Merge tag 'drm-intel-fixes-2017-09-20' of...

Merge tag 'drm-intel-fixes-2017-09-20' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes

drm/i915 fixes for 4.14-rc1

Couple fixes for stable:

- Fix MIPI panels on BXT.
- Fix PCI BARs information on GVT.

Plus other fixes:

- Fix minimal brightness for BXT, GLK, CFL and CNL.
- Fix compilation warning: unused in_vbl
- Fix error handling in intel_framebuffer_init

* tag 'drm-intel-fixes-2017-09-20' of git://anongit.freedesktop.org/git/drm-intel:
  drm/i915: Remove unused 'in_vbl' from i915_get_crtc_scanoutpos()
  drm/i915/cnp: set min brightness from VBT
  Revert "drm/i915/bxt: Disable device ready before shutdown command"
  drm/i915/bxt: set min brightness from VBT
  drm/i915: Fix an error handling in 'intel_framebuffer_init()'
  drm/i915/gvt: Fix incorrect PCI BARs reporting

drivers/gpu/drm/i915/gvt/cfg_space.c

@@ -197,19 +197,14 @@ static int emulate_pci_command_write(struct intel_vgpu *vgpu,
 static int emulate_pci_bar_write(struct intel_vgpu *vgpu, unsigned int offset,
 	void *p_data, unsigned int bytes)
 {
-	unsigned int bar_index =
-		(rounddown(offset, 8) % PCI_BASE_ADDRESS_0) / 8;
 	u32 new = *(u32 *)(p_data);
 	bool lo = IS_ALIGNED(offset, 8);
 	u64 size;
 	int ret = 0;
 	bool mmio_enabled =
 		vgpu_cfg_space(vgpu)[PCI_COMMAND] & PCI_COMMAND_MEMORY;
+	struct intel_vgpu_pci_bar *bars = vgpu->cfg_space.bar;
 
-	if (WARN_ON(bar_index >= INTEL_GVT_PCI_BAR_MAX))
-		return -EINVAL;
-
-	if (new == 0xffffffff) {
 	/*
 	 * Power-up software can determine how much address
 	 * space the device requires by writing a value of
@@ -217,58 +212,50 @@ static int emulate_pci_bar_write(struct intel_vgpu *vgpu, unsigned int offset,
 	 * back. The device will return 0's in all don't-care
 	 * address bits.
 	 */
-		size = vgpu->cfg_space.bar[bar_index].size;
-		if (lo) {
-			new = rounddown(new, size);
-		} else {
-			u32 val = vgpu_cfg_space(vgpu)[rounddown(offset, 8)];
-			/* for 32bit mode bar it returns all-0 in upper 32
-			 * bit, for 64bit mode bar it will calculate the
-			 * size with lower 32bit and return the corresponding
-			 * value
-			 */
-			if (val & PCI_BASE_ADDRESS_MEM_TYPE_64)
-				new &= (~(size-1)) >> 32;
-			else
-				new = 0;
-		}
+	if (new == 0xffffffff) {
+		switch (offset) {
+		case PCI_BASE_ADDRESS_0:
+		case PCI_BASE_ADDRESS_1:
+			size = ~(bars[INTEL_GVT_PCI_BAR_GTTMMIO].size -1);
+			intel_vgpu_write_pci_bar(vgpu, offset,
+						size >> (lo ? 0 : 32), lo);
 			/*
-		 * Unmapp & untrap the BAR, since guest hasn't configured a
+			 * Untrap the BAR, since guest hasn't configured a
 			 * valid GPA
 			 */
-		switch (bar_index) {
-		case INTEL_GVT_PCI_BAR_GTTMMIO:
 			ret = trap_gttmmio(vgpu, false);
 			break;
-		case INTEL_GVT_PCI_BAR_APERTURE:
+		case PCI_BASE_ADDRESS_2:
+		case PCI_BASE_ADDRESS_3:
+			size = ~(bars[INTEL_GVT_PCI_BAR_APERTURE].size -1);
+			intel_vgpu_write_pci_bar(vgpu, offset,
+						size >> (lo ? 0 : 32), lo);
 			ret = map_aperture(vgpu, false);
 			break;
+		default:
+			/* Unimplemented BARs */
+			intel_vgpu_write_pci_bar(vgpu, offset, 0x0, false);
 		}
-		intel_vgpu_write_pci_bar(vgpu, offset, new, lo);
 	} else {
+		switch (offset) {
+		case PCI_BASE_ADDRESS_0:
+		case PCI_BASE_ADDRESS_1:
 			/*
-		 * Unmapp & untrap the old BAR first, since guest has
+			 * Untrap the old BAR first, since guest has
 			 * re-configured the BAR
 			 */
-		switch (bar_index) {
-		case INTEL_GVT_PCI_BAR_GTTMMIO:
-			ret = trap_gttmmio(vgpu, false);
-			break;
-		case INTEL_GVT_PCI_BAR_APERTURE:
-			ret = map_aperture(vgpu, false);
-			break;
-		}
+			trap_gttmmio(vgpu, false);
 			intel_vgpu_write_pci_bar(vgpu, offset, new, lo);
-		/* Track the new BAR */
-		if (mmio_enabled) {
-			switch (bar_index) {
-			case INTEL_GVT_PCI_BAR_GTTMMIO:
-				ret = trap_gttmmio(vgpu, true);
+			ret = trap_gttmmio(vgpu, mmio_enabled);
 			break;
-			case INTEL_GVT_PCI_BAR_APERTURE:
-				ret = map_aperture(vgpu, true);
+		case PCI_BASE_ADDRESS_2:
+		case PCI_BASE_ADDRESS_3:
+			map_aperture(vgpu, false);
+			intel_vgpu_write_pci_bar(vgpu, offset, new, lo);
+			ret = map_aperture(vgpu, mmio_enabled);
 			break;
-			}
+		default:
+			intel_vgpu_write_pci_bar(vgpu, offset, new, lo);
 		}
 	}
 	return ret;
@@ -299,10 +286,7 @@ int intel_vgpu_emulate_cfg_write(struct intel_vgpu *vgpu, unsigned int offset,
 	}
 
 	switch (rounddown(offset, 4)) {
-	case PCI_BASE_ADDRESS_0:
-	case PCI_BASE_ADDRESS_1:
-	case PCI_BASE_ADDRESS_2:
-	case PCI_BASE_ADDRESS_3:
+	case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_5:
 		if (WARN_ON(!IS_ALIGNED(offset, 4)))
 			return -EINVAL;
 		return emulate_pci_bar_write(vgpu, offset, p_data, bytes);
@@ -344,7 +328,6 @@ void intel_vgpu_init_cfg_space(struct intel_vgpu *vgpu,
 	struct intel_gvt *gvt = vgpu->gvt;
 	const struct intel_gvt_device_info *info = &gvt->device_info;
 	u16 *gmch_ctl;
-	int i;
 
 	memcpy(vgpu_cfg_space(vgpu), gvt->firmware.cfg_space,
 	       info->cfg_space_size);
@@ -371,13 +354,13 @@ void intel_vgpu_init_cfg_space(struct intel_vgpu *vgpu,
 	 */
 	memset(vgpu_cfg_space(vgpu) + PCI_BASE_ADDRESS_1, 0, 4);
 	memset(vgpu_cfg_space(vgpu) + PCI_BASE_ADDRESS_3, 0, 4);
+	memset(vgpu_cfg_space(vgpu) + PCI_BASE_ADDRESS_4, 0, 8);
 	memset(vgpu_cfg_space(vgpu) + INTEL_GVT_PCI_OPREGION, 0, 4);
 
-	for (i = 0; i < INTEL_GVT_MAX_BAR_NUM; i++) {
-		vgpu->cfg_space.bar[i].size = pci_resource_len(
-					      gvt->dev_priv->drm.pdev, i * 2);
-		vgpu->cfg_space.bar[i].tracked = false;
-	}
+	vgpu->cfg_space.bar[INTEL_GVT_PCI_BAR_GTTMMIO].size =
+				pci_resource_len(gvt->dev_priv->drm.pdev, 0);
+	vgpu->cfg_space.bar[INTEL_GVT_PCI_BAR_APERTURE].size =
+				pci_resource_len(gvt->dev_priv->drm.pdev, 2);
 }
 
 /**

drivers/gpu/drm/i915/i915_irq.c

@@ -839,7 +839,6 @@ static bool i915_get_crtc_scanoutpos(struct drm_device *dev, unsigned int pipe,
 								pipe);
 	int position;
 	int vbl_start, vbl_end, hsync_start, htotal, vtotal;
-	bool in_vbl = true;
 	unsigned long irqflags;
 
 	if (WARN_ON(!mode->crtc_clock)) {
@@ -922,8 +921,6 @@ static bool i915_get_crtc_scanoutpos(struct drm_device *dev, unsigned int pipe,
 
 	spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
 
-	in_vbl = position >= vbl_start && position < vbl_end;
-
 	/*
 	 * While in vblank, position will be negative
 	 * counting up towards 0 at vbl_end. And outside

drivers/gpu/drm/i915/intel_display.c

@@ -14030,7 +14030,7 @@ static int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
 
 		if (mode_cmd->handles[i] != mode_cmd->handles[0]) {
 			DRM_DEBUG_KMS("bad plane %d handle\n", i);
-			return -EINVAL;
+			goto err;
 		}
 
 		stride_alignment = intel_fb_stride_alignment(fb, i);

drivers/gpu/drm/i915/intel_dsi.c

@@ -892,8 +892,6 @@ static void intel_dsi_disable(struct intel_encoder *encoder,
 			      struct intel_crtc_state *old_crtc_state,
 			      struct drm_connector_state *old_conn_state)
 {
-	struct drm_device *dev = encoder->base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
 	enum port port;
 
@@ -902,15 +900,6 @@ static void intel_dsi_disable(struct intel_encoder *encoder,
 	intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_BACKLIGHT_OFF);
 	intel_panel_disable_backlight(old_conn_state);
 
-	/*
-	 * Disable Device ready before the port shutdown in order
-	 * to avoid split screen
-	 */
-	if (IS_BROXTON(dev_priv)) {
-		for_each_dsi_port(port, intel_dsi->ports)
-			I915_WRITE(MIPI_DEVICE_READY(port), 0);
-	}
-
 	/*
 	 * According to the spec we should send SHUTDOWN before
 	 * MIPI_SEQ_DISPLAY_OFF only for v3+ VBTs, but field testing

drivers/gpu/drm/i915/intel_panel.c

@@ -1699,6 +1699,8 @@ bxt_setup_backlight(struct intel_connector *connector, enum pipe unused)
 	if (!panel->backlight.max)
 		return -ENODEV;
 
+	panel->backlight.min = get_backlight_min_vbt(connector);
+
 	val = bxt_get_backlight(connector);
 	val = intel_panel_compute_brightness(connector, val);
 	panel->backlight.level = clamp(val, panel->backlight.min,
@@ -1735,6 +1737,8 @@ cnp_setup_backlight(struct intel_connector *connector, enum pipe unused)
 	if (!panel->backlight.max)
 		return -ENODEV;
 
+	panel->backlight.min = get_backlight_min_vbt(connector);
+
 	val = bxt_get_backlight(connector);
 	val = intel_panel_compute_brightness(connector, val);
 	panel->backlight.level = clamp(val, panel->backlight.min,