Merge branch 'perf' into devel

Conflicts:
	arch/arm/Kconfig

arch/arm/Kconfig

@@ -20,6 +20,8 @@ config ARM
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZO
+	select HAVE_PERF_EVENTS
+	select PERF_USE_VMALLOC
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -877,6 +879,11 @@ config XSCALE_PMU
 	depends on CPU_XSCALE && !XSCALE_PMU_TIMER
 	default y
 
+config CPU_HAS_PMU
+	depends on CPU_V6 || CPU_V7 || XSCALE_PMU
+	default y
+	bool
+
 if !MMU
 source "arch/arm/Kconfig-nommu"
 endif
@@ -1181,6 +1188,14 @@ config HIGHPTE
 	depends on HIGHMEM
 	depends on !OUTER_CACHE
 
+config HW_PERF_EVENTS
+	bool "Enable hardware performance counter support for perf events"
+	depends on PERF_EVENTS && CPU_HAS_PMU && (CPU_V6 || CPU_V7)
+	default y
+	help
+	  Enable hardware performance counter support for perf events. If
+	  disabled, perf events will use software events only.
+
 source "mm/Kconfig"
 
 config LEDS

arch/arm/include/asm/perf_event.h

+/*
+ *  linux/arch/arm/include/asm/perf_event.h
+ *
+ *  Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ARM_PERF_EVENT_H__
+#define __ARM_PERF_EVENT_H__
+
+/*
+ * NOP: on *most* (read: all supported) ARM platforms, the performance
+ * counter interrupts are regular interrupts and not an NMI. This
+ * means that when we receive the interrupt we can call
+ * perf_event_do_pending() that handles all of the work with
+ * interrupts enabled.
+ */
+static inline void
+set_perf_event_pending(void)
+{
+}
+
+/* ARM performance counters start from 1 (in the cp15 accesses) so use the
+ * same indexes here for consistency. */
+#define PERF_EVENT_INDEX_OFFSET 1
+
+#endif /* __ARM_PERF_EVENT_H__ */

arch/arm/include/asm/pmu.h

+/*
+ *  linux/arch/arm/include/asm/pmu.h
+ *
+ *  Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ARM_PMU_H__
+#define __ARM_PMU_H__
+
+#ifdef CONFIG_CPU_HAS_PMU
+
+struct pmu_irqs {
+	const int   *irqs;
+	int	    num_irqs;
+};
+
+/**
+ * reserve_pmu() - reserve the hardware performance counters
+ *
+ * Reserve the hardware performance counters in the system for exclusive use.
+ * The 'struct pmu_irqs' for the system is returned on success, ERR_PTR()
+ * encoded error on failure.
+ */
+extern const struct pmu_irqs *
+reserve_pmu(void);
+
+/**
+ * release_pmu() - Relinquish control of the performance counters
+ *
+ * Release the performance counters and allow someone else to use them.
+ * Callers must have disabled the counters and released IRQs before calling
+ * this. The 'struct pmu_irqs' returned from reserve_pmu() must be passed as
+ * a cookie.
+ */
+extern int
+release_pmu(const struct pmu_irqs *irqs);
+
+/**
+ * init_pmu() - Initialise the PMU.
+ *
+ * Initialise the system ready for PMU enabling. This should typically set the
+ * IRQ affinity and nothing else. The users (oprofile/perf events etc) will do
+ * the actual hardware initialisation.
+ */
+extern int
+init_pmu(void);
+
+#else /* CONFIG_CPU_HAS_PMU */
+
+static inline const struct pmu_irqs *
+reserve_pmu(void)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static inline int
+release_pmu(const struct pmu_irqs *irqs)
+{
+	return -ENODEV;
+}
+
+static inline int
+init_pmu(void)
+{
+	return -ENODEV;
+}
+
+#endif /* CONFIG_CPU_HAS_PMU */
+
+#endif /* __ARM_PMU_H__ */

arch/arm/kernel/Makefile

@@ -46,6 +46,8 @@ obj-$(CONFIG_CPU_XSCALE)	+= xscale-cp0.o
 obj-$(CONFIG_CPU_XSC3)		+= xscale-cp0.o
 obj-$(CONFIG_CPU_MOHAWK)	+= xscale-cp0.o
 obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
+obj-$(CONFIG_CPU_HAS_PMU)	+= pmu.o
+obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o
 AFLAGS_iwmmxt.o			:= -Wa,-mcpu=iwmmxt
 
 ifneq ($(CONFIG_ARCH_EBSA110),y)

arch/arm/kernel/perf_event.c

+#undef DEBUG
+
+/*
+ * ARM performance counter support.
+ *
+ * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
+ *
+ * ARMv7 support: Jean Pihet <jpihet@mvista.com>
+ * 2010 (c) MontaVista Software, LLC.
+ *
+ * This code is based on the sparc64 perf event code, which is in turn based
+ * on the x86 code. Callchain code is based on the ARM OProfile backtrace
+ * code.
+ */
+#define pr_fmt(fmt) "hw perfevents: " fmt
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/perf_event.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+
+#include <asm/cputype.h>
+#include <asm/irq.h>
+#include <asm/irq_regs.h>
+#include <asm/pmu.h>
+#include <asm/stacktrace.h>
+
+static const struct pmu_irqs *pmu_irqs;
+
+/*
+ * Hardware lock to serialize accesses to PMU registers. Needed for the
+ * read/modify/write sequences.
+ */
+DEFINE_SPINLOCK(pmu_lock);
+
+/*
+ * ARMv6 supports a maximum of 3 events, starting from index 1. If we add
+ * another platform that supports more, we need to increase this to be the
+ * largest of all platforms.
+ *
+ * ARMv7 supports up to 32 events:
+ *  cycle counter CCNT + 31 events counters CNT0..30.
+ *  Cortex-A8 has 1+4 counters, Cortex-A9 has 1+6 counters.
+ */
+#define ARMPMU_MAX_HWEVENTS		33
+
+/* The events for a given CPU. */
+struct cpu_hw_events {
+	/*
+	 * The events that are active on the CPU for the given index. Index 0
+	 * is reserved.
+	 */
+	struct perf_event	*events[ARMPMU_MAX_HWEVENTS];
+
+	/*
+	 * A 1 bit for an index indicates that the counter is being used for
+	 * an event. A 0 means that the counter can be used.
+	 */
+	unsigned long		used_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)];
+
+	/*
+	 * A 1 bit for an index indicates that the counter is actively being
+	 * used.
+	 */
+	unsigned long		active_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)];
+};
+DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
+
+struct arm_pmu {
+	char		*name;
+	irqreturn_t	(*handle_irq)(int irq_num, void *dev);
+	void		(*enable)(struct hw_perf_event *evt, int idx);
+	void		(*disable)(struct hw_perf_event *evt, int idx);
+	int		(*event_map)(int evt);
+	u64		(*raw_event)(u64);
+	int		(*get_event_idx)(struct cpu_hw_events *cpuc,
+					 struct hw_perf_event *hwc);
+	u32		(*read_counter)(int idx);
+	void		(*write_counter)(int idx, u32 val);
+	void		(*start)(void);
+	void		(*stop)(void);
+	int		num_events;
+	u64		max_period;
+};
+
+/* Set at runtime when we know what CPU type we are. */
+static const struct arm_pmu *armpmu;
+
+#define HW_OP_UNSUPPORTED		0xFFFF
+
+#define C(_x) \
+	PERF_COUNT_HW_CACHE_##_x
+
+#define CACHE_OP_UNSUPPORTED		0xFFFF
+
+static unsigned armpmu_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+				     [PERF_COUNT_HW_CACHE_OP_MAX]
+				     [PERF_COUNT_HW_CACHE_RESULT_MAX];
+
+static int
+armpmu_map_cache_event(u64 config)
+{
+	unsigned int cache_type, cache_op, cache_result, ret;
+
+	cache_type = (config >>  0) & 0xff;
+	if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
+		return -EINVAL;
+
+	cache_op = (config >>  8) & 0xff;
+	if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
+		return -EINVAL;
+
+	cache_result = (config >> 16) & 0xff;
+	if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+		return -EINVAL;
+
+	ret = (int)armpmu_perf_cache_map[cache_type][cache_op][cache_result];
+
+	if (ret == CACHE_OP_UNSUPPORTED)
+		return -ENOENT;
+
+	return ret;
+}
+
+static int
+armpmu_event_set_period(struct perf_event *event,
+			struct hw_perf_event *hwc,
+			int idx)
+{
+	s64 left = atomic64_read(&hwc->period_left);
+	s64 period = hwc->sample_period;
+	int ret = 0;
+
+	if (unlikely(left <= -period)) {
+		left = period;
+		atomic64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+
+	if (unlikely(left <= 0)) {
+		left += period;
+		atomic64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+
+	if (left > (s64)armpmu->max_period)
+		left = armpmu->max_period;
+
+	atomic64_set(&hwc->prev_count, (u64)-left);
+
+	armpmu->write_counter(idx, (u64)(-left) & 0xffffffff);
+
+	perf_event_update_userpage(event);
+
+	return ret;
+}
+
+static u64
+armpmu_event_update(struct perf_event *event,
+		    struct hw_perf_event *hwc,
+		    int idx)
+{
+	int shift = 64 - 32;
+	s64 prev_raw_count, new_raw_count;
+	s64 delta;
+
+again:
+	prev_raw_count = atomic64_read(&hwc->prev_count);
+	new_raw_count = armpmu->read_counter(idx);
+
+	if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
+			     new_raw_count) != prev_raw_count)
+		goto again;
+
+	delta = (new_raw_count << shift) - (prev_raw_count << shift);
+	delta >>= shift;
+
+	atomic64_add(delta, &event->count);
+	atomic64_sub(delta, &hwc->period_left);
+
+	return new_raw_count;
+}
+
+static void
+armpmu_disable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+
+	WARN_ON(idx < 0);
+
+	clear_bit(idx, cpuc->active_mask);
+	armpmu->disable(hwc, idx);
+
+	barrier();
+
+	armpmu_event_update(event, hwc, idx);
+	cpuc->events[idx] = NULL;
+	clear_bit(idx, cpuc->used_mask);
+
+	perf_event_update_userpage(event);
+}
+
+static void
+armpmu_read(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+
+	/* Don't read disabled counters! */
+	if (hwc->idx < 0)
+		return;
+
+	armpmu_event_update(event, hwc, hwc->idx);
+}
+
+static void
+armpmu_unthrottle(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+
+	/*
+	 * Set the period again. Some counters can't be stopped, so when we
+	 * were throttled we simply disabled the IRQ source and the counter
+	 * may have been left counting. If we don't do this step then we may
+	 * get an interrupt too soon or *way* too late if the overflow has
+	 * happened since disabling.
+	 */
+	armpmu_event_set_period(event, hwc, hwc->idx);
+	armpmu->enable(hwc, hwc->idx);
+}
+
+static int
+armpmu_enable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx;
+	int err = 0;
+
+	/* If we don't have a space for the counter then finish early. */
+	idx = armpmu->get_event_idx(cpuc, hwc);
+	if (idx < 0) {
+		err = idx;
+		goto out;
+	}
+
+	/*
+	 * If there is an event in the counter we are going to use then make
+	 * sure it is disabled.
+	 */
+	event->hw.idx = idx;
+	armpmu->disable(hwc, idx);
+	cpuc->events[idx] = event;
+	set_bit(idx, cpuc->active_mask);
+
+	/* Set the period for the event. */
+	armpmu_event_set_period(event, hwc, idx);
+
+	/* Enable the event. */
+	armpmu->enable(hwc, idx);
+
+	/* Propagate our changes to the userspace mapping. */
+	perf_event_update_userpage(event);
+
+out:
+	return err;
+}
+
+static struct pmu pmu = {
+	.enable	    = armpmu_enable,
+	.disable    = armpmu_disable,
+	.unthrottle = armpmu_unthrottle,
+	.read	    = armpmu_read,
+};
+
+static int
+validate_event(struct cpu_hw_events *cpuc,
+	       struct perf_event *event)
+{
+	struct hw_perf_event fake_event = event->hw;
+
+	if (event->pmu && event->pmu != &pmu)
+		return 0;
+
+	return armpmu->get_event_idx(cpuc, &fake_event) >= 0;
+}
+
+static int
+validate_group(struct perf_event *event)
+{
+	struct perf_event *sibling, *leader = event->group_leader;
+	struct cpu_hw_events fake_pmu;
+
+	memset(&fake_pmu, 0, sizeof(fake_pmu));
+
+	if (!validate_event(&fake_pmu, leader))
+		return -ENOSPC;
+
+	list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
+		if (!validate_event(&fake_pmu, sibling))
+			return -ENOSPC;
+	}
+
+	if (!validate_event(&fake_pmu, event))
+		return -ENOSPC;
+
+	return 0;
+}
+
+static int
+armpmu_reserve_hardware(void)
+{
+	int i;
+	int err;
+
+	pmu_irqs = reserve_pmu();
+	if (IS_ERR(pmu_irqs)) {
+		pr_warning("unable to reserve pmu\n");
+		return PTR_ERR(pmu_irqs);
+	}
+
+	init_pmu();
+
+	if (pmu_irqs->num_irqs < 1) {
+		pr_err("no irqs for PMUs defined\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < pmu_irqs->num_irqs; ++i) {
+		err = request_irq(pmu_irqs->irqs[i], armpmu->handle_irq,
+				  IRQF_DISABLED, "armpmu", NULL);
+		if (err) {
+			pr_warning("unable to request IRQ%d for ARM "
+				   "perf counters\n", pmu_irqs->irqs[i]);
+			break;
+		}
+	}
+
+	if (err) {
+		for (i = i - 1; i >= 0; --i)
+			free_irq(pmu_irqs->irqs[i], NULL);
+		release_pmu(pmu_irqs);
+		pmu_irqs = NULL;
+	}
+
+	return err;
+}
+
+static void
+armpmu_release_hardware(void)
+{
+	int i;
+
+	for (i = pmu_irqs->num_irqs - 1; i >= 0; --i)
+		free_irq(pmu_irqs->irqs[i], NULL);
+	armpmu->stop();
+
+	release_pmu(pmu_irqs);
+	pmu_irqs = NULL;
+}
+
+static atomic_t active_events = ATOMIC_INIT(0);
+static DEFINE_MUTEX(pmu_reserve_mutex);
+
+static void
+hw_perf_event_destroy(struct perf_event *event)
+{
+	if (atomic_dec_and_mutex_lock(&active_events, &pmu_reserve_mutex)) {
+		armpmu_release_hardware();
+		mutex_unlock(&pmu_reserve_mutex);
+	}
+}
+
+static int
+__hw_perf_event_init(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	int mapping, err;
+
+	/* Decode the generic type into an ARM event identifier. */
+	if (PERF_TYPE_HARDWARE == event->attr.type) {
+		mapping = armpmu->event_map(event->attr.config);
+	} else if (PERF_TYPE_HW_CACHE == event->attr.type) {
+		mapping = armpmu_map_cache_event(event->attr.config);
+	} else if (PERF_TYPE_RAW == event->attr.type) {
+		mapping = armpmu->raw_event(event->attr.config);
+	} else {
+		pr_debug("event type %x not supported\n", event->attr.type);
+		return -EOPNOTSUPP;
+	}
+
+	if (mapping < 0) {
+		pr_debug("event %x:%llx not supported\n", event->attr.type,
+			 event->attr.config);
+		return mapping;
+	}
+
+	/*
+	 * Check whether we need to exclude the counter from certain modes.
+	 * The ARM performance counters are on all of the time so if someone
+	 * has asked us for some excludes then we have to fail.
+	 */
+	if (event->attr.exclude_kernel || event->attr.exclude_user ||
+	    event->attr.exclude_hv || event->attr.exclude_idle) {
+		pr_debug("ARM performance counters do not support "
+			 "mode exclusion\n");
+		return -EPERM;
+	}
+
+	/*
+	 * We don't assign an index until we actually place the event onto
+	 * hardware. Use -1 to signify that we haven't decided where to put it
+	 * yet. For SMP systems, each core has it's own PMU so we can't do any
+	 * clever allocation or constraints checking at this point.
+	 */
+	hwc->idx = -1;
+
+	/*
+	 * Store the event encoding into the config_base field. config and
+	 * event_base are unused as the only 2 things we need to know are
+	 * the event mapping and the counter to use. The counter to use is
+	 * also the indx and the config_base is the event type.
+	 */
+	hwc->config_base	    = (unsigned long)mapping;
+	hwc->config		    = 0;
+	hwc->event_base		    = 0;
+
+	if (!hwc->sample_period) {
+		hwc->sample_period  = armpmu->max_period;
+		hwc->last_period    = hwc->sample_period;
+		atomic64_set(&hwc->period_left, hwc->sample_period);
+	}
+
+	err = 0;
+	if (event->group_leader != event) {
+		err = validate_group(event);
+		if (err)
+			return -EINVAL;
+	}
+
+	return err;
+}
+
+const struct pmu *
+hw_perf_event_init(struct perf_event *event)
+{
+	int err = 0;
+
+	if (!armpmu)
+		return ERR_PTR(-ENODEV);
+
+	event->destroy = hw_perf_event_destroy;
+
+	if (!atomic_inc_not_zero(&active_events)) {
+		if (atomic_read(&active_events) > perf_max_events) {
+			atomic_dec(&active_events);
+			return ERR_PTR(-ENOSPC);
+		}
+
+		mutex_lock(&pmu_reserve_mutex);
+		if (atomic_read(&active_events) == 0) {
+			err = armpmu_reserve_hardware();
+		}
+
+		if (!err)
+			atomic_inc(&active_events);
+		mutex_unlock(&pmu_reserve_mutex);
+	}
+
+	if (err)
+		return ERR_PTR(err);
+
+	err = __hw_perf_event_init(event);
+	if (err)
+		hw_perf_event_destroy(event);
+
+	return err ? ERR_PTR(err) : &pmu;
+}
+
+void
+hw_perf_enable(void)
+{
+	/* Enable all of the perf events on hardware. */
+	int idx;
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	if (!armpmu)
+		return;
+
+	for (idx = 0; idx <= armpmu->num_events; ++idx) {
+		struct perf_event *event = cpuc->events[idx];
+
+		if (!event)
+			continue;
+
+		armpmu->enable(&event->hw, idx);
+	}
+
+	armpmu->start();
+}
+
+void
+hw_perf_disable(void)
+{
+	if (armpmu)
+		armpmu->stop();
+}
+
+/*
+ * ARMv6 Performance counter handling code.
+ *
+ * ARMv6 has 2 configurable performance counters and a single cycle counter.
+ * They all share a single reset bit but can be written to zero so we can use
+ * that for a reset.
+ *
+ * The counters can't be individually enabled or disabled so when we remove
+ * one event and replace it with another we could get spurious counts from the
+ * wrong event. However, we can take advantage of the fact that the
+ * performance counters can export events to the event bus, and the event bus
+ * itself can be monitored. This requires that we *don't* export the events to
+ * the event bus. The procedure for disabling a configurable counter is:
+ *	- change the counter to count the ETMEXTOUT[0] signal (0x20). This
+ *	  effectively stops the counter from counting.
+ *	- disable the counter's interrupt generation (each counter has it's
+ *	  own interrupt enable bit).
+ * Once stopped, the counter value can be written as 0 to reset.
+ *
+ * To enable a counter:
+ *	- enable the counter's interrupt generation.
+ *	- set the new event type.
+ *
+ * Note: the dedicated cycle counter only counts cycles and can't be
+ * enabled/disabled independently of the others. When we want to disable the
+ * cycle counter, we have to just disable the interrupt reporting and start
+ * ignoring that counter. When re-enabling, we have to reset the value and
+ * enable the interrupt.
+ */
+
+enum armv6_perf_types {
+	ARMV6_PERFCTR_ICACHE_MISS	    = 0x0,
+	ARMV6_PERFCTR_IBUF_STALL	    = 0x1,
+	ARMV6_PERFCTR_DDEP_STALL	    = 0x2,
+	ARMV6_PERFCTR_ITLB_MISS		    = 0x3,
+	ARMV6_PERFCTR_DTLB_MISS		    = 0x4,
+	ARMV6_PERFCTR_BR_EXEC		    = 0x5,
+	ARMV6_PERFCTR_BR_MISPREDICT	    = 0x6,
+	ARMV6_PERFCTR_INSTR_EXEC	    = 0x7,
+	ARMV6_PERFCTR_DCACHE_HIT	    = 0x9,
+	ARMV6_PERFCTR_DCACHE_ACCESS	    = 0xA,
+	ARMV6_PERFCTR_DCACHE_MISS	    = 0xB,
+	ARMV6_PERFCTR_DCACHE_WBACK	    = 0xC,
+	ARMV6_PERFCTR_SW_PC_CHANGE	    = 0xD,
+	ARMV6_PERFCTR_MAIN_TLB_MISS	    = 0xF,
+	ARMV6_PERFCTR_EXPL_D_ACCESS	    = 0x10,
+	ARMV6_PERFCTR_LSU_FULL_STALL	    = 0x11,
+	ARMV6_PERFCTR_WBUF_DRAINED	    = 0x12,
+	ARMV6_PERFCTR_CPU_CYCLES	    = 0xFF,
+	ARMV6_PERFCTR_NOP		    = 0x20,
+};
+
+enum armv6_counters {
+	ARMV6_CYCLE_COUNTER = 1,
+	ARMV6_COUNTER0,
+	ARMV6_COUNTER1,
+};
+
+/*
+ * The hardware events that we support. We do support cache operations but
+ * we have harvard caches and no way to combine instruction and data
+ * accesses/misses in hardware.
+ */
+static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV6_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV6_PERFCTR_INSTR_EXEC,
+	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
+	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV6_PERFCTR_BR_MISPREDICT,
+	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
+};
+
+static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+					  [PERF_COUNT_HW_CACHE_OP_MAX]
+					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+	[C(L1D)] = {
+		/*
+		 * The performance counters don't differentiate between read
+		 * and write accesses/misses so this isn't strictly correct,
+		 * but it's the best we can do. Writes and reads get
+		 * combined.
+		 */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV6_PERFCTR_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DCACHE_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV6_PERFCTR_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DCACHE_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ICACHE_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ICACHE_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		/*
+		 * The ARM performance counters can count micro DTLB misses,
+		 * micro ITLB misses and main TLB misses. There isn't an event
+		 * for TLB misses, so use the micro misses here and if users
+		 * want the main TLB misses they can use a raw counter.
+		 */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DTLB_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DTLB_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
+enum armv6mpcore_perf_types {
+	ARMV6MPCORE_PERFCTR_ICACHE_MISS	    = 0x0,
+	ARMV6MPCORE_PERFCTR_IBUF_STALL	    = 0x1,
+	ARMV6MPCORE_PERFCTR_DDEP_STALL	    = 0x2,
+	ARMV6MPCORE_PERFCTR_ITLB_MISS	    = 0x3,
+	ARMV6MPCORE_PERFCTR_DTLB_MISS	    = 0x4,
+	ARMV6MPCORE_PERFCTR_BR_EXEC	    = 0x5,
+	ARMV6MPCORE_PERFCTR_BR_NOTPREDICT   = 0x6,
+	ARMV6MPCORE_PERFCTR_BR_MISPREDICT   = 0x7,
+	ARMV6MPCORE_PERFCTR_INSTR_EXEC	    = 0x8,
+	ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA,
+	ARMV6MPCORE_PERFCTR_DCACHE_RDMISS   = 0xB,
+	ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC,
+	ARMV6MPCORE_PERFCTR_DCACHE_WRMISS   = 0xD,
+	ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE,
+	ARMV6MPCORE_PERFCTR_SW_PC_CHANGE    = 0xF,
+	ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS   = 0x10,
+	ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11,
+	ARMV6MPCORE_PERFCTR_LSU_FULL_STALL  = 0x12,
+	ARMV6MPCORE_PERFCTR_WBUF_DRAINED    = 0x13,
+	ARMV6MPCORE_PERFCTR_CPU_CYCLES	    = 0xFF,
+};
+
+/*
+ * The hardware events that we support. We do support cache operations but
+ * we have harvard caches and no way to combine instruction and data
+ * accesses/misses in hardware.
+ */
+static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
+	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
+	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
+	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
+};
+
+static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+					[PERF_COUNT_HW_CACHE_OP_MAX]
+					[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+	[C(L1D)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]  =
+				ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS,
+			[C(RESULT_MISS)]    =
+				ARMV6MPCORE_PERFCTR_DCACHE_RDMISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]  =
+				ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS,
+			[C(RESULT_MISS)]    =
+				ARMV6MPCORE_PERFCTR_DCACHE_WRMISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		/*
+		 * The ARM performance counters can count micro DTLB misses,
+		 * micro ITLB misses and main TLB misses. There isn't an event
+		 * for TLB misses, so use the micro misses here and if users
+		 * want the main TLB misses they can use a raw counter.
+		 */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_DTLB_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_DTLB_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
+static inline unsigned long
+armv6_pmcr_read(void)
+{
+	u32 val;
+	asm volatile("mrc   p15, 0, %0, c15, c12, 0" : "=r"(val));
+	return val;
+}
+
+static inline void
+armv6_pmcr_write(unsigned long val)
+{
+	asm volatile("mcr   p15, 0, %0, c15, c12, 0" : : "r"(val));
+}
+
+#define ARMV6_PMCR_ENABLE		(1 << 0)
+#define ARMV6_PMCR_CTR01_RESET		(1 << 1)
+#define ARMV6_PMCR_CCOUNT_RESET		(1 << 2)
+#define ARMV6_PMCR_CCOUNT_DIV		(1 << 3)
+#define ARMV6_PMCR_COUNT0_IEN		(1 << 4)
+#define ARMV6_PMCR_COUNT1_IEN		(1 << 5)
+#define ARMV6_PMCR_CCOUNT_IEN		(1 << 6)
+#define ARMV6_PMCR_COUNT0_OVERFLOW	(1 << 8)
+#define ARMV6_PMCR_COUNT1_OVERFLOW	(1 << 9)
+#define ARMV6_PMCR_CCOUNT_OVERFLOW	(1 << 10)
+#define ARMV6_PMCR_EVT_COUNT0_SHIFT	20
+#define ARMV6_PMCR_EVT_COUNT0_MASK	(0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT)
+#define ARMV6_PMCR_EVT_COUNT1_SHIFT	12
+#define ARMV6_PMCR_EVT_COUNT1_MASK	(0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT)
+
+#define ARMV6_PMCR_OVERFLOWED_MASK \
+	(ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \
+	 ARMV6_PMCR_CCOUNT_OVERFLOW)
+
+static inline int
+armv6_pmcr_has_overflowed(unsigned long pmcr)
+{
+	return (pmcr & ARMV6_PMCR_OVERFLOWED_MASK);
+}
+
+static inline int
+armv6_pmcr_counter_has_overflowed(unsigned long pmcr,
+				  enum armv6_counters counter)
+{
+	int ret = 0;
+
+	if (ARMV6_CYCLE_COUNTER == counter)
+		ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW;
+	else if (ARMV6_COUNTER0 == counter)
+		ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW;
+	else if (ARMV6_COUNTER1 == counter)
+		ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW;
+	else
+		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+
+	return ret;
+}
+
+static inline u32
+armv6pmu_read_counter(int counter)
+{
+	unsigned long value = 0;
+
+	if (ARMV6_CYCLE_COUNTER == counter)
+		asm volatile("mrc   p15, 0, %0, c15, c12, 1" : "=r"(value));
+	else if (ARMV6_COUNTER0 == counter)
+		asm volatile("mrc   p15, 0, %0, c15, c12, 2" : "=r"(value));
+	else if (ARMV6_COUNTER1 == counter)
+		asm volatile("mrc   p15, 0, %0, c15, c12, 3" : "=r"(value));
+	else
+		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+
+	return value;
+}
+
+static inline void
+armv6pmu_write_counter(int counter,
+		       u32 value)
+{
+	if (ARMV6_CYCLE_COUNTER == counter)
+		asm volatile("mcr   p15, 0, %0, c15, c12, 1" : : "r"(value));
+	else if (ARMV6_COUNTER0 == counter)
+		asm volatile("mcr   p15, 0, %0, c15, c12, 2" : : "r"(value));
+	else if (ARMV6_COUNTER1 == counter)
+		asm volatile("mcr   p15, 0, %0, c15, c12, 3" : : "r"(value));
+	else
+		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+}
+
+void
+armv6pmu_enable_event(struct hw_perf_event *hwc,
+		      int idx)
+{
+	unsigned long val, mask, evt, flags;
+
+	if (ARMV6_CYCLE_COUNTER == idx) {
+		mask	= 0;
+		evt	= ARMV6_PMCR_CCOUNT_IEN;
+	} else if (ARMV6_COUNTER0 == idx) {
+		mask	= ARMV6_PMCR_EVT_COUNT0_MASK;
+		evt	= (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) |
+			  ARMV6_PMCR_COUNT0_IEN;
+	} else if (ARMV6_COUNTER1 == idx) {
+		mask	= ARMV6_PMCR_EVT_COUNT1_MASK;
+		evt	= (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) |
+			  ARMV6_PMCR_COUNT1_IEN;
+	} else {
+		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+		return;
+	}
+
+	/*
+	 * Mask out the current event and set the counter to count the event
+	 * that we're interested in.
+	 */
+	spin_lock_irqsave(&pmu_lock, flags);
+	val = armv6_pmcr_read();
+	val &= ~mask;
+	val |= evt;
+	armv6_pmcr_write(val);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static irqreturn_t
+armv6pmu_handle_irq(int irq_num,
+		    void *dev)
+{
+	unsigned long pmcr = armv6_pmcr_read();
+	struct perf_sample_data data;
+	struct cpu_hw_events *cpuc;
+	struct pt_regs *regs;
+	int idx;
+
+	if (!armv6_pmcr_has_overflowed(pmcr))
+		return IRQ_NONE;
+
+	regs = get_irq_regs();
+
+	/*
+	 * The interrupts are cleared by writing the overflow flags back to
+	 * the control register. All of the other bits don't have any effect
+	 * if they are rewritten, so write the whole value back.
+	 */
+	armv6_pmcr_write(pmcr);
+
+	data.addr = 0;
+
+	cpuc = &__get_cpu_var(cpu_hw_events);
+	for (idx = 0; idx <= armpmu->num_events; ++idx) {
+		struct perf_event *event = cpuc->events[idx];
+		struct hw_perf_event *hwc;
+
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+
+		/*
+		 * We have a single interrupt for all counters. Check that
+		 * each counter has overflowed before we process it.
+		 */
+		if (!armv6_pmcr_counter_has_overflowed(pmcr, idx))
+			continue;
+
+		hwc = &event->hw;
+		armpmu_event_update(event, hwc, idx);
+		data.period = event->hw.last_period;
+		if (!armpmu_event_set_period(event, hwc, idx))
+			continue;
+
+		if (perf_event_overflow(event, 0, &data, regs))
+			armpmu->disable(hwc, idx);
+	}
+
+	/*
+	 * Handle the pending perf events.
+	 *
+	 * Note: this call *must* be run with interrupts enabled. For
+	 * platforms that can have the PMU interrupts raised as a PMI, this
+	 * will not work.
+	 */
+	perf_event_do_pending();
+
+	return IRQ_HANDLED;
+}
+
+static void
+armv6pmu_start(void)
+{
+	unsigned long flags, val;
+
+	spin_lock_irqsave(&pmu_lock, flags);
+	val = armv6_pmcr_read();
+	val |= ARMV6_PMCR_ENABLE;
+	armv6_pmcr_write(val);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+void
+armv6pmu_stop(void)
+{
+	unsigned long flags, val;
+
+	spin_lock_irqsave(&pmu_lock, flags);
+	val = armv6_pmcr_read();
+	val &= ~ARMV6_PMCR_ENABLE;
+	armv6_pmcr_write(val);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static inline int
+armv6pmu_event_map(int config)
+{
+	int mapping = armv6_perf_map[config];
+	if (HW_OP_UNSUPPORTED == mapping)
+		mapping = -EOPNOTSUPP;
+	return mapping;
+}
+
+static inline int
+armv6mpcore_pmu_event_map(int config)
+{
+	int mapping = armv6mpcore_perf_map[config];
+	if (HW_OP_UNSUPPORTED == mapping)
+		mapping = -EOPNOTSUPP;
+	return mapping;
+}
+
+static u64
+armv6pmu_raw_event(u64 config)
+{
+	return config & 0xff;
+}
+
+static int
+armv6pmu_get_event_idx(struct cpu_hw_events *cpuc,
+		       struct hw_perf_event *event)
+{
+	/* Always place a cycle counter into the cycle counter. */
+	if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) {
+		if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask))
+			return -EAGAIN;
+
+		return ARMV6_CYCLE_COUNTER;
+	} else {
+		/*
+		 * For anything other than a cycle counter, try and use
+		 * counter0 and counter1.
+		 */
+		if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask)) {
+			return ARMV6_COUNTER1;
+		}
+
+		if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask)) {
+			return ARMV6_COUNTER0;
+		}
+
+		/* The counters are all in use. */
+		return -EAGAIN;
+	}
+}
+
+static void
+armv6pmu_disable_event(struct hw_perf_event *hwc,
+		       int idx)
+{
+	unsigned long val, mask, evt, flags;
+
+	if (ARMV6_CYCLE_COUNTER == idx) {
+		mask	= ARMV6_PMCR_CCOUNT_IEN;
+		evt	= 0;
+	} else if (ARMV6_COUNTER0 == idx) {
+		mask	= ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK;
+		evt	= ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT;
+	} else if (ARMV6_COUNTER1 == idx) {
+		mask	= ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK;
+		evt	= ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT;
+	} else {
+		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+		return;
+	}
+
+	/*
+	 * Mask out the current event and set the counter to count the number
+	 * of ETM bus signal assertion cycles. The external reporting should
+	 * be disabled and so this should never increment.
+	 */
+	spin_lock_irqsave(&pmu_lock, flags);
+	val = armv6_pmcr_read();
+	val &= ~mask;
+	val |= evt;
+	armv6_pmcr_write(val);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc,
+			      int idx)
+{
+	unsigned long val, mask, flags, evt = 0;
+
+	if (ARMV6_CYCLE_COUNTER == idx) {
+		mask	= ARMV6_PMCR_CCOUNT_IEN;
+	} else if (ARMV6_COUNTER0 == idx) {
+		mask	= ARMV6_PMCR_COUNT0_IEN;
+	} else if (ARMV6_COUNTER1 == idx) {
+		mask	= ARMV6_PMCR_COUNT1_IEN;
+	} else {
+		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+		return;
+	}
+
+	/*
+	 * Unlike UP ARMv6, we don't have a way of stopping the counters. We
+	 * simply disable the interrupt reporting.
+	 */
+	spin_lock_irqsave(&pmu_lock, flags);
+	val = armv6_pmcr_read();
+	val &= ~mask;
+	val |= evt;
+	armv6_pmcr_write(val);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static const struct arm_pmu armv6pmu = {
+	.name			= "v6",
+	.handle_irq		= armv6pmu_handle_irq,
+	.enable			= armv6pmu_enable_event,
+	.disable		= armv6pmu_disable_event,
+	.event_map		= armv6pmu_event_map,
+	.raw_event		= armv6pmu_raw_event,
+	.read_counter		= armv6pmu_read_counter,
+	.write_counter		= armv6pmu_write_counter,
+	.get_event_idx		= armv6pmu_get_event_idx,
+	.start			= armv6pmu_start,
+	.stop			= armv6pmu_stop,
+	.num_events		= 3,
+	.max_period		= (1LLU << 32) - 1,
+};
+
+/*
+ * ARMv6mpcore is almost identical to single core ARMv6 with the exception
+ * that some of the events have different enumerations and that there is no
+ * *hack* to stop the programmable counters. To stop the counters we simply
+ * disable the interrupt reporting and update the event. When unthrottling we
+ * reset the period and enable the interrupt reporting.
+ */
+static const struct arm_pmu armv6mpcore_pmu = {
+	.name			= "v6mpcore",
+	.handle_irq		= armv6pmu_handle_irq,
+	.enable			= armv6pmu_enable_event,
+	.disable		= armv6mpcore_pmu_disable_event,
+	.event_map		= armv6mpcore_pmu_event_map,
+	.raw_event		= armv6pmu_raw_event,
+	.read_counter		= armv6pmu_read_counter,
+	.write_counter		= armv6pmu_write_counter,
+	.get_event_idx		= armv6pmu_get_event_idx,
+	.start			= armv6pmu_start,
+	.stop			= armv6pmu_stop,
+	.num_events		= 3,
+	.max_period		= (1LLU << 32) - 1,
+};
+
+/*
+ * ARMv7 Cortex-A8 and Cortex-A9 Performance Events handling code.
+ *
+ * Copied from ARMv6 code, with the low level code inspired
+ *  by the ARMv7 Oprofile code.
+ *
+ * Cortex-A8 has up to 4 configurable performance counters and
+ *  a single cycle counter.
+ * Cortex-A9 has up to 31 configurable performance counters and
+ *  a single cycle counter.
+ *
+ * All counters can be enabled/disabled and IRQ masked separately. The cycle
+ *  counter and all 4 performance counters together can be reset separately.
+ */
+
+#define ARMV7_PMU_CORTEX_A8_NAME		"ARMv7 Cortex-A8"
+
+#define ARMV7_PMU_CORTEX_A9_NAME		"ARMv7 Cortex-A9"
+
+/* Common ARMv7 event types */
+enum armv7_perf_types {
+	ARMV7_PERFCTR_PMNC_SW_INCR		= 0x00,
+	ARMV7_PERFCTR_IFETCH_MISS		= 0x01,
+	ARMV7_PERFCTR_ITLB_MISS			= 0x02,
+	ARMV7_PERFCTR_DCACHE_REFILL		= 0x03,
+	ARMV7_PERFCTR_DCACHE_ACCESS		= 0x04,
+	ARMV7_PERFCTR_DTLB_REFILL		= 0x05,
+	ARMV7_PERFCTR_DREAD			= 0x06,
+	ARMV7_PERFCTR_DWRITE			= 0x07,
+
+	ARMV7_PERFCTR_EXC_TAKEN			= 0x09,
+	ARMV7_PERFCTR_EXC_EXECUTED		= 0x0A,
+	ARMV7_PERFCTR_CID_WRITE			= 0x0B,
+	/* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
+	 * It counts:
+	 *  - all branch instructions,
+	 *  - instructions that explicitly write the PC,
+	 *  - exception generating instructions.
+	 */
+	ARMV7_PERFCTR_PC_WRITE			= 0x0C,
+	ARMV7_PERFCTR_PC_IMM_BRANCH		= 0x0D,
+	ARMV7_PERFCTR_UNALIGNED_ACCESS		= 0x0F,
+	ARMV7_PERFCTR_PC_BRANCH_MIS_PRED	= 0x10,
+	ARMV7_PERFCTR_CLOCK_CYCLES		= 0x11,
+
+	ARMV7_PERFCTR_PC_BRANCH_MIS_USED	= 0x12,
+
+	ARMV7_PERFCTR_CPU_CYCLES		= 0xFF
+};
+
+/* ARMv7 Cortex-A8 specific event types */
+enum armv7_a8_perf_types {
+	ARMV7_PERFCTR_INSTR_EXECUTED		= 0x08,
+
+	ARMV7_PERFCTR_PC_PROC_RETURN		= 0x0E,
+
+	ARMV7_PERFCTR_WRITE_BUFFER_FULL		= 0x40,
+	ARMV7_PERFCTR_L2_STORE_MERGED		= 0x41,
+	ARMV7_PERFCTR_L2_STORE_BUFF		= 0x42,
+	ARMV7_PERFCTR_L2_ACCESS			= 0x43,
+	ARMV7_PERFCTR_L2_CACH_MISS		= 0x44,
+	ARMV7_PERFCTR_AXI_READ_CYCLES		= 0x45,
+	ARMV7_PERFCTR_AXI_WRITE_CYCLES		= 0x46,
+	ARMV7_PERFCTR_MEMORY_REPLAY		= 0x47,
+	ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY	= 0x48,
+	ARMV7_PERFCTR_L1_DATA_MISS		= 0x49,
+	ARMV7_PERFCTR_L1_INST_MISS		= 0x4A,
+	ARMV7_PERFCTR_L1_DATA_COLORING		= 0x4B,
+	ARMV7_PERFCTR_L1_NEON_DATA		= 0x4C,
+	ARMV7_PERFCTR_L1_NEON_CACH_DATA		= 0x4D,
+	ARMV7_PERFCTR_L2_NEON			= 0x4E,
+	ARMV7_PERFCTR_L2_NEON_HIT		= 0x4F,
+	ARMV7_PERFCTR_L1_INST			= 0x50,
+	ARMV7_PERFCTR_PC_RETURN_MIS_PRED	= 0x51,
+	ARMV7_PERFCTR_PC_BRANCH_FAILED		= 0x52,
+	ARMV7_PERFCTR_PC_BRANCH_TAKEN		= 0x53,
+	ARMV7_PERFCTR_PC_BRANCH_EXECUTED	= 0x54,
+	ARMV7_PERFCTR_OP_EXECUTED		= 0x55,
+	ARMV7_PERFCTR_CYCLES_INST_STALL		= 0x56,
+	ARMV7_PERFCTR_CYCLES_INST		= 0x57,
+	ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL	= 0x58,
+	ARMV7_PERFCTR_CYCLES_NEON_INST_STALL	= 0x59,
+	ARMV7_PERFCTR_NEON_CYCLES		= 0x5A,
+
+	ARMV7_PERFCTR_PMU0_EVENTS		= 0x70,
+	ARMV7_PERFCTR_PMU1_EVENTS		= 0x71,
+	ARMV7_PERFCTR_PMU_EVENTS		= 0x72,
+};
+
+/* ARMv7 Cortex-A9 specific event types */
+enum armv7_a9_perf_types {
+	ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC	= 0x40,
+	ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC	= 0x41,
+	ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC	= 0x42,
+
+	ARMV7_PERFCTR_COHERENT_LINE_MISS	= 0x50,
+	ARMV7_PERFCTR_COHERENT_LINE_HIT		= 0x51,
+
+	ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES	= 0x60,
+	ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES	= 0x61,
+	ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES	= 0x62,
+	ARMV7_PERFCTR_STREX_EXECUTED_PASSED	= 0x63,
+	ARMV7_PERFCTR_STREX_EXECUTED_FAILED	= 0x64,
+	ARMV7_PERFCTR_DATA_EVICTION		= 0x65,
+	ARMV7_PERFCTR_ISSUE_STAGE_NO_INST	= 0x66,
+	ARMV7_PERFCTR_ISSUE_STAGE_EMPTY		= 0x67,
+	ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE	= 0x68,
+
+	ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS	= 0x6E,
+
+	ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST	= 0x70,
+	ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST	= 0x71,
+	ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST	= 0x72,
+	ARMV7_PERFCTR_FP_EXECUTED_INST		= 0x73,
+	ARMV7_PERFCTR_NEON_EXECUTED_INST	= 0x74,
+
+	ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES	= 0x80,
+	ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES	= 0x81,
+	ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES	= 0x82,
+	ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES	= 0x83,
+	ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES	= 0x84,
+	ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES 	= 0x85,
+	ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES	= 0x86,
+
+	ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES	= 0x8A,
+	ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES	= 0x8B,
+
+	ARMV7_PERFCTR_ISB_INST			= 0x90,
+	ARMV7_PERFCTR_DSB_INST			= 0x91,
+	ARMV7_PERFCTR_DMB_INST			= 0x92,
+	ARMV7_PERFCTR_EXT_INTERRUPTS		= 0x93,
+
+	ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED	= 0xA0,
+	ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED	= 0xA1,
+	ARMV7_PERFCTR_PLE_FIFO_FLUSH		= 0xA2,
+	ARMV7_PERFCTR_PLE_RQST_COMPLETED	= 0xA3,
+	ARMV7_PERFCTR_PLE_FIFO_OVERFLOW		= 0xA4,
+	ARMV7_PERFCTR_PLE_RQST_PROG		= 0xA5
+};
+
+/*
+ * Cortex-A8 HW events mapping
+ *
+ * The hardware events that we support. We do support cache operations but
+ * we have harvard caches and no way to combine instruction and data
+ * accesses/misses in hardware.
+ */
+static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV7_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV7_PERFCTR_INSTR_EXECUTED,
+	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
+	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+	[PERF_COUNT_HW_BUS_CYCLES]	    = ARMV7_PERFCTR_CLOCK_CYCLES,
+};
+
+static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+					  [PERF_COUNT_HW_CACHE_OP_MAX]
+					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+	[C(L1D)] = {
+		/*
+		 * The performance counters don't differentiate between read
+		 * and write accesses/misses so this isn't strictly correct,
+		 * but it's the best we can do. Writes and reads get
+		 * combined.
+		 */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_INST,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_INST_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_INST,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_INST_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L2_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L2_CACH_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L2_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L2_CACH_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		/*
+		 * Only ITLB misses and DTLB refills are supported.
+		 * If users want the DTLB refills misses a raw counter
+		 * must be used.
+		 */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
+			[C(RESULT_MISS)]
+					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
+			[C(RESULT_MISS)]
+					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
+/*
+ * Cortex-A9 HW events mapping
+ */
+static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV7_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]	    =
+					ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE,
+	[PERF_COUNT_HW_CACHE_REFERENCES]    = ARMV7_PERFCTR_COHERENT_LINE_HIT,
+	[PERF_COUNT_HW_CACHE_MISSES]	    = ARMV7_PERFCTR_COHERENT_LINE_MISS,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
+	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+	[PERF_COUNT_HW_BUS_CYCLES]	    = ARMV7_PERFCTR_CLOCK_CYCLES,
+};
+
+static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+					  [PERF_COUNT_HW_CACHE_OP_MAX]
+					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+	[C(L1D)] = {
+		/*
+		 * The performance counters don't differentiate between read
+		 * and write accesses/misses so this isn't strictly correct,
+		 * but it's the best we can do. Writes and reads get
+		 * combined.
+		 */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_IFETCH_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_IFETCH_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		/*
+		 * Only ITLB misses and DTLB refills are supported.
+		 * If users want the DTLB refills misses a raw counter
+		 * must be used.
+		 */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
+			[C(RESULT_MISS)]
+					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
+			[C(RESULT_MISS)]
+					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
+/*
+ * Perf Events counters
+ */
+enum armv7_counters {
+	ARMV7_CYCLE_COUNTER 		= 1,	/* Cycle counter */
+	ARMV7_COUNTER0			= 2,	/* First event counter */
+};
+
+/*
+ * The cycle counter is ARMV7_CYCLE_COUNTER.
+ * The first event counter is ARMV7_COUNTER0.
+ * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1).
+ */
+#define	ARMV7_COUNTER_LAST	(ARMV7_COUNTER0 + armpmu->num_events - 1)
+
+/*
+ * ARMv7 low level PMNC access
+ */
+
+/*
+ * Per-CPU PMNC: config reg
+ */
+#define ARMV7_PMNC_E		(1 << 0) /* Enable all counters */
+#define ARMV7_PMNC_P		(1 << 1) /* Reset all counters */
+#define ARMV7_PMNC_C		(1 << 2) /* Cycle counter reset */
+#define ARMV7_PMNC_D		(1 << 3) /* CCNT counts every 64th cpu cycle */
+#define ARMV7_PMNC_X		(1 << 4) /* Export to ETM */
+#define ARMV7_PMNC_DP		(1 << 5) /* Disable CCNT if non-invasive debug*/
+#define	ARMV7_PMNC_N_SHIFT	11	 /* Number of counters supported */
+#define	ARMV7_PMNC_N_MASK	0x1f
+#define	ARMV7_PMNC_MASK		0x3f	 /* Mask for writable bits */
+
+/*
+ * Available counters
+ */
+#define ARMV7_CNT0 		0	/* First event counter */
+#define ARMV7_CCNT 		31	/* Cycle counter */
+
+/* Perf Event to low level counters mapping */
+#define ARMV7_EVENT_CNT_TO_CNTx	(ARMV7_COUNTER0 - ARMV7_CNT0)
+
+/*
+ * CNTENS: counters enable reg
+ */
+#define ARMV7_CNTENS_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_CNTENS_C		(1 << ARMV7_CCNT)
+
+/*
+ * CNTENC: counters disable reg
+ */
+#define ARMV7_CNTENC_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_CNTENC_C		(1 << ARMV7_CCNT)
+
+/*
+ * INTENS: counters overflow interrupt enable reg
+ */
+#define ARMV7_INTENS_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_INTENS_C		(1 << ARMV7_CCNT)
+
+/*
+ * INTENC: counters overflow interrupt disable reg
+ */
+#define ARMV7_INTENC_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_INTENC_C		(1 << ARMV7_CCNT)
+
+/*
+ * EVTSEL: Event selection reg
+ */
+#define	ARMV7_EVTSEL_MASK	0x7f		/* Mask for writable bits */
+
+/*
+ * SELECT: Counter selection reg
+ */
+#define	ARMV7_SELECT_MASK	0x1f		/* Mask for writable bits */
+
+/*
+ * FLAG: counters overflow flag status reg
+ */
+#define ARMV7_FLAG_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_FLAG_C		(1 << ARMV7_CCNT)
+#define	ARMV7_FLAG_MASK		0xffffffff	/* Mask for writable bits */
+#define	ARMV7_OVERFLOWED_MASK	ARMV7_FLAG_MASK
+
+static inline unsigned long armv7_pmnc_read(void)
+{
+	u32 val;
+	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val));
+	return val;
+}
+
+static inline void armv7_pmnc_write(unsigned long val)
+{
+	val &= ARMV7_PMNC_MASK;
+	asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
+}
+
+static inline int armv7_pmnc_has_overflowed(unsigned long pmnc)
+{
+	return pmnc & ARMV7_OVERFLOWED_MASK;
+}
+
+static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
+					enum armv7_counters counter)
+{
+	int ret;
+
+	if (counter == ARMV7_CYCLE_COUNTER)
+		ret = pmnc & ARMV7_FLAG_C;
+	else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST))
+		ret = pmnc & ARMV7_FLAG_P(counter);
+	else
+		pr_err("CPU%u checking wrong counter %d overflow status\n",
+			smp_processor_id(), counter);
+
+	return ret;
+}
+
+static inline int armv7_pmnc_select_counter(unsigned int idx)
+{
+	u32 val;
+
+	if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) {
+		pr_err("CPU%u selecting wrong PMNC counter"
+			" %d\n", smp_processor_id(), idx);
+		return -1;
+	}
+
+	val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK;
+	asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
+
+	return idx;
+}
+
+static inline u32 armv7pmu_read_counter(int idx)
+{
+	unsigned long value = 0;
+
+	if (idx == ARMV7_CYCLE_COUNTER)
+		asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
+	else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
+		if (armv7_pmnc_select_counter(idx) == idx)
+			asm volatile("mrc p15, 0, %0, c9, c13, 2"
+				     : "=r" (value));
+	} else
+		pr_err("CPU%u reading wrong counter %d\n",
+			smp_processor_id(), idx);
+
+	return value;
+}
+
+static inline void armv7pmu_write_counter(int idx, u32 value)
+{
+	if (idx == ARMV7_CYCLE_COUNTER)
+		asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
+	else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
+		if (armv7_pmnc_select_counter(idx) == idx)
+			asm volatile("mcr p15, 0, %0, c9, c13, 2"
+				     : : "r" (value));
+	} else
+		pr_err("CPU%u writing wrong counter %d\n",
+			smp_processor_id(), idx);
+}
+
+static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val)
+{
+	if (armv7_pmnc_select_counter(idx) == idx) {
+		val &= ARMV7_EVTSEL_MASK;
+		asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
+	}
+}
+
+static inline u32 armv7_pmnc_enable_counter(unsigned int idx)
+{
+	u32 val;
+
+	if ((idx != ARMV7_CYCLE_COUNTER) &&
+	    ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+		pr_err("CPU%u enabling wrong PMNC counter"
+			" %d\n", smp_processor_id(), idx);
+		return -1;
+	}
+
+	if (idx == ARMV7_CYCLE_COUNTER)
+		val = ARMV7_CNTENS_C;
+	else
+		val = ARMV7_CNTENS_P(idx);
+
+	asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
+
+	return idx;
+}
+
+static inline u32 armv7_pmnc_disable_counter(unsigned int idx)
+{
+	u32 val;
+
+
+	if ((idx != ARMV7_CYCLE_COUNTER) &&
+	    ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+		pr_err("CPU%u disabling wrong PMNC counter"
+			" %d\n", smp_processor_id(), idx);
+		return -1;
+	}
+
+	if (idx == ARMV7_CYCLE_COUNTER)
+		val = ARMV7_CNTENC_C;
+	else
+		val = ARMV7_CNTENC_P(idx);
+
+	asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
+
+	return idx;
+}
+
+static inline u32 armv7_pmnc_enable_intens(unsigned int idx)
+{
+	u32 val;
+
+	if ((idx != ARMV7_CYCLE_COUNTER) &&
+	    ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+		pr_err("CPU%u enabling wrong PMNC counter"
+			" interrupt enable %d\n", smp_processor_id(), idx);
+		return -1;
+	}
+
+	if (idx == ARMV7_CYCLE_COUNTER)
+		val = ARMV7_INTENS_C;
+	else
+		val = ARMV7_INTENS_P(idx);
+
+	asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
+
+	return idx;
+}
+
+static inline u32 armv7_pmnc_disable_intens(unsigned int idx)
+{
+	u32 val;
+
+	if ((idx != ARMV7_CYCLE_COUNTER) &&
+	    ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+		pr_err("CPU%u disabling wrong PMNC counter"
+			" interrupt enable %d\n", smp_processor_id(), idx);
+		return -1;
+	}
+
+	if (idx == ARMV7_CYCLE_COUNTER)
+		val = ARMV7_INTENC_C;
+	else
+		val = ARMV7_INTENC_P(idx);
+
+	asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val));
+
+	return idx;
+}
+
+static inline u32 armv7_pmnc_getreset_flags(void)
+{
+	u32 val;
+
+	/* Read */
+	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
+
+	/* Write to clear flags */
+	val &= ARMV7_FLAG_MASK;
+	asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val));
+
+	return val;
+}
+
+#ifdef DEBUG
+static void armv7_pmnc_dump_regs(void)
+{
+	u32 val;
+	unsigned int cnt;
+
+	printk(KERN_INFO "PMNC registers dump:\n");
+
+	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
+	printk(KERN_INFO "PMNC  =0x%08x\n", val);
+
+	asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
+	printk(KERN_INFO "CNTENS=0x%08x\n", val);
+
+	asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
+	printk(KERN_INFO "INTENS=0x%08x\n", val);
+
+	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
+	printk(KERN_INFO "FLAGS =0x%08x\n", val);
+
+	asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
+	printk(KERN_INFO "SELECT=0x%08x\n", val);
+
+	asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
+	printk(KERN_INFO "CCNT  =0x%08x\n", val);
+
+	for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) {
+		armv7_pmnc_select_counter(cnt);
+		asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
+		printk(KERN_INFO "CNT[%d] count =0x%08x\n",
+			cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
+		asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
+		printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n",
+			cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
+	}
+}
+#endif
+
+void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx)
+{
+	unsigned long flags;
+
+	/*
+	 * Enable counter and interrupt, and set the counter to count
+	 * the event that we're interested in.
+	 */
+	spin_lock_irqsave(&pmu_lock, flags);
+
+	/*
+	 * Disable counter
+	 */
+	armv7_pmnc_disable_counter(idx);
+
+	/*
+	 * Set event (if destined for PMNx counters)
+	 * We don't need to set the event if it's a cycle count
+	 */
+	if (idx != ARMV7_CYCLE_COUNTER)
+		armv7_pmnc_write_evtsel(idx, hwc->config_base);
+
+	/*
+	 * Enable interrupt for this counter
+	 */
+	armv7_pmnc_enable_intens(idx);
+
+	/*
+	 * Enable counter
+	 */
+	armv7_pmnc_enable_counter(idx);
+
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx)
+{
+	unsigned long flags;
+
+	/*
+	 * Disable counter and interrupt
+	 */
+	spin_lock_irqsave(&pmu_lock, flags);
+
+	/*
+	 * Disable counter
+	 */
+	armv7_pmnc_disable_counter(idx);
+
+	/*
+	 * Disable interrupt for this counter
+	 */
+	armv7_pmnc_disable_intens(idx);
+
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
+{
+	unsigned long pmnc;
+	struct perf_sample_data data;
+	struct cpu_hw_events *cpuc;
+	struct pt_regs *regs;
+	int idx;
+
+	/*
+	 * Get and reset the IRQ flags
+	 */
+	pmnc = armv7_pmnc_getreset_flags();
+
+	/*
+	 * Did an overflow occur?
+	 */
+	if (!armv7_pmnc_has_overflowed(pmnc))
+		return IRQ_NONE;
+
+	/*
+	 * Handle the counter(s) overflow(s)
+	 */
+	regs = get_irq_regs();
+
+	data.addr = 0;
+
+	cpuc = &__get_cpu_var(cpu_hw_events);
+	for (idx = 0; idx <= armpmu->num_events; ++idx) {
+		struct perf_event *event = cpuc->events[idx];
+		struct hw_perf_event *hwc;
+
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+
+		/*
+		 * We have a single interrupt for all counters. Check that
+		 * each counter has overflowed before we process it.
+		 */
+		if (!armv7_pmnc_counter_has_overflowed(pmnc, idx))
+			continue;
+
+		hwc = &event->hw;
+		armpmu_event_update(event, hwc, idx);
+		data.period = event->hw.last_period;
+		if (!armpmu_event_set_period(event, hwc, idx))
+			continue;
+
+		if (perf_event_overflow(event, 0, &data, regs))
+			armpmu->disable(hwc, idx);
+	}
+
+	/*
+	 * Handle the pending perf events.
+	 *
+	 * Note: this call *must* be run with interrupts enabled. For
+	 * platforms that can have the PMU interrupts raised as a PMI, this
+	 * will not work.
+	 */
+	perf_event_do_pending();
+
+	return IRQ_HANDLED;
+}
+
+static void armv7pmu_start(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pmu_lock, flags);
+	/* Enable all counters */
+	armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void armv7pmu_stop(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pmu_lock, flags);
+	/* Disable all counters */
+	armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static inline int armv7_a8_pmu_event_map(int config)
+{
+	int mapping = armv7_a8_perf_map[config];
+	if (HW_OP_UNSUPPORTED == mapping)
+		mapping = -EOPNOTSUPP;
+	return mapping;
+}
+
+static inline int armv7_a9_pmu_event_map(int config)
+{
+	int mapping = armv7_a9_perf_map[config];
+	if (HW_OP_UNSUPPORTED == mapping)
+		mapping = -EOPNOTSUPP;
+	return mapping;
+}
+
+static u64 armv7pmu_raw_event(u64 config)
+{
+	return config & 0xff;
+}
+
+static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc,
+				  struct hw_perf_event *event)
+{
+	int idx;
+
+	/* Always place a cycle counter into the cycle counter. */
+	if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) {
+		if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask))
+			return -EAGAIN;
+
+		return ARMV7_CYCLE_COUNTER;
+	} else {
+		/*
+		 * For anything other than a cycle counter, try and use
+		 * the events counters
+		 */
+		for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) {
+			if (!test_and_set_bit(idx, cpuc->used_mask))
+				return idx;
+		}
+
+		/* The counters are all in use. */
+		return -EAGAIN;
+	}
+}
+
+static struct arm_pmu armv7pmu = {
+	.handle_irq		= armv7pmu_handle_irq,
+	.enable			= armv7pmu_enable_event,
+	.disable		= armv7pmu_disable_event,
+	.raw_event		= armv7pmu_raw_event,
+	.read_counter		= armv7pmu_read_counter,
+	.write_counter		= armv7pmu_write_counter,
+	.get_event_idx		= armv7pmu_get_event_idx,
+	.start			= armv7pmu_start,
+	.stop			= armv7pmu_stop,
+	.max_period		= (1LLU << 32) - 1,
+};
+
+static u32 __init armv7_reset_read_pmnc(void)
+{
+	u32 nb_cnt;
+
+	/* Initialize & Reset PMNC: C and P bits */
+	armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
+
+	/* Read the nb of CNTx counters supported from PMNC */
+	nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK;
+
+	/* Add the CPU cycles counter and return */
+	return nb_cnt + 1;
+}
+
+static int __init
+init_hw_perf_events(void)
+{
+	unsigned long cpuid = read_cpuid_id();
+	unsigned long implementor = (cpuid & 0xFF000000) >> 24;
+	unsigned long part_number = (cpuid & 0xFFF0);
+
+	/* We only support ARM CPUs implemented by ARM at the moment. */
+	if (0x41 == implementor) {
+		switch (part_number) {
+		case 0xB360:	/* ARM1136 */
+		case 0xB560:	/* ARM1156 */
+		case 0xB760:	/* ARM1176 */
+			armpmu = &armv6pmu;
+			memcpy(armpmu_perf_cache_map, armv6_perf_cache_map,
+					sizeof(armv6_perf_cache_map));
+			perf_max_events	= armv6pmu.num_events;
+			break;
+		case 0xB020:	/* ARM11mpcore */
+			armpmu = &armv6mpcore_pmu;
+			memcpy(armpmu_perf_cache_map,
+			       armv6mpcore_perf_cache_map,
+			       sizeof(armv6mpcore_perf_cache_map));
+			perf_max_events = armv6mpcore_pmu.num_events;
+			break;
+		case 0xC080:	/* Cortex-A8 */
+			armv7pmu.name = ARMV7_PMU_CORTEX_A8_NAME;
+			memcpy(armpmu_perf_cache_map, armv7_a8_perf_cache_map,
+				sizeof(armv7_a8_perf_cache_map));
+			armv7pmu.event_map = armv7_a8_pmu_event_map;
+			armpmu = &armv7pmu;
+
+			/* Reset PMNC and read the nb of CNTx counters
+			    supported */
+			armv7pmu.num_events = armv7_reset_read_pmnc();
+			perf_max_events = armv7pmu.num_events;
+			break;
+		case 0xC090:	/* Cortex-A9 */
+			armv7pmu.name = ARMV7_PMU_CORTEX_A9_NAME;
+			memcpy(armpmu_perf_cache_map, armv7_a9_perf_cache_map,
+				sizeof(armv7_a9_perf_cache_map));
+			armv7pmu.event_map = armv7_a9_pmu_event_map;
+			armpmu = &armv7pmu;
+
+			/* Reset PMNC and read the nb of CNTx counters
+			    supported */
+			armv7pmu.num_events = armv7_reset_read_pmnc();
+			perf_max_events = armv7pmu.num_events;
+			break;
+		default:
+			pr_info("no hardware support available\n");
+			perf_max_events = -1;
+		}
+	}
+
+	if (armpmu)
+		pr_info("enabled with %s PMU driver, %d counters available\n",
+			armpmu->name, armpmu->num_events);
+
+	return 0;
+}
+arch_initcall(init_hw_perf_events);
+
+/*
+ * Callchain handling code.
+ */
+static inline void
+callchain_store(struct perf_callchain_entry *entry,
+		u64 ip)
+{
+	if (entry->nr < PERF_MAX_STACK_DEPTH)
+		entry->ip[entry->nr++] = ip;
+}
+
+/*
+ * The registers we're interested in are at the end of the variable
+ * length saved register structure. The fp points at the end of this
+ * structure so the address of this struct is:
+ * (struct frame_tail *)(xxx->fp)-1
+ *
+ * This code has been adapted from the ARM OProfile support.
+ */
+struct frame_tail {
+	struct frame_tail   *fp;
+	unsigned long	    sp;
+	unsigned long	    lr;
+} __attribute__((packed));
+
+/*
+ * Get the return address for a single stackframe and return a pointer to the
+ * next frame tail.
+ */
+static struct frame_tail *
+user_backtrace(struct frame_tail *tail,
+	       struct perf_callchain_entry *entry)
+{
+	struct frame_tail buftail;
+
+	/* Also check accessibility of one struct frame_tail beyond */
+	if (!access_ok(VERIFY_READ, tail, sizeof(buftail)))
+		return NULL;
+	if (__copy_from_user_inatomic(&buftail, tail, sizeof(buftail)))
+		return NULL;
+
+	callchain_store(entry, buftail.lr);
+
+	/*
+	 * Frame pointers should strictly progress back up the stack
+	 * (towards higher addresses).
+	 */
+	if (tail >= buftail.fp)
+		return NULL;
+
+	return buftail.fp - 1;
+}
+
+static void
+perf_callchain_user(struct pt_regs *regs,
+		    struct perf_callchain_entry *entry)
+{
+	struct frame_tail *tail;
+
+	callchain_store(entry, PERF_CONTEXT_USER);
+
+	if (!user_mode(regs))
+		regs = task_pt_regs(current);
+
+	tail = (struct frame_tail *)regs->ARM_fp - 1;
+
+	while (tail && !((unsigned long)tail & 0x3))
+		tail = user_backtrace(tail, entry);
+}
+
+/*
+ * Gets called by walk_stackframe() for every stackframe. This will be called
+ * whist unwinding the stackframe and is like a subroutine return so we use
+ * the PC.
+ */
+static int
+callchain_trace(struct stackframe *fr,
+		void *data)
+{
+	struct perf_callchain_entry *entry = data;
+	callchain_store(entry, fr->pc);
+	return 0;
+}
+
+static void
+perf_callchain_kernel(struct pt_regs *regs,
+		      struct perf_callchain_entry *entry)
+{
+	struct stackframe fr;
+
+	callchain_store(entry, PERF_CONTEXT_KERNEL);
+	fr.fp = regs->ARM_fp;
+	fr.sp = regs->ARM_sp;
+	fr.lr = regs->ARM_lr;
+	fr.pc = regs->ARM_pc;
+	walk_stackframe(&fr, callchain_trace, entry);
+}
+
+static void
+perf_do_callchain(struct pt_regs *regs,
+		  struct perf_callchain_entry *entry)
+{
+	int is_user;
+
+	if (!regs)
+		return;
+
+	is_user = user_mode(regs);
+
+	if (!current || !current->pid)
+		return;
+
+	if (is_user && current->state != TASK_RUNNING)
+		return;
+
+	if (!is_user)
+		perf_callchain_kernel(regs, entry);
+
+	if (current->mm)
+		perf_callchain_user(regs, entry);
+}
+
+static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_irq_entry);
+
+struct perf_callchain_entry *
+perf_callchain(struct pt_regs *regs)
+{
+	struct perf_callchain_entry *entry = &__get_cpu_var(pmc_irq_entry);
+
+	entry->nr = 0;
+	perf_do_callchain(regs, entry);
+	return entry;
+}

arch/arm/kernel/pmu.c

+/*
+ *  linux/arch/arm/kernel/pmu.c
+ *
+ *  Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/cpumask.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <asm/pmu.h>
+
+/*
+ * Define the IRQs for the system. We could use something like a platform
+ * device but that seems fairly heavyweight for this. Also, the performance
+ * counters can't be removed or hotplugged.
+ *
+ * Ordering is important: init_pmu() will use the ordering to set the affinity
+ * to the corresponding core. e.g. the first interrupt will go to cpu 0, the
+ * second goes to cpu 1 etc.
+ */
+static const int irqs[] = {
+#if defined(CONFIG_ARCH_OMAP2)
+	3,
+#elif defined(CONFIG_ARCH_BCMRING)
+	IRQ_PMUIRQ,
+#elif defined(CONFIG_MACH_REALVIEW_EB)
+	IRQ_EB11MP_PMU_CPU0,
+	IRQ_EB11MP_PMU_CPU1,
+	IRQ_EB11MP_PMU_CPU2,
+	IRQ_EB11MP_PMU_CPU3,
+#elif defined(CONFIG_ARCH_OMAP3)
+	INT_34XX_BENCH_MPU_EMUL,
+#elif defined(CONFIG_ARCH_IOP32X)
+	IRQ_IOP32X_CORE_PMU,
+#elif defined(CONFIG_ARCH_IOP33X)
+	IRQ_IOP33X_CORE_PMU,
+#elif defined(CONFIG_ARCH_PXA)
+	IRQ_PMU,
+#endif
+};
+
+static const struct pmu_irqs pmu_irqs = {
+	.irqs	    = irqs,
+	.num_irqs   = ARRAY_SIZE(irqs),
+};
+
+static volatile long pmu_lock;
+
+const struct pmu_irqs *
+reserve_pmu(void)
+{
+	return test_and_set_bit_lock(0, &pmu_lock) ? ERR_PTR(-EBUSY) :
+		&pmu_irqs;
+}
+EXPORT_SYMBOL_GPL(reserve_pmu);
+
+int
+release_pmu(const struct pmu_irqs *irqs)
+{
+	if (WARN_ON(irqs != &pmu_irqs))
+		return -EINVAL;
+	clear_bit_unlock(0, &pmu_lock);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(release_pmu);
+
+static int
+set_irq_affinity(int irq,
+		 unsigned int cpu)
+{
+#ifdef CONFIG_SMP
+	int err = irq_set_affinity(irq, cpumask_of(cpu));
+	if (err)
+		pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
+			   irq, cpu);
+	return err;
+#else
+	return 0;
+#endif
+}
+
+int
+init_pmu(void)
+{
+	int i, err = 0;
+
+	for (i = 0; i < pmu_irqs.num_irqs; ++i) {
+		err = set_irq_affinity(pmu_irqs.irqs[i], i);
+		if (err)
+			break;
+	}
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(init_pmu);

arch/arm/mm/fault.c

@@ -18,6 +18,7 @@
 #include <linux/page-flags.h>
 #include <linux/sched.h>
 #include <linux/highmem.h>
+#include <linux/perf_event.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
@@ -302,6 +303,12 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	fault = __do_page_fault(mm, addr, fsr, tsk);
 	up_read(&mm->mmap_sem);
 
+	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, addr);
+	if (fault & VM_FAULT_MAJOR)
+		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, regs, addr);
+	else if (fault & VM_FAULT_MINOR)
+		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, regs, addr);
+
 	/*
 	 * Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR
 	 */

arch/arm/oprofile/op_model_arm11_core.c

@@ -132,7 +132,7 @@ static irqreturn_t arm11_pmu_interrupt(int irq, void *arg)
 	return IRQ_HANDLED;
 }
 
-int arm11_request_interrupts(int *irqs, int nr)
+int arm11_request_interrupts(const int *irqs, int nr)
 {
 	unsigned int i;
 	int ret = 0;
@@ -153,7 +153,7 @@ int arm11_request_interrupts(int *irqs, int nr)
 	return ret;
 }
 
-void arm11_release_interrupts(int *irqs, int nr)
+void arm11_release_interrupts(const int *irqs, int nr)
 {
 	unsigned int i;
 

arch/arm/oprofile/op_model_arm11_core.h

@@ -39,7 +39,7 @@
 int arm11_setup_pmu(void);
 int arm11_start_pmu(void);
 int arm11_stop_pmu(void);
-int arm11_request_interrupts(int *, int);
-void arm11_release_interrupts(int *, int);
+int arm11_request_interrupts(const int *, int);
+void arm11_release_interrupts(const int *, int);
 
 #endif

arch/arm/oprofile/op_model_mpcore.c

@@ -32,6 +32,7 @@
 /* #define DEBUG */
 #include <linux/types.h>
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/sched.h>
 #include <linux/oprofile.h>
 #include <linux/interrupt.h>
@@ -43,6 +44,7 @@
 #include <mach/hardware.h>
 #include <mach/board-eb.h>
 #include <asm/system.h>
+#include <asm/pmu.h>
 
 #include "op_counter.h"
 #include "op_arm_model.h"
@@ -58,6 +60,7 @@
  * Bitmask of used SCU counters
  */
 static unsigned int scu_em_used;
+static const struct pmu_irqs *pmu_irqs;
 
 /*
  * 2 helper fns take a counter number from 0-7 (not the userspace-visible counter number)
@@ -225,33 +228,40 @@ static int em_setup_ctrs(void)
 	return 0;
 }
 
-static int arm11_irqs[] = {
-	[0]	= IRQ_EB11MP_PMU_CPU0,
-	[1]	= IRQ_EB11MP_PMU_CPU1,
-	[2]	= IRQ_EB11MP_PMU_CPU2,
-	[3]	= IRQ_EB11MP_PMU_CPU3
-};
-
 static int em_start(void)
 {
 	int ret;
 
-	ret = arm11_request_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs));
+	pmu_irqs = reserve_pmu();
+	if (IS_ERR(pmu_irqs)) {
+		ret = PTR_ERR(pmu_irqs);
+		goto out;
+	}
+
+	ret = arm11_request_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
 	if (ret == 0) {
 		em_call_function(arm11_start_pmu);
 
 		ret = scu_start();
-		if (ret)
-			arm11_release_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs));
+		if (ret) {
+			arm11_release_interrupts(pmu_irqs->irqs,
+						 pmu_irqs->num_irqs);
+		} else {
+			release_pmu(pmu_irqs);
+			pmu_irqs = NULL;
+		}
 	}
+
+out:
 	return ret;
 }
 
 static void em_stop(void)
 {
 	em_call_function(arm11_stop_pmu);
-	arm11_release_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs));
+	arm11_release_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
 	scu_stop();
+	release_pmu(pmu_irqs);
 }
 
 /*
@@ -283,15 +293,7 @@ static int em_setup(void)
 	em_route_irq(IRQ_EB11MP_PMU_SCU6, 3);
 	em_route_irq(IRQ_EB11MP_PMU_SCU7, 3);
 
-	/*
-	 * Send CP15 PMU interrupts to the owner CPU.
-	 */
-	em_route_irq(IRQ_EB11MP_PMU_CPU0, 0);
-	em_route_irq(IRQ_EB11MP_PMU_CPU1, 1);
-	em_route_irq(IRQ_EB11MP_PMU_CPU2, 2);
-	em_route_irq(IRQ_EB11MP_PMU_CPU3, 3);
-
-	return 0;
+	return init_pmu();
 }
 
 struct op_arm_model_spec op_mpcore_spec = {

arch/arm/oprofile/op_model_v6.c

@@ -19,39 +19,47 @@
 /* #define DEBUG */
 #include <linux/types.h>
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/sched.h>
 #include <linux/oprofile.h>
 #include <linux/interrupt.h>
 #include <asm/irq.h>
 #include <asm/system.h>
+#include <asm/pmu.h>
 
 #include "op_counter.h"
 #include "op_arm_model.h"
 #include "op_model_arm11_core.h"
 
-static int irqs[] = {
-#ifdef CONFIG_ARCH_OMAP2
-	3,
-#endif
-#ifdef CONFIG_ARCH_BCMRING
-	IRQ_PMUIRQ, /* for BCMRING, ARM PMU interrupt is 43 */
-#endif
-};
+static const struct pmu_irqs *pmu_irqs;
 
 static void armv6_pmu_stop(void)
 {
 	arm11_stop_pmu();
-	arm11_release_interrupts(irqs, ARRAY_SIZE(irqs));
+	arm11_release_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
+	release_pmu(pmu_irqs);
+	pmu_irqs = NULL;
 }
 
 static int armv6_pmu_start(void)
 {
 	int ret;
 
-	ret = arm11_request_interrupts(irqs, ARRAY_SIZE(irqs));
-	if (ret >= 0)
+	pmu_irqs = reserve_pmu();
+	if (IS_ERR(pmu_irqs)) {
+		ret = PTR_ERR(pmu_irqs);
+		goto out;
+	}
+
+	ret = arm11_request_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
+	if (ret >= 0) {
 		ret = arm11_start_pmu();
+	} else {
+		release_pmu(pmu_irqs);
+		pmu_irqs = NULL;
+	}
 
+out:
 	return ret;
 }
 

arch/arm/oprofile/op_model_v7.c

@@ -11,11 +11,14 @@
  */
 #include <linux/types.h>
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/oprofile.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/smp.h>
 
+#include <asm/pmu.h>
+
 #include "op_counter.h"
 #include "op_arm_model.h"
 #include "op_model_v7.h"
@@ -295,7 +298,7 @@ static irqreturn_t armv7_pmnc_interrupt(int irq, void *arg)
 	return IRQ_HANDLED;
 }
 
-int armv7_request_interrupts(int *irqs, int nr)
+int armv7_request_interrupts(const int *irqs, int nr)
 {
 	unsigned int i;
 	int ret = 0;
@@ -318,7 +321,7 @@ int armv7_request_interrupts(int *irqs, int nr)
 	return ret;
 }
 
-void armv7_release_interrupts(int *irqs, int nr)
+void armv7_release_interrupts(const int *irqs, int nr)
 {
 	unsigned int i;
 
@@ -362,12 +365,7 @@ static void armv7_pmnc_dump_regs(void)
 }
 #endif
 
-
-static int irqs[] = {
-#ifdef CONFIG_ARCH_OMAP3
-	INT_34XX_BENCH_MPU_EMUL,
-#endif
-};
+static const struct pmu_irqs *pmu_irqs;
 
 static void armv7_pmnc_stop(void)
 {
@@ -375,19 +373,29 @@ static void armv7_pmnc_stop(void)
 	armv7_pmnc_dump_regs();
 #endif
 	armv7_stop_pmnc();
-	armv7_release_interrupts(irqs, ARRAY_SIZE(irqs));
+	armv7_release_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
+	release_pmu(pmu_irqs);
+	pmu_irqs = NULL;
 }
 
 static int armv7_pmnc_start(void)
 {
 	int ret;
 
+	pmu_irqs = reserve_pmu();
+	if (IS_ERR(pmu_irqs))
+		return PTR_ERR(pmu_irqs);
+
 #ifdef DEBUG
 	armv7_pmnc_dump_regs();
 #endif
-	ret = armv7_request_interrupts(irqs, ARRAY_SIZE(irqs));
-	if (ret >= 0)
+	ret = armv7_request_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
+	if (ret >= 0) {
 		armv7_start_pmnc();
+	} else {
+		release_pmu(pmu_irqs);
+		pmu_irqs = NULL;
+	}
 
 	return ret;
 }

arch/arm/oprofile/op_model_v7.h

@@ -97,7 +97,7 @@
 int armv7_setup_pmu(void);
 int armv7_start_pmu(void);
 int armv7_stop_pmu(void);
-int armv7_request_interrupts(int *, int);
-void armv7_release_interrupts(int *, int);
+int armv7_request_interrupts(const int *, int);
+void armv7_release_interrupts(const int *, int);
 
 #endif

arch/arm/oprofile/op_model_xscale.c

@@ -17,12 +17,14 @@
 /* #define DEBUG */
 #include <linux/types.h>
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/sched.h>
 #include <linux/oprofile.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
 #include <asm/cputype.h>
+#include <asm/pmu.h>
 
 #include "op_counter.h"
 #include "op_arm_model.h"
@@ -33,17 +35,6 @@
 #define	PMU_RESET	(CCNT_RESET | PMN_RESET)
 #define PMU_CNT64	0x008	/* Make CCNT count every 64th cycle */
 
-/* TODO do runtime detection */
-#ifdef CONFIG_ARCH_IOP32X
-#define XSCALE_PMU_IRQ  IRQ_IOP32X_CORE_PMU
-#endif
-#ifdef CONFIG_ARCH_IOP33X
-#define XSCALE_PMU_IRQ  IRQ_IOP33X_CORE_PMU
-#endif
-#ifdef CONFIG_ARCH_PXA
-#define XSCALE_PMU_IRQ  IRQ_PMU
-#endif
-
 /*
  * Different types of events that can be counted by the XScale PMU
  * as used by Oprofile userspace. Here primarily for documentation
@@ -367,6 +358,8 @@ static irqreturn_t xscale_pmu_interrupt(int irq, void *arg)
 	return IRQ_HANDLED;
 }
 
+static const struct pmu_irqs *pmu_irqs;
+
 static void xscale_pmu_stop(void)
 {
 	u32 pmnc = read_pmnc();
@@ -374,20 +367,30 @@ static void xscale_pmu_stop(void)
 	pmnc &= ~PMU_ENABLE;
 	write_pmnc(pmnc);
 
-	free_irq(XSCALE_PMU_IRQ, results);
+	free_irq(pmu_irqs->irqs[0], results);
+	release_pmu(pmu_irqs);
+	pmu_irqs = NULL;
 }
 
 static int xscale_pmu_start(void)
 {
 	int ret;
-	u32 pmnc = read_pmnc();
+	u32 pmnc;
+
+	pmu_irqs = reserve_pmu();
+	if (IS_ERR(pmu_irqs))
+		return PTR_ERR(pmu_irqs);
+
+	pmnc = read_pmnc();
 
-	ret = request_irq(XSCALE_PMU_IRQ, xscale_pmu_interrupt, IRQF_DISABLED,
-			"XScale PMU", (void *)results);
+	ret = request_irq(pmu_irqs->irqs[0], xscale_pmu_interrupt,
+			  IRQF_DISABLED, "XScale PMU", (void *)results);
 
 	if (ret < 0) {
 		printk(KERN_ERR "oprofile: unable to request IRQ%d for XScale PMU\n",
-			XSCALE_PMU_IRQ);
+		       pmu_irqs->irqs[0]);
+		release_pmu(pmu_irqs);
+		pmu_irqs = NULL;
 		return ret;
 	}