Merge tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC low-priority fixes from Olof Johansson:
 "A set of fixes for various platforms that weren't considered bad
  enough to include in 3.12 (nor -stable).  Mostly simple typo fixes,
  etc"

* tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP2+: irq, AM33XX add missing register check
  ARM: OMAP2+: wakeupgen: AM43x adaptation
  ARM: OMAP1: Fix a bunch of GPIO related section warnings after initdata got corrected
  ARM: dts: fix PL330 MDMA1 address in DT for Universal C210 board
  ARM: dts: Work around lack of cpufreq regulator lookup for exynos4210-origen and trats boards
  ARM: dts: Fix typo earlyprintk in exynos5440-sd5v1 and ssdk5440 boards
  ARM: dts: Correct typo in use of samsung,pin-drv for exynos5250
  ARM: rockchip: remove obsolete rockchip,config properties
  ARM: rockchip: fix wrong use of non-existent CONFIG_LOCAL_TIMERS
  ARM: mach-omap1: Fix omap1510_fpga_init_irq() implicit declarations.
  ARM: OMAP1: fix incorrect placement of __initdata tag
  ARM: OMAP: remove deprecated IRQF_DISABLED
  ARM: OMAP2+: throw the die id into the entropy pool

arch/arm/boot/dts/exynos4210-origen.dts

@@ -192,7 +192,12 @@ ldo21_reg: LDO21 {
 				};
 
 				buck1_reg: BUCK1 {
-					regulator-name = "VDD_ARM_1.2V";
+					/*
+					* HACK: The real name is VDD_ARM_1.2V,
+					* but exynos-cpufreq does not support
+					* DT-based regulator lookup yet.
+					*/
+					regulator-name = "vdd_arm";
 					regulator-min-microvolt = <950000>;
 					regulator-max-microvolt	= <1350000>;
 					regulator-always-on;

arch/arm/boot/dts/exynos4210-trats.dts

@@ -290,7 +290,12 @@ vddq_reg: LDO21 {
 				};
 
 				varm_breg: BUCK1 {
-				     regulator-name = "VARM_1.2V_C210";
+				     /*
+				      * HACK: The real name is VARM_1.2V_C210,
+				      * but exynos-cpufreq does not support
+				      * DT-based regulator lookup yet.
+				      */
+				     regulator-name = "vdd_arm";
 				     regulator-min-microvolt = <900000>;
 				     regulator-max-microvolt = <1350000>;
 				     regulator-always-on;

arch/arm/boot/dts/exynos4210-universal_c210.dts

@@ -350,3 +350,7 @@ pwm@139D0000 {
 		status = "okay";
 	};
 };
+
+&mdma1 {
+	reg = <0x12840000 0x1000>;
+};

arch/arm/boot/dts/exynos5250-pinctrl.dtsi

@@ -210,21 +210,21 @@ uart0_fctl: uart0-fctl {
 			samsung,pins = "gpa0-2", "gpa0-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c2_bus: i2c2-bus {
 			samsung,pins = "gpa0-6", "gpa0-7";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c2_hs_bus: i2c2-hs-bus {
 			samsung,pins = "gpa0-6", "gpa0-7";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		uart2_data: uart2-data {
@@ -238,21 +238,21 @@ uart2_fctl: uart2-fctl {
 			samsung,pins = "gpa1-2", "gpa1-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c3_bus: i2c3-bus {
 			samsung,pins = "gpa1-2", "gpa1-3";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c3_hs_bus: i2c3-hs-bus {
 			samsung,pins = "gpa1-2", "gpa1-3";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		uart3_data: uart3-data {
@@ -273,14 +273,14 @@ i2c4_bus: i2c4-bus {
 			samsung,pins = "gpa2-0", "gpa2-1";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c5_bus: i2c5-bus {
 			samsung,pins = "gpa2-2", "gpa2-3";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		spi1_bus: spi1-bus {
@@ -376,14 +376,14 @@ i2c0_hs_bus: i2c0-hs-bus {
 			samsung,pins = "gpb3-0", "gpb3-1";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		i2c1_hs_bus: i2c1-hs-bus {
 			samsung,pins = "gpb3-2", "gpb3-3";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		sd0_clk: sd0-clk {
@@ -551,14 +551,14 @@ uart1_fctl: uart1-fctl {
 			samsung,pins = "gpd0-2", "gpd0-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		dp_hpd: dp_hpd {
 			samsung,pins = "gpx0-7";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 	};
 
@@ -649,42 +649,42 @@ cam_gpio_b: cam-gpio-b {
 				       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_i2c2_bus: cam-i2c2-bus {
 			samsung,pins = "gpe0-6", "gpe1-0";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_spi1_bus: cam-spi1-bus {
 			samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
 			samsung,pin-function = <4>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_i2c1_bus: cam-i2c1-bus {
 			samsung,pins = "gpf0-2", "gpf0-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_i2c0_bus: cam-i2c0-bus {
 			samsung,pins = "gpf0-0", "gpf0-1";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_spi0_bus: cam-spi0-bus {
 			samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_bayrgb_bus: cam-bayrgb-bus {
@@ -695,7 +695,7 @@ cam_bayrgb_bus: cam-bayrgb-bus {
 				       "gpg2-0", "gpg2-1";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		cam_port_a: cam-port-a {
@@ -704,7 +704,7 @@ cam_port_a: cam-port-a {
 				       "gph1-4", "gph1-5", "gph1-6", "gph1-7";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 	};
 
@@ -756,7 +756,7 @@ c2c_rxd: c2c-rxd {
 				       "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 
 		c2c_txd: c2c-txd {
@@ -766,7 +766,7 @@ c2c_txd: c2c-txd {
 				       "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samaung,pin-drv = <0>;
+			samsung,pin-drv = <0>;
 		};
 	};
 

arch/arm/boot/dts/exynos5440-sd5v1.dts

@@ -17,7 +17,7 @@ / {
 	compatible = "samsung,sd5v1", "samsung,exynos5440";
 
 	chosen {
-		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
+		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
 	};
 
 	fixed-rate-clocks {

arch/arm/boot/dts/exynos5440-ssdk5440.dts

@@ -17,7 +17,7 @@ / {
 	compatible = "samsung,ssdk5440", "samsung,exynos5440";
 
 	chosen {
-		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
+		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
 	};
 
 	spi_0: spi@D0000 {

arch/arm/boot/dts/rk3066a.dtsi

@@ -191,17 +191,14 @@ uart0 {
 				uart0_xfer: uart0-xfer {
 					rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart0_cts: uart0-cts {
 					rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart0_rts: uart0-rts {
 					rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 
@@ -209,17 +206,14 @@ uart1 {
 				uart1_xfer: uart1-xfer {
 					rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart1_cts: uart1-cts {
 					rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart1_rts: uart1-rts {
 					rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 
@@ -227,7 +221,6 @@ uart2 {
 				uart2_xfer: uart2-xfer {
 					rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 				/* no rts / cts for uart2 */
 			};
@@ -236,44 +229,36 @@ uart3 {
 				uart3_xfer: uart3-xfer {
 					rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart3_cts: uart3-cts {
 					rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				uart3_rts: uart3-rts {
 					rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 
 			sd0 {
 				sd0_clk: sd0-clk {
 					rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_cmd: sd0-cmd {
 					rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_cd: sd0-cd {
 					rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_wp: sd0-wp {
 					rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_bus1: sd0-bus-width1 {
 					rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd0_bus4: sd0-bus-width4 {
@@ -281,34 +266,28 @@ sd0_bus4: sd0-bus-width4 {
 							<RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 
 			sd1 {
 				sd1_clk: sd1-clk {
 					rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_cmd: sd1-cmd {
 					rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_cd: sd1-cd {
 					rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_wp: sd1-wp {
 					rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_bus1: sd1-bus-width1 {
 					rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 
 				sd1_bus4: sd1-bus-width4 {
@@ -316,7 +295,6 @@ sd1_bus4: sd1-bus-width4 {
 							<RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>,
 							<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
-					rockchip,config = <&pcfg_pull_default>;
 				};
 			};
 		};

arch/arm/mach-omap1/common.h

@@ -46,6 +46,9 @@ static inline void omap7xx_map_io(void)
 void omap1510_fpga_init_irq(void);
 void omap15xx_map_io(void);
 #else
+static inline void omap1510_fpga_init_irq(void)
+{
+}
 static inline void omap15xx_map_io(void)
 {
 }

arch/arm/mach-omap1/fpga.c

@@ -135,8 +135,7 @@ static struct irq_chip omap_fpga_irq = {
  * mask_ack routine for all of the FPGA interrupts has been changed from
  * fpga_mask_ack_irq() to fpga_ack_irq() so that the specific FPGA interrupt
  * being serviced is left unmasked.  We can do this because the FPGA cascade
- * interrupt is installed with the IRQF_DISABLED flag, which leaves all
- * interrupts masked at the CPU while an FPGA interrupt handler executes.
+ * interrupt is run with all interrupts masked.
  *
  * Limited testing indicates that this workaround appears to be effective
  * for the smc9194 Ethernet driver used on the Innovator.  It should work

arch/arm/mach-omap1/gpio15xx.c

@@ -25,7 +25,7 @@
 #define OMAP1510_GPIO_BASE		0xFFFCE000
 
 /* gpio1 */
-static struct __initdata resource omap15xx_mpu_gpio_resources[] = {
+static struct resource omap15xx_mpu_gpio_resources[] = {
 	{
 		.start	= OMAP1_MPUIO_VBASE,
 		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
@@ -48,7 +48,7 @@ static struct omap_gpio_reg_offs omap15xx_mpuio_regs = {
 	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE,
 };
 
-static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
+static struct omap_gpio_platform_data omap15xx_mpu_gpio_config = {
 	.is_mpuio		= true,
 	.bank_width		= 16,
 	.bank_stride		= 1,
@@ -66,7 +66,7 @@ static struct platform_device omap15xx_mpu_gpio = {
 };
 
 /* gpio2 */
-static struct __initdata resource omap15xx_gpio_resources[] = {
+static struct resource omap15xx_gpio_resources[] = {
 	{
 		.start	= OMAP1510_GPIO_BASE,
 		.end	= OMAP1510_GPIO_BASE + SZ_2K - 1,
@@ -90,7 +90,7 @@ static struct omap_gpio_reg_offs omap15xx_gpio_regs = {
 	.pinctrl	= OMAP1510_GPIO_PIN_CONTROL,
 };
 
-static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
+static struct omap_gpio_platform_data omap15xx_gpio_config = {
 	.bank_width		= 16,
 	.regs                   = &omap15xx_gpio_regs,
 };

arch/arm/mach-omap1/gpio16xx.c

@@ -31,7 +31,7 @@
 #define SYSCONFIG_WORD			0x14
 
 /* mpu gpio */
-static struct __initdata resource omap16xx_mpu_gpio_resources[] = {
+static struct resource omap16xx_mpu_gpio_resources[] = {
 	{
 		.start	= OMAP1_MPUIO_VBASE,
 		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
@@ -54,7 +54,7 @@ static struct omap_gpio_reg_offs omap16xx_mpuio_regs = {
 	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE,
 };
 
-static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
+static struct omap_gpio_platform_data omap16xx_mpu_gpio_config = {
 	.is_mpuio		= true,
 	.bank_width		= 16,
 	.bank_stride		= 1,
@@ -72,7 +72,7 @@ static struct platform_device omap16xx_mpu_gpio = {
 };
 
 /* gpio1 */
-static struct __initdata resource omap16xx_gpio1_resources[] = {
+static struct resource omap16xx_gpio1_resources[] = {
 	{
 		.start	= OMAP1610_GPIO1_BASE,
 		.end	= OMAP1610_GPIO1_BASE + SZ_2K - 1,
@@ -100,7 +100,7 @@ static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
 	.edgectrl2	= OMAP1610_GPIO_EDGE_CTRL2,
 };
 
-static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
+static struct omap_gpio_platform_data omap16xx_gpio1_config = {
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -116,7 +116,7 @@ static struct platform_device omap16xx_gpio1 = {
 };
 
 /* gpio2 */
-static struct __initdata resource omap16xx_gpio2_resources[] = {
+static struct resource omap16xx_gpio2_resources[] = {
 	{
 		.start	= OMAP1610_GPIO2_BASE,
 		.end	= OMAP1610_GPIO2_BASE + SZ_2K - 1,
@@ -128,7 +128,7 @@ static struct __initdata resource omap16xx_gpio2_resources[] = {
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = {
+static struct omap_gpio_platform_data omap16xx_gpio2_config = {
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -144,7 +144,7 @@ static struct platform_device omap16xx_gpio2 = {
 };
 
 /* gpio3 */
-static struct __initdata resource omap16xx_gpio3_resources[] = {
+static struct resource omap16xx_gpio3_resources[] = {
 	{
 		.start	= OMAP1610_GPIO3_BASE,
 		.end	= OMAP1610_GPIO3_BASE + SZ_2K - 1,
@@ -156,7 +156,7 @@ static struct __initdata resource omap16xx_gpio3_resources[] = {
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = {
+static struct omap_gpio_platform_data omap16xx_gpio3_config = {
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -172,7 +172,7 @@ static struct platform_device omap16xx_gpio3 = {
 };
 
 /* gpio4 */
-static struct __initdata resource omap16xx_gpio4_resources[] = {
+static struct resource omap16xx_gpio4_resources[] = {
 	{
 		.start	= OMAP1610_GPIO4_BASE,
 		.end	= OMAP1610_GPIO4_BASE + SZ_2K - 1,
@@ -184,7 +184,7 @@ static struct __initdata resource omap16xx_gpio4_resources[] = {
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = {
+static struct omap_gpio_platform_data omap16xx_gpio4_config = {
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -199,7 +199,7 @@ static struct platform_device omap16xx_gpio4 = {
 	.resource = omap16xx_gpio4_resources,
 };
 
-static struct __initdata platform_device * omap16xx_gpio_dev[] = {
+static struct platform_device *omap16xx_gpio_dev[] __initdata = {
 	&omap16xx_mpu_gpio,
 	&omap16xx_gpio1,
 	&omap16xx_gpio2,

arch/arm/mach-omap1/gpio7xx.c

@@ -30,7 +30,7 @@
 #define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
 
 /* mpu gpio */
-static struct __initdata resource omap7xx_mpu_gpio_resources[] = {
+static struct resource omap7xx_mpu_gpio_resources[] = {
 	{
 		.start	= OMAP1_MPUIO_VBASE,
 		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
@@ -53,7 +53,7 @@ static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
 	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE >> 1,
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
+static struct omap_gpio_platform_data omap7xx_mpu_gpio_config = {
 	.is_mpuio		= true,
 	.bank_width		= 16,
 	.bank_stride		= 2,
@@ -71,7 +71,7 @@ static struct platform_device omap7xx_mpu_gpio = {
 };
 
 /* gpio1 */
-static struct __initdata resource omap7xx_gpio1_resources[] = {
+static struct resource omap7xx_gpio1_resources[] = {
 	{
 		.start	= OMAP7XX_GPIO1_BASE,
 		.end	= OMAP7XX_GPIO1_BASE + SZ_2K - 1,
@@ -94,7 +94,7 @@ static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
 	.irqctrl	= OMAP7XX_GPIO_INT_CONTROL,
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
+static struct omap_gpio_platform_data omap7xx_gpio1_config = {
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -110,7 +110,7 @@ static struct platform_device omap7xx_gpio1 = {
 };
 
 /* gpio2 */
-static struct __initdata resource omap7xx_gpio2_resources[] = {
+static struct resource omap7xx_gpio2_resources[] = {
 	{
 		.start	= OMAP7XX_GPIO2_BASE,
 		.end	= OMAP7XX_GPIO2_BASE + SZ_2K - 1,
@@ -122,7 +122,7 @@ static struct __initdata resource omap7xx_gpio2_resources[] = {
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
+static struct omap_gpio_platform_data omap7xx_gpio2_config = {
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -138,7 +138,7 @@ static struct platform_device omap7xx_gpio2 = {
 };
 
 /* gpio3 */
-static struct __initdata resource omap7xx_gpio3_resources[] = {
+static struct resource omap7xx_gpio3_resources[] = {
 	{
 		.start	= OMAP7XX_GPIO3_BASE,
 		.end	= OMAP7XX_GPIO3_BASE + SZ_2K - 1,
@@ -150,7 +150,7 @@ static struct __initdata resource omap7xx_gpio3_resources[] = {
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
+static struct omap_gpio_platform_data omap7xx_gpio3_config = {
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -166,7 +166,7 @@ static struct platform_device omap7xx_gpio3 = {
 };
 
 /* gpio4 */
-static struct __initdata resource omap7xx_gpio4_resources[] = {
+static struct resource omap7xx_gpio4_resources[] = {
 	{
 		.start	= OMAP7XX_GPIO4_BASE,
 		.end	= OMAP7XX_GPIO4_BASE + SZ_2K - 1,
@@ -178,7 +178,7 @@ static struct __initdata resource omap7xx_gpio4_resources[] = {
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
+static struct omap_gpio_platform_data omap7xx_gpio4_config = {
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -194,7 +194,7 @@ static struct platform_device omap7xx_gpio4 = {
 };
 
 /* gpio5 */
-static struct __initdata resource omap7xx_gpio5_resources[] = {
+static struct resource omap7xx_gpio5_resources[] = {
 	{
 		.start	= OMAP7XX_GPIO5_BASE,
 		.end	= OMAP7XX_GPIO5_BASE + SZ_2K - 1,
@@ -206,7 +206,7 @@ static struct __initdata resource omap7xx_gpio5_resources[] = {
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
+static struct omap_gpio_platform_data omap7xx_gpio5_config = {
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -222,7 +222,7 @@ static struct platform_device omap7xx_gpio5 = {
 };
 
 /* gpio6 */
-static struct __initdata resource omap7xx_gpio6_resources[] = {
+static struct resource omap7xx_gpio6_resources[] = {
 	{
 		.start	= OMAP7XX_GPIO6_BASE,
 		.end	= OMAP7XX_GPIO6_BASE + SZ_2K - 1,
@@ -234,7 +234,7 @@ static struct __initdata resource omap7xx_gpio6_resources[] = {
 	},
 };
 
-static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
+static struct omap_gpio_platform_data omap7xx_gpio6_config = {
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -249,7 +249,7 @@ static struct platform_device omap7xx_gpio6 = {
 	.resource = omap7xx_gpio6_resources,
 };
 
-static struct __initdata platform_device * omap7xx_gpio_dev[] = {
+static struct platform_device *omap7xx_gpio_dev[] __initdata = {
 	&omap7xx_mpu_gpio,
 	&omap7xx_gpio1,
 	&omap7xx_gpio2,

arch/arm/mach-omap1/pm.c

@@ -628,7 +628,6 @@ static irqreturn_t omap_wakeup_interrupt(int irq, void *dev)
 
 static struct irqaction omap_wakeup_irq = {
 	.name		= "peripheral wakeup",
-	.flags		= IRQF_DISABLED,
 	.handler	= omap_wakeup_interrupt
 };
 

arch/arm/mach-omap1/time.c

@@ -160,7 +160,7 @@ static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
 
 static struct irqaction omap_mpu_timer1_irq = {
 	.name		= "mpu_timer1",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= omap_mpu_timer1_interrupt,
 };
 

arch/arm/mach-omap1/timer32k.c

@@ -156,7 +156,7 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction omap_32k_timer_irq = {
 	.name		= "32KHz timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= omap_32k_timer_interrupt,
 };
 

arch/arm/mach-omap2/id.c

@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/random.h>
 #include <linux/slab.h>
 
 #ifdef CONFIG_SOC_BUS
@@ -130,6 +131,17 @@ void omap_get_die_id(struct omap_die_id *odi)
 	odi->id_3 = read_tap_reg(OMAP_TAP_DIE_ID_3);
 }
 
+static int __init omap_feed_randpool(void)
+{
+	struct omap_die_id odi;
+
+	/* Throw the die ID into the entropy pool at boot */
+	omap_get_die_id(&odi);
+	add_device_randomness(&odi, sizeof(odi));
+	return 0;
+}
+omap_device_initcall(omap_feed_randpool);
+
 void __init omap2xxx_check_revision(void)
 {
 	int i, j;

arch/arm/mach-omap2/irq.c

@@ -233,7 +233,7 @@ static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs
 			goto out;
 
 		irqnr = readl_relaxed(base_addr + 0xd8);
-#ifdef CONFIG_SOC_TI81XX
+#if IS_ENABLED(CONFIG_SOC_TI81XX) || IS_ENABLED(CONFIG_SOC_AM33XX)
 		if (irqnr)
 			goto out;
 		irqnr = readl_relaxed(base_addr + 0xf8);

arch/arm/mach-omap2/omap-wakeupgen.c

@@ -33,8 +33,12 @@
 #include "omap4-sar-layout.h"
 #include "common.h"
 
-#define MAX_NR_REG_BANKS	5
-#define MAX_IRQS		160
+#define AM43XX_NR_REG_BANKS	7
+#define AM43XX_IRQS		224
+#define MAX_NR_REG_BANKS	AM43XX_NR_REG_BANKS
+#define MAX_IRQS		AM43XX_IRQS
+#define DEFAULT_NR_REG_BANKS	5
+#define DEFAULT_IRQS		160
 #define WKG_MASK_ALL		0x00000000
 #define WKG_UNMASK_ALL		0xffffffff
 #define CPU_ENA_OFFSET		0x400
@@ -47,8 +51,8 @@ static void __iomem *wakeupgen_base;
 static void __iomem *sar_base;
 static DEFINE_RAW_SPINLOCK(wakeupgen_lock);
 static unsigned int irq_target_cpu[MAX_IRQS];
-static unsigned int irq_banks = MAX_NR_REG_BANKS;
-static unsigned int max_irqs = MAX_IRQS;
+static unsigned int irq_banks = DEFAULT_NR_REG_BANKS;
+static unsigned int max_irqs = DEFAULT_IRQS;
 static unsigned int omap_secure_apis;
 
 /*
@@ -418,11 +422,15 @@ int __init omap_wakeupgen_init(void)
 		irq_banks = OMAP4_NR_BANKS;
 		max_irqs = OMAP4_NR_IRQS;
 		omap_secure_apis = 1;
+	} else if (soc_is_am43xx()) {
+		irq_banks = AM43XX_NR_REG_BANKS;
+		max_irqs = AM43XX_IRQS;
 	}
 
 	/* Clear all IRQ bitmasks at wakeupGen level */
 	for (i = 0; i < irq_banks; i++) {
 		wakeupgen_writel(0, i, CPU0_ID);
+		if (!soc_is_am43xx())
 			wakeupgen_writel(0, i, CPU1_ID);
 	}
 

arch/arm/mach-omap2/timer.c

@@ -78,7 +78,7 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction omap2_gp_timer_irq = {
 	.name		= "gp_timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= omap2_gp_timer_interrupt,
 };
 

arch/arm/mach-rockchip/Kconfig

@@ -5,9 +5,8 @@ config ARCH_ROCKCHIP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_GIC
 	select CACHE_L2X0
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
-	select LOCAL_TIMERS if SMP
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select DW_APB_TIMER_OF

arch/arm/plat-omap/dma.c

@@ -1965,7 +1965,6 @@ static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
 static struct irqaction omap24xx_dma_irq = {
 	.name = "DMA",
 	.handler = omap2_dma_irq_handler,
-	.flags = IRQF_DISABLED
 };
 
 #else