Merge tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux

Pull devicetree bug fixes and documentation updates from Grant Likely:
 "A few bugfixes for the new DT overlay feature, documentation updates,
  spelling corrections, and changes to MAINTAINERS.  Nothing earth
  shattering here"

* tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux:
  of/unittest: Overlays with sub-devices tests
  of/platform: Handle of_populate drivers in notifier
  of/overlay: Do not generate duplicate nodes
  devicetree: document the "qemu" and "virtio" vendor prefixes
  devicetree: document ARM bindings for QEMU's Firmware Config interface
  Documentation: of: fix typo in graph bindings
  dma-mapping: fix debug print to display correct dma_pfn_offset
  of: replace Asahi Kasei Corp vendor prefix
  ARM: dt: GIC: Spelling s/specific/specifier/, s/flaggs/flags/
  dt/bindings: arm-boards: Spelling s/pointong/pointing/
  MAINTAINERS: Update DT website and git repository
  MAINTAINERS: drop DT regex matching on of_get_property and of_match_table

Documentation/devicetree/bindings/arm/arm-boards

@@ -23,7 +23,7 @@ Required nodes:
     range of 0x200 bytes.
 
 - syscon: the root node of the Integrator platforms must have a
-  system controller node pointong to the control registers,
+  system controller node pointing to the control registers,
   with the compatible string
   "arm,integrator-ap-syscon"
   "arm,integrator-cp-syscon"

Documentation/devicetree/bindings/arm/fw-cfg.txt

+* QEMU Firmware Configuration bindings for ARM
+
+QEMU's arm-softmmu and aarch64-softmmu emulation / virtualization targets
+provide the following Firmware Configuration interface on the "virt" machine
+type:
+
+- A write-only, 16-bit wide selector (or control) register,
+- a read-write, 64-bit wide data register.
+
+QEMU exposes the control and data register to ARM guests as memory mapped
+registers; their location is communicated to the guest's UEFI firmware in the
+DTB that QEMU places at the bottom of the guest's DRAM.
+
+The guest writes a selector value (a key) to the selector register, and then
+can read the corresponding data (produced by QEMU) via the data register. If
+the selected entry is writable, the guest can rewrite it through the data
+register.
+
+The selector register takes keys in big endian byte order.
+
+The data register allows accesses with 8, 16, 32 and 64-bit width (only at
+offset 0 of the register). Accesses larger than a byte are interpreted as
+arrays, bundled together only for better performance. The bytes constituting
+such a word, in increasing address order, correspond to the bytes that would
+have been transferred by byte-wide accesses in chronological order.
+
+The interface allows guest firmware to download various parameters and blobs
+that affect how the firmware works and what tables it installs for the guest
+OS. For example, boot order of devices, ACPI tables, SMBIOS tables, kernel and
+initrd images for direct kernel booting, virtual machine UUID, SMP information,
+virtual NUMA topology, and so on.
+
+The authoritative registry of the valid selector values and their meanings is
+the QEMU source code; the structure of the data blobs corresponding to the
+individual key values is also defined in the QEMU source code.
+
+The presence of the registers can be verified by selecting the "signature" blob
+with key 0x0000, and reading four bytes from the data register. The returned
+signature is "QEMU".
+
+The outermost protocol (involving the write / read sequences of the control and
+data registers) is expected to be versioned, and/or described by feature bits.
+The interface revision / feature bitmap can be retrieved with key 0x0001. The
+blob to be read from the data register has size 4, and it is to be interpreted
+as a uint32_t value in little endian byte order. The current value
+(corresponding to the above outer protocol) is zero.
+
+The guest kernel is not expected to use these registers (although it is
+certainly allowed to); the device tree bindings are documented here because
+this is where device tree bindings reside in general.
+
+Required properties:
+
+- compatible: "qemu,fw-cfg-mmio".
+
+- reg: the MMIO region used by the device.
+  * Bytes 0x0 to 0x7 cover the data register.
+  * Bytes 0x8 to 0x9 cover the selector register.
+  * Further registers may be appended to the region in case of future interface
+    revisions / feature bits.
+
+Example:
+
+/ {
+	#size-cells = <0x2>;
+	#address-cells = <0x2>;
+
+	fw-cfg@9020000 {
+		compatible = "qemu,fw-cfg-mmio";
+		reg = <0x0 0x9020000 0x0 0xa>;
+	};
+};

Documentation/devicetree/bindings/graph.txt

@@ -19,7 +19,7 @@ type of the connections, they just map their existence. Specific properties
 may be described by specialized bindings depending on the type of connection.
 
 To see how this binding applies to video pipelines, for example, see
-Documentation/device-tree/bindings/media/video-interfaces.txt.
+Documentation/devicetree/bindings/media/video-interfaces.txt.
 Here the ports describe data interfaces, and the links between them are
 the connecting data buses. A single port with multiple connections can
 correspond to multiple devices being connected to the same physical bus.

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -9,7 +9,6 @@ ad	Avionic Design GmbH
 adapteva	Adapteva, Inc.
 adi	Analog Devices, Inc.
 aeroflexgaisler	Aeroflex Gaisler AB
-ak	Asahi Kasei Corp.
 allwinner	Allwinner Technology Co., Ltd.
 altr	Altera Corp.
 amcc	Applied Micro Circuits Corporation (APM, formally AMCC)
@@ -20,6 +19,7 @@ amstaos	AMS-Taos Inc.
 apm	Applied Micro Circuits Corporation (APM)
 arm	ARM Ltd.
 armadeus	ARMadeus Systems SARL
+asahi-kasei	Asahi Kasei Corp.
 atmel	Atmel Corporation
 auo	AU Optronics Corporation
 avago	Avago Technologies
@@ -127,6 +127,7 @@ pixcir  PIXCIR MICROELECTRONICS Co., Ltd
 powervr	PowerVR (deprecated, use img)
 qca	Qualcomm Atheros, Inc.
 qcom	Qualcomm Technologies, Inc
+qemu	QEMU, a generic and open source machine emulator and virtualizer
 qnap	QNAP Systems, Inc.
 radxa	Radxa
 raidsonic	RaidSonic Technology GmbH
@@ -168,6 +169,7 @@ usi	Universal Scientific Industrial Co., Ltd.
 v3	V3 Semiconductor
 variscite	Variscite Ltd.
 via	VIA Technologies, Inc.
+virtio	Virtual I/O Device Specification, developed by the OASIS consortium
 voipac	Voipac Technologies s.r.o.
 winbond Winbond Electronics corp.
 wlf	Wolfson Microelectronics

MAINTAINERS

@@ -7024,14 +7024,12 @@ OPEN FIRMWARE AND FLATTENED DEVICE TREE
 M:	Grant Likely <grant.likely@linaro.org>
 M:	Rob Herring <robh+dt@kernel.org>
 L:	devicetree@vger.kernel.org
-W:	http://fdt.secretlab.ca
-T:	git git://git.secretlab.ca/git/linux-2.6.git
+W:	http://www.devicetree.org/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux.git
 S:	Maintained
 F:	drivers/of/
 F:	include/linux/of*.h
 F:	scripts/dtc/
-K:	of_get_property
-K:	of_match_table
 
 OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
 M:	Rob Herring <robh+dt@kernel.org>

arch/arm/boot/dts/tegra20-seaboard.dts

@@ -406,7 +406,7 @@ i2c@7000d000 {
 		clock-frequency = <400000>;
 
 		magnetometer@c {
-			compatible = "ak,ak8975";
+			compatible = "asahi-kasei,ak8975";
 			reg = <0xc>;
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_LEVEL_HIGH>;

drivers/of/overlay.c

@@ -114,17 +114,6 @@ static int of_overlay_apply_single_device_node(struct of_overlay *ov,
 		ret = of_overlay_apply_one(ov, tchild, child);
 		if (ret)
 			return ret;
-
-		/* The properties are already copied, now do the child nodes */
-		for_each_child_of_node(child, grandchild) {
-			ret = of_overlay_apply_single_device_node(ov, tchild, grandchild);
-			if (ret) {
-				pr_err("%s: Failed to apply single node @%s/%s\n",
-					__func__, tchild->full_name,
-					grandchild->name);
-				return ret;
-			}
-		}
 	}
 
 	return ret;

drivers/of/platform.c

@@ -188,7 +188,7 @@ static void of_dma_configure(struct device *dev)
 		size = dev->coherent_dma_mask;
 	} else {
 		offset = PFN_DOWN(paddr - dma_addr);
-		dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", dev->dma_pfn_offset);
+		dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", offset);
 	}
 	dev->dma_pfn_offset = offset;
 
@@ -566,6 +566,10 @@ static int of_platform_notify(struct notifier_block *nb,
 		if (!of_node_check_flag(rd->dn->parent, OF_POPULATED_BUS))
 			return NOTIFY_OK;	/* not for us */
 
+		/* already populated? (driver using of_populate manually) */
+		if (of_node_check_flag(rd->dn, OF_POPULATED))
+			return NOTIFY_OK;
+
 		/* pdev_parent may be NULL when no bus platform device */
 		pdev_parent = of_find_device_by_node(rd->dn->parent);
 		pdev = of_platform_device_create(rd->dn, NULL,
@@ -581,6 +585,11 @@ static int of_platform_notify(struct notifier_block *nb,
 		break;
 
 	case OF_RECONFIG_CHANGE_REMOVE:
+
+		/* already depopulated? */
+		if (!of_node_check_flag(rd->dn, OF_POPULATED))
+			return NOTIFY_OK;
+
 		/* find our device by node */
 		pdev = of_find_device_by_node(rd->dn);
 		if (pdev == NULL)

drivers/of/unittest-data/tests-overlay.dtsi

@@ -176,5 +176,60 @@ __overlay__ {
 			};
 		};
 
+		overlay10 {
+			fragment@0 {
+				target-path = "/testcase-data/overlay-node/test-bus";
+				__overlay__ {
+
+					/* suppress DTC warning */
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					test-selftest10 {
+						compatible = "selftest";
+						status = "okay";
+						reg = <10>;
+
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						test-selftest101 {
+							compatible = "selftest";
+							status = "okay";
+							reg = <1>;
+						};
+
+					};
+				};
+			};
+		};
+
+		overlay11 {
+			fragment@0 {
+				target-path = "/testcase-data/overlay-node/test-bus";
+				__overlay__ {
+
+					/* suppress DTC warning */
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					test-selftest11 {
+						compatible = "selftest";
+						status = "okay";
+						reg = <11>;
+
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						test-selftest111 {
+							compatible = "selftest";
+							status = "okay";
+							reg = <1>;
+						};
+
+					};
+				};
+			};
+		};
 	};
 };

drivers/of/unittest.c

@@ -978,6 +978,9 @@ static int selftest_probe(struct platform_device *pdev)
 	}
 
 	dev_dbg(dev, "%s for node @%s\n", __func__, np->full_name);
+
+	of_platform_populate(np, NULL, NULL, &pdev->dev);
+
 	return 0;
 }
 
@@ -1385,6 +1388,39 @@ static void of_selftest_overlay_8(void)
 	selftest(1, "overlay test %d passed\n", 8);
 }
 
+/* test insertion of a bus with parent devices */
+static void of_selftest_overlay_10(void)
+{
+	int ret;
+	char *child_path;
+
+	/* device should disable */
+	ret = of_selftest_apply_overlay_check(10, 10, 0, 1);
+	if (selftest(ret == 0, "overlay test %d failed; overlay application\n", 10))
+		return;
+
+	child_path = kasprintf(GFP_KERNEL, "%s/test-selftest101",
+			selftest_path(10));
+	if (selftest(child_path, "overlay test %d failed; kasprintf\n", 10))
+		return;
+
+	ret = of_path_platform_device_exists(child_path);
+	kfree(child_path);
+	if (selftest(ret, "overlay test %d failed; no child device\n", 10))
+		return;
+}
+
+/* test insertion of a bus with parent devices (and revert) */
+static void of_selftest_overlay_11(void)
+{
+	int ret;
+
+	/* device should disable */
+	ret = of_selftest_apply_revert_overlay_check(11, 11, 0, 1);
+	if (selftest(ret == 0, "overlay test %d failed; overlay application\n", 11))
+		return;
+}
+
 static void __init of_selftest_overlay(void)
 {
 	struct device_node *bus_np = NULL;
@@ -1433,6 +1469,9 @@ static void __init of_selftest_overlay(void)
 	of_selftest_overlay_6();
 	of_selftest_overlay_8();
 
+	of_selftest_overlay_10();
+	of_selftest_overlay_11();
+
 out:
 	of_node_put(bus_np);
 }

include/dt-bindings/interrupt-controller/arm-gic.h

@@ -7,14 +7,14 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 
-/* interrupt specific cell 0 */
+/* interrupt specifier cell 0 */
 
 #define GIC_SPI 0
 #define GIC_PPI 1
 
 /*
  * Interrupt specifier cell 2.
- * The flaggs in irq.h are valid, plus those below.
+ * The flags in irq.h are valid, plus those below.
  */
 #define GIC_CPU_MASK_RAW(x) ((x) << 8)
 #define GIC_CPU_MASK_SIMPLE(num) GIC_CPU_MASK_RAW((1 << (num)) - 1)