Commit baa03522 authored by Tiejun Chen's avatar Tiejun Chen Committed by Paolo Bonzini

kvm: x86: vmx: reorder some msr writing

The commit 34a1cd60, "x86: vmx: move some vmx setting from
vmx_init() to hardware_setup()", tried to refactor some codes
specific to vmx hardware setting into hardware_setup(), but some
msr writing should depend on our previous setting condition like
enable_apicv, enable_ept and so on.
Reported-by: default avatarJamie Heilman <jamie@audible.transient.net>
Tested-by: default avatarJamie Heilman <jamie@audible.transient.net>
Signed-off-by: default avatarTiejun Chen <tiejun.chen@intel.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
parent 97bf6af1
...@@ -5840,49 +5840,6 @@ static __init int hardware_setup(void) ...@@ -5840,49 +5840,6 @@ static __init int hardware_setup(void)
memset(vmx_msr_bitmap_legacy, 0xff, PAGE_SIZE); memset(vmx_msr_bitmap_legacy, 0xff, PAGE_SIZE);
memset(vmx_msr_bitmap_longmode, 0xff, PAGE_SIZE); memset(vmx_msr_bitmap_longmode, 0xff, PAGE_SIZE);
vmx_disable_intercept_for_msr(MSR_FS_BASE, false);
vmx_disable_intercept_for_msr(MSR_GS_BASE, false);
vmx_disable_intercept_for_msr(MSR_KERNEL_GS_BASE, true);
vmx_disable_intercept_for_msr(MSR_IA32_SYSENTER_CS, false);
vmx_disable_intercept_for_msr(MSR_IA32_SYSENTER_ESP, false);
vmx_disable_intercept_for_msr(MSR_IA32_SYSENTER_EIP, false);
vmx_disable_intercept_for_msr(MSR_IA32_BNDCFGS, true);
memcpy(vmx_msr_bitmap_legacy_x2apic,
vmx_msr_bitmap_legacy, PAGE_SIZE);
memcpy(vmx_msr_bitmap_longmode_x2apic,
vmx_msr_bitmap_longmode, PAGE_SIZE);
if (enable_apicv) {
for (msr = 0x800; msr <= 0x8ff; msr++)
vmx_disable_intercept_msr_read_x2apic(msr);
/* According SDM, in x2apic mode, the whole id reg is used.
* But in KVM, it only use the highest eight bits. Need to
* intercept it */
vmx_enable_intercept_msr_read_x2apic(0x802);
/* TMCCT */
vmx_enable_intercept_msr_read_x2apic(0x839);
/* TPR */
vmx_disable_intercept_msr_write_x2apic(0x808);
/* EOI */
vmx_disable_intercept_msr_write_x2apic(0x80b);
/* SELF-IPI */
vmx_disable_intercept_msr_write_x2apic(0x83f);
}
if (enable_ept) {
kvm_mmu_set_mask_ptes(0ull,
(enable_ept_ad_bits) ? VMX_EPT_ACCESS_BIT : 0ull,
(enable_ept_ad_bits) ? VMX_EPT_DIRTY_BIT : 0ull,
0ull, VMX_EPT_EXECUTABLE_MASK);
ept_set_mmio_spte_mask();
kvm_enable_tdp();
} else
kvm_disable_tdp();
update_ple_window_actual_max();
if (setup_vmcs_config(&vmcs_config) < 0) { if (setup_vmcs_config(&vmcs_config) < 0) {
r = -EIO; r = -EIO;
goto out7; goto out7;
...@@ -5945,6 +5902,49 @@ static __init int hardware_setup(void) ...@@ -5945,6 +5902,49 @@ static __init int hardware_setup(void)
if (nested) if (nested)
nested_vmx_setup_ctls_msrs(); nested_vmx_setup_ctls_msrs();
vmx_disable_intercept_for_msr(MSR_FS_BASE, false);
vmx_disable_intercept_for_msr(MSR_GS_BASE, false);
vmx_disable_intercept_for_msr(MSR_KERNEL_GS_BASE, true);
vmx_disable_intercept_for_msr(MSR_IA32_SYSENTER_CS, false);
vmx_disable_intercept_for_msr(MSR_IA32_SYSENTER_ESP, false);
vmx_disable_intercept_for_msr(MSR_IA32_SYSENTER_EIP, false);
vmx_disable_intercept_for_msr(MSR_IA32_BNDCFGS, true);
memcpy(vmx_msr_bitmap_legacy_x2apic,
vmx_msr_bitmap_legacy, PAGE_SIZE);
memcpy(vmx_msr_bitmap_longmode_x2apic,
vmx_msr_bitmap_longmode, PAGE_SIZE);
if (enable_apicv) {
for (msr = 0x800; msr <= 0x8ff; msr++)
vmx_disable_intercept_msr_read_x2apic(msr);
/* According SDM, in x2apic mode, the whole id reg is used.
* But in KVM, it only use the highest eight bits. Need to
* intercept it */
vmx_enable_intercept_msr_read_x2apic(0x802);
/* TMCCT */
vmx_enable_intercept_msr_read_x2apic(0x839);
/* TPR */
vmx_disable_intercept_msr_write_x2apic(0x808);
/* EOI */
vmx_disable_intercept_msr_write_x2apic(0x80b);
/* SELF-IPI */
vmx_disable_intercept_msr_write_x2apic(0x83f);
}
if (enable_ept) {
kvm_mmu_set_mask_ptes(0ull,
(enable_ept_ad_bits) ? VMX_EPT_ACCESS_BIT : 0ull,
(enable_ept_ad_bits) ? VMX_EPT_DIRTY_BIT : 0ull,
0ull, VMX_EPT_EXECUTABLE_MASK);
ept_set_mmio_spte_mask();
kvm_enable_tdp();
} else
kvm_disable_tdp();
update_ple_window_actual_max();
return alloc_kvm_area(); return alloc_kvm_area();
out7: out7:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment