Commit c59a80ac authored by Ralph Campbell's avatar Ralph Campbell Committed by Roland Dreier

IB/ipath: kreceive uses portdata rather than devdata

kreceive is now portdata * instead of devdata * and other kreceive
related cleanups....
Signed-off-by: default avatarRalph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: default avatarRoland Dreier <rolandd@cisco.com>
parent d65708f3
......@@ -1104,13 +1104,14 @@ static void ipath_rcv_hdrerr(struct ipath_devdata *dd,
/*
* ipath_kreceive - receive a packet
* @dd: the infinipath device
* @pd: the infinipath port
*
* called from interrupt handler for errors or receive interrupt
*/
void ipath_kreceive(struct ipath_devdata *dd)
void ipath_kreceive(struct ipath_portdata *pd)
{
u64 *rc;
struct ipath_devdata *dd = pd->port_dd;
void *ebuf;
const u32 rsize = dd->ipath_rcvhdrentsize; /* words */
const u32 maxcnt = dd->ipath_rcvhdrcnt * rsize; /* words */
......@@ -1125,8 +1126,8 @@ void ipath_kreceive(struct ipath_devdata *dd)
goto bail;
}
l = dd->ipath_port0head;
hdrqtail = (u32) le64_to_cpu(*dd->ipath_hdrqtailptr);
l = pd->port_head;
hdrqtail = ipath_get_rcvhdrtail(pd);
if (l == hdrqtail)
goto bail;
......@@ -1135,7 +1136,7 @@ void ipath_kreceive(struct ipath_devdata *dd)
u32 qp;
u8 *bthbytes;
rc = (u64 *) (dd->ipath_pd[0]->port_rcvhdrq + (l << 2));
rc = (u64 *) (pd->port_rcvhdrq + (l << 2));
hdr = (struct ipath_message_header *)&rc[1];
/*
* could make a network order version of IPATH_KD_QP, and
......@@ -1245,7 +1246,7 @@ void ipath_kreceive(struct ipath_devdata *dd)
* earlier packets, we "almost" guarantee we have covered
* that case.
*/
u32 hqtail = (u32)le64_to_cpu(*dd->ipath_hdrqtailptr);
u32 hqtail = ipath_get_rcvhdrtail(pd);
if (hqtail != hdrqtail) {
hdrqtail = hqtail;
reloop = 1; /* loop 1 extra time at most */
......@@ -1255,7 +1256,7 @@ void ipath_kreceive(struct ipath_devdata *dd)
pkttot += i;
dd->ipath_port0head = l;
pd->port_head = l;
if (pkttot > ipath_stats.sps_maxpkts_call)
ipath_stats.sps_maxpkts_call = pkttot;
......@@ -1605,6 +1606,7 @@ int ipath_create_rcvhdrq(struct ipath_devdata *dd,
/* clear for security and sanity on each use */
memset(pd->port_rcvhdrq, 0, pd->port_rcvhdrq_size);
if (pd->port_rcvhdrtail_kvaddr)
memset(pd->port_rcvhdrtail_kvaddr, 0, PAGE_SIZE);
/*
......
......@@ -742,7 +742,8 @@ static int ipath_manage_rcvq(struct ipath_portdata *pd, unsigned subport,
* updated and correct itself, even in the face of software
* bugs.
*/
*(volatile u64 *)pd->port_rcvhdrtail_kvaddr = 0;
if (pd->port_rcvhdrtail_kvaddr)
ipath_clear_rcvhdrtail(pd);
set_bit(INFINIPATH_R_PORTENABLE_SHIFT + pd->port_port,
&dd->ipath_rcvctrl);
} else
......@@ -1391,7 +1392,10 @@ static unsigned int ipath_poll_next(struct ipath_portdata *pd,
pollflag = ipath_poll_hdrqfull(pd);
head = ipath_read_ureg32(dd, ur_rcvhdrhead, pd->port_port);
tail = *(volatile u64 *)pd->port_rcvhdrtail_kvaddr;
if (pd->port_rcvhdrtail_kvaddr)
tail = ipath_get_rcvhdrtail(pd);
else
tail = ipath_read_ureg32(dd, ur_rcvhdrtail, pd->port_port);
if (head != tail)
pollflag |= POLLIN | POLLRDNORM;
......@@ -1932,7 +1936,8 @@ static int ipath_do_user_init(struct file *fp,
* We explictly set the in-memory copy to 0 beforehand, so we don't
* have to wait to be sure the DMA update has happened.
*/
*(volatile u64 *)pd->port_rcvhdrtail_kvaddr = 0ULL;
if (pd->port_rcvhdrtail_kvaddr)
ipath_clear_rcvhdrtail(pd);
set_bit(INFINIPATH_R_PORTENABLE_SHIFT + pd->port_port,
&dd->ipath_rcvctrl);
ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
......
......@@ -526,12 +526,11 @@ static void enable_chip(struct ipath_devdata *dd,
*/
val = ipath_read_ureg32(dd, ur_rcvegrindextail, 0);
(void)ipath_write_ureg(dd, ur_rcvegrindexhead, val, 0);
dd->ipath_port0head = ipath_read_ureg32(dd, ur_rcvhdrtail, 0);
/* Initialize so we interrupt on next packet received */
(void)ipath_write_ureg(dd, ur_rcvhdrhead,
dd->ipath_rhdrhead_intr_off |
dd->ipath_port0head, 0);
dd->ipath_pd[0]->port_head, 0);
/*
* by now pioavail updates to memory should have occurred, so
......@@ -693,7 +692,7 @@ static int init_housekeeping(struct ipath_devdata *dd,
*/
int ipath_init_chip(struct ipath_devdata *dd, int reinit)
{
int ret = 0, i;
int ret = 0;
u32 val32, kpiobufs;
u32 piobufs, uports;
u64 val;
......@@ -750,7 +749,7 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit)
kpiobufs = ipath_kpiobufs;
if (kpiobufs + (uports * IPATH_MIN_USER_PORT_BUFCNT) > piobufs) {
i = (int) piobufs -
int i = (int) piobufs -
(int) (uports * IPATH_MIN_USER_PORT_BUFCNT);
if (i < 0)
i = 0;
......
......@@ -683,7 +683,7 @@ static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs)
for (i = 0; i < dd->ipath_cfgports; i++) {
struct ipath_portdata *pd = dd->ipath_pd[i];
if (i == 0) {
hd = dd->ipath_port0head;
hd = pd->port_head;
tl = (u32) le64_to_cpu(
*dd->ipath_hdrqtailptr);
} else if (pd && pd->port_cnt &&
......@@ -712,6 +712,8 @@ static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs)
}
}
if (errs & INFINIPATH_E_RRCVEGRFULL) {
struct ipath_portdata *pd = dd->ipath_pd[0];
/*
* since this is of less importance and not likely to
* happen without also getting hdrfull, only count
......@@ -719,7 +721,7 @@ static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs)
* vs user)
*/
ipath_stats.sps_etidfull++;
if (dd->ipath_port0head !=
if (pd->port_head !=
(u32) le64_to_cpu(*dd->ipath_hdrqtailptr))
chkerrpkts = 1;
}
......@@ -1173,7 +1175,7 @@ irqreturn_t ipath_intr(int irq, void *data)
* for receive are at the bottom.
*/
if (chk0rcv) {
ipath_kreceive(dd);
ipath_kreceive(dd->ipath_pd[0]);
istat &= ~port0rbits;
}
......
......@@ -167,6 +167,8 @@ struct ipath_portdata {
u32 active_slaves;
/* Type of packets or conditions we want to poll for */
u16 poll_type;
/* port rcvhdrq head offset */
u32 port_head;
};
struct sk_buff;
......@@ -314,8 +316,6 @@ struct ipath_devdata {
* supports, less gives more pio bufs/port, etc.
*/
u32 ipath_cfgports;
/* port0 rcvhdrq head offset */
u32 ipath_port0head;
/* count of port 0 hdrqfull errors */
u32 ipath_p0_hdrqfull;
......@@ -690,7 +690,7 @@ void ipath_free_pddata(struct ipath_devdata *, struct ipath_portdata *);
int ipath_parse_ushort(const char *str, unsigned short *valp);
void ipath_kreceive(struct ipath_devdata *);
void ipath_kreceive(struct ipath_portdata *);
int ipath_setrcvhdrsize(struct ipath_devdata *, unsigned);
int ipath_reset_device(int);
void ipath_get_faststats(unsigned long);
......@@ -928,6 +928,17 @@ static inline u32 ipath_read_creg32(const struct ipath_devdata *dd,
(char __iomem *)dd->ipath_kregbase));
}
static inline void ipath_clear_rcvhdrtail(const struct ipath_portdata *pd)
{
*((u64 *) pd->port_rcvhdrtail_kvaddr) = 0ULL;
}
static inline u32 ipath_get_rcvhdrtail(const struct ipath_portdata *pd)
{
return (u32) le64_to_cpu(*((volatile __le64 *)
pd->port_rcvhdrtail_kvaddr));
}
/*
* sysfs interface.
*/
......
......@@ -133,15 +133,16 @@ u64 ipath_snap_cntr(struct ipath_devdata *dd, ipath_creg creg)
static void ipath_qcheck(struct ipath_devdata *dd)
{
static u64 last_tot_hdrqfull;
struct ipath_portdata *pd = dd->ipath_pd[0];
size_t blen = 0;
char buf[128];
*buf = 0;
if (dd->ipath_pd[0]->port_hdrqfull != dd->ipath_p0_hdrqfull) {
if (pd->port_hdrqfull != dd->ipath_p0_hdrqfull) {
blen = snprintf(buf, sizeof buf, "port 0 hdrqfull %u",
dd->ipath_pd[0]->port_hdrqfull -
pd->port_hdrqfull -
dd->ipath_p0_hdrqfull);
dd->ipath_p0_hdrqfull = dd->ipath_pd[0]->port_hdrqfull;
dd->ipath_p0_hdrqfull = pd->port_hdrqfull;
}
if (ipath_stats.sps_etidfull != dd->ipath_last_tidfull) {
blen += snprintf(buf + blen, sizeof buf - blen,
......@@ -173,7 +174,7 @@ static void ipath_qcheck(struct ipath_devdata *dd)
if (blen)
ipath_dbg("%s\n", buf);
if (dd->ipath_port0head != (u32)
if (pd->port_head != (u32)
le64_to_cpu(*dd->ipath_hdrqtailptr)) {
if (dd->ipath_lastport0rcv_cnt ==
ipath_stats.sps_port0pkts) {
......@@ -181,7 +182,7 @@ static void ipath_qcheck(struct ipath_devdata *dd)
"port0 hd=%llx tl=%x; port0pkts %llx\n",
(unsigned long long)
le64_to_cpu(*dd->ipath_hdrqtailptr),
dd->ipath_port0head,
pd->port_head,
(unsigned long long)
ipath_stats.sps_port0pkts);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment