Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  Revert "USB: Reset USB 3.0 devices on (re)discovery"
  USB: musb: omap2430: fix kernel panic on reboot
  sierra: add new ID for Airprime/Sierra USB IP modem
  USB: serial/usb_wwan, fix tty NULL dereference
  USB: Reset USB 3.0 devices on (re)discovery
  USB: Add quirk for Samsung Android phone modem
  USB: Add Samsung SGH-I500/Android modem ID switch to visor driver
  USB: add quirks entry for Keytouch QWERTY Panel
  usb: musb: omap2430: fix kernel panic on reboot
  usb: musb: fix build breakage

drivers/usb/core/quirks.c

@@ -48,6 +48,10 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x04b4, 0x0526), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },
 
+	/* Samsung Android phone modem - ID conflict with SPH-I500 */
+	{ USB_DEVICE(0x04e8, 0x6601), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
 	/* Roland SC-8820 */
 	{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
 
@@ -68,6 +72,10 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* M-Systems Flash Disk Pioneers */
 	{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Keytouch QWERTY Panel keyboard */
+	{ USB_DEVICE(0x0926, 0x3333), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
 	/* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */
 	{ USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },
 

drivers/usb/musb/musb_core.h

@@ -488,6 +488,15 @@ struct musb {
 	unsigned		set_address:1;
 	unsigned		test_mode:1;
 	unsigned		softconnect:1;
+
+	u8			address;
+	u8			test_mode_nr;
+	u16			ackpend;		/* ep0 */
+	enum musb_g_ep0_state	ep0_state;
+	struct usb_gadget	g;			/* the gadget */
+	struct usb_gadget_driver *gadget_driver;	/* its driver */
+#endif
+
 	/*
 	 * FIXME: Remove this flag.
 	 *
@@ -501,14 +510,6 @@ struct musb {
 	 */
 	unsigned                double_buffer_not_ok:1 __deprecated;
 
-	u8			address;
-	u8			test_mode_nr;
-	u16			ackpend;		/* ep0 */
-	enum musb_g_ep0_state	ep0_state;
-	struct usb_gadget	g;			/* the gadget */
-	struct usb_gadget_driver *gadget_driver;	/* its driver */
-#endif
-
 	struct musb_hdrc_config	*config;
 
 #ifdef MUSB_CONFIG_PROC_FS

drivers/usb/musb/omap2430.c

@@ -362,6 +362,7 @@ static int omap2430_musb_init(struct musb *musb)
 
 static int omap2430_musb_exit(struct musb *musb)
 {
+	del_timer_sync(&musb_idle_timer);
 
 	omap2430_low_level_exit(musb);
 	otg_put_transceiver(musb->xceiv);

drivers/usb/serial/sierra.c

@@ -301,6 +301,9 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1199, 0x68A3), 	/* Sierra Wireless Direct IP modems */
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
+	{ USB_DEVICE(0x0f3d, 0x68A3), 	/* Airprime/Sierra Wireless Direct IP modems */
+	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+	},
        { USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */
 
 	{ }

drivers/usb/serial/usb_wwan.c

@@ -295,12 +295,15 @@ static void usb_wwan_indat_callback(struct urb *urb)
 		    __func__, status, endpoint);
 	} else {
 		tty = tty_port_tty_get(&port->port);
-		if (urb->actual_length) {
-			tty_insert_flip_string(tty, data, urb->actual_length);
-			tty_flip_buffer_push(tty);
-		} else
-			dbg("%s: empty read urb received", __func__);
-		tty_kref_put(tty);
+		if (tty) {
+			if (urb->actual_length) {
+				tty_insert_flip_string(tty, data,
+						urb->actual_length);
+				tty_flip_buffer_push(tty);
+			} else
+				dbg("%s: empty read urb received", __func__);
+			tty_kref_put(tty);
+		}
 
 		/* Resubmit urb so we continue receiving */
 		if (status != -ESHUTDOWN) {

drivers/usb/serial/visor.c

@@ -27,6 +27,7 @@
 #include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
+#include <linux/usb/cdc.h>
 #include "visor.h"
 
 /*
@@ -479,6 +480,17 @@ static int visor_probe(struct usb_serial *serial,
 
 	dbg("%s", __func__);
 
+	/*
+	 * some Samsung Android phones in modem mode have the same ID
+	 * as SPH-I500, but they are ACM devices, so dont bind to them
+	 */
+	if (id->idVendor == SAMSUNG_VENDOR_ID &&
+		id->idProduct == SAMSUNG_SPH_I500_ID &&
+		serial->dev->descriptor.bDeviceClass == USB_CLASS_COMM &&
+		serial->dev->descriptor.bDeviceSubClass ==
+			USB_CDC_SUBCLASS_ACM)
+		return -ENODEV;
+
 	if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
 		dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
 			serial->dev->actconfig->desc.bConfigurationValue);