[ARM] Make jornada720 build again

- Add missing include files.
- Fail to set pcmcia socket state for invalid socket numbers.
- Fix locla_ typo.
- Make pcmcia_jornada720_exit __devexit, not __exit.
- Don't initialise jornada720 machine specifics if not running
  on jornada720.

arch/arm/mach-sa1100/jornada720.c

@@ -6,9 +6,13 @@
 #include <linux/kernel.h>
 #include <linux/tty.h>
 #include <linux/delay.h>
+#include <linux/device.h>
 #include <linux/ioport.h>
 
 #include <asm/hardware.h>
+#include <asm/hardware/sa1111.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
 #include <asm/setup.h>
 
 #include <asm/mach/arch.h>
@@ -19,12 +23,12 @@
 
 
 #define JORTUCR_VAL	0x20000400
-#define JORSKCR_INIT	0x00002081	/* Turn off VCO to enable PLL, set Ready En and enable nOE assertion from DC */
-#define JORSKCR_RCLK	0x00002083	/* Add turning on RCLK to above */
-#define JORSKCR_VAL	0x0000001B	/* sets the 1101 control register to on */
 
 static int __init jornada720_init(void)
 {
+	int ret = -ENODEV;
+
+	if (machine_is_jornada720()) {
 		GPDR |= GPIO_GPIO20;
 		TUCR = JORTUCR_VAL;	/* set the oscillator out to the SA-1101 */
 
@@ -34,18 +38,14 @@ static int __init jornada720_init(void)
 		udelay(1);
 		GPSR = GPIO_GPIO20;
 		udelay(20);
-	SKCR = JORSKCR_INIT;	/* Turn on the PLL, enable Ready and enable nOE assertion from DC */
-	mdelay(100);
-
-	SBI_SKCR = JORSKCR_RCLK;/* turn on the RCLOCK */
-	SBI_SMCR = 0x35;	/* initialize the SMC (debug SA-1111 reset */
-	PCCR = 0;		/* initialize the S2MC (debug SA-1111 reset) */
 
 		/* LDD4 is speaker, LDD3 is microphone */
 		PPSR &= ~(PPC_LDD3 | PPC_LDD4);
 		PPDR |= PPC_LDD3 | PPC_LDD4;
 
-	return sa1111_init(0x40000000, IRQ_GPIO1);
+		ret = sa1111_init(0x40000000, IRQ_GPIO1);
+	}
+	return ret;
 }
 
 arch_initcall(jornada720_init);

drivers/pcmcia/sa1100_jornada720.c

@@ -6,9 +6,12 @@
  */
 #include <linux/kernel.h>
 #include <linux/sched.h>
+#include <linux/device.h>
+#include <linux/errno.h>
 #include <linux/init.h>
 
 #include <asm/hardware.h>
+#include <asm/hardware/sa1111.h>
 #include <asm/mach-types.h>
 
 #include "sa1100_generic.h"
@@ -76,6 +79,9 @@ printk("%s(): config socket %d vcc %d vpp %d\n", __FUNCTION__,
     case 50:	pa_dwr_set = SOCKET1_POWER;			break;
     }
     break;
+
+  default:
+    return -1;
   }
 
   if (conf->vpp != conf->vcc && conf->vpp != 0) {
@@ -90,7 +96,7 @@ printk("%s(): config socket %d vcc %d vpp %d\n", __FUNCTION__,
 
     local_irq_save(flags);
     PA_DWR = (PA_DWR & ~pa_dwr_mask) | pa_dwr_set;
-    locla_irq_restore(flags);
+    local_irq_restore(flags);
   }
 
   return ret;
@@ -117,7 +123,7 @@ int __init pcmcia_jornada720_init(void)
 	return ret;
 }
 
-void __exit pcmcia_jornada720_exit(void)
+void __devexit pcmcia_jornada720_exit(void)
 {
 	sa1100_unregister_pcmcia(&jornada720_pcmcia_ops);
 }