Merge tag 'regmap-irq-unmask' into regmap-next

regmap: Support for split mask and unmask interrupt registers

This branch adds an interface for supporting devices which have separate
mask and unmask registers.

# gpg: Signature made Thu 17 Sep 2015 11:52:20 BST using RSA key ID 5D5487D0
# gpg: Oops: keyid_from_fingerprint: no pubkey
# gpg: Oops: keyid_from_fingerprint: no pubkey
# gpg: key 00000000 occurs more than once in the trustdb
# gpg: key 16005C11: no public key for trusted key - skipped
# gpg: key 16005C11 marked as ultimately trusted
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

drivers/base/regmap/regmap-irq.c

@@ -63,6 +63,7 @@ static void regmap_irq_sync_unlock(struct irq_data *data)
 	struct regmap *map = d->map;
 	int i, ret;
 	u32 reg;
+	u32 unmask_offset;
 
 	if (d->chip->runtime_pm) {
 		ret = pm_runtime_get_sync(map->dev);
@@ -79,12 +80,28 @@ static void regmap_irq_sync_unlock(struct irq_data *data)
 	for (i = 0; i < d->chip->num_regs; i++) {
 		reg = d->chip->mask_base +
 			(i * map->reg_stride * d->irq_reg_stride);
-		if (d->chip->mask_invert)
+		if (d->chip->mask_invert) {
 			ret = regmap_update_bits(d->map, reg,
 					 d->mask_buf_def[i], ~d->mask_buf[i]);
-		else
+		} else if (d->chip->unmask_base) {
+			/* set mask with mask_base register */
+			ret = regmap_update_bits(d->map, reg,
+					d->mask_buf_def[i], ~d->mask_buf[i]);
+			if (ret < 0)
+				dev_err(d->map->dev,
+					"Failed to sync unmasks in %x\n",
+					reg);
+			unmask_offset = d->chip->unmask_base -
+							d->chip->mask_base;
+			/* clear mask with unmask_base register */
+			ret = regmap_update_bits(d->map,
+					reg + unmask_offset,
+					d->mask_buf_def[i],
+					d->mask_buf[i]);
+		} else {
 			ret = regmap_update_bits(d->map, reg,
 					 d->mask_buf_def[i], d->mask_buf[i]);
+		}
 		if (ret != 0)
 			dev_err(d->map->dev, "Failed to sync masks in %x\n",
 				reg);
@@ -116,6 +133,10 @@ static void regmap_irq_sync_unlock(struct irq_data *data)
 		if (d->mask_buf[i] && (d->chip->ack_base || d->chip->use_ack)) {
 			reg = d->chip->ack_base +
 				(i * map->reg_stride * d->irq_reg_stride);
+			/* some chips ack by write 0 */
+			if (d->chip->ack_invert)
+				ret = regmap_write(map, reg, ~d->mask_buf[i]);
+			else
 				ret = regmap_write(map, reg, d->mask_buf[i]);
 			if (ret != 0)
 				dev_err(d->map->dev, "Failed to ack 0x%x: %d\n",
@@ -339,6 +360,7 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
 	int i;
 	int ret = -ENOMEM;
 	u32 reg;
+	u32 unmask_offset;
 
 	if (chip->num_regs <= 0)
 		return -EINVAL;
@@ -420,7 +442,14 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
 		if (chip->mask_invert)
 			ret = regmap_update_bits(map, reg,
 					 d->mask_buf[i], ~d->mask_buf[i]);
-		else
+		else if (d->chip->unmask_base) {
+			unmask_offset = d->chip->unmask_base -
+					d->chip->mask_base;
+			ret = regmap_update_bits(d->map,
+					reg + unmask_offset,
+					d->mask_buf[i],
+					d->mask_buf[i]);
+		} else
 			ret = regmap_update_bits(map, reg,
 					 d->mask_buf[i], d->mask_buf[i]);
 		if (ret != 0) {
@@ -445,6 +474,10 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
 		if (d->status_buf[i] && (chip->ack_base || chip->use_ack)) {
 			reg = chip->ack_base +
 				(i * map->reg_stride * d->irq_reg_stride);
+			if (chip->ack_invert)
+				ret = regmap_write(map, reg,
+					~(d->status_buf[i] & d->mask_buf[i]));
+			else
 				ret = regmap_write(map, reg,
 					d->status_buf[i] & d->mask_buf[i]);
 			if (ret != 0) {

include/linux/regmap.h

@@ -800,6 +800,8 @@ struct regmap_irq {
  *
  * @status_base: Base status register address.
  * @mask_base:   Base mask register address.
+ * @unmask_base:  Base unmask register address. for chips who have
+ *                separate mask and unmask registers
  * @ack_base:    Base ack address. If zero then the chip is clear on read.
  *               Using zero value is possible with @use_ack bit.
  * @wake_base:   Base address for wake enables.  If zero unsupported.
@@ -807,6 +809,7 @@ struct regmap_irq {
  * @init_ack_masked: Ack all masked interrupts once during initalization.
  * @mask_invert: Inverted mask register: cleared bits are masked out.
  * @use_ack:     Use @ack register even if it is zero.
+ * @ack_invert:  Inverted ack register: cleared bits for ack.
  * @wake_invert: Inverted wake register: cleared bits are wake enabled.
  * @runtime_pm:  Hold a runtime PM lock on the device when accessing it.
  *
@@ -820,12 +823,14 @@ struct regmap_irq_chip {
 
 	unsigned int status_base;
 	unsigned int mask_base;
+	unsigned int unmask_base;
 	unsigned int ack_base;
 	unsigned int wake_base;
 	unsigned int irq_reg_stride;
 	bool init_ack_masked:1;
 	bool mask_invert:1;
 	bool use_ack:1;
+	bool ack_invert:1;
 	bool wake_invert:1;
 	bool runtime_pm:1;