crypto: ccp - Use precalculated hash from headers

Precalculated hash for empty message are now present in hash headers.
This patch just use them.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

drivers/crypto/ccp/Kconfig

@@ -3,6 +3,8 @@ config CRYPTO_DEV_CCP_DD
 	depends on CRYPTO_DEV_CCP
 	default m
 	select HW_RANDOM
+	select CRYPTO_SHA1
+	select CRYPTO_SHA256
 	help
 	  Provides the interface to use the AMD Cryptographic Coprocessor
 	  which can be used to offload encryption operations such as SHA,

drivers/crypto/ccp/ccp-ops.c

@@ -152,32 +152,6 @@ static const __be32 ccp_sha256_init[CCP_SHA_CTXSIZE / sizeof(__be32)] = {
 	cpu_to_be32(SHA256_H6), cpu_to_be32(SHA256_H7),
 };
 
-/* The CCP cannot perform zero-length sha operations so the caller
- * is required to buffer data for the final operation.  However, a
- * sha operation for a message with a total length of zero is valid
- * so known values are required to supply the result.
- */
-static const u8 ccp_sha1_zero[CCP_SHA_CTXSIZE] = {
-	0xda, 0x39, 0xa3, 0xee, 0x5e, 0x6b, 0x4b, 0x0d,
-	0x32, 0x55, 0xbf, 0xef, 0x95, 0x60, 0x18, 0x90,
-	0xaf, 0xd8, 0x07, 0x09, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-};
-
-static const u8 ccp_sha224_zero[CCP_SHA_CTXSIZE] = {
-	0xd1, 0x4a, 0x02, 0x8c, 0x2a, 0x3a, 0x2b, 0xc9,
-	0x47, 0x61, 0x02, 0xbb, 0x28, 0x82, 0x34, 0xc4,
-	0x15, 0xa2, 0xb0, 0x1f, 0x82, 0x8e, 0xa6, 0x2a,
-	0xc5, 0xb3, 0xe4, 0x2f, 0x00, 0x00, 0x00, 0x00,
-};
-
-static const u8 ccp_sha256_zero[CCP_SHA_CTXSIZE] = {
-	0xe3, 0xb0, 0xc4, 0x42, 0x98, 0xfc, 0x1c, 0x14,
-	0x9a, 0xfb, 0xf4, 0xc8, 0x99, 0x6f, 0xb9, 0x24,
-	0x27, 0xae, 0x41, 0xe4, 0x64, 0x9b, 0x93, 0x4c,
-	0xa4, 0x95, 0x99, 0x1b, 0x78, 0x52, 0xb8, 0x55,
-};
-
 static u32 ccp_addr_lo(struct ccp_dma_info *info)
 {
 	return lower_32_bits(info->address + info->offset);
@@ -1391,18 +1365,21 @@ static int ccp_run_sha_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd)
 		if (sha->msg_bits)
 			return -EINVAL;
 
-		/* A sha operation for a message with a total length of zero,
-		 * return known result.
+		/* The CCP cannot perform zero-length sha operations so the
+		 * caller is required to buffer data for the final operation.
+		 * However, a sha operation for a message with a total length
+		 * of zero is valid so known values are required to supply
+		 * the result.
 		 */
 		switch (sha->type) {
 		case CCP_SHA_TYPE_1:
-			sha_zero = ccp_sha1_zero;
+			sha_zero = sha1_zero_message_hash;
 			break;
 		case CCP_SHA_TYPE_224:
-			sha_zero = ccp_sha224_zero;
+			sha_zero = sha224_zero_message_hash;
 			break;
 		case CCP_SHA_TYPE_256:
-			sha_zero = ccp_sha256_zero;
+			sha_zero = sha256_zero_message_hash;
 			break;
 		default:
 			return -EINVAL;