staging: usbip: reformat function stub_recv_cmd_unlink()

Reformat function stub_recv_cmd_unlink() to improve readability.
Signed-off-by: Kurt Kanzenbach <ly80toro@cip.cs.fau.de>
Signed-off-by: Stefan Reif <ke42caxa@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/usbip/stub_rx.c

@@ -228,61 +228,61 @@ static void tweak_special_requests(struct urb *urb)
 static int stub_recv_cmd_unlink(struct stub_device *sdev,
 				struct usbip_header *pdu)
 {
+	int ret;
 	unsigned long flags;
-
 	struct stub_priv *priv;
 
 	spin_lock_irqsave(&sdev->priv_lock, flags);
 
 	list_for_each_entry(priv, &sdev->priv_init, list) {
-		if (priv->seqnum == pdu->u.cmd_unlink.seqnum) {
-			int ret;
-
-			dev_info(&priv->urb->dev->dev, "unlink urb %p\n",
-				 priv->urb);
-
-			/*
-			 * This matched urb is not completed yet (i.e., be in
-			 * flight in usb hcd hardware/driver). Now we are
-			 * cancelling it. The unlinking flag means that we are
-			 * now not going to return the normal result pdu of a
-			 * submission request, but going to return a result pdu
-			 * of the unlink request.
-			 */
-			priv->unlinking = 1;
-
-			/*
-			 * In the case that unlinking flag is on, prev->seqnum
-			 * is changed from the seqnum of the cancelling urb to
-			 * the seqnum of the unlink request. This will be used
-			 * to make the result pdu of the unlink request.
-			 */
-			priv->seqnum = pdu->base.seqnum;
-
-			spin_unlock_irqrestore(&sdev->priv_lock, flags);
-
-			/*
-			 * usb_unlink_urb() is now out of spinlocking to avoid
-			 * spinlock recursion since stub_complete() is
-			 * sometimes called in this context but not in the
-			 * interrupt context.  If stub_complete() is executed
-			 * before we call usb_unlink_urb(), usb_unlink_urb()
-			 * will return an error value. In this case, stub_tx
-			 * will return the result pdu of this unlink request
-			 * though submission is completed and actual unlinking
-			 * is not executed. OK?
-			 */
-			/* In the above case, urb->status is not -ECONNRESET,
-			 * so a driver in a client host will know the failure
-			 * of the unlink request ?
-			 */
-			ret = usb_unlink_urb(priv->urb);
-			if (ret != -EINPROGRESS)
-				dev_err(&priv->urb->dev->dev,
-					"failed to unlink a urb %p, ret %d\n",
-					priv->urb, ret);
-			return 0;
-		}
+		if (priv->seqnum != pdu->u.cmd_unlink.seqnum)
+			continue;
+
+		dev_info(&priv->urb->dev->dev, "unlink urb %p\n",
+			 priv->urb);
+
+		/*
+		 * This matched urb is not completed yet (i.e., be in
+		 * flight in usb hcd hardware/driver). Now we are
+		 * cancelling it. The unlinking flag means that we are
+		 * now not going to return the normal result pdu of a
+		 * submission request, but going to return a result pdu
+		 * of the unlink request.
+		 */
+		priv->unlinking = 1;
+
+		/*
+		 * In the case that unlinking flag is on, prev->seqnum
+		 * is changed from the seqnum of the cancelling urb to
+		 * the seqnum of the unlink request. This will be used
+		 * to make the result pdu of the unlink request.
+		 */
+		priv->seqnum = pdu->base.seqnum;
+
+		spin_unlock_irqrestore(&sdev->priv_lock, flags);
+
+		/*
+		 * usb_unlink_urb() is now out of spinlocking to avoid
+		 * spinlock recursion since stub_complete() is
+		 * sometimes called in this context but not in the
+		 * interrupt context.  If stub_complete() is executed
+		 * before we call usb_unlink_urb(), usb_unlink_urb()
+		 * will return an error value. In this case, stub_tx
+		 * will return the result pdu of this unlink request
+		 * though submission is completed and actual unlinking
+		 * is not executed. OK?
+		 */
+		/* In the above case, urb->status is not -ECONNRESET,
+		 * so a driver in a client host will know the failure
+		 * of the unlink request ?
+		 */
+		ret = usb_unlink_urb(priv->urb);
+		if (ret != -EINPROGRESS)
+			dev_err(&priv->urb->dev->dev,
+				"failed to unlink a urb %p, ret %d\n",
+				priv->urb, ret);
+
+		return 0;
 	}
 
 	usbip_dbg_stub_rx("seqnum %d is not pending\n",