Merge branches 'sh/wdt' and 'sh/rsk-updates' into sh-latest

Conflicts:
	arch/sh/Kconfig
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/Kconfig

@@ -295,6 +295,13 @@ config CPU_SUBTYPE_SH7264
 	select SYS_SUPPORTS_CMT
 	select SYS_SUPPORTS_MTU2
 
+config CPU_SUBTYPE_SH7269
+	bool "Support SH7269 processor"
+	select CPU_SH2A
+	select CPU_HAS_FPU
+	select SYS_SUPPORTS_CMT
+	select SYS_SUPPORTS_MTU2
+
 config CPU_SUBTYPE_MXG
 	bool "Support MX-G processor"
 	select CPU_SH2A
@@ -602,7 +609,8 @@ config SH_CLK_CPG_LEGACY
 	depends on SH_CLK_CPG
 	def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE && \
 		      !CPU_SHX3 && !CPU_SUBTYPE_SH7757 && \
-		      !CPU_SUBTYPE_SH7734 && !CPU_SUBTYPE_SH7264
+		      !CPU_SUBTYPE_SH7734 && !CPU_SUBTYPE_SH7264 && \
+		      !CPU_SUBTYPE_SH7269
 
 source "kernel/time/Kconfig"
 

arch/sh/boards/Kconfig

@@ -133,7 +133,8 @@ config SH_RTS7751R2D
 
 config SH_RSK
 	bool "Renesas Starter Kit"
-	depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7264
+	depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \
+	  CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269
 	help
 	 Select this option if configuring for any of the RSK+ MCU
 	 evaluation platforms.

arch/sh/boards/mach-rsk/Kconfig

@@ -18,6 +18,11 @@ config SH_RSK7264
 	select ARCH_REQUIRE_GPIOLIB
 	depends on CPU_SUBTYPE_SH7264
 
+config SH_RSK7269
+	bool "RSK2+SH7269"
+	select ARCH_REQUIRE_GPIOLIB
+	depends on CPU_SUBTYPE_SH7269
+
 endchoice
 
 endif

arch/sh/boards/mach-rsk/Makefile

 obj-y				:= setup.o
 obj-$(CONFIG_SH_RSK7203)	+= devices-rsk7203.o
 obj-$(CONFIG_SH_RSK7264)	+= devices-rsk7264.o
+obj-$(CONFIG_SH_RSK7269)	+= devices-rsk7269.o

arch/sh/boards/mach-rsk/devices-rsk7269.c

+/*
+ * RSK+SH7269 Support
+ *
+ * Copyright (C) 2012  Renesas Electronics Europe Ltd
+ * Copyright (C) 2012  Phil Edworthy
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/smsc911x.h>
+#include <linux/gpio.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_16BIT | SMSC911X_SWAP_FIFO,
+};
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.start		= 0x24000000,
+		.end		= 0x240000ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 85,
+		.end		= 85,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static struct platform_device *rsk7269_devices[] __initdata = {
+	&smsc911x_device,
+};
+
+static int __init rsk7269_devices_setup(void)
+{
+	return platform_add_devices(rsk7269_devices,
+				    ARRAY_SIZE(rsk7269_devices));
+}
+device_initcall(rsk7269_devices_setup);

arch/sh/configs/rsk7269_defconfig

+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_CPU_SUBTYPE_SH7269=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x02000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_SH_RSK=y
+# CONFIG_SH_TIMER_MTU2 is not set
+CONFIG_SH_PCLK_FREQ=66700000
+CONFIG_BINFMT_FLAT=y
+CONFIG_NET=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_SMSC911X=y
+CONFIG_SMSC_PHY=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=8
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_HWMON is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DEBUG=y
+CONFIG_USB_LIBUSUAL=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_VFAT_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_FTRACE is not set

arch/sh/include/asm/processor.h

@@ -18,7 +18,8 @@ enum cpu_type {
 	CPU_SH7619,
 
 	/* SH-2A types */
-	CPU_SH7201, CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_SH7264, CPU_MXG,
+	CPU_SH7201, CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_SH7264, CPU_SH7269,
+	CPU_MXG,
 
 	/* SH-3 types */
 	CPU_SH7705, CPU_SH7706, CPU_SH7707,

arch/sh/include/cpu-sh2a/cpu/sh7269.h

+#ifndef __ASM_SH7269_H__
+#define __ASM_SH7269_H__
+
+enum {
+	/* Port A */
+	GPIO_PA1, GPIO_PA0,
+
+	/* Port B */
+	GPIO_PB22, GPIO_PB21, GPIO_PB20,
+	GPIO_PB19, GPIO_PB18, GPIO_PB17, GPIO_PB16,
+	GPIO_PB15, GPIO_PB14, GPIO_PB13, GPIO_PB12,
+	GPIO_PB11, GPIO_PB10, GPIO_PB9, GPIO_PB8,
+	GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
+	GPIO_PB3, GPIO_PB2, GPIO_PB1,
+
+	/* Port C */
+	GPIO_PC8,
+	GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
+	GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
+
+	/* Port D */
+	GPIO_PD15, GPIO_PD14, GPIO_PD13, GPIO_PD12,
+	GPIO_PD11, GPIO_PD10, GPIO_PD9, GPIO_PD8,
+	GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
+	GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
+
+	/* Port E */
+	GPIO_PE7, GPIO_PE6, GPIO_PE5, GPIO_PE4,
+	GPIO_PE3, GPIO_PE2, GPIO_PE1, GPIO_PE0,
+
+	/* Port F */
+	GPIO_PF23, GPIO_PF22, GPIO_PF21, GPIO_PF20,
+	GPIO_PF19, GPIO_PF18, GPIO_PF17, GPIO_PF16,
+	GPIO_PF15, GPIO_PF14, GPIO_PF13, GPIO_PF12,
+	GPIO_PF11, GPIO_PF10, GPIO_PF9, GPIO_PF8,
+	GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
+	GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
+
+	/* Port G */
+	GPIO_PG27, GPIO_PG26, GPIO_PG25, GPIO_PG24,
+	GPIO_PG23, GPIO_PG22, GPIO_PG21, GPIO_PG20,
+	GPIO_PG19, GPIO_PG18, GPIO_PG17, GPIO_PG16,
+	GPIO_PG15, GPIO_PG14, GPIO_PG13, GPIO_PG12,
+	GPIO_PG11, GPIO_PG10, GPIO_PG9, GPIO_PG8,
+	GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4,
+	GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0,
+
+	/* Port H */
+	GPIO_PH7, GPIO_PH6, GPIO_PH5, GPIO_PH4,
+	GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0,
+
+	/* Port I - not on device */
+
+	/* Port J */
+	GPIO_PJ31, GPIO_PJ30, GPIO_PJ29, GPIO_PJ28,
+	GPIO_PJ27, GPIO_PJ26, GPIO_PJ25, GPIO_PJ24,
+	GPIO_PJ23, GPIO_PJ22, GPIO_PJ21, GPIO_PJ20,
+	GPIO_PJ19, GPIO_PJ18, GPIO_PJ17, GPIO_PJ16,
+	GPIO_PJ15, GPIO_PJ14, GPIO_PJ13, GPIO_PJ12,
+	GPIO_PJ11, GPIO_PJ10, GPIO_PJ9, GPIO_PJ8,
+	GPIO_PJ7, GPIO_PJ6, GPIO_PJ5, GPIO_PJ4,
+	GPIO_PJ3, GPIO_PJ2, GPIO_PJ1, GPIO_PJ0,
+
+	/* INTC: IRQ and PINT */
+	GPIO_FN_IRQ7_PG, GPIO_FN_IRQ6_PG, GPIO_FN_IRQ5_PG, GPIO_FN_IRQ4_PG,
+	GPIO_FN_IRQ3_PG, GPIO_FN_IRQ2_PG, GPIO_FN_IRQ1_PG, GPIO_FN_IRQ0_PG,
+	GPIO_FN_IRQ7_PF, GPIO_FN_IRQ6_PF, GPIO_FN_IRQ5_PF, GPIO_FN_IRQ4_PF,
+	GPIO_FN_IRQ3_PJ, GPIO_FN_IRQ2_PJ, GPIO_FN_IRQ1_PJ, GPIO_FN_IRQ0_PJ,
+	GPIO_FN_IRQ1_PC, GPIO_FN_IRQ0_PC,
+
+	GPIO_FN_PINT7_PG, GPIO_FN_PINT6_PG, GPIO_FN_PINT5_PG, GPIO_FN_PINT4_PG,
+	GPIO_FN_PINT3_PG, GPIO_FN_PINT2_PG, GPIO_FN_PINT1_PG, GPIO_FN_PINT0_PG,
+	GPIO_FN_PINT7_PH, GPIO_FN_PINT6_PH, GPIO_FN_PINT5_PH, GPIO_FN_PINT4_PH,
+	GPIO_FN_PINT3_PH, GPIO_FN_PINT2_PH, GPIO_FN_PINT1_PH, GPIO_FN_PINT0_PH,
+	GPIO_FN_PINT7_PJ, GPIO_FN_PINT6_PJ, GPIO_FN_PINT5_PJ, GPIO_FN_PINT4_PJ,
+	GPIO_FN_PINT3_PJ, GPIO_FN_PINT2_PJ, GPIO_FN_PINT1_PJ, GPIO_FN_PINT0_PJ,
+
+	/* WDT */
+	GPIO_FN_WDTOVF,
+
+	/* CAN */
+	GPIO_FN_CTX1, GPIO_FN_CRX1, GPIO_FN_CTX0, GPIO_FN_CTX0_CTX1,
+	GPIO_FN_CRX0, GPIO_FN_CRX0_CRX1, GPIO_FN_CRX0_CRX1_CRX2,
+
+	/* DMAC */
+	GPIO_FN_TEND0, GPIO_FN_DACK0, GPIO_FN_DREQ0,
+	GPIO_FN_TEND1, GPIO_FN_DACK1, GPIO_FN_DREQ1,
+
+	/* ADC */
+	GPIO_FN_ADTRG,
+
+	/* BSC */
+	GPIO_FN_A25, GPIO_FN_A24,
+	GPIO_FN_A23, GPIO_FN_A22, GPIO_FN_A21, GPIO_FN_A20,
+	GPIO_FN_A19, GPIO_FN_A18, GPIO_FN_A17, GPIO_FN_A16,
+	GPIO_FN_A15, GPIO_FN_A14, GPIO_FN_A13, GPIO_FN_A12,
+	GPIO_FN_A11, GPIO_FN_A10, GPIO_FN_A9, GPIO_FN_A8,
+	GPIO_FN_A7, GPIO_FN_A6, GPIO_FN_A5, GPIO_FN_A4,
+	GPIO_FN_A3, GPIO_FN_A2, GPIO_FN_A1, GPIO_FN_A0,
+	GPIO_FN_D15, GPIO_FN_D14, GPIO_FN_D13, GPIO_FN_D12,
+	GPIO_FN_D11, GPIO_FN_D10, GPIO_FN_D9, GPIO_FN_D8,
+	GPIO_FN_D7, GPIO_FN_D6, GPIO_FN_D5, GPIO_FN_D4,
+	GPIO_FN_D3, GPIO_FN_D2, GPIO_FN_D1, GPIO_FN_D0,
+
+	GPIO_FN_BS,
+	GPIO_FN_CS4, GPIO_FN_CS3, GPIO_FN_CS2, GPIO_FN_CS1, GPIO_FN_CS0,
+	GPIO_FN_CS5CE1A,
+	GPIO_FN_CE2A, GPIO_FN_CE2B,
+	GPIO_FN_RD, GPIO_FN_RDWR,
+	GPIO_FN_WE3ICIOWRAHDQMUU, GPIO_FN_WE2ICIORDDQMUL,
+	GPIO_FN_WE1DQMUWE, GPIO_FN_WE0DQML,
+	GPIO_FN_RAS, GPIO_FN_CAS, GPIO_FN_CKE,
+	GPIO_FN_WAIT, GPIO_FN_BREQ, GPIO_FN_BACK,
+	GPIO_FN_IOIS16,
+
+	/* TMU */
+	GPIO_FN_TIOC4D, GPIO_FN_TIOC4C, GPIO_FN_TIOC4B, GPIO_FN_TIOC4A,
+	GPIO_FN_TIOC3D, GPIO_FN_TIOC3C, GPIO_FN_TIOC3B, GPIO_FN_TIOC3A,
+	GPIO_FN_TIOC2B, GPIO_FN_TIOC1B, GPIO_FN_TIOC2A, GPIO_FN_TIOC1A,
+	GPIO_FN_TIOC0D, GPIO_FN_TIOC0C, GPIO_FN_TIOC0B, GPIO_FN_TIOC0A,
+	GPIO_FN_TCLKD, GPIO_FN_TCLKC, GPIO_FN_TCLKB, GPIO_FN_TCLKA,
+
+	/* SSU */
+	GPIO_FN_SCS0_PD, GPIO_FN_SSO0_PD, GPIO_FN_SSI0_PD, GPIO_FN_SSCK0_PD,
+	GPIO_FN_SCS0_PF, GPIO_FN_SSO0_PF, GPIO_FN_SSI0_PF, GPIO_FN_SSCK0_PF,
+	GPIO_FN_SCS1_PD, GPIO_FN_SSO1_PD, GPIO_FN_SSI1_PD, GPIO_FN_SSCK1_PD,
+	GPIO_FN_SCS1_PF, GPIO_FN_SSO1_PF, GPIO_FN_SSI1_PF, GPIO_FN_SSCK1_PF,
+
+	/* SCIF */
+	GPIO_FN_SCK0, GPIO_FN_RXD0, GPIO_FN_TXD0,
+	GPIO_FN_SCK1, GPIO_FN_RXD1, GPIO_FN_TXD1, GPIO_FN_RTS1, GPIO_FN_CTS1,
+	GPIO_FN_SCK2, GPIO_FN_RXD2, GPIO_FN_TXD2,
+	GPIO_FN_SCK3, GPIO_FN_RXD3, GPIO_FN_TXD3,
+	GPIO_FN_SCK4, GPIO_FN_RXD4, GPIO_FN_TXD4,
+	GPIO_FN_SCK5, GPIO_FN_RXD5, GPIO_FN_TXD5, GPIO_FN_RTS5, GPIO_FN_CTS5,
+	GPIO_FN_SCK6, GPIO_FN_RXD6, GPIO_FN_TXD6,
+	GPIO_FN_SCK7, GPIO_FN_RXD7, GPIO_FN_TXD7, GPIO_FN_RTS7, GPIO_FN_CTS7,
+
+	/* RSPI */
+	GPIO_FN_MISO0_PJ19, GPIO_FN_MISO0_PB20,
+	GPIO_FN_MOSI0_PJ18, GPIO_FN_MOSI0_PB19,
+	GPIO_FN_SSL00_PJ17, GPIO_FN_SSL00_PB18,
+	GPIO_FN_RSPCK0_PJ16, GPIO_FN_RSPCK0_PB17,
+	GPIO_FN_RSPCK1, GPIO_FN_MOSI1,
+	GPIO_FN_MISO1, GPIO_FN_SSL10,
+
+	/* IIC3 */
+	GPIO_FN_SCL0, GPIO_FN_SCL1, GPIO_FN_SCL2,
+	GPIO_FN_SDA2, GPIO_FN_SDA1, GPIO_FN_SDA0,
+
+	/* SSI */
+	GPIO_FN_SSISCK0, GPIO_FN_SSIWS0, GPIO_FN_SSITXD0, GPIO_FN_SSIRXD0,
+	GPIO_FN_SSIWS1, GPIO_FN_SSIWS2, GPIO_FN_SSIWS3,
+	GPIO_FN_SSISCK1, GPIO_FN_SSISCK2, GPIO_FN_SSISCK3,
+	GPIO_FN_SSIDATA1, GPIO_FN_SSIDATA2, GPIO_FN_SSIDATA3,
+	GPIO_FN_AUDIO_CLK,
+	GPIO_FN_AUDIO_XOUT,
+
+	/* SIOF */
+	GPIO_FN_SIOFTXD, GPIO_FN_SIOFRXD, GPIO_FN_SIOFSYNC, GPIO_FN_SIOFSCK,
+
+	/* SPDIF */
+	GPIO_FN_SPDIF_IN,
+	GPIO_FN_SPDIF_OUT,
+
+	/* NANDFMC  */ /* NOTE Controller is not available in boot mode 0 */
+	GPIO_FN_FCE,
+	GPIO_FN_FRB,
+
+	/* VDC */
+	GPIO_FN_DV_CLK, GPIO_FN_DV_VSYNC, GPIO_FN_DV_HSYNC,
+	GPIO_FN_DV_DATA23, GPIO_FN_DV_DATA22,
+	GPIO_FN_DV_DATA21, GPIO_FN_DV_DATA20,
+	GPIO_FN_DV_DATA19, GPIO_FN_DV_DATA18,
+	GPIO_FN_DV_DATA17, GPIO_FN_DV_DATA16,
+	GPIO_FN_DV_DATA15, GPIO_FN_DV_DATA14,
+	GPIO_FN_DV_DATA13, GPIO_FN_DV_DATA12,
+	GPIO_FN_DV_DATA11, GPIO_FN_DV_DATA10,
+	GPIO_FN_DV_DATA9, GPIO_FN_DV_DATA8,
+	GPIO_FN_DV_DATA7, GPIO_FN_DV_DATA6,
+	GPIO_FN_DV_DATA5, GPIO_FN_DV_DATA4,
+	GPIO_FN_DV_DATA3, GPIO_FN_DV_DATA2,
+	GPIO_FN_DV_DATA1, GPIO_FN_DV_DATA0,
+	GPIO_FN_LCD_CLK, GPIO_FN_LCD_EXTCLK,
+	GPIO_FN_LCD_VSYNC, GPIO_FN_LCD_HSYNC, GPIO_FN_LCD_DE,
+	GPIO_FN_LCD_DATA23, GPIO_FN_LCD_DATA22,
+	GPIO_FN_LCD_DATA21, GPIO_FN_LCD_DATA20,
+	GPIO_FN_LCD_DATA19, GPIO_FN_LCD_DATA18,
+	GPIO_FN_LCD_DATA17, GPIO_FN_LCD_DATA16,
+	GPIO_FN_LCD_DATA15, GPIO_FN_LCD_DATA14,
+	GPIO_FN_LCD_DATA13, GPIO_FN_LCD_DATA12,
+	GPIO_FN_LCD_DATA11, GPIO_FN_LCD_DATA10,
+	GPIO_FN_LCD_DATA9, GPIO_FN_LCD_DATA8,
+	GPIO_FN_LCD_DATA7, GPIO_FN_LCD_DATA6,
+	GPIO_FN_LCD_DATA5, GPIO_FN_LCD_DATA4,
+	GPIO_FN_LCD_DATA3, GPIO_FN_LCD_DATA2,
+	GPIO_FN_LCD_DATA1, GPIO_FN_LCD_DATA0,
+	GPIO_FN_LCD_M_DISP,
+};
+
+#endif /* __ASM_SH7269_H__ */

arch/sh/kernel/cpu/proc.c

@@ -7,7 +7,7 @@
 static const char *cpu_name[] = {
 	[CPU_SH7201]	= "SH7201",
 	[CPU_SH7203]	= "SH7203",	[CPU_SH7263]	= "SH7263",
-	[CPU_SH7264]	= "SH7264",
+	[CPU_SH7264]	= "SH7264",	[CPU_SH7269]	= "SH7269",
 	[CPU_SH7206]	= "SH7206",	[CPU_SH7619]	= "SH7619",
 	[CPU_SH7705]	= "SH7705",	[CPU_SH7706]	= "SH7706",
 	[CPU_SH7707]	= "SH7707",	[CPU_SH7708]	= "SH7708",

arch/sh/kernel/cpu/sh2a/Makefile

@@ -13,10 +13,12 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7203)	+= setup-sh7203.o clock-sh7203.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7263)	+= setup-sh7203.o clock-sh7203.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7264)	+= setup-sh7264.o clock-sh7264.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7206)	+= setup-sh7206.o clock-sh7206.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7269)	+= setup-sh7269.o clock-sh7269.o
 obj-$(CONFIG_CPU_SUBTYPE_MXG)		+= setup-mxg.o clock-sh7206.o
 
 # Pinmux setup
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7203)	:= pinmux-sh7203.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7264)	:= pinmux-sh7264.o
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7269)	:= pinmux-sh7269.o
 
 obj-$(CONFIG_GENERIC_GPIO)	+= $(pinmux-y)

arch/sh/kernel/cpu/sh2a/clock-sh7269.c

+/*
+ * arch/sh/kernel/cpu/sh2a/clock-sh7269.c
+ *
+ * SH7269 clock framework support
+ *
+ * Copyright (C) 2012  Phil Edworthy
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <asm/clock.h>
+
+/* SH7269 registers */
+#define FRQCR		0xfffe0010
+#define STBCR3 		0xfffe0408
+#define STBCR4 		0xfffe040c
+#define STBCR5 		0xfffe0410
+#define STBCR6 		0xfffe0414
+#define STBCR7 		0xfffe0418
+
+#define PLL_RATE 20
+
+/* Fixed 32 KHz root clock for RTC */
+static struct clk r_clk = {
+	.rate           = 32768,
+};
+
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+static struct clk extal_clk = {
+	.rate		= 13340000,
+};
+
+static unsigned long pll_recalc(struct clk *clk)
+{
+	return clk->parent->rate * PLL_RATE;
+}
+
+static struct sh_clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll_clk = {
+	.ops		= &pll_clk_ops,
+	.parent		= &extal_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long peripheral0_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 8;
+}
+
+static struct sh_clk_ops peripheral0_clk_ops = {
+	.recalc		= peripheral0_recalc,
+};
+
+static struct clk peripheral0_clk = {
+	.ops		= &peripheral0_clk_ops,
+	.parent		= &pll_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+static unsigned long peripheral1_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 4;
+}
+
+static struct sh_clk_ops peripheral1_clk_ops = {
+	.recalc		= peripheral1_recalc,
+};
+
+static struct clk peripheral1_clk = {
+	.ops		= &peripheral1_clk_ops,
+	.parent		= &pll_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
+
+struct clk *main_clks[] = {
+	&r_clk,
+	&extal_clk,
+	&pll_clk,
+	&peripheral0_clk,
+	&peripheral1_clk,
+};
+
+static int div2[] = { 1, 2, 0, 4 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = div2,
+	.nr_divisors = ARRAY_SIZE(div2),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+};
+
+enum { DIV4_I, DIV4_B,
+       DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
+
+/* The mask field specifies the div2 entries that are valid */
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I]  = DIV4(FRQCR, 8, 0xB, CLK_ENABLE_REG_16BIT
+					| CLK_ENABLE_ON_INIT),
+	[DIV4_B]  = DIV4(FRQCR, 4, 0xA, CLK_ENABLE_REG_16BIT
+					| CLK_ENABLE_ON_INIT),
+};
+
+enum { MSTP72,
+	MSTP60,
+	MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40,
+	MSTP35, MSTP32, MSTP30,
+	MSTP_NR };
+
+static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP72] = SH_CLK_MSTP8(&peripheral0_clk, STBCR7, 2, 0), /* CMT */
+	[MSTP60] = SH_CLK_MSTP8(&peripheral1_clk, STBCR6, 0, 0), /* USB */
+	[MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */
+	[MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */
+	[MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */
+	[MSTP44] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 4, 0), /* SCIF3 */
+	[MSTP43] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 3, 0), /* SCIF4 */
+	[MSTP42] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 2, 0), /* SCIF5 */
+	[MSTP41] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 1, 0), /* SCIF6 */
+	[MSTP40] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 0, 0), /* SCIF7 */
+	[MSTP35] = SH_CLK_MSTP8(&peripheral0_clk, STBCR3, 5, 0), /* MTU2 */
+	[MSTP32] = SH_CLK_MSTP8(&peripheral1_clk, STBCR3, 2, 0), /* ADC */
+	[MSTP30] = SH_CLK_MSTP8(&r_clk, STBCR3, 0, 0), /* RTC */
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("rclk", &r_clk),
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+	CLKDEV_CON_ID("peripheral_clk", &peripheral1_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+	CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
+
+	/* MSTP clocks */
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP47]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP46]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP45]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.3", &mstp_clks[MSTP44]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.4", &mstp_clks[MSTP43]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]),
+	CLKDEV_CON_ID("cmt_fck", &mstp_clks[MSTP72]),
+	CLKDEV_CON_ID("usb0", &mstp_clks[MSTP60]),
+	CLKDEV_CON_ID("mtu2_fck", &mstp_clks[MSTP35]),
+	CLKDEV_CON_ID("adc0", &mstp_clks[MSTP32]),
+	CLKDEV_CON_ID("rtc0", &mstp_clks[MSTP30]),
+};
+
+int __init arch_clk_init(void)
+{
+	int k, ret = 0;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
+
+	return ret;
+}

arch/sh/kernel/cpu/sh2a/probe.c

@@ -32,6 +32,9 @@ void __cpuinit cpu_probe(void)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7264)
 	boot_cpu_data.type			= CPU_SH7264;
 	boot_cpu_data.flags			|= CPU_HAS_FPU;
+#elif defined(CONFIG_CPU_SUBTYPE_SH7269)
+	boot_cpu_data.type			= CPU_SH7269;
+	boot_cpu_data.flags			|= CPU_HAS_FPU;
 #elif defined(CONFIG_CPU_SUBTYPE_SH7206)
 	boot_cpu_data.type			= CPU_SH7206;
 	boot_cpu_data.flags			|= CPU_HAS_DSP;

arch/sh/tools/mach-types

@@ -52,6 +52,7 @@ MIGOR			SH_MIGOR
 RSK7201			SH_RSK7201
 RSK7203			SH_RSK7203
 RSK7264			SH_RSK7264
+RSK7269			SH_RSK7269
 AP325RXA		SH_AP325RXA
 SH2007			SH_SH2007
 SH7757LCR		SH_SH7757LCR

drivers/watchdog/Kconfig

@@ -1138,6 +1138,7 @@ config ZVM_WATCHDOG
 config SH_WDT
 	tristate "SuperH Watchdog"
 	depends on SUPERH && (CPU_SH3 || CPU_SH4)
+	select WATCHDOG_CORE
 	help
 	  This driver adds watchdog support for the integrated watchdog in the
 	  SuperH processors. If you have one of these processors and wish