Commit bd69baaa authored by René van Dorst's avatar René van Dorst Committed by David S. Miller

dt-bindings: net: ethernet: Update mt7622 docs and dts to reflect the new phylink API

This patch the removes the recently added mediatek,physpeed property.
Use the fixed-link property speed = <2500> to set the phy in 2.5Gbit.
See mt7622-bananapi-bpi-r64.dts for a working example.
Signed-off-by: default avatarRené van Dorst <opensource@vdorst.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 7e538372
......@@ -9,8 +9,6 @@ Required Properties:
- "mediatek,mt7622-sgmiisys", "syscon"
- "mediatek,mt7629-sgmiisys", "syscon"
- #clock-cells: Must be 1
- mediatek,physpeed: Should be one of "auto", "1000" or "2500" to match up
the capability of the target PHY.
The SGMIISYS controller uses the common clk binding from
Documentation/devicetree/bindings/clock/clock-bindings.txt
......
......@@ -115,24 +115,34 @@ &cir {
};
&eth {
pinctrl-names = "default";
pinctrl-0 = <&eth_pins>;
status = "okay";
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
gmac1: mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
phy-handle = <&phy5>;
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
mdio-bus {
mdio: mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
phy5: ethernet-phy@5 {
reg = <5>;
phy-mode = "sgmii";
};
};
};
......
......@@ -931,6 +931,5 @@ sgmiisys: sgmiisys@1b128000 {
"syscon";
reg = <0 0x1b128000 0 0x3000>;
#clock-cells = <1>;
mediatek,physpeed = "2500";
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment