docs: kvm: devices/arm-vgit-v3.txt to ReST

- Use title markups;
- change indent to match ReST syntax;
- use proper table markups;
- use literal block markups.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Documentation/virt/kvm/devices/arm-vgic-v3.txt → Documentation/virt/kvm/devices/arm-vgic-v3.rst

+.. SPDX-License-Identifier: GPL-2.0
+
+==============================================================
 ARM Virtual Generic Interrupt Controller v3 and later (VGICv3)
 ==============================================================
 
 
 Device types supported:
-  KVM_DEV_TYPE_ARM_VGIC_V3     ARM Generic Interrupt Controller v3.0
+  - KVM_DEV_TYPE_ARM_VGIC_V3     ARM Generic Interrupt Controller v3.0
 
 Only one VGIC instance may be instantiated through this API.  The created VGIC
 will act as the VM interrupt controller, requiring emulated user-space devices
@@ -16,6 +19,7 @@ Creating a guest GICv3 device requires a host GICv3 as well.
 Groups:
   KVM_DEV_ARM_VGIC_GRP_ADDR
    Attributes:
+
     KVM_VGIC_V3_ADDR_TYPE_DIST (rw, 64-bit)
       Base address in the guest physical address space of the GICv3 distributor
       register mappings. Only valid for KVM_DEV_TYPE_ARM_VGIC_V3.
@@ -29,21 +33,25 @@ Groups:
       This address needs to be 64K aligned.
 
     KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION (rw, 64-bit)
-      The attribute data pointed to by kvm_device_attr.addr is a __u64 value:
+      The attribute data pointed to by kvm_device_attr.addr is a __u64 value::
+
         bits:     | 63   ....  52  |  51   ....   16 | 15 - 12  |11 - 0
         values:   |     count      |       base      |  flags   | index
+
       - index encodes the unique redistributor region index
       - flags: reserved for future use, currently 0
       - base field encodes bits [51:16] of the guest physical base address
         of the first redistributor in the region.
       - count encodes the number of redistributors in the region. Must be
         greater than 0.
+
       There are two 64K pages for each redistributor in the region and
       redistributors are laid out contiguously within the region. Regions
       are filled with redistributors in the index order. The sum of all
       region count fields must be greater than or equal to the number of
       VCPUs. Redistributor regions must be registered in the incremental
       index order, starting from index 0.
+
       The characteristics of a specific redistributor region can be read
       by presetting the index field in the attr data.
       Only valid for KVM_DEV_TYPE_ARM_VGIC_V3.
@@ -52,21 +60,25 @@ Groups:
   KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION attributes.
 
   Errors:
-    -E2BIG:  Address outside of addressable IPA range
-    -EINVAL: Incorrectly aligned address, bad redistributor region
+
+    =======  =============================================================
+    -E2BIG   Address outside of addressable IPA range
+    -EINVAL  Incorrectly aligned address, bad redistributor region
              count/index, mixed redistributor region attribute usage
-    -EEXIST: Address already configured
-    -ENOENT: Attempt to read the characteristics of a non existing
+    -EEXIST  Address already configured
+    -ENOENT  Attempt to read the characteristics of a non existing
              redistributor region
-    -ENXIO:  The group or attribute is unknown/unsupported for this device
+    -ENXIO   The group or attribute is unknown/unsupported for this device
              or hardware support is missing.
-    -EFAULT: Invalid user pointer for attr->addr.
+    -EFAULT  Invalid user pointer for attr->addr.
+    =======  =============================================================
 
 
-  KVM_DEV_ARM_VGIC_GRP_DIST_REGS
-  KVM_DEV_ARM_VGIC_GRP_REDIST_REGS
+  KVM_DEV_ARM_VGIC_GRP_DIST_REGS, KVM_DEV_ARM_VGIC_GRP_REDIST_REGS
    Attributes:
-    The attr field of kvm_device_attr encodes two values:
+
+    The attr field of kvm_device_attr encodes two values::
+
       bits:     | 63   ....  32  |  31   ....    0 |
       values:   |      mpidr     |      offset     |
 
@@ -93,7 +105,8 @@ Groups:
     redistributor is accessed.  The mpidr is ignored for the distributor.
 
     The mpidr encoding is based on the affinity information in the
-    architecture defined MPIDR, and the field is encoded as follows:
+    architecture defined MPIDR, and the field is encoded as follows::
+
       | 63 .... 56 | 55 .... 48 | 47 .... 40 | 39 .... 32 |
       |    Aff3    |    Aff2    |    Aff1    |    Aff0    |
 
@@ -148,24 +161,30 @@ Groups:
     ignored.
 
   Errors:
-    -ENXIO: Getting or setting this register is not yet supported
-    -EBUSY: One or more VCPUs are running
+
+    ======  =====================================================
+    -ENXIO  Getting or setting this register is not yet supported
+    -EBUSY  One or more VCPUs are running
+    ======  =====================================================
 
 
   KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS
    Attributes:
-    The attr field of kvm_device_attr encodes two values:
+
+    The attr field of kvm_device_attr encodes two values::
+
       bits:     | 63      ....       32 | 31  ....  16 | 15  ....  0 |
       values:   |         mpidr         |      RES     |    instr    |
 
     The mpidr field encodes the CPU ID based on the affinity information in the
-    architecture defined MPIDR, and the field is encoded as follows:
+    architecture defined MPIDR, and the field is encoded as follows::
+
       | 63 .... 56 | 55 .... 48 | 47 .... 40 | 39 .... 32 |
       |    Aff3    |    Aff2    |    Aff1    |    Aff0    |
 
     The instr field encodes the system register to access based on the fields
     defined in the A64 instruction set encoding for system register access
-    (RES means the bits are reserved for future use and should be zero):
+    (RES means the bits are reserved for future use and should be zero)::
 
       | 15 ... 14 | 13 ... 11 | 10 ... 7 | 6 ... 3 | 2 ... 0 |
       |   Op 0    |    Op1    |    CRn   |   CRm   |   Op2   |
@@ -178,26 +197,35 @@ Groups:
 
     CPU interface registers access is not implemented for AArch32 mode.
     Error -ENXIO is returned when accessed in AArch32 mode.
+
   Errors:
-    -ENXIO: Getting or setting this register is not yet supported
-    -EBUSY: VCPU is running
-    -EINVAL: Invalid mpidr or register value supplied
+
+    =======  =====================================================
+    -ENXIO   Getting or setting this register is not yet supported
+    -EBUSY   VCPU is running
+    -EINVAL  Invalid mpidr or register value supplied
+    =======  =====================================================
 
 
   KVM_DEV_ARM_VGIC_GRP_NR_IRQS
    Attributes:
+
     A value describing the number of interrupts (SGI, PPI and SPI) for
     this GIC instance, ranging from 64 to 1024, in increments of 32.
 
     kvm_device_attr.addr points to a __u32 value.
 
   Errors:
-    -EINVAL: Value set is out of the expected range
-    -EBUSY: Value has already be set.
+
+    =======  ======================================
+    -EINVAL  Value set is out of the expected range
+    -EBUSY   Value has already be set.
+    =======  ======================================
 
 
   KVM_DEV_ARM_VGIC_GRP_CTRL
    Attributes:
+
     KVM_DEV_ARM_VGIC_CTRL_INIT
       request the initialization of the VGIC, no additional parameter in
       kvm_device_attr.addr.
@@ -205,18 +233,24 @@ Groups:
       save all LPI pending bits into guest RAM pending tables.
 
       The first kB of the pending table is not altered by this operation.
+
   Errors:
-    -ENXIO: VGIC not properly configured as required prior to calling
+
+    =======  ========================================================
+    -ENXIO   VGIC not properly configured as required prior to calling
              this attribute
-    -ENODEV: no online VCPU
-    -ENOMEM: memory shortage when allocating vgic internal data
-    -EFAULT: Invalid guest ram access
-    -EBUSY:  One or more VCPUS are running
+    -ENODEV  no online VCPU
+    -ENOMEM  memory shortage when allocating vgic internal data
+    -EFAULT  Invalid guest ram access
+    -EBUSY   One or more VCPUS are running
+    =======  ========================================================
 
 
   KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO
    Attributes:
-    The attr field of kvm_device_attr encodes the following values:
+
+    The attr field of kvm_device_attr encodes the following values::
+
       bits:     | 63      ....       32 | 31   ....    10 | 9  ....  0 |
       values:   |         mpidr         |      info       |   vINTID   |
 
@@ -228,6 +262,7 @@ Groups:
       VGIC_LEVEL_INFO_LINE_LEVEL:
 	Get/Set the input level of the IRQ line for a set of 32 contiguously
 	numbered interrupts.
+
 	vINTID must be a multiple of 32.
 
 	kvm_device_attr.addr points to a __u32 value which will contain a
@@ -243,9 +278,14 @@ Groups:
     reported with the same value regardless of the mpidr specified.
 
     The mpidr field encodes the CPU ID based on the affinity information in the
-    architecture defined MPIDR, and the field is encoded as follows:
+    architecture defined MPIDR, and the field is encoded as follows::
+
       | 63 .... 56 | 55 .... 48 | 47 .... 40 | 39 .... 32 |
       |    Aff3    |    Aff2    |    Aff1    |    Aff0    |
+
   Errors:
-    -EINVAL: vINTID is not multiple of 32 or
-     info field is not VGIC_LEVEL_INFO_LINE_LEVEL
+
+    =======  =============================================
+    -EINVAL  vINTID is not multiple of 32 or info field is
+	     not VGIC_LEVEL_INFO_LINE_LEVEL
+    =======  =============================================

Documentation/virt/kvm/devices/index.rst

@@ -8,3 +8,4 @@ Devices
    :maxdepth: 2
 
    arm-vgic-its
+   arm-vgic-v3