Commit c2bfb100 authored by Marcel Holtmann's avatar Marcel Holtmann

Bluetooth: btusb: Add option for Broadcom protocol support

With the generic Broadcom Bluetooth support module, it is possible to
turn support for firmware and patchram download into an optional
feature.

To keep backwards compatibility with previous kernel configurations,
the new option defaults to enabled.
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: default avatarJohan Hedberg <johan.hedberg@intel.com>
parent 1c8ba6d0
...@@ -9,7 +9,6 @@ config BT_BCM ...@@ -9,7 +9,6 @@ config BT_BCM
config BT_HCIBTUSB config BT_HCIBTUSB
tristate "HCI USB driver" tristate "HCI USB driver"
depends on USB depends on USB
select BT_BCM
help help
Bluetooth HCI USB driver. Bluetooth HCI USB driver.
This driver is required if you want to use Bluetooth devices with This driver is required if you want to use Bluetooth devices with
...@@ -18,6 +17,17 @@ config BT_HCIBTUSB ...@@ -18,6 +17,17 @@ config BT_HCIBTUSB
Say Y here to compile support for Bluetooth USB devices into the Say Y here to compile support for Bluetooth USB devices into the
kernel or say M to compile it as module (btusb). kernel or say M to compile it as module (btusb).
config BT_HCIBTUSB_BCM
bool "Broadcom protocol support"
depends on BT_HCIBTUSB
select BT_BCM
default y
help
The Broadcom protocol support enables firmware and patchram
download support for Broadcom Bluetooth controllers.
Say Y here to compile support for Broadcom protocol.
config BT_HCIBTSDIO config BT_HCIBTSDIO
tristate "HCI SDIO driver" tristate "HCI SDIO driver"
depends on MMC depends on MMC
......
...@@ -24,7 +24,6 @@ ...@@ -24,7 +24,6 @@
#include <linux/module.h> #include <linux/module.h>
#include <linux/usb.h> #include <linux/usb.h>
#include <linux/firmware.h> #include <linux/firmware.h>
#include <asm/unaligned.h>
#include <net/bluetooth/bluetooth.h> #include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h> #include <net/bluetooth/hci_core.h>
...@@ -2403,210 +2402,6 @@ static int btusb_set_bdaddr_marvell(struct hci_dev *hdev, ...@@ -2403,210 +2402,6 @@ static int btusb_set_bdaddr_marvell(struct hci_dev *hdev,
return 0; return 0;
} }
static const struct {
u16 subver;
const char *name;
} bcm_subver_table[] = {
{ 0x210b, "BCM43142A0" }, /* 001.001.011 */
{ 0x2112, "BCM4314A0" }, /* 001.001.018 */
{ 0x2118, "BCM20702A0" }, /* 001.001.024 */
{ 0x2126, "BCM4335A0" }, /* 001.001.038 */
{ 0x220e, "BCM20702A1" }, /* 001.002.014 */
{ 0x230f, "BCM4354A2" }, /* 001.003.015 */
{ 0x4106, "BCM4335B0" }, /* 002.001.006 */
{ 0x410e, "BCM20702B0" }, /* 002.001.014 */
{ 0x6109, "BCM4335C0" }, /* 003.001.009 */
{ 0x610c, "BCM4354" }, /* 003.001.012 */
{ }
};
static int btusb_setup_bcm_patchram(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct usb_device *udev = data->udev;
char fw_name[64];
const struct firmware *fw;
const u8 *fw_ptr;
size_t fw_size;
const struct hci_command_hdr *cmd;
const u8 *cmd_param;
u16 opcode, subver, rev;
const char *hw_name = NULL;
struct sk_buff *skb;
struct hci_rp_read_local_version *ver;
long ret;
int i;
/* Reset */
skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
BT_ERR("%s: HCI_OP_RESET failed (%ld)", hdev->name, ret);
return ret;
}
kfree_skb(skb);
/* Read Local Version Info */
skb = btusb_read_local_version(hdev);
if (IS_ERR(skb))
return PTR_ERR(skb);
ver = (struct hci_rp_read_local_version *)skb->data;
rev = le16_to_cpu(ver->hci_rev);
subver = le16_to_cpu(ver->lmp_subver);
kfree_skb(skb);
/* Read Verbose Config Version Info */
skb = __hci_cmd_sync(hdev, 0xfc79, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
BT_ERR("%s: BCM: Read Verbose Version failed (%ld)",
hdev->name, ret);
return ret;
}
if (skb->len != 7) {
BT_ERR("%s: BCM: Read Verbose Version event length mismatch",
hdev->name);
kfree_skb(skb);
return -EIO;
}
BT_INFO("%s: BCM: chip id %u", hdev->name, skb->data[1]);
kfree_skb(skb);
for (i = 0; bcm_subver_table[i].name; i++) {
if (subver == bcm_subver_table[i].subver) {
hw_name = bcm_subver_table[i].name;
break;
}
}
BT_INFO("%s: %s (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name,
hw_name ? : "BCM", (subver & 0x7000) >> 13,
(subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
snprintf(fw_name, sizeof(fw_name), "brcm/%s-%4.4x-%4.4x.hcd",
hw_name ? : "BCM",
le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct));
ret = request_firmware(&fw, fw_name, &hdev->dev);
if (ret < 0) {
BT_INFO("%s: BCM: patch %s not found", hdev->name, fw_name);
return 0;
}
/* Start Download */
skb = __hci_cmd_sync(hdev, 0xfc2e, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
BT_ERR("%s: BCM: Download Minidrv command failed (%ld)",
hdev->name, ret);
goto reset_fw;
}
kfree_skb(skb);
/* 50 msec delay after Download Minidrv completes */
msleep(50);
fw_ptr = fw->data;
fw_size = fw->size;
while (fw_size >= sizeof(*cmd)) {
cmd = (struct hci_command_hdr *)fw_ptr;
fw_ptr += sizeof(*cmd);
fw_size -= sizeof(*cmd);
if (fw_size < cmd->plen) {
BT_ERR("%s: BCM: patch %s is corrupted",
hdev->name, fw_name);
ret = -EINVAL;
goto reset_fw;
}
cmd_param = fw_ptr;
fw_ptr += cmd->plen;
fw_size -= cmd->plen;
opcode = le16_to_cpu(cmd->opcode);
skb = __hci_cmd_sync(hdev, opcode, cmd->plen, cmd_param,
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
BT_ERR("%s: BCM: patch command %04x failed (%ld)",
hdev->name, opcode, ret);
goto reset_fw;
}
kfree_skb(skb);
}
/* 250 msec delay after Launch Ram completes */
msleep(250);
reset_fw:
/* Reset */
skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
BT_ERR("%s: HCI_OP_RESET failed (%ld)", hdev->name, ret);
goto done;
}
kfree_skb(skb);
/* Read Local Version Info */
skb = btusb_read_local_version(hdev);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
goto done;
}
ver = (struct hci_rp_read_local_version *)skb->data;
rev = le16_to_cpu(ver->hci_rev);
subver = le16_to_cpu(ver->lmp_subver);
kfree_skb(skb);
BT_INFO("%s: %s (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name,
hw_name ? : "BCM", (subver & 0x7000) >> 13,
(subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
btbcm_check_bdaddr(hdev);
done:
release_firmware(fw);
return ret;
}
static int btusb_setup_bcm_apple(struct hci_dev *hdev)
{
struct sk_buff *skb;
int err;
/* Read Verbose Config Version Info */
skb = __hci_cmd_sync(hdev, 0xfc79, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
err = PTR_ERR(skb);
BT_ERR("%s: BCM: Read Verbose Version failed (%d)",
hdev->name, err);
return err;
}
if (skb->len != 7) {
BT_ERR("%s: BCM: Read Verbose Version event length mismatch",
hdev->name);
kfree_skb(skb);
return -EIO;
}
BT_INFO("%s: BCM: chip id %u build %4.4u", hdev->name, skb->data[1],
get_unaligned_le16(skb->data + 5));
kfree_skb(skb);
return 0;
}
static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev, static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev,
const bdaddr_t *bdaddr) const bdaddr_t *bdaddr)
{ {
...@@ -3000,16 +2795,18 @@ static int btusb_probe(struct usb_interface *intf, ...@@ -3000,16 +2795,18 @@ static int btusb_probe(struct usb_interface *intf,
if (id->driver_info & BTUSB_BCM92035) if (id->driver_info & BTUSB_BCM92035)
hdev->setup = btusb_setup_bcm92035; hdev->setup = btusb_setup_bcm92035;
#ifdef CONFIG_BT_HCIBTUSB_BCM
if (id->driver_info & BTUSB_BCM_PATCHRAM) { if (id->driver_info & BTUSB_BCM_PATCHRAM) {
hdev->setup = btusb_setup_bcm_patchram; hdev->setup = btbcm_setup_patchram;
hdev->set_bdaddr = btbcm_set_bdaddr; hdev->set_bdaddr = btbcm_set_bdaddr;
set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
} }
if (id->driver_info & BTUSB_BCM_APPLE) { if (id->driver_info & BTUSB_BCM_APPLE) {
hdev->setup = btusb_setup_bcm_apple; hdev->setup = btbcm_setup_apple;
set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
} }
#endif
if (id->driver_info & BTUSB_INTEL) { if (id->driver_info & BTUSB_INTEL) {
hdev->setup = btusb_setup_intel; hdev->setup = btusb_setup_intel;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment