Merge tag 'at91-cleanup' of git://github.com/at91linux/linux-at91 into next/cleanup

From Nicolas Ferre:
Big update converting pinctrl to use macros and header files. Increases
readability and avoids typos.
Update of AT91 defconfigs and merge of defconfigs for the similar SoCs
sam9260/9g20 and sam9261/9g10.

* tag 'at91-cleanup' of git://github.com/at91linux/linux-at91:
  ARM: at91: udpate defconfigs
  ARM: at91: dt: switch to standard IRQ flag defines
  ARM: at91: dt: switch to pinctrl to pre-processor
  ARM: at91: dt: add pinctrl pre-processor define
  ARM: at91: dt: switch to standard GPIO flag defines.
  ARM: at91: dt: use #include for all device trees
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/aks-cdu.dts

@@ -9,7 +9,7 @@
 
 /dts-v1/;
 
-/include/ "ge863-pro3.dtsi"
+#include "ge863-pro3.dtsi"
 
 / {
 	chosen {
@@ -46,7 +46,7 @@ macb0: ethernet@fffc4000 {
 			};
 
 			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 15 0>;
+				atmel,vbus-gpio = <&pioC 15 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
 		};
@@ -90,23 +90,23 @@ leds {
 		compatible = "gpio-leds";
 
 		red {
-			gpios = <&pioC 10 0>;
+			gpios = <&pioC 10 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "none";
 		};
 
 		green {
-			gpios = <&pioA 5 1>;
+			gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 			default-state = "on";
 		};
 
 		yellow {
-			gpios = <&pioB 20 1>;
+			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
 		blue {
-			gpios = <&pioB 21 1>;
+			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 	};

arch/arm/boot/dts/animeo_ip.dts

@@ -7,7 +7,7 @@
  */
 
 /dts-v1/;
-/include/ "at91sam9260.dtsi"
+#include "at91sam9260.dtsi"
 
 / {
 	model = "Somfy Animeo IP";
@@ -123,7 +123,7 @@ root@2b0000 {
 
 		usb0: ohci@00500000 {
 			num-ports = <2>;
-			atmel,vbus-gpio = <&pioB 15 1>;
+			atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
 			status = "okay";
 		};
 	};
@@ -133,23 +133,23 @@ leds {
 
 		power_green {
 			label = "power_green";
-			gpios = <&pioC 17 0>;
+			gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		power_red {
 			label = "power_red";
-			gpios = <&pioA 2 0>;
+			gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
 		};
 
 		tx_green {
 			label = "tx_green";
-			gpios = <&pioC 19 0>;
+			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
 		};
 
 		tx_red {
 			label = "tx_red";
-			gpios = <&pioC 18 0>;
+			gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -160,21 +160,21 @@ gpio_keys {
 
 		keyswitch_in {
 			label = "keyswitch_in";
-			gpios = <&pioB 1 0>;
+			gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
 			linux,code = <28>;
 			gpio-key,wakeup;
 		};
 
 		error_in {
 			label = "error_in";
-			gpios = <&pioB 2 0>;
+			gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
 			linux,code = <29>;
 			gpio-key,wakeup;
 		};
 
 		btn {
 			label = "btn";
-			gpios = <&pioC 23 0>;
+			gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
 			linux,code = <31>;
 			gpio-key,wakeup;
 		};

arch/arm/boot/dts/at91-ariag25.dts

@@ -7,7 +7,7 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "at91sam9g25.dtsi"
+#include "at91sam9g25.dtsi"
 
 / {
 	model = "Acme Systems Aria G25";
@@ -156,7 +156,7 @@ leds {
 		/* little green LED in middle of Aria G25 module */
 		aria_led {
 			label = "aria_led";
-			gpios = <&pioB 8 0>; /* PB8 */
+			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
 			linux,default-trigger = "heartbeat";
 		};
 
@@ -164,7 +164,7 @@ aria_led {
 
 	onewire@0 {
 		compatible = "w1-gpio";
-		gpios = <&pioA 21 1>;
+		gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_w1_0>;
 	};

arch/arm/boot/dts/at91rm9200ek.dts

@@ -6,7 +6,7 @@
  * Licensed under GPLv2 only
  */
 /dts-v1/;
-/include/ "at91rm9200.dtsi"
+#include "at91rm9200.dtsi"
 
 / {
 	model = "Atmel AT91RM9200 evaluation kit";
@@ -50,7 +50,7 @@ macb0: ethernet@fffbc000 {
 			};
 
 			usb1: gadget@fffb0000 {
-				atmel,vbus-gpio = <&pioD 4 0>;
+				atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
 		};
@@ -66,19 +66,19 @@ leds {
 
 		ds2 {
 			label = "green";
-			gpios = <&pioB 0 0x1>;
+			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "mmc0";
 		};
 
 		ds4 {
 			label = "yellow";
-			gpios = <&pioB 1 0x1>;
+			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		ds6 {
 			label = "red";
-			gpios = <&pioB 2 0x1>;
+			gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
 		};
 	};
 };

arch/arm/boot/dts/at91sam9263ek.dts

@@ -6,7 +6,7 @@
  * Licensed under GPLv2 only
  */
 /dts-v1/;
-/include/ "at91sam9263.dtsi"
+#include "at91sam9263.dtsi"
 
 / {
 	model = "Atmel at91sam9263ek";
@@ -51,7 +51,7 @@ macb0: ethernet@fffbc000 {
 			};
 
 			usb1: gadget@fff78000 {
-				atmel,vbus-gpio = <&pioA 25 0>;
+				atmel,vbus-gpio = <&pioA 25 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
 
@@ -65,8 +65,8 @@ &pinctrl_mmc0_slot0_cmd_dat0
 				slot@0 {
 					reg = <0>;
 					bus-width = <4>;
-					cd-gpios = <&pioE 18 0>;
-					wp-gpios = <&pioE 19 0>;
+					cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>;
+					wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -74,8 +74,8 @@ pinctrl@fffff200 {
 				mmc0 {
 					pinctrl_board_mmc0: mmc0-board {
 						atmel,pins =
-							<5 18 0x0 0x5	/* PE18 gpio CD pin pull up and deglitch */
-							 5 19 0x0 0x1>;	/* PE19 gpio WP pin pull up */
+							<AT91_PIOE 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH 	/* PE18 gpio CD pin pull up and deglitch */
+							 AT91_PIOE 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PE19 gpio WP pin pull up */
 					};
 				};
 			};
@@ -141,8 +141,8 @@ data@7ca0000 {
 		usb0: ohci@00a00000 {
 			num-ports = <2>;
 			status = "okay";
-			atmel,vbus-gpio = <&pioA 24 0
-					   &pioA 21 0
+			atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH
+					   &pioA 21 GPIO_ACTIVE_HIGH
 					  >;
 		};
 	};
@@ -152,13 +152,13 @@ leds {
 
 		d3 {
 			label = "d3";
-			gpios = <&pioB 7 0>;
+			gpios = <&pioB 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		d2 {
 			label = "d2";
-			gpios = <&pioC 29 1>;
+			gpios = <&pioC 29 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
 		};
 	};
@@ -168,14 +168,14 @@ gpio_keys {
 
 		left_click {
 			label = "left_click";
-			gpios = <&pioC 5 1>;
+			gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
 			gpio-key,wakeup;
 		};
 
 		right_click {
 			label = "right_click";
-			gpios = <&pioC 4 1>;
+			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
 			gpio-key,wakeup;
 		};

arch/arm/boot/dts/at91sam9g15.dtsi

@@ -6,7 +6,7 @@
  * Licensed under GPLv2.
  */
 
-/include/ "at91sam9x5.dtsi"
+#include "at91sam9x5.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G15 SoC";

arch/arm/boot/dts/at91sam9g15ek.dts

@@ -7,8 +7,8 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "at91sam9g15.dtsi"
-/include/ "at91sam9x5ek.dtsi"
+#include "at91sam9g15.dtsi"
+#include "at91sam9x5ek.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G15-EK";

arch/arm/boot/dts/at91sam9g20.dtsi

@@ -6,7 +6,7 @@
  * Licensed under GPLv2.
  */
 
-/include/ "at91sam9260.dtsi"
+#include "at91sam9260.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G20 family SoC";

arch/arm/boot/dts/at91sam9g20ek.dts

@@ -6,7 +6,7 @@
  * Licensed under GPLv2.
  */
 /dts-v1/;
-/include/ "at91sam9g20ek_common.dtsi"
+#include "at91sam9g20ek_common.dtsi"
 
 / {
 	model = "Atmel at91sam9g20ek";
@@ -17,13 +17,13 @@ leds {
 
 		ds1 {
 			label = "ds1";
-			gpios = <&pioA 9 0>;
+			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		ds5 {
 			label = "ds5";
-			gpios = <&pioA 6 1>;
+			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
 		};
 	};
 };

arch/arm/boot/dts/at91sam9g20ek_2mmc.dts

@@ -6,7 +6,7 @@
  * Licensed under GPLv2.
  */
 /dts-v1/;
-/include/ "at91sam9g20ek_common.dtsi"
+#include "at91sam9g20ek_common.dtsi"
 
 / {
 	model = "Atmel at91sam9g20ek 2 mmc";
@@ -23,7 +23,7 @@ &pinctrl_mmc0_slot0_cmd_dat0
 				slot@0 {
 					reg = <0>;
 					bus-width = <4>;
-					cd-gpios = <&pioC 2 0>;
+					cd-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -31,7 +31,7 @@ pinctrl@fffff400 {
 				mmc0_slot0 {
 					pinctrl_board_mmc0_slot0: mmc0_slot0-board {
 						atmel,pins =
-							<2 2 0x0 0x5>;	/* PC2 gpio CD pin pull up and deglitch */
+							<AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PC2 gpio CD pin pull up and deglitch */
 					};
 				};
 			};
@@ -43,13 +43,13 @@ leds {
 
 		ds1 {
 			label = "ds1";
-			gpios = <&pioB 9 0>;
+			gpios = <&pioB 9 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		ds5 {
 			label = "ds5";
-			gpios = <&pioB 8 1>;
+			gpios = <&pioB 8 GPIO_ACTIVE_LOW>;
 		};
 	};
 };

arch/arm/boot/dts/at91sam9g20ek_common.dtsi

@@ -5,7 +5,7 @@
  *
  * Licensed under GPLv2.
  */
-/include/ "at91sam9g20.dtsi"
+#include "at91sam9g20.dtsi"
 
 / {
 
@@ -34,10 +34,17 @@ pinctrl@fffff400 {
 				board {
 					pinctrl_pck0_as_mck: pck0_as_mck {
 						atmel,pins =
-							<2 1 0x2 0x0>;	/* PC1 periph B */
+							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC1 periph B */
 					};
 
 				};
+
+				mmc0_slot1 {
+					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PC9 gpio CD pin pull up and deglitch */
+					};
+				};
 			};
 
 			dbgu: serial@fffff200 {
@@ -65,7 +72,7 @@ macb0: ethernet@fffc4000 {
 			};
 
 			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 5 0>;
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
 
@@ -79,16 +86,7 @@ &pinctrl_mmc0_slot1_cmd_dat0
 				slot@1 {
 					reg = <1>;
 					bus-width = <4>;
-					cd-gpios = <&pioC 9 0>;
-				};
-			};
-
-			pinctrl@fffff400 {
-				mmc0_slot1 {
-					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
-						atmel,pins =
-							<2 9 0x0 0x5>;	/* PC9 gpio CD pin pull up and deglitch */
-					};
+					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -180,14 +178,14 @@ gpio_keys {
 
 		btn3 {
 			label = "Button 3";
-			gpios = <&pioA 30 1>;
+			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
 			gpio-key,wakeup;
 		};
 
 		btn4 {
 			label = "Button 4";
-			gpios = <&pioA 31 1>;
+			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
 			linux,code = <0x104>;
 			gpio-key,wakeup;
 		};

arch/arm/boot/dts/at91sam9g25.dtsi

@@ -6,7 +6,7 @@
  * Licensed under GPLv2.
  */
 
-/include/ "at91sam9x5.dtsi"
+#include "at91sam9x5.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G25 SoC";

arch/arm/boot/dts/at91sam9g25ek.dts

@@ -7,8 +7,8 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "at91sam9g25.dtsi"
-/include/ "at91sam9x5ek.dtsi"
+#include "at91sam9g25.dtsi"
+#include "at91sam9x5ek.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G25-EK";

arch/arm/boot/dts/at91sam9g35.dtsi

@@ -6,7 +6,7 @@
  * Licensed under GPLv2.
  */
 
-/include/ "at91sam9x5.dtsi"
+#include "at91sam9x5.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G35 SoC";

arch/arm/boot/dts/at91sam9g35ek.dts

@@ -7,8 +7,8 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "at91sam9g35.dtsi"
-/include/ "at91sam9x5ek.dtsi"
+#include "at91sam9g35.dtsi"
+#include "at91sam9x5ek.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G35-EK";

arch/arm/boot/dts/at91sam9m10g45ek.dts

@@ -7,7 +7,7 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "at91sam9g45.dtsi"
+#include "at91sam9g45.dtsi"
 
 / {
 	model = "Atmel AT91SAM9M10G45-EK";
@@ -68,7 +68,7 @@ &pinctrl_mmc0_slot0_clk_cmd_dat0
 				slot@0 {
 					reg = <0>;
 					bus-width = <4>;
-					cd-gpios = <&pioD 10 0>;
+					cd-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -81,8 +81,8 @@ &pinctrl_mmc1_slot0_clk_cmd_dat0
 				slot@0 {
 					reg = <0>;
 					bus-width = <4>;
-					cd-gpios = <&pioD 11 0>;
-					wp-gpios = <&pioD 29 0>;
+					cd-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>;
+					wp-gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -90,15 +90,15 @@ pinctrl@fffff200 {
 				mmc0 {
 					pinctrl_board_mmc0: mmc0-board {
 						atmel,pins =
-							<3 10 0x0 0x5>;	/* PD10 gpio CD pin pull up and deglitch */
+							<AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD10 gpio CD pin pull up and deglitch */
 					};
 				};
 
 				mmc1 {
 					pinctrl_board_mmc1: mmc1-board {
 						atmel,pins =
-							<3 11 0x0 0x5	/* PD11 gpio CD pin pull up and deglitch */
-							 3 29 0x0 0x1>;	/* PD29 gpio WP pin pull up */
+							<AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH	/* PD11 gpio CD pin pull up and deglitch */
+							 AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PD29 gpio WP pin pull up */
 					};
 				};
 			};
@@ -139,8 +139,8 @@ data@4000000 {
 		usb0: ohci@00700000 {
 			status = "okay";
 			num-ports = <2>;
-			atmel,vbus-gpio = <&pioD 1 1
-					   &pioD 3 1>;
+			atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW
+					   &pioD 3 GPIO_ACTIVE_LOW>;
 		};
 
 		usb1: ehci@00800000 {
@@ -153,19 +153,19 @@ leds {
 
 		d8 {
 			label = "d8";
-			gpios = <&pioD 30 0>;
+			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		d6 {
 			label = "d6";
-			gpios = <&pioD 0 1>;
+			gpios = <&pioD 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
 		};
 
 		d7 {
 			label = "d7";
-			gpios = <&pioD 31 1>;
+			gpios = <&pioD 31 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "mmc0";
 		};
 	};
@@ -175,45 +175,45 @@ gpio_keys {
 
 		left_click {
 			label = "left_click";
-			gpios = <&pioB 6 1>;
+			gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
 			gpio-key,wakeup;
 		};
 
 		right_click {
 			label = "right_click";
-			gpios = <&pioB 7 1>;
+			gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
 			gpio-key,wakeup;
 		};
 
 		left {
 			label = "Joystick Left";
-			gpios = <&pioB 14 1>;
+			gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
 			linux,code = <105>;
 		};
 
 		right {
 			label = "Joystick Right";
-			gpios = <&pioB 15 1>;
+			gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
 			linux,code = <106>;
 		};
 
 		up {
 			label = "Joystick Up";
-			gpios = <&pioB 16 1>;
+			gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
 			linux,code = <103>;
 		};
 
 		down {
 			label = "Joystick Down";
-			gpios = <&pioB 17 1>;
+			gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
 			linux,code = <108>;
 		};
 
 		enter {
 			label = "Joystick Press";
-			gpios = <&pioB 18 1>;
+			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
 		};
 	};

arch/arm/boot/dts/at91sam9n12ek.dts

@@ -7,7 +7,7 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "at91sam9n12.dtsi"
+#include "at91sam9n12.dtsi"
 
 / {
 	model = "Atmel AT91SAM9N12-EK";
@@ -55,7 +55,7 @@ &pinctrl_mmc0_slot0_clk_cmd_dat0
 				slot@0 {
 					reg = <0>;
 					bus-width = <4>;
-					cd-gpios = <&pioA 7 0>;
+					cd-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -63,7 +63,7 @@ pinctrl@fffff400 {
 				mmc0 {
 					pinctrl_board_mmc0: mmc0-board {
 						atmel,pins =
-							<0 7 0x0 0x5>;	/* PA7 gpio CD pin pull up and deglitch */
+							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PA7 gpio CD pin pull up and deglitch */
 					};
 				};
 			};
@@ -95,19 +95,19 @@ leds {
 
 		d8 {
 			label = "d8";
-			gpios = <&pioB 4 1>;
+			gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "mmc0";
 		};
 
 		d9 {
 			label = "d6";
-			gpios = <&pioB 5 1>;
+			gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
 		};
 
 		d10 {
 			label = "d7";
-			gpios = <&pioB 6 0>;
+			gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
@@ -117,7 +117,7 @@ gpio_keys {
 
 		enter {
 			label = "Enter";
-			gpios = <&pioB 4 1>;
+			gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
 			gpio-key,wakeup;
 		};

arch/arm/boot/dts/at91sam9x25.dtsi

@@ -6,7 +6,7 @@
  * Licensed under GPLv2.
  */
 
-/include/ "at91sam9x5.dtsi"
+#include "at91sam9x5.dtsi"
 
 / {
 	model = "Atmel AT91SAM9X25 SoC";
@@ -26,16 +26,16 @@ pinctrl@fffff400 {
 				macb1 {
 					pinctrl_macb1_rmii: macb1_rmii-0 {
 						atmel,pins =
-							<2 16 0x2 0x0	/* PC16 periph B */
-							 2 18 0x2 0x0	/* PC18 periph B */
-							 2 19 0x2 0x0	/* PC19 periph B */
-							 2 20 0x2 0x0	/* PC20 periph B */
-							 2 21 0x2 0x0	/* PC21 periph B */
-							 2 27 0x2 0x0	/* PC27 periph B */
-							 2 28 0x2 0x0	/* PC28 periph B */
-							 2 29 0x2 0x0	/* PC29 periph B */
-							 2 30 0x2 0x0	/* PC30 periph B */
-							 2 31 0x2 0x0>;	/* PC31 periph B */
+							<AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC16 periph B */
+							 AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC18 periph B */
+							 AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC19 periph B */
+							 AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC20 periph B */
+							 AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC21 periph B */
+							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC27 periph B */
+							 AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC28 periph B */
+							 AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC29 periph B */
+							 AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC30 periph B */
+							 AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC31 periph B */
 					};
 				};
 			};

arch/arm/boot/dts/at91sam9x25ek.dts

@@ -7,8 +7,8 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "at91sam9x25.dtsi"
-/include/ "at91sam9x5ek.dtsi"
+#include "at91sam9x25.dtsi"
+#include "at91sam9x5ek.dtsi"
 
 / {
 	model = "Atmel AT91SAM9X25-EK";

arch/arm/boot/dts/at91sam9x35.dtsi

@@ -6,7 +6,7 @@
  * Licensed under GPLv2.
  */
 
-/include/ "at91sam9x5.dtsi"
+#include "at91sam9x5.dtsi"
 
 / {
 	model = "Atmel AT91SAM9X35 SoC";

arch/arm/boot/dts/at91sam9x35ek.dts

@@ -7,8 +7,8 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "at91sam9x35.dtsi"
-/include/ "at91sam9x5ek.dtsi"
+#include "at91sam9x35.dtsi"
+#include "at91sam9x5ek.dtsi"
 
 / {
 	model = "Atmel AT91SAM9X35-EK";

arch/arm/boot/dts/at91sam9x5cm.dtsi

@@ -28,7 +28,7 @@ apb {
 			pinctrl@fffff400 {
 				1wire_cm {
 					pinctrl_1wire_cm: 1wire_cm-0 {
-						atmel,pins = <1 18 0x0 0x2>; /* PB18 multidrive, conflicts with led */
+						atmel,pins = <AT91_PIOB 18 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB18 multidrive, conflicts with led */
 					};
 				};
 			};
@@ -75,19 +75,19 @@ leds {
 
 		pb18 {
 			label = "pb18";
-			gpios = <&pioB 18 1>;
+			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		pd21 {
 			label = "pd21";
-			gpios = <&pioD 21 0>;
+			gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
 	1wire_cm {
 		compatible = "w1-gpio";
-		gpios = <&pioB 18 0>;
+		gpios = <&pioB 18 GPIO_ACTIVE_HIGH>;
 		linux,open-drain;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_1wire_cm>;

arch/arm/boot/dts/at91sam9x5ek.dtsi

@@ -6,7 +6,7 @@
  *
  * Licensed under GPLv2 or later.
  */
-/include/ "at91sam9x5cm.dtsi"
+#include "at91sam9x5cm.dtsi"
 
 / {
 	model = "Atmel AT91SAM9X5-EK";
@@ -27,7 +27,7 @@ &pinctrl_mmc0_slot0_clk_cmd_dat0
 				slot@0 {
 					reg = <0>;
 					bus-width = <4>;
-					cd-gpios = <&pioD 15 0>;
+					cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -40,7 +40,7 @@ &pinctrl_mmc1_slot0_clk_cmd_dat0
 				slot@0 {
 					reg = <0>;
 					bus-width = <4>;
-					cd-gpios = <&pioD 14 0>;
+					cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -60,14 +60,14 @@ pinctrl@fffff400 {
 				mmc0 {
 					pinctrl_board_mmc0: mmc0-board {
 						atmel,pins =
-							<3 15 0x0 0x5>;	/* PD15 gpio CD pin pull up and deglitch */
+							<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
 					};
 				};
 
 				mmc1 {
 					pinctrl_board_mmc1: mmc1-board {
 						atmel,pins =
-							<3 14 0x0 0x5>;	/* PD14 gpio CD pin pull up and deglitch */
+							<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD14 gpio CD pin pull up and deglitch */
 					};
 				};
 			};
@@ -86,8 +86,8 @@ m25p80@0 {
 		usb0: ohci@00600000 {
 			status = "okay";
 			num-ports = <2>;
-			atmel,vbus-gpio = <&pioD 19 1
-					   &pioD 20 1
+			atmel,vbus-gpio = <&pioD 19 GPIO_ACTIVE_LOW
+					   &pioD 20 GPIO_ACTIVE_LOW
 					  >;
 		};
 

arch/arm/boot/dts/ethernut5.dts

@@ -6,7 +6,7 @@
  * Licensed under GPLv2.
  */
 /dts-v1/;
-/include/ "at91sam9260.dtsi"
+#include "at91sam9260.dtsi"
 
 / {
 	model = "Ethernut 5";
@@ -40,7 +40,7 @@ macb0: ethernet@fffc4000 {
 			};
 
 			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 5 0>;
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
 		};
@@ -52,7 +52,7 @@ nand0: nand@40000000 {
 			status = "okay";
 
 			gpios = <0
-				 &pioC 14 0
+				 &pioC 14 GPIO_ACTIVE_HIGH
 				 0
 				>;
 

arch/arm/boot/dts/evk-pro3.dts

@@ -9,7 +9,7 @@
 
 /dts-v1/;
 
-/include/ "ge863-pro3.dtsi"
+#include "ge863-pro3.dtsi"
 
 / {
 	model = "Telit EVK-PRO3 for Telit GE863-PRO3";
@@ -31,7 +31,7 @@ usart2: serial@fffb8000 {
 			};
 
 			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 5 0>;
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
 

arch/arm/boot/dts/ge863-pro3.dtsi

@@ -7,7 +7,7 @@
  * Licensed under GPLv2 or later.
  */
 
-/include/ "at91sam9260.dtsi"
+#include "at91sam9260.dtsi"
 
 / {
 	clocks {

arch/arm/boot/dts/kizbox.dts

@@ -6,7 +6,7 @@
  * Licensed under GPLv2.
  */
 /dts-v1/;
-/include/ "at91sam9g20.dtsi"
+#include "at91sam9g20.dtsi"
 
 / {
 
@@ -94,26 +94,26 @@ leds {
 
 		led1g {
 			label = "led1:green";
-			gpios = <&pioB 0 1>;
+			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
 		led1r {
 			label = "led1:red";
-			gpios = <&pioB 1 1>;
+			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
 		led2g {
 			label = "led2:green";
-			gpios = <&pioB 2 1>;
+			gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 			default-state = "on";
 		};
 
 		led2r {
 			label = "led2:red";
-			gpios = <&pioB 3 1>;
+			gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 	};
@@ -125,14 +125,14 @@ gpio_keys {
 
 		reset {
 			label = "reset";
-			gpios = <&pioB 30 1>;
+			gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
 			linux,code = <0x100>;
 			gpio-key,wakeup;
 		};
 
 		mode {
 			label = "mode";
-			gpios = <&pioB 31 1>;
+			gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
 			linux,code = <0x101>;
 			gpio-key,wakeup;
 		};

arch/arm/boot/dts/mpa1600.dts

@@ -6,7 +6,7 @@
  * Licensed under GPLv2 only
  */
 /dts-v1/;
-/include/ "at91rm9200.dtsi"
+#include "at91rm9200.dtsi"
 
 / {
 	model = "Phontech MPA 1600";
@@ -62,7 +62,7 @@ gpio_keys {
 
 		monitor_mute {
 			label = "Monitor mute";
-			gpios = <&pioC 1 1>;
+			gpios = <&pioC 1 GPIO_ACTIVE_LOW>;
 			linux,code = <113>;
 		};
 	};

arch/arm/boot/dts/pm9g45.dts

@@ -6,7 +6,7 @@
  * Licensed under GPLv2.
  */
 /dts-v1/;
-/include/ "at91sam9g45.dtsi"
+#include "at91sam9g45.dtsi"
 
 / {
 	model = "Ronetix pm9g45";
@@ -42,15 +42,15 @@ pinctrl@fffff200 {
 				board {
 					pinctrl_board_nand: nand0-board {
 						atmel,pins =
-							<3 3 0x0 0x1	/* PD3 gpio RDY pin pull_up*/
-							 2 14 0x0 0x1>;	/* PC14 gpio enable pin pull_up */
+							<AT91_PIOD 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP	/* PD3 gpio RDY pin pull_up*/
+							 AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PC14 gpio enable pin pull_up */
 					};
 				};
 
 				mmc {
 					pinctrl_board_mmc: mmc0-board {
 						atmel,pins =
-							<3 6 0x0 0x5>;	/* PD6 gpio CD pin pull_up and deglitch */
+							<AT91_PIOD 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD6 gpio CD pin pull_up and deglitch */
 					};
 				};
 			};
@@ -64,7 +64,7 @@ &pinctrl_mmc0_slot0_clk_cmd_dat0
 				slot@0 {
 					reg = <0>;
 					bus-width = <4>;
-					cd-gpios = <&pioD 6 0>;
+					cd-gpios = <&pioD 6 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -81,8 +81,8 @@ nand0: nand@40000000 {
 			nand-on-flash-bbt;
 			pinctrl-0 = <&pinctrl_board_nand>;
 
-			gpios = <&pioD 3 0
-				 &pioC 14 0
+			gpios = <&pioD 3 GPIO_ACTIVE_HIGH
+				 &pioC 14 GPIO_ACTIVE_HIGH
 				 0
 				>;
 
@@ -134,13 +134,13 @@ leds {
 
 		led0 {
 			label = "led0";
-			gpios = <&pioD 0 1>;
+			gpios = <&pioD 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
 		};
 
 		led1 {
 			label = "led1";
-			gpios = <&pioD 31 0>;
+			gpios = <&pioD 31 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
@@ -152,13 +152,13 @@ gpio_keys {
 
 		right {
 			label = "SW4";
-			gpios = <&pioE 7 1>;
+			gpios = <&pioE 7 GPIO_ACTIVE_LOW>;
 			linux,code = <106>;
 		};
 
 		up {
 			label = "SW3";
-			gpios = <&pioE 8 1>;
+			gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
 			linux,code = <103>;
 		};
 	};

arch/arm/boot/dts/sama5d31ek.dts

@@ -7,8 +7,8 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "sama5d3xmb.dtsi"
-/include/ "sama5d3xdm.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
 
 / {
 	model = "Atmel SAMA5D31-EK";
@@ -41,7 +41,7 @@ macb1: ethernet@f802c000 {
 	leds {
 		d3 {
 			label = "d3";
-			gpios = <&pioE 24 0>;
+			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
 		};
 	};
 

arch/arm/boot/dts/sama5d33ek.dts

@@ -7,8 +7,8 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "sama5d3xmb.dtsi"
-/include/ "sama5d3xdm.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
 
 / {
 	model = "Atmel SAMA5D33-EK";

arch/arm/boot/dts/sama5d3xdm.dtsi

@@ -33,7 +33,7 @@ pinctrl@fffff200 {
 				board {
 					pinctrl_qt1070_irq: qt1070_irq {
 						atmel,pins =
-							<4 31 0x0 0x5>; /* PE31 GPIO with pull up deglith */
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pull up deglith */
 					};
 				};
 			};