i2c: OMAP2/3: Fix scll/sclh calculations

Fix scll/sclh calculations for HS and fast modes. Currently the driver
uses equal (roughly) low/high times which will result in too short
low time.

OMAP3430 TRM gives the following equations:

	F/S: tLow  = (scll + 7) * internal_clk
	     tHigh = (sclh + 5) * internal_clk
	HS:  tLow  = (scll + 7) * fclk
	     tHigh = (sclh + 5) * fclk

Furthermore, the I2C specification sets the following minimum values
for HS tLow/tHigh for capacitive bus loads 100 pF (maximum speed 3400)
and 400 pF (maximum speed 1700):

	speed	tLow		tHigh
	3400	160 ns		60 ns
	1700	320 ns		120 ns

and for F/S:

	speed	tLow		tHigh
	400	1300 ns		600 ns
	100	4700 ns		4000 ns

By using duty cycles 33/66 (HS, F) and 50/50 (S) we stay above these
minimum values.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

drivers/i2c/busses/i2c-omap.c

@@ -343,17 +343,28 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 
 		/* If configured for High Speed */
 		if (dev->speed > 400) {
+			unsigned long scl;
+
 			/* For first phase of HS mode */
-			fsscll = internal_clk / (400 * 2) - 6;
-			fssclh = internal_clk / (400 * 2) - 6;
+			scl = internal_clk / 400;
+			fsscll = scl - (scl / 3) - 7;
+			fssclh = (scl / 3) - 5;
 
 			/* For second phase of HS mode */
-			hsscll = fclk_rate / (dev->speed * 2) - 6;
-			hssclh = fclk_rate / (dev->speed * 2) - 6;
+			scl = fclk_rate / dev->speed;
+			hsscll = scl - (scl / 3) - 7;
+			hssclh = (scl / 3) - 5;
+		} else if (dev->speed > 100) {
+			unsigned long scl;
+
+			/* Fast mode */
+			scl = internal_clk / dev->speed;
+			fsscll = scl - (scl / 3) - 7;
+			fssclh = (scl / 3) - 5;
 		} else {
-			/* To handle F/S modes */
-			fsscll = internal_clk / (dev->speed * 2) - 6;
-			fssclh = internal_clk / (dev->speed * 2) - 6;
+			/* Standard mode */
+			fsscll = internal_clk / (dev->speed * 2) - 7;
+			fssclh = internal_clk / (dev->speed * 2) - 5;
 		}
 		scll = (hsscll << OMAP_I2C_SCLL_HSSCLL) | fsscll;
 		sclh = (hssclh << OMAP_I2C_SCLH_HSSCLH) | fssclh;