ARM: dts: add buffalo linkstation ls-wvl/vl

Add dts file to support Buffalo Linkstation LS-WVL and LS-VL,
which are 3.5" HDD NAS in 2-bay and 1-bay respectively.

[gregory.clement@free-electrons.com: fix typo in pmx-led-function-red]
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Documentation/devicetree/bindings/arm/marvell,kirkwood.txt

@@ -20,6 +20,7 @@ And in addition, the compatible shall be extended with the specific
 board. Currently known boards are:
 
 "buffalo,lschlv2"
+"buffalo,lswvl"
 "buffalo,lswxl"
 "buffalo,lsxhl"
 "buffalo,lsxl"

arch/arm/boot/dts/Makefile

@@ -176,6 +176,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-km_kirkwood.dtb \
 	kirkwood-laplug.dtb \
 	kirkwood-lschlv2.dtb \
+	kirkwood-lswvl.dtb \
 	kirkwood-lswxl.dtb \
 	kirkwood-lsxhl.dtb \
 	kirkwood-mplcec4.dtb \

arch/arm/boot/dts/kirkwood-lswvl.dts

+/*
+ * Device Tree file for Buffalo Linkstation LS-WVL/VL
+ *
+ * Copyright (C) 2015, rogershimizu@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-WVL/VL";
+	compatible = "buffalo,lswvl", "buffalo,lsvl", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd0: pmx-power-hdd0 {
+				marvell,pins = "mpp8";
+				marvell,function = "gpio";
+			};
+			pmx_power_hdd1: pmx-power-hdd1 {
+				marvell,pins = "mpp9";
+				marvell,function = "gpio";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high: pmx-fan-high {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+			pmx_fan_low: pmx-fan-low {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr0: pmx-led-hdderr0 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr1: pmx-led-hdderr1 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function-red {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_fan_lock: pmx-fan-lock {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p40@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p40", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <25000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x60000>;
+					label = "uboot";
+					read-only;
+				};
+
+				partition@60000 {
+					reg = <0x60000 0x10000>;
+					label = "dtb";
+					read-only;
+				};
+
+				partition@70000 {
+					reg = <0x70000 0x10000>;
+					label = "uboot_env";
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_function &pmx_power_switch
+			     &pmx_power_auto_switch>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Function Button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio0 45 GPIO_ACTIVE_LOW>;
+		};
+
+		button@2 {
+			label = "Power-on Switch";
+			linux,code = <KEY_RESERVED>;
+			linux,input-type = <5>;
+			gpios = <&gpio0 46 GPIO_ACTIVE_LOW>;
+		};
+
+		button@3 {
+			label = "Power-auto Switch";
+			linux,code = <KEY_ESC>;
+			linux,input-type = <5>;
+			gpios = <&gpio0 47 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue
+			     &pmx_led_hdderr0
+			     &pmx_led_hdderr1>;
+		pinctrl-names = "default";
+
+		led@1 {
+			label = "lswvl:red:alarm";
+			gpios = <&gpio0 36 GPIO_ACTIVE_LOW>;
+		};
+
+		led@2 {
+			label = "lswvl:red:func";
+			gpios = <&gpio0 37 GPIO_ACTIVE_LOW>;
+		};
+
+		led@3 {
+			label = "lswvl:amber:info";
+			gpios = <&gpio0 38 GPIO_ACTIVE_LOW>;
+		};
+
+		led@4 {
+			label = "lswvl:blue:func";
+			gpios = <&gpio0 39 GPIO_ACTIVE_LOW>;
+		};
+
+		led@5 {
+			label = "lswvl:blue:power";
+			gpios = <&gpio0 40 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		led@6 {
+			label = "lswvl:red:hdderr0";
+			gpios = <&gpio0 34 GPIO_ACTIVE_LOW>;
+		};
+
+		led@7 {
+			label = "lswvl:red:hdderr1";
+			gpios = <&gpio0 35 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+
+		gpios = <&gpio0 17 GPIO_ACTIVE_LOW
+			 &gpio0 16 GPIO_ACTIVE_LOW>;
+
+		gpio-fan,speed-map = <0 3
+				1500 2
+				3250 1
+				5000 0>;
+
+		alarm-gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>;
+	};
+
+	restart_poweroff {
+		compatible = "restart-poweroff";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		hdd_power0: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "HDD0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+		hdd_power1: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "HDD1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};