Merge tag 'hwmon-for-linus-v4.18' of...

Merge tag 'hwmon-for-linus-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - asus_atk0110 driver modified to use new API

 - k10temp supports new CPUs and reports both Tctl and Tdie

 - minor fixes in gpio-fan, ltc2990, fschmd, and mc13783 drivers

* tag 'hwmon-for-linus-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (asus_atk0110) Make use of device managed memory
  hwmon: (asus_atk0110) Replace deprecated device register call
  hwmon: (k10temp) Make function get_raw_temp static
  hwmon: (gpio-fan) Fix "#cooling-cells" property name in bindings
  MAINTAINERS: hwmon: Add Documentation/devicetree/bindings/hwmon
  hwmon: (ltc2990) support all measurement modes
  hwmon: (ltc2990) add devicetree binding
  hwmon: (ltc2990) Fix incorrect conversion of negative temperatures
  hwmon: (core) check parent dev != NULL when chip != NULL
  hwmon: (fschmd) fix typo 'can by' to 'can be'
  hwmon: (k10temp) Display both Tctl and Tdie
  hwmon: (k10temp) Add support for Stoney Ridge and Bristol Ridge CPUs
  hwmon: MC13783: Add uid and die temperature sensor inputs

Documentation/devicetree/bindings/hwmon/gpio-fan.txt

@@ -11,7 +11,7 @@ Optional properties:
   must have the RPM values in ascending order.
 - alarm-gpios: This pin going active indicates something is wrong with
   the fan, and a udev event will be fired.
-- cooling-cells: If used as a cooling device, must be <2>
+- #cooling-cells: If used as a cooling device, must be <2>
   Also see: Documentation/devicetree/bindings/thermal/thermal.txt
   min and max states are derived from the speed-map of the fan.
 

Documentation/devicetree/bindings/hwmon/ltc2990.txt

+ltc2990: Linear Technology LTC2990 power monitor
+
+Required properties:
+- compatible: Must be "lltc,ltc2990"
+- reg: I2C slave address
+- lltc,meas-mode:
+	An array of two integers for configuring the chip measurement mode.
+
+	The first integer defines the bits 2..0 in the control register. In all
+	cases the internal temperature and supply voltage are measured. In
+	addition the following input measurements are enabled per mode:
+
+		0: V1, V2, TR2
+		1: V1-V2, TR2
+		2: V1-V2, V3, V4
+		3: TR1, V3, V4
+		4: TR1, V3-V4
+		5: TR1, TR2
+		6: V1-V2, V3-V4
+		7: V1, V2, V3, V4
+
+	The second integer defines the bits 4..3 in the control register. This
+	allows a subset of the measurements to be enabled:
+
+		0: Internal temperature and supply voltage only
+		1: TR1, V1 or V1-V2 only per mode
+		2: TR2, V3 or V3-V4 only per mode
+		3: All measurements per mode
+
+Example:
+
+ltc2990@4c {
+	compatible = "lltc,ltc2990";
+	reg = <0x4c>;
+	lltc,meas-mode = <7 3>;	/* V1, V2, V3, V4 */
+};

Documentation/hwmon/hwmon-kernel-api.txt

@@ -71,7 +71,8 @@ hwmon_device_register_with_info is the most comprehensive and preferred means
 to register a hardware monitoring device. It creates the standard sysfs
 attributes in the hardware monitoring core, letting the driver focus on reading
 from and writing to the chip instead of having to bother with sysfs attributes.
-Its parameters are described in more detail below.
+The parent device parameter cannot be NULL with non-NULL chip info. Its
+parameters are described in more detail below.
 
 devm_hwmon_device_register_with_info is similar to
 hwmon_device_register_with_info. However, it is device managed, meaning the

Documentation/hwmon/ltc2990

@@ -8,6 +8,7 @@ Supported chips:
     Datasheet: http://www.linear.com/product/ltc2990
 
 Author: Mike Looijmans <mike.looijmans@topic.nl>
+        Tom Levens <tom.levens@cern.ch>
 
 
 Description
@@ -16,10 +17,8 @@ Description
 LTC2990 is a Quad I2C Voltage, Current and Temperature Monitor.
 The chip's inputs can measure 4 voltages, or two inputs together (1+2 and 3+4)
 can be combined to measure a differential voltage, which is typically used to
-measure current through a series resistor, or a temperature.
-
-This driver currently uses the 2x differential mode only. In order to support
-other modes, the driver will need to be expanded.
+measure current through a series resistor, or a temperature with an external
+diode.
 
 
 Usage Notes
@@ -32,12 +31,19 @@ devices explicitly.
 Sysfs attributes
 ----------------
 
+in0_input     Voltage at Vcc pin in millivolt (range 2.5V to 5V)
+temp1_input   Internal chip temperature in millidegrees Celcius
+
+A subset of the following attributes are visible, depending on the measurement
+mode of the chip.
+
+in[1-4]_input Voltage at V[1-4] pin in millivolt
+temp2_input   External temperature sensor TR1 in millidegrees Celcius
+temp3_input   External temperature sensor TR2 in millidegrees Celcius
+curr1_input   Current in mA across V1-V2 assuming a 1mOhm sense resistor
+curr2_input   Current in mA across V3-V4 assuming a 1mOhm sense resistor
+
 The "curr*_input" measurements actually report the voltage drop across the
 input pins in microvolts. This is equivalent to the current through a 1mOhm
 sense resistor. Divide the reported value by the actual sense resistor value
 in mOhm to get the actual value.
-
-in0_input     Voltage at Vcc pin in millivolt (range 2.5V to 5V)
-temp1_input   Internal chip temperature in millidegrees Celcius
-curr1_input   Current in mA across v1-v2 assuming a 1mOhm sense resistor.
-curr2_input   Current in mA across v3-v4 assuming a 1mOhm sense resistor.

MAINTAINERS

@@ -6219,6 +6219,7 @@ L:	linux-hwmon@vger.kernel.org
 W:	http://hwmon.wiki.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
 S:	Maintained
+F:	Documentation/devicetree/bindings/hwmon/
 F:	Documentation/hwmon/
 F:	drivers/hwmon/
 F:	include/linux/hwmon*.h

drivers/hwmon/Kconfig

@@ -717,15 +717,12 @@ config SENSORS_LTC2945
 	  be called ltc2945.
 
 config SENSORS_LTC2990
-	tristate "Linear Technology LTC2990 (current monitoring mode only)"
+	tristate "Linear Technology LTC2990"
 	depends on I2C
 	help
 	  If you say yes here you get support for Linear Technology LTC2990
 	  I2C System Monitor. The LTC2990 supports a combination of voltage,
-	  current and temperature monitoring, but in addition to the Vcc supply
-	  voltage and chip temperature, this driver currently only supports
-	  reading two currents by measuring two differential voltages across
-	  series resistors.
+	  current and temperature monitoring.
 
 	  This driver can also be built as a module. If so, the module will
 	  be called ltc2990.

drivers/hwmon/asus_atk0110.c

@@ -125,6 +125,8 @@ struct atk_data {
 	int temperature_count;
 	int fan_count;
 	struct list_head sensor_list;
+	struct attribute_group attr_group;
+	const struct attribute_group *attr_groups[2];
 
 	struct {
 		struct dentry *root;
@@ -188,7 +190,6 @@ static int atk_add(struct acpi_device *device);
 static int atk_remove(struct acpi_device *device);
 static void atk_print_sensor(struct atk_data *data, union acpi_object *obj);
 static int atk_read_value(struct atk_sensor_data *sensor, u64 *value);
-static void atk_free_sensors(struct atk_data *data);
 
 static struct acpi_driver atk_driver = {
 	.name	= ATK_HID,
@@ -262,14 +263,6 @@ static ssize_t atk_limit2_show(struct device *dev,
 	return sprintf(buf, "%lld\n", value);
 }
 
-static ssize_t atk_name_show(struct device *dev,
-				struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "atk0110\n");
-}
-static struct device_attribute atk_name_attr =
-		__ATTR(name, 0444, atk_name_show, NULL);
-
 static void atk_init_attribute(struct device_attribute *attr, char *name,
 		sysfs_show_func show)
 {
@@ -912,15 +905,13 @@ static int atk_add_sensor(struct atk_data *data, union acpi_object *obj)
 	limit1 = atk_get_pack_member(data, obj, HWMON_PACK_LIMIT1);
 	limit2 = atk_get_pack_member(data, obj, HWMON_PACK_LIMIT2);
 
-	sensor = kzalloc(sizeof(*sensor), GFP_KERNEL);
+	sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
 	if (!sensor)
 		return -ENOMEM;
 
-	sensor->acpi_name = kstrdup(name->string.pointer, GFP_KERNEL);
-	if (!sensor->acpi_name) {
-		err = -ENOMEM;
-		goto out;
-	}
+	sensor->acpi_name = devm_kstrdup(dev, name->string.pointer, GFP_KERNEL);
+	if (!sensor->acpi_name)
+		return -ENOMEM;
 
 	INIT_LIST_HEAD(&sensor->list);
 	sensor->type = type;
@@ -961,9 +952,6 @@ static int atk_add_sensor(struct atk_data *data, union acpi_object *obj)
 	(*num)++;
 
 	return 1;
-out:
-	kfree(sensor);
-	return err;
 }
 
 static int atk_enumerate_old_hwmon(struct atk_data *data)
@@ -1004,8 +992,7 @@ static int atk_enumerate_old_hwmon(struct atk_data *data)
 		dev_warn(dev, METHOD_OLD_ENUM_TMP ": ACPI exception: %s\n",
 				acpi_format_exception(status));
 
-		ret = -ENODEV;
-		goto cleanup;
+		return -ENODEV;
 	}
 
 	pack = buf.pointer;
@@ -1026,8 +1013,7 @@ static int atk_enumerate_old_hwmon(struct atk_data *data)
 		dev_warn(dev, METHOD_OLD_ENUM_FAN ": ACPI exception: %s\n",
 				acpi_format_exception(status));
 
-		ret = -ENODEV;
-		goto cleanup;
+		return -ENODEV;
 	}
 
 	pack = buf.pointer;
@@ -1041,9 +1027,6 @@ static int atk_enumerate_old_hwmon(struct atk_data *data)
 	ACPI_FREE(buf.pointer);
 
 	return count;
-cleanup:
-	atk_free_sensors(data);
-	return ret;
 }
 
 static int atk_ec_present(struct atk_data *data)
@@ -1193,76 +1176,44 @@ static int atk_enumerate_new_hwmon(struct atk_data *data)
 	return err;
 }
 
-static int atk_create_files(struct atk_data *data)
+static int atk_init_attribute_groups(struct atk_data *data)
 {
+	struct device *dev = &data->acpi_dev->dev;
 	struct atk_sensor_data *s;
-	int err;
+	struct attribute **attrs;
+	int i = 0;
+	int len = (data->voltage_count + data->temperature_count
+			+ data->fan_count) * 4 + 1;
 
-	list_for_each_entry(s, &data->sensor_list, list) {
-		err = device_create_file(data->hwmon_dev, &s->input_attr);
-		if (err)
-			return err;
-		err = device_create_file(data->hwmon_dev, &s->label_attr);
-		if (err)
-			return err;
-		err = device_create_file(data->hwmon_dev, &s->limit1_attr);
-		if (err)
-			return err;
-		err = device_create_file(data->hwmon_dev, &s->limit2_attr);
-		if (err)
-			return err;
-	}
-
-	err = device_create_file(data->hwmon_dev, &atk_name_attr);
-
-	return err;
-}
-
-static void atk_remove_files(struct atk_data *data)
-{
-	struct atk_sensor_data *s;
+	attrs = devm_kcalloc(dev, len, sizeof(struct attribute *), GFP_KERNEL);
+	if (!attrs)
+		return -ENOMEM;
 
 	list_for_each_entry(s, &data->sensor_list, list) {
-		device_remove_file(data->hwmon_dev, &s->input_attr);
-		device_remove_file(data->hwmon_dev, &s->label_attr);
-		device_remove_file(data->hwmon_dev, &s->limit1_attr);
-		device_remove_file(data->hwmon_dev, &s->limit2_attr);
+		attrs[i++] = &s->input_attr.attr;
+		attrs[i++] = &s->label_attr.attr;
+		attrs[i++] = &s->limit1_attr.attr;
+		attrs[i++] = &s->limit2_attr.attr;
 	}
-	device_remove_file(data->hwmon_dev, &atk_name_attr);
-}
 
-static void atk_free_sensors(struct atk_data *data)
-{
-	struct list_head *head = &data->sensor_list;
-	struct atk_sensor_data *s, *tmp;
+	data->attr_group.attrs = attrs;
+	data->attr_groups[0] = &data->attr_group;
 
-	list_for_each_entry_safe(s, tmp, head, list) {
-		kfree(s->acpi_name);
-		kfree(s);
-	}
+	return 0;
 }
 
 static int atk_register_hwmon(struct atk_data *data)
 {
 	struct device *dev = &data->acpi_dev->dev;
-	int err;
 
 	dev_dbg(dev, "registering hwmon device\n");
-	data->hwmon_dev = hwmon_device_register(dev);
+	data->hwmon_dev = hwmon_device_register_with_groups(dev, "atk0110",
+							    data,
+							    data->attr_groups);
 	if (IS_ERR(data->hwmon_dev))
 		return PTR_ERR(data->hwmon_dev);
 
-	dev_dbg(dev, "populating sysfs directory\n");
-	err = atk_create_files(data);
-	if (err)
-		goto remove;
-
 	return 0;
-remove:
-	/* Cleanup the registered files */
-	atk_remove_files(data);
-	hwmon_device_unregister(data->hwmon_dev);
-	return err;
 }
 
 static int atk_probe_if(struct atk_data *data)
@@ -1350,7 +1301,7 @@ static int atk_add(struct acpi_device *device)
 
 	dev_dbg(&device->dev, "adding...\n");
 
-	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	data = devm_kzalloc(&device->dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
@@ -1397,20 +1348,20 @@ static int atk_add(struct acpi_device *device)
 		goto out;
 	}
 
+	err = atk_init_attribute_groups(data);
+	if (err)
+		goto out;
 	err = atk_register_hwmon(data);
 	if (err)
-		goto cleanup;
+		goto out;
 
 	atk_debugfs_init(data);
 
 	device->driver_data = data;
 	return 0;
-cleanup:
-	atk_free_sensors(data);
 out:
 	if (data->disable_ec)
 		atk_ec_ctl(data, 0);
-	kfree(data);
 	return err;
 }
 
@@ -1423,8 +1374,6 @@ static int atk_remove(struct acpi_device *device)
 
 	atk_debugfs_cleanup(data);
 
-	atk_remove_files(data);
-	atk_free_sensors(data);
 	hwmon_device_unregister(data->hwmon_dev);
 
 	if (data->disable_ec) {
@@ -1432,8 +1381,6 @@ static int atk_remove(struct acpi_device *device)
 			dev_err(&device->dev, "Failed to disable EC\n");
 	}
 
-	kfree(data);
-
 	return 0;
 }
 

drivers/hwmon/fschmd.c

@@ -105,7 +105,7 @@ static const u8 FSCHMD_REG_VOLT[7][6] = {
 static const int FSCHMD_NO_VOLT_SENSORS[7] = { 3, 3, 3, 3, 3, 3, 6 };
 
 /*
- * minimum pwm at which the fan is driven (pwm can by increased depending on
+ * minimum pwm at which the fan is driven (pwm can be increased depending on
  * the temp. Notice that for the scy some fans share there minimum speed.
  * Also notice that with the scy the sensor order is different than with the
  * other chips, this order was in the 2.4 driver and kept for consistency.

drivers/hwmon/hwmon.c

@@ -698,6 +698,9 @@ hwmon_device_register_with_info(struct device *dev, const char *name,
 	if (chip && (!chip->ops || !chip->ops->is_visible || !chip->info))
 		return ERR_PTR(-EINVAL);
 
+	if (chip && !dev)
+		return ERR_PTR(-EINVAL);
+
 	return __hwmon_device_register(dev, name, drvdata, chip, extra_groups);
 }
 EXPORT_SYMBOL_GPL(hwmon_device_register_with_info);

drivers/hwmon/k10temp.c

@@ -37,6 +37,10 @@ MODULE_PARM_DESC(force, "force loading on processors with erratum 319");
 /* Provide lock for writing to NB_SMU_IND_ADDR */
 static DEFINE_MUTEX(nb_smu_ind_mutex);
 
+#ifndef PCI_DEVICE_ID_AMD_15H_M70H_NB_F3
+#define PCI_DEVICE_ID_AMD_15H_M70H_NB_F3	0x15b3
+#endif
+
 #ifndef PCI_DEVICE_ID_AMD_17H_DF_F3
 #define PCI_DEVICE_ID_AMD_17H_DF_F3	0x1463
 #endif
@@ -81,6 +85,7 @@ struct k10temp_data {
 	void (*read_tempreg)(struct pci_dev *pdev, u32 *regval);
 	int temp_offset;
 	u32 temp_adjust_mask;
+	bool show_tdie;
 };
 
 struct tctl_offset {
@@ -141,17 +146,24 @@ static void read_tempreg_nb_f17(struct pci_dev *pdev, u32 *regval)
 		     F17H_M01H_REPORTED_TEMP_CTRL_OFFSET, regval);
 }
 
-static ssize_t temp1_input_show(struct device *dev,
-				struct device_attribute *attr, char *buf)
+static unsigned int get_raw_temp(struct k10temp_data *data)
 {
-	struct k10temp_data *data = dev_get_drvdata(dev);
-	u32 regval;
 	unsigned int temp;
+	u32 regval;
 
 	data->read_tempreg(data->pdev, &regval);
 	temp = (regval >> 21) * 125;
 	if (regval & data->temp_adjust_mask)
 		temp -= 49000;
+	return temp;
+}
+
+static ssize_t temp1_input_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct k10temp_data *data = dev_get_drvdata(dev);
+	unsigned int temp = get_raw_temp(data);
+
 	if (temp > data->temp_offset)
 		temp -= data->temp_offset;
 	else
@@ -160,6 +172,23 @@ static ssize_t temp1_input_show(struct device *dev,
 	return sprintf(buf, "%u\n", temp);
 }
 
+static ssize_t temp2_input_show(struct device *dev,
+				struct device_attribute *devattr, char *buf)
+{
+	struct k10temp_data *data = dev_get_drvdata(dev);
+	unsigned int temp = get_raw_temp(data);
+
+	return sprintf(buf, "%u\n", temp);
+}
+
+static ssize_t temp_label_show(struct device *dev,
+			       struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+	return sprintf(buf, "%s\n", attr->index ? "Tctl" : "Tdie");
+}
+
 static ssize_t temp1_max_show(struct device *dev,
 			      struct device_attribute *attr, char *buf)
 {
@@ -187,16 +216,23 @@ static DEVICE_ATTR_RO(temp1_max);
 static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit, NULL, 0);
 static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, show_temp_crit, NULL, 1);
 
+static SENSOR_DEVICE_ATTR(temp1_label, 0444, temp_label_show, NULL, 0);
+static DEVICE_ATTR_RO(temp2_input);
+static SENSOR_DEVICE_ATTR(temp2_label, 0444, temp_label_show, NULL, 1);
+
 static umode_t k10temp_is_visible(struct kobject *kobj,
 				  struct attribute *attr, int index)
 {
 	struct device *dev = container_of(kobj, struct device, kobj);
 	struct k10temp_data *data = dev_get_drvdata(dev);
 	struct pci_dev *pdev = data->pdev;
+	u32 reg;
 
-	if (index >= 2) {
-		u32 reg;
-
+	switch (index) {
+	case 0 ... 1:	/* temp1_input, temp1_max */
+	default:
+		break;
+	case 2 ... 3:	/* temp1_crit, temp1_crit_hyst */
 		if (!data->read_htcreg)
 			return 0;
 
@@ -208,6 +244,11 @@ static umode_t k10temp_is_visible(struct kobject *kobj,
 		data->read_htcreg(data->pdev, &reg);
 		if (!(reg & HTC_ENABLE))
 			return 0;
+		break;
+	case 4 ... 6:	/* temp1_label, temp2_input, temp2_label */
+		if (!data->show_tdie)
+			return 0;
+		break;
 	}
 	return attr->mode;
 }
@@ -217,6 +258,9 @@ static struct attribute *k10temp_attrs[] = {
 	&dev_attr_temp1_max.attr,
 	&sensor_dev_attr_temp1_crit.dev_attr.attr,
 	&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
+	&sensor_dev_attr_temp1_label.dev_attr.attr,
+	&dev_attr_temp2_input.attr,
+	&sensor_dev_attr_temp2_label.dev_attr.attr,
 	NULL
 };
 
@@ -292,6 +336,7 @@ static int k10temp_probe(struct pci_dev *pdev,
 	} else if (boot_cpu_data.x86 == 0x17) {
 		data->temp_adjust_mask = 0x80000;
 		data->read_tempreg = read_tempreg_nb_f17;
+		data->show_tdie = true;
 	} else {
 		data->read_htcreg = read_htcreg_pci;
 		data->read_tempreg = read_tempreg_pci;
@@ -320,6 +365,7 @@ static const struct pci_device_id k10temp_id_table[] = {
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M60H_NB_F3) },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M70H_NB_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_DF_F3) },

drivers/hwmon/ltc2990.c

@@ -5,18 +5,16 @@
  * Author: Mike Looijmans <mike.looijmans@topic.nl>
  *
  * License: GPLv2
- *
- * This driver assumes the chip is wired as a dual current monitor, and
- * reports the voltage drop across two series resistors. It also reports
- * the chip's internal temperature and Vcc power supply voltage.
  */
 
+#include <linux/bitops.h>
 #include <linux/err.h>
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/i2c.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of.h>
 
 #define LTC2990_STATUS	0x00
 #define LTC2990_CONTROL	0x01
@@ -28,45 +26,108 @@
 #define LTC2990_V4_MSB	0x0C
 #define LTC2990_VCC_MSB	0x0E
 
-#define LTC2990_CONTROL_KELVIN		BIT(7)
-#define LTC2990_CONTROL_SINGLE		BIT(6)
-#define LTC2990_CONTROL_MEASURE_ALL	(0x3 << 3)
-#define LTC2990_CONTROL_MODE_CURRENT	0x06
-#define LTC2990_CONTROL_MODE_VOLTAGE	0x07
+#define LTC2990_IN0	BIT(0)
+#define LTC2990_IN1	BIT(1)
+#define LTC2990_IN2	BIT(2)
+#define LTC2990_IN3	BIT(3)
+#define LTC2990_IN4	BIT(4)
+#define LTC2990_CURR1	BIT(5)
+#define LTC2990_CURR2	BIT(6)
+#define LTC2990_TEMP1	BIT(7)
+#define LTC2990_TEMP2	BIT(8)
+#define LTC2990_TEMP3	BIT(9)
+#define LTC2990_NONE	0
+#define LTC2990_ALL	GENMASK(9, 0)
 
-/* convert raw register value to sign-extended integer in 16-bit range */
-static int ltc2990_voltage_to_int(int raw)
-{
-	if (raw & BIT(14))
-		return -(0x4000 - (raw & 0x3FFF)) << 2;
-	else
-		return (raw & 0x3FFF) << 2;
-}
+#define LTC2990_MODE0_SHIFT	0
+#define LTC2990_MODE0_MASK	GENMASK(2, 0)
+#define LTC2990_MODE1_SHIFT	3
+#define LTC2990_MODE1_MASK	GENMASK(1, 0)
+
+/* Enabled measurements for mode bits 2..0 */
+static const int ltc2990_attrs_ena_0[] = {
+	LTC2990_IN1 | LTC2990_IN2 | LTC2990_TEMP3,
+	LTC2990_CURR1 | LTC2990_TEMP3,
+	LTC2990_CURR1 | LTC2990_IN3 | LTC2990_IN4,
+	LTC2990_TEMP2 | LTC2990_IN3 | LTC2990_IN4,
+	LTC2990_TEMP2 | LTC2990_CURR2,
+	LTC2990_TEMP2 | LTC2990_TEMP3,
+	LTC2990_CURR1 | LTC2990_CURR2,
+	LTC2990_IN1 | LTC2990_IN2 | LTC2990_IN3 | LTC2990_IN4
+};
+
+/* Enabled measurements for mode bits 4..3 */
+static const int ltc2990_attrs_ena_1[] = {
+	LTC2990_NONE,
+	LTC2990_TEMP2 | LTC2990_IN1 | LTC2990_CURR1,
+	LTC2990_TEMP3 | LTC2990_IN3 | LTC2990_CURR2,
+	LTC2990_ALL
+};
+
+struct ltc2990_data {
+	struct i2c_client *i2c;
+	u32 mode[2];
+};
 
 /* Return the converted value from the given register in uV or mC */
-static int ltc2990_get_value(struct i2c_client *i2c, u8 reg, int *result)
+static int ltc2990_get_value(struct i2c_client *i2c, int index, int *result)
 {
 	int val;
+	u8 reg;
+
+	switch (index) {
+	case LTC2990_IN0:
+		reg = LTC2990_VCC_MSB;
+		break;
+	case LTC2990_IN1:
+	case LTC2990_CURR1:
+	case LTC2990_TEMP2:
+		reg = LTC2990_V1_MSB;
+		break;
+	case LTC2990_IN2:
+		reg = LTC2990_V2_MSB;
+		break;
+	case LTC2990_IN3:
+	case LTC2990_CURR2:
+	case LTC2990_TEMP3:
+		reg = LTC2990_V3_MSB;
+		break;
+	case LTC2990_IN4:
+		reg = LTC2990_V4_MSB;
+		break;
+	case LTC2990_TEMP1:
+		reg = LTC2990_TINT_MSB;
+		break;
+	default:
+		return -EINVAL;
+	}
 
 	val = i2c_smbus_read_word_swapped(i2c, reg);
 	if (unlikely(val < 0))
 		return val;
 
-	switch (reg) {
-	case LTC2990_TINT_MSB:
-		/* internal temp, 0.0625 degrees/LSB, 13-bit  */
-		val = (val & 0x1FFF) << 3;
-		*result = (val * 1000) >> 7;
+	switch (index) {
+	case LTC2990_TEMP1:
+	case LTC2990_TEMP2:
+	case LTC2990_TEMP3:
+		/* temp, 0.0625 degrees/LSB */
+		*result = sign_extend32(val, 12) * 1000 / 16;
 		break;
-	case LTC2990_V1_MSB:
-	case LTC2990_V3_MSB:
-		 /* Vx-Vy, 19.42uV/LSB. Depends on mode. */
-		*result = ltc2990_voltage_to_int(val) * 1942 / (4 * 100);
+	case LTC2990_CURR1:
+	case LTC2990_CURR2:
+		 /* Vx-Vy, 19.42uV/LSB */
+		*result = sign_extend32(val, 14) * 1942 / 100;
 		break;
-	case LTC2990_VCC_MSB:
-		/* Vcc, 305.18μV/LSB, 2.5V offset */
-		*result = (ltc2990_voltage_to_int(val) * 30518 /
-			   (4 * 100 * 1000)) + 2500;
+	case LTC2990_IN0:
+		/* Vcc, 305.18uV/LSB, 2.5V offset */
+		*result = sign_extend32(val, 14) * 30518 / (100 * 1000) + 2500;
+		break;
+	case LTC2990_IN1:
+	case LTC2990_IN2:
+	case LTC2990_IN3:
+	case LTC2990_IN4:
+		/* Vx, 305.18uV/LSB */
+		*result = sign_extend32(val, 14) * 30518 / (100 * 1000);
 		break;
 	default:
 		return -EINVAL; /* won't happen, keep compiler happy */
@@ -79,48 +140,117 @@ static ssize_t ltc2990_show_value(struct device *dev,
 				  struct device_attribute *da, char *buf)
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	struct ltc2990_data *data = dev_get_drvdata(dev);
 	int value;
 	int ret;
 
-	ret = ltc2990_get_value(dev_get_drvdata(dev), attr->index, &value);
+	ret = ltc2990_get_value(data->i2c, attr->index, &value);
 	if (unlikely(ret < 0))
 		return ret;
 
 	return snprintf(buf, PAGE_SIZE, "%d\n", value);
 }
 
+static umode_t ltc2990_attrs_visible(struct kobject *kobj,
+				     struct attribute *a, int n)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct ltc2990_data *data = dev_get_drvdata(dev);
+	struct device_attribute *da =
+			container_of(a, struct device_attribute, attr);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+
+	int attrs_mask = LTC2990_IN0 | LTC2990_TEMP1 |
+			 (ltc2990_attrs_ena_0[data->mode[0]] &
+			  ltc2990_attrs_ena_1[data->mode[1]]);
+
+	if (attr->index & attrs_mask)
+		return a->mode;
+
+	return 0;
+}
+
 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ltc2990_show_value, NULL,
-			  LTC2990_TINT_MSB);
+			  LTC2990_TEMP1);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, ltc2990_show_value, NULL,
+			  LTC2990_TEMP2);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, ltc2990_show_value, NULL,
+			  LTC2990_TEMP3);
 static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ltc2990_show_value, NULL,
-			  LTC2990_V1_MSB);
+			  LTC2990_CURR1);
 static SENSOR_DEVICE_ATTR(curr2_input, S_IRUGO, ltc2990_show_value, NULL,
-			  LTC2990_V3_MSB);
+			  LTC2990_CURR2);
 static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, ltc2990_show_value, NULL,
-			  LTC2990_VCC_MSB);
+			  LTC2990_IN0);
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, ltc2990_show_value, NULL,
+			  LTC2990_IN1);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, ltc2990_show_value, NULL,
+			  LTC2990_IN2);
+static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, ltc2990_show_value, NULL,
+			  LTC2990_IN3);
+static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, ltc2990_show_value, NULL,
+			  LTC2990_IN4);
 
 static struct attribute *ltc2990_attrs[] = {
 	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp3_input.dev_attr.attr,
 	&sensor_dev_attr_curr1_input.dev_attr.attr,
 	&sensor_dev_attr_curr2_input.dev_attr.attr,
 	&sensor_dev_attr_in0_input.dev_attr.attr,
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in3_input.dev_attr.attr,
+	&sensor_dev_attr_in4_input.dev_attr.attr,
 	NULL,
 };
-ATTRIBUTE_GROUPS(ltc2990);
+
+static const struct attribute_group ltc2990_group = {
+	.attrs = ltc2990_attrs,
+	.is_visible = ltc2990_attrs_visible,
+};
+__ATTRIBUTE_GROUPS(ltc2990);
 
 static int ltc2990_i2c_probe(struct i2c_client *i2c,
 			     const struct i2c_device_id *id)
 {
 	int ret;
 	struct device *hwmon_dev;
+	struct ltc2990_data *data;
+	struct device_node *of_node = i2c->dev.of_node;
 
 	if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
 				     I2C_FUNC_SMBUS_WORD_DATA))
 		return -ENODEV;
 
-	/* Setup continuous mode, current monitor */
+	data = devm_kzalloc(&i2c->dev, sizeof(struct ltc2990_data), GFP_KERNEL);
+	if (unlikely(!data))
+		return -ENOMEM;
+
+	data->i2c = i2c;
+
+	if (of_node) {
+		ret = of_property_read_u32_array(of_node, "lltc,meas-mode",
+						 data->mode, 2);
+		if (ret < 0)
+			return ret;
+
+		if (data->mode[0] & ~LTC2990_MODE0_MASK ||
+		    data->mode[1] & ~LTC2990_MODE1_MASK)
+			return -EINVAL;
+	} else {
+		ret = i2c_smbus_read_byte_data(i2c, LTC2990_CONTROL);
+		if (ret < 0)
+			return ret;
+
+		data->mode[0] = ret >> LTC2990_MODE0_SHIFT & LTC2990_MODE0_MASK;
+		data->mode[1] = ret >> LTC2990_MODE1_SHIFT & LTC2990_MODE1_MASK;
+	}
+
+	/* Setup continuous mode */
 	ret = i2c_smbus_write_byte_data(i2c, LTC2990_CONTROL,
-					LTC2990_CONTROL_MEASURE_ALL |
-					LTC2990_CONTROL_MODE_CURRENT);
+					data->mode[0] << LTC2990_MODE0_SHIFT |
+					data->mode[1] << LTC2990_MODE1_SHIFT);
 	if (ret < 0) {
 		dev_err(&i2c->dev, "Error: Failed to set control mode.\n");
 		return ret;
@@ -134,7 +264,7 @@ static int ltc2990_i2c_probe(struct i2c_client *i2c,
 
 	hwmon_dev = devm_hwmon_device_register_with_groups(&i2c->dev,
 							   i2c->name,
-							   i2c,
+							   data,
 							   ltc2990_groups);
 
 	return PTR_ERR_OR_ZERO(hwmon_dev);

drivers/hwmon/mc13783-adc.c

@@ -63,6 +63,10 @@ static int mc13783_adc_read(struct device *dev,
 	if (ret)
 		return ret;
 
+	/* ADIN7 subchannels */
+	if (channel >= 16)
+		channel = 7;
+
 	channel &= 0x7;
 
 	*val = (sample[channel % 4] >> (channel > 3 ? 14 : 2)) & 0x3ff;
@@ -111,6 +115,57 @@ static ssize_t mc13783_adc_read_gp(struct device *dev,
 	return sprintf(buf, "%u\n", val);
 }
 
+static ssize_t mc13783_adc_read_uid(struct device *dev,
+		struct device_attribute *devattr, char *buf)
+{
+	unsigned int val;
+	struct platform_device *pdev = to_platform_device(dev);
+	kernel_ulong_t driver_data = platform_get_device_id(pdev)->driver_data;
+	int ret = mc13783_adc_read(dev, devattr, &val);
+
+	if (ret)
+		return ret;
+
+	if (driver_data & MC13783_ADC_BPDIV2)
+		/* MC13892 have 1/2 divider, input range is [0, 4.800V] */
+		val = DIV_ROUND_CLOSEST(val * 4800, 1024);
+	else
+		/* MC13783 have 0.9 divider, input range is [0, 2.555V] */
+		val = DIV_ROUND_CLOSEST(val * 2555, 1024);
+
+	return sprintf(buf, "%u\n", val);
+}
+
+static ssize_t mc13783_adc_read_temp(struct device *dev,
+		struct device_attribute *devattr, char *buf)
+{
+	unsigned int val;
+	struct platform_device *pdev = to_platform_device(dev);
+	kernel_ulong_t driver_data = platform_get_device_id(pdev)->driver_data;
+	int ret = mc13783_adc_read(dev, devattr, &val);
+
+	if (ret)
+		return ret;
+
+	if (driver_data & MC13783_ADC_BPDIV2) {
+		/*
+		 * MC13892:
+		 * Die Temperature Read Out Code at 25C 680
+		 * Temperature change per LSB +0.4244C
+		 */
+		ret = DIV_ROUND_CLOSEST(-2635920 + val * 4244, 10);
+	} else {
+		/*
+		 * MC13783:
+		 * Die Temperature Read Out Code at 25C 282
+		 * Temperature change per LSB -1.14C
+		 */
+		ret = 346480 - 1140 * val;
+	}
+
+	return sprintf(buf, "%d\n", ret);
+}
+
 static DEVICE_ATTR_RO(name);
 static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, mc13783_adc_read_bp, NULL, 2);
 static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, mc13783_adc_read_gp, NULL, 5);
@@ -124,6 +179,9 @@ static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, mc13783_adc_read_gp, NULL, 12);
 static SENSOR_DEVICE_ATTR(in13_input, S_IRUGO, mc13783_adc_read_gp, NULL, 13);
 static SENSOR_DEVICE_ATTR(in14_input, S_IRUGO, mc13783_adc_read_gp, NULL, 14);
 static SENSOR_DEVICE_ATTR(in15_input, S_IRUGO, mc13783_adc_read_gp, NULL, 15);
+static SENSOR_DEVICE_ATTR(in16_input, S_IRUGO, mc13783_adc_read_uid, NULL, 16);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
+			  mc13783_adc_read_temp, NULL, 17);
 
 static struct attribute *mc13783_attr_base[] = {
 	&dev_attr_name.attr,
@@ -131,6 +189,8 @@ static struct attribute *mc13783_attr_base[] = {
 	&sensor_dev_attr_in5_input.dev_attr.attr,
 	&sensor_dev_attr_in6_input.dev_attr.attr,
 	&sensor_dev_attr_in7_input.dev_attr.attr,
+	&sensor_dev_attr_in16_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
 	NULL
 };
 

drivers/mfd/mc13xxx-core.c

@@ -279,8 +279,21 @@ int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode,
 	adc0 = MC13XXX_ADC0_ADINC1 | MC13XXX_ADC0_ADINC2;
 	adc1 = MC13XXX_ADC1_ADEN | MC13XXX_ADC1_ADTRIGIGN | MC13XXX_ADC1_ASC;
 
-	if (channel > 7)
+	/*
+	 * Channels mapped through ADIN7:
+	 * 7  - General purpose ADIN7
+	 * 16 - UID
+	 * 17 - Die temperature
+	 */
+	if (channel > 7 && channel < 16) {
 		adc1 |= MC13XXX_ADC1_ADSEL;
+	} else if (channel == 16) {
+		adc0 |= MC13XXX_ADC0_ADIN7SEL_UID;
+		channel = 7;
+	} else if (channel == 17) {
+		adc0 |= MC13XXX_ADC0_ADIN7SEL_DIE;
+		channel = 7;
+	}
 
 	switch (mode) {
 	case MC13XXX_ADC_MODE_TS:

include/linux/mfd/mc13xxx.h

@@ -243,6 +243,8 @@ struct mc13xxx_platform_data {
 #define MC13XXX_ADC0_LICELLCON		(1 << 0)
 #define MC13XXX_ADC0_CHRGICON		(1 << 1)
 #define MC13XXX_ADC0_BATICON		(1 << 2)
+#define MC13XXX_ADC0_ADIN7SEL_DIE	(1 << 4)
+#define MC13XXX_ADC0_ADIN7SEL_UID	(2 << 4)
 #define MC13XXX_ADC0_ADREFEN		(1 << 10)
 #define MC13XXX_ADC0_TSMOD0		(1 << 12)
 #define MC13XXX_ADC0_TSMOD1		(1 << 13)