Merge branch 'bcm7xxx-fixes'

Florian Fainelli says:

====================
Subject: [PATCH net v2 0/4] net: phy: bcm7xxx 40nm PHY fixes

Here is a collection of fixes for the 40nm Ethernet PHY supported
by the 7xxx PHY driver, please also queue these fixes for stable.

Changes in v2:

- dropped the cleanup patch, not appropriate
- added another patch removing bogus wildcard entries
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/bcm7xxx.c

@@ -250,10 +250,6 @@ static int bcm7xxx_config_init(struct phy_device *phydev)
 	phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO);
 	phy_read(phydev, MII_BCM7XXX_AUX_MODE);
 
-	/* Workaround only required for 100Mbits/sec capable PHYs */
-	if (phydev->supported & PHY_GBIT_FEATURES)
-		return 0;
-
 	/* set shadow mode 2 */
 	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
 			MII_BCM7XXX_SHD_MODE_2, MII_BCM7XXX_SHD_MODE_2);
@@ -270,7 +266,7 @@ static int bcm7xxx_config_init(struct phy_device *phydev)
 	phy_write(phydev, MII_BCM7XXX_100TX_FALSE_CAR, 0x7555);
 
 	/* reset shadow mode 2 */
-	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, MII_BCM7XXX_SHD_MODE_2, 0);
+	ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0, MII_BCM7XXX_SHD_MODE_2);
 	if (ret < 0)
 		return ret;
 
@@ -307,11 +303,6 @@ static int bcm7xxx_suspend(struct phy_device *phydev)
 	return 0;
 }
 
-static int bcm7xxx_dummy_config_init(struct phy_device *phydev)
-{
-	return 0;
-}
-
 #define BCM7XXX_28NM_GPHY(_oui, _name)					\
 {									\
 	.phy_id		= (_oui),					\
@@ -337,7 +328,7 @@ static struct phy_driver bcm7xxx_driver[] = {
 	.phy_id         = PHY_ID_BCM7425,
 	.phy_id_mask    = 0xfffffff0,
 	.name           = "Broadcom BCM7425",
-	.features       = PHY_GBIT_FEATURES |
+	.features       = PHY_BASIC_FEATURES |
 			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
 	.flags          = PHY_IS_INTERNAL,
 	.config_init    = bcm7xxx_config_init,
@@ -349,7 +340,7 @@ static struct phy_driver bcm7xxx_driver[] = {
 	.phy_id         = PHY_ID_BCM7429,
 	.phy_id_mask    = 0xfffffff0,
 	.name           = "Broadcom BCM7429",
-	.features       = PHY_GBIT_FEATURES |
+	.features       = PHY_BASIC_FEATURES |
 			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
 	.flags          = PHY_IS_INTERNAL,
 	.config_init    = bcm7xxx_config_init,
@@ -361,7 +352,7 @@ static struct phy_driver bcm7xxx_driver[] = {
 	.phy_id         = PHY_ID_BCM7435,
 	.phy_id_mask    = 0xfffffff0,
 	.name           = "Broadcom BCM7435",
-	.features       = PHY_GBIT_FEATURES |
+	.features       = PHY_BASIC_FEATURES |
 			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
 	.flags          = PHY_IS_INTERNAL,
 	.config_init    = bcm7xxx_config_init,
@@ -369,30 +360,6 @@ static struct phy_driver bcm7xxx_driver[] = {
 	.read_status    = genphy_read_status,
 	.suspend        = bcm7xxx_suspend,
 	.resume         = bcm7xxx_config_init,
-}, {
-	.phy_id		= PHY_BCM_OUI_4,
-	.phy_id_mask	= 0xffff0000,
-	.name		= "Broadcom BCM7XXX 40nm",
-	.features	= PHY_GBIT_FEATURES |
-			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
-	.flags		= PHY_IS_INTERNAL,
-	.config_init	= bcm7xxx_config_init,
-	.config_aneg	= genphy_config_aneg,
-	.read_status	= genphy_read_status,
-	.suspend	= bcm7xxx_suspend,
-	.resume		= bcm7xxx_config_init,
-}, {
-	.phy_id		= PHY_BCM_OUI_5,
-	.phy_id_mask	= 0xffffff00,
-	.name		= "Broadcom BCM7XXX 65nm",
-	.features	= PHY_BASIC_FEATURES |
-			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
-	.flags		= PHY_IS_INTERNAL,
-	.config_init	= bcm7xxx_dummy_config_init,
-	.config_aneg	= genphy_config_aneg,
-	.read_status	= genphy_read_status,
-	.suspend	= bcm7xxx_suspend,
-	.resume		= bcm7xxx_config_init,
 } };
 
 static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
@@ -404,8 +371,6 @@ static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
 	{ PHY_ID_BCM7439, 0xfffffff0, },
 	{ PHY_ID_BCM7435, 0xfffffff0, },
 	{ PHY_ID_BCM7445, 0xfffffff0, },
-	{ PHY_BCM_OUI_4, 0xffff0000 },
-	{ PHY_BCM_OUI_5, 0xffffff00 },
 	{ }
 };