drm/i915: Program MBUS with rmw during initialization

It wasn't terribly clear from the bspec's wording, but after discussion
with the hardware folks, it turns out that we need to preserve the
pre-existing contents of the MBUS ABOX control register when
initializing a few specific bits.

Bspec: 49213
Bspec: 50096
Fixes: 4cb4585e ("drm/i915/icl: initialize MBus during display init")
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200204011032.582737-1-matthew.d.roper@intel.comReviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
(cherry picked from commit 837b63e6)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228004320.127142-1-matthew.d.roper@intel.com

drivers/gpu/drm/i915/display/intel_display_power.c

@@ -4466,13 +4466,19 @@ static void icl_dbuf_disable(struct drm_i915_private *dev_priv)
 
 static void icl_mbus_init(struct drm_i915_private *dev_priv)
 {
-	u32 val;
+	u32 mask, val;
+
+	mask = MBUS_ABOX_BT_CREDIT_POOL1_MASK |
+		MBUS_ABOX_BT_CREDIT_POOL2_MASK |
+		MBUS_ABOX_B_CREDIT_MASK |
+		MBUS_ABOX_BW_CREDIT_MASK;
 
-	val = MBUS_ABOX_BT_CREDIT_POOL1(16) |
+	val = I915_READ(MBUS_ABOX_CTL);
+	val &= ~mask;
+	val |= MBUS_ABOX_BT_CREDIT_POOL1(16) |
 		MBUS_ABOX_BT_CREDIT_POOL2(16) |
 		MBUS_ABOX_B_CREDIT(1) |
 		MBUS_ABOX_BW_CREDIT(1);
-
 	I915_WRITE(MBUS_ABOX_CTL, val);
 }