[ARM] 3999/1: RX3715: suspend to RAM support

The RX3715 is similar to the H1940 in the way
that suspend to RAM works, so we can use most
of the extant support for the H1940 with only
a few modifictions
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-s3c2410/Kconfig

@@ -41,9 +41,16 @@ config BAST_PC104_IRQ
 	  Say Y	here to enable the PC104 IRQ routing on the
 	  Simtec BAST (EB2410ITX)
 
+config PM_H1940
+	bool
+	depends on PM
+	help
+	  Internal node for H1940 and related PM
+
 config ARCH_H1940
 	bool "IPAQ H1940"
 	select CPU_S3C2410
+	select PM_H1940
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 
@@ -115,6 +122,7 @@ config MACH_VR1000
 config MACH_RX3715
 	bool "HP iPAQ rx3715"
 	select CPU_S3C2440
+	select PM_H1940
 	help
 	  Say Y here if you are using the HP iPAQ rx3715.
 

arch/arm/mach-s3c2410/Makefile

@@ -31,6 +31,7 @@ obj-$(CONFIG_CPU_S3C2410_DMA)	+= s3c2410-dma.o
 
 obj-$(CONFIG_PM)		+= pm.o sleep.o
 obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
+obj-$(CONFIG_PM_H1940)		+= pm-h1940.o
 
 # S3C2412 support
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
@@ -77,7 +78,7 @@ obj-$(CONFIG_MACH_AML_M5900)	+= mach-amlm5900.o
 obj-$(CONFIG_MACH_ANUBIS)	+= mach-anubis.o
 obj-$(CONFIG_MACH_OSIRIS)	+= mach-osiris.o
 obj-$(CONFIG_ARCH_BAST)		+= mach-bast.o usb-simtec.o
-obj-$(CONFIG_ARCH_H1940)	+= mach-h1940.o pm-h1940.o
+obj-$(CONFIG_ARCH_H1940)	+= mach-h1940.o
 obj-$(CONFIG_MACH_N30)		+= mach-n30.o
 obj-$(CONFIG_ARCH_SMDK2410)	+= mach-smdk2410.o
 obj-$(CONFIG_MACH_SMDK2413)	+= mach-smdk2413.o

arch/arm/mach-s3c2410/mach-rx3715.c

@@ -42,6 +42,7 @@
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/regs-lcd.h>
 
+#include <asm/arch/h1940.h>
 #include <asm/arch/nand.h>
 #include <asm/arch/fb.h>
 
@@ -224,7 +225,9 @@ static void __init rx3715_init_irq(void)
 
 static void __init rx3715_init_machine(void)
 {
+	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
 	s3c2410_pm_init();
+
 	s3c24xx_fb_set_platdata(&rx3715_lcdcfg);
 }
 

arch/arm/mach-s3c2410/s3c2410-pm.c

@@ -66,6 +66,22 @@ static void s3c2410_pm_prepare(void)
 		__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
 	}
 
+	/* the RX3715 uses similar code and the same H1940 and the
+	 * same offsets for resume and checksum pointers */
+
+	if (machine_is_rx3715()) {
+		void *base = phys_to_virt(H1940_SUSPEND_CHECK);
+		unsigned long ptr;
+		unsigned long calc = 0;
+
+		/* generate check for the bootloader to check on resume */
+
+		for (ptr = 0; ptr < 0x40000; ptr += 0x4)
+			calc += __raw_readl(base+ptr);
+
+		__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
+	}
+
 	if ( machine_is_aml_m5900() )
 		s3c2410_gpio_setpin(S3C2410_GPF2, 1);
 

arch/arm/mm/mmu.c

@@ -619,7 +619,9 @@ void __init reserve_node_zero(pg_data_t *pgdat)
 	if (machine_is_p720t())
 		res_size = 0x00014000;
 
-	if (machine_is_h1940()) {
+	/* H1940 and RX3715 need to reserve this for suspend */
+
+	if (machine_is_h1940() || machine_is_rx3715()) {
 		reserve_bootmem_node(pgdat, 0x30003000, 0x1000);
 		reserve_bootmem_node(pgdat, 0x30081000, 0x1000);
 	}