Commit c2f8a6ce authored by David S. Miller's avatar David S. Miller

Merge branch 'add-rmnet-driver'

Subash Abhinov Kasiviswanathan says:

====================
net: Add support for rmnet driver

This patch series adds support for the rmnet driver which is required to
support recent chipsets using Qualcomm Technologies, Inc. modems. The data
from hardware follows the multiplexing and aggregation protocol (MAP).

This driver can be used to register onto any physical network device in
IP mode. Physical transports include USB, HSIC, PCIe and IP accelerator.

rmnet driver helps to decode these packets and queue them to network
stack (and encode and transmit it to the physical device).

v1: Same as the RFC patch with some minor fixes for issues reported by
kbuild test robot.

v1->v2: Change datatypes and remove config IOCTL as mentioned by David.
Also fix checkpatch issues and remove some unused code.

v2->v3: Move location to drivers/net and rename to rmnet. Change the
userspace - netlink communication from custom netlink to rtnl_link_ops.
Refactor some code. Use a fixed config for ingress and egress.

v3->v4: Move location to drivers/net/ethernet/qualcomm/.
Fix comments from Stephen and Jiri -
Split the ether and arp type changes into seperate patches.
Remove debug and custom logging and switch to standard netdevice log.
Remove module parameters. Refactor and change some code style issues.

v4->v5: Rename some structs and variables. Move the initializer
before the for loop start. Put the arp type in correct sequence.

v5->v6: Fix comments from Dan -
Use the upper link API. As a result, remove all the refcounting logic.
Device refcount is explicitly held on real_dev on rx_handler
registration only. Modifiy the flow control struct. Remove the unused
ethernet mode handling.

v6->v7: Fix comments from David - Add newline to end of Makefile. Remove
inline from .c files. Move the module init/exit to rmnet config. Fix an
error reported by kbuild test robot for an unused file.

v7->v8: Use a smaller value for ETH_P_MAP as mentioned by David. Change
netdev_info to netdev_dbg as mentioned by Andew. Fix comments from
Stephen regarding netdev_priv and sparse related errors of using 0 as NULL

v8->v9: Fix comments from David - Remove the CFLAG rule. Change the way
rmnet devices are freed. Instead of using a workqueue to unregister devices
individually, go through the list and free all devices within the rtnl_lock().

v9->v10: Actually fix the locking as mentioned by David. The locking scheme is
mentioned in a comment in rmnet_config.c. Change comment near MAP type
definition as mentioned by Dan. Refactor some code.

v10->v11: Allow RMNET to compile as a module as mentioned by David
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 2c667d40 ceed73a2
1. Introduction
rmnet driver is used for supporting the Multiplexing and aggregation
Protocol (MAP). This protocol is used by all recent chipsets using Qualcomm
Technologies, Inc. modems.
This driver can be used to register onto any physical network device in
IP mode. Physical transports include USB, HSIC, PCIe and IP accelerator.
Multiplexing allows for creation of logical netdevices (rmnet devices) to
handle multiple private data networks (PDN) like a default internet, tethering,
multimedia messaging service (MMS) or IP media subsystem (IMS). Hardware sends
packets with MAP headers to rmnet. Based on the multiplexer id, rmnet
routes to the appropriate PDN after removing the MAP header.
Aggregation is required to achieve high data rates. This involves hardware
sending aggregated bunch of MAP frames. rmnet driver will de-aggregate
these MAP frames and send them to appropriate PDN's.
2. Packet format
a. MAP packet (data / control)
MAP header has the same endianness of the IP packet.
Packet format -
Bit 0 1 2-7 8 - 15 16 - 31
Function Command / Data Reserved Pad Multiplexer ID Payload length
Bit 32 - x
Function Raw Bytes
Command (1)/ Data (0) bit value is to indicate if the packet is a MAP command
or data packet. Control packet is used for transport level flow control. Data
packets are standard IP packets.
Reserved bits are usually zeroed out and to be ignored by receiver.
Padding is number of bytes to be added for 4 byte alignment if required by
hardware.
Multiplexer ID is to indicate the PDN on which data has to be sent.
Payload length includes the padding length but does not include MAP header
length.
b. MAP packet (command specific)
Bit 0 1 2-7 8 - 15 16 - 31
Function Command Reserved Pad Multiplexer ID Payload length
Bit 32 - 39 40 - 45 46 - 47 48 - 63
Function Command name Reserved Command Type Reserved
Bit 64 - 95
Function Transaction ID
Bit 96 - 127
Function Command data
Command 1 indicates disabling flow while 2 is enabling flow
Command types -
0 for MAP command request
1 is to acknowledge the receipt of a command
2 is for unsupported commands
3 is for error during processing of commands
c. Aggregation
Aggregation is multiple MAP packets (can be data or command) delivered to
rmnet in a single linear skb. rmnet will process the individual
packets and either ACK the MAP command or deliver the IP packet to the
network stack as needed
MAP header|IP Packet|Optional padding|MAP header|IP Packet|Optional padding....
MAP header|IP Packet|Optional padding|MAP header|Command Packet|Optional pad...
3. Userspace configuration
rmnet userspace configuration is done through netlink library librmnetctl
and command line utility rmnetcli. Utility is hosted in codeaurora forum git.
The driver uses rtnl_link_ops for communication.
https://source.codeaurora.org/quic/la/platform/vendor/qcom-opensource/dataservices/tree/rmnetctl
...@@ -59,4 +59,6 @@ config QCOM_EMAC ...@@ -59,4 +59,6 @@ config QCOM_EMAC
low power, Receive-Side Scaling (RSS), and IEEE 1588-2008 low power, Receive-Side Scaling (RSS), and IEEE 1588-2008
Precision Clock Synchronization Protocol. Precision Clock Synchronization Protocol.
source "drivers/net/ethernet/qualcomm/rmnet/Kconfig"
endif # NET_VENDOR_QUALCOMM endif # NET_VENDOR_QUALCOMM
...@@ -9,3 +9,5 @@ obj-$(CONFIG_QCA7000_UART) += qcauart.o ...@@ -9,3 +9,5 @@ obj-$(CONFIG_QCA7000_UART) += qcauart.o
qcauart-objs := qca_uart.o qcauart-objs := qca_uart.o
obj-y += emac/ obj-y += emac/
obj-$(CONFIG_RMNET) += rmnet/
#
# RMNET MAP driver
#
menuconfig RMNET
tristate "RmNet MAP driver"
default n
---help---
If you select this, you will enable the RMNET module which is used
for handling data in the multiplexing and aggregation protocol (MAP)
format in the embedded data path. RMNET devices can be attached to
any IP mode physical device.
#
# Makefile for the RMNET module
#
rmnet-y := rmnet_config.o
rmnet-y += rmnet_vnd.o
rmnet-y += rmnet_handlers.o
rmnet-y += rmnet_map_data.o
rmnet-y += rmnet_map_command.o
obj-$(CONFIG_RMNET) += rmnet.o
This diff is collapsed.
/* Copyright (c) 2013-2014, 2016-2017 The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* RMNET Data configuration engine
*
*/
#include <linux/skbuff.h>
#ifndef _RMNET_CONFIG_H_
#define _RMNET_CONFIG_H_
#define RMNET_MAX_LOGICAL_EP 255
#define RMNET_MAX_VND 32
/* Information about the next device to deliver the packet to.
* Exact usage of this parameter depends on the rmnet_mode.
*/
struct rmnet_endpoint {
u8 rmnet_mode;
u8 mux_id;
struct net_device *egress_dev;
};
/* One instance of this structure is instantiated for each real_dev associated
* with rmnet.
*/
struct rmnet_real_dev_info {
struct net_device *dev;
struct rmnet_endpoint local_ep;
struct rmnet_endpoint muxed_ep[RMNET_MAX_LOGICAL_EP];
u32 ingress_data_format;
u32 egress_data_format;
struct net_device *rmnet_devices[RMNET_MAX_VND];
u8 nr_rmnet_devs;
};
extern struct rtnl_link_ops rmnet_link_ops;
struct rmnet_priv {
struct rmnet_endpoint local_ep;
u8 mux_id;
};
struct rmnet_real_dev_info*
rmnet_get_real_dev_info(struct net_device *real_dev);
#endif /* _RMNET_CONFIG_H_ */
/* Copyright (c) 2013-2017, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* RMNET Data ingress/egress handler
*
*/
#include <linux/netdevice.h>
#include <linux/netdev_features.h>
#include "rmnet_private.h"
#include "rmnet_config.h"
#include "rmnet_vnd.h"
#include "rmnet_map.h"
#include "rmnet_handlers.h"
#define RMNET_IP_VERSION_4 0x40
#define RMNET_IP_VERSION_6 0x60
/* Helper Functions */
static void rmnet_set_skb_proto(struct sk_buff *skb)
{
switch (skb->data[0] & 0xF0) {
case RMNET_IP_VERSION_4:
skb->protocol = htons(ETH_P_IP);
break;
case RMNET_IP_VERSION_6:
skb->protocol = htons(ETH_P_IPV6);
break;
default:
skb->protocol = htons(ETH_P_MAP);
break;
}
}
/* Generic handler */
static rx_handler_result_t
rmnet_bridge_handler(struct sk_buff *skb, struct rmnet_endpoint *ep)
{
if (!ep->egress_dev)
kfree_skb(skb);
else
rmnet_egress_handler(skb, ep);
return RX_HANDLER_CONSUMED;
}
static rx_handler_result_t
rmnet_deliver_skb(struct sk_buff *skb, struct rmnet_endpoint *ep)
{
switch (ep->rmnet_mode) {
case RMNET_EPMODE_NONE:
return RX_HANDLER_PASS;
case RMNET_EPMODE_BRIDGE:
return rmnet_bridge_handler(skb, ep);
case RMNET_EPMODE_VND:
skb_reset_transport_header(skb);
skb_reset_network_header(skb);
rmnet_vnd_rx_fixup(skb, skb->dev);
skb->pkt_type = PACKET_HOST;
skb_set_mac_header(skb, 0);
netif_receive_skb(skb);
return RX_HANDLER_CONSUMED;
default:
kfree_skb(skb);
return RX_HANDLER_CONSUMED;
}
}
static rx_handler_result_t
rmnet_ingress_deliver_packet(struct sk_buff *skb,
struct rmnet_real_dev_info *r)
{
if (!r) {
kfree_skb(skb);
return RX_HANDLER_CONSUMED;
}
skb->dev = r->local_ep.egress_dev;
return rmnet_deliver_skb(skb, &r->local_ep);
}
/* MAP handler */
static rx_handler_result_t
__rmnet_map_ingress_handler(struct sk_buff *skb,
struct rmnet_real_dev_info *r)
{
struct rmnet_endpoint *ep;
u8 mux_id;
u16 len;
if (RMNET_MAP_GET_CD_BIT(skb)) {
if (r->ingress_data_format
& RMNET_INGRESS_FORMAT_MAP_COMMANDS)
return rmnet_map_command(skb, r);
kfree_skb(skb);
return RX_HANDLER_CONSUMED;
}
mux_id = RMNET_MAP_GET_MUX_ID(skb);
len = RMNET_MAP_GET_LENGTH(skb) - RMNET_MAP_GET_PAD(skb);
if (mux_id >= RMNET_MAX_LOGICAL_EP) {
kfree_skb(skb);
return RX_HANDLER_CONSUMED;
}
ep = &r->muxed_ep[mux_id];
if (r->ingress_data_format & RMNET_INGRESS_FORMAT_DEMUXING)
skb->dev = ep->egress_dev;
/* Subtract MAP header */
skb_pull(skb, sizeof(struct rmnet_map_header));
skb_trim(skb, len);
rmnet_set_skb_proto(skb);
return rmnet_deliver_skb(skb, ep);
}
static rx_handler_result_t
rmnet_map_ingress_handler(struct sk_buff *skb,
struct rmnet_real_dev_info *r)
{
struct sk_buff *skbn;
int rc;
if (r->ingress_data_format & RMNET_INGRESS_FORMAT_DEAGGREGATION) {
while ((skbn = rmnet_map_deaggregate(skb, r)) != NULL)
__rmnet_map_ingress_handler(skbn, r);
consume_skb(skb);
rc = RX_HANDLER_CONSUMED;
} else {
rc = __rmnet_map_ingress_handler(skb, r);
}
return rc;
}
static int rmnet_map_egress_handler(struct sk_buff *skb,
struct rmnet_real_dev_info *r,
struct rmnet_endpoint *ep,
struct net_device *orig_dev)
{
int required_headroom, additional_header_len;
struct rmnet_map_header *map_header;
additional_header_len = 0;
required_headroom = sizeof(struct rmnet_map_header);
if (skb_headroom(skb) < required_headroom) {
if (pskb_expand_head(skb, required_headroom, 0, GFP_KERNEL))
return RMNET_MAP_CONSUMED;
}
map_header = rmnet_map_add_map_header(skb, additional_header_len, 0);
if (!map_header)
return RMNET_MAP_CONSUMED;
if (r->egress_data_format & RMNET_EGRESS_FORMAT_MUXING) {
if (ep->mux_id == 0xff)
map_header->mux_id = 0;
else
map_header->mux_id = ep->mux_id;
}
skb->protocol = htons(ETH_P_MAP);
return RMNET_MAP_SUCCESS;
}
/* Ingress / Egress Entry Points */
/* Processes packet as per ingress data format for receiving device. Logical
* endpoint is determined from packet inspection. Packet is then sent to the
* egress device listed in the logical endpoint configuration.
*/
rx_handler_result_t rmnet_rx_handler(struct sk_buff **pskb)
{
struct rmnet_real_dev_info *r;
struct sk_buff *skb = *pskb;
struct net_device *dev;
int rc;
if (!skb)
return RX_HANDLER_CONSUMED;
dev = skb->dev;
r = rmnet_get_real_dev_info(dev);
if (r->ingress_data_format & RMNET_INGRESS_FORMAT_MAP) {
rc = rmnet_map_ingress_handler(skb, r);
} else {
switch (ntohs(skb->protocol)) {
case ETH_P_MAP:
if (r->local_ep.rmnet_mode ==
RMNET_EPMODE_BRIDGE) {
rc = rmnet_ingress_deliver_packet(skb, r);
} else {
kfree_skb(skb);
rc = RX_HANDLER_CONSUMED;
}
break;
case ETH_P_IP:
case ETH_P_IPV6:
rc = rmnet_ingress_deliver_packet(skb, r);
break;
default:
rc = RX_HANDLER_PASS;
}
}
return rc;
}
/* Modifies packet as per logical endpoint configuration and egress data format
* for egress device configured in logical endpoint. Packet is then transmitted
* on the egress device.
*/
void rmnet_egress_handler(struct sk_buff *skb,
struct rmnet_endpoint *ep)
{
struct rmnet_real_dev_info *r;
struct net_device *orig_dev;
orig_dev = skb->dev;
skb->dev = ep->egress_dev;
r = rmnet_get_real_dev_info(skb->dev);
if (!r) {
kfree_skb(skb);
return;
}
if (r->egress_data_format & RMNET_EGRESS_FORMAT_MAP) {
switch (rmnet_map_egress_handler(skb, r, ep, orig_dev)) {
case RMNET_MAP_CONSUMED:
return;
case RMNET_MAP_SUCCESS:
break;
default:
kfree_skb(skb);
return;
}
}
if (ep->rmnet_mode == RMNET_EPMODE_VND)
rmnet_vnd_tx_fixup(skb, orig_dev);
dev_queue_xmit(skb);
}
/* Copyright (c) 2013, 2016-2017 The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* RMNET Data ingress/egress handler
*
*/
#ifndef _RMNET_HANDLERS_H_
#define _RMNET_HANDLERS_H_
#include "rmnet_config.h"
void rmnet_egress_handler(struct sk_buff *skb,
struct rmnet_endpoint *ep);
rx_handler_result_t rmnet_rx_handler(struct sk_buff **pskb);
#endif /* _RMNET_HANDLERS_H_ */
/* Copyright (c) 2013-2017, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef _RMNET_MAP_H_
#define _RMNET_MAP_H_
struct rmnet_map_control_command {
u8 command_name;
u8 cmd_type:2;
u8 reserved:6;
u16 reserved2;
u32 transaction_id;
union {
struct {
u16 ip_family:2;
u16 reserved:14;
u16 flow_control_seq_num;
u32 qos_id;
} flow_control;
u8 data[0];
};
} __aligned(1);
enum rmnet_map_results {
RMNET_MAP_SUCCESS,
RMNET_MAP_CONSUMED,
RMNET_MAP_GENERAL_FAILURE,
RMNET_MAP_NOT_ENABLED,
RMNET_MAP_FAILED_AGGREGATION,
RMNET_MAP_FAILED_MUX
};
enum rmnet_map_commands {
RMNET_MAP_COMMAND_NONE,
RMNET_MAP_COMMAND_FLOW_DISABLE,
RMNET_MAP_COMMAND_FLOW_ENABLE,
/* These should always be the last 2 elements */
RMNET_MAP_COMMAND_UNKNOWN,
RMNET_MAP_COMMAND_ENUM_LENGTH
};
struct rmnet_map_header {
u8 pad_len:6;
u8 reserved_bit:1;
u8 cd_bit:1;
u8 mux_id;
u16 pkt_len;
} __aligned(1);
#define RMNET_MAP_GET_MUX_ID(Y) (((struct rmnet_map_header *) \
(Y)->data)->mux_id)
#define RMNET_MAP_GET_CD_BIT(Y) (((struct rmnet_map_header *) \
(Y)->data)->cd_bit)
#define RMNET_MAP_GET_PAD(Y) (((struct rmnet_map_header *) \
(Y)->data)->pad_len)
#define RMNET_MAP_GET_CMD_START(Y) ((struct rmnet_map_control_command *) \
((Y)->data + \
sizeof(struct rmnet_map_header)))
#define RMNET_MAP_GET_LENGTH(Y) (ntohs(((struct rmnet_map_header *) \
(Y)->data)->pkt_len))
#define RMNET_MAP_COMMAND_REQUEST 0
#define RMNET_MAP_COMMAND_ACK 1
#define RMNET_MAP_COMMAND_UNSUPPORTED 2
#define RMNET_MAP_COMMAND_INVALID 3
#define RMNET_MAP_NO_PAD_BYTES 0
#define RMNET_MAP_ADD_PAD_BYTES 1
u8 rmnet_map_demultiplex(struct sk_buff *skb);
struct sk_buff *rmnet_map_deaggregate(struct sk_buff *skb,
struct rmnet_real_dev_info *rdinfo);
struct rmnet_map_header *rmnet_map_add_map_header(struct sk_buff *skb,
int hdrlen, int pad);
rx_handler_result_t rmnet_map_command(struct sk_buff *skb,
struct rmnet_real_dev_info *rdinfo);
#endif /* _RMNET_MAP_H_ */
/* Copyright (c) 2013-2017, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/netdevice.h>
#include "rmnet_config.h"
#include "rmnet_map.h"
#include "rmnet_private.h"
#include "rmnet_vnd.h"
static u8 rmnet_map_do_flow_control(struct sk_buff *skb,
struct rmnet_real_dev_info *rdinfo,
int enable)
{
struct rmnet_map_control_command *cmd;
struct rmnet_endpoint *ep;
struct net_device *vnd;
u16 ip_family;
u16 fc_seq;
u32 qos_id;
u8 mux_id;
int r;
mux_id = RMNET_MAP_GET_MUX_ID(skb);
cmd = RMNET_MAP_GET_CMD_START(skb);
if (mux_id >= RMNET_MAX_LOGICAL_EP) {
kfree_skb(skb);
return RX_HANDLER_CONSUMED;
}
ep = &rdinfo->muxed_ep[mux_id];
vnd = ep->egress_dev;
ip_family = cmd->flow_control.ip_family;
fc_seq = ntohs(cmd->flow_control.flow_control_seq_num);
qos_id = ntohl(cmd->flow_control.qos_id);
/* Ignore the ip family and pass the sequence number for both v4 and v6
* sequence. User space does not support creating dedicated flows for
* the 2 protocols
*/
r = rmnet_vnd_do_flow_control(vnd, enable);
if (r) {
kfree_skb(skb);
return RMNET_MAP_COMMAND_UNSUPPORTED;
} else {
return RMNET_MAP_COMMAND_ACK;
}
}
static void rmnet_map_send_ack(struct sk_buff *skb,
unsigned char type,
struct rmnet_real_dev_info *rdinfo)
{
struct rmnet_map_control_command *cmd;
int xmit_status;
skb->protocol = htons(ETH_P_MAP);
cmd = RMNET_MAP_GET_CMD_START(skb);
cmd->cmd_type = type & 0x03;
netif_tx_lock(skb->dev);
xmit_status = skb->dev->netdev_ops->ndo_start_xmit(skb, skb->dev);
netif_tx_unlock(skb->dev);
}
/* Process MAP command frame and send N/ACK message as appropriate. Message cmd
* name is decoded here and appropriate handler is called.
*/
rx_handler_result_t rmnet_map_command(struct sk_buff *skb,
struct rmnet_real_dev_info *rdinfo)
{
struct rmnet_map_control_command *cmd;
unsigned char command_name;
unsigned char rc = 0;
cmd = RMNET_MAP_GET_CMD_START(skb);
command_name = cmd->command_name;
switch (command_name) {
case RMNET_MAP_COMMAND_FLOW_ENABLE:
rc = rmnet_map_do_flow_control(skb, rdinfo, 1);
break;
case RMNET_MAP_COMMAND_FLOW_DISABLE:
rc = rmnet_map_do_flow_control(skb, rdinfo, 0);
break;
default:
rc = RMNET_MAP_COMMAND_UNSUPPORTED;
kfree_skb(skb);
break;
}
if (rc == RMNET_MAP_COMMAND_ACK)
rmnet_map_send_ack(skb, rc, rdinfo);
return RX_HANDLER_CONSUMED;
}
/* Copyright (c) 2013-2017, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* RMNET Data MAP protocol
*
*/
#include <linux/netdevice.h>
#include "rmnet_config.h"
#include "rmnet_map.h"
#include "rmnet_private.h"
#define RMNET_MAP_DEAGGR_SPACING 64
#define RMNET_MAP_DEAGGR_HEADROOM (RMNET_MAP_DEAGGR_SPACING / 2)
/* Adds MAP header to front of skb->data
* Padding is calculated and set appropriately in MAP header. Mux ID is
* initialized to 0.
*/
struct rmnet_map_header *rmnet_map_add_map_header(struct sk_buff *skb,
int hdrlen, int pad)
{
struct rmnet_map_header *map_header;
u32 padding, map_datalen;
u8 *padbytes;
if (skb_headroom(skb) < sizeof(struct rmnet_map_header))
return NULL;
map_datalen = skb->len - hdrlen;
map_header = (struct rmnet_map_header *)
skb_push(skb, sizeof(struct rmnet_map_header));
memset(map_header, 0, sizeof(struct rmnet_map_header));
if (pad == RMNET_MAP_NO_PAD_BYTES) {
map_header->pkt_len = htons(map_datalen);
return map_header;
}
padding = ALIGN(map_datalen, 4) - map_datalen;
if (padding == 0)
goto done;
if (skb_tailroom(skb) < padding)
return NULL;
padbytes = (u8 *)skb_put(skb, padding);
memset(padbytes, 0, padding);
done:
map_header->pkt_len = htons(map_datalen + padding);
map_header->pad_len = padding & 0x3F;
return map_header;
}
/* Deaggregates a single packet
* A whole new buffer is allocated for each portion of an aggregated frame.
* Caller should keep calling deaggregate() on the source skb until 0 is
* returned, indicating that there are no more packets to deaggregate. Caller
* is responsible for freeing the original skb.
*/
struct sk_buff *rmnet_map_deaggregate(struct sk_buff *skb,
struct rmnet_real_dev_info *rdinfo)
{
struct rmnet_map_header *maph;
struct sk_buff *skbn;
u32 packet_len;
if (skb->len == 0)
return NULL;
maph = (struct rmnet_map_header *)skb->data;
packet_len = ntohs(maph->pkt_len) + sizeof(struct rmnet_map_header);
if (((int)skb->len - (int)packet_len) < 0)
return NULL;
skbn = alloc_skb(packet_len + RMNET_MAP_DEAGGR_SPACING, GFP_ATOMIC);
if (!skbn)
return NULL;
skbn->dev = skb->dev;
skb_reserve(skbn, RMNET_MAP_DEAGGR_HEADROOM);
skb_put(skbn, packet_len);
memcpy(skbn->data, skb->data, packet_len);
skb_pull(skb, packet_len);
/* Some hardware can send us empty frames. Catch them */
if (ntohs(maph->pkt_len) == 0) {
kfree_skb(skb);
return NULL;
}
return skbn;
}
/* Copyright (c) 2013-2014, 2016-2017 The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef _RMNET_PRIVATE_H_
#define _RMNET_PRIVATE_H_
#define RMNET_MAX_VND 32
#define RMNET_MAX_PACKET_SIZE 16384
#define RMNET_DFLT_PACKET_SIZE 1500
#define RMNET_NEEDED_HEADROOM 16
#define RMNET_TX_QUEUE_LEN 1000
/* Constants */
#define RMNET_EGRESS_FORMAT__RESERVED__ BIT(0)
#define RMNET_EGRESS_FORMAT_MAP BIT(1)
#define RMNET_EGRESS_FORMAT_AGGREGATION BIT(2)
#define RMNET_EGRESS_FORMAT_MUXING BIT(3)
#define RMNET_EGRESS_FORMAT_MAP_CKSUMV3 BIT(4)
#define RMNET_EGRESS_FORMAT_MAP_CKSUMV4 BIT(5)
#define RMNET_INGRESS_FIX_ETHERNET BIT(0)
#define RMNET_INGRESS_FORMAT_MAP BIT(1)
#define RMNET_INGRESS_FORMAT_DEAGGREGATION BIT(2)
#define RMNET_INGRESS_FORMAT_DEMUXING BIT(3)
#define RMNET_INGRESS_FORMAT_MAP_COMMANDS BIT(4)
#define RMNET_INGRESS_FORMAT_MAP_CKSUMV3 BIT(5)
#define RMNET_INGRESS_FORMAT_MAP_CKSUMV4 BIT(6)
/* Pass the frame up the stack with no modifications to skb->dev */
#define RMNET_EPMODE_NONE (0)
/* Replace skb->dev to a virtual rmnet device and pass up the stack */
#define RMNET_EPMODE_VND (1)
/* Pass the frame directly to another device with dev_queue_xmit() */
#define RMNET_EPMODE_BRIDGE (2)
#endif /* _RMNET_PRIVATE_H_ */
/* Copyright (c) 2013-2017, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* RMNET Data virtual network driver
*
*/
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include <net/pkt_sched.h>
#include "rmnet_config.h"
#include "rmnet_handlers.h"
#include "rmnet_private.h"
#include "rmnet_map.h"
#include "rmnet_vnd.h"
/* RX/TX Fixup */
void rmnet_vnd_rx_fixup(struct sk_buff *skb, struct net_device *dev)
{
dev->stats.rx_packets++;
dev->stats.rx_bytes += skb->len;
}
void rmnet_vnd_tx_fixup(struct sk_buff *skb, struct net_device *dev)
{
dev->stats.tx_packets++;
dev->stats.tx_bytes += skb->len;
}
/* Network Device Operations */
static netdev_tx_t rmnet_vnd_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
struct rmnet_priv *priv;
priv = netdev_priv(dev);
if (priv->local_ep.egress_dev) {
rmnet_egress_handler(skb, &priv->local_ep);
} else {
dev->stats.tx_dropped++;
kfree_skb(skb);
}
return NETDEV_TX_OK;
}
static int rmnet_vnd_change_mtu(struct net_device *rmnet_dev, int new_mtu)
{
if (new_mtu < 0 || new_mtu > RMNET_MAX_PACKET_SIZE)
return -EINVAL;
rmnet_dev->mtu = new_mtu;
return 0;
}
static const struct net_device_ops rmnet_vnd_ops = {
.ndo_start_xmit = rmnet_vnd_start_xmit,
.ndo_change_mtu = rmnet_vnd_change_mtu,
};
/* Called by kernel whenever a new rmnet<n> device is created. Sets MTU,
* flags, ARP type, needed headroom, etc...
*/
void rmnet_vnd_setup(struct net_device *rmnet_dev)
{
struct rmnet_priv *priv;
priv = netdev_priv(rmnet_dev);
netdev_dbg(rmnet_dev, "Setting up device %s\n", rmnet_dev->name);
rmnet_dev->netdev_ops = &rmnet_vnd_ops;
rmnet_dev->mtu = RMNET_DFLT_PACKET_SIZE;
rmnet_dev->needed_headroom = RMNET_NEEDED_HEADROOM;
random_ether_addr(rmnet_dev->dev_addr);
rmnet_dev->tx_queue_len = RMNET_TX_QUEUE_LEN;
/* Raw IP mode */
rmnet_dev->header_ops = NULL; /* No header */
rmnet_dev->type = ARPHRD_RAWIP;
rmnet_dev->hard_header_len = 0;
rmnet_dev->flags &= ~(IFF_BROADCAST | IFF_MULTICAST);
rmnet_dev->needs_free_netdev = true;
}
/* Exposed API */
int rmnet_vnd_newlink(u8 id, struct net_device *rmnet_dev,
struct rmnet_real_dev_info *r)
{
int rc;
if (r->rmnet_devices[id])
return -EINVAL;
rc = register_netdevice(rmnet_dev);
if (!rc) {
r->rmnet_devices[id] = rmnet_dev;
r->nr_rmnet_devs++;
rmnet_dev->rtnl_link_ops = &rmnet_link_ops;
}
return rc;
}
int rmnet_vnd_dellink(u8 id, struct rmnet_real_dev_info *r)
{
if (id >= RMNET_MAX_VND || !r->rmnet_devices[id])
return -EINVAL;
r->rmnet_devices[id] = NULL;
r->nr_rmnet_devs--;
return 0;
}
u8 rmnet_vnd_get_mux(struct net_device *rmnet_dev)
{
struct rmnet_priv *priv;
priv = netdev_priv(rmnet_dev);
return priv->mux_id;
}
void rmnet_vnd_set_mux(struct net_device *rmnet_dev, u8 mux_id)
{
struct rmnet_priv *priv;
priv = netdev_priv(rmnet_dev);
priv->mux_id = mux_id;
}
/* Gets the logical endpoint configuration for a RmNet virtual network device
* node. Caller should confirm that devices is a RmNet VND before calling.
*/
struct rmnet_endpoint *rmnet_vnd_get_endpoint(struct net_device *rmnet_dev)
{
struct rmnet_priv *priv;
if (!rmnet_dev)
return NULL;
priv = netdev_priv(rmnet_dev);
return &priv->local_ep;
}
int rmnet_vnd_do_flow_control(struct net_device *rmnet_dev, int enable)
{
netdev_dbg(rmnet_dev, "Setting VND TX queue state to %d\n", enable);
/* Although we expect similar number of enable/disable
* commands, optimize for the disable. That is more
* latency sensitive than enable
*/
if (unlikely(enable))
netif_wake_queue(rmnet_dev);
else
netif_stop_queue(rmnet_dev);
return 0;
}
/* Copyright (c) 2013-2017, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* RMNET Data Virtual Network Device APIs
*
*/
#ifndef _RMNET_VND_H_
#define _RMNET_VND_H_
int rmnet_vnd_do_flow_control(struct net_device *dev, int enable);
struct rmnet_endpoint *rmnet_vnd_get_endpoint(struct net_device *dev);
int rmnet_vnd_newlink(u8 id, struct net_device *rmnet_dev,
struct rmnet_real_dev_info *r);
int rmnet_vnd_dellink(u8 id, struct rmnet_real_dev_info *r);
void rmnet_vnd_rx_fixup(struct sk_buff *skb, struct net_device *dev);
void rmnet_vnd_tx_fixup(struct sk_buff *skb, struct net_device *dev);
u8 rmnet_vnd_get_mux(struct net_device *rmnet_dev);
void rmnet_vnd_set_mux(struct net_device *rmnet_dev, u8 mux_id);
void rmnet_vnd_setup(struct net_device *dev);
#endif /* _RMNET_VND_H_ */
...@@ -59,6 +59,7 @@ ...@@ -59,6 +59,7 @@
#define ARPHRD_LAPB 516 /* LAPB */ #define ARPHRD_LAPB 516 /* LAPB */
#define ARPHRD_DDCMP 517 /* Digital's DDCMP protocol */ #define ARPHRD_DDCMP 517 /* Digital's DDCMP protocol */
#define ARPHRD_RAWHDLC 518 /* Raw HDLC */ #define ARPHRD_RAWHDLC 518 /* Raw HDLC */
#define ARPHRD_RAWIP 519 /* Raw IP */
#define ARPHRD_TUNNEL 768 /* IPIP tunnel */ #define ARPHRD_TUNNEL 768 /* IPIP tunnel */
#define ARPHRD_TUNNEL6 769 /* IP6IP6 tunnel */ #define ARPHRD_TUNNEL6 769 /* IP6IP6 tunnel */
......
...@@ -140,6 +140,9 @@ ...@@ -140,6 +140,9 @@
#define ETH_P_IEEE802154 0x00F6 /* IEEE802.15.4 frame */ #define ETH_P_IEEE802154 0x00F6 /* IEEE802.15.4 frame */
#define ETH_P_CAIF 0x00F7 /* ST-Ericsson CAIF protocol */ #define ETH_P_CAIF 0x00F7 /* ST-Ericsson CAIF protocol */
#define ETH_P_XDSA 0x00F8 /* Multiplexed DSA protocol */ #define ETH_P_XDSA 0x00F8 /* Multiplexed DSA protocol */
#define ETH_P_MAP 0x00F9 /* Qualcomm multiplexing and
* aggregation protocol
*/
/* /*
* This is an Ethernet frame header. * This is an Ethernet frame header.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment