Merge bk://kernel.bkbits.net/jgarzik/i810-audio-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

sound/oss/i810_audio.c

@@ -99,9 +99,12 @@
 #include <linux/spinlock.h>
 #include <linux/smp_lock.h>
 #include <linux/ac97_codec.h>
+#include <linux/bitops.h>
 #include <asm/uaccess.h>
 #include <asm/hardirq.h>
 
+#define DRIVER_VERSION "1.00"
+
 #ifndef PCI_DEVICE_ID_INTEL_82801
 #define PCI_DEVICE_ID_INTEL_82801	0x2415
 #endif
@@ -148,6 +151,9 @@
 #define PCI_DEVICE_ID_AMD_8111_AC97	0x746d
 #endif
 
+#define MODULOP2(a, b) ((a) & ((b) - 1))
+#define MASKP2(a, b) ((a) & ~((b) - 1))
+
 static int ftsodell;
 static int strict_clocking;
 static unsigned int clocking;
@@ -209,6 +215,7 @@ struct i810_channel
 
 #define ENUM_ENGINE(PRE,DIG) 									\
 enum {												\
+	PRE##_BASE =	0x##DIG##0,		/* Base Address */				\
 	PRE##_BDBAR =	0x##DIG##0,		/* Buffer Descriptor list Base Address */	\
 	PRE##_CIV =	0x##DIG##4,		/* Current Index Value */			\
 	PRE##_LVI =	0x##DIG##5,		/* Last Valid Index */				\
@@ -256,8 +263,6 @@ enum {
 #define INT_GPI		(1<<0)
 #define INT_MASK (INT_SEC|INT_PRI|INT_MC|INT_PO|INT_PI|INT_MO|INT_NI|INT_GPI)
 
-#define DRIVER_VERSION "0.24"
-
 /* magic numbers to protect our data structures */
 #define I810_CARD_MAGIC		0x5072696E /* "Prin" */
 #define I810_STATE_MAGIC	0x63657373 /* "cess" */
@@ -491,8 +496,12 @@ struct i810_card {
 /* extract register offset from codec struct */
 #define IO_REG_OFF(codec) (((struct i810_card *) codec->private_data)->ac97_id_map[codec->id])
 
+#define GET_CIV(port) MODULOP2(inb((port) + OFF_CIV), SG_LEN)
+#define GET_LVI(port) MODULOP2(inb((port) + OFF_LVI), SG_LEN)
+
 /* set LVI from CIV */
-#define CIV_TO_LVI(port, off) outb((inb(port+OFF_CIV)+off) & 31, port+OFF_LVI)
+#define CIV_TO_LVI(port, off) \
+	outb(MODULOP2(GET_CIV((port)) + (off), SG_LEN), (port) + OFF_LVI)
 
 static struct i810_card *devs = NULL;
 
@@ -762,7 +771,7 @@ static inline unsigned i810_get_dma_addr(struct i810_state *state, int rec)
 		port_picb = port + OFF_PICB;
 
 	do {
-		civ = inb(port+OFF_CIV) & 31;
+		civ = GET_CIV(port);
 		offset = inw(port_picb);
 		/* Must have a delay here! */ 
 		if(offset == 0)
@@ -782,7 +791,7 @@ static inline unsigned i810_get_dma_addr(struct i810_state *state, int rec)
 		 * that we won't have to worry about the chip still being
 		 * out of sync with reality ;-)
 		 */
-	} while (civ != (inb(port+OFF_CIV) & 31) || offset != inw(port_picb));
+	} while (civ != GET_CIV(port) || offset != inw(port_picb));
 		 
 	return (((civ + 1) * dmabuf->fragsize - (bytes * offset))
 		% dmabuf->dmasize);
@@ -992,6 +1001,7 @@ static int prog_dmabuf(struct i810_state *state, unsigned rec)
 	dmabuf->numfrag = SG_LEN;
 	dmabuf->fragsize = dmabuf->dmasize/dmabuf->numfrag;
 	dmabuf->fragsamples = dmabuf->fragsize >> 1;
+	dmabuf->fragshift = ffs(dmabuf->fragsize) - 1;
 	dmabuf->userfragsize = dmabuf->ossfragsize;
 	dmabuf->userfrags = dmabuf->dmasize/dmabuf->ossfragsize;
 
@@ -999,16 +1009,12 @@ static int prog_dmabuf(struct i810_state *state, unsigned rec)
 
 	if(dmabuf->ossmaxfrags == 4) {
 		fragint = 8;
-		dmabuf->fragshift = 2;
 	} else if (dmabuf->ossmaxfrags == 8) {
 		fragint = 4;
-		dmabuf->fragshift = 3;
 	} else if (dmabuf->ossmaxfrags == 16) {
 		fragint = 2;
-		dmabuf->fragshift = 4;
 	} else {
 		fragint = 1;
-		dmabuf->fragshift = 5;
 	}
 	/*
 	 *	Now set up the ring 
@@ -1072,41 +1078,41 @@ static void __i810_update_lvi(struct i810_state *state, int rec)
 {
 	struct dmabuf *dmabuf = &state->dmabuf;
 	int x, port;
-	
+	int trigger;
+	int count, fragsize;
+	void (*start)(struct i810_state *);
+
+	count = dmabuf->count;
 	port = state->card->iobase;
-	if(rec)
+	if (rec) {
 		port += dmabuf->read_channel->port;
-	else
+		trigger = PCM_ENABLE_INPUT;
+		start = __start_adc;
+		count = dmabuf->dmasize - count;
+	} else {
 		port += dmabuf->write_channel->port;
+		trigger = PCM_ENABLE_OUTPUT;
+		start = __start_dac;
+	}
+
+	/* Do not process partial fragments. */
+	fragsize = dmabuf->fragsize;
+	if (count < fragsize)
+		return;
 
-	/* if we are currently stopped, then our CIV is actually set to our
-	 * *last* sg segment and we are ready to wrap to the next.  However,
-	 * if we set our LVI to the last sg segment, then it won't wrap to
-	 * the next sg segment, it won't even get a start.  So, instead, when
-	 * we are stopped, we set both the LVI value and also we increment
-	 * the CIV value to the next sg segment to be played so that when
-	 * we call start_{dac,adc}, things will operate properly
-	 */
 	if (!dmabuf->enable && dmabuf->ready) {
-		if(rec && dmabuf->count < dmabuf->dmasize &&
-		   (dmabuf->trigger & PCM_ENABLE_INPUT))
-		{
-			CIV_TO_LVI(port, 1);
-			__start_adc(state);
-			while( !(inb(port + OFF_CR) & ((1<<4) | (1<<2))) ) ;
-		} else if (!rec && dmabuf->count &&
-			   (dmabuf->trigger & PCM_ENABLE_OUTPUT))
-		{
-			CIV_TO_LVI(port, 1);
-			__start_dac(state);
-			while( !(inb(port + OFF_CR) & ((1<<4) | (1<<2))) ) ;
-		}
+		if (!(dmabuf->trigger & trigger))
+			return;
+
+		start(state);
+		while (!(inb(port + OFF_CR) & ((1<<4) | (1<<2))))
+			;
 	}
 
-	/* swptr - 1 is the tail of our transfer */
-	x = (dmabuf->dmasize + dmabuf->swptr - 1) % dmabuf->dmasize;
-	x /= dmabuf->fragsize;
-	outb(x, port+OFF_LVI);
+	/* MASKP2(swptr, fragsize) - 1 is the tail of our transfer */
+	x = MODULOP2(MASKP2(dmabuf->swptr, fragsize) - 1, dmabuf->dmasize);
+	x >>= dmabuf->fragshift;
+	outb(x, port + OFF_LVI);
 }
 
 static void i810_update_lvi(struct i810_state *state, int rec)
@@ -1126,13 +1132,17 @@ static void i810_update_ptr(struct i810_state *state)
 {
 	struct dmabuf *dmabuf = &state->dmabuf;
 	unsigned hwptr;
+	unsigned fragmask, dmamask;
 	int diff;
 
-	/* error handling and process wake up for DAC */
+	fragmask = MASKP2(~0, dmabuf->fragsize);
+	dmamask = MODULOP2(~0, dmabuf->dmasize);
+
+	/* error handling and process wake up for ADC */
 	if (dmabuf->enable == ADC_RUNNING) {
 		/* update hardware pointer */
-		hwptr = i810_get_dma_addr(state, 1);
-		diff = (dmabuf->dmasize + hwptr - dmabuf->hwptr) % dmabuf->dmasize;
+		hwptr = i810_get_dma_addr(state, 1) & fragmask;
+		diff = (hwptr - dmabuf->hwptr) & dmamask;
 #if defined(DEBUG_INTERRUPTS) || defined(DEBUG_MMAP)
 		printk("ADC HWP %d,%d,%d\n", hwptr, dmabuf->hwptr, diff);
 #endif
@@ -1144,20 +1154,20 @@ static void i810_update_ptr(struct i810_state *state)
 			/* this is normal for the end of a read */
 			/* only give an error if we went past the */
 			/* last valid sg entry */
-			if((inb(state->card->iobase + PI_CIV) & 31) !=
-			   (inb(state->card->iobase + PI_LVI) & 31)) {
+			if (GET_CIV(state->card->iobase + PI_BASE) !=
+			    GET_LVI(state->card->iobase + PI_BASE)) {
 				printk(KERN_WARNING "i810_audio: DMA overrun on read\n");
 				dmabuf->error++;
 			}
 		}
-		if (dmabuf->count > dmabuf->userfragsize)
+		if (diff)
 			wake_up(&dmabuf->wait);
 	}
 	/* error handling and process wake up for DAC */
 	if (dmabuf->enable == DAC_RUNNING) {
 		/* update hardware pointer */
-		hwptr = i810_get_dma_addr(state, 0);
-		diff = (dmabuf->dmasize + hwptr - dmabuf->hwptr) % dmabuf->dmasize;
+		hwptr = i810_get_dma_addr(state, 0) & fragmask;
+		diff = (hwptr - dmabuf->hwptr) & dmamask;
 #if defined(DEBUG_INTERRUPTS) || defined(DEBUG_MMAP)
 		printk("DAC HWP %d,%d,%d\n", hwptr, dmabuf->hwptr, diff);
 #endif
@@ -1169,18 +1179,18 @@ static void i810_update_ptr(struct i810_state *state)
 			/* this is normal for the end of a write */
 			/* only give an error if we went past the */
 			/* last valid sg entry */
-			if((inb(state->card->iobase + PO_CIV) & 31) !=
-			   (inb(state->card->iobase + PO_LVI) & 31)) {
+			if (GET_CIV(state->card->iobase + PO_BASE) !=
+			    GET_LVI(state->card->iobase + PO_BASE)) {
 				printk(KERN_WARNING "i810_audio: DMA overrun on write\n");
 				printk("i810_audio: CIV %d, LVI %d, hwptr %x, "
 					"count %d\n",
-					inb(state->card->iobase + PO_CIV) & 31,
-					inb(state->card->iobase + PO_LVI) & 31,
+					GET_CIV(state->card->iobase + PO_BASE),
+					GET_LVI(state->card->iobase + PO_BASE),
 					dmabuf->hwptr, dmabuf->count);
 				dmabuf->error++;
 			}
 		}
-		if (dmabuf->count < (dmabuf->dmasize-dmabuf->userfragsize))
+		if (diff)
 			wake_up(&dmabuf->wait);
 	}
 }
@@ -1197,7 +1207,6 @@ static inline int i810_get_free_write_space(struct i810_state *state)
 		dmabuf->swptr = dmabuf->hwptr;
 	}
 	free = dmabuf->dmasize - dmabuf->count;
-	free -= (dmabuf->hwptr % dmabuf->fragsize);
 	if(free < 0)
 		return(0);
 	return(free);
@@ -1215,12 +1224,27 @@ static inline int i810_get_available_read_data(struct i810_state *state)
 		dmabuf->swptr = dmabuf->hwptr;
 	}
 	avail = dmabuf->count;
-	avail -= (dmabuf->hwptr % dmabuf->fragsize);
 	if(avail < 0)
 		return(0);
 	return(avail);
 }
 
+static inline void fill_partial_frag(struct dmabuf *dmabuf)
+{
+	unsigned fragsize;
+	unsigned swptr, len;
+
+	fragsize = dmabuf->fragsize;
+	swptr = dmabuf->swptr;
+	len = fragsize - MODULOP2(dmabuf->swptr, fragsize);
+	if (len == fragsize)
+		return;
+
+	memset(dmabuf->rawbuf + swptr, '\0', len);
+	dmabuf->swptr = MODULOP2(swptr + len, dmabuf->dmasize);
+	dmabuf->count += len;
+}
+
 static int drain_dac(struct i810_state *state, int signals_allowed)
 {
 	DECLARE_WAITQUEUE(wait, current);
@@ -1235,30 +1259,28 @@ static int drain_dac(struct i810_state *state, int signals_allowed)
 		stop_dac(state);
 		return 0;
 	}
+
+	spin_lock_irqsave(&state->card->lock, flags);
+
+	fill_partial_frag(dmabuf);
+
+	/* 
+	 * This will make sure that our LVI is correct, that our
+	 * pointer is updated, and that the DAC is running.  We
+	 * have to force the setting of dmabuf->trigger to avoid
+	 * any possible deadlocks.
+	 */
+	dmabuf->trigger = PCM_ENABLE_OUTPUT;
+	__i810_update_lvi(state, 0);
+
+	spin_unlock_irqrestore(&state->card->lock, flags);
+
 	add_wait_queue(&dmabuf->wait, &wait);
 	for (;;) {
 
 		spin_lock_irqsave(&state->card->lock, flags);
 		i810_update_ptr(state);
 		count = dmabuf->count;
-		spin_unlock_irqrestore(&state->card->lock, flags);
-
-		if (count <= 0)
-			break;
-
-		/* 
-		 * This will make sure that our LVI is correct, that our
-		 * pointer is updated, and that the DAC is running.  We
-		 * have to force the setting of dmabuf->trigger to avoid
-		 * any possible deadlocks.
-		 */
-		if(!dmabuf->enable) {
-			dmabuf->trigger = PCM_ENABLE_OUTPUT;
-			i810_update_lvi(state,0);
-		}
-                if (signal_pending(current) && signals_allowed) {
-                        break;
-                }
 
 		/* It seems that we have to set the current state to
 		 * TASK_INTERRUPTIBLE every time to make the process
@@ -1269,7 +1291,17 @@ static int drain_dac(struct i810_state *state, int signals_allowed)
 		 * instead of actually sleeping and waiting for an
 		 * interrupt to wake us up!
 		 */
-		set_current_state(TASK_INTERRUPTIBLE);
+		__set_current_state(signals_allowed ?
+				    TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
+		spin_unlock_irqrestore(&state->card->lock, flags);
+
+		if (count <= 0)
+			break;
+
+                if (signal_pending(current) && signals_allowed) {
+                        break;
+                }
+
 		/*
 		 * set the timeout to significantly longer than it *should*
 		 * take for the DAC to drain the DMA buffer
@@ -1350,11 +1382,10 @@ static void i810_channel_interrupt(struct i810_card *card)
 			if(status & DMA_INT_DCH)
 				printk("DCH -");
 #endif
-			if(dmabuf->enable & DAC_RUNNING)
-				count = dmabuf->count;
-			else
-				count = dmabuf->dmasize - dmabuf->count;
-			if(count > 0) {
+			count = dmabuf->count;
+			if(dmabuf->enable & ADC_RUNNING)
+				count = dmabuf->dmasize - count;
+			if (count >= (int)dmabuf->fragsize) {
 				outb(inb(port+OFF_CR) | 1, port+OFF_CR);
 #ifdef DEBUG_INTERRUPTS
 				printk(" CONTINUE ");
@@ -1417,6 +1448,7 @@ static ssize_t i810_read(struct file *file, char *buffer, size_t count, loff_t *
 	unsigned long flags;
 	unsigned int swptr;
 	int cnt;
+	int pending;
         DECLARE_WAITQUEUE(waita, current);
 
 #ifdef DEBUG2
@@ -1442,6 +1474,8 @@ static ssize_t i810_read(struct file *file, char *buffer, size_t count, loff_t *
 		return -EFAULT;
 	ret = 0;
 
+	pending = 0;
+
         add_wait_queue(&dmabuf->wait, &waita);
 	while (count > 0) {
 		set_current_state(TASK_INTERRUPTIBLE);
@@ -1455,8 +1489,8 @@ static ssize_t i810_read(struct file *file, char *buffer, size_t count, loff_t *
                         }
                         continue;
                 }
-		swptr = dmabuf->swptr;
 		cnt = i810_get_available_read_data(state);
+		swptr = dmabuf->swptr;
 		// this is to make the copy_to_user simpler below
 		if(cnt > (dmabuf->dmasize - swptr))
 			cnt = dmabuf->dmasize - swptr;
@@ -1464,15 +1498,6 @@ static ssize_t i810_read(struct file *file, char *buffer, size_t count, loff_t *
 
 		if (cnt > count)
 			cnt = count;
-		/* Lop off the last two bits to force the code to always
-		 * write in full samples.  This keeps software that sets
-		 * O_NONBLOCK but doesn't check the return value of the
-		 * write call from getting things out of state where they
-		 * think a full 4 byte sample was written when really only
-		 * a portion was, resulting in odd sound and stereo
-		 * hysteresis.
-		 */
-		cnt &= ~0x3;
 		if (cnt <= 0) {
 			unsigned long tmo;
 			/*
@@ -1526,7 +1551,7 @@ static ssize_t i810_read(struct file *file, char *buffer, size_t count, loff_t *
 			goto done;
 		}
 
-		swptr = (swptr + cnt) % dmabuf->dmasize;
+		swptr = MODULOP2(swptr + cnt, dmabuf->dmasize);
 
 		spin_lock_irqsave(&card->lock, flags);
 
@@ -1535,7 +1560,7 @@ static ssize_t i810_read(struct file *file, char *buffer, size_t count, loff_t *
                         continue;
                 }
 		dmabuf->swptr = swptr;
-		dmabuf->count -= cnt;
+		pending = dmabuf->count -= cnt;
 		spin_unlock_irqrestore(&card->lock, flags);
 
 		count -= cnt;
@@ -1543,7 +1568,9 @@ static ssize_t i810_read(struct file *file, char *buffer, size_t count, loff_t *
 		ret += cnt;
 	}
  done:
-	i810_update_lvi(state,1);
+	pending = dmabuf->dmasize - pending;
+	if (dmabuf->enable || pending >= dmabuf->userfragsize)
+		i810_update_lvi(state, 1);
         set_current_state(TASK_RUNNING);
         remove_wait_queue(&dmabuf->wait, &waita);
 
@@ -1560,7 +1587,8 @@ static ssize_t i810_write(struct file *file, const char *buffer, size_t count, l
 	ssize_t ret;
 	unsigned long flags;
 	unsigned int swptr = 0;
-	int cnt, x;
+	int pending;
+	int cnt;
         DECLARE_WAITQUEUE(waita, current);
 
 #ifdef DEBUG2
@@ -1585,6 +1613,8 @@ static ssize_t i810_write(struct file *file, const char *buffer, size_t count, l
 		return -EFAULT;
 	ret = 0;
 
+	pending = 0;
+
         add_wait_queue(&dmabuf->wait, &waita);
 	while (count > 0) {
 		set_current_state(TASK_INTERRUPTIBLE);
@@ -1599,8 +1629,8 @@ static ssize_t i810_write(struct file *file, const char *buffer, size_t count, l
                         continue;
                 }
 
-		swptr = dmabuf->swptr;
 		cnt = i810_get_free_write_space(state);
+		swptr = dmabuf->swptr;
 		/* Bound the maximum size to how much we can copy to the
 		 * dma buffer before we hit the end.  If we have more to
 		 * copy then it will get done in a second pass of this
@@ -1615,15 +1645,6 @@ static ssize_t i810_write(struct file *file, const char *buffer, size_t count, l
 #endif
 		if (cnt > count)
 			cnt = count;
-		/* Lop off the last two bits to force the code to always
-		 * write in full samples.  This keeps software that sets
-		 * O_NONBLOCK but doesn't check the return value of the
-		 * write call from getting things out of state where they
-		 * think a full 4 byte sample was written when really only
-		 * a portion was, resulting in odd sound and stereo
-		 * hysteresis.
-		 */
-		cnt &= ~0x3;
 		if (cnt <= 0) {
 			unsigned long tmo;
 			// There is data waiting to be played
@@ -1668,7 +1689,7 @@ static ssize_t i810_write(struct file *file, const char *buffer, size_t count, l
 			goto ret;
 		}
 
-		swptr = (swptr + cnt) % dmabuf->dmasize;
+		swptr = MODULOP2(swptr + cnt, dmabuf->dmasize);
 
 		spin_lock_irqsave(&state->card->lock, flags);
                 if (PM_SUSPENDED(card)) {
@@ -1677,19 +1698,16 @@ static ssize_t i810_write(struct file *file, const char *buffer, size_t count, l
                 }
 
 		dmabuf->swptr = swptr;
-		dmabuf->count += cnt;
+		pending = dmabuf->count += cnt;
 
 		count -= cnt;
 		buffer += cnt;
 		ret += cnt;
 		spin_unlock_irqrestore(&state->card->lock, flags);
 	}
-	if (swptr % dmabuf->fragsize) {
-		x = dmabuf->fragsize - (swptr % dmabuf->fragsize);
-		memset(dmabuf->rawbuf + swptr, '\0', x);
-	}
 ret:
-	i810_update_lvi(state,0);
+	if (dmabuf->enable || pending >= dmabuf->userfragsize)
+		i810_update_lvi(state, 0);
         set_current_state(TASK_RUNNING);
         remove_wait_queue(&dmabuf->wait, &waita);
 
@@ -2179,6 +2197,13 @@ static int i810_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 #if defined(DEBUG) || defined(DEBUG_MMAP)
 		printk("SNDCTL_DSP_SETTRIGGER 0x%x\n", val);
 #endif
+		/* silently ignore invalid PCM_ENABLE_xxx bits,
+		 * like the other drivers do
+		 */
+		if (!(file->f_mode & FMODE_READ ))
+			val &= ~PCM_ENABLE_INPUT;
+		if (!(file->f_mode & FMODE_WRITE ))
+			val &= ~PCM_ENABLE_OUTPUT;
 		if((file->f_mode & FMODE_READ) && !(val & PCM_ENABLE_INPUT) && dmabuf->enable == ADC_RUNNING) {
 			stop_adc(state);
 		}
@@ -2186,7 +2211,7 @@ static int i810_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			stop_dac(state);
 		}
 		dmabuf->trigger = val;
-		if((file->f_mode & FMODE_WRITE) && (val & PCM_ENABLE_OUTPUT) && !(dmabuf->enable & DAC_RUNNING)) {
+		if((val & PCM_ENABLE_OUTPUT) && !(dmabuf->enable & DAC_RUNNING)) {
 			if (!dmabuf->write_channel) {
 				dmabuf->ready = 0;
 				dmabuf->write_channel = state->card->alloc_pcm_channel(state->card);
@@ -2202,12 +2227,12 @@ static int i810_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 				dmabuf->swptr = dmabuf->hwptr;
 				dmabuf->count = i810_get_free_write_space(state);
 				dmabuf->swptr = (dmabuf->swptr + dmabuf->count) % dmabuf->dmasize;
-				__i810_update_lvi(state, 0);
 				spin_unlock_irqrestore(&state->card->lock, flags);
-			} else
-				start_dac(state);
+			}
+			i810_update_lvi(state, 0);
+			start_dac(state);
 		}
-		if((file->f_mode & FMODE_READ) && (val & PCM_ENABLE_INPUT) && !(dmabuf->enable & ADC_RUNNING)) {
+		if((val & PCM_ENABLE_INPUT) && !(dmabuf->enable & ADC_RUNNING)) {
 			if (!dmabuf->read_channel) {
 				dmabuf->ready = 0;
 				dmabuf->read_channel = state->card->alloc_rec_pcm_channel(state->card);
@@ -3065,7 +3090,7 @@ static void __devinit i810_configure_clocking (void)
 			goto config_out;
 		}
 		dmabuf->count = dmabuf->dmasize;
-		CIV_TO_LVI(card->iobase+dmabuf->write_channel->port, 31);
+		CIV_TO_LVI(card->iobase+dmabuf->write_channel->port, -1);
 		local_irq_save(flags);
 		start_dac(state);
 		offset = i810_get_dma_addr(state, 0);