclan_cs_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "nmclan_cs",
-	},
+	.name		= "nmclan_cs",
 	.probe		= nmclan_probe,
 	.remove		= nmclan_detach,
 	.id_table       = nmclan_ids,

drivers/net/pcmcia/smc91c92_cs.c

@@ -44,7 +44,6 @@
 #include <linux/jiffies.h>
 #include <linux/firmware.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ciscode.h>
@@ -300,14 +299,6 @@ static const struct net_device_ops smc_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 };
 
-/*======================================================================
-
-  smc91c92_attach() creates an "instance" of the driver, allocating
-  local data structures for one device.  The device is registered
-  with Card Services.
-
-======================================================================*/
-
 static int smc91c92_probe(struct pcmcia_device *link)
 {
     struct smc_private *smc;
@@ -324,10 +315,6 @@ static int smc91c92_probe(struct pcmcia_device *link)
     link->priv = dev;
 
     spin_lock_init(&smc->lock);
-    link->resource[0]->end = 16;
-    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
-    link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
 
     /* The SMC91c92-specific entries in the device structure. */
     dev->netdev_ops = &smc_netdev_ops;
@@ -343,15 +330,6 @@ static int smc91c92_probe(struct pcmcia_device *link)
     return smc91c92_config(link);
 } /* smc91c92_attach */
 
-/*======================================================================
-
-    This deletes a driver "instance".  The device is de-registered
-    with Card Services.  If it has been released, all local data
-    structures are freed.  Otherwise, the structures will be freed
-    when the device is released.
-
-======================================================================*/
-
 static void smc91c92_detach(struct pcmcia_device *link)
 {
     struct net_device *dev = link->priv;
@@ -412,26 +390,28 @@ static int mhz_3288_power(struct pcmcia_device *link)
     mdelay(200);
 
     /* Now read and write the COR... */
-    tmp = readb(smc->base + link->conf.ConfigBase + CISREG_COR);
+    tmp = readb(smc->base + link->config_base + CISREG_COR);
     udelay(5);
-    writeb(tmp, smc->base + link->conf.ConfigBase + CISREG_COR);
+    writeb(tmp, smc->base + link->config_base + CISREG_COR);
 
     return 0;
 }
 
-static int mhz_mfc_config_check(struct pcmcia_device *p_dev,
-				cistpl_cftable_entry_t *cf,
-				cistpl_cftable_entry_t *dflt,
-				unsigned int vcc,
-				void *priv_data)
+static int mhz_mfc_config_check(struct pcmcia_device *p_dev, void *priv_data)
 {
 	int k;
-	p_dev->resource[1]->start = cf->io.win[0].base;
+	p_dev->io_lines = 16;
+	p_dev->resource[1]->start = p_dev->resource[0]->start;
+	p_dev->resource[1]->end = 8;
+	p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+	p_dev->resource[0]->end = 16;
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 	for (k = 0; k < 0x400; k += 0x10) {
 		if (k & 0x80)
 			continue;
 		p_dev->resource[0]->start = k ^ 0x300;
-		p_dev->io_lines = 16;
 		if (!pcmcia_request_io(p_dev))
 			return 0;
 	}
@@ -442,14 +422,11 @@ static int mhz_mfc_config(struct pcmcia_device *link)
 {
     struct net_device *dev = link->priv;
     struct smc_private *smc = netdev_priv(dev);
-    win_req_t req;
     unsigned int offset;
     int i;
 
-    link->conf.Attributes |= CONF_ENABLE_SPKR;
-    link->conf.Status = CCSR_AUDIO_ENA;
-    link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
-    link->resource[1]->end = 8;
+    link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ |
+	    CONF_AUTO_SET_IO;
 
     /* The Megahertz combo cards have modem-like CIS entries, so
        we have to explicitly try a bunch of port combinations. */
@@ -459,16 +436,16 @@ static int mhz_mfc_config(struct pcmcia_device *link)
     dev->base_addr = link->resource[0]->start;
 
     /* Allocate a memory window, for accessing the ISR */
-    req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
-    req.Base = req.Size = 0;
-    req.AccessSpeed = 0;
-    i = pcmcia_request_window(link, &req, &link->win);
+    link->resource[2]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
+    link->resource[2]->start = link->resource[2]->end = 0;
+    i = pcmcia_request_window(link, link->resource[2], 0);
     if (i != 0)
 	    return -ENODEV;
 
-    smc->base = ioremap(req.Base, req.Size);
-    offset = (smc->manfid == MANFID_MOTOROLA) ? link->conf.ConfigBase : 0;
-    i = pcmcia_map_mem_page(link, link->win, offset);
+    smc->base = ioremap(link->resource[2]->start,
+		    resource_size(link->resource[2]));
+    offset = (smc->manfid == MANFID_MOTOROLA) ? link->config_base : 0;
+    i = pcmcia_map_mem_page(link, link->resource[2], offset);
     if ((i == 0) &&
 	(smc->manfid == MANFID_MEGAHERTZ) &&
 	(smc->cardid == PRODID_MEGAHERTZ_EM3288))
@@ -591,14 +568,12 @@ static int mot_setup(struct pcmcia_device *link)
 
 /*====================================================================*/
 
-static int smc_configcheck(struct pcmcia_device *p_dev,
-			   cistpl_cftable_entry_t *cf,
-			   cistpl_cftable_entry_t *dflt,
-			   unsigned int vcc,
-			   void *priv_data)
+static int smc_configcheck(struct pcmcia_device *p_dev, void *priv_data)
 {
-	p_dev->resource[0]->start = cf->io.win[0].base;
-	p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
+	p_dev->resource[0]->end = 16;
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+
 	return pcmcia_request_io(p_dev);
 }
 
@@ -607,7 +582,8 @@ static int smc_config(struct pcmcia_device *link)
     struct net_device *dev = link->priv;
     int i;
 
-    link->resource[0]->end = 16;
+    link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
+
     i = pcmcia_loop_config(link, smc_configcheck, NULL);
     if (!i)
 	    dev->base_addr = link->resource[0]->start;
@@ -640,15 +616,14 @@ static int osi_config(struct pcmcia_device *link)
     static const unsigned int com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
     int i, j;
 
-    link->conf.Attributes |= CONF_ENABLE_SPKR;
-    link->conf.Status = CCSR_AUDIO_ENA;
+    link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ;
     link->resource[0]->end = 64;
     link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
     link->resource[1]->end = 8;
 
     /* Enable Hard Decode, LAN, Modem */
-    link->conf.ConfigIndex = 0x23;
     link->io_lines = 16;
+    link->config_index = 0x23;
 
     for (i = j = 0; j < 4; j++) {
 	link->resource[1]->start = com[j];
@@ -658,7 +633,7 @@ static int osi_config(struct pcmcia_device *link)
     }
     if (i != 0) {
 	/* Fallback: turn off hard decode */
-	link->conf.ConfigIndex = 0x03;
+	link->config_index = 0x03;
 	link->resource[1]->end = 0;
 	i = pcmcia_request_io(link);
     }
@@ -817,27 +792,16 @@ static int check_sig(struct pcmcia_device *link)
     }
 
     if (width) {
-	    modconf_t mod = {
-		    .Attributes = CONF_IO_CHANGE_WIDTH,
-	    };
 	    printk(KERN_INFO "smc91c92_cs: using 8-bit IO window.\n");
 
 	    smc91c92_suspend(link);
-	    pcmcia_modify_configuration(link, &mod);
+	    pcmcia_fixup_iowidth(link);
 	    smc91c92_resume(link);
 	    return check_sig(link);
     }
     return -ENODEV;
 }
 
-/*======================================================================
-
-    smc91c92_config() is scheduled to run after a CARD_INSERTION event
-    is received, to configure the PCMCIA socket, and to make the
-    ethernet device available to the system.
-
-======================================================================*/
-
 static int smc91c92_config(struct pcmcia_device *link)
 {
     struct net_device *dev = link->priv;
@@ -869,7 +833,7 @@ static int smc91c92_config(struct pcmcia_device *link)
     i = pcmcia_request_irq(link, smc_interrupt);
     if (i)
 	    goto config_failed;
-    i = pcmcia_request_configuration(link, &link->conf);
+    i = pcmcia_enable_device(link);
     if (i)
 	    goto config_failed;
 
@@ -988,18 +952,10 @@ static int smc91c92_config(struct pcmcia_device *link)
     return -ENODEV;
 } /* smc91c92_config */
 
-/*======================================================================
-
-    After a card is removed, smc91c92_release() will unregister the net
-    device, and release the PCMCIA configuration.  If the device is
-    still open, this will be postponed until it is closed.
-
-======================================================================*/
-
 static void smc91c92_release(struct pcmcia_device *link)
 {
 	dev_dbg(&link->dev, "smc91c92_release\n");
-	if (link->win) {
+	if (link->resource[2]->end) {
 		struct net_device *dev = link->priv;
 		struct smc_private *smc = netdev_priv(dev);
 		iounmap(smc->base);
@@ -2101,9 +2057,7 @@ MODULE_DEVICE_TABLE(pcmcia, smc91c92_ids);
 
 static struct pcmcia_driver smc91c92_cs_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "smc91c92_cs",
-	},
+	.name		= "smc91c92_cs",
 	.probe		= smc91c92_probe,
 	.remove		= smc91c92_detach,
 	.id_table       = smc91c92_ids,

drivers/net/pcmcia/xirc2ps_cs.c

@@ -82,7 +82,6 @@
 #include <linux/bitops.h>
 #include <linux/mii.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ciscode.h>
@@ -267,33 +266,11 @@ static unsigned mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg);
 static void mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg,
 		   unsigned data, int len);
 
-/*
- * The event() function is this driver's Card Services event handler.
- * It will be called by Card Services when an appropriate card status
- * event is received.  The config() and release() entry points are
- * used to configure or release a socket, in response to card insertion
- * and ejection events.  They are invoked from the event handler.
- */
-
 static int has_ce2_string(struct pcmcia_device * link);
 static int xirc2ps_config(struct pcmcia_device * link);
 static void xirc2ps_release(struct pcmcia_device * link);
-
-/****************
- * The attach() and detach() entry points are used to create and destroy
- * "instances" of the driver, where each instance represents everything
- * needed to manage one actual PCMCIA card.
- */
-
 static void xirc2ps_detach(struct pcmcia_device *p_dev);
 
-/****************
- * You'll also need to prototype all the functions that will actually
- * be used to talk to your device.  See 'pcmem_cs' for a good example
- * of a fully self-sufficient driver; the other drivers rely more or
- * less on other parts of the kernel.
- */
-
 static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id);
 
 typedef struct local_info_t {
@@ -501,16 +478,6 @@ static const struct net_device_ops netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 };
 
-/****************
- * xirc2ps_attach() creates an "instance" of the driver, allocating
- * local data structures for one device.  The device is registered
- * with Card Services.
- *
- * The dev_link structure is initialized, but we don't actually
- * configure the card at this point -- we wait until we receive a
- * card insertion event.
- */
-
 static int
 xirc2ps_probe(struct pcmcia_device *link)
 {
@@ -529,9 +496,7 @@ xirc2ps_probe(struct pcmcia_device *link)
     link->priv = dev;
 
     /* General socket configuration */
-    link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
-    link->conf.ConfigIndex = 1;
+    link->config_index = 1;
 
     /* Fill in card specific entries */
     dev->netdev_ops = &netdev_ops;
@@ -542,13 +507,6 @@ xirc2ps_probe(struct pcmcia_device *link)
     return xirc2ps_config(link);
 } /* xirc2ps_attach */
 
-/****************
- *  This deletes a driver "instance".  The device is de-registered
- *  with Card Services.  If it has been released, all local data
- *  structures are freed.  Otherwise, the structures will be freed
- *  when the device is released.
- */
-
 static void
 xirc2ps_detach(struct pcmcia_device *link)
 {
@@ -667,44 +625,53 @@ has_ce2_string(struct pcmcia_device * p_dev)
 }
 
 static int
-xirc2ps_config_modem(struct pcmcia_device *p_dev,
-		     cistpl_cftable_entry_t *cf,
-		     cistpl_cftable_entry_t *dflt,
-		     unsigned int vcc,
-		     void *priv_data)
+xirc2ps_config_modem(struct pcmcia_device *p_dev, void *priv_data)
 {
 	unsigned int ioaddr;
 
-	if (cf->io.nwin > 0  &&  (cf->io.win[0].base & 0xf) == 8) {
-		for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
-			p_dev->resource[1]->start = cf->io.win[0].base;
-			p_dev->resource[0]->start = ioaddr;
-			if (!pcmcia_request_io(p_dev))
-				return 0;
-		}
+	if ((p_dev->resource[0]->start & 0xf) == 8)
+		return -ENODEV;
+
+	p_dev->resource[0]->end = 16;
+	p_dev->resource[1]->end = 8;
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
+	p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+	p_dev->io_lines = 10;
+
+	p_dev->resource[1]->start = p_dev->resource[0]->start;
+	for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
+		p_dev->resource[0]->start = ioaddr;
+		if (!pcmcia_request_io(p_dev))
+			return 0;
 	}
 	return -ENODEV;
 }
 
 static int
-xirc2ps_config_check(struct pcmcia_device *p_dev,
-		     cistpl_cftable_entry_t *cf,
-		     cistpl_cftable_entry_t *dflt,
-		     unsigned int vcc,
-		     void *priv_data)
+xirc2ps_config_check(struct pcmcia_device *p_dev, void *priv_data)
 {
 	int *pass = priv_data;
+	resource_size_t tmp = p_dev->resource[1]->start;
 
-	if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
-		p_dev->resource[1]->start = cf->io.win[0].base;
-		p_dev->resource[0]->start = p_dev->resource[1]->start
-			+ (*pass ? (cf->index & 0x20 ? -24:8)
-			   : (cf->index & 0x20 ?   8:-24));
-		if (!pcmcia_request_io(p_dev))
-			return 0;
-	}
-	return -ENODEV;
+	tmp += (*pass ? (p_dev->config_index & 0x20 ? -24 : 8)
+		: (p_dev->config_index & 0x20 ?   8 : -24));
+
+	if ((p_dev->resource[0]->start & 0xf) == 8)
+		return -ENODEV;
+
+	p_dev->resource[0]->end = 18;
+	p_dev->resource[1]->end = 8;
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
+	p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+	p_dev->io_lines = 10;
 
+	p_dev->resource[1]->start = p_dev->resource[0]->start;
+	p_dev->resource[0]->start = tmp;
+	return pcmcia_request_io(p_dev);
 }
 
 
@@ -727,11 +694,6 @@ static int pcmcia_get_mac_ce(struct pcmcia_device *p_dev,
 };
 
 
-/****************
- * xirc2ps_config() is scheduled to run after a CARD_INSERTION event
- * is received, to configure the PCMCIA socket, and to make the
- * ethernet device available to the system.
- */
 static int
 xirc2ps_config(struct pcmcia_device * link)
 {
@@ -807,32 +769,24 @@ xirc2ps_config(struct pcmcia_device * link)
 	goto failure;
     }
 
-    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
-    link->io_lines = 10;
     if (local->modem) {
 	int pass;
+	link->config_flags |= CONF_AUTO_SET_IO;
 
-	if (do_sound) {
-	    link->conf.Attributes |= CONF_ENABLE_SPKR;
-	    link->conf.Status |= CCSR_AUDIO_ENA;
-	}
-	link->resource[1]->end = 8;
-	link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
 	if (local->dingo) {
 	    /* Take the Modem IO port from the CIS and scan for a free
 	     * Ethernet port */
-	    link->resource[0]->end = 16; /* no Mako stuff anymore */
 	    if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL))
 		    goto port_found;
 	} else {
-	    link->resource[0]->end = 18;
 	    /* We do 2 passes here: The first one uses the regular mapping and
 	     * the second tries again, thereby considering that the 32 ports are
 	     * mirrored every 32 bytes. Actually we use a mirrored port for
 	     * the Mako if (on the first pass) the COR bit 5 is set.
 	     */
 	    for (pass=0; pass < 2; pass++)
-		    if (!pcmcia_loop_config(link, xirc2ps_config_check, &pass))
+		    if (!pcmcia_loop_config(link, xirc2ps_config_check,
+						    &pass))
 			    goto port_found;
 	    /* if special option:
 	     * try to configure as Ethernet only.
@@ -840,7 +794,9 @@ xirc2ps_config(struct pcmcia_device * link)
 	}
 	printk(KNOT_XIRC "no ports available\n");
     } else {
+	link->io_lines = 10;
 	link->resource[0]->end = 16;
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
 	for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
 	    link->resource[0]->start = ioaddr;
 	    if (!(err = pcmcia_request_io(link)))
@@ -861,16 +817,14 @@ xirc2ps_config(struct pcmcia_device * link)
     if ((err=pcmcia_request_irq(link, xirc2ps_interrupt)))
 	goto config_error;
 
-    /****************
-     * This actually configures the PCMCIA socket -- setting up
-     * the I/O windows and the interrupt mapping.
-     */
-    if ((err=pcmcia_request_configuration(link, &link->conf)))
+    link->config_flags |= CONF_ENABLE_IRQ;
+    if (do_sound)
+	    link->config_flags |= CONF_ENABLE_SPKR;
+
+    if ((err = pcmcia_enable_device(link)))
 	goto config_error;
 
     if (local->dingo) {
-	win_req_t req;
-
 	/* Reset the modem's BAR to the correct value
 	 * This is necessary because in the RequestConfiguration call,
 	 * the base address of the ethernet port (BasePort1) is written
@@ -890,14 +844,14 @@ xirc2ps_config(struct pcmcia_device * link)
 	 * is at 0x0800. So we allocate a window into the attribute
 	 * memory and write direct to the CIS registers
 	 */
-	req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
-	req.Base = req.Size = 0;
-	req.AccessSpeed = 0;
-	if ((err = pcmcia_request_window(link, &req, &link->win)))
+	link->resource[2]->flags = WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM |
+					WIN_ENABLE;
+	link->resource[2]->start = link->resource[2]->end = 0;
+	if ((err = pcmcia_request_window(link, link->resource[2], 0)))
 	    goto config_error;
 
-	local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800;
-	if ((err = pcmcia_map_mem_page(link, link->win, 0)))
+	local->dingo_ccr = ioremap(link->resource[2]->start, 0x1000) + 0x0800;
+	if ((err = pcmcia_map_mem_page(link, link->resource[2], 0)))
 	    goto config_error;
 
 	/* Setup the CCRs; there are no infos in the CIS about the Ethernet
@@ -978,17 +932,12 @@ xirc2ps_config(struct pcmcia_device * link)
     return -ENODEV;
 } /* xirc2ps_config */
 
-/****************
- * After a card is removed, xirc2ps_release() will unregister the net
- * device, and release the PCMCIA configuration.  If the device is
- * still open, this will be postponed until it is closed.
- */
 static void
 xirc2ps_release(struct pcmcia_device *link)
 {
 	dev_dbg(&link->dev, "release\n");
 
-	if (link->win) {
+	if (link->resource[2]->end) {
 		struct net_device *dev = link->priv;
 		local_info_t *local = netdev_priv(dev);
 		if (local->dingo)
@@ -1830,9 +1779,7 @@ MODULE_DEVICE_TABLE(pcmcia, xirc2ps_ids);
 
 static struct pcmcia_driver xirc2ps_cs_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "xirc2ps_cs",
-	},
+	.name		= "xirc2ps_cs",
 	.probe		= xirc2ps_probe,
 	.remove		= xirc2ps_detach,
 	.id_table       = xirc2ps_ids,

drivers/net/wireless/airo_cs.c

@@ -32,7 +32,6 @@
 #include <linux/timer.h>
 #include <linux/netdevice.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -54,58 +53,21 @@ MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340 PCMCIA cards");
 
 /*====================================================================*/
 
-/*
-   The event() function is this driver's Card Services event handler.
-   It will be called by Card Services when an appropriate card status
-   event is received.  The config() and release() entry points are
-   used to configure or release a socket, in response to card
-   insertion and ejection events.  They are invoked from the airo_cs
-   event handler.
-*/
-
 static int airo_config(struct pcmcia_device *link);
 static void airo_release(struct pcmcia_device *link);
 
-/*
-   The attach() and detach() entry points are used to create and destroy
-   "instances" of the driver, where each instance represents everything
-   needed to manage one actual PCMCIA card.
-*/
-
 static void airo_detach(struct pcmcia_device *p_dev);
 
 typedef struct local_info_t {
 	struct net_device *eth_dev;
 } local_info_t;
 
-/*======================================================================
-
-  airo_attach() creates an "instance" of the driver, allocating
-  local data structures for one device.  The device is registered
-  with Card Services.
-
-  The dev_link structure is initialized, but we don't actually
-  configure the card at this point -- we wait until we receive a
-  card insertion event.
-
-  ======================================================================*/
-
 static int airo_probe(struct pcmcia_device *p_dev)
 {
 	local_info_t *local;
 
 	dev_dbg(&p_dev->dev, "airo_attach()\n");
 
-	/*
-	  General socket configuration defaults can go here.  In this
-	  client, we assume very little, and rely on the CIS for almost
-	  everything.  In most clients, many details (i.e., number, sizes,
-	  and attributes of IO windows) are fixed by the nature of the
-	  device, and can be hard-wired here.
-	*/
-	p_dev->conf.Attributes = 0;
-	p_dev->conf.IntType = INT_MEMORY_AND_IO;
-
 	/* Allocate space for private device-specific data */
 	local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
 	if (!local) {
@@ -117,15 +79,6 @@ static int airo_probe(struct pcmcia_device *p_dev)
 	return airo_config(p_dev);
 } /* airo_attach */
 
-/*======================================================================
-
-  This deletes a driver "instance".  The device is de-registered
-  with Card Services.  If it has been released, all local data
-  structures are freed.  Otherwise, the structures will be freed
-  when the device is released.
-
-  ======================================================================*/
-
 static void airo_detach(struct pcmcia_device *link)
 {
 	dev_dbg(&link->dev, "airo_detach\n");
@@ -140,60 +93,12 @@ static void airo_detach(struct pcmcia_device *link)
 	kfree(link->priv);
 } /* airo_detach */
 
-/*======================================================================
-
-  airo_config() is scheduled to run after a CARD_INSERTION event
-  is received, to configure the PCMCIA socket, and to make the
-  device available to the system.
-
-  ======================================================================*/
-
-static int airo_cs_config_check(struct pcmcia_device *p_dev,
-				cistpl_cftable_entry_t *cfg,
-				cistpl_cftable_entry_t *dflt,
-				unsigned int vcc,
-				void *priv_data)
+static int airo_cs_config_check(struct pcmcia_device *p_dev, void *priv_data)
 {
-	if (cfg->index == 0)
-		return -ENODEV;
-
-	/* Does this card need audio output? */
-	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
-		p_dev->conf.Status = CCSR_AUDIO_ENA;
-	}
-
-	/* Use power settings for Vcc and Vpp if present */
-	/*  Note that the CIS values need to be rescaled */
-	if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
-	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
-
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
-
-	/* IO window settings */
-	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
-	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
-		p_dev->resource[0]->flags |=
-					pcmcia_io_cfg_data_width(io->flags);
-		p_dev->resource[0]->start = io->win[0].base;
-		p_dev->resource[0]->end = io->win[0].len;
-		if (io->nwin > 1) {
-			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
-			p_dev->resource[1]->start = io->win[1].base;
-			p_dev->resource[1]->end = io->win[1].len;
-		}
-	}
+	if (p_dev->config_index == 0)
+		return -EINVAL;
 
-	/* This reserves IO space but doesn't actually enable it */
-	if (pcmcia_request_io(p_dev) != 0)
-		return -ENODEV;
-
-	/* If we got this far, we're cool! */
-	return 0;
+	return pcmcia_request_io(p_dev);
 }
 
 
@@ -206,20 +111,9 @@ static int airo_config(struct pcmcia_device *link)
 
 	dev_dbg(&link->dev, "airo_config\n");
 
-	/*
-	 * In this loop, we scan the CIS for configuration table
-	 * entries, each of which describes a valid card
-	 * configuration, including voltage, IO window, memory window,
-	 * and interrupt settings.
-	 *
-	 * We make no assumptions about the card to be configured: we
-	 * use just the information available in the CIS.  In an ideal
-	 * world, this would work for any PCMCIA card, but it requires
-	 * a complete and accurate CIS.  In practice, a driver usually
-	 * "knows" most of these things without consulting the CIS,
-	 * and most client drivers will only use the CIS to fill in
-	 * implementation-defined details.
-	 */
+	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
+		CONF_AUTO_AUDIO | CONF_AUTO_SET_IO;
+
 	ret = pcmcia_loop_config(link, airo_cs_config_check, NULL);
 	if (ret)
 		goto failed;
@@ -227,12 +121,7 @@ static int airo_config(struct pcmcia_device *link)
 	if (!link->irq)
 		goto failed;
 
-	/*
-	  This actually configures the PCMCIA socket -- setting up
-	  the I/O windows and the interrupt mapping, and putting the
-	  card and host interface into "Memory and IO" mode.
-	*/
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 	((local_info_t *)link->priv)->eth_dev =
@@ -241,17 +130,6 @@ static int airo_config(struct pcmcia_device *link)
 	if (!((local_info_t *)link->priv)->eth_dev)
 		goto failed;
 
-	/* Finally, report what we've done */
-	dev_info(&link->dev, "index 0x%02x: ",
-	       link->conf.ConfigIndex);
-	if (link->conf.Vpp)
-		printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
-	printk(", irq %d", link->irq);
-	if (link->resource[0])
-		printk(" & %pR", link->resource[0]);
-	if (link->resource[1])
-		printk(" & %pR", link->resource[1]);
-	printk("\n");
 	return 0;
 
  failed:
@@ -259,14 +137,6 @@ static int airo_config(struct pcmcia_device *link)
 	return -ENODEV;
 } /* airo_config */
 
-/*======================================================================
-
-  After a card is removed, airo_release() will unregister the
-  device, and release the PCMCIA configuration.  If the device is
-  still open, this will be postponed until it is closed.
-
-  ======================================================================*/
-
 static void airo_release(struct pcmcia_device *link)
 {
 	dev_dbg(&link->dev, "airo_release\n");
@@ -305,9 +175,7 @@ MODULE_DEVICE_TABLE(pcmcia, airo_ids);
 
 static struct pcmcia_driver airo_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "airo_cs",
-	},
+	.name		= "airo_cs",
 	.probe		= airo_probe,
 	.remove		= airo_detach,
 	.id_table       = airo_ids,
@@ -315,12 +183,12 @@ static struct pcmcia_driver airo_driver = {
 	.resume		= airo_resume,
 };
 
-static int airo_cs_init(void)
+static int __init airo_cs_init(void)
 {
 	return pcmcia_register_driver(&airo_driver);
 }
 
-static void airo_cs_cleanup(void)
+static void __exit airo_cs_cleanup(void)
 {
 	pcmcia_unregister_driver(&airo_driver);
 }

drivers/net/wireless/atmel_cs.c

@@ -42,7 +42,6 @@
 #include <linux/moduleparam.h>
 #include <linux/device.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -64,58 +63,21 @@ MODULE_SUPPORTED_DEVICE("Atmel at76c50x PCMCIA cards");
 
 /*====================================================================*/
 
-/*
-   The event() function is this driver's Card Services event handler.
-   It will be called by Card Services when an appropriate card status
-   event is received.  The config() and release() entry points are
-   used to configure or release a socket, in response to card
-   insertion and ejection events.  They are invoked from the atmel_cs
-   event handler.
-*/
-
 static int atmel_config(struct pcmcia_device *link);
 static void atmel_release(struct pcmcia_device *link);
 
-/*
-   The attach() and detach() entry points are used to create and destroy
-   "instances" of the driver, where each instance represents everything
-   needed to manage one actual PCMCIA card.
-*/
-
 static void atmel_detach(struct pcmcia_device *p_dev);
 
 typedef struct local_info_t {
 	struct net_device *eth_dev;
 } local_info_t;
 
-/*======================================================================
-
-  atmel_attach() creates an "instance" of the driver, allocating
-  local data structures for one device.  The device is registered
-  with Card Services.
-
-  The dev_link structure is initialized, but we don't actually
-  configure the card at this point -- we wait until we receive a
-  card insertion event.
-
-  ======================================================================*/
-
 static int atmel_probe(struct pcmcia_device *p_dev)
 {
 	local_info_t *local;
 
 	dev_dbg(&p_dev->dev, "atmel_attach()\n");
 
-	/*
-	  General socket configuration defaults can go here.  In this
-	  client, we assume very little, and rely on the CIS for almost
-	  everything.  In most clients, many details (i.e., number, sizes,
-	  and attributes of IO windows) are fixed by the nature of the
-	  device, and can be hard-wired here.
-	*/
-	p_dev->conf.Attributes = 0;
-	p_dev->conf.IntType = INT_MEMORY_AND_IO;
-
 	/* Allocate space for private device-specific data */
 	local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
 	if (!local) {
@@ -127,15 +89,6 @@ static int atmel_probe(struct pcmcia_device *p_dev)
 	return atmel_config(p_dev);
 } /* atmel_attach */
 
-/*======================================================================
-
-  This deletes a driver "instance".  The device is de-registered
-  with Card Services.  If it has been released, all local data
-  structures are freed.  Otherwise, the structures will be freed
-  when the device is released.
-
-  ======================================================================*/
-
 static void atmel_detach(struct pcmcia_device *link)
 {
 	dev_dbg(&link->dev, "atmel_detach\n");
@@ -145,14 +98,6 @@ static void atmel_detach(struct pcmcia_device *link)
 	kfree(link->priv);
 }
 
-/*======================================================================
-
-  atmel_config() is scheduled to run after a CARD_INSERTION event
-  is received, to configure the PCMCIA socket, and to make the
-  device available to the system.
-
-  ======================================================================*/
-
 /* Call-back function to interrogate PCMCIA-specific information
    about the current existance of the card */
 static int card_present(void *arg)
@@ -165,47 +110,11 @@ static int card_present(void *arg)
 	return 0;
 }
 
-static int atmel_config_check(struct pcmcia_device *p_dev,
-			      cistpl_cftable_entry_t *cfg,
-			      cistpl_cftable_entry_t *dflt,
-			      unsigned int vcc,
-			      void *priv_data)
+static int atmel_config_check(struct pcmcia_device *p_dev, void *priv_data)
 {
-	if (cfg->index == 0)
-		return -ENODEV;
-
-	/* Does this card need audio output? */
-	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
-		p_dev->conf.Status = CCSR_AUDIO_ENA;
-	}
+	if (p_dev->config_index == 0)
+		return -EINVAL;
 
-	/* Use power settings for Vcc and Vpp if present */
-	/*  Note that the CIS values need to be rescaled */
-	if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
-	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
-
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
-
-	/* IO window settings */
-	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
-	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
-		p_dev->resource[0]->flags |=
-					pcmcia_io_cfg_data_width(io->flags);
-		p_dev->resource[0]->start = io->win[0].base;
-		p_dev->resource[0]->end = io->win[0].len;
-		if (io->nwin > 1) {
-			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
-			p_dev->resource[1]->start = io->win[1].base;
-			p_dev->resource[1]->end = io->win[1].len;
-		}
-	}
-
-	/* This reserves IO space but doesn't actually enable it */
 	return pcmcia_request_io(p_dev);
 }
 
@@ -220,18 +129,9 @@ static int atmel_config(struct pcmcia_device *link)
 
 	dev_dbg(&link->dev, "atmel_config\n");
 
-	/*
-	  In this loop, we scan the CIS for configuration table entries,
-	  each of which describes a valid card configuration, including
-	  voltage, IO window, memory window, and interrupt settings.
-
-	  We make no assumptions about the card to be configured: we use
-	  just the information available in the CIS.  In an ideal world,
-	  this would work for any PCMCIA card, but it requires a complete
-	  and accurate CIS.  In practice, a driver usually "knows" most of
-	  these things without consulting the CIS, and most client drivers
-	  will only use the CIS to fill in implementation-defined details.
-	*/
+	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
+		CONF_AUTO_AUDIO | CONF_AUTO_SET_IO;
+
 	if (pcmcia_loop_config(link, atmel_config_check, NULL))
 		goto failed;
 
@@ -240,12 +140,7 @@ static int atmel_config(struct pcmcia_device *link)
 		goto failed;
 	}
 
-	/*
-	  This actually configures the PCMCIA socket -- setting up
-	  the I/O windows and the interrupt mapping, and putting the
-	  card and host interface into "Memory and IO" mode.
-	*/
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 
@@ -267,14 +162,6 @@ static int atmel_config(struct pcmcia_device *link)
 	return -ENODEV;
 }
 
-/*======================================================================
-
-  After a card is removed, atmel_release() will unregister the
-  device, and release the PCMCIA configuration.  If the device is
-  still open, this will be postponed until it is closed.
-
-  ======================================================================*/
-
 static void atmel_release(struct pcmcia_device *link)
 {
 	struct net_device *dev = ((local_info_t*)link->priv)->eth_dev;
@@ -353,9 +240,7 @@ MODULE_DEVICE_TABLE(pcmcia, atmel_ids);
 
 static struct pcmcia_driver atmel_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "atmel_cs",
-        },
+	.name		= "atmel_cs",
 	.probe          = atmel_probe,
 	.remove		= atmel_detach,
 	.id_table	= atmel_ids,
@@ -363,12 +248,12 @@ static struct pcmcia_driver atmel_driver = {
 	.resume		= atmel_resume,
 };
 
-static int atmel_cs_init(void)
+static int __init atmel_cs_init(void)
 {
         return pcmcia_register_driver(&atmel_driver);
 }
 
-static void atmel_cs_cleanup(void)
+static void __exit atmel_cs_cleanup(void)
 {
         pcmcia_unregister_driver(&atmel_driver);
 }

drivers/net/wireless/b43/pcmcia.c

@@ -26,7 +26,6 @@
 #include <linux/ssb/ssb.h>
 #include <linux/slab.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
 #include <pcmcia/ds.h>
@@ -63,7 +62,6 @@ static int b43_pcmcia_resume(struct pcmcia_device *dev)
 static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 {
 	struct ssb_bus *ssb;
-	win_req_t win;
 	int err = -ENOMEM;
 	int res = 0;
 
@@ -73,30 +71,28 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 
 	err = -ENODEV;
 
-	dev->conf.Attributes = CONF_ENABLE_IRQ;
-	dev->conf.IntType = INT_MEMORY_AND_IO;
+	dev->config_flags |= CONF_ENABLE_IRQ;
 
-	win.Attributes =  WIN_ENABLE | WIN_DATA_WIDTH_16 |
+	dev->resource[2]->flags |=  WIN_ENABLE | WIN_DATA_WIDTH_16 |
 			 WIN_USE_WAIT;
-	win.Base = 0;
-	win.Size = SSB_CORE_SIZE;
-	win.AccessSpeed = 250;
-	res = pcmcia_request_window(dev, &win, &dev->win);
+	dev->resource[2]->start = 0;
+	dev->resource[2]->end = SSB_CORE_SIZE;
+	res = pcmcia_request_window(dev, dev->resource[2], 250);
 	if (res != 0)
 		goto err_kfree_ssb;
 
-	res = pcmcia_map_mem_page(dev, dev->win, 0);
+	res = pcmcia_map_mem_page(dev, dev->resource[2], 0);
 	if (res != 0)
 		goto err_disable;
 
 	if (!dev->irq)
 		goto err_disable;
 
-	res = pcmcia_request_configuration(dev, &dev->conf);
+	res = pcmcia_enable_device(dev);
 	if (res != 0)
 		goto err_disable;
 
-	err = ssb_bus_pcmciabus_register(ssb, dev, win.Base);
+	err = ssb_bus_pcmciabus_register(ssb, dev, dev->resource[2]->start);
 	if (err)
 		goto err_disable;
 	dev->priv = ssb;
@@ -125,9 +121,7 @@ static void __devexit b43_pcmcia_remove(struct pcmcia_device *dev)
 
 static struct pcmcia_driver b43_pcmcia_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-				.name = "b43-pcmcia",
-			},
+	.name		= "b43-pcmcia",
 	.id_table	= b43_pcmcia_tbl,
 	.probe		= b43_pcmcia_probe,
 	.remove		= __devexit_p(b43_pcmcia_remove),

drivers/net/wireless/hostap/hostap_cs.c

@@ -12,7 +12,6 @@
 #include <linux/wireless.h>
 #include <net/iw_handler.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -437,7 +436,6 @@ static int hostap_cs_probe(struct pcmcia_device *p_dev)
 	int ret;
 
 	PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info);
-	p_dev->conf.IntType = INT_MEMORY_AND_IO;
 
 	ret = prism2_config(p_dev);
 	if (ret) {
@@ -468,74 +466,11 @@ static void prism2_detach(struct pcmcia_device *link)
 }
 
 
-/* run after a CARD_INSERTION event is received to configure the PCMCIA
- * socket and make the device available to the system */
-
-static int prism2_config_check(struct pcmcia_device *p_dev,
-			       cistpl_cftable_entry_t *cfg,
-			       cistpl_cftable_entry_t *dflt,
-			       unsigned int vcc,
-			       void *priv_data)
+static int prism2_config_check(struct pcmcia_device *p_dev, void *priv_data)
 {
-	if (cfg->index == 0)
-		return -ENODEV;
-
-	PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
-	       "(default 0x%02X)\n", cfg->index, dflt->index);
-
-	/* Does this card need audio output? */
-	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
-		p_dev->conf.Status = CCSR_AUDIO_ENA;
-	}
-
-	/* Use power settings for Vcc and Vpp if present */
-	/*  Note that the CIS values need to be rescaled */
-	if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
-		    10000 && !ignore_cis_vcc) {
-			PDEBUG(DEBUG_EXTRA, "  Vcc mismatch - skipping"
-			       " this entry\n");
-			return -ENODEV;
-		}
-	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] /
-		    10000 && !ignore_cis_vcc) {
-			PDEBUG(DEBUG_EXTRA, "  Vcc (default) mismatch "
-			       "- skipping this entry\n");
-			return -ENODEV;
-		}
-	}
+	if (p_dev->config_index == 0)
+		return -EINVAL;
 
-	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
-	/* Do we need to allocate an interrupt? */
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
-
-	/* IO window settings */
-	PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
-	       "dflt->io.nwin=%d\n",
-	       cfg->io.nwin, dflt->io.nwin);
-	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
-	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
-		p_dev->resource[0]->flags |=
-					pcmcia_io_cfg_data_width(io->flags);
-		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
-		p_dev->resource[0]->start = io->win[0].base;
-		p_dev->resource[0]->end = io->win[0].len;
-		if (io->nwin > 1) {
-			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
-			p_dev->resource[1]->start = io->win[1].base;
-			p_dev->resource[1]->end = io->win[1].len;
-		}
-	}
-
-	/* This reserves IO space but doesn't actually enable it */
 	return pcmcia_request_io(p_dev);
 }
 
@@ -557,6 +492,10 @@ static int prism2_config(struct pcmcia_device *link)
 	}
 
 	/* Look for an appropriate configuration table entry in the CIS */
+	link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO |
+		CONF_AUTO_CHECK_VCC | CONF_AUTO_SET_IO | CONF_ENABLE_IRQ;
+	if (ignore_cis_vcc)
+		link->config_flags &= ~CONF_AUTO_CHECK_VCC;
 	ret = pcmcia_loop_config(link, prism2_config_check, NULL);
 	if (ret) {
 		if (!ignore_cis_vcc)
@@ -588,12 +527,7 @@ static int prism2_config(struct pcmcia_device *link)
 	if (ret)
 		goto failed_unlock;
 
-	/*
-	 * This actually configures the PCMCIA socket -- setting up
-	 * the I/O windows and the interrupt mapping, and putting the
-	 * card and host interface into "Memory and IO" mode.
-	 */
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed_unlock;
 
@@ -602,20 +536,6 @@ static int prism2_config(struct pcmcia_device *link)
 
 	spin_unlock_irqrestore(&local->irq_init_lock, flags);
 
-	/* Finally, report what we've done */
-	printk(KERN_INFO "%s: index 0x%02x: ",
-	       dev_info, link->conf.ConfigIndex);
-	if (link->conf.Vpp)
-		printk(", Vpp %d.%d", link->conf.Vpp / 10,
-		       link->conf.Vpp % 10);
-	if (link->conf.Attributes & CONF_ENABLE_IRQ)
-		printk(", irq %d", link->irq);
-	if (link->resource[0])
-		printk(" & %pR", link->resource[0]);
-	if (link->resource[1])
-		printk(" & %pR", link->resource[1]);
-	printk("\n");
-
 	local->shutdown = 0;
 
 	sandisk_enable_wireless(dev);
@@ -627,7 +547,7 @@ static int prism2_config(struct pcmcia_device *link)
 	return ret;
 
  failed_unlock:
-	 spin_unlock_irqrestore(&local->irq_init_lock, flags);
+	spin_unlock_irqrestore(&local->irq_init_lock, flags);
  failed:
 	kfree(hw_priv);
 	prism2_release((u_long)link);
@@ -779,9 +699,7 @@ MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids);
 
 
 static struct pcmcia_driver hostap_driver = {
-	.drv		= {
-		.name	= "hostap_cs",
-	},
+	.name		= "hostap_cs",
 	.probe		= hostap_cs_probe,
 	.remove		= prism2_detach,
 	.owner		= THIS_MODULE,

drivers/net/wireless/libertas/if_cs.c

@@ -28,7 +28,6 @@
 #include <linux/firmware.h>
 #include <linux/netdevice.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 
@@ -761,15 +760,6 @@ static int if_cs_host_to_card(struct lbs_private *priv,
 }
 
 
-/********************************************************************/
-/* Card Services                                                    */
-/********************************************************************/
-
-/*
- * After a card is removed, if_cs_release() will unregister the
- * device, and release the PCMCIA configuration.  If the device is
- * still open, this will be postponed until it is closed.
- */
 static void if_cs_release(struct pcmcia_device *p_dev)
 {
 	struct if_cs_card *card = p_dev->priv;
@@ -785,31 +775,12 @@ static void if_cs_release(struct pcmcia_device *p_dev)
 }
 
 
-/*
- * This creates an "instance" of the driver, allocating local data
- * structures for one device.  The device is registered with Card
- * Services.
- *
- * The dev_link structure is initialized, but we don't actually
- * configure the card at this point -- we wait until we receive a card
- * insertion event.
- */
-
-static int if_cs_ioprobe(struct pcmcia_device *p_dev,
-			 cistpl_cftable_entry_t *cfg,
-			 cistpl_cftable_entry_t *dflt,
-			 unsigned int vcc,
-			 void *priv_data)
+static int if_cs_ioprobe(struct pcmcia_device *p_dev, void *priv_data)
 {
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
 	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
-	p_dev->resource[0]->start = cfg->io.win[0].base;
-	p_dev->resource[0]->end = cfg->io.win[0].len;
-
-	/* Do we need to allocate an interrupt? */
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
-	/* IO window settings */
-	if (cfg->io.nwin != 1) {
+	if (p_dev->resource[1]->end) {
 		lbs_pr_err("wrong CIS (check number of IO windows)\n");
 		return -ENODEV;
 	}
@@ -835,15 +806,13 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 	card->p_dev = p_dev;
 	p_dev->priv = card;
 
-	p_dev->conf.Attributes = 0;
-	p_dev->conf.IntType = INT_MEMORY_AND_IO;
+	p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
 
 	if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) {
 		lbs_pr_err("error in pcmcia_loop_config\n");
 		goto out1;
 	}
 
-
 	/*
 	 * Allocate an interrupt line.  Note that this does not assign
 	 * a handler to the interrupt, unless the 'Handler' member of
@@ -861,14 +830,9 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 		goto out1;
 	}
 
-	/*
-	 * This actually configures the PCMCIA socket -- setting up
-	 * the I/O windows and the interrupt mapping, and putting the
-	 * card and host interface into "Memory and IO" mode.
-	 */
-	ret = pcmcia_request_configuration(p_dev, &p_dev->conf);
+	ret = pcmcia_enable_device(p_dev);
 	if (ret) {
-		lbs_pr_err("error in pcmcia_request_configuration\n");
+		lbs_pr_err("error in pcmcia_enable_device\n");
 		goto out2;
 	}
 
@@ -962,12 +926,6 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 }
 
 
-/*
- * This deletes a driver "instance".  The device is de-registered with
- * Card Services.  If it has been released, all local data structures
- * are freed.  Otherwise, the structures will be freed when the device
- * is released.
- */
 static void if_cs_detach(struct pcmcia_device *p_dev)
 {
 	struct if_cs_card *card = p_dev->priv;
@@ -1000,9 +958,7 @@ MODULE_DEVICE_TABLE(pcmcia, if_cs_ids);
 
 static struct pcmcia_driver lbs_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= DRV_NAME,
-	},
+	.name		= DRV_NAME,
 	.probe		= if_cs_probe,
 	.remove		= if_cs_detach,
 	.id_table       = if_cs_ids,

drivers/net/wireless/ray_cs.c

@@ -46,7 +46,6 @@
 #include <linux/ethtool.h>
 #include <linux/ieee80211.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -169,13 +168,6 @@ static int bc;
  */
 static char *phy_addr = NULL;
 
-
-/* A struct pcmcia_device structure has fields for most things that are needed
-   to keep track of a socket, but there will usually be some device
-   specific information that also needs to be kept track of.  The
-   'priv' pointer in a struct pcmcia_device structure can be used to point to
-   a device-specific private data structure, like this.
-*/
 static unsigned int ray_mem_speed = 500;
 
 /* WARNING: THIS DRIVER IS NOT CAPABLE OF HANDLING MULTIPLE DEVICES! */
@@ -290,14 +282,6 @@ static const struct net_device_ops ray_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 };
 
-/*=============================================================================
-    ray_attach() creates an "instance" of the driver, allocating
-    local data structures for one device.  The device is registered
-    with Card Services.
-    The dev_link structure is initialized, but we don't actually
-    configure the card at this point -- we wait until we receive a
-    card insertion event.
-=============================================================================*/
 static int ray_probe(struct pcmcia_device *p_dev)
 {
 	ray_dev_t *local;
@@ -318,9 +302,8 @@ static int ray_probe(struct pcmcia_device *p_dev)
 	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 
 	/* General socket configuration */
-	p_dev->conf.Attributes = CONF_ENABLE_IRQ;
-	p_dev->conf.IntType = INT_MEMORY_AND_IO;
-	p_dev->conf.ConfigIndex = 1;
+	p_dev->config_flags |= CONF_ENABLE_IRQ;
+	p_dev->config_index = 1;
 
 	p_dev->priv = dev;
 
@@ -353,12 +336,6 @@ static int ray_probe(struct pcmcia_device *p_dev)
 	return -ENOMEM;
 } /* ray_attach */
 
-/*=============================================================================
-    This deletes a driver "instance".  The device is de-registered
-    with Card Services.  If it has been released, all local data
-    structures are freed.  Otherwise, the structures will be freed
-    when the device is released.
-=============================================================================*/
 static void ray_detach(struct pcmcia_device *link)
 {
 	struct net_device *dev;
@@ -381,17 +358,11 @@ static void ray_detach(struct pcmcia_device *link)
 	dev_dbg(&link->dev, "ray_cs ray_detach ending\n");
 } /* ray_detach */
 
-/*=============================================================================
-    ray_config() is run after a CARD_INSERTION event
-    is received, to configure the PCMCIA socket, and to make the
-    ethernet device available to the system.
-=============================================================================*/
 #define MAX_TUPLE_SIZE 128
 static int ray_config(struct pcmcia_device *link)
 {
 	int ret = 0;
 	int i;
-	win_req_t req;
 	struct net_device *dev = (struct net_device *)link->priv;
 	ray_dev_t *local = netdev_priv(dev);
 
@@ -412,54 +383,50 @@ static int ray_config(struct pcmcia_device *link)
 		goto failed;
 	dev->irq = link->irq;
 
-	/* This actually configures the PCMCIA socket -- setting up
-	   the I/O windows and the interrupt mapping.
-	 */
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 
 /*** Set up 32k window for shared memory (transmit and control) ************/
-	req.Attributes =
-	    WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT;
-	req.Base = 0;
-	req.Size = 0x8000;
-	req.AccessSpeed = ray_mem_speed;
-	ret = pcmcia_request_window(link, &req, &link->win);
+	link->resource[2]->flags |= WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT;
+	link->resource[2]->start = 0;
+	link->resource[2]->end = 0x8000;
+	ret = pcmcia_request_window(link, link->resource[2], ray_mem_speed);
 	if (ret)
 		goto failed;
-	ret = pcmcia_map_mem_page(link, link->win, 0);
+	ret = pcmcia_map_mem_page(link, link->resource[2], 0);
 	if (ret)
 		goto failed;
-	local->sram = ioremap(req.Base, req.Size);
+	local->sram = ioremap(link->resource[2]->start,
+			resource_size(link->resource[2]));
 
 /*** Set up 16k window for shared memory (receive buffer) ***************/
-	req.Attributes =
+	link->resource[3]->flags |=
 	    WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT;
-	req.Base = 0;
-	req.Size = 0x4000;
-	req.AccessSpeed = ray_mem_speed;
-	ret = pcmcia_request_window(link, &req, &local->rmem_handle);
+	link->resource[3]->start = 0;
+	link->resource[3]->end = 0x4000;
+	ret = pcmcia_request_window(link, link->resource[3], ray_mem_speed);
 	if (ret)
 		goto failed;
-	ret = pcmcia_map_mem_page(link, local->rmem_handle, 0x8000);
+	ret = pcmcia_map_mem_page(link, link->resource[3], 0x8000);
 	if (ret)
 		goto failed;
-	local->rmem = ioremap(req.Base, req.Size);
+	local->rmem = ioremap(link->resource[3]->start,
+			resource_size(link->resource[3]));
 
 /*** Set up window for attribute memory ***********************************/
-	req.Attributes =
+	link->resource[4]->flags |=
 	    WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM | WIN_ENABLE | WIN_USE_WAIT;
-	req.Base = 0;
-	req.Size = 0x1000;
-	req.AccessSpeed = ray_mem_speed;
-	ret = pcmcia_request_window(link, &req, &local->amem_handle);
+	link->resource[4]->start = 0;
+	link->resource[4]->end = 0x1000;
+	ret = pcmcia_request_window(link, link->resource[4], ray_mem_speed);
 	if (ret)
 		goto failed;
-	ret = pcmcia_map_mem_page(link, local->amem_handle, 0);
+	ret = pcmcia_map_mem_page(link, link->resource[4], 0);
 	if (ret)
 		goto failed;
-	local->amem = ioremap(req.Base, req.Size);
+	local->amem = ioremap(link->resource[4]->start,
+			resource_size(link->resource[4]));
 
 	dev_dbg(&link->dev, "ray_config sram=%p\n", local->sram);
 	dev_dbg(&link->dev, "ray_config rmem=%p\n", local->rmem);
@@ -775,11 +742,7 @@ static void join_net(u_long data)
 	local->card_status = CARD_DOING_ACQ;
 }
 
-/*============================================================================
-    After a card is removed, ray_release() will unregister the net
-    device, and release the PCMCIA configuration.  If the device is
-    still open, this will be postponed until it is closed.
-=============================================================================*/
+
 static void ray_release(struct pcmcia_device *link)
 {
 	struct net_device *dev = link->priv;
@@ -2847,9 +2810,7 @@ MODULE_DEVICE_TABLE(pcmcia, ray_ids);
 
 static struct pcmcia_driver ray_driver = {
 	.owner = THIS_MODULE,
-	.drv = {
-		.name = "ray_cs",
-		},
+	.name = "ray_cs",
 	.probe = ray_probe,
 	.remove = ray_detach,
 	.id_table = ray_ids,

drivers/net/wireless/ray_cs.h

@@ -25,8 +25,6 @@ struct beacon_rx {
 typedef struct ray_dev_t {
     int card_status;
     int authentication_state;
-    window_handle_t amem_handle;   /* handle to window for attribute memory  */
-    window_handle_t rmem_handle;   /* handle to window for rx buffer on card */
     void __iomem *sram;            /* pointer to beginning of shared RAM     */
     void __iomem *amem;            /* pointer to attribute mem window        */
     void __iomem *rmem;            /* pointer to receive buffer window       */

drivers/pcmcia/au1000_generic.h

@@ -23,7 +23,6 @@
 
 /* include the world */
 
-#include <pcmcia/cs.h>
 #include <pcmcia/ss.h>
 #include <pcmcia/cistpl.h>
 #include "cs_internal.h"