[Blackfin] arch: move the init sections to the end of memory

Move the init sections to the end of memory so that after they
are free, run time memory is all continugous - this should help decrease
memory fragementation.

When doing this, we also pack some of the other sections a little closer
together, to make sure we don't waste memory. To make this happen,
we need to rename the .data.init_task section to .init_task.data, so
it doesn't get picked up by the linker script glob.
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

arch/blackfin/kernel/init_task.c

@@ -57,5 +57,5 @@ EXPORT_SYMBOL(init_task);
  * "init_task" linker map entry.
  */
 union thread_union init_thread_union
-    __attribute__ ((__section__(".data.init_task"))) = {
+    __attribute__ ((__section__(".init_task.data"))) = {
 INIT_THREAD_INFO(init_task)};

arch/blackfin/kernel/setup.c

@@ -427,7 +427,7 @@ static __init void parse_cmdline_early(char *cmdline_p)
 static __init void  memory_setup(void)
 {
 	_rambase = (unsigned long)_stext;
-	_ramstart = (unsigned long)__bss_stop;
+	_ramstart = (unsigned long)_end;
 
 	if (DMA_UNCACHED_REGION > (_ramend - _ramstart)) {
 		console_init();
@@ -489,7 +489,7 @@ static __init void  memory_setup(void)
 	}
 
 	/* Relocate MTD image to the top of memory after the uncached memory area */
-	dma_memcpy((char *)memory_end, __bss_stop, mtd_size);
+	dma_memcpy((char *)memory_end, _end, mtd_size);
 
 	memory_mtd_start = memory_end;
 	_ebss = memory_mtd_start;	/* define _ebss for compatible */
@@ -528,13 +528,13 @@ static __init void  memory_setup(void)
 	printk(KERN_INFO "Board Memory: %ldMB\n", physical_mem_end >> 20);
 	printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
 
-	printk( KERN_INFO "Memory map:\n"
+	printk(KERN_INFO "Memory map:\n"
 		KERN_INFO "  text      = 0x%p-0x%p\n"
 		KERN_INFO "  rodata    = 0x%p-0x%p\n"
+		KERN_INFO "  bss       = 0x%p-0x%p\n"
 		KERN_INFO "  data      = 0x%p-0x%p\n"
 		KERN_INFO "    stack   = 0x%p-0x%p\n"
 		KERN_INFO "  init      = 0x%p-0x%p\n"
-		KERN_INFO "  bss       = 0x%p-0x%p\n"
 		KERN_INFO "  available = 0x%p-0x%p\n"
 #ifdef CONFIG_MTD_UCLINUX
 		KERN_INFO "  rootfs    = 0x%p-0x%p\n"
@@ -544,12 +544,12 @@ static __init void  memory_setup(void)
 #endif
 		, _stext, _etext,
 		__start_rodata, __end_rodata,
+		__bss_start, __bss_stop,
 		_sdata, _edata,
 		(void *)&init_thread_union,
 		(void *)((int)(&init_thread_union) + 0x2000),
-	       __init_begin, __init_end,
-	       __bss_start, __bss_stop,
-	       (void *)_ramstart, (void *)memory_end
+		__init_begin, __init_end,
+		(void *)_ramstart, (void *)memory_end
 #ifdef CONFIG_MTD_UCLINUX
 		, (void *)memory_mtd_start, (void *)(memory_mtd_start + mtd_size)
 #endif

arch/blackfin/kernel/vmlinux.lds.S

@@ -41,6 +41,9 @@ _jiffies = _jiffies_64;
 SECTIONS
 {
 	. = CONFIG_BOOT_LOAD;
+	/* Neither the text, ro_data or bss section need to be aligned
+	 * So pack them back to back
+	 */
 	.text :
 	{
 		__text = .;
@@ -58,22 +61,25 @@ SECTIONS
 		*(__ex_table)
 		___stop___ex_table = .;
 
-		. = ALIGN(4);
 		__etext = .;
 	}
 
-	RO_DATA(PAGE_SIZE)
+	/* Just in case the first read only is a 32-bit access */
+	RO_DATA(4)
+
+	.bss :
+	{
+		. = ALIGN(4);
+		___bss_start = .;
+		*(.bss .bss.*)
+		*(COMMON)
+		___bss_stop = .;
+	}
 
 	.data :
 	{
-		/* make sure the init_task is aligned to the
-		 * kernel thread size so we can locate the kernel
-		 * stack properly and quickly.
-		 */
 		__sdata = .;
-		. = ALIGN(THREAD_SIZE);
-		*(.data.init_task)
-
+		/* This gets done first, so the glob doesn't suck it in */
 		. = ALIGN(32);
 		*(.data.cacheline_aligned)
 
@@ -81,10 +87,22 @@ SECTIONS
 		*(.data.*)
 		CONSTRUCTORS
 
+		/* make sure the init_task is aligned to the
+		 * kernel thread size so we can locate the kernel
+		 * stack properly and quickly.
+		 */
 		. = ALIGN(THREAD_SIZE);
+		*(.init_task.data)
+
 		__edata = .;
 	}
 
+	/* The init section should be last, so when we free it, it goes into
+	 * the general memory pool, and (hopefully) will decrease fragmentation
+	 * a tiny bit. The init section has a _requirement_ that it be
+	 * PAGE_SIZE aligned
+	 */
+	. = ALIGN(PAGE_SIZE);
 	___init_begin = .;
 
 	.init.text :
@@ -179,16 +197,7 @@ SECTIONS
 	. = ALIGN(PAGE_SIZE);
 	___init_end = .;
 
-	.bss :
-	{
-		. = ALIGN(4);
-		___bss_start = .;
-		*(.bss .bss.*)
-		*(COMMON)
-		. = ALIGN(4);
-		___bss_stop = .;
-		__end = .;
-	}
+	__end =.;
 
 	STABS_DEBUG