Add IBM power RAID driver 2.0.6

From: 	Brian King <brking@us.ibm.com>

MAINTAINERS

@@ -974,6 +974,11 @@ M:	langa2@kph.uni-mainz.de
 W:	http://www.uni-mainz.de/~langm000/linux.html
 S:	Maintained
 
+IBM Power Linux RAID adapter
+P:	Brian King
+M:	brking@us.ibm.com
+S:	Supported
+
 IBM ServeRAID RAID DRIVER
 P:	Jack Hammer
 P:	Dave Jeffery

drivers/pci/pci.ids

@@ -1820,6 +1820,8 @@
 	0010  DAC960PX
 	0050  AcceleRAID 352/170/160 support Device
 	b166  Gemstone chipset SCSI controller
+		1014 0266  Dual Channel PCI-X U320 SCSI Adapter
+		1014 0278  Dual Channel PCI-X U320 SCSI RAID Adapter
 	ba55  eXtremeRAID 1100 support Device
 	ba56  eXtremeRAID 2000/3000 support Device
 106a  Aten Research Inc

drivers/scsi/Kconfig

@@ -979,6 +979,31 @@ config SCSI_SYM53C8XX_IOMAPPED
 	  the card.  This is significantly slower then using memory
 	  mapped IO.  Most people should answer N.
 
+config SCSI_IPR
+	tristate "IBM Power Linux RAID adapter support"
+	depends on PCI && SCSI
+	select FW_LOADER
+	---help---
+	  This driver supports the IBM Power Linux family RAID adapters.
+	  This includes IBM pSeries 5712, 5703, 5709, and 570A, as well
+	  as IBM iSeries 5702, 5703, 5709, and 570A.
+
+config SCSI_IPR_TRACE
+	bool "enable driver internal trace"
+	depends on SCSI_IPR
+	help
+	  If you say Y here, the driver will trace all commands issued
+	  to the adapter. Performance impact is minimal. Trace can be
+	  dumped using /sys/bus/class/scsi_host/hostXX/trace.
+
+config SCSI_IPR_DUMP
+	bool "enable adapter dump support"
+	depends on SCSI_IPR
+	help
+	  If you say Y here, the driver will support adapter crash dump.
+	  If you enable this support, the iprdump daemon can be used
+	  to capture adapter failure analysis information.
+
 config SCSI_ZALON
 	tristate "Zalon SCSI support"
 	depends on GSC && SCSI

drivers/scsi/Makefile

@@ -118,6 +118,7 @@ obj-$(CONFIG_SCSI_FCAL)		+= fcal.o
 obj-$(CONFIG_SCSI_CPQFCTS)	+= cpqfc.o
 obj-$(CONFIG_SCSI_LASI700)	+= 53c700.o lasi700.o
 obj-$(CONFIG_SCSI_NSP32)	+= nsp32.o
+obj-$(CONFIG_SCSI_IPR)		+= ipr.o
 obj-$(CONFIG_SCSI_SATA_SVW)	+= libata.o sata_svw.o
 obj-$(CONFIG_SCSI_ATA_PIIX)	+= libata.o ata_piix.o
 obj-$(CONFIG_SCSI_SATA_PROMISE)	+= libata.o sata_promise.o