Commit b7769c45 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'rtc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "A new driver this cycle is making the bulk of the changes and the
  rx8010 driver has been rework to use the modern APIs.

  Summary:

  Subsystem:
   - new generic DT properties: aux-voltage-chargeable,
     trickle-voltage-millivolt

  New driver:
   - Microcrystal RV-3032

  Drivers:
   - ds1307: use aux-voltage-chargeable
   - r9701, rx8010: modernization of the driver
   - rv3028: fix clock output, trickle resistor values, RAM
     configuration registers"

* tag 'rtc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
  rtc: r9701: set range
  rtc: r9701: convert to devm_rtc_allocate_device
  rtc: r9701: stop setting RWKCNT
  rtc: r9701: remove useless memset
  rtc: r9701: stop setting a default time
  rtc: r9701: remove leftover comment
  rtc: rv3032: Add a driver for Microcrystal RV-3032
  dt-bindings: rtc: rv3032: add RV-3032 bindings
  dt-bindings: rtc: add trickle-voltage-millivolt
  rtc: rv3028: ensure ram configuration registers are saved
  rtc: rv3028: factorize EERD bit handling
  rtc: rv3028: fix trickle resistor values
  rtc: rv3028: fix clock output support
  rtc: mt6397: Remove unused member dev
  rtc: rv8803: simplify the return expression of rv8803_nvram_write
  rtc: meson: simplify the return expression of meson_vrtc_probe
  rtc: rx8010: rename rx8010_init_client() to rx8010_init()
  rtc: ds1307: enable rx8130's backup battery, make it chargeable optionally
  rtc: ds1307: consider aux-voltage-chargeable
  rtc: ds1307: store previous charge default per chip
  ...
parents 68a36336 35331b50
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/rtc/microcrystal,rv3032.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Microchip RV-3032 RTC Device Tree Bindings
allOf:
- $ref: "rtc.yaml#"
maintainers:
- Alexandre Belloni <alexandre.belloni@bootlin.com>
properties:
compatible:
const: microcrystal,rv3032
reg:
maxItems: 1
interrupts:
maxItems: 1
start-year: true
trickle-resistor-ohms:
enum:
- 1000
- 2000
- 7000
- 11000
trickle-voltage-millivolt:
enum:
- 1750
- 3000
- 4400
required:
- compatible
- reg
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
rtc@51 {
compatible = "microcrystal,rv3032";
reg = <0x51>;
status = "okay";
pinctrl-0 = <&rtc_nint_pins>;
interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
trickle-resistor-ohms = <7000>;
trickle-voltage-millivolt = <1750>;
};
};
...
......@@ -31,9 +31,16 @@ Optional properties:
Selected resistor for trickle charger
Possible values are 250, 2000, 4000
Should be given if trickle charger should be enabled
- trickle-diode-disable : ds1339, ds1340 and ds 1388 only
- aux-voltage-chargeable: ds1339, ds1340, ds1388 and rx8130 only
Tells whether the battery/supercap of the RTC (if any) is
chargeable or not.
Possible values are 0 (not chargeable), 1 (chargeable)
Deprecated properties:
- trickle-diode-disable : ds1339, ds1340 and ds1388 only
Do not use internal trickle charger diode
Should be given if internal trickle charger diode should be disabled
(superseded by aux-voltage-chargeable)
Example:
ds1339: rtc@68 {
......
......@@ -17,6 +17,15 @@ properties:
$nodename:
pattern: "^rtc(@.*|-[0-9a-f])*$"
aux-voltage-chargeable:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
description: |
Tells whether the battery/supercap of the RTC (if any) is
chargeable or not:
0: not chargeable
1: chargeable
quartz-load-femtofarads:
$ref: /schemas/types.yaml#/definitions/uint32
description:
......@@ -35,6 +44,7 @@ properties:
description:
Do not use internal trickle charger diode. Should be given if
internal trickle charger diode should be disabled.
deprecated: true
trickle-resistor-ohms:
$ref: /schemas/types.yaml#/definitions/uint32
......@@ -42,6 +52,12 @@ properties:
Selected resistor for trickle charger. Should be given
if trickle charger should be enabled.
trickle-voltage-millivolt:
description:
Selected voltage for trickle charger. Should be given
if trickle charger should be enabled and the trickle voltage is different
from the RTC main power supply.
wakeup-source:
$ref: /schemas/types.yaml#/definitions/flag
description:
......
......@@ -669,6 +669,16 @@ config RTC_DRV_RV3028
This driver can also be built as a module. If so, the module
will be called rtc-rv3028.
config RTC_DRV_RV3032
tristate "Micro Crystal RV3032"
select REGMAP_I2C
help
If you say yes here you get support for the Micro Crystal
RV3032.
This driver can also be built as a module. If so, the module
will be called rtc-rv3032.
config RTC_DRV_RV8803
tristate "Micro Crystal RV8803, Epson RX8900"
help
......
......@@ -141,6 +141,7 @@ obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o
obj-$(CONFIG_RTC_DRV_RTD119X) += rtc-rtd119x.o
obj-$(CONFIG_RTC_DRV_RV3028) += rtc-rv3028.o
obj-$(CONFIG_RTC_DRV_RV3029C2) += rtc-rv3029c2.o
obj-$(CONFIG_RTC_DRV_RV3032) += rtc-rv3032.o
obj-$(CONFIG_RTC_DRV_RV8803) += rtc-rv8803.o
obj-$(CONFIG_RTC_DRV_RX4581) += rtc-rx4581.o
obj-$(CONFIG_RTC_DRV_RX6110) += rtc-rx6110.o
......
......@@ -1006,6 +1006,7 @@ static int cmos_suspend(struct device *dev)
enable_irq_wake(cmos->irq);
}
memset(&cmos->saved_wkalrm, 0, sizeof(struct rtc_wkalrm));
cmos_read_alarm(dev, &cmos->saved_wkalrm);
dev_dbg(dev, "suspend%s, ctrl %02x\n",
......@@ -1054,6 +1055,7 @@ static void cmos_check_wkalrm(struct device *dev)
return;
}
memset(&current_alarm, 0, sizeof(struct rtc_wkalrm));
cmos_read_alarm(dev, &current_alarm);
t_current_expires = rtc_tm_to_time64(&current_alarm.time);
t_saved_expires = rtc_tm_to_time64(&cmos->saved_wkalrm.time);
......
......@@ -122,6 +122,9 @@ enum ds_type {
#define RX8130_REG_FLAG_AF BIT(3)
#define RX8130_REG_CONTROL0 0x1e
#define RX8130_REG_CONTROL0_AIE BIT(3)
#define RX8130_REG_CONTROL1 0x1f
#define RX8130_REG_CONTROL1_INIEN BIT(4)
#define RX8130_REG_CONTROL1_CHGEN BIT(5)
#define MCP794XX_REG_CONTROL 0x07
# define MCP794XX_BIT_ALM0_EN 0x10
......@@ -153,6 +156,7 @@ enum ds_type {
#define DS1388_REG_CONTROL 0x0c
# define DS1388_BIT_RST BIT(0)
# define DS1388_BIT_WDE BIT(1)
# define DS1388_BIT_nEOSC BIT(7)
/* negative offset step is -2.034ppm */
#define M41TXX_NEG_OFFSET_STEP_PPB 2034
......@@ -190,6 +194,15 @@ struct chip_desc {
u16 trickle_charger_reg;
u8 (*do_trickle_setup)(struct ds1307 *, u32,
bool);
/* Does the RTC require trickle-resistor-ohms to select the value of
* the resistor between Vcc and Vbackup?
*/
bool requires_trickle_resistor;
/* Some RTC's batteries and supercaps were charged by default, others
* allow charging but were not configured previously to do so.
* Remember this behavior to stay backwards compatible.
*/
bool charge_default;
};
static const struct chip_desc chips[last_ds_type];
......@@ -352,6 +365,10 @@ static int ds1307_set_time(struct device *dev, struct rtc_time *t)
regmap_update_bits(ds1307->regmap, DS1340_REG_FLAG,
DS1340_BIT_OSF, 0);
break;
case ds_1388:
regmap_update_bits(ds1307->regmap, DS1388_REG_FLAG,
DS1388_BIT_OSF, 0);
break;
case mcp794xx:
/*
* these bits were cleared when preparing the date/time
......@@ -507,6 +524,8 @@ static u8 do_trickle_setup_ds1339(struct ds1307 *ds1307, u32 ohms, bool diode)
u8 setup = (diode) ? DS1307_TRICKLE_CHARGER_DIODE :
DS1307_TRICKLE_CHARGER_NO_DIODE;
setup |= DS13XX_TRICKLE_CHARGER_MAGIC;
switch (ohms) {
case 250:
setup |= DS1307_TRICKLE_CHARGER_250_OHM;
......@@ -525,6 +544,16 @@ static u8 do_trickle_setup_ds1339(struct ds1307 *ds1307, u32 ohms, bool diode)
return setup;
}
static u8 do_trickle_setup_rx8130(struct ds1307 *ds1307, u32 ohms, bool diode)
{
/* make sure that the backup battery is enabled */
u8 setup = RX8130_REG_CONTROL1_INIEN;
if (diode)
setup |= RX8130_REG_CONTROL1_CHGEN;
return setup;
}
static irqreturn_t rx8130_irq(int irq, void *dev_id)
{
struct ds1307 *ds1307 = dev_id;
......@@ -979,6 +1008,8 @@ static const struct chip_desc chips[last_ds_type] = {
.bbsqi_bit = DS1339_BIT_BBSQI,
.trickle_charger_reg = 0x10,
.do_trickle_setup = &do_trickle_setup_ds1339,
.requires_trickle_resistor = true,
.charge_default = true,
},
[ds_1340] = {
.century_reg = DS1307_REG_HOUR,
......@@ -986,6 +1017,8 @@ static const struct chip_desc chips[last_ds_type] = {
.century_bit = DS1340_BIT_CENTURY,
.do_trickle_setup = &do_trickle_setup_ds1339,
.trickle_charger_reg = 0x08,
.requires_trickle_resistor = true,
.charge_default = true,
},
[ds_1341] = {
.century_reg = DS1307_REG_MONTH,
......@@ -1009,6 +1042,8 @@ static const struct chip_desc chips[last_ds_type] = {
.offset = 0x10,
.irq_handler = rx8130_irq,
.rtc_ops = &rx8130_rtc_ops,
.trickle_charger_reg = RX8130_REG_CONTROL1,
.do_trickle_setup = &do_trickle_setup_rx8130,
},
[m41t0] = {
.rtc_ops = &m41txx_rtc_ops,
......@@ -1293,18 +1328,37 @@ static int ds1307_nvram_write(void *priv, unsigned int offset, void *val,
static u8 ds1307_trickle_init(struct ds1307 *ds1307,
const struct chip_desc *chip)
{
u32 ohms;
bool diode = true;
u32 ohms, chargeable;
bool diode = chip->charge_default;
if (!chip->do_trickle_setup)
return 0;
if (device_property_read_u32(ds1307->dev, "trickle-resistor-ohms",
&ohms))
&ohms) && chip->requires_trickle_resistor)
return 0;
if (device_property_read_bool(ds1307->dev, "trickle-diode-disable"))
/* aux-voltage-chargeable takes precedence over the deprecated
* trickle-diode-disable
*/
if (!device_property_read_u32(ds1307->dev, "aux-voltage-chargeable",
&chargeable)) {
switch (chargeable) {
case 0:
diode = false;
break;
case 1:
diode = true;
break;
default:
dev_warn(ds1307->dev,
"unsupported aux-voltage-chargeable value\n");
break;
}
} else if (device_property_read_bool(ds1307->dev,
"trickle-diode-disable")) {
diode = false;
}
return chip->do_trickle_setup(ds1307, ohms, diode);
}
......@@ -1758,7 +1812,6 @@ static int ds1307_probe(struct i2c_client *client,
trickle_charger_setup = pdata->trickle_charger_setup;
if (trickle_charger_setup && chip->trickle_charger_reg) {
trickle_charger_setup |= DS13XX_TRICKLE_CHARGER_MAGIC;
dev_dbg(ds1307->dev,
"writing trickle charger info 0x%x to 0x%x\n",
trickle_charger_setup, chip->trickle_charger_reg);
......@@ -1881,6 +1934,19 @@ static int ds1307_probe(struct i2c_client *client,
DS1307_REG_HOUR << 4 | 0x08, hour);
}
break;
case ds_1388:
err = regmap_read(ds1307->regmap, DS1388_REG_CONTROL, &tmp);
if (err) {
dev_dbg(ds1307->dev, "read error %d\n", err);
goto exit;
}
/* oscillator off? turn it on, so clock can tick. */
if (tmp & DS1388_BIT_nEOSC) {
tmp &= ~DS1388_BIT_nEOSC;
regmap_write(ds1307->regmap, DS1388_REG_CONTROL, tmp);
}
break;
default:
break;
}
......
......@@ -193,12 +193,12 @@ ds1685_rtc_begin_data_access(struct ds1685_priv *rtc)
rtc->write(rtc, RTC_CTRL_B,
(rtc->read(rtc, RTC_CTRL_B) | RTC_CTRL_B_SET));
/* Switch to Bank 1 */
ds1685_rtc_switch_to_bank1(rtc);
/* Read Ext Ctrl 4A and check the INCR bit to avoid a lockout. */
while (rtc->read(rtc, RTC_EXT_CTRL_4A) & RTC_CTRL_4A_INCR)
cpu_relax();
/* Switch to Bank 1 */
ds1685_rtc_switch_to_bank1(rtc);
}
/**
......@@ -213,7 +213,7 @@ static inline void
ds1685_rtc_end_data_access(struct ds1685_priv *rtc)
{
/* Switch back to Bank 0 */
ds1685_rtc_switch_to_bank1(rtc);
ds1685_rtc_switch_to_bank0(rtc);
/* Clear the SET bit in Ctrl B */
rtc->write(rtc, RTC_CTRL_B,
......
......@@ -3,7 +3,7 @@
* Freescale FlexTimer Module (FTM) alarm device driver.
*
* Copyright 2014 Freescale Semiconductor, Inc.
* Copyright 2019 NXP
* Copyright 2019-2020 NXP
*
*/
......@@ -312,7 +312,7 @@ static const struct of_device_id ftm_rtc_match[] = {
};
static const struct acpi_device_id ftm_imx_acpi_ids[] = {
{"NXP0011",},
{"NXP0014",},
{ }
};
MODULE_DEVICE_TABLE(acpi, ftm_imx_acpi_ids);
......
......@@ -65,7 +65,6 @@ static const struct rtc_class_ops meson_vrtc_ops = {
static int meson_vrtc_probe(struct platform_device *pdev)
{
struct meson_vrtc_data *vrtc;
int ret;
vrtc = devm_kzalloc(&pdev->dev, sizeof(*vrtc), GFP_KERNEL);
if (!vrtc)
......@@ -84,11 +83,7 @@ static int meson_vrtc_probe(struct platform_device *pdev)
return PTR_ERR(vrtc->rtc);
vrtc->rtc->ops = &meson_vrtc_ops;
ret = rtc_register_device(vrtc->rtc);
if (ret)
return ret;
return 0;
return rtc_register_device(vrtc->rtc);
}
static int __maybe_unused meson_vrtc_suspend(struct device *dev)
......
......@@ -31,7 +31,8 @@ static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
MTK_RTC_POLL_DELAY_US,
MTK_RTC_POLL_TIMEOUT);
if (ret < 0)
dev_err(rtc->dev, "failed to write WRTGE: %d\n", ret);
dev_err(rtc->rtc_dev->dev.parent,
"failed to write WRTGR: %d\n", ret);
return ret;
}
......
......@@ -559,7 +559,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
pcf2127->rtc->set_start_time = true; /* Sets actual start to 1970 */
pcf2127->rtc->uie_unsupported = 1;
if (alarm_irq >= 0) {
if (alarm_irq > 0) {
ret = devm_request_threaded_irq(dev, alarm_irq, NULL,
pcf2127_rtc_irq,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
......@@ -570,7 +570,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
}
}
if (alarm_irq >= 0 || device_property_read_bool(dev, "wakeup-source")) {
if (alarm_irq > 0 || device_property_read_bool(dev, "wakeup-source")) {
device_init_wakeup(dev, true);
pcf2127->rtc->ops = &pcf2127_rtc_alrm_ops;
}
......
......@@ -75,8 +75,6 @@ static int r9701_get_datetime(struct device *dev, struct rtc_time *dt)
if (ret)
return ret;
memset(dt, 0, sizeof(*dt));
dt->tm_sec = bcd2bin(buf[0]); /* RSECCNT */
dt->tm_min = bcd2bin(buf[1]); /* RMINCNT */
dt->tm_hour = bcd2bin(buf[2]); /* RHRCNT */
......@@ -85,20 +83,12 @@ static int r9701_get_datetime(struct device *dev, struct rtc_time *dt)
dt->tm_mon = bcd2bin(buf[4]) - 1; /* RMONCNT */
dt->tm_year = bcd2bin(buf[5]) + 100; /* RYRCNT */
/* the rtc device may contain illegal values on power up
* according to the data sheet. make sure they are valid.
*/
return 0;
}
static int r9701_set_datetime(struct device *dev, struct rtc_time *dt)
{
int ret, year;
year = dt->tm_year + 1900;
if (year >= 2100 || year < 2000)
return -EINVAL;
int ret;
ret = write_reg(dev, RHRCNT, bin2bcd(dt->tm_hour));
ret = ret ? ret : write_reg(dev, RMINCNT, bin2bcd(dt->tm_min));
......@@ -106,7 +96,6 @@ static int r9701_set_datetime(struct device *dev, struct rtc_time *dt)
ret = ret ? ret : write_reg(dev, RDAYCNT, bin2bcd(dt->tm_mday));
ret = ret ? ret : write_reg(dev, RMONCNT, bin2bcd(dt->tm_mon + 1));
ret = ret ? ret : write_reg(dev, RYRCNT, bin2bcd(dt->tm_year - 100));
ret = ret ? ret : write_reg(dev, RWKCNT, 1 << dt->tm_wday);
return ret;
}
......@@ -119,7 +108,6 @@ static const struct rtc_class_ops r9701_rtc_ops = {
static int r9701_probe(struct spi_device *spi)
{
struct rtc_device *rtc;
struct rtc_time dt;
unsigned char tmp;
int res;
......@@ -130,35 +118,16 @@ static int r9701_probe(struct spi_device *spi)
return -ENODEV;
}
/*
* The device seems to be present. Now check if the registers
* contain invalid values. If so, try to write a default date:
* 2000/1/1 00:00:00
*/
if (r9701_get_datetime(&spi->dev, &dt)) {
dev_info(&spi->dev, "trying to repair invalid date/time\n");
dt.tm_sec = 0;
dt.tm_min = 0;
dt.tm_hour = 0;
dt.tm_mday = 1;
dt.tm_mon = 0;
dt.tm_year = 100;
if (r9701_set_datetime(&spi->dev, &dt) ||
r9701_get_datetime(&spi->dev, &dt)) {
dev_err(&spi->dev, "cannot repair RTC register\n");
return -ENODEV;
}
}
rtc = devm_rtc_device_register(&spi->dev, "r9701",
&r9701_rtc_ops, THIS_MODULE);
rtc = devm_rtc_allocate_device(&spi->dev);
if (IS_ERR(rtc))
return PTR_ERR(rtc);
spi_set_drvdata(spi, rtc);
rtc->ops = &r9701_rtc_ops;
rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
rtc->range_max = RTC_TIMESTAMP_END_2099;
return 0;
return rtc_register_device(rtc);
}
static struct spi_driver r9701_driver = {
......
......@@ -366,15 +366,15 @@ static const struct rtc_class_ops rs5c313_rtc_ops = {
static int rs5c313_rtc_probe(struct platform_device *pdev)
{
struct rtc_device *rtc = devm_rtc_device_register(&pdev->dev, "rs5c313",
&rs5c313_rtc_ops, THIS_MODULE);
struct rtc_device *rtc;
if (IS_ERR(rtc))
return PTR_ERR(rtc);
rs5c313_init_port();
rs5c313_check_xstp_bit();
platform_set_drvdata(pdev, rtc);
rtc = devm_rtc_device_register(&pdev->dev, "rs5c313", &rs5c313_rtc_ops,
THIS_MODULE);
return 0;
return PTR_ERR_OR_ZERO(rtc);
}
static struct platform_driver rs5c313_rtc_platform_driver = {
......@@ -384,27 +384,7 @@ static struct platform_driver rs5c313_rtc_platform_driver = {
.probe = rs5c313_rtc_probe,
};
static int __init rs5c313_rtc_init(void)
{
int err;
err = platform_driver_register(&rs5c313_rtc_platform_driver);
if (err)
return err;
rs5c313_init_port();
rs5c313_check_xstp_bit();
return 0;
}
static void __exit rs5c313_rtc_exit(void)
{
platform_driver_unregister(&rs5c313_rtc_platform_driver);
}
module_init(rs5c313_rtc_init);
module_exit(rs5c313_rtc_exit);
module_platform_driver(rs5c313_rtc_platform_driver);
MODULE_AUTHOR("kogiidena , Nobuhiro Iwamatsu <iwamatsu@nigauri.org>");
MODULE_DESCRIPTION("Ricoh RS5C313 RTC device driver");
......
......@@ -71,6 +71,7 @@
#define RV3028_EVT_CTRL_TSR BIT(2)
#define RV3028_EEPROM_CMD_UPDATE 0x11
#define RV3028_EEPROM_CMD_WRITE 0x21
#define RV3028_EEPROM_CMD_READ 0x22
......@@ -95,7 +96,7 @@ struct rv3028_data {
#endif
};
static u16 rv3028_trickle_resistors[] = {1000, 3000, 6000, 11000};
static u16 rv3028_trickle_resistors[] = {3000, 5000, 9000, 15000};
static ssize_t timestamp0_store(struct device *dev,
struct device_attribute *attr,
......@@ -171,6 +172,88 @@ static const struct attribute_group rv3028_attr_group = {
.attrs = rv3028_attrs,
};
static int rv3028_exit_eerd(struct rv3028_data *rv3028, u32 eerd)
{
if (eerd)
return 0;
return regmap_update_bits(rv3028->regmap, RV3028_CTRL1, RV3028_CTRL1_EERD, 0);
}
static int rv3028_enter_eerd(struct rv3028_data *rv3028, u32 *eerd)
{
u32 ctrl1, status;
int ret;
ret = regmap_read(rv3028->regmap, RV3028_CTRL1, &ctrl1);
if (ret)
return ret;
*eerd = ctrl1 & RV3028_CTRL1_EERD;
if (*eerd)
return 0;
ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL1,
RV3028_CTRL1_EERD, RV3028_CTRL1_EERD);
if (ret)
return ret;
ret = regmap_read_poll_timeout(rv3028->regmap, RV3028_STATUS, status,
!(status & RV3028_STATUS_EEBUSY),
RV3028_EEBUSY_POLL, RV3028_EEBUSY_TIMEOUT);
if (ret) {
rv3028_exit_eerd(rv3028, *eerd);
return ret;
}
return 0;
}
static int rv3028_update_eeprom(struct rv3028_data *rv3028, u32 eerd)
{
u32 status;
int ret;
ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD, 0x0);
if (ret)
goto exit_eerd;
ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD, RV3028_EEPROM_CMD_UPDATE);
if (ret)
goto exit_eerd;
usleep_range(63000, RV3028_EEBUSY_TIMEOUT);
ret = regmap_read_poll_timeout(rv3028->regmap, RV3028_STATUS, status,
!(status & RV3028_STATUS_EEBUSY),
RV3028_EEBUSY_POLL, RV3028_EEBUSY_TIMEOUT);
exit_eerd:
rv3028_exit_eerd(rv3028, eerd);
return ret;
}
static int rv3028_update_cfg(struct rv3028_data *rv3028, unsigned int reg,
unsigned int mask, unsigned int val)
{
u32 eerd;
int ret;
ret = rv3028_enter_eerd(rv3028, &eerd);
if (ret)
return ret;
ret = regmap_update_bits(rv3028->regmap, reg, mask, val);
if (ret) {
rv3028_exit_eerd(rv3028, eerd);
return ret;
}
return rv3028_update_eeprom(rv3028, eerd);
}
static irqreturn_t rv3028_handle_irq(int irq, void *dev_id)
{
struct rv3028_data *rv3028 = dev_id;
......@@ -404,17 +487,32 @@ static int rv3028_read_offset(struct device *dev, long *offset)
static int rv3028_set_offset(struct device *dev, long offset)
{
struct rv3028_data *rv3028 = dev_get_drvdata(dev);
u32 eerd;
int ret;
offset = clamp(offset, -244141L, 243187L) * 1000;
offset = DIV_ROUND_CLOSEST(offset, OFFSET_STEP_PPT);
ret = rv3028_enter_eerd(rv3028, &eerd);
if (ret)
return ret;
ret = regmap_write(rv3028->regmap, RV3028_OFFSET, offset >> 1);
if (ret < 0)
return ret;
goto exit_eerd;
ret = regmap_update_bits(rv3028->regmap, RV3028_BACKUP, BIT(7),
offset << 7);
if (ret < 0)
goto exit_eerd;
return rv3028_update_eeprom(rv3028, eerd);
exit_eerd:
rv3028_exit_eerd(rv3028, eerd);
return ret;
return regmap_update_bits(rv3028->regmap, RV3028_BACKUP, BIT(7),
offset << 7);
}
static int rv3028_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
......@@ -451,49 +549,36 @@ static int rv3028_nvram_read(void *priv, unsigned int offset, void *val,
static int rv3028_eeprom_write(void *priv, unsigned int offset, void *val,
size_t bytes)
{
u32 status, ctrl1;
int i, ret, err;
struct rv3028_data *rv3028 = priv;
u32 status, eerd;
int i, ret;
u8 *buf = val;
ret = regmap_read(priv, RV3028_CTRL1, &ctrl1);
ret = rv3028_enter_eerd(rv3028, &eerd);
if (ret)
return ret;
if (!(ctrl1 & RV3028_CTRL1_EERD)) {
ret = regmap_update_bits(priv, RV3028_CTRL1,
RV3028_CTRL1_EERD, RV3028_CTRL1_EERD);
if (ret)
return ret;
ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status,
!(status & RV3028_STATUS_EEBUSY),
RV3028_EEBUSY_POLL,
RV3028_EEBUSY_TIMEOUT);
if (ret)
goto restore_eerd;
}
for (i = 0; i < bytes; i++) {
ret = regmap_write(priv, RV3028_EEPROM_ADDR, offset + i);
ret = regmap_write(rv3028->regmap, RV3028_EEPROM_ADDR, offset + i);
if (ret)
goto restore_eerd;
ret = regmap_write(priv, RV3028_EEPROM_DATA, buf[i]);
ret = regmap_write(rv3028->regmap, RV3028_EEPROM_DATA, buf[i]);
if (ret)
goto restore_eerd;
ret = regmap_write(priv, RV3028_EEPROM_CMD, 0x0);
ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD, 0x0);
if (ret)
goto restore_eerd;
ret = regmap_write(priv, RV3028_EEPROM_CMD,
ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD,
RV3028_EEPROM_CMD_WRITE);
if (ret)
goto restore_eerd;
usleep_range(RV3028_EEBUSY_POLL, RV3028_EEBUSY_TIMEOUT);
ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status,
ret = regmap_read_poll_timeout(rv3028->regmap, RV3028_STATUS, status,
!(status & RV3028_STATUS_EEBUSY),
RV3028_EEBUSY_POLL,
RV3028_EEBUSY_TIMEOUT);
......@@ -502,13 +587,7 @@ static int rv3028_eeprom_write(void *priv, unsigned int offset, void *val,
}
restore_eerd:
if (!(ctrl1 & RV3028_CTRL1_EERD))
{
err = regmap_update_bits(priv, RV3028_CTRL1, RV3028_CTRL1_EERD,
0);
if (err && !ret)
ret = err;
}
rv3028_exit_eerd(rv3028, eerd);
return ret;
}
......@@ -516,63 +595,44 @@ static int rv3028_eeprom_write(void *priv, unsigned int offset, void *val,
static int rv3028_eeprom_read(void *priv, unsigned int offset, void *val,
size_t bytes)
{
u32 status, ctrl1, data;
int i, ret, err;
struct rv3028_data *rv3028 = priv;
u32 status, eerd, data;
int i, ret;
u8 *buf = val;
ret = regmap_read(priv, RV3028_CTRL1, &ctrl1);
ret = rv3028_enter_eerd(rv3028, &eerd);
if (ret)
return ret;
if (!(ctrl1 & RV3028_CTRL1_EERD)) {
ret = regmap_update_bits(priv, RV3028_CTRL1,
RV3028_CTRL1_EERD, RV3028_CTRL1_EERD);
if (ret)
return ret;
ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status,
!(status & RV3028_STATUS_EEBUSY),
RV3028_EEBUSY_POLL,
RV3028_EEBUSY_TIMEOUT);
if (ret)
goto restore_eerd;
}
for (i = 0; i < bytes; i++) {
ret = regmap_write(priv, RV3028_EEPROM_ADDR, offset + i);
ret = regmap_write(rv3028->regmap, RV3028_EEPROM_ADDR, offset + i);
if (ret)
goto restore_eerd;
ret = regmap_write(priv, RV3028_EEPROM_CMD, 0x0);
ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD, 0x0);
if (ret)
goto restore_eerd;
ret = regmap_write(priv, RV3028_EEPROM_CMD,
ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD,
RV3028_EEPROM_CMD_READ);
if (ret)
goto restore_eerd;
ret = regmap_read_poll_timeout(priv, RV3028_STATUS, status,
ret = regmap_read_poll_timeout(rv3028->regmap, RV3028_STATUS, status,
!(status & RV3028_STATUS_EEBUSY),
RV3028_EEBUSY_POLL,
RV3028_EEBUSY_TIMEOUT);
if (ret)
goto restore_eerd;
ret = regmap_read(priv, RV3028_EEPROM_DATA, &data);
ret = regmap_read(rv3028->regmap, RV3028_EEPROM_DATA, &data);
if (ret)
goto restore_eerd;
buf[i] = data;
}
restore_eerd:
if (!(ctrl1 & RV3028_CTRL1_EERD))
{
err = regmap_update_bits(priv, RV3028_CTRL1, RV3028_CTRL1_EERD,
0);
if (err && !ret)
ret = err;
}
rv3028_exit_eerd(rv3028, eerd);
return ret;
}
......@@ -619,24 +679,23 @@ static int rv3028_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
int i, ret;
u32 enabled;
struct rv3028_data *rv3028 = clkout_hw_to_rv3028(hw);
ret = regmap_read(rv3028->regmap, RV3028_CLKOUT, &enabled);
if (ret < 0)
return ret;
ret = regmap_write(rv3028->regmap, RV3028_CLKOUT, 0x0);
if (ret < 0)
return ret;
for (i = 0; i < ARRAY_SIZE(clkout_rates); i++) {
if (clkout_rates[i] == rate) {
ret = regmap_update_bits(rv3028->regmap,
RV3028_CLKOUT,
RV3028_CLKOUT_FD_MASK, i);
if (ret < 0)
return ret;
enabled &= RV3028_CLKOUT_CLKOE;
return regmap_write(rv3028->regmap, RV3028_CLKOUT,
RV3028_CLKOUT_CLKSY | RV3028_CLKOUT_CLKOE);
}
}
for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
if (clkout_rates[i] == rate)
return rv3028_update_cfg(rv3028, RV3028_CLKOUT, 0xff,
RV3028_CLKOUT_CLKSY | enabled | i);
return -EINVAL;
}
......@@ -811,10 +870,8 @@ static int rv3028_probe(struct i2c_client *client)
break;
if (i < ARRAY_SIZE(rv3028_trickle_resistors)) {
ret = regmap_update_bits(rv3028->regmap, RV3028_BACKUP,
RV3028_BACKUP_TCE |
RV3028_BACKUP_TCR_MASK,
RV3028_BACKUP_TCE | i);
ret = rv3028_update_cfg(rv3028, RV3028_BACKUP, RV3028_BACKUP_TCE |
RV3028_BACKUP_TCR_MASK, RV3028_BACKUP_TCE | i);
if (ret)
return ret;
} else {
......@@ -835,7 +892,7 @@ static int rv3028_probe(struct i2c_client *client)
nvmem_cfg.priv = rv3028->regmap;
rtc_nvmem_register(rv3028->rtc, &nvmem_cfg);
eeprom_cfg.priv = rv3028->regmap;
eeprom_cfg.priv = rv3028;
rtc_nvmem_register(rv3028->rtc, &eeprom_cfg);
rv3028->rtc->max_user_freq = 1;
......
// SPDX-License-Identifier: GPL-2.0
/*
* RTC driver for the Micro Crystal RV3032
*
* Copyright (C) 2020 Micro Crystal SA
*
* Alexandre Belloni <alexandre.belloni@bootlin.com>
*
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/bcd.h>
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/hwmon.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/log2.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/rtc.h>
#define RV3032_SEC 0x01
#define RV3032_MIN 0x02
#define RV3032_HOUR 0x03
#define RV3032_WDAY 0x04
#define RV3032_DAY 0x05
#define RV3032_MONTH 0x06
#define RV3032_YEAR 0x07
#define RV3032_ALARM_MIN 0x08
#define RV3032_ALARM_HOUR 0x09
#define RV3032_ALARM_DAY 0x0A
#define RV3032_STATUS 0x0D
#define RV3032_TLSB 0x0E
#define RV3032_TMSB 0x0F
#define RV3032_CTRL1 0x10
#define RV3032_CTRL2 0x11
#define RV3032_CTRL3 0x12
#define RV3032_TS_CTRL 0x13
#define RV3032_CLK_IRQ 0x14
#define RV3032_EEPROM_ADDR 0x3D
#define RV3032_EEPROM_DATA 0x3E
#define RV3032_EEPROM_CMD 0x3F
#define RV3032_RAM1 0x40
#define RV3032_PMU 0xC0
#define RV3032_OFFSET 0xC1
#define RV3032_CLKOUT1 0xC2
#define RV3032_CLKOUT2 0xC3
#define RV3032_TREF0 0xC4
#define RV3032_TREF1 0xC5
#define RV3032_STATUS_VLF BIT(0)
#define RV3032_STATUS_PORF BIT(1)
#define RV3032_STATUS_EVF BIT(2)
#define RV3032_STATUS_AF BIT(3)
#define RV3032_STATUS_TF BIT(4)
#define RV3032_STATUS_UF BIT(5)
#define RV3032_STATUS_TLF BIT(6)
#define RV3032_STATUS_THF BIT(7)
#define RV3032_TLSB_CLKF BIT(1)
#define RV3032_TLSB_EEBUSY BIT(2)
#define RV3032_TLSB_TEMP GENMASK(7, 4)
#define RV3032_CLKOUT2_HFD_MSK GENMASK(4, 0)
#define RV3032_CLKOUT2_FD_MSK GENMASK(6, 5)
#define RV3032_CLKOUT2_OS BIT(7)
#define RV3032_CTRL1_EERD BIT(3)
#define RV3032_CTRL1_WADA BIT(5)
#define RV3032_CTRL2_STOP BIT(0)
#define RV3032_CTRL2_EIE BIT(2)
#define RV3032_CTRL2_AIE BIT(3)
#define RV3032_CTRL2_TIE BIT(4)
#define RV3032_CTRL2_UIE BIT(5)
#define RV3032_CTRL2_CLKIE BIT(6)
#define RV3032_CTRL2_TSE BIT(7)
#define RV3032_PMU_TCM GENMASK(1, 0)
#define RV3032_PMU_TCR GENMASK(3, 2)
#define RV3032_PMU_BSM GENMASK(5, 4)
#define RV3032_PMU_NCLKE BIT(6)
#define RV3032_PMU_BSM_DSM 1
#define RV3032_PMU_BSM_LSM 2
#define RV3032_OFFSET_MSK GENMASK(5, 0)
#define RV3032_EVT_CTRL_TSR BIT(2)
#define RV3032_EEPROM_CMD_UPDATE 0x11
#define RV3032_EEPROM_CMD_WRITE 0x21
#define RV3032_EEPROM_CMD_READ 0x22
#define RV3032_EEPROM_USER 0xCB
#define RV3032_EEBUSY_POLL 10000
#define RV3032_EEBUSY_TIMEOUT 100000
#define OFFSET_STEP_PPT 238419
struct rv3032_data {
struct regmap *regmap;
struct rtc_device *rtc;
#ifdef CONFIG_COMMON_CLK
struct clk_hw clkout_hw;
#endif
};
static u16 rv3032_trickle_resistors[] = {1000, 2000, 7000, 11000};
static u16 rv3032_trickle_voltages[] = {0, 1750, 3000, 4400};
static int rv3032_exit_eerd(struct rv3032_data *rv3032, u32 eerd)
{
if (eerd)
return 0;
return regmap_update_bits(rv3032->regmap, RV3032_CTRL1, RV3032_CTRL1_EERD, 0);
}
static int rv3032_enter_eerd(struct rv3032_data *rv3032, u32 *eerd)
{
u32 ctrl1, status;
int ret;
ret = regmap_read(rv3032->regmap, RV3032_CTRL1, &ctrl1);
if (ret)
return ret;
*eerd = ctrl1 & RV3032_CTRL1_EERD;
if (*eerd)
return 0;
ret = regmap_update_bits(rv3032->regmap, RV3032_CTRL1,
RV3032_CTRL1_EERD, RV3032_CTRL1_EERD);
if (ret)
return ret;
ret = regmap_read_poll_timeout(rv3032->regmap, RV3032_TLSB, status,
!(status & RV3032_TLSB_EEBUSY),
RV3032_EEBUSY_POLL, RV3032_EEBUSY_TIMEOUT);
if (ret) {
rv3032_exit_eerd(rv3032, *eerd);
return ret;
}
return 0;
}
static int rv3032_update_cfg(struct rv3032_data *rv3032, unsigned int reg,
unsigned int mask, unsigned int val)
{
u32 status, eerd;
int ret;
ret = rv3032_enter_eerd(rv3032, &eerd);
if (ret)
return ret;
ret = regmap_update_bits(rv3032->regmap, reg, mask, val);
if (ret)
goto exit_eerd;
ret = regmap_write(rv3032->regmap, RV3032_EEPROM_CMD, RV3032_EEPROM_CMD_UPDATE);
if (ret)
goto exit_eerd;
usleep_range(46000, RV3032_EEBUSY_TIMEOUT);
ret = regmap_read_poll_timeout(rv3032->regmap, RV3032_TLSB, status,
!(status & RV3032_TLSB_EEBUSY),
RV3032_EEBUSY_POLL, RV3032_EEBUSY_TIMEOUT);
exit_eerd:
rv3032_exit_eerd(rv3032, eerd);
return ret;
}
static irqreturn_t rv3032_handle_irq(int irq, void *dev_id)
{
struct rv3032_data *rv3032 = dev_id;
unsigned long events = 0;
u32 status = 0, ctrl = 0;
if (regmap_read(rv3032->regmap, RV3032_STATUS, &status) < 0 ||
status == 0) {
return IRQ_NONE;
}
if (status & RV3032_STATUS_TF) {
status |= RV3032_STATUS_TF;
ctrl |= RV3032_CTRL2_TIE;
events |= RTC_PF;
}
if (status & RV3032_STATUS_AF) {
status |= RV3032_STATUS_AF;
ctrl |= RV3032_CTRL2_AIE;
events |= RTC_AF;
}
if (status & RV3032_STATUS_UF) {
status |= RV3032_STATUS_UF;
ctrl |= RV3032_CTRL2_UIE;
events |= RTC_UF;
}
if (events) {
rtc_update_irq(rv3032->rtc, 1, events);
regmap_update_bits(rv3032->regmap, RV3032_STATUS, status, 0);
regmap_update_bits(rv3032->regmap, RV3032_CTRL2, ctrl, 0);
}
return IRQ_HANDLED;
}
static int rv3032_get_time(struct device *dev, struct rtc_time *tm)
{
struct rv3032_data *rv3032 = dev_get_drvdata(dev);
u8 date[7];
int ret, status;
ret = regmap_read(rv3032->regmap, RV3032_STATUS, &status);
if (ret < 0)
return ret;
if (status & (RV3032_STATUS_PORF | RV3032_STATUS_VLF))
return -EINVAL;
ret = regmap_bulk_read(rv3032->regmap, RV3032_SEC, date, sizeof(date));
if (ret)
return ret;
tm->tm_sec = bcd2bin(date[0] & 0x7f);
tm->tm_min = bcd2bin(date[1] & 0x7f);
tm->tm_hour = bcd2bin(date[2] & 0x3f);
tm->tm_wday = date[3] & 0x7;
tm->tm_mday = bcd2bin(date[4] & 0x3f);
tm->tm_mon = bcd2bin(date[5] & 0x1f) - 1;
tm->tm_year = bcd2bin(date[6]) + 100;
return 0;
}
static int rv3032_set_time(struct device *dev, struct rtc_time *tm)
{
struct rv3032_data *rv3032 = dev_get_drvdata(dev);
u8 date[7];
int ret;
date[0] = bin2bcd(tm->tm_sec);
date[1] = bin2bcd(tm->tm_min);
date[2] = bin2bcd(tm->tm_hour);
date[3] = tm->tm_wday;
date[4] = bin2bcd(tm->tm_mday);
date[5] = bin2bcd(tm->tm_mon + 1);
date[6] = bin2bcd(tm->tm_year - 100);
ret = regmap_bulk_write(rv3032->regmap, RV3032_SEC, date,
sizeof(date));
if (ret)
return ret;
ret = regmap_update_bits(rv3032->regmap, RV3032_STATUS,
RV3032_STATUS_PORF | RV3032_STATUS_VLF, 0);
return ret;
}
static int rv3032_get_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct rv3032_data *rv3032 = dev_get_drvdata(dev);
u8 alarmvals[3];
int status, ctrl, ret;
ret = regmap_bulk_read(rv3032->regmap, RV3032_ALARM_MIN, alarmvals,
sizeof(alarmvals));
if (ret)
return ret;
ret = regmap_read(rv3032->regmap, RV3032_STATUS, &status);
if (ret < 0)
return ret;
ret = regmap_read(rv3032->regmap, RV3032_CTRL2, &ctrl);
if (ret < 0)
return ret;
alrm->time.tm_sec = 0;
alrm->time.tm_min = bcd2bin(alarmvals[0] & 0x7f);
alrm->time.tm_hour = bcd2bin(alarmvals[1] & 0x3f);
alrm->time.tm_mday = bcd2bin(alarmvals[2] & 0x3f);
alrm->enabled = !!(ctrl & RV3032_CTRL2_AIE);
alrm->pending = (status & RV3032_STATUS_AF) && alrm->enabled;
return 0;
}
static int rv3032_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct rv3032_data *rv3032 = dev_get_drvdata(dev);
u8 alarmvals[3];
u8 ctrl = 0;
int ret;
/* The alarm has no seconds, round up to nearest minute */
if (alrm->time.tm_sec) {
time64_t alarm_time = rtc_tm_to_time64(&alrm->time);
alarm_time += 60 - alrm->time.tm_sec;
rtc_time64_to_tm(alarm_time, &alrm->time);
}
ret = regmap_update_bits(rv3032->regmap, RV3032_CTRL2,
RV3032_CTRL2_AIE | RV3032_CTRL2_UIE, 0);
if (ret)
return ret;
alarmvals[0] = bin2bcd(alrm->time.tm_min);
alarmvals[1] = bin2bcd(alrm->time.tm_hour);
alarmvals[2] = bin2bcd(alrm->time.tm_mday);
ret = regmap_update_bits(rv3032->regmap, RV3032_STATUS,
RV3032_STATUS_AF, 0);
if (ret)
return ret;
ret = regmap_bulk_write(rv3032->regmap, RV3032_ALARM_MIN, alarmvals,
sizeof(alarmvals));
if (ret)
return ret;
if (alrm->enabled) {
if (rv3032->rtc->uie_rtctimer.enabled)
ctrl |= RV3032_CTRL2_UIE;
if (rv3032->rtc->aie_timer.enabled)
ctrl |= RV3032_CTRL2_AIE;
}
ret = regmap_update_bits(rv3032->regmap, RV3032_CTRL2,
RV3032_CTRL2_UIE | RV3032_CTRL2_AIE, ctrl);
return ret;
}
static int rv3032_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
struct rv3032_data *rv3032 = dev_get_drvdata(dev);
int ctrl = 0, ret;
if (enabled) {
if (rv3032->rtc->uie_rtctimer.enabled)
ctrl |= RV3032_CTRL2_UIE;
if (rv3032->rtc->aie_timer.enabled)
ctrl |= RV3032_CTRL2_AIE;
}
ret = regmap_update_bits(rv3032->regmap, RV3032_STATUS,
RV3032_STATUS_AF | RV3032_STATUS_UF, 0);
if (ret)
return ret;
ret = regmap_update_bits(rv3032->regmap, RV3032_CTRL2,
RV3032_CTRL2_UIE | RV3032_CTRL2_AIE, ctrl);
if (ret)
return ret;
return 0;
}
static int rv3032_read_offset(struct device *dev, long *offset)
{
struct rv3032_data *rv3032 = dev_get_drvdata(dev);
int ret, value, steps;
ret = regmap_read(rv3032->regmap, RV3032_OFFSET, &value);
if (ret < 0)
return ret;
steps = sign_extend32(FIELD_GET(RV3032_OFFSET_MSK, value), 5);
*offset = DIV_ROUND_CLOSEST(steps * OFFSET_STEP_PPT, 1000);
return 0;
}
static int rv3032_set_offset(struct device *dev, long offset)
{
struct rv3032_data *rv3032 = dev_get_drvdata(dev);
offset = clamp(offset, -7629L, 7391L) * 1000;
offset = DIV_ROUND_CLOSEST(offset, OFFSET_STEP_PPT);
return rv3032_update_cfg(rv3032, RV3032_OFFSET, RV3032_OFFSET_MSK,
FIELD_PREP(RV3032_OFFSET_MSK, offset));
}
static int rv3032_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
{
struct rv3032_data *rv3032 = dev_get_drvdata(dev);
int status, val = 0, ret = 0;
switch (cmd) {
case RTC_VL_READ:
ret = regmap_read(rv3032->regmap, RV3032_STATUS, &status);
if (ret < 0)
return ret;
if (status & (RV3032_STATUS_PORF | RV3032_STATUS_VLF))
val = RTC_VL_DATA_INVALID;
return put_user(val, (unsigned int __user *)arg);
default:
return -ENOIOCTLCMD;
}
}
static int rv3032_nvram_write(void *priv, unsigned int offset, void *val, size_t bytes)
{
return regmap_bulk_write(priv, RV3032_RAM1 + offset, val, bytes);
}
static int rv3032_nvram_read(void *priv, unsigned int offset, void *val, size_t bytes)
{
return regmap_bulk_read(priv, RV3032_RAM1 + offset, val, bytes);
}
static int rv3032_eeprom_write(void *priv, unsigned int offset, void *val, size_t bytes)
{
struct rv3032_data *rv3032 = priv;
u32 status, eerd;
int i, ret;
u8 *buf = val;
ret = rv3032_enter_eerd(rv3032, &eerd);
if (ret)
return ret;
for (i = 0; i < bytes; i++) {
ret = regmap_write(rv3032->regmap, RV3032_EEPROM_ADDR,
RV3032_EEPROM_USER + offset + i);
if (ret)
goto exit_eerd;
ret = regmap_write(rv3032->regmap, RV3032_EEPROM_DATA, buf[i]);
if (ret)
goto exit_eerd;
ret = regmap_write(rv3032->regmap, RV3032_EEPROM_CMD,
RV3032_EEPROM_CMD_WRITE);
if (ret)
goto exit_eerd;
usleep_range(RV3032_EEBUSY_POLL, RV3032_EEBUSY_TIMEOUT);
ret = regmap_read_poll_timeout(rv3032->regmap, RV3032_TLSB, status,
!(status & RV3032_TLSB_EEBUSY),
RV3032_EEBUSY_POLL, RV3032_EEBUSY_TIMEOUT);
if (ret)
goto exit_eerd;
}
exit_eerd:
rv3032_exit_eerd(rv3032, eerd);
return ret;
}
static int rv3032_eeprom_read(void *priv, unsigned int offset, void *val, size_t bytes)
{
struct rv3032_data *rv3032 = priv;
u32 status, eerd, data;
int i, ret;
u8 *buf = val;
ret = rv3032_enter_eerd(rv3032, &eerd);
if (ret)
return ret;
for (i = 0; i < bytes; i++) {
ret = regmap_write(rv3032->regmap, RV3032_EEPROM_ADDR,
RV3032_EEPROM_USER + offset + i);
if (ret)
goto exit_eerd;
ret = regmap_write(rv3032->regmap, RV3032_EEPROM_CMD,
RV3032_EEPROM_CMD_READ);
if (ret)
goto exit_eerd;
ret = regmap_read_poll_timeout(rv3032->regmap, RV3032_TLSB, status,
!(status & RV3032_TLSB_EEBUSY),
RV3032_EEBUSY_POLL, RV3032_EEBUSY_TIMEOUT);
if (ret)
goto exit_eerd;
ret = regmap_read(rv3032->regmap, RV3032_EEPROM_DATA, &data);
if (ret)
goto exit_eerd;
buf[i] = data;
}
exit_eerd:
rv3032_exit_eerd(rv3032, eerd);
return ret;
}
static int rv3032_trickle_charger_setup(struct device *dev, struct rv3032_data *rv3032)
{
u32 val, ohms, voltage;
int i;
val = FIELD_PREP(RV3032_PMU_TCM, 1) | FIELD_PREP(RV3032_PMU_BSM, RV3032_PMU_BSM_DSM);
if (!device_property_read_u32(dev, "trickle-voltage-millivolt", &voltage)) {
for (i = 0; i < ARRAY_SIZE(rv3032_trickle_voltages); i++)
if (voltage == rv3032_trickle_voltages[i])
break;
if (i < ARRAY_SIZE(rv3032_trickle_voltages))
val = FIELD_PREP(RV3032_PMU_TCM, i) |
FIELD_PREP(RV3032_PMU_BSM, RV3032_PMU_BSM_LSM);
}
if (device_property_read_u32(dev, "trickle-resistor-ohms", &ohms))
return 0;
for (i = 0; i < ARRAY_SIZE(rv3032_trickle_resistors); i++)
if (ohms == rv3032_trickle_resistors[i])
break;
if (i >= ARRAY_SIZE(rv3032_trickle_resistors)) {
dev_warn(dev, "invalid trickle resistor value\n");
return 0;
}
return rv3032_update_cfg(rv3032, RV3032_PMU,
RV3032_PMU_TCR | RV3032_PMU_TCM | RV3032_PMU_BSM,
val | FIELD_PREP(RV3032_PMU_TCR, i));
}
#ifdef CONFIG_COMMON_CLK
#define clkout_hw_to_rv3032(hw) container_of(hw, struct rv3032_data, clkout_hw)
static int clkout_xtal_rates[] = {
32768,
1024,
64,
1,
};
#define RV3032_HFD_STEP 8192
static unsigned long rv3032_clkout_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
int clkout, ret;
struct rv3032_data *rv3032 = clkout_hw_to_rv3032(hw);
ret = regmap_read(rv3032->regmap, RV3032_CLKOUT2, &clkout);
if (ret < 0)
return 0;
if (clkout & RV3032_CLKOUT2_OS) {
unsigned long rate = FIELD_GET(RV3032_CLKOUT2_HFD_MSK, clkout) << 8;
ret = regmap_read(rv3032->regmap, RV3032_CLKOUT1, &clkout);
if (ret < 0)
return 0;
rate += clkout + 1;
return rate * RV3032_HFD_STEP;
}
return clkout_xtal_rates[FIELD_GET(RV3032_CLKOUT2_FD_MSK, clkout)];
}
static long rv3032_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
int i, hfd;
if (rate < RV3032_HFD_STEP)
for (i = 0; i < ARRAY_SIZE(clkout_xtal_rates); i++)
if (clkout_xtal_rates[i] <= rate)
return clkout_xtal_rates[i];
hfd = DIV_ROUND_CLOSEST(rate, RV3032_HFD_STEP);
return RV3032_HFD_STEP * clamp(hfd, 0, 8192);
}
static int rv3032_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct rv3032_data *rv3032 = clkout_hw_to_rv3032(hw);
u32 status, eerd;
int i, hfd, ret;
for (i = 0; i < ARRAY_SIZE(clkout_xtal_rates); i++) {
if (clkout_xtal_rates[i] == rate) {
return rv3032_update_cfg(rv3032, RV3032_CLKOUT2, 0xff,
FIELD_PREP(RV3032_CLKOUT2_FD_MSK, i));
}
}
hfd = DIV_ROUND_CLOSEST(rate, RV3032_HFD_STEP);
hfd = clamp(hfd, 1, 8192) - 1;
ret = rv3032_enter_eerd(rv3032, &eerd);
if (ret)
goto exit_eerd;
ret = regmap_write(rv3032->regmap, RV3032_CLKOUT1, hfd & 0xff);
if (ret)
return ret;
ret = regmap_write(rv3032->regmap, RV3032_CLKOUT2, RV3032_CLKOUT2_OS |
FIELD_PREP(RV3032_CLKOUT2_HFD_MSK, hfd >> 8));
if (ret)
goto exit_eerd;
ret = regmap_write(rv3032->regmap, RV3032_EEPROM_CMD, RV3032_EEPROM_CMD_UPDATE);
if (ret)
goto exit_eerd;
usleep_range(46000, RV3032_EEBUSY_TIMEOUT);
ret = regmap_read_poll_timeout(rv3032->regmap, RV3032_TLSB, status,
!(status & RV3032_TLSB_EEBUSY),
RV3032_EEBUSY_POLL, RV3032_EEBUSY_TIMEOUT);
exit_eerd:
rv3032_exit_eerd(rv3032, eerd);
return ret;
}
static int rv3032_clkout_prepare(struct clk_hw *hw)
{
struct rv3032_data *rv3032 = clkout_hw_to_rv3032(hw);
return rv3032_update_cfg(rv3032, RV3032_PMU, RV3032_PMU_NCLKE, 0);
}
static void rv3032_clkout_unprepare(struct clk_hw *hw)
{
struct rv3032_data *rv3032 = clkout_hw_to_rv3032(hw);
rv3032_update_cfg(rv3032, RV3032_PMU, RV3032_PMU_NCLKE, RV3032_PMU_NCLKE);
}
static int rv3032_clkout_is_prepared(struct clk_hw *hw)
{
int val, ret;
struct rv3032_data *rv3032 = clkout_hw_to_rv3032(hw);
ret = regmap_read(rv3032->regmap, RV3032_PMU, &val);
if (ret < 0)
return ret;
return !(val & RV3032_PMU_NCLKE);
}
static const struct clk_ops rv3032_clkout_ops = {
.prepare = rv3032_clkout_prepare,
.unprepare = rv3032_clkout_unprepare,
.is_prepared = rv3032_clkout_is_prepared,
.recalc_rate = rv3032_clkout_recalc_rate,
.round_rate = rv3032_clkout_round_rate,
.set_rate = rv3032_clkout_set_rate,
};
static int rv3032_clkout_register_clk(struct rv3032_data *rv3032,
struct i2c_client *client)
{
int ret;
struct clk *clk;
struct clk_init_data init;
struct device_node *node = client->dev.of_node;
ret = regmap_update_bits(rv3032->regmap, RV3032_TLSB, RV3032_TLSB_CLKF, 0);
if (ret < 0)
return ret;
ret = regmap_update_bits(rv3032->regmap, RV3032_CTRL2, RV3032_CTRL2_CLKIE, 0);
if (ret < 0)
return ret;
ret = regmap_write(rv3032->regmap, RV3032_CLK_IRQ, 0);
if (ret < 0)
return ret;
init.name = "rv3032-clkout";
init.ops = &rv3032_clkout_ops;
init.flags = 0;
init.parent_names = NULL;
init.num_parents = 0;
rv3032->clkout_hw.init = &init;
of_property_read_string(node, "clock-output-names", &init.name);
clk = devm_clk_register(&client->dev, &rv3032->clkout_hw);
if (!IS_ERR(clk))
of_clk_add_provider(node, of_clk_src_simple_get, clk);
return 0;
}
#endif
static int rv3032_hwmon_read_temp(struct device *dev, long *mC)
{
struct rv3032_data *rv3032 = dev_get_drvdata(dev);
u8 buf[2];
int temp, prev = 0;
int ret;
ret = regmap_bulk_read(rv3032->regmap, RV3032_TLSB, buf, sizeof(buf));
if (ret)
return ret;
temp = sign_extend32(buf[1], 7) << 4;
temp |= FIELD_GET(RV3032_TLSB_TEMP, buf[0]);
/* No blocking or shadowing on RV3032_TLSB and RV3032_TMSB */
do {
prev = temp;
ret = regmap_bulk_read(rv3032->regmap, RV3032_TLSB, buf, sizeof(buf));
if (ret)
return ret;
temp = sign_extend32(buf[1], 7) << 4;
temp |= FIELD_GET(RV3032_TLSB_TEMP, buf[0]);
} while (temp != prev);
*mC = (temp * 1000) / 16;
return 0;
}
static umode_t rv3032_hwmon_is_visible(const void *data, enum hwmon_sensor_types type,
u32 attr, int channel)
{
if (type != hwmon_temp)
return 0;
switch (attr) {
case hwmon_temp_input:
return 0444;
default:
return 0;
}
}
static int rv3032_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long *temp)
{
int err;
switch (attr) {
case hwmon_temp_input:
err = rv3032_hwmon_read_temp(dev, temp);
break;
default:
err = -EOPNOTSUPP;
break;
}
return err;
}
static const struct hwmon_channel_info *rv3032_hwmon_info[] = {
HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST),
NULL
};
static const struct hwmon_ops rv3032_hwmon_hwmon_ops = {
.is_visible = rv3032_hwmon_is_visible,
.read = rv3032_hwmon_read,
};
static const struct hwmon_chip_info rv3032_hwmon_chip_info = {
.ops = &rv3032_hwmon_hwmon_ops,
.info = rv3032_hwmon_info,
};
static void rv3032_hwmon_register(struct device *dev)
{
struct rv3032_data *rv3032 = dev_get_drvdata(dev);
if (!IS_REACHABLE(CONFIG_HWMON))
return;
devm_hwmon_device_register_with_info(dev, "rv3032", rv3032, &rv3032_hwmon_chip_info, NULL);
}
static struct rtc_class_ops rv3032_rtc_ops = {
.read_time = rv3032_get_time,
.set_time = rv3032_set_time,
.read_offset = rv3032_read_offset,
.set_offset = rv3032_set_offset,
.ioctl = rv3032_ioctl,
};
static const struct regmap_config regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = 0xCA,
};
static int rv3032_probe(struct i2c_client *client)
{
struct rv3032_data *rv3032;
int ret, status;
struct nvmem_config nvmem_cfg = {
.name = "rv3032_nvram",
.word_size = 1,
.stride = 1,
.size = 16,
.type = NVMEM_TYPE_BATTERY_BACKED,
.reg_read = rv3032_nvram_read,
.reg_write = rv3032_nvram_write,
};
struct nvmem_config eeprom_cfg = {
.name = "rv3032_eeprom",
.word_size = 1,
.stride = 1,
.size = 32,
.type = NVMEM_TYPE_EEPROM,
.reg_read = rv3032_eeprom_read,
.reg_write = rv3032_eeprom_write,
};
rv3032 = devm_kzalloc(&client->dev, sizeof(struct rv3032_data),
GFP_KERNEL);
if (!rv3032)
return -ENOMEM;
rv3032->regmap = devm_regmap_init_i2c(client, &regmap_config);
if (IS_ERR(rv3032->regmap))
return PTR_ERR(rv3032->regmap);
i2c_set_clientdata(client, rv3032);
ret = regmap_read(rv3032->regmap, RV3032_STATUS, &status);
if (ret < 0)
return ret;
rv3032->rtc = devm_rtc_allocate_device(&client->dev);
if (IS_ERR(rv3032->rtc))
return PTR_ERR(rv3032->rtc);
if (client->irq > 0) {
ret = devm_request_threaded_irq(&client->dev, client->irq,
NULL, rv3032_handle_irq,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
"rv3032", rv3032);
if (ret) {
dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n");
client->irq = 0;
} else {
rv3032_rtc_ops.read_alarm = rv3032_get_alarm;
rv3032_rtc_ops.set_alarm = rv3032_set_alarm;
rv3032_rtc_ops.alarm_irq_enable = rv3032_alarm_irq_enable;
}
}
ret = regmap_update_bits(rv3032->regmap, RV3032_CTRL1,
RV3032_CTRL1_WADA, RV3032_CTRL1_WADA);
if (ret)
return ret;
rv3032_trickle_charger_setup(&client->dev, rv3032);
rv3032->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
rv3032->rtc->range_max = RTC_TIMESTAMP_END_2099;
rv3032->rtc->ops = &rv3032_rtc_ops;
ret = rtc_register_device(rv3032->rtc);
if (ret)
return ret;
nvmem_cfg.priv = rv3032;
rtc_nvmem_register(rv3032->rtc, &nvmem_cfg);
eeprom_cfg.priv = rv3032;
rtc_nvmem_register(rv3032->rtc, &eeprom_cfg);
rv3032->rtc->max_user_freq = 1;
#ifdef CONFIG_COMMON_CLK
rv3032_clkout_register_clk(rv3032, client);
#endif
rv3032_hwmon_register(&client->dev);
return 0;
}
static const struct of_device_id rv3032_of_match[] = {
{ .compatible = "microcrystal,rv3032", },
{ }
};
MODULE_DEVICE_TABLE(of, rv3032_of_match);
static struct i2c_driver rv3032_driver = {
.driver = {
.name = "rtc-rv3032",
.of_match_table = of_match_ptr(rv3032_of_match),
},
.probe_new = rv3032_probe,
};
module_i2c_driver(rv3032_driver);
MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@bootlin.com>");
MODULE_DESCRIPTION("Micro Crystal RV3032 RTC driver");
MODULE_LICENSE("GPL v2");
......@@ -454,13 +454,7 @@ static int rv8803_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
static int rv8803_nvram_write(void *priv, unsigned int offset, void *val,
size_t bytes)
{
int ret;
ret = rv8803_write_reg(priv, RV8803_RAM, *(u8 *)val);
if (ret)
return ret;
return 0;
return rv8803_write_reg(priv, RV8803_RAM, *(u8 *)val);
}
static int rv8803_nvram_read(void *priv, unsigned int offset,
......
......@@ -11,42 +11,43 @@
#include <linux/i2c.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/rtc.h>
#define RX8010_SEC 0x10
#define RX8010_MIN 0x11
#define RX8010_HOUR 0x12
#define RX8010_WDAY 0x13
#define RX8010_MDAY 0x14
#define RX8010_MONTH 0x15
#define RX8010_YEAR 0x16
#define RX8010_RESV17 0x17
#define RX8010_ALMIN 0x18
#define RX8010_ALHOUR 0x19
#define RX8010_ALWDAY 0x1A
#define RX8010_TCOUNT0 0x1B
#define RX8010_TCOUNT1 0x1C
#define RX8010_EXT 0x1D
#define RX8010_FLAG 0x1E
#define RX8010_CTRL 0x1F
#define RX8010_SEC 0x10
#define RX8010_MIN 0x11
#define RX8010_HOUR 0x12
#define RX8010_WDAY 0x13
#define RX8010_MDAY 0x14
#define RX8010_MONTH 0x15
#define RX8010_YEAR 0x16
#define RX8010_RESV17 0x17
#define RX8010_ALMIN 0x18
#define RX8010_ALHOUR 0x19
#define RX8010_ALWDAY 0x1A
#define RX8010_TCOUNT0 0x1B
#define RX8010_TCOUNT1 0x1C
#define RX8010_EXT 0x1D
#define RX8010_FLAG 0x1E
#define RX8010_CTRL 0x1F
/* 0x20 to 0x2F are user registers */
#define RX8010_RESV30 0x30
#define RX8010_RESV31 0x31
#define RX8010_IRQ 0x32
#define RX8010_RESV30 0x30
#define RX8010_RESV31 0x31
#define RX8010_IRQ 0x32
#define RX8010_EXT_WADA BIT(3)
#define RX8010_EXT_WADA BIT(3)
#define RX8010_FLAG_VLF BIT(1)
#define RX8010_FLAG_AF BIT(3)
#define RX8010_FLAG_TF BIT(4)
#define RX8010_FLAG_UF BIT(5)
#define RX8010_FLAG_VLF BIT(1)
#define RX8010_FLAG_AF BIT(3)
#define RX8010_FLAG_TF BIT(4)
#define RX8010_FLAG_UF BIT(5)
#define RX8010_CTRL_AIE BIT(3)
#define RX8010_CTRL_UIE BIT(5)
#define RX8010_CTRL_STOP BIT(6)
#define RX8010_CTRL_TEST BIT(7)
#define RX8010_CTRL_AIE BIT(3)
#define RX8010_CTRL_UIE BIT(5)
#define RX8010_CTRL_STOP BIT(6)
#define RX8010_CTRL_TEST BIT(7)
#define RX8010_ALARM_AE BIT(7)
#define RX8010_ALARM_AE BIT(7)
static const struct i2c_device_id rx8010_id[] = {
{ "rx8010", 0 },
......@@ -61,7 +62,7 @@ static const struct of_device_id rx8010_of_match[] = {
MODULE_DEVICE_TABLE(of, rx8010_of_match);
struct rx8010_data {
struct i2c_client *client;
struct regmap *regs;
struct rtc_device *rtc;
u8 ctrlreg;
};
......@@ -70,13 +71,12 @@ static irqreturn_t rx8010_irq_1_handler(int irq, void *dev_id)
{
struct i2c_client *client = dev_id;
struct rx8010_data *rx8010 = i2c_get_clientdata(client);
int flagreg;
int flagreg, err;
mutex_lock(&rx8010->rtc->ops_lock);
flagreg = i2c_smbus_read_byte_data(client, RX8010_FLAG);
if (flagreg <= 0) {
err = regmap_read(rx8010->regs, RX8010_FLAG, &flagreg);
if (err) {
mutex_unlock(&rx8010->rtc->ops_lock);
return IRQ_NONE;
}
......@@ -99,32 +99,29 @@ static irqreturn_t rx8010_irq_1_handler(int irq, void *dev_id)
rtc_update_irq(rx8010->rtc, 1, RTC_UF | RTC_IRQF);
}
i2c_smbus_write_byte_data(client, RX8010_FLAG, flagreg);
err = regmap_write(rx8010->regs, RX8010_FLAG, flagreg);
mutex_unlock(&rx8010->rtc->ops_lock);
return IRQ_HANDLED;
return err ? IRQ_NONE : IRQ_HANDLED;
}
static int rx8010_get_time(struct device *dev, struct rtc_time *dt)
{
struct rx8010_data *rx8010 = dev_get_drvdata(dev);
u8 date[7];
int flagreg;
int err;
u8 date[RX8010_YEAR - RX8010_SEC + 1];
int flagreg, err;
flagreg = i2c_smbus_read_byte_data(rx8010->client, RX8010_FLAG);
if (flagreg < 0)
return flagreg;
err = regmap_read(rx8010->regs, RX8010_FLAG, &flagreg);
if (err)
return err;
if (flagreg & RX8010_FLAG_VLF) {
dev_warn(dev, "Frequency stop detected\n");
return -EINVAL;
}
err = i2c_smbus_read_i2c_block_data(rx8010->client, RX8010_SEC,
7, date);
if (err != 7)
return err < 0 ? err : -EIO;
err = regmap_bulk_read(rx8010->regs, RX8010_SEC, date, sizeof(date));
if (err)
return err;
dt->tm_sec = bcd2bin(date[RX8010_SEC - RX8010_SEC] & 0x7f);
dt->tm_min = bcd2bin(date[RX8010_MIN - RX8010_SEC] & 0x7f);
......@@ -140,22 +137,13 @@ static int rx8010_get_time(struct device *dev, struct rtc_time *dt)
static int rx8010_set_time(struct device *dev, struct rtc_time *dt)
{
struct rx8010_data *rx8010 = dev_get_drvdata(dev);
u8 date[7];
int ctrl, flagreg;
int ret;
if ((dt->tm_year < 100) || (dt->tm_year > 199))
return -EINVAL;
u8 date[RX8010_YEAR - RX8010_SEC + 1];
int err;
/* set STOP bit before changing clock/calendar */
ctrl = i2c_smbus_read_byte_data(rx8010->client, RX8010_CTRL);
if (ctrl < 0)
return ctrl;
rx8010->ctrlreg = ctrl | RX8010_CTRL_STOP;
ret = i2c_smbus_write_byte_data(rx8010->client, RX8010_CTRL,
rx8010->ctrlreg);
if (ret < 0)
return ret;
err = regmap_set_bits(rx8010->regs, RX8010_CTRL, RX8010_CTRL_STOP);
if (err)
return err;
date[RX8010_SEC - RX8010_SEC] = bin2bcd(dt->tm_sec);
date[RX8010_MIN - RX8010_SEC] = bin2bcd(dt->tm_min);
......@@ -165,66 +153,54 @@ static int rx8010_set_time(struct device *dev, struct rtc_time *dt)
date[RX8010_YEAR - RX8010_SEC] = bin2bcd(dt->tm_year - 100);
date[RX8010_WDAY - RX8010_SEC] = bin2bcd(1 << dt->tm_wday);
ret = i2c_smbus_write_i2c_block_data(rx8010->client,
RX8010_SEC, 7, date);
if (ret < 0)
return ret;
err = regmap_bulk_write(rx8010->regs, RX8010_SEC, date, sizeof(date));
if (err)
return err;
/* clear STOP bit after changing clock/calendar */
ctrl = i2c_smbus_read_byte_data(rx8010->client, RX8010_CTRL);
if (ctrl < 0)
return ctrl;
rx8010->ctrlreg = ctrl & ~RX8010_CTRL_STOP;
ret = i2c_smbus_write_byte_data(rx8010->client, RX8010_CTRL,
rx8010->ctrlreg);
if (ret < 0)
return ret;
flagreg = i2c_smbus_read_byte_data(rx8010->client, RX8010_FLAG);
if (flagreg < 0) {
return flagreg;
}
err = regmap_clear_bits(rx8010->regs, RX8010_CTRL, RX8010_CTRL_STOP);
if (err)
return err;
if (flagreg & RX8010_FLAG_VLF)
ret = i2c_smbus_write_byte_data(rx8010->client, RX8010_FLAG,
flagreg & ~RX8010_FLAG_VLF);
err = regmap_clear_bits(rx8010->regs, RX8010_FLAG, RX8010_FLAG_VLF);
if (err)
return err;
return 0;
}
static int rx8010_init_client(struct i2c_client *client)
static int rx8010_init(struct device *dev)
{
struct rx8010_data *rx8010 = i2c_get_clientdata(client);
struct rx8010_data *rx8010 = dev_get_drvdata(dev);
u8 ctrl[2];
int need_clear = 0, err = 0;
int need_clear = 0, err;
/* Initialize reserved registers as specified in datasheet */
err = i2c_smbus_write_byte_data(client, RX8010_RESV17, 0xD8);
if (err < 0)
err = regmap_write(rx8010->regs, RX8010_RESV17, 0xD8);
if (err)
return err;
err = i2c_smbus_write_byte_data(client, RX8010_RESV30, 0x00);
if (err < 0)
err = regmap_write(rx8010->regs, RX8010_RESV30, 0x00);
if (err)
return err;
err = i2c_smbus_write_byte_data(client, RX8010_RESV31, 0x08);
if (err < 0)
err = regmap_write(rx8010->regs, RX8010_RESV31, 0x08);
if (err)
return err;
err = i2c_smbus_write_byte_data(client, RX8010_IRQ, 0x00);
if (err < 0)
err = regmap_write(rx8010->regs, RX8010_IRQ, 0x00);
if (err)
return err;
err = i2c_smbus_read_i2c_block_data(rx8010->client, RX8010_FLAG,
2, ctrl);
if (err != 2)
return err < 0 ? err : -EIO;
err = regmap_bulk_read(rx8010->regs, RX8010_FLAG, ctrl, 2);
if (err)
return err;
if (ctrl[0] & RX8010_FLAG_VLF)
dev_warn(&client->dev, "Frequency stop was detected\n");
dev_warn(dev, "Frequency stop was detected\n");
if (ctrl[0] & RX8010_FLAG_AF) {
dev_warn(&client->dev, "Alarm was detected\n");
dev_warn(dev, "Alarm was detected\n");
need_clear = 1;
}
......@@ -236,8 +212,8 @@ static int rx8010_init_client(struct i2c_client *client)
if (need_clear) {
ctrl[0] &= ~(RX8010_FLAG_AF | RX8010_FLAG_TF | RX8010_FLAG_UF);
err = i2c_smbus_write_byte_data(client, RX8010_FLAG, ctrl[0]);
if (err < 0)
err = regmap_write(rx8010->regs, RX8010_FLAG, ctrl[0]);
if (err)
return err;
}
......@@ -249,18 +225,16 @@ static int rx8010_init_client(struct i2c_client *client)
static int rx8010_read_alarm(struct device *dev, struct rtc_wkalrm *t)
{
struct rx8010_data *rx8010 = dev_get_drvdata(dev);
struct i2c_client *client = rx8010->client;
u8 alarmvals[3];
int flagreg;
int err;
int flagreg, err;
err = i2c_smbus_read_i2c_block_data(client, RX8010_ALMIN, 3, alarmvals);
if (err != 3)
return err < 0 ? err : -EIO;
err = regmap_bulk_read(rx8010->regs, RX8010_ALMIN, alarmvals, 3);
if (err)
return err;
flagreg = i2c_smbus_read_byte_data(client, RX8010_FLAG);
if (flagreg < 0)
return flagreg;
err = regmap_read(rx8010->regs, RX8010_FLAG, &flagreg);
if (err)
return err;
t->time.tm_sec = 0;
t->time.tm_min = bcd2bin(alarmvals[0] & 0x7f);
......@@ -277,55 +251,38 @@ static int rx8010_read_alarm(struct device *dev, struct rtc_wkalrm *t)
static int rx8010_set_alarm(struct device *dev, struct rtc_wkalrm *t)
{
struct i2c_client *client = to_i2c_client(dev);
struct rx8010_data *rx8010 = dev_get_drvdata(dev);
u8 alarmvals[3];
int extreg, flagreg;
int err;
flagreg = i2c_smbus_read_byte_data(client, RX8010_FLAG);
if (flagreg < 0) {
return flagreg;
}
if (rx8010->ctrlreg & (RX8010_CTRL_AIE | RX8010_CTRL_UIE)) {
rx8010->ctrlreg &= ~(RX8010_CTRL_AIE | RX8010_CTRL_UIE);
err = i2c_smbus_write_byte_data(rx8010->client, RX8010_CTRL,
rx8010->ctrlreg);
if (err < 0) {
err = regmap_write(rx8010->regs, RX8010_CTRL, rx8010->ctrlreg);
if (err)
return err;
}
}
flagreg &= ~RX8010_FLAG_AF;
err = i2c_smbus_write_byte_data(rx8010->client, RX8010_FLAG, flagreg);
if (err < 0)
err = regmap_clear_bits(rx8010->regs, RX8010_FLAG, RX8010_FLAG_AF);
if (err)
return err;
alarmvals[0] = bin2bcd(t->time.tm_min);
alarmvals[1] = bin2bcd(t->time.tm_hour);
alarmvals[2] = bin2bcd(t->time.tm_mday);
err = i2c_smbus_write_i2c_block_data(rx8010->client, RX8010_ALMIN,
2, alarmvals);
if (err < 0)
err = regmap_bulk_write(rx8010->regs, RX8010_ALMIN, alarmvals, 2);
if (err)
return err;
extreg = i2c_smbus_read_byte_data(client, RX8010_EXT);
if (extreg < 0)
return extreg;
extreg |= RX8010_EXT_WADA;
err = i2c_smbus_write_byte_data(rx8010->client, RX8010_EXT, extreg);
if (err < 0)
err = regmap_clear_bits(rx8010->regs, RX8010_EXT, RX8010_EXT_WADA);
if (err)
return err;
if (alarmvals[2] == 0)
alarmvals[2] |= RX8010_ALARM_AE;
err = i2c_smbus_write_byte_data(rx8010->client, RX8010_ALWDAY,
alarmvals[2]);
if (err < 0)
err = regmap_write(rx8010->regs, RX8010_ALWDAY, alarmvals[2]);
if (err)
return err;
if (t->enabled) {
......@@ -335,9 +292,8 @@ static int rx8010_set_alarm(struct device *dev, struct rtc_wkalrm *t)
rx8010->ctrlreg |=
(RX8010_CTRL_AIE | RX8010_CTRL_UIE);
err = i2c_smbus_write_byte_data(rx8010->client, RX8010_CTRL,
rx8010->ctrlreg);
if (err < 0)
err = regmap_write(rx8010->regs, RX8010_CTRL, rx8010->ctrlreg);
if (err)
return err;
}
......@@ -347,11 +303,9 @@ static int rx8010_set_alarm(struct device *dev, struct rtc_wkalrm *t)
static int rx8010_alarm_irq_enable(struct device *dev,
unsigned int enabled)
{
struct i2c_client *client = to_i2c_client(dev);
struct rx8010_data *rx8010 = dev_get_drvdata(dev);
int flagreg;
u8 ctrl;
int err;
u8 ctrl;
ctrl = rx8010->ctrlreg;
......@@ -367,20 +321,14 @@ static int rx8010_alarm_irq_enable(struct device *dev,
ctrl &= ~RX8010_CTRL_AIE;
}
flagreg = i2c_smbus_read_byte_data(client, RX8010_FLAG);
if (flagreg < 0)
return flagreg;
flagreg &= ~RX8010_FLAG_AF;
err = i2c_smbus_write_byte_data(rx8010->client, RX8010_FLAG, flagreg);
if (err < 0)
err = regmap_clear_bits(rx8010->regs, RX8010_FLAG, RX8010_FLAG_AF);
if (err)
return err;
if (ctrl != rx8010->ctrlreg) {
rx8010->ctrlreg = ctrl;
err = i2c_smbus_write_byte_data(rx8010->client, RX8010_CTRL,
rx8010->ctrlreg);
if (err < 0)
err = regmap_write(rx8010->regs, RX8010_CTRL, rx8010->ctrlreg);
if (err)
return err;
}
......@@ -390,14 +338,13 @@ static int rx8010_alarm_irq_enable(struct device *dev,
static int rx8010_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
{
struct rx8010_data *rx8010 = dev_get_drvdata(dev);
int tmp;
int flagreg;
int tmp, flagreg, err;
switch (cmd) {
case RTC_VL_READ:
flagreg = i2c_smbus_read_byte_data(rx8010->client, RX8010_FLAG);
if (flagreg < 0)
return flagreg;
err = regmap_read(rx8010->regs, RX8010_FLAG, &flagreg);
if (err)
return err;
tmp = flagreg & RX8010_FLAG_VLF ? RTC_VL_DATA_INVALID : 0;
return put_user(tmp, (unsigned int __user *)arg);
......@@ -407,65 +354,72 @@ static int rx8010_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
}
}
static struct rtc_class_ops rx8010_rtc_ops = {
static const struct rtc_class_ops rx8010_rtc_ops_default = {
.read_time = rx8010_get_time,
.set_time = rx8010_set_time,
.ioctl = rx8010_ioctl,
};
static const struct rtc_class_ops rx8010_rtc_ops_alarm = {
.read_time = rx8010_get_time,
.set_time = rx8010_set_time,
.ioctl = rx8010_ioctl,
.read_alarm = rx8010_read_alarm,
.set_alarm = rx8010_set_alarm,
.alarm_irq_enable = rx8010_alarm_irq_enable,
};
static const struct regmap_config rx8010_regmap_config = {
.name = "rx8010-rtc",
.reg_bits = 8,
.val_bits = 8,
};
static int rx8010_probe(struct i2c_client *client,
const struct i2c_device_id *id)
static int rx8010_probe(struct i2c_client *client)
{
struct i2c_adapter *adapter = client->adapter;
struct device *dev = &client->dev;
struct rx8010_data *rx8010;
int err = 0;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
| I2C_FUNC_SMBUS_I2C_BLOCK)) {
dev_err(&adapter->dev, "doesn't support required functionality\n");
return -EIO;
}
rx8010 = devm_kzalloc(&client->dev, sizeof(struct rx8010_data),
GFP_KERNEL);
rx8010 = devm_kzalloc(dev, sizeof(*rx8010), GFP_KERNEL);
if (!rx8010)
return -ENOMEM;
rx8010->client = client;
i2c_set_clientdata(client, rx8010);
err = rx8010_init_client(client);
rx8010->regs = devm_regmap_init_i2c(client, &rx8010_regmap_config);
if (IS_ERR(rx8010->regs))
return PTR_ERR(rx8010->regs);
err = rx8010_init(dev);
if (err)
return err;
rx8010->rtc = devm_rtc_allocate_device(dev);
if (IS_ERR(rx8010->rtc))
return PTR_ERR(rx8010->rtc);
if (client->irq > 0) {
dev_info(&client->dev, "IRQ %d supplied\n", client->irq);
err = devm_request_threaded_irq(&client->dev, client->irq, NULL,
dev_info(dev, "IRQ %d supplied\n", client->irq);
err = devm_request_threaded_irq(dev, client->irq, NULL,
rx8010_irq_1_handler,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
"rx8010", client);
if (err) {
dev_err(&client->dev, "unable to request IRQ\n");
client->irq = 0;
} else {
rx8010_rtc_ops.read_alarm = rx8010_read_alarm;
rx8010_rtc_ops.set_alarm = rx8010_set_alarm;
rx8010_rtc_ops.alarm_irq_enable = rx8010_alarm_irq_enable;
dev_err(dev, "unable to request IRQ\n");
return err;
}
}
rx8010->rtc = devm_rtc_device_register(&client->dev, client->name,
&rx8010_rtc_ops, THIS_MODULE);
if (IS_ERR(rx8010->rtc)) {
dev_err(&client->dev, "unable to register the class device\n");
return PTR_ERR(rx8010->rtc);
rx8010->rtc->ops = &rx8010_rtc_ops_alarm;
} else {
rx8010->rtc->ops = &rx8010_rtc_ops_default;
}
rx8010->rtc->max_user_freq = 1;
rx8010->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
rx8010->rtc->range_max = RTC_TIMESTAMP_END_2099;
return 0;
return rtc_register_device(rx8010->rtc);
}
static struct i2c_driver rx8010_driver = {
......@@ -473,7 +427,7 @@ static struct i2c_driver rx8010_driver = {
.name = "rtc-rx8010",
.of_match_table = of_match_ptr(rx8010_of_match),
},
.probe = rx8010_probe,
.probe_new = rx8010_probe,
.id_table = rx8010_id,
};
......
......@@ -494,13 +494,8 @@ static int s3c_rtc_probe(struct platform_device *pdev)
if (info->data->needs_src_clk) {
info->rtc_src_clk = devm_clk_get(&pdev->dev, "rtc_src");
if (IS_ERR(info->rtc_src_clk)) {
ret = PTR_ERR(info->rtc_src_clk);
if (ret != -EPROBE_DEFER)
dev_err(&pdev->dev,
"failed to find rtc source clock\n");
else
dev_dbg(&pdev->dev,
"probe deferred due to missing rtc src clk\n");
ret = dev_err_probe(&pdev->dev, PTR_ERR(info->rtc_src_clk),
"failed to find rtc source clock\n");
goto err_src_clk;
}
ret = clk_prepare_enable(info->rtc_src_clk);
......
......@@ -173,7 +173,7 @@ static int st_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *t)
return 0;
}
static struct rtc_class_ops st_rtc_ops = {
static const struct rtc_class_ops st_rtc_ops = {
.read_time = st_rtc_read_time,
.set_time = st_rtc_set_time,
.read_alarm = st_rtc_read_alarm,
......
......@@ -72,7 +72,6 @@ struct mtk_rtc_data {
};
struct mt6397_rtc {
struct device *dev;
struct rtc_device *rtc_dev;
/* Protect register access from multiple tasks */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment