Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
 "12 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  dmapool: fix overflow condition in pool_find_page()
  thermal: avoid division by zero in power allocator
  memcg: remove pcp_counter_lock
  kprobes: use _do_fork() in samples to make them work again
  drivers/input/joystick/Kconfig: zhenhua.c needs BITREVERSE
  memcg: make mem_cgroup_read_stat() unsigned
  memcg: fix dirty page migration
  dax: fix NULL pointer in __dax_pmd_fault()
  mm: hugetlbfs: skip shared VMAs when unmapping private pages to satisfy a fault
  mm/slab: fix unexpected index mapping result of kmalloc_size(INDEX_NODE+1)
  userfaultfd: remove kernel header include from uapi header
  arch/x86/include/asm/efi.h: fix build failure

arch/x86/include/asm/efi.h

@@ -86,6 +86,7 @@ extern u64 asmlinkage efi_call(void *fp, ...);
 extern void __iomem *__init efi_ioremap(unsigned long addr, unsigned long size,
 					u32 type, u64 attribute);
 
+#ifdef CONFIG_KASAN
 /*
  * CONFIG_KASAN may redefine memset to __memset.  __memset function is present
  * only in kernel binary.  Since the EFI stub linked into a separate binary it
@@ -95,6 +96,7 @@ extern void __iomem *__init efi_ioremap(unsigned long addr, unsigned long size,
 #undef memcpy
 #undef memset
 #undef memmove
+#endif
 
 #endif /* CONFIG_X86_32 */
 

drivers/input/joystick/Kconfig

@@ -196,6 +196,7 @@ config JOYSTICK_TWIDJOY
 config JOYSTICK_ZHENHUA
 	tristate "5-byte Zhenhua RC transmitter"
 	select SERIO
+	select BITREVERSE
 	help
 	  Say Y here if you have a Zhen Hua PPM-4CH transmitter which is
 	  supplied with a ready to fly micro electric indoor helicopters

drivers/thermal/power_allocator.c

@@ -144,6 +144,16 @@ static void estimate_pid_constants(struct thermal_zone_device *tz,
 		switch_on_temp = 0;
 
 	temperature_threshold = control_temp - switch_on_temp;
+	/*
+	 * estimate_pid_constants() tries to find appropriate default
+	 * values for thermal zones that don't provide them. If a
+	 * system integrator has configured a thermal zone with two
+	 * passive trip points at the same temperature, that person
+	 * hasn't put any effort to set up the thermal zone properly
+	 * so just give up.
+	 */
+	if (!temperature_threshold)
+		return;
 
 	if (!tz->tzp->k_po || force)
 		tz->tzp->k_po = int_to_frac(sustainable_power) /

fs/dax.c

@@ -569,8 +569,20 @@ int __dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 	if (!buffer_size_valid(&bh) || bh.b_size < PMD_SIZE)
 		goto fallback;
 
+	sector = bh.b_blocknr << (blkbits - 9);
+
 	if (buffer_unwritten(&bh) || buffer_new(&bh)) {
 		int i;
+
+		length = bdev_direct_access(bh.b_bdev, sector, &kaddr, &pfn,
+						bh.b_size);
+		if (length < 0) {
+			result = VM_FAULT_SIGBUS;
+			goto out;
+		}
+		if ((length < PMD_SIZE) || (pfn & PG_PMD_COLOUR))
+			goto fallback;
+
 		for (i = 0; i < PTRS_PER_PMD; i++)
 			clear_pmem(kaddr + i * PAGE_SIZE, PAGE_SIZE);
 		wmb_pmem();
@@ -623,7 +635,6 @@ int __dax_pmd_fault(struct vm_area_struct *vma, unsigned long address,
 		result = VM_FAULT_NOPAGE;
 		spin_unlock(ptl);
 	} else {
-		sector = bh.b_blocknr << (blkbits - 9);
 		length = bdev_direct_access(bh.b_bdev, sector, &kaddr, &pfn,
 						bh.b_size);
 		if (length < 0) {

include/linux/memcontrol.h

@@ -242,7 +242,6 @@ struct mem_cgroup {
 	 * percpu counter.
 	 */
 	struct mem_cgroup_stat_cpu __percpu *stat;
-	spinlock_t pcp_counter_lock;
 
 #if defined(CONFIG_MEMCG_KMEM) && defined(CONFIG_INET)
 	struct cg_proto tcp_mem;

include/linux/mm.h

@@ -905,6 +905,27 @@ static inline void set_page_links(struct page *page, enum zone_type zone,
 #endif
 }
 
+#ifdef CONFIG_MEMCG
+static inline struct mem_cgroup *page_memcg(struct page *page)
+{
+	return page->mem_cgroup;
+}
+
+static inline void set_page_memcg(struct page *page, struct mem_cgroup *memcg)
+{
+	page->mem_cgroup = memcg;
+}
+#else
+static inline struct mem_cgroup *page_memcg(struct page *page)
+{
+	return NULL;
+}
+
+static inline void set_page_memcg(struct page *page, struct mem_cgroup *memcg)
+{
+}
+#endif
+
 /*
  * Some inline functions in vmstat.h depend on page_zone()
  */

include/uapi/linux/userfaultfd.h

@@ -11,8 +11,6 @@
 
 #include <linux/types.h>
 
-#include <linux/compiler.h>
-
 #define UFFD_API ((__u64)0xAA)
 /*
  * After implementing the respective features it will become:

mm/dmapool.c

@@ -394,7 +394,7 @@ static struct dma_page *pool_find_page(struct dma_pool *pool, dma_addr_t dma)
 	list_for_each_entry(page, &pool->page_list, page_list) {
 		if (dma < page->dma)
 			continue;
-		if (dma < (page->dma + pool->allocation))
+		if ((dma - page->dma) < pool->allocation)
 			return page;
 	}
 	return NULL;

mm/hugetlb.c

@@ -3201,6 +3201,14 @@ static void unmap_ref_private(struct mm_struct *mm, struct vm_area_struct *vma,
 		if (iter_vma == vma)
 			continue;
 
+		/*
+		 * Shared VMAs have their own reserves and do not affect
+		 * MAP_PRIVATE accounting but it is possible that a shared
+		 * VMA is using the same page so check and skip such VMAs.
+		 */
+		if (iter_vma->vm_flags & VM_MAYSHARE)
+			continue;
+
 		/*
 		 * Unmap the page from other VMAs without their own reserves.
 		 * They get marked to be SIGKILLed if they fault in these

mm/memcontrol.c

@@ -644,12 +644,14 @@ mem_cgroup_largest_soft_limit_node(struct mem_cgroup_tree_per_zone *mctz)
 }
 
 /*
+ * Return page count for single (non recursive) @memcg.
+ *
  * Implementation Note: reading percpu statistics for memcg.
  *
  * Both of vmstat[] and percpu_counter has threshold and do periodic
  * synchronization to implement "quick" read. There are trade-off between
  * reading cost and precision of value. Then, we may have a chance to implement
- * a periodic synchronizion of counter in memcg's counter.
+ * a periodic synchronization of counter in memcg's counter.
  *
  * But this _read() function is used for user interface now. The user accounts
  * memory usage by memory cgroup and he _always_ requires exact value because
@@ -659,17 +661,24 @@ mem_cgroup_largest_soft_limit_node(struct mem_cgroup_tree_per_zone *mctz)
  *
  * If there are kernel internal actions which can make use of some not-exact
  * value, and reading all cpu value can be performance bottleneck in some
- * common workload, threashold and synchonization as vmstat[] should be
+ * common workload, threshold and synchronization as vmstat[] should be
  * implemented.
  */
-static long mem_cgroup_read_stat(struct mem_cgroup *memcg,
-				 enum mem_cgroup_stat_index idx)
+static unsigned long
+mem_cgroup_read_stat(struct mem_cgroup *memcg, enum mem_cgroup_stat_index idx)
 {
 	long val = 0;
 	int cpu;
 
+	/* Per-cpu values can be negative, use a signed accumulator */
 	for_each_possible_cpu(cpu)
 		val += per_cpu(memcg->stat->count[idx], cpu);
+	/*
+	 * Summing races with updates, so val may be negative.  Avoid exposing
+	 * transient negative values.
+	 */
+	if (val < 0)
+		val = 0;
 	return val;
 }
 
@@ -1254,7 +1263,7 @@ void mem_cgroup_print_oom_info(struct mem_cgroup *memcg, struct task_struct *p)
 		for (i = 0; i < MEM_CGROUP_STAT_NSTATS; i++) {
 			if (i == MEM_CGROUP_STAT_SWAP && !do_swap_account)
 				continue;
-			pr_cont(" %s:%ldKB", mem_cgroup_stat_names[i],
+			pr_cont(" %s:%luKB", mem_cgroup_stat_names[i],
 				K(mem_cgroup_read_stat(iter, i)));
 		}
 
@@ -2819,14 +2828,11 @@ static unsigned long tree_stat(struct mem_cgroup *memcg,
 			       enum mem_cgroup_stat_index idx)
 {
 	struct mem_cgroup *iter;
-	long val = 0;
+	unsigned long val = 0;
 
-	/* Per-cpu values can be negative, use a signed accumulator */
 	for_each_mem_cgroup_tree(iter, memcg)
 		val += mem_cgroup_read_stat(iter, idx);
 
-	if (val < 0) /* race ? */
-		val = 0;
 	return val;
 }
 
@@ -3169,7 +3175,7 @@ static int memcg_stat_show(struct seq_file *m, void *v)
 	for (i = 0; i < MEM_CGROUP_STAT_NSTATS; i++) {
 		if (i == MEM_CGROUP_STAT_SWAP && !do_swap_account)
 			continue;
-		seq_printf(m, "%s %ld\n", mem_cgroup_stat_names[i],
+		seq_printf(m, "%s %lu\n", mem_cgroup_stat_names[i],
 			   mem_cgroup_read_stat(memcg, i) * PAGE_SIZE);
 	}
 
@@ -3194,13 +3200,13 @@ static int memcg_stat_show(struct seq_file *m, void *v)
 			   (u64)memsw * PAGE_SIZE);
 
 	for (i = 0; i < MEM_CGROUP_STAT_NSTATS; i++) {
-		long long val = 0;
+		unsigned long long val = 0;
 
 		if (i == MEM_CGROUP_STAT_SWAP && !do_swap_account)
 			continue;
 		for_each_mem_cgroup_tree(mi, memcg)
 			val += mem_cgroup_read_stat(mi, i) * PAGE_SIZE;
-		seq_printf(m, "total_%s %lld\n", mem_cgroup_stat_names[i], val);
+		seq_printf(m, "total_%s %llu\n", mem_cgroup_stat_names[i], val);
 	}
 
 	for (i = 0; i < MEM_CGROUP_EVENTS_NSTATS; i++) {
@@ -4179,7 +4185,6 @@ static struct mem_cgroup *mem_cgroup_alloc(void)
 	if (memcg_wb_domain_init(memcg, GFP_KERNEL))
 		goto out_free_stat;
 
-	spin_lock_init(&memcg->pcp_counter_lock);
 	return memcg;
 
 out_free_stat:

mm/migrate.c

@@ -740,6 +740,15 @@ static int move_to_new_page(struct page *newpage, struct page *page,
 	if (PageSwapBacked(page))
 		SetPageSwapBacked(newpage);
 
+	/*
+	 * Indirectly called below, migrate_page_copy() copies PG_dirty and thus
+	 * needs newpage's memcg set to transfer memcg dirty page accounting.
+	 * So perform memcg migration in two steps:
+	 * 1. set newpage->mem_cgroup (here)
+	 * 2. clear page->mem_cgroup (below)
+	 */
+	set_page_memcg(newpage, page_memcg(page));
+
 	mapping = page_mapping(page);
 	if (!mapping)
 		rc = migrate_page(mapping, newpage, page, mode);
@@ -756,9 +765,10 @@ static int move_to_new_page(struct page *newpage, struct page *page,
 		rc = fallback_migrate_page(mapping, newpage, page, mode);
 
 	if (rc != MIGRATEPAGE_SUCCESS) {
+		set_page_memcg(newpage, NULL);
 		newpage->mapping = NULL;
 	} else {
-		mem_cgroup_migrate(page, newpage, false);
+		set_page_memcg(page, NULL);
 		if (page_was_mapped)
 			remove_migration_ptes(page, newpage);
 		page->mapping = NULL;

mm/slab.c

@@ -2190,9 +2190,16 @@ __kmem_cache_create (struct kmem_cache *cachep, unsigned long flags)
 			size += BYTES_PER_WORD;
 	}
 #if FORCED_DEBUG && defined(CONFIG_DEBUG_PAGEALLOC)
-	if (size >= kmalloc_size(INDEX_NODE + 1)
-	    && cachep->object_size > cache_line_size()
-	    && ALIGN(size, cachep->align) < PAGE_SIZE) {
+	/*
+	 * To activate debug pagealloc, off-slab management is necessary
+	 * requirement. In early phase of initialization, small sized slab
+	 * doesn't get initialized so it would not be possible. So, we need
+	 * to check size >= 256. It guarantees that all necessary small
+	 * sized slab is initialized in current slab initialization sequence.
+	 */
+	if (!slab_early_init && size >= kmalloc_size(INDEX_NODE) &&
+		size >= 256 && cachep->object_size > cache_line_size() &&
+		ALIGN(size, cachep->align) < PAGE_SIZE) {
 		cachep->obj_offset += PAGE_SIZE - ALIGN(size, cachep->align);
 		size = PAGE_SIZE;
 	}

samples/kprobes/jprobe_example.c

 /*
  * Here's a sample kernel module showing the use of jprobes to dump
- * the arguments of do_fork().
+ * the arguments of _do_fork().
  *
  * For more information on theory of operation of jprobes, see
  * Documentation/kprobes.txt
  *
  * Build and insert the kernel module as done in the kprobe example.
  * You will see the trace data in /var/log/messages and on the
- * console whenever do_fork() is invoked to create a new process.
+ * console whenever _do_fork() is invoked to create a new process.
  * (Some messages may be suppressed if syslogd is configured to
  * eliminate duplicate messages.)
  */
@@ -17,13 +17,13 @@
 #include <linux/kprobes.h>
 
 /*
- * Jumper probe for do_fork.
+ * Jumper probe for _do_fork.
  * Mirror principle enables access to arguments of the probed routine
  * from the probe handler.
  */
 
-/* Proxy routine having the same arguments as actual do_fork() routine */
-static long jdo_fork(unsigned long clone_flags, unsigned long stack_start,
+/* Proxy routine having the same arguments as actual _do_fork() routine */
+static long j_do_fork(unsigned long clone_flags, unsigned long stack_start,
 	      unsigned long stack_size, int __user *parent_tidptr,
 	      int __user *child_tidptr)
 {
@@ -36,9 +36,9 @@ static long jdo_fork(unsigned long clone_flags, unsigned long stack_start,
 }
 
 static struct jprobe my_jprobe = {
-	.entry			= jdo_fork,
+	.entry			= j_do_fork,
 	.kp = {
-		.symbol_name	= "do_fork",
+		.symbol_name	= "_do_fork",
 	},
 };
 

samples/kprobes/kprobe_example.c

 /*
  * NOTE: This example is works on x86 and powerpc.
  * Here's a sample kernel module showing the use of kprobes to dump a
- * stack trace and selected registers when do_fork() is called.
+ * stack trace and selected registers when _do_fork() is called.
  *
  * For more information on theory of operation of kprobes, see
  * Documentation/kprobes.txt
  *
  * You will see the trace data in /var/log/messages and on the console
- * whenever do_fork() is invoked to create a new process.
+ * whenever _do_fork() is invoked to create a new process.
  */
 
 #include <linux/kernel.h>
@@ -16,7 +16,7 @@
 
 /* For each probe you need to allocate a kprobe structure */
 static struct kprobe kp = {
-	.symbol_name	= "do_fork",
+	.symbol_name	= "_do_fork",
 };
 
 /* kprobe pre_handler: called just before the probed instruction is executed */

samples/kprobes/kretprobe_example.c

@@ -7,7 +7,7 @@
  *
  * usage: insmod kretprobe_example.ko func=<func_name>
  *
- * If no func_name is specified, do_fork is instrumented
+ * If no func_name is specified, _do_fork is instrumented
  *
  * For more information on theory of operation of kretprobes, see
  * Documentation/kprobes.txt
@@ -25,7 +25,7 @@
 #include <linux/limits.h>
 #include <linux/sched.h>
 
-static char func_name[NAME_MAX] = "do_fork";
+static char func_name[NAME_MAX] = "_do_fork";
 module_param_string(func, func_name, NAME_MAX, S_IRUGO);
 MODULE_PARM_DESC(func, "Function to kretprobe; this module will report the"
 			" function's execution time");