ep93xx video driver platform support

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Daniele Venzano <linux@brownhat.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/arm/mach-ep93xx/clock.c

@@ -37,7 +37,7 @@ struct clk {
 static unsigned long get_uart_rate(struct clk *clk);
 
 static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
-
+static int set_div_rate(struct clk *clk, unsigned long rate);
 
 static struct clk clk_uart1 = {
 	.sw_locked	= 1,
@@ -76,6 +76,13 @@ static struct clk clk_pwm = {
 	.rate		= EP93XX_EXT_CLK_RATE,
 };
 
+static struct clk clk_video = {
+	.sw_locked	= 1,
+	.enable_reg     = EP93XX_SYSCON_VIDCLKDIV,
+	.enable_mask    = EP93XX_SYSCON_CLKDIV_ENABLE,
+	.set_rate	= set_div_rate,
+};
+
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
@@ -140,6 +147,7 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL,			"pll2",		&clk_pll2),
 	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),
 	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
+	INIT_CK("ep93xx-fb",		NULL,		&clk_video),
 	INIT_CK(NULL,			"pwm_clk",	&clk_pwm),
 	INIT_CK(NULL,			"m2p0",		&clk_m2p0),
 	INIT_CK(NULL,			"m2p1",		&clk_m2p1),
@@ -236,6 +244,84 @@ static int set_keytchclk_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
+static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
+				  int *pdiv, int *div)
+{
+	unsigned long max_rate, best_rate = 0,
+		actual_rate = 0, mclk_rate = 0, rate_err = -1;
+	int i, found = 0, __div = 0, __pdiv = 0;
+
+	/* Don't exceed the maximum rate */
+	max_rate = max(max(clk_pll1.rate / 4, clk_pll2.rate / 4),
+		       (unsigned long)EP93XX_EXT_CLK_RATE / 4);
+	rate = min(rate, max_rate);
+
+	/*
+	 * Try the two pll's and the external clock
+	 * Because the valid predividers are 2, 2.5 and 3, we multiply
+	 * all the clocks by 2 to avoid floating point math.
+	 *
+	 * This is based on the algorithm in the ep93xx raster guide:
+	 * http://be-a-maverick.com/en/pubs/appNote/AN269REV1.pdf
+	 *
+	 */
+	for (i = 0; i < 3; i++) {
+		if (i == 0)
+			mclk_rate = EP93XX_EXT_CLK_RATE * 2;
+		else if (i == 1)
+			mclk_rate = clk_pll1.rate * 2;
+		else if (i == 2)
+			mclk_rate = clk_pll2.rate * 2;
+
+		/* Try each predivider value */
+		for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
+			__div = mclk_rate / (rate * __pdiv);
+			if (__div < 2 || __div > 127)
+				continue;
+
+			actual_rate = mclk_rate / (__pdiv * __div);
+
+			if (!found || abs(actual_rate - rate) < rate_err) {
+				*pdiv = __pdiv - 3;
+				*div = __div;
+				*psel = (i == 2);
+				*esel = (i != 0);
+				best_rate = actual_rate;
+				rate_err = abs(actual_rate - rate);
+				found = 1;
+			}
+		}
+	}
+
+	if (!found)
+		return 0;
+
+	return best_rate;
+}
+
+static int set_div_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long actual_rate;
+	int psel = 0, esel = 0, pdiv = 0, div = 0;
+	u32 val;
+
+	actual_rate = calc_clk_div(rate, &psel, &esel, &pdiv, &div);
+	if (actual_rate == 0)
+		return -EINVAL;
+	clk->rate = actual_rate;
+
+	/* Clear the esel, psel, pdiv and div bits */
+	val = __raw_readl(clk->enable_reg);
+	val &= ~0x7fff;
+
+	/* Set the new esel, psel, pdiv and div bits for the new clock rate */
+	val |= (esel ? EP93XX_SYSCON_CLKDIV_ESEL : 0) |
+		(psel ? EP93XX_SYSCON_CLKDIV_PSEL : 0) |
+		(pdiv << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | div;
+	ep93xx_syscon_swlocked_write(val, clk->enable_reg);
+	return 0;
+}
+
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
 	if (clk->set_rate)

arch/arm/mach-ep93xx/core.c

@@ -30,6 +30,7 @@
 #include <linux/i2c-gpio.h>
 
 #include <mach/hardware.h>
+#include <mach/fb.h>
 
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -682,6 +683,37 @@ void ep93xx_pwm_release_gpio(struct platform_device *pdev)
 EXPORT_SYMBOL(ep93xx_pwm_release_gpio);
 
 
+/*************************************************************************
+ * EP93xx video peripheral handling
+ *************************************************************************/
+static struct ep93xxfb_mach_info ep93xxfb_data;
+
+static struct resource ep93xx_fb_resource[] = {
+	{
+		.start		= EP93XX_RASTER_PHYS_BASE,
+		.end		= EP93XX_RASTER_PHYS_BASE + 0x800 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ep93xx_fb_device = {
+	.name			= "ep93xx-fb",
+	.id			= -1,
+	.dev			= {
+		.platform_data	= &ep93xxfb_data,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.dma_mask		= &ep93xx_fb_device.dev.coherent_dma_mask,
+	},
+	.num_resources		= ARRAY_SIZE(ep93xx_fb_resource),
+	.resource		= ep93xx_fb_resource,
+};
+
+void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
+{
+	ep93xxfb_data = *data;
+	platform_device_register(&ep93xx_fb_device);
+}
+
 extern void ep93xx_gpio_init(void);
 
 void __init ep93xx_init_devices(void)

arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h

@@ -70,6 +70,7 @@
 #define EP93XX_USB_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00020000)
 #define EP93XX_USB_BASE			EP93XX_AHB_IOMEM(0x00020000)
 
+#define EP93XX_RASTER_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00030000)
 #define EP93XX_RASTER_BASE		EP93XX_AHB_IOMEM(0x00030000)
 
 #define EP93XX_GRAPHICS_ACCEL_BASE	EP93XX_AHB_IOMEM(0x00040000)
@@ -207,6 +208,11 @@
 #define EP93XX_SYSCON_DEVCFG_ADCPD	(1<<2)
 #define EP93XX_SYSCON_DEVCFG_KEYS	(1<<1)
 #define EP93XX_SYSCON_DEVCFG_SHENA	(1<<0)
+#define EP93XX_SYSCON_VIDCLKDIV		EP93XX_SYSCON_REG(0x84)
+#define EP93XX_SYSCON_CLKDIV_ENABLE	(1<<15)
+#define EP93XX_SYSCON_CLKDIV_ESEL	(1<<14)
+#define EP93XX_SYSCON_CLKDIV_PSEL	(1<<13)
+#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT	8
 #define EP93XX_SYSCON_KEYTCHCLKDIV	EP93XX_SYSCON_REG(0x90)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN	(1<<31)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV	(1<<16)

arch/arm/mach-ep93xx/include/mach/fb.h

+/*
+ * arch/arm/mach-ep93xx/include/mach/fb.h
+ */
+
+#ifndef __ASM_ARCH_EP93XXFB_H
+#define __ASM_ARCH_EP93XXFB_H
+
+struct platform_device;
+struct fb_videomode;
+struct fb_info;
+
+#define EP93XXFB_USE_MODEDB		0
+
+/* VideoAttributes flags */
+#define EP93XXFB_STATE_MACHINE_ENABLE	(1 << 0)
+#define EP93XXFB_PIXEL_CLOCK_ENABLE	(1 << 1)
+#define EP93XXFB_VSYNC_ENABLE		(1 << 2)
+#define EP93XXFB_PIXEL_DATA_ENABLE	(1 << 3)
+#define EP93XXFB_COMPOSITE_SYNC		(1 << 4)
+#define EP93XXFB_SYNC_VERT_HIGH		(1 << 5)
+#define EP93XXFB_SYNC_HORIZ_HIGH	(1 << 6)
+#define EP93XXFB_SYNC_BLANK_HIGH	(1 << 7)
+#define EP93XXFB_PCLK_FALLING		(1 << 8)
+#define EP93XXFB_ENABLE_AC		(1 << 9)
+#define EP93XXFB_ENABLE_LCD		(1 << 10)
+#define EP93XXFB_ENABLE_CCIR		(1 << 12)
+#define EP93XXFB_USE_PARALLEL_INTERFACE	(1 << 13)
+#define EP93XXFB_ENABLE_INTERRUPT	(1 << 14)
+#define EP93XXFB_USB_INTERLACE		(1 << 16)
+#define EP93XXFB_USE_EQUALIZATION	(1 << 17)
+#define EP93XXFB_USE_DOUBLE_HORZ	(1 << 18)
+#define EP93XXFB_USE_DOUBLE_VERT	(1 << 19)
+#define EP93XXFB_USE_BLANK_PIXEL	(1 << 20)
+#define EP93XXFB_USE_SDCSN0		(0 << 21)
+#define EP93XXFB_USE_SDCSN1		(1 << 21)
+#define EP93XXFB_USE_SDCSN2		(2 << 21)
+#define EP93XXFB_USE_SDCSN3		(3 << 21)
+
+#define EP93XXFB_ENABLE			(EP93XXFB_STATE_MACHINE_ENABLE	| \
+					 EP93XXFB_PIXEL_CLOCK_ENABLE	| \
+					 EP93XXFB_VSYNC_ENABLE		| \
+					 EP93XXFB_PIXEL_DATA_ENABLE)
+
+struct ep93xxfb_mach_info {
+	unsigned int			num_modes;
+	const struct fb_videomode	*modes;
+	const struct fb_videomode	*default_mode;
+	int				bpp;
+	unsigned int			flags;
+
+	int	(*setup)(struct platform_device *pdev);
+	void	(*teardown)(struct platform_device *pdev);
+	void	(*blank)(int blank_mode, struct fb_info *info);
+};
+
+#endif /* __ASM_ARCH_EP93XXFB_H */

arch/arm/mach-ep93xx/include/mach/platform.h

@@ -6,6 +6,7 @@
 
 struct i2c_board_info;
 struct platform_device;
+struct ep93xxfb_mach_info;
 
 struct ep93xx_eth_data
 {
@@ -33,6 +34,7 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
 
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
 void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
 void ep93xx_register_pwm(int pwm0, int pwm1);
 int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
 void ep93xx_pwm_release_gpio(struct platform_device *pdev);