Commit bb61ce54 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'media/v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:
 "Media regression fixes:

   - serial_ir: fix a Kernel crash during boot on Kernel 4.11-rc1, due
     to an IRQ code called too early

   - other IR regression fixes at lirc and at the raw IR decoding

   - a deadlock fix at the RC nuvoton driver

   - fix another issue with DMA on stack at dw2102 driver

  There's an extra patch there that change a driver interface for the
  SoC VSP1 driver, with is shared between the DRM and V4L2 driver. The
  patch itself is trivial, and was acked by David Arlie"

* tag 'media/v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] v4l: vsp1: Adapt vsp1_du_setup_lif() interface to use a structure
  [media] dw2102: don't do DMA on stack
  [media] rc: protocol is not set on register for raw IR devices
  [media] rc: raw decoder for keymap protocol is not loaded on register
  [media] rc: nuvoton: fix deadlock in nvt_write_wakeup_codes
  [media] lirc: fix dead lock between open and wakeup_filter
  [media] serial_ir: ensure we're ready to receive interrupts
parents cb2113cb 8c71fff4
......@@ -32,6 +32,10 @@ void rcar_du_vsp_enable(struct rcar_du_crtc *crtc)
{
const struct drm_display_mode *mode = &crtc->crtc.state->adjusted_mode;
struct rcar_du_device *rcdu = crtc->group->dev;
struct vsp1_du_lif_config cfg = {
.width = mode->hdisplay,
.height = mode->vdisplay,
};
struct rcar_du_plane_state state = {
.state = {
.crtc = &crtc->crtc,
......@@ -66,12 +70,12 @@ void rcar_du_vsp_enable(struct rcar_du_crtc *crtc)
*/
crtc->group->need_restart = true;
vsp1_du_setup_lif(crtc->vsp->vsp, mode->hdisplay, mode->vdisplay);
vsp1_du_setup_lif(crtc->vsp->vsp, &cfg);
}
void rcar_du_vsp_disable(struct rcar_du_crtc *crtc)
{
vsp1_du_setup_lif(crtc->vsp->vsp, 0, 0);
vsp1_du_setup_lif(crtc->vsp->vsp, NULL);
}
void rcar_du_vsp_atomic_begin(struct rcar_du_crtc *crtc)
......
......@@ -54,12 +54,11 @@ EXPORT_SYMBOL_GPL(vsp1_du_init);
/**
* vsp1_du_setup_lif - Setup the output part of the VSP pipeline
* @dev: the VSP device
* @width: output frame width in pixels
* @height: output frame height in pixels
* @cfg: the LIF configuration
*
* Configure the output part of VSP DRM pipeline for the given frame @width and
* @height. This sets up formats on the BRU source pad, the WPF0 sink and source
* pads, and the LIF sink pad.
* Configure the output part of VSP DRM pipeline for the given frame @cfg.width
* and @cfg.height. This sets up formats on the BRU source pad, the WPF0 sink
* and source pads, and the LIF sink pad.
*
* As the media bus code on the BRU source pad is conditioned by the
* configuration of the BRU sink 0 pad, we also set up the formats on all BRU
......@@ -69,8 +68,7 @@ EXPORT_SYMBOL_GPL(vsp1_du_init);
*
* Return 0 on success or a negative error code on failure.
*/
int vsp1_du_setup_lif(struct device *dev, unsigned int width,
unsigned int height)
int vsp1_du_setup_lif(struct device *dev, const struct vsp1_du_lif_config *cfg)
{
struct vsp1_device *vsp1 = dev_get_drvdata(dev);
struct vsp1_pipeline *pipe = &vsp1->drm->pipe;
......@@ -79,11 +77,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width,
unsigned int i;
int ret;
dev_dbg(vsp1->dev, "%s: configuring LIF with format %ux%u\n",
__func__, width, height);
if (width == 0 || height == 0) {
/* Zero width or height means the CRTC is being disabled, stop
if (!cfg) {
/* NULL configuration means the CRTC is being disabled, stop
* the pipeline and turn the light off.
*/
ret = vsp1_pipeline_stop(pipe);
......@@ -108,6 +103,9 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width,
return 0;
}
dev_dbg(vsp1->dev, "%s: configuring LIF with format %ux%u\n",
__func__, cfg->width, cfg->height);
/* Configure the format at the BRU sinks and propagate it through the
* pipeline.
*/
......@@ -117,8 +115,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width,
for (i = 0; i < bru->entity.source_pad; ++i) {
format.pad = i;
format.format.width = width;
format.format.height = height;
format.format.width = cfg->width;
format.format.height = cfg->height;
format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
format.format.field = V4L2_FIELD_NONE;
......@@ -133,8 +131,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width,
}
format.pad = bru->entity.source_pad;
format.format.width = width;
format.format.height = height;
format.format.width = cfg->width;
format.format.height = cfg->height;
format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
format.format.field = V4L2_FIELD_NONE;
......@@ -180,7 +178,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width,
/* Verify that the format at the output of the pipeline matches the
* requested frame size and media bus code.
*/
if (format.format.width != width || format.format.height != height ||
if (format.format.width != cfg->width ||
format.format.height != cfg->height ||
format.format.code != MEDIA_BUS_FMT_ARGB8888_1X32) {
dev_dbg(vsp1->dev, "%s: format mismatch\n", __func__);
return -EPIPE;
......
......@@ -436,6 +436,8 @@ int lirc_dev_fop_open(struct inode *inode, struct file *file)
return -ERESTARTSYS;
ir = irctls[iminor(inode)];
mutex_unlock(&lirc_dev_lock);
if (!ir) {
retval = -ENODEV;
goto error;
......@@ -476,8 +478,6 @@ int lirc_dev_fop_open(struct inode *inode, struct file *file)
}
error:
mutex_unlock(&lirc_dev_lock);
nonseekable_open(inode, file);
return retval;
......
......@@ -176,12 +176,13 @@ static void nvt_write_wakeup_codes(struct rc_dev *dev,
{
u8 tolerance, config;
struct nvt_dev *nvt = dev->priv;
unsigned long flags;
int i;
/* hardcode the tolerance to 10% */
tolerance = DIV_ROUND_UP(count, 10);
spin_lock(&nvt->lock);
spin_lock_irqsave(&nvt->lock, flags);
nvt_clear_cir_wake_fifo(nvt);
nvt_cir_wake_reg_write(nvt, count, CIR_WAKE_FIFO_CMP_DEEP);
......@@ -203,7 +204,7 @@ static void nvt_write_wakeup_codes(struct rc_dev *dev,
nvt_cir_wake_reg_write(nvt, config, CIR_WAKE_IRCON);
spin_unlock(&nvt->lock);
spin_unlock_irqrestore(&nvt->lock, flags);
}
static ssize_t wakeup_data_show(struct device *dev,
......
......@@ -1663,6 +1663,7 @@ static int rc_setup_rx_device(struct rc_dev *dev)
{
int rc;
struct rc_map *rc_map;
u64 rc_type;
if (!dev->map_name)
return -EINVAL;
......@@ -1677,15 +1678,18 @@ static int rc_setup_rx_device(struct rc_dev *dev)
if (rc)
return rc;
if (dev->change_protocol) {
u64 rc_type = (1ll << rc_map->rc_type);
rc_type = BIT_ULL(rc_map->rc_type);
if (dev->change_protocol) {
rc = dev->change_protocol(dev, &rc_type);
if (rc < 0)
goto out_table;
dev->enabled_protocols = rc_type;
}
if (dev->driver_type == RC_DRIVER_IR_RAW)
ir_raw_load_modules(&rc_type);
set_bit(EV_KEY, dev->input_dev->evbit);
set_bit(EV_REP, dev->input_dev->evbit);
set_bit(EV_MSC, dev->input_dev->evbit);
......@@ -1777,12 +1781,6 @@ int rc_register_device(struct rc_dev *dev)
dev->input_name ?: "Unspecified device", path ?: "N/A");
kfree(path);
if (dev->driver_type != RC_DRIVER_IR_RAW_TX) {
rc = rc_setup_rx_device(dev);
if (rc)
goto out_dev;
}
if (dev->driver_type == RC_DRIVER_IR_RAW ||
dev->driver_type == RC_DRIVER_IR_RAW_TX) {
if (!raw_init) {
......@@ -1791,7 +1789,13 @@ int rc_register_device(struct rc_dev *dev)
}
rc = ir_raw_event_register(dev);
if (rc < 0)
goto out_rx;
goto out_dev;
}
if (dev->driver_type != RC_DRIVER_IR_RAW_TX) {
rc = rc_setup_rx_device(dev);
if (rc)
goto out_raw;
}
/* Allow the RC sysfs nodes to be accessible */
......@@ -1803,8 +1807,8 @@ int rc_register_device(struct rc_dev *dev)
return 0;
out_rx:
rc_free_rx_device(dev);
out_raw:
ir_raw_event_unregister(dev);
out_dev:
device_del(&dev->dev);
out_unlock:
......
......@@ -487,10 +487,69 @@ static void serial_ir_timeout(unsigned long arg)
ir_raw_event_handle(serial_ir.rcdev);
}
/* Needed by serial_ir_probe() */
static int serial_ir_tx(struct rc_dev *dev, unsigned int *txbuf,
unsigned int count);
static int serial_ir_tx_duty_cycle(struct rc_dev *dev, u32 cycle);
static int serial_ir_tx_carrier(struct rc_dev *dev, u32 carrier);
static int serial_ir_open(struct rc_dev *rcdev);
static void serial_ir_close(struct rc_dev *rcdev);
static int serial_ir_probe(struct platform_device *dev)
{
struct rc_dev *rcdev;
int i, nlow, nhigh, result;
rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW);
if (!rcdev)
return -ENOMEM;
if (hardware[type].send_pulse && hardware[type].send_space)
rcdev->tx_ir = serial_ir_tx;
if (hardware[type].set_send_carrier)
rcdev->s_tx_carrier = serial_ir_tx_carrier;
if (hardware[type].set_duty_cycle)
rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
switch (type) {
case IR_HOMEBREW:
rcdev->input_name = "Serial IR type home-brew";
break;
case IR_IRDEO:
rcdev->input_name = "Serial IR type IRdeo";
break;
case IR_IRDEO_REMOTE:
rcdev->input_name = "Serial IR type IRdeo remote";
break;
case IR_ANIMAX:
rcdev->input_name = "Serial IR type AnimaX";
break;
case IR_IGOR:
rcdev->input_name = "Serial IR type IgorPlug";
break;
}
rcdev->input_phys = KBUILD_MODNAME "/input0";
rcdev->input_id.bustype = BUS_HOST;
rcdev->input_id.vendor = 0x0001;
rcdev->input_id.product = 0x0001;
rcdev->input_id.version = 0x0100;
rcdev->open = serial_ir_open;
rcdev->close = serial_ir_close;
rcdev->dev.parent = &serial_ir.pdev->dev;
rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
rcdev->driver_name = KBUILD_MODNAME;
rcdev->map_name = RC_MAP_RC6_MCE;
rcdev->min_timeout = 1;
rcdev->timeout = IR_DEFAULT_TIMEOUT;
rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
rcdev->rx_resolution = 250000;
serial_ir.rcdev = rcdev;
setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
(unsigned long)&serial_ir);
result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
share_irq ? IRQF_SHARED : 0,
KBUILD_MODNAME, &hardware);
......@@ -516,9 +575,6 @@ static int serial_ir_probe(struct platform_device *dev)
return -EBUSY;
}
setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
(unsigned long)&serial_ir);
result = hardware_init_port();
if (result < 0)
return result;
......@@ -552,7 +608,8 @@ static int serial_ir_probe(struct platform_device *dev)
sense ? "low" : "high");
dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
return 0;
return devm_rc_register_device(&dev->dev, rcdev);
}
static int serial_ir_open(struct rc_dev *rcdev)
......@@ -723,7 +780,6 @@ static void serial_ir_exit(void)
static int __init serial_ir_init_module(void)
{
struct rc_dev *rcdev;
int result;
switch (type) {
......@@ -754,63 +810,9 @@ static int __init serial_ir_init_module(void)
sense = !!sense;
result = serial_ir_init();
if (result)
return result;
rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev, RC_DRIVER_IR_RAW);
if (!rcdev) {
result = -ENOMEM;
goto serial_cleanup;
}
if (hardware[type].send_pulse && hardware[type].send_space)
rcdev->tx_ir = serial_ir_tx;
if (hardware[type].set_send_carrier)
rcdev->s_tx_carrier = serial_ir_tx_carrier;
if (hardware[type].set_duty_cycle)
rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
switch (type) {
case IR_HOMEBREW:
rcdev->input_name = "Serial IR type home-brew";
break;
case IR_IRDEO:
rcdev->input_name = "Serial IR type IRdeo";
break;
case IR_IRDEO_REMOTE:
rcdev->input_name = "Serial IR type IRdeo remote";
break;
case IR_ANIMAX:
rcdev->input_name = "Serial IR type AnimaX";
break;
case IR_IGOR:
rcdev->input_name = "Serial IR type IgorPlug";
break;
}
rcdev->input_phys = KBUILD_MODNAME "/input0";
rcdev->input_id.bustype = BUS_HOST;
rcdev->input_id.vendor = 0x0001;
rcdev->input_id.product = 0x0001;
rcdev->input_id.version = 0x0100;
rcdev->open = serial_ir_open;
rcdev->close = serial_ir_close;
rcdev->dev.parent = &serial_ir.pdev->dev;
rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
rcdev->driver_name = KBUILD_MODNAME;
rcdev->map_name = RC_MAP_RC6_MCE;
rcdev->min_timeout = 1;
rcdev->timeout = IR_DEFAULT_TIMEOUT;
rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
rcdev->rx_resolution = 250000;
serial_ir.rcdev = rcdev;
result = rc_register_device(rcdev);
if (!result)
return 0;
serial_cleanup:
serial_ir_exit();
return result;
}
......@@ -818,7 +820,6 @@ static int __init serial_ir_init_module(void)
static void __exit serial_ir_exit_module(void)
{
del_timer_sync(&serial_ir.timeout_timer);
rc_unregister_device(serial_ir.rcdev);
serial_ir_exit();
}
......
......@@ -68,6 +68,7 @@
struct dw2102_state {
u8 initialized;
u8 last_lock;
u8 data[MAX_XFER_SIZE + 4];
struct i2c_client *i2c_client_demod;
struct i2c_client *i2c_client_tuner;
......@@ -661,62 +662,72 @@ static int su3000_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
u8 obuf[0x40], ibuf[0x40];
struct dw2102_state *state;
if (!d)
return -ENODEV;
state = d->priv;
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
if (mutex_lock_interruptible(&d->data_mutex) < 0) {
mutex_unlock(&d->i2c_mutex);
return -EAGAIN;
}
switch (num) {
case 1:
switch (msg[0].addr) {
case SU3000_STREAM_CTRL:
obuf[0] = msg[0].buf[0] + 0x36;
obuf[1] = 3;
obuf[2] = 0;
if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 0, 0) < 0)
state->data[0] = msg[0].buf[0] + 0x36;
state->data[1] = 3;
state->data[2] = 0;
if (dvb_usb_generic_rw(d, state->data, 3,
state->data, 0, 0) < 0)
err("i2c transfer failed.");
break;
case DW2102_RC_QUERY:
obuf[0] = 0x10;
if (dvb_usb_generic_rw(d, obuf, 1, ibuf, 2, 0) < 0)
state->data[0] = 0x10;
if (dvb_usb_generic_rw(d, state->data, 1,
state->data, 2, 0) < 0)
err("i2c transfer failed.");
msg[0].buf[1] = ibuf[0];
msg[0].buf[0] = ibuf[1];
msg[0].buf[1] = state->data[0];
msg[0].buf[0] = state->data[1];
break;
default:
/* always i2c write*/
obuf[0] = 0x08;
obuf[1] = msg[0].addr;
obuf[2] = msg[0].len;
state->data[0] = 0x08;
state->data[1] = msg[0].addr;
state->data[2] = msg[0].len;
memcpy(&obuf[3], msg[0].buf, msg[0].len);
memcpy(&state->data[3], msg[0].buf, msg[0].len);
if (dvb_usb_generic_rw(d, obuf, msg[0].len + 3,
ibuf, 1, 0) < 0)
if (dvb_usb_generic_rw(d, state->data, msg[0].len + 3,
state->data, 1, 0) < 0)
err("i2c transfer failed.");
}
break;
case 2:
/* always i2c read */
obuf[0] = 0x09;
obuf[1] = msg[0].len;
obuf[2] = msg[1].len;
obuf[3] = msg[0].addr;
memcpy(&obuf[4], msg[0].buf, msg[0].len);
if (dvb_usb_generic_rw(d, obuf, msg[0].len + 4,
ibuf, msg[1].len + 1, 0) < 0)
state->data[0] = 0x09;
state->data[1] = msg[0].len;
state->data[2] = msg[1].len;
state->data[3] = msg[0].addr;
memcpy(&state->data[4], msg[0].buf, msg[0].len);
if (dvb_usb_generic_rw(d, state->data, msg[0].len + 4,
state->data, msg[1].len + 1, 0) < 0)
err("i2c transfer failed.");
memcpy(msg[1].buf, &ibuf[1], msg[1].len);
memcpy(msg[1].buf, &state->data[1], msg[1].len);
break;
default:
warn("more than 2 i2c messages at a time is not handled yet.");
break;
}
mutex_unlock(&d->data_mutex);
mutex_unlock(&d->i2c_mutex);
return num;
}
......@@ -844,17 +855,23 @@ static int su3000_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
static int su3000_power_ctrl(struct dvb_usb_device *d, int i)
{
struct dw2102_state *state = (struct dw2102_state *)d->priv;
u8 obuf[] = {0xde, 0};
int ret = 0;
info("%s: %d, initialized %d", __func__, i, state->initialized);
if (i && !state->initialized) {
mutex_lock(&d->data_mutex);
state->data[0] = 0xde;
state->data[1] = 0;
state->initialized = 1;
/* reset board */
return dvb_usb_generic_rw(d, obuf, 2, NULL, 0, 0);
ret = dvb_usb_generic_rw(d, state->data, 2, NULL, 0, 0);
mutex_unlock(&d->data_mutex);
}
return 0;
return ret;
}
static int su3000_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
......@@ -1309,49 +1326,57 @@ static int prof_7500_frontend_attach(struct dvb_usb_adapter *d)
return 0;
}
static int su3000_frontend_attach(struct dvb_usb_adapter *d)
static int su3000_frontend_attach(struct dvb_usb_adapter *adap)
{
u8 obuf[3] = { 0xe, 0x80, 0 };
u8 ibuf[] = { 0 };
struct dvb_usb_device *d = adap->dev;
struct dw2102_state *state = d->priv;
mutex_lock(&d->data_mutex);
state->data[0] = 0xe;
state->data[1] = 0x80;
state->data[2] = 0;
if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
err("command 0x0e transfer failed.");
obuf[0] = 0xe;
obuf[1] = 0x02;
obuf[2] = 1;
state->data[0] = 0xe;
state->data[1] = 0x02;
state->data[2] = 1;
if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
err("command 0x0e transfer failed.");
msleep(300);
obuf[0] = 0xe;
obuf[1] = 0x83;
obuf[2] = 0;
state->data[0] = 0xe;
state->data[1] = 0x83;
state->data[2] = 0;
if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
err("command 0x0e transfer failed.");
obuf[0] = 0xe;
obuf[1] = 0x83;
obuf[2] = 1;
state->data[0] = 0xe;
state->data[1] = 0x83;
state->data[2] = 1;
if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
err("command 0x0e transfer failed.");
obuf[0] = 0x51;
state->data[0] = 0x51;
if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0)
if (dvb_usb_generic_rw(d, state->data, 1, state->data, 1, 0) < 0)
err("command 0x51 transfer failed.");
d->fe_adap[0].fe = dvb_attach(ds3000_attach, &su3000_ds3000_config,
&d->dev->i2c_adap);
if (d->fe_adap[0].fe == NULL)
mutex_unlock(&d->data_mutex);
adap->fe_adap[0].fe = dvb_attach(ds3000_attach, &su3000_ds3000_config,
&d->i2c_adap);
if (adap->fe_adap[0].fe == NULL)
return -EIO;
if (dvb_attach(ts2020_attach, d->fe_adap[0].fe,
if (dvb_attach(ts2020_attach, adap->fe_adap[0].fe,
&dw2104_ts2020_config,
&d->dev->i2c_adap)) {
&d->i2c_adap)) {
info("Attached DS3000/TS2020!");
return 0;
}
......@@ -1360,47 +1385,55 @@ static int su3000_frontend_attach(struct dvb_usb_adapter *d)
return -EIO;
}
static int t220_frontend_attach(struct dvb_usb_adapter *d)
static int t220_frontend_attach(struct dvb_usb_adapter *adap)
{
u8 obuf[3] = { 0xe, 0x87, 0 };
u8 ibuf[] = { 0 };
struct dvb_usb_device *d = adap->dev;
struct dw2102_state *state = d->priv;
mutex_lock(&d->data_mutex);
if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
state->data[0] = 0xe;
state->data[1] = 0x87;
state->data[2] = 0x0;
if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
err("command 0x0e transfer failed.");
obuf[0] = 0xe;
obuf[1] = 0x86;
obuf[2] = 1;
state->data[0] = 0xe;
state->data[1] = 0x86;
state->data[2] = 1;
if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
err("command 0x0e transfer failed.");
obuf[0] = 0xe;
obuf[1] = 0x80;
obuf[2] = 0;
state->data[0] = 0xe;
state->data[1] = 0x80;
state->data[2] = 0;
if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
err("command 0x0e transfer failed.");
msleep(50);
obuf[0] = 0xe;
obuf[1] = 0x80;
obuf[2] = 1;
state->data[0] = 0xe;
state->data[1] = 0x80;
state->data[2] = 1;
if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
err("command 0x0e transfer failed.");
obuf[0] = 0x51;
state->data[0] = 0x51;
if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0)
if (dvb_usb_generic_rw(d, state->data, 1, state->data, 1, 0) < 0)
err("command 0x51 transfer failed.");
d->fe_adap[0].fe = dvb_attach(cxd2820r_attach, &cxd2820r_config,
&d->dev->i2c_adap, NULL);
if (d->fe_adap[0].fe != NULL) {
if (dvb_attach(tda18271_attach, d->fe_adap[0].fe, 0x60,
&d->dev->i2c_adap, &tda18271_config)) {
mutex_unlock(&d->data_mutex);
adap->fe_adap[0].fe = dvb_attach(cxd2820r_attach, &cxd2820r_config,
&d->i2c_adap, NULL);
if (adap->fe_adap[0].fe != NULL) {
if (dvb_attach(tda18271_attach, adap->fe_adap[0].fe, 0x60,
&d->i2c_adap, &tda18271_config)) {
info("Attached TDA18271HD/CXD2820R!");
return 0;
}
......@@ -1410,23 +1443,30 @@ static int t220_frontend_attach(struct dvb_usb_adapter *d)
return -EIO;
}
static int m88rs2000_frontend_attach(struct dvb_usb_adapter *d)
static int m88rs2000_frontend_attach(struct dvb_usb_adapter *adap)
{
u8 obuf[] = { 0x51 };
u8 ibuf[] = { 0 };
struct dvb_usb_device *d = adap->dev;
struct dw2102_state *state = d->priv;
mutex_lock(&d->data_mutex);
if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0)
state->data[0] = 0x51;
if (dvb_usb_generic_rw(d, state->data, 1, state->data, 1, 0) < 0)
err("command 0x51 transfer failed.");
d->fe_adap[0].fe = dvb_attach(m88rs2000_attach, &s421_m88rs2000_config,
&d->dev->i2c_adap);
mutex_unlock(&d->data_mutex);
if (d->fe_adap[0].fe == NULL)
adap->fe_adap[0].fe = dvb_attach(m88rs2000_attach,
&s421_m88rs2000_config,
&d->i2c_adap);
if (adap->fe_adap[0].fe == NULL)
return -EIO;
if (dvb_attach(ts2020_attach, d->fe_adap[0].fe,
if (dvb_attach(ts2020_attach, adap->fe_adap[0].fe,
&dw2104_ts2020_config,
&d->dev->i2c_adap)) {
&d->i2c_adap)) {
info("Attached RS2000/TS2020!");
return 0;
}
......@@ -1439,44 +1479,50 @@ static int tt_s2_4600_frontend_attach(struct dvb_usb_adapter *adap)
{
struct dvb_usb_device *d = adap->dev;
struct dw2102_state *state = d->priv;
u8 obuf[3] = { 0xe, 0x80, 0 };
u8 ibuf[] = { 0 };
struct i2c_adapter *i2c_adapter;
struct i2c_client *client;
struct i2c_board_info board_info;
struct m88ds3103_platform_data m88ds3103_pdata = {};
struct ts2020_config ts2020_config = {};
if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 1, 0) < 0)
mutex_lock(&d->data_mutex);
state->data[0] = 0xe;
state->data[1] = 0x80;
state->data[2] = 0x0;
if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
err("command 0x0e transfer failed.");
obuf[0] = 0xe;
obuf[1] = 0x02;
obuf[2] = 1;
state->data[0] = 0xe;
state->data[1] = 0x02;
state->data[2] = 1;
if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 1, 0) < 0)
if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
err("command 0x0e transfer failed.");
msleep(300);
obuf[0] = 0xe;
obuf[1] = 0x83;
obuf[2] = 0;
state->data[0] = 0xe;
state->data[1] = 0x83;
state->data[2] = 0;
if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 1, 0) < 0)
if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
err("command 0x0e transfer failed.");
obuf[0] = 0xe;
obuf[1] = 0x83;
obuf[2] = 1;
state->data[0] = 0xe;
state->data[1] = 0x83;
state->data[2] = 1;
if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 1, 0) < 0)
if (dvb_usb_generic_rw(d, state->data, 3, state->data, 1, 0) < 0)
err("command 0x0e transfer failed.");
obuf[0] = 0x51;
state->data[0] = 0x51;
if (dvb_usb_generic_rw(d, obuf, 1, ibuf, 1, 0) < 0)
if (dvb_usb_generic_rw(d, state->data, 1, state->data, 1, 0) < 0)
err("command 0x51 transfer failed.");
mutex_unlock(&d->data_mutex);
/* attach demod */
m88ds3103_pdata.clk = 27000000;
m88ds3103_pdata.i2c_wr_max = 33;
......
......@@ -20,8 +20,17 @@ struct device;
int vsp1_du_init(struct device *dev);
int vsp1_du_setup_lif(struct device *dev, unsigned int width,
unsigned int height);
/**
* struct vsp1_du_lif_config - VSP LIF configuration
* @width: output frame width
* @height: output frame height
*/
struct vsp1_du_lif_config {
unsigned int width;
unsigned int height;
};
int vsp1_du_setup_lif(struct device *dev, const struct vsp1_du_lif_config *cfg);
struct vsp1_du_atomic_config {
u32 pixelformat;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment