Commit c463a158 authored by Hans de Goede's avatar Hans de Goede Committed by Wolfram Sang

i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes

acpi_gsb_i2c_write_bytes() returns i2c_transfer()'s return value, which
is the number of transfers executed on success, so 1.

The ACPI code expects us to store 0 in gsb->status for success, not 1.

Specifically this breaks the following code in the Thinkpad 8 DSDT:

            ECWR = I2CW = ECWR /* \_SB_.I2C1.BAT0.ECWR */
            If ((ECST == Zero))
            {
                ECRD = I2CR /* \_SB_.I2C1.I2CR */
            }

Before this commit we set ECST to 1, causing the read to never happen
breaking battery monitoring on the Thinkpad 8.

This commit makes acpi_gsb_i2c_write_bytes() return 0 when i2c_transfer()
returns 1, so the single write transfer completed successfully, and
makes it return -EIO on for other (unexpected) return values >= 0.

Cc: stable@vger.kernel.org
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Acked-by: default avatarMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
parent 0857f508
...@@ -482,11 +482,16 @@ static int acpi_gsb_i2c_write_bytes(struct i2c_client *client, ...@@ -482,11 +482,16 @@ static int acpi_gsb_i2c_write_bytes(struct i2c_client *client,
msgs[0].buf = buffer; msgs[0].buf = buffer;
ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
if (ret < 0)
dev_err(&client->adapter->dev, "i2c write failed\n");
kfree(buffer); kfree(buffer);
return ret;
if (ret < 0) {
dev_err(&client->adapter->dev, "i2c write failed: %d\n", ret);
return ret;
}
/* 1 transfer must have completed successfully */
return (ret == 1) ? 0 : -EIO;
} }
static acpi_status static acpi_status
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment