V4L/DVB: Complete rewrite of the DiB3000mc-driver

A complete rewrite of the DiB3000MC/P driver has been done. It is now much more
easy to maintain and to get improvements inside.

Additionally the tuning time has been reduced and the usage of the driver is
much more understandable now.
Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
Signed-off-by: Francois KANOUNNIKOFF <fkanounnikoff@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/dvb/dvb-usb/dibusb-common.c

@@ -131,9 +131,6 @@ static int dibusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num
 	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
 		return -EAGAIN;
 
-	if (num > 2)
-		warn("more than 2 i2c messages at a time is not handled yet. TODO.");
-
 	for (i = 0; i < num; i++) {
 		/* write/read request */
 		if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
@@ -168,31 +165,137 @@ int dibusb_read_eeprom_byte(struct dvb_usb_device *d, u8 offs, u8 *val)
 }
 EXPORT_SYMBOL(dibusb_read_eeprom_byte);
 
-static const struct dib3000p_agc_config dib3000p_agc_panasonic_env57h1xd5 = {
-	{ 0x51, 0x301d, 0x0, 0x1cc7, 0xdc29, 0x570a,
-	0xbae1, 0x8ccd, 0x3b6d, 0x551d, 0xa, 0x951e }
+/* 3000MC/P stuff */
+// Config Adjacent channels  Perf -cal22
+static struct dibx000_agc_config dib3000p_mt2060_agc_config = {
+	.band_caps = BAND_VHF | BAND_UHF,
+	.setup     = (0 << 15) | (0 << 14) | (1 << 13) | (1 << 12) | (29 << 0),
+
+	.agc1_max = 48497,
+	.agc1_min = 23593,
+	.agc2_max = 46531,
+	.agc2_min = 24904,
+
+	.agc1_pt1 = 0x65,
+	.agc1_pt2 = 0x69,
+
+	.agc1_slope1 = 0x51,
+	.agc1_slope2 = 0x27,
+
+	.agc2_pt1 = 0,
+	.agc2_pt2 = 0x33,
+
+	.agc2_slope1 = 0x35,
+	.agc2_slope2 = 0x37,
 };
 
-static const struct dib3000p_agc_config dib3000p_agc_microtune_mt2060 = {
-	{ 0x196, 0x301d, 0x0, 0x1cc7, 0xffff, 0x5c29,
-	0xa8f6, 0x5eb8, 0x65ff, 0x40ff,	0x8a, 0x1114 }
+static struct dib3000mc_config stk3000p_dib3000p_config = {
+	&dib3000p_mt2060_agc_config,
+
+	.max_time     = 0x196,
+	.ln_adc_level = 0x1cc7,
+
+	.output_mpeg2_in_188_bytes = 1,
 };
 
-static struct mt2060_config stk3000p_mt2060_config = {
-	.i2c_address = 0x60,
+static struct dibx000_agc_config dib3000p_panasonic_agc_config = {
+	.setup     = (0 << 15) | (0 << 14) | (1 << 13) | (1 << 12) | (29 << 0),
+
+	.agc1_max = 56361,
+	.agc1_min = 22282,
+	.agc2_max = 43254,
+	.agc2_min = 36045,
+
+	.agc1_pt1 = 0x65,
+	.agc1_pt2 = 0xff,
+
+	.agc1_slope1 = 0x40,
+	.agc1_slope2 = 0xff,
+
+	.agc2_pt1 = 0,
+	.agc2_pt2 = 0x8a,
+
+	.agc2_slope1 = 0x11,
+	.agc2_slope2 = 0x14,
+};
+
+static struct dib3000mc_config mod3000p_dib3000p_config = {
+	&dib3000p_panasonic_agc_config,
+
+	.max_time     = 0x51,
+	.ln_adc_level = 0x1cc7,
+
+	.output_mpeg2_in_188_bytes = 1,
 };
 
 int dibusb_dib3000mc_frontend_attach(struct dvb_usb_device *d)
 {
-	struct dib3000_config demod_cfg;
+	if (dib3000mc_attach(&d->i2c_adap, 1, DEFAULT_DIB3000P_I2C_ADDRESS, 0, &mod3000p_dib3000p_config, &d->fe) == 0) {
+		if (d->priv != NULL) {
 			struct dibusb_state *st = d->priv;
+			st->ops.pid_parse = dib3000mc_pid_parse;
+			st->ops.pid_ctrl  = dib3000mc_pid_control;
+		}
+		return 0;
+	}
 	return -ENODEV;
 }
 EXPORT_SYMBOL(dibusb_dib3000mc_frontend_attach);
 
+static struct mt2060_config stk3000p_mt2060_config = {
+	0x60
+};
+
 int dibusb_dib3000mc_tuner_attach (struct dvb_usb_device *d)
 {
-	return -ENODEV;
+	struct dibusb_state *st = d->priv;
+	int ret;
+	u8 a,b;
+	u16 if1 = 1220;
+	struct i2c_adapter *tun_i2c;
+
+	// First IF calibration for Liteon Sticks
+	if (d->udev->descriptor.idVendor == USB_VID_LITEON &&
+		d->udev->descriptor.idProduct == USB_PID_LITEON_DVB_T_WARM) {
+
+		dibusb_read_eeprom_byte(d,0x7E,&a);
+		dibusb_read_eeprom_byte(d,0x7F,&b);
+
+		if (a == 0x00)
+			if1 += b;
+		else if (a == 0x80)
+			if1 -= b;
+		else
+			warn("LITE-ON DVB-T: Strange IF1 calibration :%2X %2X\n", a, b);
+
+	} else if (d->udev->descriptor.idVendor  == USB_VID_DIBCOM &&
+		   d->udev->descriptor.idProduct == USB_PID_DIBCOM_MOD3001_WARM) {
+		u8 desc;
+		dibusb_read_eeprom_byte(d, 7, &desc);
+		if (desc == 2) {
+			a = 127;
+			do {
+				dibusb_read_eeprom_byte(d, a, &desc);
+				a--;
+			} while (a > 7 && (desc == 0xff || desc == 0x00));
+			if (desc & 0x80)
+				if1 -= (0xff - desc);
+			else
+				if1 += desc;
+		}
+	}
+
+	tun_i2c = dib3000mc_get_tuner_i2c_master(d->fe, 1);
+	if ((ret = mt2060_attach(d->fe, tun_i2c, &stk3000p_mt2060_config, if1)) != 0) {
+		/* not found - use panasonic pll parameters */
+		if (dvb_pll_attach(d->fe, 0x60, tun_i2c, &dvb_pll_env57h1xd5) == NULL)
+			return -ENOMEM;
+	} else {
+		st->mt2060_present = 1;
+		/* set the correct parameters for the dib3000p */
+		dib3000mc_set_config(d->fe, &stk3000p_dib3000p_config);
+	}
+	return 0;
 }
 EXPORT_SYMBOL(dibusb_dib3000mc_tuner_attach);
 

drivers/media/dvb/dvb-usb/dibusb-mb.c

@@ -20,11 +20,12 @@ static int dibusb_dib3000mb_frontend_attach(struct dvb_usb_device *d)
 	struct dibusb_state *st = d->priv;
 
 	demod_cfg.demod_address = 0x8;
-	demod_cfg.pll_set = dvb_usb_pll_set_i2c;
-	demod_cfg.pll_init = dvb_usb_pll_init_i2c;
 
-	if ((d->fe = dib3000mb_attach(&demod_cfg,&d->i2c_adap,&st->ops)) == NULL)
+	if ((d->fe = dib3000mb_attach(&demod_cfg,&d->i2c_adap,&st->ops)) == NULL) {
+		d->fe->ops.tuner_ops.init = dvb_usb_tuner_init_i2c;
+		d->fe->ops.tuner_ops.set_params = dvb_usb_tuner_set_params_i2c;
 		return -ENODEV;
+	}
 
 	d->tuner_pass_ctrl = st->ops.tuner_pass_ctrl;
 

drivers/media/dvb/dvb-usb/dibusb.h

@@ -17,6 +17,7 @@
 #include "dvb-usb.h"
 
 #include "dib3000.h"
+#include "dib3000mc.h"
 #include "mt2060.h"
 
 /*

drivers/media/dvb/dvb-usb/dvb-usb-dvb.c

@@ -179,16 +179,15 @@ int dvb_usb_fe_init(struct dvb_usb_device* d)
 		return 0;
 	}
 
-	d->props.frontend_attach(d);
-
 	/* re-assign sleep and wakeup functions */
-	if (d->fe != NULL) {
+	if (d->props.frontend_attach(d) == 0 && d->fe != NULL) {
 		d->fe_init = d->fe->ops.init;   d->fe->ops.init  = dvb_usb_fe_wakeup;
 		d->fe_sleep = d->fe->ops.sleep; d->fe->ops.sleep = dvb_usb_fe_sleep;
 
 		if (dvb_register_frontend(&d->dvb_adap, d->fe)) {
 			err("Frontend registration failed.");
-			dvb_frontend_detach(d->fe);
+			if (d->fe->ops.release)
+				d->fe->ops.release(d->fe);
 			d->fe = NULL;
 			return -ENODEV;
 		}
@@ -203,9 +202,7 @@ int dvb_usb_fe_init(struct dvb_usb_device* d)
 
 int dvb_usb_fe_exit(struct dvb_usb_device *d)
 {
-	if (d->fe != NULL) {
+	if (d->fe != NULL)
 		dvb_unregister_frontend(d->fe);
-		dvb_frontend_detach(d->fe);
-	}
 	return 0;
 }

drivers/media/dvb/frontends/Makefile

@@ -12,7 +12,7 @@ obj-$(CONFIG_DVB_CX24110) += cx24110.o
 obj-$(CONFIG_DVB_TDA8083) += tda8083.o
 obj-$(CONFIG_DVB_L64781) += l64781.o
 obj-$(CONFIG_DVB_DIB3000MB) += dib3000mb.o
-obj-$(CONFIG_DVB_DIB3000MC) += dib3000mc.o
+obj-$(CONFIG_DVB_DIB3000MC) += dib3000mc.o dibx000_common.o
 obj-$(CONFIG_DVB_MT312) += mt312.o
 obj-$(CONFIG_DVB_VES1820) += ves1820.o
 obj-$(CONFIG_DVB_VES1X93) += ves1x93.o
@@ -31,6 +31,8 @@ obj-$(CONFIG_DVB_BCM3510) += bcm3510.o
 obj-$(CONFIG_DVB_S5H1420) += s5h1420.o
 obj-$(CONFIG_DVB_LGDT330X) += lgdt330x.o
 obj-$(CONFIG_DVB_CX24123) += cx24123.o
+obj-$(CONFIG_DVB_LNBP21) += lnbp21.o
+obj-$(CONFIG_DVB_ISL6421) += isl6421.o
 obj-$(CONFIG_DVB_TDA10086) += tda10086.o
 obj-$(CONFIG_DVB_TDA826X) += tda826x.o
 obj-$(CONFIG_DVB_TUNER_MT2060) += mt2060.o

drivers/media/dvb/frontends/dib3000.h

@@ -26,20 +26,10 @@
 
 #include <linux/dvb/frontend.h>
 
-struct dib3000p_agc_config {
-	u16 val[12];
-};
-
 struct dib3000_config
 {
 	/* the demodulator's i2c address */
 	u8 demod_address;
-
-	const struct dib3000p_agc_config *agc;
-
-	/* PLL maintenance and the i2c address of the PLL */
-	int (*pll_init)(struct dvb_frontend *fe);
-	int (*pll_set)(struct dvb_frontend *fe, struct dvb_frontend_parameters* params);
 };
 
 struct dib_fe_xfer_ops
@@ -51,11 +41,16 @@ struct dib_fe_xfer_ops
 	int (*tuner_pass_ctrl)(struct dvb_frontend *fe, int onoff, u8 pll_ctrl);
 };
 
+#if defined(CONFIG_DVB_DIB3000MB) || defined(CONFIG_DVB_DIB3000MB_MODULE)
 extern struct dvb_frontend* dib3000mb_attach(const struct dib3000_config* config,
 					     struct i2c_adapter* i2c, struct dib_fe_xfer_ops *xfer_ops);
+#else
+static inline struct dvb_frontend* dib3000mb_attach(const struct dib3000_config* config,
+					     struct i2c_adapter* i2c, struct dib_fe_xfer_ops *xfer_ops)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+	return NULL;
+}
+#endif // CONFIG_DVB_DIB3000MB
 
-extern struct dvb_frontend* dib3000mc_attach(const struct dib3000_config* config,
-					     struct i2c_adapter* i2c, struct dib_fe_xfer_ops *xfer_ops);
-
-extern int dib3000mc_set_agc_config(struct dvb_frontend *fe, const struct dib3000p_agc_config *agc);
 #endif // DIB3000_H

drivers/media/dvb/frontends/dib3000mb_priv.h

@@ -83,9 +83,6 @@
 #define DIB3000_TUNER_WRITE_ENABLE(a)	(0xffff & (a << 8))
 #define DIB3000_TUNER_WRITE_DISABLE(a)	(0xffff & ((a << 8) | (1 << 7)))
 
-/* for auto search */
-extern u16 dib3000_seq[2][2][2];
-
 #define DIB3000_REG_MANUFACTOR_ID		(  1025)
 #define DIB3000_I2C_ID_DIBCOM			(0x01b3)
 

drivers/media/dvb/frontends/dib3000mc.c

 /*
- * Frontend driver for mobile DVB-T demodulator DiBcom 3000P/M-C
- * DiBcom (http://www.dibcom.fr/)
+ * Driver for DiBcom DiB3000MC/P-demodulator.
  *
+ * Copyright (C) 2004-6 DiBcom (http://www.dibcom.fr/)
  * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
  *
- * based on GPL code from DiBCom, which has
- *
- * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr)
+ * This code is partially based on the previous dib3000mc.c .
  *
  * This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License as
  *	published by the Free Software Foundation, version 2.
- *
- * Acknowledgements
- *
- *  Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver
- *  sources, on which this driver (and the dvb-dibusb) are based.
- *
- * see Documentation/dvb/README.dibusb for more information
- *
  */
-#include <linux/config.h>
+
 #include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include "dib3000-common.h"
-#include "dib3000mc_priv.h"
-#include "dib3000.h"
-
-/* Version information */
-#define DRIVER_VERSION "0.1"
-#define DRIVER_DESC "DiBcom 3000M-C DVB-T demodulator"
-#define DRIVER_AUTHOR "Patrick Boettcher, patrick.boettcher@desy.de"
-
-#ifdef CONFIG_DVB_DIBCOM_DEBUG
+#include <linux/i2c.h>
+//#include <linux/init.h>
+//#include <linux/delay.h>
+//#include <linux/string.h>
+//#include <linux/slab.h>
+
+#include "dvb_frontend.h"
+
+#include "dib3000mc.h"
+
 static int debug;
 module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info,2=xfer,4=setfe,8=getfe,16=stat (|-able)).");
-#endif
-#define deb_info(args...) dprintk(0x01,args)
-#define deb_xfer(args...) dprintk(0x02,args)
-#define deb_setf(args...) dprintk(0x04,args)
-#define deb_getf(args...) dprintk(0x08,args)
-#define deb_stat(args...) dprintk(0x10,args)
-
-static int dib3000mc_set_impulse_noise(struct dib3000_state * state, int mode,
-	fe_transmit_mode_t transmission_mode, fe_bandwidth_t bandwidth)
-{
-	switch (transmission_mode) {
-		case TRANSMISSION_MODE_2K:
-			wr_foreach(dib3000mc_reg_fft,dib3000mc_fft_modes[0]);
-			break;
-		case TRANSMISSION_MODE_8K:
-			wr_foreach(dib3000mc_reg_fft,dib3000mc_fft_modes[1]);
-			break;
-		default:
-			break;
-	}
+MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
 
-	switch (bandwidth) {
-/*		case BANDWIDTH_5_MHZ:
-			wr_foreach(dib3000mc_reg_impulse_noise,dib3000mc_impluse_noise[0]);
-			break; */
-		case BANDWIDTH_6_MHZ:
-			wr_foreach(dib3000mc_reg_impulse_noise,dib3000mc_impluse_noise[1]);
-			break;
-		case BANDWIDTH_7_MHZ:
-			wr_foreach(dib3000mc_reg_impulse_noise,dib3000mc_impluse_noise[2]);
-			break;
-		case BANDWIDTH_8_MHZ:
-			wr_foreach(dib3000mc_reg_impulse_noise,dib3000mc_impluse_noise[3]);
-			break;
-		default:
-			break;
+#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB3000MC/P:"); printk(args); } } while (0)
+
+struct dib3000mc_state {
+	struct dvb_frontend demod;
+	struct dib3000mc_config *cfg;
+
+	u8 i2c_addr;
+	struct i2c_adapter *i2c_adap;
+
+	struct dibx000_i2c_master i2c_master;
+
+	fe_bandwidth_t current_bandwidth;
+
+	u16 dev_id;
+};
+
+static u16 dib3000mc_read_word(struct dib3000mc_state *state, u16 reg)
+{
+	u8 wb[2] = { (reg >> 8) | 0x80, reg & 0xff };
+	u8 rb[2];
+	struct i2c_msg msg[2] = {
+		{ .addr = state->i2c_addr >> 1, .flags = 0,        .buf = wb, .len = 2 },
+		{ .addr = state->i2c_addr >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2 },
+	};
+
+	if (i2c_transfer(state->i2c_adap, msg, 2) != 2)
+		dprintk("i2c read error on %d\n",reg);
+
+	return (rb[0] << 8) | rb[1];
+}
+
+static int dib3000mc_write_word(struct dib3000mc_state *state, u16 reg, u16 val)
+{
+	u8 b[4] = {
+		(reg >> 8) & 0xff, reg & 0xff,
+		(val >> 8) & 0xff, val & 0xff,
+	};
+	struct i2c_msg msg = {
+		.addr = state->i2c_addr >> 1, .flags = 0, .buf = b, .len = 4
+	};
+	return i2c_transfer(state->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
+}
+
+static void dump_fep(struct dibx000_ofdm_channel *cd)
+{
+	printk(KERN_DEBUG "DiB3000MC: ");
+	switch (cd->nfft) {
+		case 1: printk("8K "); break;
+		case 2: printk("4K "); break;
+		case 0: printk("2K "); break;
+		default: printk("FFT_UNK "); break;
+	}
+
+	printk("1/%i  ", 32 / (1 << cd->guard));
+	switch (cd->nqam) {
+		case 0: printk("QPSK "); break;
+		case 1: printk("16QAM "); break;
+		case 2: printk("64QAM "); break;
+		default: printk("QAM_UNK "); break;
+	}
+	printk("ALPHA %i ", cd->vit_alpha);
+	printk("Code Rate HP %i/%i ", cd->vit_code_rate_hp, cd->vit_code_rate_hp + 1);
+	printk("Code Rate LP %i/%i ", cd->vit_code_rate_lp, cd->vit_code_rate_lp + 1);
+	printk("HRCH %i\n", cd->vit_hrch);
+}
+
+
+static int dib3000mc_identify(struct dib3000mc_state *state)
+{
+	u16 value;
+	if ((value = dib3000mc_read_word(state, 1025)) != 0x01b3) {
+		dprintk("-E-  DiB3000MC/P: wrong Vendor ID (read=0x%x)\n",value);
+		return -EREMOTEIO;
 	}
 
-	switch (mode) {
-		case 0: /* no impulse */ /* fall through */
-			wr_foreach(dib3000mc_reg_imp_noise_ctl,dib3000mc_imp_noise_ctl[0]);
-			break;
-		case 1: /* new algo */
-			wr_foreach(dib3000mc_reg_imp_noise_ctl,dib3000mc_imp_noise_ctl[1]);
-			set_or(DIB3000MC_REG_IMP_NOISE_55,DIB3000MC_IMP_NEW_ALGO(0)); /* gives 1<<10 */
-			break;
-		default: /* old algo */
-			wr_foreach(dib3000mc_reg_imp_noise_ctl,dib3000mc_imp_noise_ctl[3]);
-			break;
+	value = dib3000mc_read_word(state, 1026);
+	if (value != 0x3001 && value != 0x3002) {
+		dprintk("-E-  DiB3000MC/P: wrong Device ID (%x)\n",value);
+		return -EREMOTEIO;
 	}
+	state->dev_id = value;
+
+	dprintk("-I-  found DiB3000MC/P: %x\n",state->dev_id);
+
 	return 0;
 }
 
-static int dib3000mc_set_timing(struct dib3000_state *state, int upd_offset,
-		fe_transmit_mode_t fft, fe_bandwidth_t bw)
+static int dib3000mc_set_timing(struct dib3000mc_state *state, s16 nfft, u8 bw, u8 update_offset)
 {
-	u16 timf_msb,timf_lsb;
-	s32 tim_offset,tim_sgn;
-	u64 comp1,comp2,comp=0;
-
-	switch (bw) {
-		case BANDWIDTH_8_MHZ: comp = DIB3000MC_CLOCK_REF*8; break;
-		case BANDWIDTH_7_MHZ: comp = DIB3000MC_CLOCK_REF*7; break;
-		case BANDWIDTH_6_MHZ: comp = DIB3000MC_CLOCK_REF*6; break;
-		default: err("unknown bandwidth (%d)",bw); break;
-	}
-	timf_msb = (comp >> 16) & 0xff;
-	timf_lsb = (comp & 0xffff);
+/*
+	u32 timf_msb, timf_lsb, i;
+	int tim_sgn ;
+	LUInt comp1, comp2, comp ;
+//	u32 tim_offset ;
+	comp = 27700 * BW_INDEX_TO_KHZ(bw) / 1000;
+	timf_msb = (comp >> 16) & 0x00FF;
+	timf_lsb =  comp        & 0xFFFF;
 
 	// Update the timing offset ;
-	if (upd_offset > 0) {
-		if (!state->timing_offset_comp_done) {
-			msleep(200);
+	if (update_offset) {
+		if (state->timing_offset_comp_done == 0) {
+			usleep(200000);
 			state->timing_offset_comp_done = 1;
 		}
-		tim_offset = rd(DIB3000MC_REG_TIMING_OFFS_MSB);
+		tim_offset = dib3000mc_read_word(state, 416);
 		if ((tim_offset & 0x2000) == 0x2000)
-			tim_offset |= 0xC000;
-		if (fft == TRANSMISSION_MODE_2K)
-			tim_offset <<= 2;
+			tim_offset |= 0xC000; // PB: This only works if tim_offset is s16 - weird
+
+		if (nfft == 0)
+			tim_offset = tim_offset << 2; // PB: Do not store the offset for different things in one variable
 		state->timing_offset += tim_offset;
 	}
-
 	tim_offset = state->timing_offset;
+
 	if (tim_offset < 0) {
 		tim_sgn = 1;
 		tim_offset = -tim_offset;
 	} else
 		tim_sgn = 0;
 
-	comp1 =  (u32)tim_offset * (u32)timf_lsb ;
-	comp2 =  (u32)tim_offset * (u32)timf_msb ;
+	comp1 = tim_offset * timf_lsb;
+	comp2 = tim_offset * timf_msb;
 	comp  = ((comp1 >> 16) + comp2) >> 7;
 
 	if (tim_sgn == 0)
-		comp = (u32)(timf_msb << 16) + (u32) timf_lsb + comp;
+		comp = timf_msb * (1<<16) + timf_lsb + comp;
 	else
-		comp = (u32)(timf_msb << 16) + (u32) timf_lsb - comp ;
+		comp = timf_msb * (1<<16) + timf_lsb - comp;
+
+	timf_msb = (comp>>16)&0xFF ;
+	timf_lsb = comp&0xFFFF;
+*/
+	u32 timf = 1384402 * (BW_INDEX_TO_KHZ(bw) / 1000);
 
-	timf_msb = (comp >> 16) & 0xff;
-	timf_lsb = comp & 0xffff;
+	dib3000mc_write_word(state, 23, timf >> 16);
+	dib3000mc_write_word(state, 24, timf & 0xffff);
 
-	wr(DIB3000MC_REG_TIMING_FREQ_MSB,timf_msb);
-	wr(DIB3000MC_REG_TIMING_FREQ_LSB,timf_lsb);
 	return 0;
 }
 
-static int dib3000mc_init_auto_scan(struct dib3000_state *state, fe_bandwidth_t bw, int boost)
+static int dib3000mc_setup_pwm3_state(struct dib3000mc_state *state)
 {
-	if (boost) {
-		wr(DIB3000MC_REG_SCAN_BOOST,DIB3000MC_SCAN_BOOST_ON);
+    if (state->cfg->pwm3_inversion) {
+		dib3000mc_write_word(state, 51, (2 << 14) | (0 << 10) | (7 << 6) | (2 << 2) | (2 << 0));
+		dib3000mc_write_word(state, 52, (0 << 8) | (5 << 5) | (1 << 4) | (1 << 3) | (1 << 2) | (2 << 0));
 	} else {
-		wr(DIB3000MC_REG_SCAN_BOOST,DIB3000MC_SCAN_BOOST_OFF);
-	}
-	switch (bw) {
-		case BANDWIDTH_8_MHZ:
-			wr_foreach(dib3000mc_reg_bandwidth,dib3000mc_bandwidth_8mhz);
-			break;
-		case BANDWIDTH_7_MHZ:
-			wr_foreach(dib3000mc_reg_bandwidth,dib3000mc_bandwidth_7mhz);
-			break;
-		case BANDWIDTH_6_MHZ:
-			wr_foreach(dib3000mc_reg_bandwidth,dib3000mc_bandwidth_6mhz);
-			break;
-/*		case BANDWIDTH_5_MHZ:
-			wr_foreach(dib3000mc_reg_bandwidth,dib3000mc_bandwidth_5mhz);
-			break;*/
-		case BANDWIDTH_AUTO:
-			return -EOPNOTSUPP;
-		default:
-			err("unknown bandwidth value (%d).",bw);
-			return -EINVAL;
-	}
-	if (boost) {
-		u32 timeout = (rd(DIB3000MC_REG_BW_TIMOUT_MSB) << 16) +
-			rd(DIB3000MC_REG_BW_TIMOUT_LSB);
-		timeout *= 85; timeout >>= 7;
-		wr(DIB3000MC_REG_BW_TIMOUT_MSB,(timeout >> 16) & 0xffff);
-		wr(DIB3000MC_REG_BW_TIMOUT_LSB,timeout & 0xffff);
+		dib3000mc_write_word(state, 51, (2 << 14) | (4 << 10) | (7 << 6) | (2 << 2) | (2 << 0));
+		dib3000mc_write_word(state, 52, (1 << 8) | (5 << 5) | (1 << 4) | (1 << 3) | (0 << 2) | (2 << 0));
 	}
+
+    if (state->cfg->use_pwm3)
+		dib3000mc_write_word(state, 245, (1 << 3) | (1 << 0));
+	else
+		dib3000mc_write_word(state, 245, 0);
+
+    dib3000mc_write_word(state, 1040, 0x3);
 	return 0;
 }
 
-static int dib3000mc_set_adp_cfg(struct dib3000_state *state, fe_modulation_t con)
+static int dib3000mc_set_output_mode(struct dib3000mc_state *state, int mode)
 {
-	switch (con) {
-		case QAM_64:
-			wr_foreach(dib3000mc_reg_adp_cfg,dib3000mc_adp_cfg[2]);
-			break;
-		case QAM_16:
-			wr_foreach(dib3000mc_reg_adp_cfg,dib3000mc_adp_cfg[1]);
-			break;
-		case QPSK:
-			wr_foreach(dib3000mc_reg_adp_cfg,dib3000mc_adp_cfg[0]);
+	int    ret = 0;
+	u16 fifo_threshold = 1792;
+	u16 outreg = 0;
+	u16 outmode = 0;
+	u16 elecout = 1;
+	u16 smo_reg = (0 << 6) | (0 << 5) | (0 << 4) | (0 << 3) | (1 << 1) | 0 ; //smo_mode = 1
+
+	dprintk("-I-  Setting output mode for demod %p to %d\n",
+			&state->demod, mode);
+
+	switch (mode) {
+		case OUTMODE_HIGH_Z:  // disable
+			elecout = 0;
+			break;
+		case OUTMODE_MPEG2_PAR_GATED_CLK:   // STBs with parallel gated clock
+			outmode = 0;
+			break;
+		case OUTMODE_MPEG2_PAR_CONT_CLK:    // STBs with parallel continues clock
+			outmode = 1;
+			break;
+		case OUTMODE_MPEG2_SERIAL:          // STBs with serial input
+			outmode = 2;
+			break;
+		case OUTMODE_MPEG2_FIFO:            // e.g. USB feeding
+			elecout = 3;
+			/*ADDR @ 206 :
+			P_smo_error_discard  [1;6:6] = 0
+			P_smo_rs_discard     [1;5:5] = 0
+			P_smo_pid_parse      [1;4:4] = 0
+			P_smo_fifo_flush     [1;3:3] = 0
+			P_smo_mode           [2;2:1] = 11
+			P_smo_ovf_prot       [1;0:0] = 0
+			*/
+			smo_reg = (0 << 6) | (0 << 5) | (0 << 4) | (0 << 3) |(3 << 1) | 0;
+			fifo_threshold = 512;
+			outmode = 5;
 			break;
-		case QAM_AUTO:
+		case OUTMODE_DIVERSITY:
+			outmode = 4;
+			elecout = 1;
 			break;
 		default:
-			warn("unkown constellation.");
+			dprintk("Unhandled output_mode passed to be set for demod %p\n",&state->demod);
+			outmode = 0;
 			break;
 	}
-	return 0;
+
+	if ((state->cfg->output_mpeg2_in_188_bytes))
+		smo_reg |= (1 << 5) ; //P_smo_rs_discard     [1;5:5] = 1
+
+	outreg = dib3000mc_read_word(state, 244) & 0x07FF;
+	outreg |= (outmode << 11);
+	ret |= dib3000mc_write_word(state,  244, outreg);
+	ret |= dib3000mc_write_word(state,  206, smo_reg);   /*smo_ mode*/
+	ret |= dib3000mc_write_word(state,  207, fifo_threshold); /* synchronous fread */
+	ret |= dib3000mc_write_word(state, 1040, elecout);         /* P_out_cfg */
+	return ret;
 }
 
-static int dib3000mc_set_general_cfg(struct dib3000_state *state, struct dvb_frontend_parameters *fep, int *auto_val)
+static int dib3000mc_set_bandwidth(struct dvb_frontend *demod, u8 bw)
 {
-	struct dvb_ofdm_parameters *ofdm = &fep->u.ofdm;
-	fe_code_rate_t fe_cr = FEC_NONE;
-	u8 fft=0, guard=0, qam=0, alpha=0, sel_hp=0, cr=0, hrch=0;
-	int seq;
+	struct dib3000mc_state *state = demod->demodulator_priv;
+	u16 bw_cfg[6] = { 0 };
+	u16 imp_bw_cfg[3] = { 0 };
+	u16 reg;
 
-	switch (ofdm->transmission_mode) {
-		case TRANSMISSION_MODE_2K: fft = DIB3000_TRANSMISSION_MODE_2K; break;
-		case TRANSMISSION_MODE_8K: fft = DIB3000_TRANSMISSION_MODE_8K; break;
-		case TRANSMISSION_MODE_AUTO: break;
-		default: return -EINVAL;
-	}
-	switch (ofdm->guard_interval) {
-		case GUARD_INTERVAL_1_32: guard = DIB3000_GUARD_TIME_1_32; break;
-		case GUARD_INTERVAL_1_16: guard = DIB3000_GUARD_TIME_1_16; break;
-		case GUARD_INTERVAL_1_8:  guard = DIB3000_GUARD_TIME_1_8; break;
-		case GUARD_INTERVAL_1_4:  guard = DIB3000_GUARD_TIME_1_4; break;
-		case GUARD_INTERVAL_AUTO: break;
-		default: return -EINVAL;
-	}
-	switch (ofdm->constellation) {
-		case QPSK:   qam = DIB3000_CONSTELLATION_QPSK; break;
-		case QAM_16: qam = DIB3000_CONSTELLATION_16QAM; break;
-		case QAM_64: qam = DIB3000_CONSTELLATION_64QAM; break;
-		case QAM_AUTO: break;
-		default: return -EINVAL;
-	}
-	switch (ofdm->hierarchy_information) {
-		case HIERARCHY_NONE: /* fall through */
-		case HIERARCHY_1: alpha = DIB3000_ALPHA_1; break;
-		case HIERARCHY_2: alpha = DIB3000_ALPHA_2; break;
-		case HIERARCHY_4: alpha = DIB3000_ALPHA_4; break;
-		case HIERARCHY_AUTO: break;
-		default: return -EINVAL;
-	}
-	if (ofdm->hierarchy_information == HIERARCHY_NONE) {
-		hrch   = DIB3000_HRCH_OFF;
-		sel_hp = DIB3000_SELECT_HP;
-		fe_cr  = ofdm->code_rate_HP;
-	} else if (ofdm->hierarchy_information != HIERARCHY_AUTO) {
-		hrch   = DIB3000_HRCH_ON;
-		sel_hp = DIB3000_SELECT_LP;
-		fe_cr  = ofdm->code_rate_LP;
-	}
-	switch (fe_cr) {
-		case FEC_1_2: cr = DIB3000_FEC_1_2; break;
-		case FEC_2_3: cr = DIB3000_FEC_2_3; break;
-		case FEC_3_4: cr = DIB3000_FEC_3_4; break;
-		case FEC_5_6: cr = DIB3000_FEC_5_6; break;
-		case FEC_7_8: cr = DIB3000_FEC_7_8; break;
-		case FEC_NONE: break;
-		case FEC_AUTO: break;
-		default: return -EINVAL;
-	}
+/* settings here are for 27.7MHz */
+	switch (bw) {
+		case BANDWIDTH_8_MHZ:
+			bw_cfg[0] = 0x0019; bw_cfg[1] = 0x5c30; bw_cfg[2] = 0x0054; bw_cfg[3] = 0x88a0; bw_cfg[4] = 0x01a6; bw_cfg[5] = 0xab20;
+			imp_bw_cfg[0] = 0x04db; imp_bw_cfg[1] = 0x00db; imp_bw_cfg[2] = 0x00b7;
+			break;
 
-	wr(DIB3000MC_REG_DEMOD_PARM,DIB3000MC_DEMOD_PARM(alpha,qam,guard,fft));
-	wr(DIB3000MC_REG_HRCH_PARM,DIB3000MC_HRCH_PARM(sel_hp,cr,hrch));
+		case BANDWIDTH_7_MHZ:
+			bw_cfg[0] = 0x001c; bw_cfg[1] = 0xfba5; bw_cfg[2] = 0x0060; bw_cfg[3] = 0x9c25; bw_cfg[4] = 0x01e3; bw_cfg[5] = 0x0cb7;
+			imp_bw_cfg[0] = 0x04c0; imp_bw_cfg[1] = 0x00c0; imp_bw_cfg[2] = 0x00a0;
+			break;
 
-	switch (fep->inversion) {
-		case INVERSION_OFF:
-			wr(DIB3000MC_REG_SET_DDS_FREQ_MSB,DIB3000MC_DDS_FREQ_MSB_INV_OFF);
+		case BANDWIDTH_6_MHZ:
+			bw_cfg[0] = 0x0021; bw_cfg[1] = 0xd040; bw_cfg[2] = 0x0070; bw_cfg[3] = 0xb62b; bw_cfg[4] = 0x0233; bw_cfg[5] = 0x8ed5;
+			imp_bw_cfg[0] = 0x04a5; imp_bw_cfg[1] = 0x00a5; imp_bw_cfg[2] = 0x0089;
 			break;
-		case INVERSION_AUTO: /* fall through */
-		case INVERSION_ON:
-			wr(DIB3000MC_REG_SET_DDS_FREQ_MSB,DIB3000MC_DDS_FREQ_MSB_INV_ON);
+
+		case 255 /* BANDWIDTH_5_MHZ */:
+			bw_cfg[0] = 0x0028; bw_cfg[1] = 0x9380; bw_cfg[2] = 0x0087; bw_cfg[3] = 0x4100; bw_cfg[4] = 0x02a4; bw_cfg[5] = 0x4500;
+			imp_bw_cfg[0] = 0x0489; imp_bw_cfg[1] = 0x0089; imp_bw_cfg[2] = 0x0072;
 			break;
-		default:
-			return -EINVAL;
+
+		default: return -EINVAL;
 	}
 
-	seq = dib3000_seq
-		[ofdm->transmission_mode == TRANSMISSION_MODE_AUTO]
-		[ofdm->guard_interval == GUARD_INTERVAL_AUTO]
-		[fep->inversion == INVERSION_AUTO];
-
-	deb_setf("seq? %d\n", seq);
-	wr(DIB3000MC_REG_SEQ_TPS,DIB3000MC_SEQ_TPS(seq,1));
-	*auto_val = ofdm->constellation == QAM_AUTO ||
-			ofdm->hierarchy_information == HIERARCHY_AUTO ||
-			ofdm->guard_interval == GUARD_INTERVAL_AUTO ||
-			ofdm->transmission_mode == TRANSMISSION_MODE_AUTO ||
-			fe_cr == FEC_AUTO ||
-			fep->inversion == INVERSION_AUTO;
+	for (reg = 6; reg < 12; reg++)
+		dib3000mc_write_word(state, reg, bw_cfg[reg - 6]);
+	dib3000mc_write_word(state, 12, 0x0000);
+	dib3000mc_write_word(state, 13, 0x03e8);
+	dib3000mc_write_word(state, 14, 0x0000);
+	dib3000mc_write_word(state, 15, 0x03f2);
+	dib3000mc_write_word(state, 16, 0x0001);
+	dib3000mc_write_word(state, 17, 0xb0d0);
+	// P_sec_len
+	dib3000mc_write_word(state, 18, 0x0393);
+	dib3000mc_write_word(state, 19, 0x8700);
+
+	for (reg = 55; reg < 58; reg++)
+		dib3000mc_write_word(state, reg, imp_bw_cfg[reg - 55]);
+
+	// Timing configuration
+	dib3000mc_set_timing(state, 0, bw, 0);
+
 	return 0;
 }
 
-static int dib3000mc_get_frontend(struct dvb_frontend* fe,
-				  struct dvb_frontend_parameters *fep)
+static u16 impulse_noise_val[29] =
+
 {
-	struct dib3000_state* state = fe->demodulator_priv;
-	struct dvb_ofdm_parameters *ofdm = &fep->u.ofdm;
-	fe_code_rate_t *cr;
-	u16 tps_val,cr_val;
-	int inv_test1,inv_test2;
-	u32 dds_val, threshold = 0x1000000;
+	0x38, 0x6d9, 0x3f28, 0x7a7, 0x3a74, 0x196, 0x32a, 0x48c, 0x3ffe, 0x7f3,
+	0x2d94, 0x76, 0x53d, 0x3ff8, 0x7e3, 0x3320, 0x76, 0x5b3, 0x3feb, 0x7d2,
+	0x365e, 0x76, 0x48c, 0x3ffe, 0x5b3, 0x3feb, 0x76, 0x0000, 0xd
+};
 
-	if (!(rd(DIB3000MC_REG_LOCK_507) & DIB3000MC_LOCK_507))
-		return 0;
+static void dib3000mc_set_impulse_noise(struct dib3000mc_state *state, u8 mode, s16 nfft)
+{
+	u16 i;
+	for (i = 58; i < 87; i++)
+		dib3000mc_write_word(state, i, impulse_noise_val[i-58]);
 
-	dds_val = (rd(DIB3000MC_REG_DDS_FREQ_MSB) << 16) + rd(DIB3000MC_REG_DDS_FREQ_LSB);
-	deb_getf("DDS_FREQ: %6x\n",dds_val);
-	if (dds_val < threshold)
-		inv_test1 = 0;
-	else if (dds_val == threshold)
-		inv_test1 = 1;
-	else
-		inv_test1 = 2;
-
-	dds_val = (rd(DIB3000MC_REG_SET_DDS_FREQ_MSB) << 16) + rd(DIB3000MC_REG_SET_DDS_FREQ_LSB);
-	deb_getf("DDS_SET_FREQ: %6x\n",dds_val);
-	if (dds_val < threshold)
-		inv_test2 = 0;
-	else if (dds_val == threshold)
-		inv_test2 = 1;
+	if (nfft == 1) {
+		dib3000mc_write_word(state, 58, 0x3b);
+		dib3000mc_write_word(state, 84, 0x00);
+		dib3000mc_write_word(state, 85, 0x8200);
+	}
+
+	dib3000mc_write_word(state, 34, 0x1294);
+	dib3000mc_write_word(state, 35, 0x1ff8);
+	if (mode == 1)
+		dib3000mc_write_word(state, 55, dib3000mc_read_word(state, 55) | (1 << 10));
+}
+
+static int dib3000mc_init(struct dvb_frontend *demod)
+{
+	struct dib3000mc_state *state = demod->demodulator_priv;
+	struct dibx000_agc_config *agc = state->cfg->agc;
+
+	// Restart Configuration
+	dib3000mc_write_word(state, 1027, 0x8000);
+	dib3000mc_write_word(state, 1027, 0x0000);
+
+	// power up the demod + mobility configuration
+	dib3000mc_write_word(state, 140, 0x0000);
+	dib3000mc_write_word(state, 1031, 0);
+
+	if (state->cfg->mobile_mode) {
+		dib3000mc_write_word(state, 139,  0x0000);
+		dib3000mc_write_word(state, 141,  0x0000);
+		dib3000mc_write_word(state, 175,  0x0002);
+		dib3000mc_write_word(state, 1032, 0x0000);
+	} else {
+		dib3000mc_write_word(state, 139,  0x0001);
+		dib3000mc_write_word(state, 141,  0x0000);
+		dib3000mc_write_word(state, 175,  0x0000);
+		dib3000mc_write_word(state, 1032, 0x012C);
+	}
+	dib3000mc_write_word(state, 1033, 0);
+
+	// P_clk_cfg
+	dib3000mc_write_word(state, 1037, 12592);
+
+	// other configurations
+
+	// P_ctrl_sfreq
+	dib3000mc_write_word(state, 33, (5 << 0));
+	dib3000mc_write_word(state, 88, (1 << 10) | (0x10 << 0));
+
+	// Phase noise control
+	// P_fft_phacor_inh, P_fft_phacor_cpe, P_fft_powrange
+	dib3000mc_write_word(state, 99, (1 << 9) | (0x20 << 0));
+
+	if (state->cfg->phase_noise_mode == 0)
+		dib3000mc_write_word(state, 111, 0x00);
 	else
-		inv_test2 = 2;
+		dib3000mc_write_word(state, 111, 0x02);
+
+	// P_agc_global
+	dib3000mc_write_word(state, 50, 0x8000);
+
+	// agc setup misc
+	dib3000mc_setup_pwm3_state(state);
+
+	// P_agc_counter_lock
+	dib3000mc_write_word(state, 53, 0x87);
+	// P_agc_counter_unlock
+	dib3000mc_write_word(state, 54, 0x87);
+
+	/* agc */
+	dib3000mc_write_word(state, 36, state->cfg->max_time);
+	dib3000mc_write_word(state, 37, agc->setup);
+	dib3000mc_write_word(state, 38, state->cfg->pwm3_value);
+	dib3000mc_write_word(state, 39, state->cfg->ln_adc_level);
+
+	// set_agc_loop_Bw
+	dib3000mc_write_word(state, 40, 0x0179);
+	dib3000mc_write_word(state, 41, 0x03f0);
+
+	dib3000mc_write_word(state, 42, agc->agc1_max);
+	dib3000mc_write_word(state, 43, agc->agc1_min);
+	dib3000mc_write_word(state, 44, agc->agc2_max);
+	dib3000mc_write_word(state, 45, agc->agc2_min);
+	dib3000mc_write_word(state, 46, (agc->agc1_pt1 << 8) | agc->agc1_pt2);
+	dib3000mc_write_word(state, 47, (agc->agc1_slope1 << 8) | agc->agc1_slope2);
+	dib3000mc_write_word(state, 48, (agc->agc2_pt1 << 8) | agc->agc2_pt2);
+	dib3000mc_write_word(state, 49, (agc->agc2_slope1 << 8) | agc->agc2_slope2);
+
+// Begin: TimeOut registers
+	// P_pha3_thres
+	dib3000mc_write_word(state, 110, 3277);
+	// P_timf_alpha = 6, P_corm_alpha = 6, P_corm_thres = 0x80
+	dib3000mc_write_word(state,  26, 0x6680);
+	// lock_mask0
+	dib3000mc_write_word(state, 1, 4);
+	// lock_mask1
+	dib3000mc_write_word(state, 2, 4);
+	// lock_mask2
+	dib3000mc_write_word(state, 3, 0x1000);
+	// P_search_maxtrial=1
+	dib3000mc_write_word(state, 5, 1);
+
+	dib3000mc_set_bandwidth(&state->demod, BANDWIDTH_8_MHZ);
+
+	// div_lock_mask
+	dib3000mc_write_word(state,  4, 0x814);
+
+	dib3000mc_write_word(state, 21, (1 << 9) | 0x164);
+	dib3000mc_write_word(state, 22, 0x463d);
+
+	// Spurious rm cfg
+	// P_cspu_regul, P_cspu_win_cut
+	dib3000mc_write_word(state, 120, 0x200f);
+	// P_adp_selec_monit
+	dib3000mc_write_word(state, 134, 0);
+
+	// Fec cfg
+	dib3000mc_write_word(state, 195, 0x10);
+
+	// diversity register: P_dvsy_sync_wait..
+	dib3000mc_write_word(state, 180, 0x2FF0);
+
+	// Impulse noise configuration
+	dib3000mc_set_impulse_noise(state, 0, 1);
+
+	// output mode set-up
+	dib3000mc_set_output_mode(state, OUTMODE_HIGH_Z);
+
+	/* close the i2c-gate */
+	dib3000mc_write_word(state, 769, (1 << 7) );
 
-	fep->inversion =
-		((inv_test2 == 2) && (inv_test1==1 || inv_test1==0)) ||
-		((inv_test2 == 0) && (inv_test1==1 || inv_test1==2)) ?
-		INVERSION_ON : INVERSION_OFF;
+	return 0;
+}
 
-	deb_getf("inversion %d %d, %d\n", inv_test2, inv_test1, fep->inversion);
+static int dib3000mc_sleep(struct dvb_frontend *demod)
+{
+	struct dib3000mc_state *state = demod->demodulator_priv;
 
-	fep->frequency = state->last_tuned_freq;
-	fep->u.ofdm.bandwidth= state->last_tuned_bw;
+	dib3000mc_write_word(state, 1037, dib3000mc_read_word(state, 1037) | 0x0003);
+	dib3000mc_write_word(state, 1031, 0xFFFF);
+	dib3000mc_write_word(state, 1032, 0xFFFF);
+	dib3000mc_write_word(state, 1033, 0xFFF4);   // ****  Bin2
 
-	tps_val = rd(DIB3000MC_REG_TUNING_PARM);
+    return 0;
+}
 
-	switch (DIB3000MC_TP_QAM(tps_val)) {
-		case DIB3000_CONSTELLATION_QPSK:
-			deb_getf("QPSK ");
-			ofdm->constellation = QPSK;
+static void dib3000mc_set_adp_cfg(struct dib3000mc_state *state, s16 qam)
+{
+	u16 cfg[4] = { 0 },reg;
+	switch (qam) {
+		case 0:
+			cfg[0] = 0x099a; cfg[1] = 0x7fae; cfg[2] = 0x0333; cfg[3] = 0x7ff0;
 			break;
-		case DIB3000_CONSTELLATION_16QAM:
-			deb_getf("QAM16 ");
-			ofdm->constellation = QAM_16;
+		case 1:
+			cfg[0] = 0x023d; cfg[1] = 0x7fdf; cfg[2] = 0x00a4; cfg[3] = 0x7ff0;
 			break;
-		case DIB3000_CONSTELLATION_64QAM:
-			deb_getf("QAM64 ");
-			ofdm->constellation = QAM_64;
-			break;
-		default:
-			err("Unexpected constellation returned by TPS (%d)", tps_val);
+		case 2:
+			cfg[0] = 0x0148; cfg[1] = 0x7ff0; cfg[2] = 0x00a4; cfg[3] = 0x7ff8;
 			break;
 	}
+	for (reg = 129; reg < 133; reg++)
+		dib3000mc_write_word(state, reg, cfg[reg - 129]);
+}
 
-	if (DIB3000MC_TP_HRCH(tps_val)) {
-		deb_getf("HRCH ON ");
-		cr = &ofdm->code_rate_LP;
-		ofdm->code_rate_HP = FEC_NONE;
-		switch (DIB3000MC_TP_ALPHA(tps_val)) {
-			case DIB3000_ALPHA_0:
-				deb_getf("HIERARCHY_NONE ");
-				ofdm->hierarchy_information = HIERARCHY_NONE;
-				break;
-			case DIB3000_ALPHA_1:
-				deb_getf("HIERARCHY_1 ");
-				ofdm->hierarchy_information = HIERARCHY_1;
-				break;
-			case DIB3000_ALPHA_2:
-				deb_getf("HIERARCHY_2 ");
-				ofdm->hierarchy_information = HIERARCHY_2;
-				break;
-			case DIB3000_ALPHA_4:
-				deb_getf("HIERARCHY_4 ");
-				ofdm->hierarchy_information = HIERARCHY_4;
-				break;
-			default:
-				err("Unexpected ALPHA value returned by TPS (%d)", tps_val);
-				break;
-		}
-		cr_val = DIB3000MC_TP_FEC_CR_LP(tps_val);
-	} else {
-		deb_getf("HRCH OFF ");
-		cr = &ofdm->code_rate_HP;
-		ofdm->code_rate_LP = FEC_NONE;
-		ofdm->hierarchy_information = HIERARCHY_NONE;
-		cr_val = DIB3000MC_TP_FEC_CR_HP(tps_val);
-	}
+static void dib3000mc_set_channel_cfg(struct dib3000mc_state *state, struct dibx000_ofdm_channel *chan, u16 seq)
+{
+	u16 tmp;
 
-	switch (cr_val) {
-		case DIB3000_FEC_1_2:
-			deb_getf("FEC_1_2 ");
-			*cr = FEC_1_2;
-			break;
-		case DIB3000_FEC_2_3:
-			deb_getf("FEC_2_3 ");
-			*cr = FEC_2_3;
-			break;
-		case DIB3000_FEC_3_4:
-			deb_getf("FEC_3_4 ");
-			*cr = FEC_3_4;
-			break;
-		case DIB3000_FEC_5_6:
-			deb_getf("FEC_5_6 ");
-			*cr = FEC_4_5;
-			break;
-		case DIB3000_FEC_7_8:
-			deb_getf("FEC_7_8 ");
-			*cr = FEC_7_8;
-			break;
-		default:
-			err("Unexpected FEC returned by TPS (%d)", tps_val);
-			break;
-	}
+	dib3000mc_set_timing(state, chan->nfft, chan->Bw, 0);
 
-	switch (DIB3000MC_TP_GUARD(tps_val)) {
-		case DIB3000_GUARD_TIME_1_32:
-			deb_getf("GUARD_INTERVAL_1_32 ");
-			ofdm->guard_interval = GUARD_INTERVAL_1_32;
-			break;
-		case DIB3000_GUARD_TIME_1_16:
-			deb_getf("GUARD_INTERVAL_1_16 ");
-			ofdm->guard_interval = GUARD_INTERVAL_1_16;
-			break;
-		case DIB3000_GUARD_TIME_1_8:
-			deb_getf("GUARD_INTERVAL_1_8 ");
-			ofdm->guard_interval = GUARD_INTERVAL_1_8;
-			break;
-		case DIB3000_GUARD_TIME_1_4:
-			deb_getf("GUARD_INTERVAL_1_4 ");
-			ofdm->guard_interval = GUARD_INTERVAL_1_4;
-			break;
-		default:
-			err("Unexpected Guard Time returned by TPS (%d)", tps_val);
-			break;
-	}
+//	if (boost)
+//		dib3000mc_write_word(state, 100, (11 << 6) + 6);
+//	else
+		dib3000mc_write_word(state, 100, (16 << 6) + 9);
 
-	switch (DIB3000MC_TP_FFT(tps_val)) {
-		case DIB3000_TRANSMISSION_MODE_2K:
-			deb_getf("TRANSMISSION_MODE_2K ");
-			ofdm->transmission_mode = TRANSMISSION_MODE_2K;
-			break;
-		case DIB3000_TRANSMISSION_MODE_8K:
-			deb_getf("TRANSMISSION_MODE_8K ");
-			ofdm->transmission_mode = TRANSMISSION_MODE_8K;
-			break;
-		default:
-			err("unexpected transmission mode return by TPS (%d)", tps_val);
-			break;
-	}
-	deb_getf("\n");
+	dib3000mc_write_word(state, 1027, 0x0800);
+	dib3000mc_write_word(state, 1027, 0x0000);
+
+	//Default cfg isi offset adp
+	dib3000mc_write_word(state, 26,  0x6680);
+	dib3000mc_write_word(state, 29,  0x1273);
+	dib3000mc_write_word(state, 33,       5);
+	dib3000mc_set_adp_cfg(state, 1);
+	dib3000mc_write_word(state, 133,  15564);
+
+	dib3000mc_write_word(state, 12 , 0x0);
+	dib3000mc_write_word(state, 13 , 0x3e8);
+	dib3000mc_write_word(state, 14 , 0x0);
+	dib3000mc_write_word(state, 15 , 0x3f2);
+
+	dib3000mc_write_word(state, 93,0);
+	dib3000mc_write_word(state, 94,0);
+	dib3000mc_write_word(state, 95,0);
+	dib3000mc_write_word(state, 96,0);
+	dib3000mc_write_word(state, 97,0);
+	dib3000mc_write_word(state, 98,0);
+
+	dib3000mc_set_impulse_noise(state, 0, chan->nfft);
+
+	tmp = ((chan->nfft & 0x1) << 7) | (chan->guard << 5) | (chan->nqam << 3) | chan->vit_alpha;
+	dib3000mc_write_word(state, 0, tmp);
+
+	dib3000mc_write_word(state, 5, seq);
+
+	tmp = (chan->vit_hrch << 4) | (chan->vit_select_hp);
+	if (!chan->vit_hrch || (chan->vit_hrch && chan->vit_select_hp))
+		tmp |= chan->vit_code_rate_hp << 1;
+	else
+		tmp |= chan->vit_code_rate_lp << 1;
+	dib3000mc_write_word(state, 181, tmp);
+
+	// diversity synchro delay
+	tmp = dib3000mc_read_word(state, 180) & 0x000f;
+	tmp |= ((chan->nfft == 0) ? 64 : 256) * ((1 << (chan->guard)) * 3 / 2) << 4; // add 50% SFN margin
+	dib3000mc_write_word(state, 180, tmp);
+
+	// restart demod
+	tmp = dib3000mc_read_word(state, 0);
+	dib3000mc_write_word(state, 0, tmp | (1 << 9));
+	dib3000mc_write_word(state, 0, tmp);
+
+	msleep(30);
+
+	dib3000mc_set_impulse_noise(state, state->cfg->impulse_noise_mode, chan->nfft);
+}
+
+static int dib3000mc_autosearch_start(struct dvb_frontend *demod, struct dibx000_ofdm_channel *chan)
+{
+	struct dib3000mc_state *state = demod->demodulator_priv;
+	u16 reg;
+//	u32 val;
+	struct dibx000_ofdm_channel fchan;
+
+	INIT_OFDM_CHANNEL(&fchan);
+	fchan = *chan;
+
+
+	/* a channel for autosearch */
+	reg = 0;
+	if (chan->nfft == -1 && chan->guard == -1) reg = 7;
+	if (chan->nfft == -1 && chan->guard != -1) reg = 2;
+	if (chan->nfft != -1 && chan->guard == -1) reg = 3;
+
+	fchan.nfft = 1; fchan.guard = 0; fchan.nqam = 2;
+	fchan.vit_alpha = 1; fchan.vit_code_rate_hp = 2; fchan.vit_code_rate_lp = 2;
+	fchan.vit_hrch = 0; fchan.vit_select_hp = 1;
+
+	dib3000mc_set_channel_cfg(state, &fchan, reg);
+
+	reg = dib3000mc_read_word(state, 0);
+	dib3000mc_write_word(state, 0, reg | (1 << 8));
+	dib3000mc_write_word(state, 0, reg);
 
 	return 0;
 }
 
-static int dib3000mc_set_frontend(struct dvb_frontend* fe,
-				  struct dvb_frontend_parameters *fep, int tuner)
+static int dib3000mc_autosearch_is_irq(struct dvb_frontend *demod)
 {
-	struct dib3000_state* state = fe->demodulator_priv;
-	struct dvb_ofdm_parameters *ofdm = &fep->u.ofdm;
-	int search_state,auto_val;
-	u16 val;
+	struct dib3000mc_state *state = demod->demodulator_priv;
+	u16 irq_pending = dib3000mc_read_word(state, 511);
+
+	if (irq_pending & 0x1) // failed
+		return 1;
 
-	if (tuner && state->config.pll_set) { /* initial call from dvb */
-		state->config.pll_set(fe,fep);
+	if (irq_pending & 0x2) // succeeded
+		return 2;
+
+	return 0; // still pending
+}
 
-		state->last_tuned_freq = fep->frequency;
-	//	if (!scanboost) {
-			dib3000mc_set_timing(state,0,ofdm->transmission_mode,ofdm->bandwidth);
-			dib3000mc_init_auto_scan(state, ofdm->bandwidth, 0);
-			state->last_tuned_bw = ofdm->bandwidth;
+static int dib3000mc_tune(struct dvb_frontend *demod, struct dibx000_ofdm_channel *ch)
+{
+	struct dib3000mc_state *state = demod->demodulator_priv;
 
-			wr_foreach(dib3000mc_reg_agc_bandwidth,dib3000mc_agc_bandwidth);
-			wr(DIB3000MC_REG_RESTART,DIB3000MC_RESTART_AGC);
-			wr(DIB3000MC_REG_RESTART,DIB3000MC_RESTART_OFF);
+	// ** configure demod **
+	dib3000mc_set_channel_cfg(state, ch, 0);
 
-			/* Default cfg isi offset adp */
-			wr_foreach(dib3000mc_reg_offset,dib3000mc_offset[0]);
+	// activates isi
+	dib3000mc_write_word(state, 29, 0x1073);
 
-			wr(DIB3000MC_REG_ISI,DIB3000MC_ISI_DEFAULT | DIB3000MC_ISI_INHIBIT);
-			dib3000mc_set_adp_cfg(state,ofdm->constellation);
-			wr(DIB3000MC_REG_UNK_133,DIB3000MC_UNK_133);
+	dib3000mc_set_adp_cfg(state, (u8)ch->nqam);
 
-			wr_foreach(dib3000mc_reg_bandwidth_general,dib3000mc_bandwidth_general);
-			/* power smoothing */
-			if (ofdm->bandwidth != BANDWIDTH_8_MHZ) {
-				wr_foreach(dib3000mc_reg_bw,dib3000mc_bw[0]);
+	if (ch->nfft == 1) {
+		dib3000mc_write_word(state, 26, 38528);
+		dib3000mc_write_word(state, 33, 8);
 	} else {
-				wr_foreach(dib3000mc_reg_bw,dib3000mc_bw[3]);
+		dib3000mc_write_word(state, 26, 30336);
+		dib3000mc_write_word(state, 33, 6);
 	}
-			auto_val = 0;
-			dib3000mc_set_general_cfg(state,fep,&auto_val);
-			dib3000mc_set_impulse_noise(state,0,ofdm->constellation,ofdm->bandwidth);
 
-			val = rd(DIB3000MC_REG_DEMOD_PARM);
-			wr(DIB3000MC_REG_DEMOD_PARM,val|DIB3000MC_DEMOD_RST_DEMOD_ON);
-			wr(DIB3000MC_REG_DEMOD_PARM,val);
-	//	}
-		msleep(70);
+	// if (lock)
+	//	dib3000mc_set_timing(state, ch->nfft, ch->Bw, 1);
 
-		/* something has to be auto searched */
-		if (auto_val) {
-			int as_count=0;
+	return 0;
+}
 
-			deb_setf("autosearch enabled.\n");
+static int dib3000mc_demod_output_mode(struct dvb_frontend *demod, int mode)
+{
+	struct dib3000mc_state *state = demod->demodulator_priv;
+	return dib3000mc_set_output_mode(state, mode);
+}
 
-			val = rd(DIB3000MC_REG_DEMOD_PARM);
-			wr(DIB3000MC_REG_DEMOD_PARM,val | DIB3000MC_DEMOD_RST_AUTO_SRCH_ON);
-			wr(DIB3000MC_REG_DEMOD_PARM,val);
+static int dib3000mc_i2c_enumeration(struct dvb_frontend *demod[], int no_of_demods, u8 default_addr)
+{
+	struct dib3000mc_state *st;
+	int k,ret=0;
+	u8 new_addr;
+
+	static u8 DIB3000MC_I2C_ADDRESS[] = {20,22,24,26};
 
-			while ((search_state = dib3000_search_status(
-						rd(DIB3000MC_REG_AS_IRQ),1)) < 0 && as_count++ < 100)
-				msleep(10);
+	for (k = no_of_demods-1; k >= 0; k--) {
+		st = demod[k]->demodulator_priv;
 
-			deb_info("search_state after autosearch %d after %d checks\n",search_state,as_count);
+		/* designated i2c address */
+		new_addr          = DIB3000MC_I2C_ADDRESS[k];
 
-			if (search_state == 1) {
-				struct dvb_frontend_parameters feps;
-				if (dib3000mc_get_frontend(fe, &feps) == 0) {
-					deb_setf("reading tuning data from frontend succeeded.\n");
-					return dib3000mc_set_frontend(fe, &feps, 0);
+		st->i2c_addr = new_addr;
+		if (dib3000mc_identify(st) != 0) {
+			st->i2c_addr = default_addr;
+			if (dib3000mc_identify(st) != 0) {
+				dprintk("-E-  DiB3000P/MC #%d: not identified\n", k);
+				return -EINVAL;
 			}
 		}
-		} else {
-			dib3000mc_set_impulse_noise(state,0,ofdm->transmission_mode,ofdm->bandwidth);
-			wr(DIB3000MC_REG_ISI,DIB3000MC_ISI_DEFAULT|DIB3000MC_ISI_ACTIVATE);
-			dib3000mc_set_adp_cfg(state,ofdm->constellation);
 
-			/* set_offset_cfg */
-			wr_foreach(dib3000mc_reg_offset,
-					dib3000mc_offset[(ofdm->transmission_mode == TRANSMISSION_MODE_8K)+1]);
-		}
-	} else { /* second call, after autosearch (fka: set_WithKnownParams) */
-//		dib3000mc_set_timing(state,1,ofdm->transmission_mode,ofdm->bandwidth);
+		/* turn on div_out */
+		dib3000mc_demod_output_mode(demod[k], OUTMODE_MPEG2_PAR_CONT_CLK);
 
-		auto_val = 0;
-		dib3000mc_set_general_cfg(state,fep,&auto_val);
-		if (auto_val)
-			deb_info("auto_val is true, even though an auto search was already performed.\n");
+		// set new i2c address and force divstr (Bit 1) to value 0 (Bit 0)
+		ret |= dib3000mc_write_word(st, 1024, (new_addr << 3) | 0x1);
+		st->i2c_addr = new_addr;
+	}
 
-		dib3000mc_set_impulse_noise(state,0,ofdm->constellation,ofdm->bandwidth);
+	for (k = 0; k < no_of_demods; k++) {
+		st = demod[k]->demodulator_priv;
 
-		val = rd(DIB3000MC_REG_DEMOD_PARM);
-		wr(DIB3000MC_REG_DEMOD_PARM,val | DIB3000MC_DEMOD_RST_AUTO_SRCH_ON);
-		wr(DIB3000MC_REG_DEMOD_PARM,val);
+		ret |= dib3000mc_write_word(st, 1024, st->i2c_addr << 3);
 
-		msleep(30);
+		/* turn off data output */
+		dib3000mc_demod_output_mode(demod[k],OUTMODE_HIGH_Z);
+		dib3000mc_write_word(st, 769, (1 << 7) );
 
-		wr(DIB3000MC_REG_ISI,DIB3000MC_ISI_DEFAULT|DIB3000MC_ISI_ACTIVATE);
-			dib3000mc_set_adp_cfg(state,ofdm->constellation);
-		wr_foreach(dib3000mc_reg_offset,
-				dib3000mc_offset[(ofdm->transmission_mode == TRANSMISSION_MODE_8K)+1]);
 	}
 	return 0;
 }
 
-static int dib3000mc_fe_init(struct dvb_frontend* fe, int mobile_mode)
+struct i2c_adapter * dib3000mc_get_tuner_i2c_master(struct dvb_frontend *demod, int gating)
 {
-	struct dib3000_state *state = fe->demodulator_priv;
-	const struct dib3000p_agc_config *agc = state->config.agc;
-	deb_info("init start\n");
-
-	state->timing_offset = 0;
-	state->timing_offset_comp_done = 0;
-
-	wr(DIB3000MC_REG_RESTART,DIB3000MC_RESTART_CONFIG);
-	wr(DIB3000MC_REG_RESTART,DIB3000MC_RESTART_OFF);
-	wr(DIB3000MC_REG_CLK_CFG_1,DIB3000MC_CLK_CFG_1_POWER_UP);
-	wr(DIB3000MC_REG_CLK_CFG_2,DIB3000MC_CLK_CFG_2_PUP_MOBILE);
-	wr(DIB3000MC_REG_CLK_CFG_3,DIB3000MC_CLK_CFG_3_POWER_UP);
-	wr(DIB3000MC_REG_CLK_CFG_7,DIB3000MC_CLK_CFG_7_INIT);
-
-	wr(DIB3000MC_REG_RST_UNC,DIB3000MC_RST_UNC_OFF);
-	wr(DIB3000MC_REG_UNK_19,DIB3000MC_UNK_19);
+	struct dib3000mc_state *st = demod->demodulator_priv;
+	return dibx000_get_i2c_adapter(&st->i2c_master, DIBX000_I2C_INTERFACE_TUNER, gating);
+}
 
-	wr(33,5);
-	wr(36,81);
-	wr(DIB3000MC_REG_UNK_88,DIB3000MC_UNK_88);
+EXPORT_SYMBOL(dib3000mc_get_tuner_i2c_master);
 
-	wr(DIB3000MC_REG_UNK_99,DIB3000MC_UNK_99);
-	wr(DIB3000MC_REG_UNK_111,DIB3000MC_UNK_111_PH_N_MODE_0); /* phase noise algo off */
+static int dib3000mc_get_frontend(struct dvb_frontend* fe,
+				struct dvb_frontend_parameters *fep)
+{
+	struct dib3000mc_state *state = fe->demodulator_priv;
+	u16 tps = dib3000mc_read_word(state,458);
 
-	/* mobile mode - portable reception */
-	wr_foreach(dib3000mc_reg_mobile_mode,dib3000mc_mobile_mode[1]);
+	fep->inversion = INVERSION_AUTO;
 
-	/* AGC settings for all tuners */
-	wr_foreach(dib3000mc_reg_agc_bandwidth,dib3000mc_agc_bandwidth);
-	wr_foreach(dib3000mc_reg_agc_bandwidth_general,dib3000mc_agc_bandwidth_general);
+	fep->u.ofdm.bandwidth = state->current_bandwidth;
 
-	/* AGC setting - specific to the tuners */
-	wr(36, agc->val[0]);
-	wr(37, agc->val[1]);
-	wr(38, agc->val[2]);
-	wr(39, agc->val[3]);
+	switch ((tps >> 8) & 0x1) {
+		case 0: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_2K; break;
+		case 1: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_8K; break;
+	}
 
-	wr(42, agc->val[4]);
-	wr(43, agc->val[5]);
-	wr(44, agc->val[6]);
-	wr(45, agc->val[7]);
-	wr(46, agc->val[8]);
-	wr(47, agc->val[9]);
-	wr(48, agc->val[10]);
-	wr(49, agc->val[11]);
+	switch (tps & 0x3) {
+		case 0: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_32; break;
+		case 1: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_16; break;
+		case 2: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_8; break;
+		case 3: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_4; break;
+	}
 
-	wr(DIB3000MC_REG_UNK_110,DIB3000MC_UNK_110);
-	wr(26,0x6680);
-	wr(DIB3000MC_REG_UNK_1,DIB3000MC_UNK_1);
-	wr(DIB3000MC_REG_UNK_2,DIB3000MC_UNK_2);
-	wr(DIB3000MC_REG_UNK_3,DIB3000MC_UNK_3);
-	wr(DIB3000MC_REG_SEQ_TPS,DIB3000MC_SEQ_TPS_DEFAULT);
+	switch ((tps >> 13) & 0x3) {
+		case 0: fep->u.ofdm.constellation = QPSK; break;
+		case 1: fep->u.ofdm.constellation = QAM_16; break;
+		case 2:
+		default: fep->u.ofdm.constellation = QAM_64; break;
+	}
 
-	wr_foreach(dib3000mc_reg_bandwidth,dib3000mc_bandwidth_8mhz);
-	wr_foreach(dib3000mc_reg_bandwidth_general,dib3000mc_bandwidth_general);
+	/* as long as the frontend_param structure is fixed for hierarchical transmission I refuse to use it */
+	/* (tps >> 12) & 0x1 == hrch is used, (tps >> 9) & 0x7 == alpha */
 
-	wr(DIB3000MC_REG_UNK_4,DIB3000MC_UNK_4);
+	fep->u.ofdm.hierarchy_information = HIERARCHY_NONE;
+	switch ((tps >> 5) & 0x7) {
+		case 1: fep->u.ofdm.code_rate_HP = FEC_1_2; break;
+		case 2: fep->u.ofdm.code_rate_HP = FEC_2_3; break;
+		case 3: fep->u.ofdm.code_rate_HP = FEC_3_4; break;
+		case 5: fep->u.ofdm.code_rate_HP = FEC_5_6; break;
+		case 7:
+		default: fep->u.ofdm.code_rate_HP = FEC_7_8; break;
 
-	wr(DIB3000MC_REG_SET_DDS_FREQ_MSB,DIB3000MC_DDS_FREQ_MSB_INV_OFF);
-	wr(DIB3000MC_REG_SET_DDS_FREQ_LSB,DIB3000MC_DDS_FREQ_LSB);
+	}
 
-	dib3000mc_set_timing(state,0,TRANSMISSION_MODE_8K,BANDWIDTH_8_MHZ);
-//	wr_foreach(dib3000mc_reg_timing_freq,dib3000mc_timing_freq[3]);
+	switch ((tps >> 2) & 0x7) {
+		case 1: fep->u.ofdm.code_rate_LP = FEC_1_2; break;
+		case 2: fep->u.ofdm.code_rate_LP = FEC_2_3; break;
+		case 3: fep->u.ofdm.code_rate_LP = FEC_3_4; break;
+		case 5: fep->u.ofdm.code_rate_LP = FEC_5_6; break;
+		case 7:
+		default: fep->u.ofdm.code_rate_LP = FEC_7_8; break;
+	}
 
-	wr(DIB3000MC_REG_UNK_120,DIB3000MC_UNK_120);
-	wr(DIB3000MC_REG_UNK_134,DIB3000MC_UNK_134);
-	wr(DIB3000MC_REG_FEC_CFG,DIB3000MC_FEC_CFG);
+	return 0;
+}
 
-	wr(DIB3000MC_REG_DIVERSITY3,DIB3000MC_DIVERSITY3_IN_OFF);
+static int dib3000mc_set_frontend(struct dvb_frontend* fe,
+				struct dvb_frontend_parameters *fep)
+{
+	struct dib3000mc_state *state = fe->demodulator_priv;
+	struct dibx000_ofdm_channel ch;
 
-	dib3000mc_set_impulse_noise(state,0,TRANSMISSION_MODE_8K,BANDWIDTH_8_MHZ);
+	INIT_OFDM_CHANNEL(&ch);
+	FEP2DIB(fep,&ch);
 
-/* output mode control, just the MPEG2_SLAVE */
-//	set_or(DIB3000MC_REG_OUTMODE,DIB3000MC_OM_SLAVE);
-	wr(DIB3000MC_REG_OUTMODE,DIB3000MC_OM_SLAVE);
-	wr(DIB3000MC_REG_SMO_MODE,DIB3000MC_SMO_MODE_SLAVE);
-	wr(DIB3000MC_REG_FIFO_THRESHOLD,DIB3000MC_FIFO_THRESHOLD_SLAVE);
-	wr(DIB3000MC_REG_ELEC_OUT,DIB3000MC_ELEC_OUT_SLAVE);
+	dump_fep(&ch);
 
-/* MPEG2_PARALLEL_CONTINUOUS_CLOCK
-	wr(DIB3000MC_REG_OUTMODE,
-		DIB3000MC_SET_OUTMODE(DIB3000MC_OM_PAR_CONT_CLK,
-			rd(DIB3000MC_REG_OUTMODE)));
+	state->current_bandwidth = fep->u.ofdm.bandwidth;
+	dib3000mc_set_bandwidth(fe, fep->u.ofdm.bandwidth);
 
-	wr(DIB3000MC_REG_SMO_MODE,
-			DIB3000MC_SMO_MODE_DEFAULT |
-			DIB3000MC_SMO_MODE_188);
+	if (fe->ops.tuner_ops.set_params) {
+		fe->ops.tuner_ops.set_params(fe, fep);
+		msleep(100);
+	}
 
-	wr(DIB3000MC_REG_FIFO_THRESHOLD,DIB3000MC_FIFO_THRESHOLD_DEFAULT);
-	wr(DIB3000MC_REG_ELEC_OUT,DIB3000MC_ELEC_OUT_DIV_OUT_ON);
-*/
+	if (fep->u.ofdm.transmission_mode == TRANSMISSION_MODE_AUTO ||
+		fep->u.ofdm.guard_interval    == GUARD_INTERVAL_AUTO ||
+		fep->u.ofdm.constellation     == QAM_AUTO ||
+		fep->u.ofdm.code_rate_HP      == FEC_AUTO) {
+		int i = 100, found;
 
-/* diversity */
-	wr(DIB3000MC_REG_DIVERSITY1,DIB3000MC_DIVERSITY1_DEFAULT);
-	wr(DIB3000MC_REG_DIVERSITY2,DIB3000MC_DIVERSITY2_DEFAULT);
+		dib3000mc_autosearch_start(fe, &ch);
+		do {
+			msleep(1);
+			found = dib3000mc_autosearch_is_irq(fe);
+		} while (found == 0 && i--);
 
-	set_and(DIB3000MC_REG_DIVERSITY3,DIB3000MC_DIVERSITY3_IN_OFF);
+		dprintk("autosearch returns: %d\n",found);
+		if (found == 0 || found == 1)
+			return 0; // no channel found
 
-	set_or(DIB3000MC_REG_CLK_CFG_7,DIB3000MC_CLK_CFG_7_DIV_IN_OFF);
+		dib3000mc_get_frontend(fe, fep);
+		FEP2DIB(fep,&ch);
+	}
 
-	if (state->config.pll_init)
-		state->config.pll_init(fe);
+	/* make this a config parameter */
+	dib3000mc_set_output_mode(state, OUTMODE_MPEG2_FIFO);
 
-	deb_info("init end\n");
-	return 0;
+	return dib3000mc_tune(fe, &ch);
 }
-static int dib3000mc_read_status(struct dvb_frontend* fe, fe_status_t *stat)
+
+static int dib3000mc_read_status(struct dvb_frontend *fe, fe_status_t *stat)
 {
-	struct dib3000_state* state = fe->demodulator_priv;
-	u16 lock = rd(DIB3000MC_REG_LOCKING);
+	struct dib3000mc_state *state = fe->demodulator_priv;
+	u16 lock = dib3000mc_read_word(state, 509);
 
 	*stat = 0;
-	if (DIB3000MC_AGC_LOCK(lock))
+
+	if (lock & 0x8000)
 		*stat |= FE_HAS_SIGNAL;
-	if (DIB3000MC_CARRIER_LOCK(lock))
+	if (lock & 0x3000)
 		*stat |= FE_HAS_CARRIER;
-	if (DIB3000MC_TPS_LOCK(lock))
+	if (lock & 0x0100)
 		*stat |= FE_HAS_VITERBI;
-	if (DIB3000MC_MPEG_SYNC_LOCK(lock))
-		*stat |= (FE_HAS_SYNC | FE_HAS_LOCK);
-
-	deb_stat("actual status is %2x fifo_level: %x,244: %x, 206: %x, 207: %x, 1040: %x\n",*stat,rd(510),rd(244),rd(206),rd(207),rd(1040));
+	if (lock & 0x0010)
+		*stat |= FE_HAS_SYNC;
+	if (lock & 0x0008)
+		*stat |= FE_HAS_LOCK;
 
 	return 0;
 }
 
-static int dib3000mc_read_ber(struct dvb_frontend* fe, u32 *ber)
+static int dib3000mc_read_ber(struct dvb_frontend *fe, u32 *ber)
 {
-	struct dib3000_state* state = fe->demodulator_priv;
-	*ber = ((rd(DIB3000MC_REG_BER_MSB) << 16) | rd(DIB3000MC_REG_BER_LSB));
+	struct dib3000mc_state *state = fe->demodulator_priv;
+	*ber = (dib3000mc_read_word(state, 500) << 16) | dib3000mc_read_word(state, 501);
 	return 0;
 }
 
-static int dib3000mc_read_unc_blocks(struct dvb_frontend* fe, u32 *unc)
+static int dib3000mc_read_unc_blocks(struct dvb_frontend *fe, u32 *unc)
 {
-	struct dib3000_state* state = fe->demodulator_priv;
-
-	*unc = rd(DIB3000MC_REG_PACKET_ERRORS);
+	struct dib3000mc_state *state = fe->demodulator_priv;
+	*unc = dib3000mc_read_word(state, 508);
 	return 0;
 }
 
-/* see dib3000mb.c for calculation comments */
-static int dib3000mc_read_signal_strength(struct dvb_frontend* fe, u16 *strength)
+static int dib3000mc_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
 {
-	struct dib3000_state* state = fe->demodulator_priv;
-	u16 val = rd(DIB3000MC_REG_SIGNAL_NOISE_LSB);
-	*strength = (((val >> 6) & 0xff) << 8) + (val & 0x3f);
-
-	deb_stat("signal: mantisse = %d, exponent = %d\n",(*strength >> 8) & 0xff, *strength & 0xff);
+	struct dib3000mc_state *state = fe->demodulator_priv;
+	u16 val = dib3000mc_read_word(state, 392);
+	*strength = 65535 - val;
 	return 0;
 }
 
-/* see dib3000mb.c for calculation comments */
 static int dib3000mc_read_snr(struct dvb_frontend* fe, u16 *snr)
 {
-	struct dib3000_state* state = fe->demodulator_priv;
-	u16 val = rd(DIB3000MC_REG_SIGNAL_NOISE_LSB),
-		val2 = rd(DIB3000MC_REG_SIGNAL_NOISE_MSB);
-	u16 sig,noise;
-
-	sig =   (((val >> 6) & 0xff) << 8) + (val & 0x3f);
-	noise = (((val >> 4) & 0xff) << 8) + ((val & 0xf) << 2) + ((val2 >> 14) & 0x3);
-	if (noise == 0)
-		*snr = 0xffff;
-	else
-		*snr = (u16) sig/noise;
-
-	deb_stat("signal: mantisse = %d, exponent = %d\n",(sig >> 8) & 0xff, sig & 0xff);
-	deb_stat("noise:  mantisse = %d, exponent = %d\n",(noise >> 8) & 0xff, noise & 0xff);
-	deb_stat("snr: %d\n",*snr);
-	return 0;
-}
-
-static int dib3000mc_sleep(struct dvb_frontend* fe)
-{
-	struct dib3000_state* state = fe->demodulator_priv;
-
-	set_or(DIB3000MC_REG_CLK_CFG_7,DIB3000MC_CLK_CFG_7_PWR_DOWN);
-	wr(DIB3000MC_REG_CLK_CFG_1,DIB3000MC_CLK_CFG_1_POWER_DOWN);
-	wr(DIB3000MC_REG_CLK_CFG_2,DIB3000MC_CLK_CFG_2_POWER_DOWN);
-	wr(DIB3000MC_REG_CLK_CFG_3,DIB3000MC_CLK_CFG_3_POWER_DOWN);
+	*snr = 0x0000;
 	return 0;
 }
 
@@ -747,163 +820,96 @@ static int dib3000mc_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_fr
 	return 0;
 }
 
-static int dib3000mc_fe_init_nonmobile(struct dvb_frontend* fe)
+static void dib3000mc_release(struct dvb_frontend *fe)
 {
-	return dib3000mc_fe_init(fe, 0);
-}
-
-static int dib3000mc_set_frontend_and_tuner(struct dvb_frontend* fe, struct dvb_frontend_parameters *fep)
-{
-	return dib3000mc_set_frontend(fe, fep, 1);
-}
-
-static void dib3000mc_release(struct dvb_frontend* fe)
-{
-	struct dib3000_state *state = fe->demodulator_priv;
+	struct dib3000mc_state *state = fe->demodulator_priv;
+	dibx000_exit_i2c_master(&state->i2c_master);
 	kfree(state);
 }
 
-/* pid filter and transfer stuff */
-static int dib3000mc_pid_control(struct dvb_frontend *fe,int index, int pid,int onoff)
+int dib3000mc_pid_control(struct dvb_frontend *fe, int index, int pid,int onoff)
 {
-	struct dib3000_state *state = fe->demodulator_priv;
-	pid = (onoff ? pid | DIB3000_ACTIVATE_PID_FILTERING : 0);
-	wr(index+DIB3000MC_REG_FIRST_PID,pid);
+	struct dib3000mc_state *state = fe->demodulator_priv;
+	dib3000mc_write_word(state, 212 + index,  onoff ? (1 << 13) | pid : 0);
 	return 0;
 }
+EXPORT_SYMBOL(dib3000mc_pid_control);
 
-static int dib3000mc_fifo_control(struct dvb_frontend *fe, int onoff)
+int dib3000mc_pid_parse(struct dvb_frontend *fe, int onoff)
 {
-	struct dib3000_state *state = fe->demodulator_priv;
-	u16 tmp = rd(DIB3000MC_REG_SMO_MODE);
-
-	deb_xfer("%s fifo\n",onoff ? "enabling" : "disabling");
-
-	if (onoff) {
-		deb_xfer("%d %x\n",tmp & DIB3000MC_SMO_MODE_FIFO_UNFLUSH,tmp & DIB3000MC_SMO_MODE_FIFO_UNFLUSH);
-		wr(DIB3000MC_REG_SMO_MODE,tmp & DIB3000MC_SMO_MODE_FIFO_UNFLUSH);
-	} else {
-		deb_xfer("%d %x\n",tmp | DIB3000MC_SMO_MODE_FIFO_FLUSH,tmp | DIB3000MC_SMO_MODE_FIFO_FLUSH);
-		wr(DIB3000MC_REG_SMO_MODE,tmp | DIB3000MC_SMO_MODE_FIFO_FLUSH);
-	}
-	return 0;
+	struct dib3000mc_state *state = fe->demodulator_priv;
+	u16 tmp = dib3000mc_read_word(state, 206) & ~(1 << 4);
+	tmp |= (onoff << 4);
+	return dib3000mc_write_word(state, 206, tmp);
 }
+EXPORT_SYMBOL(dib3000mc_pid_parse);
 
-static int dib3000mc_pid_parse(struct dvb_frontend *fe, int onoff)
+void dib3000mc_set_config(struct dvb_frontend *fe, struct dib3000mc_config *cfg)
 {
-	struct dib3000_state *state = fe->demodulator_priv;
-	u16 tmp = rd(DIB3000MC_REG_SMO_MODE);
-
-	deb_xfer("%s pid parsing\n",onoff ? "enabling" : "disabling");
-
-	if (onoff) {
-		wr(DIB3000MC_REG_SMO_MODE,tmp | DIB3000MC_SMO_MODE_PID_PARSE);
-	} else {
-		wr(DIB3000MC_REG_SMO_MODE,tmp & DIB3000MC_SMO_MODE_NO_PID_PARSE);
-	}
-	return 0;
+	struct dib3000mc_state *state = fe->demodulator_priv;
+	state->cfg = cfg;
 }
+EXPORT_SYMBOL(dib3000mc_set_config);
 
-static int dib3000mc_tuner_pass_ctrl(struct dvb_frontend *fe, int onoff, u8 pll_addr)
-{
-	struct dib3000_state *state = fe->demodulator_priv;
-	if (onoff) {
-		wr(DIB3000MC_REG_TUNER, DIB3000_TUNER_WRITE_ENABLE(pll_addr));
-	} else {
-		wr(DIB3000MC_REG_TUNER, DIB3000_TUNER_WRITE_DISABLE(pll_addr));
-	}
-	return 0;
-}
+static struct dvb_frontend_ops dib3000mc_ops;
 
-static int dib3000mc_demod_init(struct dib3000_state *state)
+int dib3000mc_attach(struct i2c_adapter *i2c_adap, int no_of_demods, u8	default_addr,				u8 do_i2c_enum, struct dib3000mc_config cfg[], struct dvb_frontend *demod[])
 {
-	u16 default_addr = 0x0a;
-	/* first init */
-	if (state->config.demod_address != default_addr) {
-		deb_info("initializing the demod the first time. Setting demod addr to 0x%x\n",default_addr);
-		wr(DIB3000MC_REG_ELEC_OUT,DIB3000MC_ELEC_OUT_DIV_OUT_ON);
-		wr(DIB3000MC_REG_OUTMODE,DIB3000MC_OM_PAR_CONT_CLK);
+	struct dib3000mc_state *st;
+	int k, num=0;
 
-		wr(DIB3000MC_REG_RST_I2C_ADDR,
-			DIB3000MC_DEMOD_ADDR(default_addr) |
-			DIB3000MC_DEMOD_ADDR_ON);
-
-		state->config.demod_address = default_addr;
-
-		wr(DIB3000MC_REG_RST_I2C_ADDR,
-			DIB3000MC_DEMOD_ADDR(default_addr));
-	} else
-		deb_info("demod is already initialized. Demod addr: 0x%x\n",state->config.demod_address);
-	return 0;
-}
+	if (no_of_demods < 1)
+		return -EINVAL;
 
-int dib3000mc_set_agc_config(struct dvb_frontend *fe, const struct dib3000p_agc_config *agc)
-{
-	struct dib3000_state *st = fe->demodulator_priv;
-	st->config.agc = agc;
-	return 0;
-}
-EXPORT_SYMBOL(dib3000mc_set_agc_config);
+	for (k = 0; k < no_of_demods; k++) {
+		st = kzalloc(sizeof(struct dib3000mc_state), GFP_KERNEL);
+		if (st == NULL)
+			goto error;
 
-static struct dvb_frontend_ops dib3000mc_ops;
+		num++;
 
-struct dvb_frontend* dib3000mc_attach(const struct dib3000_config* config,
-				      struct i2c_adapter* i2c, struct dib_fe_xfer_ops *xfer_ops)
-{
-	struct dib3000_state* state = NULL;
-	u16 devid;
+		st->cfg = &cfg[k];
+	//	st->gpio_val = cfg[k].gpio_val;
+	//	st->gpio_dir = cfg[k].gpio_dir;
+		st->i2c_adap = i2c_adap;
 
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct dib3000_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
+		demod[k]           = &st->demod;
+		demod[k]->demodulator_priv     = st;
+		memcpy(&st->demod.ops, &dib3000mc_ops, sizeof(struct dvb_frontend_ops));
 
-	/* setup the state */
-	state->i2c = i2c;
-	memcpy(&state->config,config,sizeof(struct dib3000_config));
-	memcpy(&state->ops, &dib3000mc_ops, sizeof(struct dvb_frontend_ops));
+//		INIT_COMPONENT_REGISTER_ACCESS(&st->register_access, 12, 16, dib7000p_register_read, dib7000p_register_write, st);
+//		demod[k]->register_access = &st->register_access;
+	}
 
-	/* check for the correct demod */
-	if (rd(DIB3000_REG_MANUFACTOR_ID) != DIB3000_I2C_ID_DIBCOM)
+	if (do_i2c_enum) {
+		if (dib3000mc_i2c_enumeration(demod,no_of_demods,default_addr) != 0)
 			goto error;
-
-	devid = rd(DIB3000_REG_DEVICE_ID);
-	if (devid != DIB3000MC_DEVICE_ID && devid != DIB3000P_DEVICE_ID)
+	} else {
+		st = demod[0]->demodulator_priv;
+		st->i2c_addr = default_addr;
+		if (dib3000mc_identify(st) != 0)
 			goto error;
-
-	switch (devid) {
-		case DIB3000MC_DEVICE_ID:
-			info("Found a DiBcom 3000M-C, interesting...");
-			break;
-		case DIB3000P_DEVICE_ID:
-			info("Found a DiBcom 3000P.");
-			break;
 	}
 
-	/* create dvb_frontend */
-	state->frontend.ops = &state->ops;
-	state->frontend.demodulator_priv = state;
-
-	/* set the xfer operations */
-	xfer_ops->pid_parse = dib3000mc_pid_parse;
-	xfer_ops->fifo_ctrl = dib3000mc_fifo_control;
-	xfer_ops->pid_ctrl = dib3000mc_pid_control;
-	xfer_ops->tuner_pass_ctrl = dib3000mc_tuner_pass_ctrl;
-
-	dib3000mc_demod_init(state);
+	for (k = 0; k < num; k++) {
+		st = demod[k]->demodulator_priv;
+		dibx000_init_i2c_master(&st->i2c_master, DIB3000MC, st->i2c_adap, st->i2c_addr);
+	}
 
-	return &state->frontend;
+	return 0;
 
 error:
-	kfree(state);
-	return NULL;
+	for (k = 0; k < num; k++)
+		kfree(demod[k]->demodulator_priv);
+
+	return -EINVAL;
 }
+
 EXPORT_SYMBOL(dib3000mc_attach);
 
 static struct dvb_frontend_ops dib3000mc_ops = {
-
 	.info = {
-		.name			= "DiBcom 3000P/M-C DVB-T",
+		.name = "DiBcom 3000MC/P",
 		.type = FE_OFDM,
 		.frequency_min      = 44250000,
 		.frequency_max      = 867250000,
@@ -920,12 +926,12 @@ static struct dvb_frontend_ops dib3000mc_ops = {
 
 	.release              = dib3000mc_release,
 
-	.init = dib3000mc_fe_init_nonmobile,
+	.init                 = dib3000mc_init,
 	.sleep                = dib3000mc_sleep,
 
-	.set_frontend = dib3000mc_set_frontend_and_tuner,
-	.get_frontend = dib3000mc_get_frontend,
+	.set_frontend         = dib3000mc_set_frontend,
 	.get_tune_settings    = dib3000mc_fe_get_tune_settings,
+	.get_frontend         = dib3000mc_get_frontend,
 
 	.read_status          = dib3000mc_read_status,
 	.read_ber             = dib3000mc_read_ber,
@@ -934,6 +940,6 @@ static struct dvb_frontend_ops dib3000mc_ops = {
 	.read_ucblocks        = dib3000mc_read_unc_blocks,
 };
 
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
+MODULE_DESCRIPTION("Driver for the DiBcom 3000MC/P COFDM demodulator");
 MODULE_LICENSE("GPL");

drivers/media/dvb/frontends/dib3000mc_priv.h

-/*
- * dib3000mc_priv.h
- *
- * Copyright (C) 2004 Patrick Boettcher (patrick.boettcher@desy.de)
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation, version 2.
- *
- * for more information see dib3000mc.c .
- */
-
-#ifndef __DIB3000MC_PRIV_H__
-#define __DIB3000MC_PRIV_H__
-
-/*
- * Demodulator parameters
- * reg: 0  1 1  1 11 11 111
- *         | |  |  |  |  |
- *         | |  |  |  |  +-- alpha (000=0, 001=1, 010=2, 100=4)
- *         | |  |  |  +----- constellation (00=QPSK, 01=16QAM, 10=64QAM)
- *         | |  |  +-------- guard (00=1/32, 01=1/16, 10=1/8, 11=1/4)
- *         | |  +----------- transmission mode (0=2k, 1=8k)
- *         | |
- *         | +-------------- restart autosearch for parameters
- *         +---------------- restart the demodulator
- * reg: 181      1 111 1
- *               |  |  |
- *               |  |  +- FEC applies for HP or LP (0=LP, 1=HP)
- *               |  +---- FEC rate (001=1/2, 010=2/3, 011=3/4, 101=5/6, 111=7/8)
- *               +------- hierarchy on (0=no, 1=yes)
- */
-
-/* demodulator tuning parameter and restart options */
-#define DIB3000MC_REG_DEMOD_PARM		(     0)
-#define DIB3000MC_DEMOD_PARM(a,c,g,t)	( \
-		 (0x7 & a) | \
-		((0x3 & c) << 3) | \
-		((0x3 & g) << 5) | \
-		((0x1 & t) << 7) )
-#define DIB3000MC_DEMOD_RST_AUTO_SRCH_ON	(1 << 8)
-#define DIB3000MC_DEMOD_RST_AUTO_SRCH_OFF	(0 << 8)
-#define DIB3000MC_DEMOD_RST_DEMOD_ON		(1 << 9)
-#define DIB3000MC_DEMOD_RST_DEMOD_OFF		(0 << 9)
-
-/* register for hierarchy parameters */
-#define DIB3000MC_REG_HRCH_PARM			(   181)
-#define DIB3000MC_HRCH_PARM(s,f,h)		( \
-		 (0x1 & s) | \
-		((0x7 & f) << 1) | \
-		((0x1 & h) << 4) )
-
-/* timeout ??? */
-#define DIB3000MC_REG_UNK_1				(     1)
-#define DIB3000MC_UNK_1					(  0x04)
-
-/* timeout ??? */
-#define DIB3000MC_REG_UNK_2				(     2)
-#define DIB3000MC_UNK_2					(  0x04)
-
-/* timeout ??? */
-#define DIB3000MC_REG_UNK_3				(     3)
-#define DIB3000MC_UNK_3					(0x1000)
-
-#define DIB3000MC_REG_UNK_4				(     4)
-#define DIB3000MC_UNK_4					(0x0814)
-
-/* timeout ??? */
-#define DIB3000MC_REG_SEQ_TPS			(     5)
-#define DIB3000MC_SEQ_TPS_DEFAULT		(     1)
-#define DIB3000MC_SEQ_TPS(s,t)			( \
-		((s & 0x0f) << 4) | \
-		((t & 0x01) << 8) )
-#define DIB3000MC_IS_TPS(v)				((v << 8) & 0x1)
-#define DIB3000MC_IS_AS(v)				((v >> 4) & 0xf)
-
-/* parameters for the bandwidth */
-#define DIB3000MC_REG_BW_TIMOUT_MSB		(     6)
-#define DIB3000MC_REG_BW_TIMOUT_LSB		(     7)
-
-static u16 dib3000mc_reg_bandwidth[] = { 6,7,8,9,10,11,16,17 };
-
-/*static u16 dib3000mc_bandwidth_5mhz[] =
-	{ 0x28, 0x9380, 0x87, 0x4100, 0x2a4, 0x4500, 0x1, 0xb0d0 };*/
-
-static u16 dib3000mc_bandwidth_6mhz[] =
-	{ 0x21, 0xd040, 0x70, 0xb62b, 0x233, 0x8ed5, 0x1, 0xb0d0 };
-
-static u16 dib3000mc_bandwidth_7mhz[] =
-	{ 0x1c, 0xfba5, 0x60, 0x9c25, 0x1e3, 0x0cb7, 0x1, 0xb0d0 };
-
-static u16 dib3000mc_bandwidth_8mhz[] =
-	{ 0x19, 0x5c30, 0x54, 0x88a0, 0x1a6, 0xab20, 0x1, 0xb0d0 };
-
-static u16 dib3000mc_reg_bandwidth_general[] = { 12,13,14,15 };
-static u16 dib3000mc_bandwidth_general[] = { 0x0000, 0x03e8, 0x0000, 0x03f2 };
-
-/* lock mask */
-#define DIB3000MC_REG_LOCK_MASK			(    15)
-#define DIB3000MC_ACTIVATE_LOCK_MASK	(0x0800)
-
-/* reset the uncorrected packet count (??? do it 5 times) */
-#define DIB3000MC_REG_RST_UNC			(    18)
-#define DIB3000MC_RST_UNC_ON			(     1)
-#define DIB3000MC_RST_UNC_OFF			(     0)
-
-#define DIB3000MC_REG_UNK_19			(    19)
-#define DIB3000MC_UNK_19				(     0)
-
-/* DDS frequency value (IF position) and inversion bit */
-#define DIB3000MC_REG_INVERSION			(    21)
-#define DIB3000MC_REG_SET_DDS_FREQ_MSB	(    21)
-#define DIB3000MC_DDS_FREQ_MSB_INV_OFF	(0x0164)
-#define DIB3000MC_DDS_FREQ_MSB_INV_ON	(0x0364)
-
-#define DIB3000MC_REG_SET_DDS_FREQ_LSB	(    22)
-#define DIB3000MC_DDS_FREQ_LSB			(0x463d)
-
-/* timing frequencies setting */
-#define DIB3000MC_REG_TIMING_FREQ_MSB	(    23)
-#define DIB3000MC_REG_TIMING_FREQ_LSB	(    24)
-#define DIB3000MC_CLOCK_REF				(0x151fd1)
-
-//static u16 dib3000mc_reg_timing_freq[] = { 23,24 };
-
-//static u16 dib3000mc_timing_freq[][2] = {
-//	{ 0x69, 0x9f18 }, /* 5 MHz */
-//	{ 0x7e ,0xbee9 }, /* 6 MHz */
-//	{ 0x93 ,0xdebb }, /* 7 MHz */
-//	{ 0xa8 ,0xfe8c }, /* 8 MHz */
-//};
-
-/* timeout ??? */
-static u16 dib3000mc_reg_offset[] = { 26,33 };
-
-static u16 dib3000mc_offset[][2] = {
-	{ 26240, 5 }, /* default */
-	{ 30336, 6 }, /* 8K */
-	{ 38528, 8 }, /* 2K */
-};
-
-#define DIB3000MC_REG_ISI				(    29)
-#define DIB3000MC_ISI_DEFAULT			(0x1073)
-#define DIB3000MC_ISI_ACTIVATE			(0x0000)
-#define DIB3000MC_ISI_INHIBIT			(0x0200)
-
-/* impulse noise control */
-static u16 dib3000mc_reg_imp_noise_ctl[] = { 34,35 };
-
-static u16 dib3000mc_imp_noise_ctl[][2] = {
-	{ 0x1294, 0x1ff8 }, /* mode 0 */
-	{ 0x1294, 0x1ff8 }, /* mode 1 */
-	{ 0x1294, 0x1ff8 }, /* mode 2 */
-	{ 0x1294, 0x1ff8 }, /* mode 3 */
-	{ 0x1294, 0x1ff8 }, /* mode 4 */
-};
-
-/* AGC loop bandwidth */
-static u16 dib3000mc_reg_agc_bandwidth[] = { 40,41 };
-static u16 dib3000mc_agc_bandwidth[]  = { 0x119,0x330 };
-
-static u16 dib3000mc_reg_agc_bandwidth_general[] = { 50,51,52,53,54 };
-static u16 dib3000mc_agc_bandwidth_general[] =
-	{ 0x8000, 0x91ca, 0x01ba, 0x0087, 0x0087 };
-
-#define DIB3000MC_REG_IMP_NOISE_55		(    55)
-#define DIB3000MC_IMP_NEW_ALGO(w)		(w | (1<<10))
-
-/* Impulse noise params */
-static u16 dib3000mc_reg_impulse_noise[] = { 55,56,57 };
-static u16 dib3000mc_impluse_noise[][3] = {
-	{ 0x489, 0x89, 0x72 }, /* 5 MHz */
-	{ 0x4a5, 0xa5, 0x89 }, /* 6 MHz */
-	{ 0x4c0, 0xc0, 0xa0 }, /* 7 MHz */
-	{ 0x4db, 0xdb, 0xb7 }, /* 8 Mhz */
-};
-
-static u16 dib3000mc_reg_fft[] = {
-	58,59,60,61,62,63,64,65,66,67,68,69,
-	70,71,72,73,74,75,76,77,78,79,80,81,
-	82,83,84,85,86
-};
-
-static u16 dib3000mc_fft_modes[][29] = {
-	{	0x38, 0x6d9, 0x3f28, 0x7a7, 0x3a74, 0x196, 0x32a, 0x48c,
-		0x3ffe, 0x7f3, 0x2d94, 0x76, 0x53d,
-		0x3ff8, 0x7e3, 0x3320, 0x76, 0x5b3,
-		0x3feb, 0x7d2, 0x365e, 0x76, 0x48c,
-		0x3ffe, 0x5b3, 0x3feb, 0x76,   0x0, 0xd
-	}, /* fft mode 0 */
-	{	0x3b, 0x6d9, 0x3f28, 0x7a7, 0x3a74, 0x196, 0x32a, 0x48c,
-		0x3ffe, 0x7f3, 0x2d94, 0x76, 0x53d,
-		0x3ff8, 0x7e3, 0x3320, 0x76, 0x5b3,
-		0x3feb, 0x7d2, 0x365e, 0x76, 0x48c,
-		0x3ffe, 0x5b3, 0x3feb, 0x0,  0x8200, 0xd
-	}, /* fft mode 1 */
-};
-
-#define DIB3000MC_REG_UNK_88			(    88)
-#define DIB3000MC_UNK_88				(0x0410)
-
-static u16 dib3000mc_reg_bw[] = { 93,94,95,96,97,98 };
-static u16 dib3000mc_bw[][6] = {
-	{ 0,0,0,0,0,0 }, /* 5 MHz */
-	{ 0,0,0,0,0,0 }, /* 6 MHz */
-	{ 0,0,0,0,0,0 }, /* 7 MHz */
-	{ 0x20, 0x21, 0x20, 0x23, 0x20, 0x27 }, /* 8 MHz */
-};
-
-
-/* phase noise control */
-#define DIB3000MC_REG_UNK_99			(    99)
-#define DIB3000MC_UNK_99				(0x0220)
-
-#define DIB3000MC_REG_SCAN_BOOST		(   100)
-#define DIB3000MC_SCAN_BOOST_ON			((11 << 6) + 6)
-#define DIB3000MC_SCAN_BOOST_OFF		((16 << 6) + 9)
-
-/* timeout ??? */
-#define DIB3000MC_REG_UNK_110			(   110)
-#define DIB3000MC_UNK_110				(  3277)
-
-#define DIB3000MC_REG_UNK_111			(   111)
-#define DIB3000MC_UNK_111_PH_N_MODE_0	(     0)
-#define DIB3000MC_UNK_111_PH_N_MODE_1	(1 << 1)
-
-/* superious rm config */
-#define DIB3000MC_REG_UNK_120			(   120)
-#define DIB3000MC_UNK_120				(  8207)
-
-#define DIB3000MC_REG_UNK_133			(   133)
-#define DIB3000MC_UNK_133				( 15564)
-
-#define DIB3000MC_REG_UNK_134			(   134)
-#define DIB3000MC_UNK_134				(     0)
-
-/* adapter config for constellation */
-static u16 dib3000mc_reg_adp_cfg[] = { 129, 130, 131, 132 };
-
-static u16 dib3000mc_adp_cfg[][4] = {
-	{ 0x99a, 0x7fae, 0x333, 0x7ff0 }, /* QPSK  */
-	{ 0x23d, 0x7fdf, 0x0a4, 0x7ff0 }, /* 16-QAM */
-	{ 0x148, 0x7ff0, 0x0a4, 0x7ff8 }, /* 64-QAM */
-};
-
-static u16 dib3000mc_reg_mobile_mode[] = { 139, 140, 141, 175, 1032 };
-
-static u16 dib3000mc_mobile_mode[][5] = {
-	{ 0x01, 0x0, 0x0, 0x00, 0x12c }, /* fixed */
-	{ 0x01, 0x0, 0x0, 0x00, 0x12c }, /* portable */
-	{ 0x00, 0x0, 0x0, 0x02, 0x000 }, /* mobile */
-	{ 0x00, 0x0, 0x0, 0x02, 0x000 }, /* auto */
-};
-
-#define DIB3000MC_REG_DIVERSITY1		(   177)
-#define DIB3000MC_DIVERSITY1_DEFAULT	(     1)
-
-#define DIB3000MC_REG_DIVERSITY2		(   178)
-#define DIB3000MC_DIVERSITY2_DEFAULT	(     1)
-
-#define DIB3000MC_REG_DIVERSITY3		(   180)
-#define DIB3000MC_DIVERSITY3_IN_OFF		(0xfff0)
-#define DIB3000MC_DIVERSITY3_IN_ON		(0xfff6)
-
-#define DIB3000MC_REG_FEC_CFG			(   195)
-#define DIB3000MC_FEC_CFG				(  0x10)
-
-/*
- * reg 206, output mode
- *              1111 1111
- *              |||| ||||
- *              |||| |||+- unk
- *              |||| ||+-- unk
- *              |||| |+--- unk (on by default)
- *              |||| +---- fifo_ctrl (1 = inhibit (flushed), 0 = active (unflushed))
- *              |||+------ pid_parse (1 = enabled, 0 = disabled)
- *              ||+------- outp_188  (1 = TS packet size 188, 0 = packet size 204)
- *              |+-------- unk
- *              +--------- unk
- */
-
-#define DIB3000MC_REG_SMO_MODE			(   206)
-#define DIB3000MC_SMO_MODE_DEFAULT		(1 << 2)
-#define DIB3000MC_SMO_MODE_FIFO_FLUSH	(1 << 3)
-#define DIB3000MC_SMO_MODE_FIFO_UNFLUSH	(0xfff7)
-#define DIB3000MC_SMO_MODE_PID_PARSE	(1 << 4)
-#define DIB3000MC_SMO_MODE_NO_PID_PARSE	(0xffef)
-#define DIB3000MC_SMO_MODE_188			(1 << 5)
-#define DIB3000MC_SMO_MODE_SLAVE		(DIB3000MC_SMO_MODE_DEFAULT | \
-			DIB3000MC_SMO_MODE_188 | DIB3000MC_SMO_MODE_PID_PARSE | (1<<1))
-
-#define DIB3000MC_REG_FIFO_THRESHOLD	(   207)
-#define DIB3000MC_FIFO_THRESHOLD_DEFAULT	(  1792)
-#define DIB3000MC_FIFO_THRESHOLD_SLAVE	(   512)
-/*
- * pidfilter
- * it is not a hardware pidfilter but a filter which drops all pids
- * except the ones set. When connected to USB1.1 bandwidth this is important.
- * DiB3000P/M-C can filter up to 32 PIDs
- */
-#define DIB3000MC_REG_FIRST_PID			(   212)
-#define DIB3000MC_NUM_PIDS				(    32)
-
-#define DIB3000MC_REG_OUTMODE			(   244)
-#define DIB3000MC_OM_PARALLEL_GATED_CLK	(     0)
-#define DIB3000MC_OM_PAR_CONT_CLK		(1 << 11)
-#define DIB3000MC_OM_SERIAL				(2 << 11)
-#define DIB3000MC_OM_DIVOUT_ON			(4 << 11)
-#define DIB3000MC_OM_SLAVE				(DIB3000MC_OM_DIVOUT_ON | DIB3000MC_OM_PAR_CONT_CLK)
-
-#define DIB3000MC_REG_RF_POWER			(   392)
-
-#define DIB3000MC_REG_FFT_POSITION		(   407)
-
-#define DIB3000MC_REG_DDS_FREQ_MSB		(   414)
-#define DIB3000MC_REG_DDS_FREQ_LSB		(   415)
-
-#define DIB3000MC_REG_TIMING_OFFS_MSB	(   416)
-#define DIB3000MC_REG_TIMING_OFFS_LSB	(   417)
-
-#define DIB3000MC_REG_TUNING_PARM		(   458)
-#define DIB3000MC_TP_QAM(v)				((v >> 13) & 0x03)
-#define DIB3000MC_TP_HRCH(v)			((v >> 12) & 0x01)
-#define DIB3000MC_TP_ALPHA(v)			((v >> 9) & 0x07)
-#define DIB3000MC_TP_FFT(v)				((v >> 8) & 0x01)
-#define DIB3000MC_TP_FEC_CR_HP(v)		((v >> 5) & 0x07)
-#define DIB3000MC_TP_FEC_CR_LP(v)		((v >> 2) & 0x07)
-#define DIB3000MC_TP_GUARD(v)			(v & 0x03)
-
-#define DIB3000MC_REG_SIGNAL_NOISE_MSB	(   483)
-#define DIB3000MC_REG_SIGNAL_NOISE_LSB	(   484)
-
-#define DIB3000MC_REG_MER				(   485)
-
-#define DIB3000MC_REG_BER_MSB			(   500)
-#define DIB3000MC_REG_BER_LSB			(   501)
-
-#define DIB3000MC_REG_PACKET_ERRORS		(   503)
-
-#define DIB3000MC_REG_PACKET_ERROR_COUNT	(   506)
-
-#define DIB3000MC_REG_LOCK_507			(   507)
-#define DIB3000MC_LOCK_507				(0x0002) // ? name correct ?
-
-#define DIB3000MC_REG_LOCKING			(   509)
-#define DIB3000MC_AGC_LOCK(v)			(v & 0x8000)
-#define DIB3000MC_CARRIER_LOCK(v)		(v & 0x2000)
-#define DIB3000MC_MPEG_SYNC_LOCK(v)		(v & 0x0080)
-#define DIB3000MC_MPEG_DATA_LOCK(v)		(v & 0x0040)
-#define DIB3000MC_TPS_LOCK(v)			(v & 0x0004)
-
-#define DIB3000MC_REG_AS_IRQ			(   511)
-#define DIB3000MC_AS_IRQ_SUCCESS		(1 << 1)
-#define DIB3000MC_AS_IRQ_FAIL			(     1)
-
-#define DIB3000MC_REG_TUNER				(   769)
-
-#define DIB3000MC_REG_RST_I2C_ADDR		(  1024)
-#define DIB3000MC_DEMOD_ADDR_ON			(     1)
-#define DIB3000MC_DEMOD_ADDR(a)			((a << 4) & 0x03F0)
-
-#define DIB3000MC_REG_RESTART			(  1027)
-#define DIB3000MC_RESTART_OFF			(0x0000)
-#define DIB3000MC_RESTART_AGC			(0x0800)
-#define DIB3000MC_RESTART_CONFIG		(0x8000)
-
-#define DIB3000MC_REG_RESTART_VIT		(  1028)
-#define DIB3000MC_RESTART_VIT_OFF		(     0)
-#define DIB3000MC_RESTART_VIT_ON		(     1)
-
-#define DIB3000MC_REG_CLK_CFG_1			(  1031)
-#define DIB3000MC_CLK_CFG_1_POWER_UP	(     0)
-#define DIB3000MC_CLK_CFG_1_POWER_DOWN	(0xffff)
-
-#define DIB3000MC_REG_CLK_CFG_2			(  1032)
-#define DIB3000MC_CLK_CFG_2_PUP_FIXED	(0x012c)
-#define DIB3000MC_CLK_CFG_2_PUP_PORT	(0x0104)
-#define DIB3000MC_CLK_CFG_2_PUP_MOBILE  (0x0000)
-#define DIB3000MC_CLK_CFG_2_POWER_DOWN	(0xffff)
-
-#define DIB3000MC_REG_CLK_CFG_3			(  1033)
-#define DIB3000MC_CLK_CFG_3_POWER_UP	(     0)
-#define DIB3000MC_CLK_CFG_3_POWER_DOWN	(0xfff5)
-
-#define DIB3000MC_REG_CLK_CFG_7			(  1037)
-#define DIB3000MC_CLK_CFG_7_INIT		( 12592)
-#define DIB3000MC_CLK_CFG_7_POWER_UP	(~0x0003)
-#define DIB3000MC_CLK_CFG_7_PWR_DOWN	(0x0003)
-#define DIB3000MC_CLK_CFG_7_DIV_IN_OFF	(1 << 8)
-
-/* was commented out ??? */
-#define DIB3000MC_REG_CLK_CFG_8			(  1038)
-#define DIB3000MC_CLK_CFG_8_POWER_UP	(0x160c)
-
-#define DIB3000MC_REG_CLK_CFG_9			(  1039)
-#define DIB3000MC_CLK_CFG_9_POWER_UP	(     0)
-
-/* also clock ??? */
-#define DIB3000MC_REG_ELEC_OUT			(  1040)
-#define DIB3000MC_ELEC_OUT_HIGH_Z		(     0)
-#define DIB3000MC_ELEC_OUT_DIV_OUT_ON	(     1)
-#define DIB3000MC_ELEC_OUT_SLAVE		(     3)
-
-#endif

drivers/media/dvb/frontends/mt2060.c

@@ -32,7 +32,7 @@
 #include "mt2060.h"
 #include "mt2060_priv.h"
 
-static int debug=0;
+static int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
 
@@ -350,7 +350,7 @@ int mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt206
 		kfree(priv);
 		return -ENODEV;
 	}
-	printk(KERN_INFO "MT2060: successfully identified\n");
+	printk(KERN_INFO "MT2060: successfully identified (IF1 = %d)\n", if1);
 	memcpy(&fe->ops.tuner_ops, &mt2060_tuner_ops, sizeof(struct dvb_tuner_ops));
 
 	fe->tuner_priv = priv;